IB/ipath: Head of Line blocking vs forward progress of user apps

There's a conflict between our need to quiesce PSM-based applications
to avoid HoL blocking when the IB link goes down and the apps' desire
to remain running so that their quiescence timout mechanism can keep
running.

The compromise is to STOP the processes for a fixed period of time and
then alternate between CONT and STOP until the link is again active.

If there are poor interactions with subnet manager configuration at a
given site, the interval can be adjusted via a module paramter.

Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 136 insertions, 151 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index ed2a227ceced..dde5dfc9fcf5 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 
 #include "ipath_kernel.h"
 #include "ipath_verbs.h"
@@ -256,24 +257,20 @@ void ipath_format_hwerrors(u64 hwerrs,
 }
 
 /* return the strings for the most common link states */
-static char *ib_linkstate(u32 linkstate)
+static char *ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
 {
 	char *ret;
+	u32 state;
 
-	switch (linkstate) {
-	case IPATH_IBSTATE_INIT:
+	state = ipath_ib_state(dd, ibcs);
+	if (state == dd->ib_init)
 		ret = "Init";
-		break;
-	case IPATH_IBSTATE_ARM:
+	else if (state == dd->ib_arm)
 		ret = "Arm";
-		break;
-	case IPATH_IBSTATE_ACTIVE:
+	else if (state == dd->ib_active)
 		ret = "Active";
-		break;
-	default:
+	else
 		ret = "Down";
-	}
-
 	return ret;
 }
 
@@ -288,103 +285,137 @@ void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev)
 }
 
 static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
-				     ipath_err_t errs, int noprint)
+				     ipath_err_t errs)
 {
-	u64 val;
-	u32 ltstate, lstate;
+	u32 ltstate, lstate, ibstate, lastlstate;
+	u32 init = dd->ib_init;
+	u32 arm = dd->ib_arm;
+	u32 active = dd->ib_active;
+	const u64 ibcs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+
+	lstate = ipath_ib_linkstate(dd, ibcs); /* linkstate */
+	ibstate = ipath_ib_state(dd, ibcs);
+	/* linkstate at last interrupt */
+	lastlstate = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
+	ltstate = ipath_ib_linktrstate(dd, ibcs); /* linktrainingtate */
 
 	/*
-	 * even if diags are enabled, we want to notice LINKINIT, etc.
-	 * We just don't want to change the LED state, or
-	 * dd->ipath_kregs->kr_ibcctrl
+	 * if linkstate transitions into INIT from any of the various down
+	 * states, or if it transitions from any of the up (INIT or better)
+	 * states into any of the down states (except link recovery), then
+	 * call the chip-specific code to take appropriate actions.
 	 */
-	val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
-	lstate = val & IPATH_IBSTATE_MASK;
+	if (lstate >= INFINIPATH_IBCS_L_STATE_INIT &&
+		lastlstate == INFINIPATH_IBCS_L_STATE_DOWN) {
+		/* transitioned to UP */
+		if (dd->ipath_f_ib_updown(dd, 1, ibcs)) {
+			ipath_cdbg(LINKVERB, "LinkUp handled, skipped\n");
+			goto skip_ibchange; /* chip-code handled */
+		}
+	} else if ((lastlstate >= INFINIPATH_IBCS_L_STATE_INIT ||
+		(dd->ipath_flags & IPATH_IB_FORCE_NOTIFY)) &&
+		ltstate <= INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE &&
+		ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+		int handled;
+		handled = dd->ipath_f_ib_updown(dd, 0, ibcs);
+		dd->ipath_flags &= ~IPATH_IB_FORCE_NOTIFY;
+		if (handled) {
+			ipath_cdbg(LINKVERB, "LinkDown handled, skipped\n");
+			goto skip_ibchange; /* chip-code handled */
+		}
+	}
 
 	/*
-	 * this is confusing enough when it happens that I want to always put it
-	 * on the console and in the logs.  If it was a requested state change,
-	 * we'll have already cleared the flags, so we won't print this warning
+	 * Significant enough to always print and get into logs, if it was
+	 * unexpected.  If it was a requested state change, we'll have
+	 * already cleared the flags, so we won't print this warning
 	 */
-	if ((lstate != IPATH_IBSTATE_ARM && lstate != IPATH_IBSTATE_ACTIVE)
-		&& (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
-		dev_info(&dd->pcidev->dev, "Link state changed from %s to %s\n",
-				 (dd->ipath_flags & IPATH_LINKARMED) ? "ARM" : "ACTIVE",
-				 ib_linkstate(lstate));
-		/*
-		 * Flush all queued sends when link went to DOWN or INIT,
-		 * to be sure that they don't block SMA and other MAD packets
-		 */
-		ipath_cancel_sends(dd, 1);
-	}
-	else if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
-	    lstate == IPATH_IBSTATE_ACTIVE) {
-		/*
-		 * only print at SMA if there is a change, debug if not
-		 * (sometimes we want to know that, usually not).
-		 */
-		if (lstate == ((unsigned) dd->ipath_lastibcstat
-			       & IPATH_IBSTATE_MASK)) {
-			ipath_dbg("Status change intr but no change (%s)\n",
-				  ib_linkstate(lstate));
-		}
-		else
-			ipath_cdbg(VERBOSE, "Unit %u link state %s, last "
-				   "was %s\n", dd->ipath_unit,
-				   ib_linkstate(lstate),
-				   ib_linkstate((unsigned)
-						dd->ipath_lastibcstat
-						& IPATH_IBSTATE_MASK));
-	}
-	else {
-		lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
-		if (lstate == IPATH_IBSTATE_INIT ||
-		    lstate == IPATH_IBSTATE_ARM ||
-		    lstate == IPATH_IBSTATE_ACTIVE)
-			ipath_cdbg(VERBOSE, "Unit %u link state down"
-				   " (state 0x%x), from %s\n",
-				   dd->ipath_unit,
-				   (u32)val & IPATH_IBSTATE_MASK,
-				   ib_linkstate(lstate));
-		else
-			ipath_cdbg(VERBOSE, "Unit %u link state changed "
-				   "to 0x%x from down (%x)\n",
-				   dd->ipath_unit, (u32) val, lstate);
+	if ((ibstate != arm && ibstate != active) &&
+	    (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
+		dev_info(&dd->pcidev->dev, "Link state changed from %s "
+			 "to %s\n", (dd->ipath_flags & IPATH_LINKARMED) ?
+			 "ARM" : "ACTIVE", ib_linkstate(dd, ibcs));
 	}
-	ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
-		INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
-	lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
-		INFINIPATH_IBCS_LINKSTATE_MASK;
 
 	if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
 	    ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
-		u32 last_ltstate;
-
+		u32 lastlts;
+		lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
 		/*
-		 * Ignore cycling back and forth from Polling.Active
-		 * to Polling.Quiet while waiting for the other end of
-		 * the link to come up. We will cycle back and forth
-		 * between them if no cable is plugged in,
-		 * the other device is powered off or disabled, etc.
+		 * Ignore cycling back and forth from Polling.Active to
+		 * Polling.Quiet while waiting for the other end of the link
+		 * to come up, except to try and decide if we are connected
+		 * to a live IB device or not.  We will cycle back and
+		 * forth between them if no cable is plugged in, the other
+		 * device is powered off or disabled, etc.
 		 */
-		last_ltstate = (dd->ipath_lastibcstat >>
-				INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
-			& INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
-		if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
-		    || last_ltstate ==
-		    INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
-			if (dd->ipath_ibpollcnt > 40) {
+		if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+		    lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+			if (++dd->ipath_ibpollcnt == 40) {
 				dd->ipath_flags |= IPATH_NOCABLE;
 				*dd->ipath_statusp |=
 					IPATH_STATUS_IB_NOCABLE;
-			} else
-				dd->ipath_ibpollcnt++;
+				ipath_cdbg(LINKVERB, "Set NOCABLE\n");
+			}
+			ipath_cdbg(LINKVERB, "POLL change to %s (%x)\n",
+				ipath_ibcstatus_str[ltstate], ibstate);
 			goto skip_ibchange;
 		}
 	}
-	dd->ipath_ibpollcnt = 0;	/* some state other than 2 or 3 */
+
+	dd->ipath_ibpollcnt = 0; /* not poll*, now */
 	ipath_stats.sps_iblink++;
-	if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+
+	if (ibstate == init || ibstate == arm || ibstate == active) {
+		*dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
+		if (ibstate == init || ibstate == arm) {
+			*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+			if (dd->ipath_flags & IPATH_LINKACTIVE)
+				signal_ib_event(dd, IB_EVENT_PORT_ERR);
+		}
+		if (ibstate == arm) {
+			dd->ipath_flags |= IPATH_LINKARMED;
+			dd->ipath_flags &= ~(IPATH_LINKUNK |
+				IPATH_LINKINIT | IPATH_LINKDOWN |
+				IPATH_LINKACTIVE | IPATH_NOCABLE);
+			ipath_hol_down(dd);
+		} else  if (ibstate == init) {
+			/*
+			 * set INIT and DOWN.  Down is checked by
+			 * most of the other code, but INIT is
+			 * useful to know in a few places.
+			 */
+			dd->ipath_flags |= IPATH_LINKINIT |
+				IPATH_LINKDOWN;
+			dd->ipath_flags &= ~(IPATH_LINKUNK |
+				IPATH_LINKARMED | IPATH_LINKACTIVE |
+				IPATH_NOCABLE);
+			ipath_hol_down(dd);
+		} else {  /* active */
+			*dd->ipath_statusp |=
+				IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
+			dd->ipath_flags |= IPATH_LINKACTIVE;
+			dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+				| IPATH_LINKDOWN | IPATH_LINKARMED |
+				IPATH_NOCABLE);
+			signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
+			/* LED active not handled in chip _f_updown */
+			dd->ipath_f_setextled(dd, lstate, ltstate);
+			ipath_hol_up(dd);
+		}
+
+		/*
+		 * print after we've already done the work, so as not to
+		 * delay the state changes and notifications, for debugging
+		 */
+		if (lstate == lastlstate)
+			ipath_cdbg(LINKVERB, "Unchanged from last: %s "
+				"(%x)\n", ib_linkstate(dd, ibcs), ibstate);
+		else
+			ipath_cdbg(VERBOSE, "Unit %u: link up to %s %s (%x)\n",
+				  dd->ipath_unit, ib_linkstate(dd, ibcs),
+				  ipath_ibcstatus_str[ltstate],  ibstate);
+	} else { /* down */
 		if (dd->ipath_flags & IPATH_LINKACTIVE)
 			signal_ib_event(dd, IB_EVENT_PORT_ERR);
 		dd->ipath_flags |= IPATH_LINKDOWN;
@@ -393,65 +424,22 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 				     IPATH_LINKARMED);
 		*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
 		dd->ipath_lli_counter = 0;
-		if (!noprint) {
-			if (((dd->ipath_lastibcstat >>
-			      INFINIPATH_IBCS_LINKSTATE_SHIFT) &
-			     INFINIPATH_IBCS_LINKSTATE_MASK)
-			    == INFINIPATH_IBCS_L_STATE_ACTIVE)
-				/* if from up to down be more vocal */
-				ipath_cdbg(VERBOSE,
-					   "Unit %u link now down (%s)\n",
-					   dd->ipath_unit,
-					   ipath_ibcstatus_str[ltstate]);
-			else
-				ipath_cdbg(VERBOSE, "Unit %u link is "
-					   "down (%s)\n", dd->ipath_unit,
-					   ipath_ibcstatus_str[ltstate]);
-		}
 
-		dd->ipath_f_setextled(dd, lstate, ltstate);
-	} else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
-		dd->ipath_flags |= IPATH_LINKACTIVE;
-		dd->ipath_flags &=
-			~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
-			  IPATH_LINKARMED | IPATH_NOCABLE);
-		*dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
-		*dd->ipath_statusp |=
-			IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
-		dd->ipath_f_setextled(dd, lstate, ltstate);
-		signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
-	} else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
-		if (dd->ipath_flags & IPATH_LINKACTIVE)
-			signal_ib_event(dd, IB_EVENT_PORT_ERR);
-		/*
-		 * set INIT and DOWN.  Down is checked by most of the other
-		 * code, but INIT is useful to know in a few places.
-		 */
-		dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
-		dd->ipath_flags &=
-			~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
-			  | IPATH_NOCABLE);
-		*dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
-					| IPATH_STATUS_IB_READY);
-		dd->ipath_f_setextled(dd, lstate, ltstate);
-	} else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
-		if (dd->ipath_flags & IPATH_LINKACTIVE)
-			signal_ib_event(dd, IB_EVENT_PORT_ERR);
-		dd->ipath_flags |= IPATH_LINKARMED;
-		dd->ipath_flags &=
-			~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
-			  IPATH_LINKACTIVE | IPATH_NOCABLE);
-		*dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
-					| IPATH_STATUS_IB_READY);
-		dd->ipath_f_setextled(dd, lstate, ltstate);
-	} else {
-		if (!noprint)
-			ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
-				  dd->ipath_unit,
-				  ipath_ibcstatus_str[ltstate], ltstate);
+		if (lastlstate != INFINIPATH_IBCS_L_STATE_DOWN)
+			ipath_cdbg(VERBOSE, "Unit %u link state down "
+				   "(state 0x%x), from %s\n",
+				   dd->ipath_unit, lstate,
+				   ib_linkstate(dd, dd->ipath_lastibcstat));
+		else
+			ipath_cdbg(LINKVERB, "Unit %u link state changed "
+				   "to %s (0x%x) from down (%x)\n",
+				   dd->ipath_unit,
+				   ipath_ibcstatus_str[ltstate],
+				   ibstate, lastlstate);
 	}
+
 skip_ibchange:
-	dd->ipath_lastibcstat = val;
+	dd->ipath_lastibcstat = ibcs;
 }
 
 static void handle_supp_msgs(struct ipath_devdata *dd,
@@ -743,16 +731,13 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
 		dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
 				     | IPATH_LINKARMED | IPATH_LINKACTIVE);
 		*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
-		if (!noprint) {
-			u64 st = ipath_read_kreg64(
-				dd, dd->ipath_kregs->kr_ibcstatus);
 
-			ipath_dbg("Lost link, link now down (%s)\n",
-				  ipath_ibcstatus_str[st & 0xf]);
-		}
+		ipath_dbg("Lost link, link now down (%s)\n",
+			ipath_ibcstatus_str[ipath_read_kreg64(dd,
+			dd->ipath_kregs->kr_ibcstatus) & 0xf]);
 	}
 	if (errs & INFINIPATH_E_IBSTATUSCHANGED)
-		handle_e_ibstatuschanged(dd, errs, noprint);
+		handle_e_ibstatuschanged(dd, errs);
 
 	if (errs & INFINIPATH_E_RESET) {
 		if (!noprint)