drm/bridge: add Silicon Image SiI8620 driver

SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com

4 files changed, 3090 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 10e12e74fc9f..bd6acc829f97 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -57,6 +57,13 @@ config DRM_PARADE_PS8622
 	---help---
 	  Parade eDP-LVDS bridge chip driver.
 
+config DRM_SIL_SII8620
+	tristate "Silicon Image SII8620 HDMI/MHL bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
+
 config DRM_SII902X
 	tristate "Silicon Image sii902x RGB/HDMI bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index cdf3a3cf765d..97ed1a5fea9a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
new file mode 100644
index 000000000000..1345e7cc7bf0
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -0,0 +1,1565 @@
+/*
+ * Silicon Image SiI8620 HDMI/MHL bridge driver
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <drm/bridge/mhl.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include "sil-sii8620.h"
+
+#define VAL_RX_HDMI_CTRL2_DEFVAL	VAL_RX_HDMI_CTRL2_IDLE_CNT(3)
+
+enum sii8620_mode {
+	CM_DISCONNECTED,
+	CM_DISCOVERY,
+	CM_MHL1,
+	CM_MHL3,
+	CM_ECBUS_S
+};
+
+enum sii8620_sink_type {
+	SINK_NONE,
+	SINK_HDMI,
+	SINK_DVI
+};
+
+enum sii8620_mt_state {
+	MT_STATE_READY,
+	MT_STATE_BUSY,
+	MT_STATE_DONE
+};
+
+struct sii8620 {
+	struct drm_bridge bridge;
+	struct device *dev;
+	struct clk *clk_xtal;
+	struct gpio_desc *gpio_reset;
+	struct gpio_desc *gpio_int;
+	struct regulator_bulk_data supplies[2];
+	struct mutex lock; /* context lock, protects fields below */
+	int error;
+	enum sii8620_mode mode;
+	enum sii8620_sink_type sink_type;
+	u8 cbus_status;
+	u8 stat[MHL_DST_SIZE];
+	u8 xstat[MHL_XDS_SIZE];
+	u8 devcap[MHL_DCAP_SIZE];
+	u8 xdevcap[MHL_XDC_SIZE];
+	u8 avif[19];
+	struct edid *edid;
+	unsigned int gen2_write_burst:1;
+	enum sii8620_mt_state mt_state;
+	struct list_head mt_queue;
+};
+
+struct sii8620_mt_msg;
+
+typedef void (*sii8620_mt_msg_cb)(struct sii8620 *ctx,
+				  struct sii8620_mt_msg *msg);
+
+struct sii8620_mt_msg {
+	struct list_head node;
+	u8 reg[4];
+	u8 ret;
+	sii8620_mt_msg_cb send;
+	sii8620_mt_msg_cb recv;
+};
+
+static const u8 sii8620_i2c_page[] = {
+	0x39, /* Main System */
+	0x3d, /* TDM and HSIC */
+	0x49, /* TMDS Receiver, MHL EDID */
+	0x4d, /* eMSC, HDCP, HSIC */
+	0x5d, /* MHL Spec */
+	0x64, /* MHL CBUS */
+	0x59, /* Hardware TPI (Transmitter Programming Interface) */
+	0x61, /* eCBUS-S, eCBUS-D */
+};
+
+static void sii8620_fetch_edid(struct sii8620 *ctx);
+static void sii8620_set_upstream_edid(struct sii8620 *ctx);
+static void sii8620_enable_hpd(struct sii8620 *ctx);
+static void sii8620_mhl_disconnected(struct sii8620 *ctx);
+
+static int sii8620_clear_error(struct sii8620 *ctx)
+{
+	int ret = ctx->error;
+
+	ctx->error = 0;
+	return ret;
+}
+
+static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
+{
+	struct device *dev = ctx->dev;
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 data = addr;
+	struct i2c_msg msg[] = {
+		{
+			.addr = sii8620_i2c_page[addr >> 8],
+			.flags = client->flags,
+			.len = 1,
+			.buf = &data
+		},
+		{
+			.addr = sii8620_i2c_page[addr >> 8],
+			.flags = client->flags | I2C_M_RD,
+			.len = len,
+			.buf = buf
+		},
+	};
+	int ret;
+
+	if (ctx->error)
+		return;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	dev_dbg(dev, "read at %04x: %*ph, %d\n", addr, len, buf, ret);
+
+	if (ret != 2) {
+		dev_err(dev, "Read at %#06x of %d bytes failed with code %d.\n",
+			addr, len, ret);
+		ctx->error = ret < 0 ? ret : -EIO;
+	}
+}
+
+static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
+{
+	u8 ret;
+
+	sii8620_read_buf(ctx, addr, &ret, 1);
+	return ret;
+}
+
+static void sii8620_write_buf(struct sii8620 *ctx, u16 addr, const u8 *buf,
+			      int len)
+{
+	struct device *dev = ctx->dev;
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 data[2];
+	struct i2c_msg msg = {
+		.addr = sii8620_i2c_page[addr >> 8],
+		.flags = client->flags,
+		.len = len + 1,
+	};
+	int ret;
+
+	if (ctx->error)
+		return;
+
+	if (len > 1) {
+		msg.buf = kmalloc(len + 1, GFP_KERNEL);
+		if (!msg.buf) {
+			ctx->error = -ENOMEM;
+			return;
+		}
+		memcpy(msg.buf + 1, buf, len);
+	} else {
+		msg.buf = data;
+		msg.buf[1] = *buf;
+	}
+
+	msg.buf[0] = addr;
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	dev_dbg(dev, "write at %04x: %*ph, %d\n", addr, len, buf, ret);
+
+	if (ret != 1) {
+		dev_err(dev, "Write at %#06x of %*ph failed with code %d.\n",
+			addr, len, buf, ret);
+		ctx->error = ret ?: -EIO;
+	}
+
+	if (len > 1)
+		kfree(msg.buf);
+}
+
+#define sii8620_write(ctx, addr, arr...) \
+({\
+	u8 d[] = { arr }; \
+	sii8620_write_buf(ctx, addr, d, ARRAY_SIZE(d)); \
+})
+
+static void __sii8620_write_seq(struct sii8620 *ctx, const u16 *seq, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i += 2)
+		sii8620_write(ctx, seq[i], seq[i + 1]);
+}
+
+#define sii8620_write_seq(ctx, seq...) \
+({\
+	const u16 d[] = { seq }; \
+	__sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
+})
+
+#define sii8620_write_seq_static(ctx, seq...) \
+({\
+	static const u16 d[] = { seq }; \
+	__sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
+})
+
+static void sii8620_setbits(struct sii8620 *ctx, u16 addr, u8 mask, u8 val)
+{
+	val = (val & mask) | (sii8620_readb(ctx, addr) & ~mask);
+	sii8620_write(ctx, addr, val);
+}
+
+static void sii8620_mt_cleanup(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg, *n;
+
+	list_for_each_entry_safe(msg, n, &ctx->mt_queue, node) {
+		list_del(&msg->node);
+		kfree(msg);
+	}
+	ctx->mt_state = MT_STATE_READY;
+}
+
+static void sii8620_mt_work(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg;
+
+	if (ctx->error)
+		return;
+	if (ctx->mt_state == MT_STATE_BUSY || list_empty(&ctx->mt_queue))
+		return;
+
+	if (ctx->mt_state == MT_STATE_DONE) {
+		ctx->mt_state = MT_STATE_READY;
+		msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg,
+				       node);
+		if (msg->recv)
+			msg->recv(ctx, msg);
+		list_del(&msg->node);
+		kfree(msg);
+	}
+
+	if (ctx->mt_state != MT_STATE_READY || list_empty(&ctx->mt_queue))
+		return;
+
+	ctx->mt_state = MT_STATE_BUSY;
+	msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+	if (msg->send)
+		msg->send(ctx, msg);
+}
+
+static void sii8620_mt_msc_cmd_send(struct sii8620 *ctx,
+				    struct sii8620_mt_msg *msg)
+{
+	switch (msg->reg[0]) {
+	case MHL_WRITE_STAT:
+	case MHL_SET_INT:
+		sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg + 1, 2);
+		sii8620_write(ctx, REG_MSC_COMMAND_START,
+			      BIT_MSC_COMMAND_START_WRITE_STAT);
+		break;
+	case MHL_MSC_MSG:
+		sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg, 3);
+		sii8620_write(ctx, REG_MSC_COMMAND_START,
+			      BIT_MSC_COMMAND_START_MSC_MSG);
+		break;
+	default:
+		dev_err(ctx->dev, "%s: command %#x not supported\n", __func__,
+			msg->reg[0]);
+	}
+}
+
+static struct sii8620_mt_msg *sii8620_mt_msg_new(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+
+	if (!msg)
+		ctx->error = -ENOMEM;
+	else
+		list_add_tail(&msg->node, &ctx->mt_queue);
+
+	return msg;
+}
+
+static void sii8620_mt_msc_cmd(struct sii8620 *ctx, u8 cmd, u8 arg1, u8 arg2)
+{
+	struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+	if (!msg)
+		return;
+
+	msg->reg[0] = cmd;
+	msg->reg[1] = arg1;
+	msg->reg[2] = arg2;
+	msg->send = sii8620_mt_msc_cmd_send;
+}
+
+static void sii8620_mt_write_stat(struct sii8620 *ctx, u8 reg, u8 val)
+{
+	sii8620_mt_msc_cmd(ctx, MHL_WRITE_STAT, reg, val);
+}
+
+static inline void sii8620_mt_set_int(struct sii8620 *ctx, u8 irq, u8 mask)
+{
+	sii8620_mt_msc_cmd(ctx, MHL_SET_INT, irq, mask);
+}
+
+static void sii8620_mt_msc_msg(struct sii8620 *ctx, u8 cmd, u8 data)
+{
+	sii8620_mt_msc_cmd(ctx, MHL_MSC_MSG, cmd, data);
+}
+
+static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
+{
+	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
+}
+
+static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
+					struct sii8620_mt_msg *msg)
+{
+	u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
+			| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+			| BIT_EDID_CTRL_EDID_MODE_EN;
+
+	if (msg->reg[0] == MHL_READ_XDEVCAP)
+		ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
+
+	sii8620_write_seq(ctx,
+		REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE,
+		REG_EDID_CTRL, ctrl,
+		REG_TPI_CBUS_START, BIT_TPI_CBUS_START_GET_DEVCAP_START
+	);
+}
+
+/* copy src to dst and set changed bits in src */
+static void sii8620_update_array(u8 *dst, u8 *src, int count)
+{
+	while (--count >= 0) {
+		*src ^= *dst;
+		*dst++ ^= *src++;
+	}
+}
+
+static void sii8620_mr_devcap(struct sii8620 *ctx)
+{
+	static const char * const sink_str[] = {
+		[SINK_NONE] = "NONE",
+		[SINK_HDMI] = "HDMI",
+		[SINK_DVI] = "DVI"
+	};
+
+	u8 dcap[MHL_DCAP_SIZE];
+	char sink_name[20];
+	struct device *dev = ctx->dev;
+
+	sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, dcap, MHL_DCAP_SIZE);
+	if (ctx->error < 0)
+		return;
+
+	dev_info(dev, "dcap: %*ph\n", MHL_DCAP_SIZE, dcap);
+	dev_info(dev, "detected dongle MHL %d.%d, ChipID %02x%02x:%02x%02x\n",
+		 dcap[MHL_DCAP_MHL_VERSION] / 16,
+		 dcap[MHL_DCAP_MHL_VERSION] % 16, dcap[MHL_DCAP_ADOPTER_ID_H],
+		 dcap[MHL_DCAP_ADOPTER_ID_L], dcap[MHL_DCAP_DEVICE_ID_H],
+		 dcap[MHL_DCAP_DEVICE_ID_L]);
+	sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE);
+
+	if (!(dcap[MHL_DCAP_CAT] & MHL_DCAP_CAT_SINK))
+		return;
+
+	sii8620_fetch_edid(ctx);
+	if (!ctx->edid) {
+		dev_err(ctx->dev, "Cannot fetch EDID\n");
+		sii8620_mhl_disconnected(ctx);
+		return;
+	}
+
+	if (drm_detect_hdmi_monitor(ctx->edid))
+		ctx->sink_type = SINK_HDMI;
+	else
+		ctx->sink_type = SINK_DVI;
+
+	drm_edid_get_monitor_name(ctx->edid, sink_name, ARRAY_SIZE(sink_name));
+
+	dev_info(dev, "detected sink(type: %s): %s\n",
+		 sink_str[ctx->sink_type], sink_name);
+	sii8620_set_upstream_edid(ctx);
+	sii8620_enable_hpd(ctx);
+}
+
+static void sii8620_mr_xdevcap(struct sii8620 *ctx)
+{
+	sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, ctx->xdevcap,
+			 MHL_XDC_SIZE);
+
+	sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE),
+			      MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT);
+	sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP);
+}
+
+static void sii8620_mt_read_devcap_recv(struct sii8620 *ctx,
+					struct sii8620_mt_msg *msg)
+{
+	u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
+		| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+		| BIT_EDID_CTRL_EDID_MODE_EN;
+
+	if (msg->reg[0] == MHL_READ_XDEVCAP)
+		ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
+
+	sii8620_write_seq(ctx,
+		REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE | BIT_INTR9_EDID_DONE
+			| BIT_INTR9_EDID_ERROR,
+		REG_EDID_CTRL, ctrl,
+		REG_EDID_FIFO_ADDR, 0
+	);
+
+	if (msg->reg[0] == MHL_READ_XDEVCAP)
+		sii8620_mr_xdevcap(ctx);
+	else
+		sii8620_mr_devcap(ctx);
+}
+
+static void sii8620_mt_read_devcap(struct sii8620 *ctx, bool xdevcap)
+{
+	struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+	if (!msg)
+		return;
+
+	msg->reg[0] = xdevcap ? MHL_READ_XDEVCAP : MHL_READ_DEVCAP;
+	msg->send = sii8620_mt_read_devcap_send;
+	msg->recv = sii8620_mt_read_devcap_recv;
+}
+
+static void sii8620_fetch_edid(struct sii8620 *ctx)
+{
+	u8 lm_ddc, ddc_cmd, int3, cbus;
+	int fetched, i;
+	int edid_len = EDID_LENGTH;
+	u8 *edid;
+
+	sii8620_readb(ctx, REG_CBUS_STATUS);
+	lm_ddc = sii8620_readb(ctx, REG_LM_DDC);
+	ddc_cmd = sii8620_readb(ctx, REG_DDC_CMD);
+
+	sii8620_write_seq(ctx,
+		REG_INTR9_MASK, 0,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
+		REG_HDCP2X_POLL_CS, 0x71,
+		REG_HDCP2X_CTRL_0, BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX,
+		REG_LM_DDC, lm_ddc | BIT_LM_DDC_SW_TPI_EN_DISABLED,
+	);
+
+	for (i = 0; i < 256; ++i) {
+		u8 ddc_stat = sii8620_readb(ctx, REG_DDC_STATUS);
+
+		if (!(ddc_stat & BIT_DDC_STATUS_DDC_I2C_IN_PROG))
+			break;
+		sii8620_write(ctx, REG_DDC_STATUS,
+			      BIT_DDC_STATUS_DDC_FIFO_EMPTY);
+	}
+
+	sii8620_write(ctx, REG_DDC_ADDR, 0x50 << 1);
+
+	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	if (!edid) {
+		ctx->error = -ENOMEM;
+		return;
+	}
+
+#define FETCH_SIZE 16
+	for (fetched = 0; fetched < edid_len; fetched += FETCH_SIZE) {
+		sii8620_readb(ctx, REG_DDC_STATUS);
+		sii8620_write_seq(ctx,
+			REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_ABORT,
+			REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO,
+			REG_DDC_STATUS, BIT_DDC_STATUS_DDC_FIFO_EMPTY
+		);
+		sii8620_write_seq(ctx,
+			REG_DDC_SEGM, fetched >> 8,
+			REG_DDC_OFFSET, fetched & 0xff,
+			REG_DDC_DIN_CNT1, FETCH_SIZE,
+			REG_DDC_DIN_CNT2, 0,
+			REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK
+		);
+
+		do {
+			int3 = sii8620_readb(ctx, REG_INTR3);
+			cbus = sii8620_readb(ctx, REG_CBUS_STATUS);
+
+			if (int3 & BIT_DDC_CMD_DONE)
+				break;
+
+			if (!(cbus & BIT_CBUS_STATUS_CBUS_CONNECTED)) {
+				kfree(edid);
+				edid = NULL;
+				goto end;
+			}
+		} while (1);
+
+		sii8620_readb(ctx, REG_DDC_STATUS);
+		while (sii8620_readb(ctx, REG_DDC_DOUT_CNT) < FETCH_SIZE)
+			usleep_range(10, 20);
+
+		sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE);
+		if (fetched + FETCH_SIZE == EDID_LENGTH) {
+			u8 ext = ((struct edid *)edid)->extensions;
+
+			if (ext) {
+				u8 *new_edid;
+
+				edid_len += ext * EDID_LENGTH;
+				new_edid = krealloc(edid, edid_len, GFP_KERNEL);
+				if (!new_edid) {
+					kfree(edid);
+					ctx->error = -ENOMEM;
+					return;
+				}
+				edid = new_edid;
+			}
+		}
+
+		if (fetched + FETCH_SIZE == edid_len)
+			sii8620_write(ctx, REG_INTR3, int3);
+	}
+
+	sii8620_write(ctx, REG_LM_DDC, lm_ddc);
+
+end:
+	kfree(ctx->edid);
+	ctx->edid = (struct edid *)edid;
+}
+
+static void sii8620_set_upstream_edid(struct sii8620 *ctx)
+{
+	sii8620_setbits(ctx, REG_DPD, BIT_DPD_PDNRX12 | BIT_DPD_PDIDCK_N
+			| BIT_DPD_PD_MHL_CLK_N, 0xff);
+
+	sii8620_write_seq_static(ctx,
+		REG_RX_HDMI_CTRL3, 0x00,
+		REG_PKT_FILTER_0, 0xFF,
+		REG_PKT_FILTER_1, 0xFF,
+		REG_ALICE0_BW_I2C, 0x06
+	);
+
+	sii8620_setbits(ctx, REG_RX_HDMI_CLR_BUFFER,
+			BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN, 0xff);
+
+	sii8620_write_seq_static(ctx,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+			| BIT_EDID_CTRL_EDID_MODE_EN,
+		REG_EDID_FIFO_ADDR, 0,
+	);
+
+	sii8620_write_buf(ctx, REG_EDID_FIFO_WR_DATA, (u8 *)ctx->edid,
+			  (ctx->edid->extensions + 1) * EDID_LENGTH);
+
+	sii8620_write_seq_static(ctx,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID
+			| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+			| BIT_EDID_CTRL_EDID_MODE_EN,
+		REG_INTR5_MASK, BIT_INTR_SCDT_CHANGE,
+		REG_INTR9_MASK, 0
+	);
+}
+
+static void sii8620_xtal_set_rate(struct sii8620 *ctx)
+{
+	static const struct {
+		unsigned int rate;
+		u8 div;
+		u8 tp1;
+	} rates[] = {
+		{ 19200, 0x04, 0x53 },
+		{ 20000, 0x04, 0x62 },
+		{ 24000, 0x05, 0x75 },
+		{ 30000, 0x06, 0x92 },
+		{ 38400, 0x0c, 0xbc },
+	};
+	unsigned long rate = clk_get_rate(ctx->clk_xtal) / 1000;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(rates) - 1; ++i)
+		if (rate <= rates[i].rate)
+			break;
+
+	if (rate != rates[i].rate)
+		dev_err(ctx->dev, "xtal clock rate(%lukHz) not supported, setting MHL for %ukHz.\n",
+			rate, rates[i].rate);
+
+	sii8620_write(ctx, REG_DIV_CTL_MAIN, rates[i].div);
+	sii8620_write(ctx, REG_HDCP2X_TP1, rates[i].tp1);
+}
+
+static int sii8620_hw_on(struct sii8620 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		return ret;
+	usleep_range(10000, 20000);
+	return clk_prepare_enable(ctx->clk_xtal);
+}
+
+static int sii8620_hw_off(struct sii8620 *ctx)
+{
+	clk_disable_unprepare(ctx->clk_xtal);
+	gpiod_set_value(ctx->gpio_reset, 1);
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii8620_hw_reset(struct sii8620 *ctx)
+{
+	usleep_range(10000, 20000);
+	gpiod_set_value(ctx->gpio_reset, 0);
+	usleep_range(5000, 20000);
+	gpiod_set_value(ctx->gpio_reset, 1);
+	usleep_range(10000, 20000);
+	gpiod_set_value(ctx->gpio_reset, 0);
+	msleep(300);
+}
+
+static void sii8620_cbus_reset(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST
+			| BIT_PWD_SRST_CBUS_RST_SW_EN,
+		REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN
+	);
+}
+
+static void sii8620_set_auto_zone(struct sii8620 *ctx)
+{
+	if (ctx->mode != CM_MHL1) {
+		sii8620_write_seq_static(ctx,
+			REG_TX_ZONE_CTL1, 0x0,
+			REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+				| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+				| BIT_MHL_PLL_CTL0_ZONE_MASK_OE
+		);
+	} else {
+		sii8620_write_seq_static(ctx,
+			REG_TX_ZONE_CTL1, VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE,
+			REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+				| BIT_MHL_PLL_CTL0_ZONE_MASK_OE
+		);
+	}
+}
+
+static void sii8620_stop_video(struct sii8620 *ctx)
+{
+	u8 uninitialized_var(val);
+
+	sii8620_write_seq_static(ctx,
+		REG_TPI_INTR_EN, 0,
+		REG_HDCP2X_INTR0_MASK, 0,
+		REG_TPI_COPP_DATA2, 0,
+		REG_TPI_INTR_ST0, ~0,
+	);
+
+	switch (ctx->sink_type) {
+	case SINK_DVI:
+		val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
+			| BIT_TPI_SC_TPI_AV_MUTE;
+		break;
+	case SINK_HDMI:
+		val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
+			| BIT_TPI_SC_TPI_AV_MUTE
+			| BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI;
+		break;
+	default:
+		return;
+	}
+
+	sii8620_write(ctx, REG_TPI_SC, val);
+}
+
+static void sii8620_start_hdmi(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL
+			| BIT_RX_HDMI_CTRL2_USE_AV_MUTE,
+		REG_VID_OVRRD, BIT_VID_OVRRD_PP_AUTO_DISABLE
+			| BIT_VID_OVRRD_M1080P_OVRRD,
+		REG_VID_MODE, 0,
+		REG_MHL_TOP_CTL, 0x1,
+		REG_MHLTX_CTL6, 0xa0,
+		REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL),
+		REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL),
+	);
+
+	sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+			      MHL_DST_LM_CLK_MODE_NORMAL |
+			      MHL_DST_LM_PATH_ENABLED);
+
+	sii8620_set_auto_zone(ctx);
+
+	sii8620_write(ctx, REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI);
+
+	sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, ctx->avif,
+			  ARRAY_SIZE(ctx->avif));
+
+	sii8620_write(ctx, REG_PKT_FILTER_0, 0xa1, 0x2);
+}
+
+static void sii8620_start_video(struct sii8620 *ctx)
+{
+	if (ctx->mode < CM_MHL3)
+		sii8620_stop_video(ctx);
+
+	switch (ctx->sink_type) {
+	case SINK_HDMI:
+		sii8620_start_hdmi(ctx);
+		break;
+	case SINK_DVI:
+	default:
+		break;
+	}
+}
+
+static void sii8620_disable_hpd(struct sii8620 *ctx)
+{
+	sii8620_setbits(ctx, REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID, 0);
+	sii8620_write_seq_static(ctx,
+		REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN,
+		REG_INTR8_MASK, 0
+	);
+}
+
+static void sii8620_enable_hpd(struct sii8620 *ctx)
+{
+	sii8620_setbits(ctx, REG_TMDS_CSTAT_P3,
+			BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
+			| BIT_TMDS_CSTAT_P3_CLR_AVI, ~0);
+	sii8620_write_seq_static(ctx,
+		REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN
+			| BIT_HPD_CTRL_HPD_HIGH,
+	);
+}
+
+static void sii8620_enable_gen2_write_burst(struct sii8620 *ctx)
+{
+	if (ctx->gen2_write_burst)
+		return;
+
+	sii8620_write_seq_static(ctx,
+		REG_MDT_RCV_TIMEOUT, 100,
+		REG_MDT_RCV_CTRL, BIT_MDT_RCV_CTRL_MDT_RCV_EN
+	);
+	ctx->gen2_write_burst = 1;
+}
+
+static void sii8620_disable_gen2_write_burst(struct sii8620 *ctx)
+{
+	if (!ctx->gen2_write_burst)
+		return;
+
+	sii8620_write_seq_static(ctx,
+		REG_MDT_XMIT_CTRL, 0,
+		REG_MDT_RCV_CTRL, 0
+	);
+	ctx->gen2_write_burst = 0;
+}
+
+static void sii8620_start_gen2_write_burst(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_MDT_INT_1_MASK, BIT_MDT_RCV_TIMEOUT
+			| BIT_MDT_RCV_SM_ABORT_PKT_RCVD | BIT_MDT_RCV_SM_ERROR
+			| BIT_MDT_XMIT_TIMEOUT | BIT_MDT_XMIT_SM_ABORT_PKT_RCVD
+			| BIT_MDT_XMIT_SM_ERROR,
+		REG_MDT_INT_0_MASK, BIT_MDT_XFIFO_EMPTY
+			| BIT_MDT_IDLE_AFTER_HAWB_DISABLE
+			| BIT_MDT_RFIFO_DATA_RDY
+	);
+	sii8620_enable_gen2_write_burst(ctx);
+}
+
+static void sii8620_mhl_discover(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+			| BIT_DISC_CTRL9_DISC_PULSE_PROCEED,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_5K, VAL_PUP_20K),
+		REG_CBUS_DISC_INTR0_MASK, BIT_MHL3_EST_INT
+			| BIT_MHL_EST_INT
+			| BIT_NOT_MHL_EST_INT
+			| BIT_CBUS_MHL3_DISCON_INT
+			| BIT_CBUS_MHL12_DISCON_INT
+			| BIT_RGND_READY_INT,
+		REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+			| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+			| BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
+		REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
+			| BIT_MHL_DP_CTL0_TX_OE_OVR,
+		REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+		REG_MHL_DP_CTL1, 0xA2,
+		REG_MHL_DP_CTL2, 0x03,
+		REG_MHL_DP_CTL3, 0x35,
+		REG_MHL_DP_CTL5, 0x02,
+		REG_MHL_DP_CTL6, 0x02,
+		REG_MHL_DP_CTL7, 0x03,
+		REG_COC_CTLC, 0xFF,
+		REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
+			| BIT_DPD_OSC_EN | BIT_DPD_PWRON_HSIC,
+		REG_COC_INTR_MASK, BIT_COC_PLL_LOCK_STATUS_CHANGE
+			| BIT_COC_CALIBRATION_DONE,
+		REG_CBUS_INT_1_MASK, BIT_CBUS_MSC_ABORT_RCVD
+			| BIT_CBUS_CMD_ABORT,
+		REG_CBUS_INT_0_MASK, BIT_CBUS_MSC_MT_DONE
+			| BIT_CBUS_HPD_CHG
+			| BIT_CBUS_MSC_MR_WRITE_STAT
+			| BIT_CBUS_MSC_MR_MSC_MSG
+			| BIT_CBUS_MSC_MR_WRITE_BURST
+			| BIT_CBUS_MSC_MR_SET_INT
+			| BIT_CBUS_MSC_MT_DONE_NACK
+	);
+}
+
+static void sii8620_peer_specific_init(struct sii8620 *ctx)
+{
+	if (ctx->mode == CM_MHL3)
+		sii8620_write_seq_static(ctx,
+			REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD,
+			REG_EMSCINTRMASK1,
+				BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR
+		);
+	else
+		sii8620_write_seq_static(ctx,
+			REG_HDCP2X_INTR0_MASK, 0x00,
+			REG_EMSCINTRMASK1, 0x00,
+			REG_HDCP2X_INTR0, 0xFF,
+			REG_INTR1, 0xFF,
+			REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD
+				| BIT_SYS_CTRL1_TX_CTRL_HDMI
+		);
+}
+
+#define SII8620_MHL_VERSION			0x32
+#define SII8620_SCRATCHPAD_SIZE			16
+#define SII8620_INT_STAT_SIZE			0x33
+
+static void sii8620_set_dev_cap(struct sii8620 *ctx)
+{
+	static const u8 devcap[MHL_DCAP_SIZE] = {
+		[MHL_DCAP_MHL_VERSION] = SII8620_MHL_VERSION,
+		[MHL_DCAP_CAT] = MHL_DCAP_CAT_SOURCE | MHL_DCAP_CAT_POWER,
+		[MHL_DCAP_ADOPTER_ID_H] = 0x01,
+		[MHL_DCAP_ADOPTER_ID_L] = 0x41,
+		[MHL_DCAP_VID_LINK_MODE] = MHL_DCAP_VID_LINK_RGB444
+			| MHL_DCAP_VID_LINK_PPIXEL
+			| MHL_DCAP_VID_LINK_16BPP,
+		[MHL_DCAP_AUD_LINK_MODE] = MHL_DCAP_AUD_LINK_2CH,
+		[MHL_DCAP_VIDEO_TYPE] = MHL_DCAP_VT_GRAPHICS,
+		[MHL_DCAP_LOG_DEV_MAP] = MHL_DCAP_LD_GUI,
+		[MHL_DCAP_BANDWIDTH] = 0x0f,
+		[MHL_DCAP_FEATURE_FLAG] = MHL_DCAP_FEATURE_RCP_SUPPORT
+			| MHL_DCAP_FEATURE_RAP_SUPPORT
+			| MHL_DCAP_FEATURE_SP_SUPPORT,
+		[MHL_DCAP_SCRATCHPAD_SIZE] = SII8620_SCRATCHPAD_SIZE,
+		[MHL_DCAP_INT_STAT_SIZE] = SII8620_INT_STAT_SIZE,
+	};
+	static const u8 xdcap[MHL_XDC_SIZE] = {
+		[MHL_XDC_ECBUS_SPEEDS] = MHL_XDC_ECBUS_S_075
+			| MHL_XDC_ECBUS_S_8BIT,
+		[MHL_XDC_TMDS_SPEEDS] = MHL_XDC_TMDS_150
+			| MHL_XDC_TMDS_300 | MHL_XDC_TMDS_600,
+		[MHL_XDC_ECBUS_ROLES] = MHL_XDC_DEV_HOST,
+		[MHL_XDC_LOG_DEV_MAPX] = MHL_XDC_LD_PHONE,
+	};
+
+	sii8620_write_buf(ctx, REG_MHL_DEVCAP_0, devcap, ARRAY_SIZE(devcap));
+	sii8620_write_buf(ctx, REG_MHL_EXTDEVCAP_0, xdcap, ARRAY_SIZE(xdcap));
+}
+
+static void sii8620_mhl_init(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+		REG_CBUS_MSC_COMPAT_CTRL,
+			BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN,
+	);
+
+	sii8620_peer_specific_init(ctx);
+
+	sii8620_disable_hpd(ctx);
+
+	sii8620_write_seq_static(ctx,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
+		REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+			| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+		REG_TMDS0_CCTRL1, 0x90,
+		REG_TMDS_CLK_EN, 0x01,
+		REG_TMDS_CH_EN, 0x11,
+		REG_BGR_BIAS, 0x87,
+		REG_ALICE0_ZONE_CTRL, 0xE8,
+		REG_ALICE0_MODE_CTRL, 0x04,
+	);
+	sii8620_setbits(ctx, REG_LM_DDC, BIT_LM_DDC_SW_TPI_EN_DISABLED, 0);
+	sii8620_write_seq_static(ctx,
+		REG_TPI_HW_OPT3, 0x76,
+		REG_TMDS_CCTRL, BIT_TMDS_CCTRL_TMDS_OE,
+		REG_TPI_DTD_B2, 79,
+	);
+	sii8620_set_dev_cap(ctx);
+	sii8620_write_seq_static(ctx,
+		REG_MDT_XMIT_TIMEOUT, 100,
+		REG_MDT_XMIT_CTRL, 0x03,
+		REG_MDT_XFIFO_STAT, 0x00,
+		REG_MDT_RCV_TIMEOUT, 100,
+		REG_CBUS_LINK_CTRL_8, 0x1D,
+	);
+
+	sii8620_start_gen2_write_burst(ctx);
+	sii8620_write_seq_static(ctx,
+		REG_BIST_CTRL, 0x00,
+		REG_COC_CTL1, 0x10,
+		REG_COC_CTL2, 0x18,
+		REG_COC_CTLF, 0x07,
+		REG_COC_CTL11, 0xF8,
+		REG_COC_CTL17, 0x61,
+		REG_COC_CTL18, 0x46,
+		REG_COC_CTL19, 0x15,
+		REG_COC_CTL1A, 0x01,
+		REG_MHL_COC_CTL3, BIT_MHL_COC_CTL3_COC_AECHO_EN,
+		REG_MHL_COC_CTL4, 0x2D,
+		REG_MHL_COC_CTL5, 0xF9,
+		REG_MSC_HEARTBEAT_CTRL, 0x27,
+	);
+	sii8620_disable_gen2_write_burst(ctx);
+
+	/* currently MHL3 is not supported, so we force version to 0 */
+	sii8620_mt_write_stat(ctx, MHL_DST_REG(VERSION), 0);
+	sii8620_mt_write_stat(ctx, MHL_DST_REG(CONNECTED_RDY),
+			      MHL_DST_CONN_DCAP_RDY | MHL_DST_CONN_XDEVCAPP_SUPP
+			      | MHL_DST_CONN_POW_STAT);
+	sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG);
+}
+
+static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
+{
+	if (ctx->mode == mode)
+		return;
+
+	ctx->mode = mode;
+
+	switch (mode) {
+	case CM_MHL1:
+		sii8620_write_seq_static(ctx,
+			REG_CBUS_MSC_COMPAT_CTRL, 0x02,
+			REG_M3_CTRL, VAL_M3_CTRL_MHL1_2_VALUE,
+			REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
+				| BIT_DPD_OSC_EN,
+			REG_COC_INTR_MASK, 0
+		);
+		break;
+	case CM_MHL3:
+		sii8620_write_seq_static(ctx,
+			REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+			REG_COC_CTL0, 0x40,
+			REG_MHL_COC_CTL1, 0x07
+		);
+		break;
+	case CM_DISCONNECTED:
+		break;
+	default:
+		dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode);
+		break;
+	};
+
+	sii8620_set_auto_zone(ctx);
+
+	if (mode != CM_MHL1)
+		return;
+
+	sii8620_write_seq_static(ctx,
+		REG_MHL_DP_CTL0, 0xBC,
+		REG_MHL_DP_CTL1, 0xBB,
+		REG_MHL_DP_CTL3, 0x48,
+		REG_MHL_DP_CTL5, 0x39,
+		REG_MHL_DP_CTL2, 0x2A,
+		REG_MHL_DP_CTL6, 0x2A,
+		REG_MHL_DP_CTL7, 0x08
+	);
+}
+
+static void sii8620_disconnect(struct sii8620 *ctx)
+{
+	sii8620_disable_gen2_write_burst(ctx);
+	sii8620_stop_video(ctx);
+	msleep(50);
+	sii8620_cbus_reset(ctx);
+	sii8620_set_mode(ctx, CM_DISCONNECTED);
+	sii8620_write_seq_static(ctx,
+		REG_COC_CTL0, 0x40,
+		REG_CBUS3_CNVT, 0x84,
+		REG_COC_CTL14, 0x00,
+		REG_COC_CTL0, 0x40,
+		REG_HRXCTRL3, 0x07,
+		REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+			| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+			| BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
+		REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
+			| BIT_MHL_DP_CTL0_TX_OE_OVR,
+		REG_MHL_DP_CTL1, 0xBB,
+		REG_MHL_DP_CTL3, 0x48,
+		REG_MHL_DP_CTL5, 0x3F,
+		REG_MHL_DP_CTL2, 0x2F,
+		REG_MHL_DP_CTL6, 0x2A,
+		REG_MHL_DP_CTL7, 0x03
+	);
+	sii8620_disable_hpd(ctx);
+	sii8620_write_seq_static(ctx,
+		REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+		REG_MHL_COC_CTL1, 0x07,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+		REG_DISC_CTRL8, 0x00,
+		REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+			| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+		REG_INT_CTRL, 0x00,
+		REG_MSC_HEARTBEAT_CTRL, 0x27,
+		REG_DISC_CTRL1, 0x25,
+		REG_CBUS_DISC_INTR0, (u8)~BIT_RGND_READY_INT,
+		REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT,
+		REG_MDT_INT_1, 0xff,
+		REG_MDT_INT_1_MASK, 0x00,
+		REG_MDT_INT_0, 0xff,
+		REG_MDT_INT_0_MASK, 0x00,
+		REG_COC_INTR, 0xff,
+		REG_COC_INTR_MASK, 0x00,
+		REG_TRXINTH, 0xff,
+		REG_TRXINTMH, 0x00,
+		REG_CBUS_INT_0, 0xff,
+		REG_CBUS_INT_0_MASK, 0x00,
+		REG_CBUS_INT_1, 0xff,
+		REG_CBUS_INT_1_MASK, 0x00,
+		REG_EMSCINTR, 0xff,
+		REG_EMSCINTRMASK, 0x00,
+		REG_EMSCINTR1, 0xff,
+		REG_EMSCINTRMASK1, 0x00,
+		REG_INTR8, 0xff,
+		REG_INTR8_MASK, 0x00,
+		REG_TPI_INTR_ST0, 0xff,
+		REG_TPI_INTR_EN, 0x00,
+		REG_HDCP2X_INTR0, 0xff,
+		REG_HDCP2X_INTR0_MASK, 0x00,
+		REG_INTR9, 0xff,
+		REG_INTR9_MASK, 0x00,
+		REG_INTR3, 0xff,
+		REG_INTR3_MASK, 0x00,
+		REG_INTR5, 0xff,
+		REG_INTR5_MASK, 0x00,
+		REG_INTR2, 0xff,
+		REG_INTR2_MASK, 0x00,
+	);
+	memset(ctx->stat, 0, sizeof(ctx->stat));
+	memset(ctx->xstat, 0, sizeof(ctx->xstat));
+	memset(ctx->devcap, 0, sizeof(ctx->devcap));
+	memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap));
+	ctx->cbus_status = 0;
+	ctx->sink_type = SINK_NONE;
+	kfree(ctx->edid);
+	ctx->edid = NULL;
+	sii8620_mt_cleanup(ctx);
+}
+
+static void sii8620_mhl_disconnected(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+		REG_CBUS_MSC_COMPAT_CTRL,
+			BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN
+	);
+	sii8620_disconnect(ctx);
+}
+
+static void sii8620_irq_disc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_CBUS_DISC_INTR0);
+
+	if (stat & VAL_CBUS_MHL_DISCON)
+		sii8620_mhl_disconnected(ctx);
+
+	if (stat & BIT_RGND_READY_INT) {
+		u8 stat2 = sii8620_readb(ctx, REG_DISC_STAT2);
+
+		if ((stat2 & MSK_DISC_STAT2_RGND) == VAL_RGND_1K) {
+			sii8620_mhl_discover(ctx);
+		} else {
+			sii8620_write_seq_static(ctx,
+				REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+					| BIT_DISC_CTRL9_NOMHL_EST
+					| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+				REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT
+					| BIT_CBUS_MHL3_DISCON_INT
+					| BIT_CBUS_MHL12_DISCON_INT
+					| BIT_NOT_MHL_EST_INT
+			);
+		}
+	}
+	if (stat & BIT_MHL_EST_INT)
+		sii8620_mhl_init(ctx);
+
+	sii8620_write(ctx, REG_CBUS_DISC_INTR0, stat);
+}
+
+static void sii8620_irq_g2wb(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_MDT_INT_0);
+
+	if (stat & BIT_MDT_IDLE_AFTER_HAWB_DISABLE)
+		dev_dbg(ctx->dev, "HAWB idle\n");
+
+	sii8620_write(ctx, REG_MDT_INT_0, stat);
+}
+
+static void sii8620_status_changed_dcap(struct sii8620 *ctx)
+{
+	if (ctx->stat[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) {
+		sii8620_set_mode(ctx, CM_MHL1);
+		sii8620_peer_specific_init(ctx);
+		sii8620_write(ctx, REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE
+			       | BIT_INTR9_EDID_DONE | BIT_INTR9_EDID_ERROR);
+	}
+}
+
+static void sii8620_status_changed_path(struct sii8620 *ctx)
+{
+	if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) {
+		sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+				      MHL_DST_LM_CLK_MODE_NORMAL
+				      | MHL_DST_LM_PATH_ENABLED);
+		sii8620_mt_read_devcap(ctx, false);
+	} else {
+		sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+				      MHL_DST_LM_CLK_MODE_NORMAL);
+	}
+}
+
+static void sii8620_msc_mr_write_stat(struct sii8620 *ctx)
+{
+	u8 st[MHL_DST_SIZE], xst[MHL_XDS_SIZE];
+
+	sii8620_read_buf(ctx, REG_MHL_STAT_0, st, MHL_DST_SIZE);
+	sii8620_read_buf(ctx, REG_MHL_EXTSTAT_0, xst, MHL_XDS_SIZE);
+
+	sii8620_update_array(ctx->stat, st, MHL_DST_SIZE);
+	sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE);
+
+	if (st[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY)
+		sii8620_status_changed_dcap(ctx);
+
+	if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
+		sii8620_status_changed_path(ctx);
+}
+
+static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
+{
+	u8 ints[MHL_INT_SIZE];
+
+	sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+	sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+}
+
+static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
+{
+	struct device *dev = ctx->dev;
+
+	if (list_empty(&ctx->mt_queue)) {
+		dev_err(dev, "unexpected MSC MT response\n");
+		return NULL;
+	}
+
+	return list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+}
+
+static void sii8620_msc_mt_done(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
+
+	if (!msg)
+		return;
+
+	msg->ret = sii8620_readb(ctx, REG_MSC_MT_RCVD_DATA0);
+	ctx->mt_state = MT_STATE_DONE;
+}
+
+static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
+	u8 buf[2];
+
+	if (!msg)
+		return;
+
+	sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
+
+	switch (buf[0]) {
+	case MHL_MSC_MSG_RAPK:
+		msg->ret = buf[1];
+		ctx->mt_state = MT_STATE_DONE;
+		break;
+	default:
+		dev_err(ctx->dev, "%s message type %d,%d not supported",
+			__func__, buf[0], buf[1]);
+	}
+}
+
+static void sii8620_irq_msc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_CBUS_INT_0);
+
+	if (stat & ~BIT_CBUS_HPD_CHG)
+		sii8620_write(ctx, REG_CBUS_INT_0, stat & ~BIT_CBUS_HPD_CHG);
+
+	if (stat & BIT_CBUS_HPD_CHG) {
+		u8 cbus_stat = sii8620_readb(ctx, REG_CBUS_STATUS);
+
+		if ((cbus_stat ^ ctx->cbus_status) & BIT_CBUS_STATUS_CBUS_HPD) {
+			sii8620_write(ctx, REG_CBUS_INT_0, BIT_CBUS_HPD_CHG);
+		} else {
+			stat ^= BIT_CBUS_STATUS_CBUS_HPD;
+			cbus_stat ^= BIT_CBUS_STATUS_CBUS_HPD;
+		}
+		ctx->cbus_status = cbus_stat;
+	}
+
+	if (stat & BIT_CBUS_MSC_MR_WRITE_STAT)
+		sii8620_msc_mr_write_stat(ctx);
+
+	if (stat & BIT_CBUS_MSC_MR_SET_INT)
+		sii8620_msc_mr_set_int(ctx);
+
+	if (stat & BIT_CBUS_MSC_MT_DONE)
+		sii8620_msc_mt_done(ctx);
+
+	if (stat & BIT_CBUS_MSC_MR_MSC_MSG)
+		sii8620_msc_mr_msc_msg(ctx);
+}
+
+static void sii8620_irq_coc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_COC_INTR);
+
+	sii8620_write(ctx, REG_COC_INTR, stat);
+}
+
+static void sii8620_irq_merr(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_CBUS_INT_1);
+
+	sii8620_write(ctx, REG_CBUS_INT_1, stat);
+}
+
+static void sii8620_irq_edid(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_INTR9);
+
+	sii8620_write(ctx, REG_INTR9, stat);
+
+	if (stat & BIT_INTR9_DEVCAP_DONE)
+		ctx->mt_state = MT_STATE_DONE;
+}
+
+static void sii8620_scdt_high(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_INTR8_MASK, BIT_CEA_NEW_AVI | BIT_CEA_NEW_VSI,
+		REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI,
+	);
+}
+
+static void sii8620_scdt_low(struct sii8620 *ctx)
+{
+	sii8620_write(ctx, REG_TMDS_CSTAT_P3,
+		      BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS |
+		      BIT_TMDS_CSTAT_P3_CLR_AVI);
+
+	sii8620_stop_video(ctx);
+
+	sii8620_write(ctx, REG_INTR8_MASK, 0);
+}
+
+static void sii8620_irq_scdt(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_INTR5);
+
+	if (stat & BIT_INTR_SCDT_CHANGE) {
+		u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3);
+
+		if (cstat & BIT_TMDS_CSTAT_P3_SCDT)
+			sii8620_scdt_high(ctx);
+		else
+			sii8620_scdt_low(ctx);
+	}
+
+	sii8620_write(ctx, REG_INTR5, stat);
+}
+
+static void sii8620_new_vsi(struct sii8620 *ctx)
+{
+	u8 vsif[11];
+
+	sii8620_write(ctx, REG_RX_HDMI_CTRL2,
+		      VAL_RX_HDMI_CTRL2_DEFVAL |
+		      BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI);
+	sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, vsif,
+			 ARRAY_SIZE(vsif));
+}
+
+static void sii8620_new_avi(struct sii8620 *ctx)
+{
+	sii8620_write(ctx, REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL);
+	sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, ctx->avif,
+			 ARRAY_SIZE(ctx->avif));
+}
+
+static void sii8620_irq_infr(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_INTR8)
+		& (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI);
+
+	sii8620_write(ctx, REG_INTR8, stat);
+
+	if (stat & BIT_CEA_NEW_VSI)
+		sii8620_new_vsi(ctx);
+
+	if (stat & BIT_CEA_NEW_AVI)
+		sii8620_new_avi(ctx);
+
+	if (stat & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI))
+		sii8620_start_video(ctx);
+}
+
+/* endian agnostic, non-volatile version of test_bit */
+static bool sii8620_test_bit(unsigned int nr, const u8 *addr)
+{
+	return 1 & (addr[nr / BITS_PER_BYTE] >> (nr % BITS_PER_BYTE));
+}
+
+static irqreturn_t sii8620_irq_thread(int irq, void *data)
+{
+	static const struct {
+		int bit;
+		void (*handler)(struct sii8620 *ctx);
+	} irq_vec[] = {
+		{ BIT_FAST_INTR_STAT_DISC, sii8620_irq_disc },
+		{ BIT_FAST_INTR_STAT_G2WB, sii8620_irq_g2wb },
+		{ BIT_FAST_INTR_STAT_COC, sii8620_irq_coc },
+		{ BIT_FAST_INTR_STAT_MSC, sii8620_irq_msc },
+		{ BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr },
+		{ BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid },
+		{ BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt },
+		{ BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr },
+	};
+	struct sii8620 *ctx = data;
+	u8 stats[LEN_FAST_INTR_STAT];
+	int i, ret;
+
+	mutex_lock(&ctx->lock);
+
+	sii8620_read_buf(ctx, REG_FAST_INTR_STAT, stats, ARRAY_SIZE(stats));
+	for (i = 0; i < ARRAY_SIZE(irq_vec); ++i)
+		if (sii8620_test_bit(irq_vec[i].bit, stats))
+			irq_vec[i].handler(ctx);
+
+	sii8620_mt_work(ctx);
+
+	ret = sii8620_clear_error(ctx);
+	if (ret) {
+		dev_err(ctx->dev, "Error during IRQ handling, %d.\n", ret);
+		sii8620_mhl_disconnected(ctx);
+	}
+	mutex_unlock(&ctx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void sii8620_cable_in(struct sii8620 *ctx)
+{
+	struct device *dev = ctx->dev;
+	u8 ver[5];
+	int ret;
+
+	ret = sii8620_hw_on(ctx);
+	if (ret) {
+		dev_err(dev, "Error powering on, %d.\n", ret);
+		return;
+	}
+	sii8620_hw_reset(ctx);
+
+	sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
+	ret = sii8620_clear_error(ctx);
+	if (ret) {
+		dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
+		return;
+	}
+
+	dev_info(dev, "ChipID %02x%02x:%02x%02x rev %02x.\n", ver[1], ver[0],
+		 ver[3], ver[2], ver[4]);
+
+	sii8620_write(ctx, REG_DPD,
+		      BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN);
+
+	sii8620_xtal_set_rate(ctx);
+	sii8620_disconnect(ctx);
+
+	sii8620_write_seq_static(ctx,
+		REG_MHL_CBUS_CTL0, VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG
+			| VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734,
+		REG_MHL_CBUS_CTL1, VAL_MHL_CBUS_CTL1_1115_OHM,
+		REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN,
+	);
+
+	ret = sii8620_clear_error(ctx);
+	if (ret) {
+		dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
+		return;
+	}
+
+	enable_irq(to_i2c_client(ctx->dev)->irq);
+}
+
+static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii8620, bridge);
+}
+
+static bool sii8620_mode_fixup(struct drm_bridge *bridge,
+			       const struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+	bool ret = false;
+	int max_clock = 74250;
+
+	mutex_lock(&ctx->lock);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		goto out;
+
+	if (ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL)
+		max_clock = 300000;
+
+	ret = mode->clock <= max_clock;
+
+out:
+	mutex_unlock(&ctx->lock);
+
+	return ret;
+}
+
+static const struct drm_bridge_funcs sii8620_bridge_funcs = {
+	.mode_fixup = sii8620_mode_fixup,
+};
+
+static int sii8620_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct sii8620 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+	mutex_init(&ctx->lock);
+	INIT_LIST_HEAD(&ctx->mt_queue);
+
+	ctx->clk_xtal = devm_clk_get(dev, "xtal");
+	if (IS_ERR(ctx->clk_xtal)) {
+		dev_err(dev, "failed to get xtal clock from DT\n");
+		return PTR_ERR(ctx->clk_xtal);
+	}
+
+	if (!client->irq) {
+		dev_err(dev, "no irq provided\n");
+		return -EINVAL;
+	}
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					sii8620_irq_thread,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"sii8620", ctx);
+
+	ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->gpio_reset)) {
+		dev_err(dev, "failed to get reset gpio from DT\n");
+		return PTR_ERR(ctx->gpio_reset);
+	}
+
+	ctx->supplies[0].supply = "cvcc10";
+	ctx->supplies[1].supply = "iovcc18";
+	ret = devm_regulator_bulk_get(dev, 2, ctx->supplies);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, ctx);
+
+	ctx->bridge.funcs = &sii8620_bridge_funcs;
+	ctx->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ctx->bridge);
+
+	sii8620_cable_in(ctx);
+
+	return 0;
+}
+
+static int sii8620_remove(struct i2c_client *client)
+{
+	struct sii8620 *ctx = i2c_get_clientdata(client);
+
+	disable_irq(to_i2c_client(ctx->dev)->irq);
+	drm_bridge_remove(&ctx->bridge);
+	sii8620_hw_off(ctx);
+
+	return 0;
+}
+
+static const struct of_device_id sii8620_dt_match[] = {
+	{ .compatible = "sil,sii8620" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sii8620_dt_match);
+
+static const struct i2c_device_id sii8620_id[] = {
+	{ "sii8620", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, sii8620_id);
+static struct i2c_driver sii8620_driver = {
+	.driver = {
+		.name	= "sii8620",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(sii8620_dt_match),
+	},
+	.probe		= sii8620_probe,
+	.remove		= sii8620_remove,
+	.id_table = sii8620_id,
+};
+
+module_i2c_driver(sii8620_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.h b/drivers/gpu/drm/bridge/sil-sii8620.h
new file mode 100644
index 000000000000..6ff616a4f6ce
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sil-sii8620.h
@@ -0,0 +1,1517 @@
+/*
+ * Registers of Silicon Image SiI8620 Mobile HD Transmitter
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * Based on MHL driver for Android devices.
+ * Copyright (C) 2013-2014 Silicon Image, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SIL_SII8620_H__
+#define __SIL_SII8620_H__
+
+/* Vendor ID Low byte, default value: 0x01 */
+#define REG_VND_IDL				0x0000
+
+/* Vendor ID High byte, default value: 0x00 */
+#define REG_VND_IDH				0x0001
+
+/* Device ID Low byte, default value: 0x60 */
+#define REG_DEV_IDL				0x0002
+
+/* Device ID High byte, default value: 0x86 */
+#define REG_DEV_IDH				0x0003
+
+/* Device Revision, default value: 0x10 */
+#define REG_DEV_REV				0x0004
+
+/* OTP DBYTE510, default value: 0x00 */
+#define REG_OTP_DBYTE510			0x0006
+
+/* System Control #1, default value: 0x00 */
+#define REG_SYS_CTRL1				0x0008
+#define BIT_SYS_CTRL1_OTPVMUTEOVR_SET		BIT(7)
+#define BIT_SYS_CTRL1_VSYNCPIN			BIT(6)
+#define BIT_SYS_CTRL1_OTPADROPOVR_SET		BIT(5)
+#define BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD		BIT(4)
+#define BIT_SYS_CTRL1_OTP2XVOVR_EN		BIT(3)
+#define BIT_SYS_CTRL1_OTP2XAOVR_EN		BIT(2)
+#define BIT_SYS_CTRL1_TX_CTRL_HDMI		BIT(1)
+#define BIT_SYS_CTRL1_OTPAMUTEOVR_SET		BIT(0)
+
+/* System Control DPD, default value: 0x90 */
+#define REG_DPD					0x000b
+#define BIT_DPD_PWRON_PLL			BIT(7)
+#define BIT_DPD_PDNTX12				BIT(6)
+#define BIT_DPD_PDNRX12				BIT(5)
+#define BIT_DPD_OSC_EN				BIT(4)
+#define BIT_DPD_PWRON_HSIC			BIT(3)
+#define BIT_DPD_PDIDCK_N			BIT(2)
+#define BIT_DPD_PD_MHL_CLK_N			BIT(1)
+
+/* Dual link Control, default value: 0x00 */
+#define REG_DCTL				0x000d
+#define BIT_DCTL_TDM_LCLK_PHASE			BIT(7)
+#define BIT_DCTL_HSIC_CLK_PHASE			BIT(6)
+#define BIT_DCTL_CTS_TCK_PHASE			BIT(5)
+#define BIT_DCTL_EXT_DDC_SEL			BIT(4)
+#define BIT_DCTL_TRANSCODE			BIT(3)
+#define BIT_DCTL_HSIC_RX_STROBE_PHASE		BIT(2)
+#define BIT_DCTL_HSIC_TX_BIST_START_SEL		BIT(1)
+#define BIT_DCTL_TCLKNX_PHASE			BIT(0)
+
+/* PWD Software Reset, default value: 0x20 */
+#define REG_PWD_SRST				0x000e
+#define BIT_PWD_SRST_COC_DOC_RST		BIT(7)
+#define BIT_PWD_SRST_CBUS_RST_SW		BIT(6)
+#define BIT_PWD_SRST_CBUS_RST_SW_EN		BIT(5)
+#define BIT_PWD_SRST_MHLFIFO_RST		BIT(4)
+#define BIT_PWD_SRST_CBUS_RST			BIT(3)
+#define BIT_PWD_SRST_SW_RST_AUTO		BIT(2)
+#define BIT_PWD_SRST_HDCP2X_SW_RST		BIT(1)
+#define BIT_PWD_SRST_SW_RST			BIT(0)
+
+/* AKSV_1, default value: 0x00 */
+#define REG_AKSV_1				0x001d
+
+/* Video H Resolution #1, default value: 0x00 */
+#define REG_H_RESL				0x003a
+
+/* Video Mode, default value: 0x00 */
+#define REG_VID_MODE				0x004a
+#define BIT_VID_MODE_M1080P			BIT(6)
+
+/* Video Input Mode, default value: 0xc0 */
+#define REG_VID_OVRRD				0x0051
+#define BIT_VID_OVRRD_PP_AUTO_DISABLE		BIT(7)
+#define BIT_VID_OVRRD_M1080P_OVRRD		BIT(6)
+#define BIT_VID_OVRRD_MINIVSYNC_ON		BIT(5)
+#define BIT_VID_OVRRD_3DCONV_EN_FRAME_PACK	BIT(4)
+#define BIT_VID_OVRRD_ENABLE_AUTO_PATH_EN	BIT(3)
+#define BIT_VID_OVRRD_ENRGB2YCBCR_OVRRD		BIT(2)
+#define BIT_VID_OVRRD_ENDOWNSAMPLE_OVRRD	BIT(0)
+
+/* I2C Address reassignment, default value: 0x00 */
+#define REG_PAGE_MHLSPEC_ADDR			0x0057
+#define REG_PAGE7_ADDR				0x0058
+#define REG_PAGE8_ADDR				0x005c
+
+/* Fast Interrupt Status, default value: 0x00 */
+#define REG_FAST_INTR_STAT			0x005f
+#define LEN_FAST_INTR_STAT			7
+#define BIT_FAST_INTR_STAT_TIMR			8
+#define BIT_FAST_INTR_STAT_INT2			9
+#define BIT_FAST_INTR_STAT_DDC			10
+#define BIT_FAST_INTR_STAT_SCDT			11
+#define BIT_FAST_INTR_STAT_INFR			13
+#define BIT_FAST_INTR_STAT_EDID			14
+#define BIT_FAST_INTR_STAT_HDCP			15
+#define BIT_FAST_INTR_STAT_MSC			16
+#define BIT_FAST_INTR_STAT_MERR			17
+#define BIT_FAST_INTR_STAT_G2WB			18
+#define BIT_FAST_INTR_STAT_G2WB_ERR		19
+#define BIT_FAST_INTR_STAT_DISC			28
+#define BIT_FAST_INTR_STAT_BLOCK		30
+#define BIT_FAST_INTR_STAT_LTRN			31
+#define BIT_FAST_INTR_STAT_HDCP2		32
+#define BIT_FAST_INTR_STAT_TDM			42
+#define BIT_FAST_INTR_STAT_COC			51
+
+/* GPIO Control, default value: 0x15 */
+#define REG_GPIO_CTRL1				0x006e
+#define BIT_CTRL1_GPIO_I_8			BIT(5)
+#define BIT_CTRL1_GPIO_OEN_8			BIT(4)
+#define BIT_CTRL1_GPIO_I_7			BIT(3)
+#define BIT_CTRL1_GPIO_OEN_7			BIT(2)
+#define BIT_CTRL1_GPIO_I_6			BIT(1)
+#define BIT_CTRL1_GPIO_OEN_6			BIT(0)
+
+/* Interrupt Control, default value: 0x06 */
+#define REG_INT_CTRL				0x006f
+#define BIT_INT_CTRL_SOFTWARE_WP		BIT(7)
+#define BIT_INT_CTRL_INTR_OD			BIT(2)
+#define BIT_INT_CTRL_INTR_POLARITY		BIT(1)
+
+/* Interrupt State, default value: 0x00 */
+#define REG_INTR_STATE				0x0070
+#define BIT_INTR_STATE_INTR_STATE		BIT(0)
+
+/* Interrupt Source #1, default value: 0x00 */
+#define REG_INTR1				0x0071
+
+/* Interrupt Source #2, default value: 0x00 */
+#define REG_INTR2				0x0072
+
+/* Interrupt Source #3, default value: 0x01 */
+#define REG_INTR3				0x0073
+#define BIT_DDC_CMD_DONE			BIT(3)
+
+/* Interrupt Source #5, default value: 0x00 */
+#define REG_INTR5				0x0074
+
+/* Interrupt #1 Mask, default value: 0x00 */
+#define REG_INTR1_MASK				0x0075
+
+/* Interrupt #2 Mask, default value: 0x00 */
+#define REG_INTR2_MASK				0x0076
+
+/* Interrupt #3 Mask, default value: 0x00 */
+#define REG_INTR3_MASK				0x0077
+
+/* Interrupt #5 Mask, default value: 0x00 */
+#define REG_INTR5_MASK				0x0078
+#define BIT_INTR_SCDT_CHANGE			BIT(0)
+
+/* Hot Plug Connection Control, default value: 0x45 */
+#define REG_HPD_CTRL				0x0079
+#define BIT_HPD_CTRL_HPD_DS_SIGNAL		BIT(7)
+#define BIT_HPD_CTRL_HPD_OUT_OD_EN		BIT(6)
+#define BIT_HPD_CTRL_HPD_HIGH			BIT(5)
+#define BIT_HPD_CTRL_HPD_OUT_OVR_EN		BIT(4)
+#define BIT_HPD_CTRL_GPIO_I_1			BIT(3)
+#define BIT_HPD_CTRL_GPIO_OEN_1			BIT(2)
+#define BIT_HPD_CTRL_GPIO_I_0			BIT(1)
+#define BIT_HPD_CTRL_GPIO_OEN_0			BIT(0)
+
+/* GPIO Control, default value: 0x55 */
+#define REG_GPIO_CTRL				0x007a
+#define BIT_CTRL_GPIO_I_5			BIT(7)
+#define BIT_CTRL_GPIO_OEN_5			BIT(6)
+#define BIT_CTRL_GPIO_I_4			BIT(5)
+#define BIT_CTRL_GPIO_OEN_4			BIT(4)
+#define BIT_CTRL_GPIO_I_3			BIT(3)
+#define BIT_CTRL_GPIO_OEN_3			BIT(2)
+#define BIT_CTRL_GPIO_I_2			BIT(1)
+#define BIT_CTRL_GPIO_OEN_2			BIT(0)
+
+/* Interrupt Source 7, default value: 0x00 */
+#define REG_INTR7				0x007b
+
+/* Interrupt Source 8, default value: 0x00 */
+#define REG_INTR8				0x007c
+
+/* Interrupt #7 Mask, default value: 0x00 */
+#define REG_INTR7_MASK				0x007d
+
+/* Interrupt #8 Mask, default value: 0x00 */
+#define REG_INTR8_MASK				0x007e
+#define BIT_CEA_NEW_VSI				BIT(2)
+#define BIT_CEA_NEW_AVI				BIT(1)
+
+/* IEEE, default value: 0x10 */
+#define REG_TMDS_CCTRL				0x0080
+#define BIT_TMDS_CCTRL_TMDS_OE			BIT(4)
+
+/* TMDS Control #4, default value: 0x02 */
+#define REG_TMDS_CTRL4				0x0085
+#define BIT_TMDS_CTRL4_SCDT_CKDT_SEL		BIT(1)
+#define BIT_TMDS_CTRL4_TX_EN_BY_SCDT		BIT(0)
+
+/* BIST CNTL, default value: 0x00 */
+#define REG_BIST_CTRL				0x00bb
+#define BIT_RXBIST_VGB_EN			BIT(7)
+#define BIT_TXBIST_VGB_EN			BIT(6)
+#define BIT_BIST_START_SEL			BIT(5)
+#define BIT_BIST_START_BIT			BIT(4)
+#define BIT_BIST_ALWAYS_ON			BIT(3)
+#define BIT_BIST_TRANS				BIT(2)
+#define BIT_BIST_RESET				BIT(1)
+#define BIT_BIST_EN				BIT(0)
+
+/* BIST DURATION0, default value: 0x00 */
+#define REG_BIST_TEST_SEL			0x00bd
+#define MSK_BIST_TEST_SEL_BIST_PATT_SEL		0x0f
+
+/* BIST VIDEO_MODE, default value: 0x00 */
+#define REG_BIST_VIDEO_MODE			0x00be
+#define MSK_BIST_VIDEO_MODE_BIST_VIDEO_MODE_3_0	0x0f
+
+/* BIST DURATION0, default value: 0x00 */
+#define REG_BIST_DURATION_0			0x00bf
+
+/* BIST DURATION1, default value: 0x00 */
+#define REG_BIST_DURATION_1			0x00c0
+
+/* BIST DURATION2, default value: 0x00 */
+#define REG_BIST_DURATION_2			0x00c1
+
+/* BIST 8BIT_PATTERN, default value: 0x00 */
+#define REG_BIST_8BIT_PATTERN			0x00c2
+
+/* LM DDC, default value: 0x80 */
+#define REG_LM_DDC				0x00c7
+#define BIT_LM_DDC_SW_TPI_EN_DISABLED		BIT(7)
+
+#define BIT_LM_DDC_VIDEO_MUTE_EN		BIT(5)
+#define BIT_LM_DDC_DDC_TPI_SW			BIT(2)
+#define BIT_LM_DDC_DDC_GRANT			BIT(1)
+#define BIT_LM_DDC_DDC_GPU_REQUEST		BIT(0)
+
+/* DDC I2C Manual, default value: 0x03 */
+#define REG_DDC_MANUAL				0x00ec
+#define BIT_DDC_MANUAL_MAN_DDC			BIT(7)
+#define BIT_DDC_MANUAL_VP_SEL			BIT(6)
+#define BIT_DDC_MANUAL_DSDA			BIT(5)
+#define BIT_DDC_MANUAL_DSCL			BIT(4)
+#define BIT_DDC_MANUAL_GCP_HW_CTL_EN		BIT(3)
+#define BIT_DDC_MANUAL_DDCM_ABORT_WP		BIT(2)
+#define BIT_DDC_MANUAL_IO_DSDA			BIT(1)
+#define BIT_DDC_MANUAL_IO_DSCL			BIT(0)
+
+/* DDC I2C Target Slave Address, default value: 0x00 */
+#define REG_DDC_ADDR				0x00ed
+#define MSK_DDC_ADDR_DDC_ADDR			0xfe
+
+/* DDC I2C Target Segment Address, default value: 0x00 */
+#define REG_DDC_SEGM				0x00ee
+
+/* DDC I2C Target Offset Address, default value: 0x00 */
+#define REG_DDC_OFFSET				0x00ef
+
+/* DDC I2C Data In count #1, default value: 0x00 */
+#define REG_DDC_DIN_CNT1			0x00f0
+
+/* DDC I2C Data In count #2, default value: 0x00 */
+#define REG_DDC_DIN_CNT2			0x00f1
+#define MSK_DDC_DIN_CNT2_DDC_DIN_CNT_9_8	0x03
+
+/* DDC I2C Status, default value: 0x04 */
+#define REG_DDC_STATUS				0x00f2
+#define BIT_DDC_STATUS_DDC_BUS_LOW		BIT(6)
+#define BIT_DDC_STATUS_DDC_NO_ACK		BIT(5)
+#define BIT_DDC_STATUS_DDC_I2C_IN_PROG		BIT(4)
+#define BIT_DDC_STATUS_DDC_FIFO_FULL		BIT(3)
+#define BIT_DDC_STATUS_DDC_FIFO_EMPTY		BIT(2)
+#define BIT_DDC_STATUS_DDC_FIFO_READ_IN_SUE	BIT(1)
+#define BIT_DDC_STATUS_DDC_FIFO_WRITE_IN_USE	BIT(0)
+
+/* DDC I2C Command, default value: 0x70 */
+#define REG_DDC_CMD				0x00f3
+#define BIT_DDC_CMD_HDCP_DDC_EN			BIT(6)
+#define BIT_DDC_CMD_SDA_DEL_EN			BIT(5)
+#define BIT_DDC_CMD_DDC_FLT_EN			BIT(4)
+
+#define MSK_DDC_CMD_DDC_CMD			0x0f
+#define VAL_DDC_CMD_ENH_DDC_READ_NO_ACK		0x04
+#define VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO		0x09
+#define VAL_DDC_CMD_DDC_CMD_ABORT		0x0f
+
+/* DDC I2C FIFO Data In/Out, default value: 0x00 */
+#define REG_DDC_DATA				0x00f4
+
+/* DDC I2C Data Out Counter, default value: 0x00 */
+#define REG_DDC_DOUT_CNT			0x00f5
+#define BIT_DDC_DOUT_CNT_DDC_DELAY_CNT_8	BIT(7)
+#define MSK_DDC_DOUT_CNT_DDC_DATA_OUT_CNT	0x1f
+
+/* DDC I2C Delay Count, default value: 0x14 */
+#define REG_DDC_DELAY_CNT			0x00f6
+
+/* Test Control, default value: 0x80 */
+#define REG_TEST_TXCTRL				0x00f7
+#define BIT_TEST_TXCTRL_RCLK_REF_SEL		BIT(7)
+#define BIT_TEST_TXCTRL_PCLK_REF_SEL		BIT(6)
+#define MSK_TEST_TXCTRL_BYPASS_PLL_CLK		0x3c
+#define BIT_TEST_TXCTRL_HDMI_MODE		BIT(1)
+#define BIT_TEST_TXCTRL_TST_PLLCK		BIT(0)
+
+/* CBUS Address, default value: 0x00 */
+#define REG_PAGE_CBUS_ADDR			0x00f8
+
+/* I2C Device Address re-assignment */
+#define REG_PAGE1_ADDR				0x00fc
+#define REG_PAGE2_ADDR				0x00fd
+#define REG_PAGE3_ADDR				0x00fe
+#define REG_HW_TPI_ADDR				0x00ff
+
+/* USBT CTRL0, default value: 0x00 */
+#define REG_UTSRST				0x0100
+#define BIT_UTSRST_FC_SRST			BIT(5)
+#define BIT_UTSRST_KEEPER_SRST			BIT(4)
+#define BIT_UTSRST_HTX_SRST			BIT(3)
+#define BIT_UTSRST_TRX_SRST			BIT(2)
+#define BIT_UTSRST_TTX_SRST			BIT(1)
+#define BIT_UTSRST_HRX_SRST			BIT(0)
+
+/* HSIC RX Control3, default value: 0x07 */
+#define REG_HRXCTRL3				0x0104
+#define MSK_HRXCTRL3_HRX_AFFCTRL		0xf0
+#define BIT_HRXCTRL3_HRX_OUT_EN			BIT(2)
+#define BIT_HRXCTRL3_STATUS_EN			BIT(1)
+#define BIT_HRXCTRL3_HRX_STAY_RESET		BIT(0)
+
+/* HSIC RX INT Registers */
+#define REG_HRXINTL				0x0111
+#define REG_HRXINTH				0x0112
+
+/* TDM TX NUMBITS, default value: 0x0c */
+#define REG_TTXNUMB				0x0116
+#define MSK_TTXNUMB_TTX_AFFCTRL_3_0		0xf0
+#define BIT_TTXNUMB_TTX_COM1_AT_SYNC_WAIT	BIT(3)
+#define MSK_TTXNUMB_TTX_NUMBPS_2_0		0x07
+
+/* TDM TX NUMSPISYM, default value: 0x04 */
+#define REG_TTXSPINUMS				0x0117
+
+/* TDM TX NUMHSICSYM, default value: 0x14 */
+#define REG_TTXHSICNUMS				0x0118
+
+/* TDM TX NUMTOTSYM, default value: 0x18 */
+#define REG_TTXTOTNUMS				0x0119
+
+/* TDM TX INT Low, default value: 0x00 */
+#define REG_TTXINTL				0x0136
+#define BIT_TTXINTL_TTX_INTR7			BIT(7)
+#define BIT_TTXINTL_TTX_INTR6			BIT(6)
+#define BIT_TTXINTL_TTX_INTR5			BIT(5)
+#define BIT_TTXINTL_TTX_INTR4			BIT(4)
+#define BIT_TTXINTL_TTX_INTR3			BIT(3)
+#define BIT_TTXINTL_TTX_INTR2			BIT(2)
+#define BIT_TTXINTL_TTX_INTR1			BIT(1)
+#define BIT_TTXINTL_TTX_INTR0			BIT(0)
+
+/* TDM TX INT High, default value: 0x00 */
+#define REG_TTXINTH				0x0137
+#define BIT_TTXINTH_TTX_INTR15			BIT(7)
+#define BIT_TTXINTH_TTX_INTR14			BIT(6)
+#define BIT_TTXINTH_TTX_INTR13			BIT(5)
+#define BIT_TTXINTH_TTX_INTR12			BIT(4)
+#define BIT_TTXINTH_TTX_INTR11			BIT(3)
+#define BIT_TTXINTH_TTX_INTR10			BIT(2)
+#define BIT_TTXINTH_TTX_INTR9			BIT(1)
+#define BIT_TTXINTH_TTX_INTR8			BIT(0)
+
+/* TDM RX Control, default value: 0x1c */
+#define REG_TRXCTRL				0x013b
+#define BIT_TRXCTRL_TRX_CLR_WVALLOW		BIT(4)
+#define BIT_TRXCTRL_TRX_FROM_SE_COC		BIT(3)
+#define MSK_TRXCTRL_TRX_NUMBPS_2_0		0x07
+
+/* TDM RX NUMSPISYM, default value: 0x04 */
+#define REG_TRXSPINUMS				0x013c
+
+/* TDM RX NUMHSICSYM, default value: 0x14 */
+#define REG_TRXHSICNUMS				0x013d
+
+/* TDM RX NUMTOTSYM, default value: 0x18 */
+#define REG_TRXTOTNUMS				0x013e
+
+/* TDM RX Status 2nd, default value: 0x00 */
+#define REG_TRXSTA2				0x015c
+
+/* TDM RX INT Low, default value: 0x00 */
+#define REG_TRXINTL				0x0163
+
+/* TDM RX INT High, default value: 0x00 */
+#define REG_TRXINTH				0x0164
+
+/* TDM RX INTMASK High, default value: 0x00 */
+#define REG_TRXINTMH				0x0166
+
+/* HSIC TX CRTL, default value: 0x00 */
+#define REG_HTXCTRL				0x0169
+#define BIT_HTXCTRL_HTX_ALLSBE_SOP		BIT(4)
+#define BIT_HTXCTRL_HTX_RGDINV_USB		BIT(3)
+#define BIT_HTXCTRL_HTX_RSPTDM_BUSY		BIT(2)
+#define BIT_HTXCTRL_HTX_DRVCONN1		BIT(1)
+#define BIT_HTXCTRL_HTX_DRVRST1			BIT(0)
+
+/* HSIC TX INT Low, default value: 0x00 */
+#define REG_HTXINTL				0x017d
+
+/* HSIC TX INT High, default value: 0x00 */
+#define REG_HTXINTH				0x017e
+
+/* HSIC Keeper, default value: 0x00 */
+#define REG_KEEPER				0x0181
+#define MSK_KEEPER_KEEPER_MODE_1_0		0x03
+
+/* HSIC Flow Control General, default value: 0x02 */
+#define REG_FCGC				0x0183
+#define BIT_FCGC_HSIC_FC_HOSTMODE		BIT(1)
+#define BIT_FCGC_HSIC_FC_ENABLE			BIT(0)
+
+/* HSIC Flow Control CTR13, default value: 0xfc */
+#define REG_FCCTR13				0x0191
+
+/* HSIC Flow Control CTR14, default value: 0xff */
+#define REG_FCCTR14				0x0192
+
+/* HSIC Flow Control CTR15, default value: 0xff */
+#define REG_FCCTR15				0x0193
+
+/* HSIC Flow Control CTR50, default value: 0x03 */
+#define REG_FCCTR50				0x01b6
+
+/* HSIC Flow Control INTR0, default value: 0x00 */
+#define REG_FCINTR0				0x01ec
+#define REG_FCINTR1				0x01ed
+#define REG_FCINTR2				0x01ee
+#define REG_FCINTR3				0x01ef
+#define REG_FCINTR4				0x01f0
+#define REG_FCINTR5				0x01f1
+#define REG_FCINTR6				0x01f2
+#define REG_FCINTR7				0x01f3
+
+/* TDM Low Latency, default value: 0x20 */
+#define REG_TDMLLCTL				0x01fc
+#define MSK_TDMLLCTL_TRX_LL_SEL_MANUAL		0xc0
+#define MSK_TDMLLCTL_TRX_LL_SEL_MODE		0x30
+#define MSK_TDMLLCTL_TTX_LL_SEL_MANUAL		0x0c
+#define BIT_TDMLLCTL_TTX_LL_TIE_LOW		BIT(1)
+#define BIT_TDMLLCTL_TTX_LL_SEL_MODE		BIT(0)
+
+/* TMDS 0 Clock Control, default value: 0x10 */
+#define REG_TMDS0_CCTRL1			0x0210
+#define MSK_TMDS0_CCTRL1_TEST_SEL		0xc0
+#define MSK_TMDS0_CCTRL1_CLK1X_CTL		0x30
+
+/* TMDS Clock Enable, default value: 0x00 */
+#define REG_TMDS_CLK_EN				0x0211
+#define BIT_TMDS_CLK_EN_CLK_EN			BIT(0)
+
+/* TMDS Channel Enable, default value: 0x00 */
+#define REG_TMDS_CH_EN				0x0212
+#define BIT_TMDS_CH_EN_CH0_EN			BIT(4)
+#define BIT_TMDS_CH_EN_CH12_EN			BIT(0)
+
+/* BGR_BIAS, default value: 0x07 */
+#define REG_BGR_BIAS				0x0215
+#define BIT_BGR_BIAS_BGR_EN			BIT(7)
+#define MSK_BGR_BIAS_BIAS_BGR_D			0x0f
+
+/* TMDS 0 Digital I2C BW, default value: 0x0a */
+#define REG_ALICE0_BW_I2C			0x0231
+
+/* TMDS 0 Digital Zone Control, default value: 0xe0 */
+#define REG_ALICE0_ZONE_CTRL			0x024c
+#define BIT_ALICE0_ZONE_CTRL_ICRST_N		BIT(7)
+#define BIT_ALICE0_ZONE_CTRL_USE_INT_DIV20	BIT(6)
+#define MSK_ALICE0_ZONE_CTRL_SZONE_I2C		0x30
+#define MSK_ALICE0_ZONE_CTRL_ZONE_CTRL		0x0f
+
+/* TMDS 0 Digital PLL Mode Control, default value: 0x00 */
+#define REG_ALICE0_MODE_CTRL			0x024d
+#define MSK_ALICE0_MODE_CTRL_PLL_MODE_I2C	0x0c
+#define MSK_ALICE0_MODE_CTRL_DIV20_CTRL		0x03
+
+/* MHL Tx Control 6th, default value: 0xa0 */
+#define REG_MHLTX_CTL6				0x0285
+#define MSK_MHLTX_CTL6_EMI_SEL			0xe0
+#define MSK_MHLTX_CTL6_TX_CLK_SHAPE_9_8		0x03
+
+/* Packet Filter0, default value: 0x00 */
+#define REG_PKT_FILTER_0			0x0290
+#define BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT	BIT(7)
+#define BIT_PKT_FILTER_0_DROP_CEA_CP_PKT	BIT(6)
+#define BIT_PKT_FILTER_0_DROP_MPEG_PKT		BIT(5)
+#define BIT_PKT_FILTER_0_DROP_SPIF_PKT		BIT(4)
+#define BIT_PKT_FILTER_0_DROP_AIF_PKT		BIT(3)
+#define BIT_PKT_FILTER_0_DROP_AVI_PKT		BIT(2)
+#define BIT_PKT_FILTER_0_DROP_CTS_PKT		BIT(1)
+#define BIT_PKT_FILTER_0_DROP_GCP_PKT		BIT(0)
+
+/* Packet Filter1, default value: 0x00 */
+#define REG_PKT_FILTER_1			0x0291
+#define BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS	BIT(7)
+#define BIT_PKT_FILTER_1_AVI_OVERRIDE_DIS	BIT(6)
+#define BIT_PKT_FILTER_1_DROP_AUDIO_PKT		BIT(3)
+#define BIT_PKT_FILTER_1_DROP_GEN2_PKT		BIT(2)
+#define BIT_PKT_FILTER_1_DROP_GEN_PKT		BIT(1)
+#define BIT_PKT_FILTER_1_DROP_VSIF_PKT		BIT(0)
+
+/* TMDS Clock Status, default value: 0x10 */
+#define REG_TMDS_CSTAT_P3			0x02a0
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_CLR_MUTE	BIT(7)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_SET_MUTE	BIT(6)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_NEW_CP	BIT(5)
+#define BIT_TMDS_CSTAT_P3_CLR_AVI		BIT(3)
+#define BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS	BIT(2)
+#define BIT_TMDS_CSTAT_P3_SCDT			BIT(1)
+#define BIT_TMDS_CSTAT_P3_CKDT			BIT(0)
+
+/* RX_HDMI Control, default value: 0x10 */
+#define REG_RX_HDMI_CTRL0			0x02a1
+#define BIT_RX_HDMI_CTRL0_BYP_DVIFILT_SYNC	BIT(5)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_EN_ITSELF_CLR BIT(4)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_SW_VALUE	BIT(3)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_OVERWRITE	BIT(2)
+#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE_EN	BIT(1)
+#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE	BIT(0)
+
+/* RX_HDMI Control, default value: 0x38 */
+#define REG_RX_HDMI_CTRL2			0x02a3
+#define MSK_RX_HDMI_CTRL2_IDLE_CNT		0xf0
+#define VAL_RX_HDMI_CTRL2_IDLE_CNT(n)		((n) << 4)
+#define BIT_RX_HDMI_CTRL2_USE_AV_MUTE		BIT(3)
+#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI	BIT(0)
+
+/* RX_HDMI Control, default value: 0x0f */
+#define REG_RX_HDMI_CTRL3			0x02a4
+#define MSK_RX_HDMI_CTRL3_PP_MODE_CLK_EN	0x0f
+
+/* rx_hdmi Clear Buffer, default value: 0x00 */
+#define REG_RX_HDMI_CLR_BUFFER			0x02ac
+#define MSK_RX_HDMI_CLR_BUFFER_AIF4VSI_CMP	0xc0
+#define BIT_RX_HDMI_CLR_BUFFER_USE_AIF4VSI	BIT(5)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_W_AVI	BIT(4)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_IEEE_ID_CHK_EN BIT(3)
+#define BIT_RX_HDMI_CLR_BUFFER_SWAP_VSI_IEEE_ID	BIT(2)
+#define BIT_RX_HDMI_CLR_BUFFER_AIF_CLR_EN	BIT(1)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN	BIT(0)
+
+/* RX_HDMI VSI Header1, default value: 0x00 */
+#define REG_RX_HDMI_MON_PKT_HEADER1		0x02b8
+
+/* RX_HDMI VSI MHL Monitor, default value: 0x3c */
+#define REG_RX_HDMI_VSIF_MHL_MON		0x02d7
+
+#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_3D_FORMAT 0x3c
+#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_VID_FORMAT 0x03
+
+/* Interrupt Source 9, default value: 0x00 */
+#define REG_INTR9				0x02e0
+#define BIT_INTR9_EDID_ERROR			BIT(6)
+#define BIT_INTR9_EDID_DONE			BIT(5)
+#define BIT_INTR9_DEVCAP_DONE			BIT(4)
+
+/* Interrupt 9 Mask, default value: 0x00 */
+#define REG_INTR9_MASK				0x02e1
+
+/* TPI CBUS Start, default value: 0x00 */
+#define REG_TPI_CBUS_START			0x02e2
+#define BIT_TPI_CBUS_START_RCP_REQ_START	BIT(7)
+#define BIT_TPI_CBUS_START_RCPK_REPLY_START	BIT(6)
+#define BIT_TPI_CBUS_START_RCPE_REPLY_START	BIT(5)
+#define BIT_TPI_CBUS_START_PUT_LINK_MODE_START	BIT(4)
+#define BIT_TPI_CBUS_START_PUT_DCAPCHG_START	BIT(3)
+#define BIT_TPI_CBUS_START_PUT_DCAPRDY_START	BIT(2)
+#define BIT_TPI_CBUS_START_GET_EDID_START_0	BIT(1)
+#define BIT_TPI_CBUS_START_GET_DEVCAP_START	BIT(0)
+
+/* EDID Control, default value: 0x10 */
+#define REG_EDID_CTRL				0x02e3
+#define BIT_EDID_CTRL_EDID_PRIME_VALID		BIT(7)
+#define BIT_EDID_CTRL_XDEVCAP_EN		BIT(6)
+#define BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP	BIT(5)
+#define BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO	BIT(4)
+#define BIT_EDID_CTRL_EDID_FIFO_ACCESS_ALWAYS_EN BIT(3)
+#define BIT_EDID_CTRL_EDID_FIFO_BLOCK_SEL	BIT(2)
+#define BIT_EDID_CTRL_INVALID_BKSV		BIT(1)
+#define BIT_EDID_CTRL_EDID_MODE_EN		BIT(0)
+
+/* EDID FIFO Addr, default value: 0x00 */
+#define REG_EDID_FIFO_ADDR			0x02e9
+
+/* EDID FIFO Write Data, default value: 0x00 */
+#define REG_EDID_FIFO_WR_DATA			0x02ea
+
+/* EDID/DEVCAP FIFO Internal Addr, default value: 0x00 */
+#define REG_EDID_FIFO_ADDR_MON			0x02eb
+
+/* EDID FIFO Read Data, default value: 0x00 */
+#define REG_EDID_FIFO_RD_DATA			0x02ec
+
+/* EDID DDC Segment Pointer, default value: 0x00 */
+#define REG_EDID_START_EXT			0x02ed
+
+/* TX IP BIST CNTL and Status, default value: 0x00 */
+#define REG_TX_IP_BIST_CNTLSTA			0x02f2
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_QUARTER_CLK_SEL BIT(6)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_DONE	BIT(5)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_ON	BIT(4)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_RUN	BIT(3)
+#define BIT_TX_IP_BIST_CNTLSTA_TXCLK_HALF_SEL	BIT(2)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_EN	BIT(1)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_SEL	BIT(0)
+
+/* TX IP BIST INST LOW, default value: 0x00 */
+#define REG_TX_IP_BIST_INST_LOW			0x02f3
+#define REG_TX_IP_BIST_INST_HIGH		0x02f4
+
+/* TX IP BIST PATTERN LOW, default value: 0x00 */
+#define REG_TX_IP_BIST_PAT_LOW			0x02f5
+#define REG_TX_IP_BIST_PAT_HIGH			0x02f6
+
+/* TX IP BIST CONFIGURE LOW, default value: 0x00 */
+#define REG_TX_IP_BIST_CONF_LOW			0x02f7
+#define REG_TX_IP_BIST_CONF_HIGH		0x02f8
+
+/* E-MSC General Control, default value: 0x80 */
+#define REG_GENCTL				0x0300
+#define BIT_GENCTL_SPEC_TRANS_DIS		BIT(7)
+#define BIT_GENCTL_DIS_XMIT_ERR_STATE		BIT(6)
+#define BIT_GENCTL_SPI_MISO_EDGE		BIT(5)
+#define BIT_GENCTL_SPI_MOSI_EDGE		BIT(4)
+#define BIT_GENCTL_CLR_EMSC_RFIFO		BIT(3)
+#define BIT_GENCTL_CLR_EMSC_XFIFO		BIT(2)
+#define BIT_GENCTL_START_TRAIN_SEQ		BIT(1)
+#define BIT_GENCTL_EMSC_EN			BIT(0)
+
+/* E-MSC Comma ErrorCNT, default value: 0x03 */
+#define REG_COMMECNT				0x0305
+#define BIT_COMMECNT_I2C_TO_EMSC_EN		BIT(7)
+#define MSK_COMMECNT_COMMA_CHAR_ERR_CNT		0x0f
+
+/* E-MSC RFIFO ByteCnt, default value: 0x00 */
+#define REG_EMSCRFIFOBCNTL			0x031a
+#define REG_EMSCRFIFOBCNTH			0x031b
+
+/* SPI Burst Cnt Status, default value: 0x00 */
+#define REG_SPIBURSTCNT				0x031e
+
+/* SPI Burst Status and SWRST, default value: 0x00 */
+#define REG_SPIBURSTSTAT			0x0322
+#define BIT_SPIBURSTSTAT_SPI_HDCPRST		BIT(7)
+#define BIT_SPIBURSTSTAT_SPI_CBUSRST		BIT(6)
+#define BIT_SPIBURSTSTAT_SPI_SRST		BIT(5)
+#define BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE	BIT(0)
+
+/* E-MSC 1st Interrupt, default value: 0x00 */
+#define REG_EMSCINTR				0x0323
+#define BIT_EMSCINTR_EMSC_XFIFO_EMPTY		BIT(7)
+#define BIT_EMSCINTR_EMSC_XMIT_ACK_TOUT		BIT(6)
+#define BIT_EMSCINTR_EMSC_RFIFO_READ_ERR	BIT(5)
+#define BIT_EMSCINTR_EMSC_XFIFO_WRITE_ERR	BIT(4)
+#define BIT_EMSCINTR_EMSC_COMMA_CHAR_ERR	BIT(3)
+#define BIT_EMSCINTR_EMSC_XMIT_DONE		BIT(2)
+#define BIT_EMSCINTR_EMSC_XMIT_GNT_TOUT		BIT(1)
+#define BIT_EMSCINTR_SPI_DVLD		BIT(0)
+
+/* E-MSC Interrupt Mask, default value: 0x00 */
+#define REG_EMSCINTRMASK			0x0324
+
+/* I2C E-MSC XMIT FIFO Write Port, default value: 0x00 */
+#define REG_EMSC_XMIT_WRITE_PORT		0x032a
+
+/* I2C E-MSC RCV FIFO Write Port, default value: 0x00 */
+#define REG_EMSC_RCV_READ_PORT			0x032b
+
+/* E-MSC 2nd Interrupt, default value: 0x00 */
+#define REG_EMSCINTR1				0x032c
+#define BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR	BIT(0)
+
+/* E-MSC Interrupt Mask, default value: 0x00 */
+#define REG_EMSCINTRMASK1			0x032d
+#define BIT_EMSCINTRMASK1_EMSC_INTRMASK1_0	BIT(0)
+
+/* MHL Top Ctl, default value: 0x00 */
+#define REG_MHL_TOP_CTL				0x0330
+#define BIT_MHL_TOP_CTL_MHL3_DOC_SEL		BIT(7)
+#define BIT_MHL_TOP_CTL_MHL_PP_SEL		BIT(6)
+#define MSK_MHL_TOP_CTL_IF_TIMING_CTL		0x03
+
+/* MHL DataPath 1st Ctl, default value: 0xbc */
+#define REG_MHL_DP_CTL0				0x0331
+#define BIT_MHL_DP_CTL0_DP_OE			BIT(7)
+#define BIT_MHL_DP_CTL0_TX_OE_OVR		BIT(6)
+#define MSK_MHL_DP_CTL0_TX_OE			0x3f
+
+/* MHL DataPath 2nd Ctl, default value: 0xbb */
+#define REG_MHL_DP_CTL1				0x0332
+#define MSK_MHL_DP_CTL1_CK_SWING_CTL		0xf0
+#define MSK_MHL_DP_CTL1_DT_SWING_CTL		0x0f
+
+/* MHL DataPath 3rd Ctl, default value: 0x2f */
+#define REG_MHL_DP_CTL2				0x0333
+#define BIT_MHL_DP_CTL2_CLK_BYPASS_EN		BIT(7)
+#define MSK_MHL_DP_CTL2_DAMP_TERM_SEL		0x30
+#define MSK_MHL_DP_CTL2_CK_TERM_SEL		0x0c
+#define MSK_MHL_DP_CTL2_DT_TERM_SEL		0x03
+
+/* MHL DataPath 4th Ctl, default value: 0x48 */
+#define REG_MHL_DP_CTL3				0x0334
+#define MSK_MHL_DP_CTL3_DT_DRV_VNBC_CTL		0xf0
+#define MSK_MHL_DP_CTL3_DT_DRV_VNB_CTL		0x0f
+
+/* MHL DataPath 5th Ctl, default value: 0x48 */
+#define REG_MHL_DP_CTL4				0x0335
+#define MSK_MHL_DP_CTL4_CK_DRV_VNBC_CTL		0xf0
+#define MSK_MHL_DP_CTL4_CK_DRV_VNB_CTL		0x0f
+
+/* MHL DataPath 6th Ctl, default value: 0x3f */
+#define REG_MHL_DP_CTL5				0x0336
+#define BIT_MHL_DP_CTL5_RSEN_EN_OVR		BIT(7)
+#define BIT_MHL_DP_CTL5_RSEN_EN			BIT(6)
+#define MSK_MHL_DP_CTL5_DAMP_TERM_VGS_CTL	0x30
+#define MSK_MHL_DP_CTL5_CK_TERM_VGS_CTL		0x0c
+#define MSK_MHL_DP_CTL5_DT_TERM_VGS_CTL		0x03
+
+/* MHL PLL 1st Ctl, default value: 0x05 */
+#define REG_MHL_PLL_CTL0			0x0337
+#define BIT_MHL_PLL_CTL0_AUD_CLK_EN		BIT(7)
+
+#define MSK_MHL_PLL_CTL0_AUD_CLK_RATIO		0x70
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_10	0x70
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_6	0x60
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_4	0x50
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2	0x40
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_5	0x30
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_3	0x20
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2_PRIME 0x10
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_1	0x00
+
+#define MSK_MHL_PLL_CTL0_HDMI_CLK_RATIO		0x0c
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_4X	0x0c
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_2X	0x08
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X	0x04
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_HALF_X	0x00
+
+#define BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL	BIT(1)
+#define BIT_MHL_PLL_CTL0_ZONE_MASK_OE		BIT(0)
+
+/* MHL PLL 3rd Ctl, default value: 0x80 */
+#define REG_MHL_PLL_CTL2			0x0339
+#define BIT_MHL_PLL_CTL2_CLKDETECT_EN		BIT(7)
+#define BIT_MHL_PLL_CTL2_MEAS_FVCO		BIT(3)
+#define BIT_MHL_PLL_CTL2_PLL_FAST_LOCK		BIT(2)
+#define MSK_MHL_PLL_CTL2_PLL_LF_SEL		0x03
+
+/* MHL CBUS 1st Ctl, default value: 0x12 */
+#define REG_MHL_CBUS_CTL0			0x0340
+#define BIT_MHL_CBUS_CTL0_CBUS_RGND_TEST_MODE	BIT(7)
+
+#define MSK_MHL_CBUS_CTL0_CBUS_RGND_VTH_CTL	0x30
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734	0x00
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_747	0x10
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_740	0x20
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_754	0x30
+
+#define MSK_MHL_CBUS_CTL0_CBUS_RES_TEST_SEL	0x0c
+
+#define MSK_MHL_CBUS_CTL0_CBUS_DRV_SEL		0x03
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAKEST	0x00
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAK	0x01
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG	0x02
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONGEST 0x03
+
+/* MHL CBUS 2nd Ctl, default value: 0x03 */
+#define REG_MHL_CBUS_CTL1			0x0341
+#define MSK_MHL_CBUS_CTL1_CBUS_RGND_RES_CTL	0x07
+#define VAL_MHL_CBUS_CTL1_0888_OHM		0x00
+#define VAL_MHL_CBUS_CTL1_1115_OHM		0x04
+#define VAL_MHL_CBUS_CTL1_1378_OHM		0x07
+
+/* MHL CoC 1st Ctl, default value: 0xc3 */
+#define REG_MHL_COC_CTL0			0x0342
+#define BIT_MHL_COC_CTL0_COC_BIAS_EN		BIT(7)
+#define MSK_MHL_COC_CTL0_COC_BIAS_CTL		0x70
+#define MSK_MHL_COC_CTL0_COC_TERM_CTL		0x07
+
+/* MHL CoC 2nd Ctl, default value: 0x87 */
+#define REG_MHL_COC_CTL1			0x0343
+#define BIT_MHL_COC_CTL1_COC_EN			BIT(7)
+#define MSK_MHL_COC_CTL1_COC_DRV_CTL		0x3f
+
+/* MHL CoC 4th Ctl, default value: 0x00 */
+#define REG_MHL_COC_CTL3			0x0345
+#define BIT_MHL_COC_CTL3_COC_AECHO_EN		BIT(0)
+
+/* MHL CoC 5th Ctl, default value: 0x28 */
+#define REG_MHL_COC_CTL4			0x0346
+#define MSK_MHL_COC_CTL4_COC_IF_CTL		0xf0
+#define MSK_MHL_COC_CTL4_COC_SLEW_CTL		0x0f
+
+/* MHL CoC 6th Ctl, default value: 0x0d */
+#define REG_MHL_COC_CTL5			0x0347
+
+/* MHL DoC 1st Ctl, default value: 0x18 */
+#define REG_MHL_DOC_CTL0			0x0349
+#define BIT_MHL_DOC_CTL0_DOC_RXDATA_EN		BIT(7)
+#define MSK_MHL_DOC_CTL0_DOC_DM_TERM		0x38
+#define MSK_MHL_DOC_CTL0_DOC_OPMODE		0x06
+#define BIT_MHL_DOC_CTL0_DOC_RXBIAS_EN		BIT(0)
+
+/* MHL DataPath 7th Ctl, default value: 0x2a */
+#define REG_MHL_DP_CTL6				0x0350
+#define BIT_MHL_DP_CTL6_DP_TAP2_SGN		BIT(5)
+#define BIT_MHL_DP_CTL6_DP_TAP2_EN		BIT(4)
+#define BIT_MHL_DP_CTL6_DP_TAP1_SGN		BIT(3)
+#define BIT_MHL_DP_CTL6_DP_TAP1_EN		BIT(2)
+#define BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN	BIT(1)
+#define BIT_MHL_DP_CTL6_DP_PRE_POST_SEL		BIT(0)
+
+/* MHL DataPath 8th Ctl, default value: 0x06 */
+#define REG_MHL_DP_CTL7				0x0351
+#define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL	0xf0
+#define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL		0x0f
+
+/* Tx Zone Ctl1, default value: 0x00 */
+#define REG_TX_ZONE_CTL1			0x0361
+#define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE	0x08
+
+/* MHL3 Tx Zone Ctl, default value: 0x00 */
+#define REG_MHL3_TX_ZONE_CTL			0x0364
+#define BIT_MHL3_TX_ZONE_CTL_MHL2_INTPLT_ZONE_MANU_EN BIT(7)
+#define MSK_MHL3_TX_ZONE_CTL_MHL3_TX_ZONE	0x03
+
+#define MSK_TX_ZONE_CTL3_TX_ZONE		0x03
+#define VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS		0x00
+#define VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS		0x01
+#define VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS	0x02
+
+/* HDCP Polling Control and Status, default value: 0x70 */
+#define REG_HDCP2X_POLL_CS			0x0391
+
+#define BIT_HDCP2X_POLL_CS_HDCP2X_MSG_SZ_CLR_OPTION BIT(6)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_RPT_READY_CLR_OPTION BIT(5)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_REAUTH_REQ_CLR_OPTION BIT(4)
+#define MSK_HDCP2X_POLL_CS_			0x0c
+#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_GNT	BIT(1)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_EN	BIT(0)
+
+/* HDCP Interrupt 0, default value: 0x00 */
+#define REG_HDCP2X_INTR0			0x0398
+
+/* HDCP Interrupt 0 Mask, default value: 0x00 */
+#define REG_HDCP2X_INTR0_MASK			0x0399
+
+/* HDCP General Control 0, default value: 0x02 */
+#define REG_HDCP2X_CTRL_0			0x03a0
+#define BIT_HDCP2X_CTRL_0_HDCP2X_ENCRYPT_EN	BIT(7)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_SEL	BIT(6)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_OVR	BIT(5)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_PRECOMPUTE	BIT(4)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_HDMIMODE	BIT(3)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_REPEATER	BIT(2)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX		BIT(1)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_EN		BIT(0)
+
+/* HDCP General Control 1, default value: 0x08 */
+#define REG_HDCP2X_CTRL_1			0x03a1
+#define MSK_HDCP2X_CTRL_1_HDCP2X_REAUTH_MSK_3_0	0xf0
+#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_SW		BIT(3)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_OVR	BIT(2)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_CTL3MSK	BIT(1)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_REAUTH_SW	BIT(0)
+
+/* HDCP Misc Control, default value: 0x00 */
+#define REG_HDCP2X_MISC_CTRL			0x03a5
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_XFER_START BIT(4)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR_START BIT(3)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR	BIT(2)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD_START BIT(1)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD	BIT(0)
+
+/* HDCP RPT SMNG K, default value: 0x00 */
+#define REG_HDCP2X_RPT_SMNG_K			0x03a6
+
+/* HDCP RPT SMNG In, default value: 0x00 */
+#define REG_HDCP2X_RPT_SMNG_IN			0x03a7
+
+/* HDCP Auth Status, default value: 0x00 */
+#define REG_HDCP2X_AUTH_STAT			0x03aa
+
+/* HDCP RPT RCVID Out, default value: 0x00 */
+#define REG_HDCP2X_RPT_RCVID_OUT		0x03ac
+
+/* HDCP TP1, default value: 0x62 */
+#define REG_HDCP2X_TP1				0x03b4
+
+/* HDCP GP Out 0, default value: 0x00 */
+#define REG_HDCP2X_GP_OUT0			0x03c7
+
+/* HDCP Repeater RCVR ID 0, default value: 0x00 */
+#define REG_HDCP2X_RPT_RCVR_ID0			0x03d1
+
+/* HDCP DDCM Status, default value: 0x00 */
+#define REG_HDCP2X_DDCM_STS			0x03d8
+#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_ERR_STS_3_0 0xf0
+#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_CTL_CS_3_0 0x0f
+
+/* HDMI2MHL3 Control, default value: 0x0a */
+#define REG_M3_CTRL				0x03e0
+#define BIT_M3_CTRL_H2M_SWRST			BIT(4)
+#define BIT_M3_CTRL_SW_MHL3_SEL			BIT(3)
+#define BIT_M3_CTRL_M3AV_EN			BIT(2)
+#define BIT_M3_CTRL_ENC_TMDS			BIT(1)
+#define BIT_M3_CTRL_MHL3_MASTER_EN		BIT(0)
+
+#define VAL_M3_CTRL_MHL1_2_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \
+				  | BIT_M3_CTRL_ENC_TMDS)
+#define VAL_M3_CTRL_MHL3_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \
+				| BIT_M3_CTRL_M3AV_EN \
+				| BIT_M3_CTRL_ENC_TMDS \
+				| BIT_M3_CTRL_MHL3_MASTER_EN)
+
+/* HDMI2MHL3 Port0 Control, default value: 0x04 */
+#define REG_M3_P0CTRL				0x03e1
+#define BIT_M3_P0CTRL_MHL3_P0_HDCP_ENC_EN	BIT(4)
+#define BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN	BIT(3)
+#define BIT_M3_P0CTRL_MHL3_P0_HDCP_EN		BIT(2)
+#define BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED	BIT(1)
+#define BIT_M3_P0CTRL_MHL3_P0_PORT_EN		BIT(0)
+
+#define REG_M3_POSTM				0x03e2
+#define MSK_M3_POSTM_RRP_DECODE			0xf8
+#define MSK_M3_POSTM_MHL3_P0_STM_ID		0x07
+
+/* HDMI2MHL3 Scramble Control, default value: 0x41 */
+#define REG_M3_SCTRL				0x03e6
+#define MSK_M3_SCTRL_MHL3_SR_LENGTH		0xf0
+#define BIT_M3_SCTRL_MHL3_SCRAMBLER_EN		BIT(0)
+
+/* HSIC Div Ctl, default value: 0x05 */
+#define REG_DIV_CTL_MAIN			0x03f2
+#define MSK_DIV_CTL_MAIN_PRE_DIV_CTL_MAIN	0x1c
+#define MSK_DIV_CTL_MAIN_FB_DIV_CTL_MAIN	0x03
+
+/* MHL Capability 1st Byte, default value: 0x00 */
+#define REG_MHL_DEVCAP_0			0x0400
+
+/* MHL Interrupt 1st Byte, default value: 0x00 */
+#define REG_MHL_INT_0				0x0420
+
+/* Device Status 1st byte, default value: 0x00 */
+#define REG_MHL_STAT_0				0x0430
+
+/* CBUS Scratch Pad 1st Byte, default value: 0x00 */
+#define REG_MHL_SCRPAD_0			0x0440
+
+/* MHL Extended Capability 1st Byte, default value: 0x00 */
+#define REG_MHL_EXTDEVCAP_0			0x0480
+
+/* Device Extended Status 1st byte, default value: 0x00 */
+#define REG_MHL_EXTSTAT_0			0x0490
+
+/* TPI DTD Byte2, default value: 0x00 */
+#define REG_TPI_DTD_B2				0x0602
+
+#define VAL_TPI_QUAN_RANGE_LIMITED		0x01
+#define VAL_TPI_QUAN_RANGE_FULL			0x02
+#define VAL_TPI_FORMAT_RGB			0x00
+#define VAL_TPI_FORMAT_YCBCR444			0x01
+#define VAL_TPI_FORMAT_YCBCR422			0x02
+#define VAL_TPI_FORMAT_INTERNAL_RGB		0x03
+#define VAL_TPI_FORMAT(_fmt, _qr) \
+		(VAL_TPI_FORMAT_##_fmt | (VAL_TPI_QUAN_RANGE_##_qr << 2))
+
+/* Input Format, default value: 0x00 */
+#define REG_TPI_INPUT				0x0609
+#define BIT_TPI_INPUT_EXTENDEDBITMODE		BIT(7)
+#define BIT_TPI_INPUT_ENDITHER			BIT(6)
+#define MSK_TPI_INPUT_INPUT_QUAN_RANGE		0x0c
+#define MSK_TPI_INPUT_INPUT_FORMAT		0x03
+
+/* Output Format, default value: 0x00 */
+#define REG_TPI_OUTPUT				0x060a
+#define BIT_TPI_OUTPUT_CSCMODE709		BIT(4)
+#define MSK_TPI_OUTPUT_OUTPUT_QUAN_RANGE	0x0c
+#define MSK_TPI_OUTPUT_OUTPUT_FORMAT		0x03
+
+/* TPI AVI Check Sum, default value: 0x00 */
+#define REG_TPI_AVI_CHSUM			0x060c
+
+/* TPI System Control, default value: 0x00 */
+#define REG_TPI_SC				0x061a
+#define BIT_TPI_SC_TPI_UPDATE_FLG		BIT(7)
+#define BIT_TPI_SC_TPI_REAUTH_CTL		BIT(6)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_1		BIT(5)
+#define BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN	BIT(4)
+#define BIT_TPI_SC_TPI_AV_MUTE			BIT(3)
+#define BIT_TPI_SC_DDC_GPU_REQUEST		BIT(2)
+#define BIT_TPI_SC_DDC_TPI_SW			BIT(1)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI	BIT(0)
+
+/* TPI COPP Query Data, default value: 0x00 */
+#define REG_TPI_COPP_DATA1			0x0629
+#define BIT_TPI_COPP_DATA1_COPP_GPROT		BIT(7)
+#define BIT_TPI_COPP_DATA1_COPP_LPROT		BIT(6)
+#define MSK_TPI_COPP_DATA1_COPP_LINK_STATUS	0x30
+#define VAL_TPI_COPP_LINK_STATUS_NORMAL		0x00
+#define VAL_TPI_COPP_LINK_STATUS_LINK_LOST	0x10
+#define VAL_TPI_COPP_LINK_STATUS_RENEGOTIATION_REQ 0x20
+#define VAL_TPI_COPP_LINK_STATUS_LINK_SUSPENDED	0x30
+#define BIT_TPI_COPP_DATA1_COPP_HDCP_REP	BIT(3)
+#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_0	BIT(2)
+#define BIT_TPI_COPP_DATA1_COPP_PROTYPE		BIT(1)
+#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_1	BIT(0)
+
+/* TPI COPP Control Data, default value: 0x00 */
+#define REG_TPI_COPP_DATA2			0x062a
+#define BIT_TPI_COPP_DATA2_INTR_ENCRYPTION	BIT(5)
+#define BIT_TPI_COPP_DATA2_KSV_FORWARD		BIT(4)
+#define BIT_TPI_COPP_DATA2_INTERM_RI_CHECK_EN	BIT(3)
+#define BIT_TPI_COPP_DATA2_DOUBLE_RI_CHECK	BIT(2)
+#define BIT_TPI_COPP_DATA2_DDC_SHORT_RI_RD	BIT(1)
+#define BIT_TPI_COPP_DATA2_COPP_PROTLEVEL	BIT(0)
+
+/* TPI Interrupt Enable, default value: 0x00 */
+#define REG_TPI_INTR_EN				0x063c
+
+/* TPI Interrupt Status Low Byte, default value: 0x00 */
+#define REG_TPI_INTR_ST0			0x063d
+#define BIT_TPI_INTR_ST0_TPI_AUTH_CHNGE_STAT	BIT(7)
+#define BIT_TPI_INTR_ST0_TPI_V_RDY_STAT		BIT(6)
+#define BIT_TPI_INTR_ST0_TPI_COPP_CHNGE_STAT	BIT(5)
+#define BIT_TPI_INTR_ST0_KSV_FIFO_FIRST_STAT	BIT(3)
+#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_DONE_STAT BIT(2)
+#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_ERR_STAT BIT(1)
+#define BIT_TPI_INTR_ST0_READ_BKSV_ERR_STAT	BIT(0)
+
+/* TPI DS BCAPS Status, default value: 0x00 */
+#define REG_TPI_DS_BCAPS			0x0644
+
+/* TPI BStatus1, default value: 0x00 */
+#define REG_TPI_BSTATUS1			0x0645
+#define BIT_TPI_BSTATUS1_DS_DEV_EXCEED		BIT(7)
+#define MSK_TPI_BSTATUS1_DS_DEV_CNT		0x7f
+
+/* TPI BStatus2, default value: 0x10 */
+#define REG_TPI_BSTATUS2			0x0646
+#define MSK_TPI_BSTATUS2_DS_BSTATUS		0xe0
+#define BIT_TPI_BSTATUS2_DS_HDMI_MODE		BIT(4)
+#define BIT_TPI_BSTATUS2_DS_CASC_EXCEED		BIT(3)
+#define MSK_TPI_BSTATUS2_DS_DEPTH		0x07
+
+/* TPI HW Optimization Control #3, default value: 0x00 */
+#define REG_TPI_HW_OPT3				0x06bb
+#define BIT_TPI_HW_OPT3_DDC_DEBUG		BIT(7)
+#define BIT_TPI_HW_OPT3_RI_CHECK_SKIP		BIT(3)
+#define BIT_TPI_HW_OPT3_TPI_DDC_BURST_MODE	BIT(2)
+#define MSK_TPI_HW_OPT3_TPI_DDC_REQ_LEVEL	0x03
+
+/* TPI Info Frame Select, default value: 0x00 */
+#define REG_TPI_INFO_FSEL			0x06bf
+#define BIT_TPI_INFO_FSEL_TPI_INFO_EN		BIT(7)
+#define BIT_TPI_INFO_FSEL_TPI_INFO_RPT		BIT(6)
+#define BIT_TPI_INFO_FSEL_TPI_INFO_READ_FLAG	BIT(5)
+#define MSK_TPI_INFO_FSEL_TPI_INFO_SEL		0x07
+
+/* TPI Info Byte #0, default value: 0x00 */
+#define REG_TPI_INFO_B0				0x06c0
+
+/* CoC Status, default value: 0x00 */
+#define REG_COC_STAT_0				0x0700
+#define REG_COC_STAT_1				0x0701
+#define REG_COC_STAT_2				0x0702
+#define REG_COC_STAT_3				0x0703
+#define REG_COC_STAT_4				0x0704
+#define REG_COC_STAT_5				0x0705
+
+/* CoC 1st Ctl, default value: 0x40 */
+#define REG_COC_CTL0				0x0710
+
+/* CoC 2nd Ctl, default value: 0x0a */
+#define REG_COC_CTL1				0x0711
+#define MSK_COC_CTL1_COC_CTRL1_7_6		0xc0
+#define MSK_COC_CTL1_COC_CTRL1_5_0		0x3f
+
+/* CoC 3rd Ctl, default value: 0x14 */
+#define REG_COC_CTL2				0x0712
+#define MSK_COC_CTL2_COC_CTRL2_7_6		0xc0
+#define MSK_COC_CTL2_COC_CTRL2_5_0		0x3f
+
+/* CoC 4th Ctl, default value: 0x40 */
+#define REG_COC_CTL3				0x0713
+#define BIT_COC_CTL3_COC_CTRL3_7		BIT(7)
+#define MSK_COC_CTL3_COC_CTRL3_6_0		0x7f
+
+/* CoC 7th Ctl, default value: 0x00 */
+#define REG_COC_CTL6				0x0716
+#define BIT_COC_CTL6_COC_CTRL6_7		BIT(7)
+#define BIT_COC_CTL6_COC_CTRL6_6		BIT(6)
+#define MSK_COC_CTL6_COC_CTRL6_5_0		0x3f
+
+/* CoC 8th Ctl, default value: 0x06 */
+#define REG_COC_CTL7				0x0717
+#define BIT_COC_CTL7_COC_CTRL7_7		BIT(7)
+#define BIT_COC_CTL7_COC_CTRL7_6		BIT(6)
+#define BIT_COC_CTL7_COC_CTRL7_5		BIT(5)
+#define MSK_COC_CTL7_COC_CTRL7_4_3		0x18
+#define MSK_COC_CTL7_COC_CTRL7_2_0		0x07
+
+/* CoC 10th Ctl, default value: 0x00 */
+#define REG_COC_CTL9				0x0719
+
+/* CoC 11th Ctl, default value: 0x00 */
+#define REG_COC_CTLA				0x071a
+
+/* CoC 12th Ctl, default value: 0x00 */
+#define REG_COC_CTLB				0x071b
+
+/* CoC 13th Ctl, default value: 0x0f */
+#define REG_COC_CTLC				0x071c
+
+/* CoC 14th Ctl, default value: 0x0a */
+#define REG_COC_CTLD				0x071d
+#define BIT_COC_CTLD_COC_CTRLD_7		BIT(7)
+#define MSK_COC_CTLD_COC_CTRLD_6_0		0x7f
+
+/* CoC 15th Ctl, default value: 0x0a */
+#define REG_COC_CTLE				0x071e
+#define BIT_COC_CTLE_COC_CTRLE_7		BIT(7)
+#define MSK_COC_CTLE_COC_CTRLE_6_0		0x7f
+
+/* CoC 16th Ctl, default value: 0x00 */
+#define REG_COC_CTLF				0x071f
+#define MSK_COC_CTLF_COC_CTRLF_7_3		0xf8
+#define MSK_COC_CTLF_COC_CTRLF_2_0		0x07
+
+/* CoC 18th Ctl, default value: 0x32 */
+#define REG_COC_CTL11				0x0721
+#define MSK_COC_CTL11_COC_CTRL11_7_4		0xf0
+#define MSK_COC_CTL11_COC_CTRL11_3_0		0x0f
+
+/* CoC 21st Ctl, default value: 0x00 */
+#define REG_COC_CTL14				0x0724
+#define MSK_COC_CTL14_COC_CTRL14_7_4		0xf0
+#define MSK_COC_CTL14_COC_CTRL14_3_0		0x0f
+
+/* CoC 22nd Ctl, default value: 0x00 */
+#define REG_COC_CTL15				0x0725
+#define BIT_COC_CTL15_COC_CTRL15_7		BIT(7)
+#define MSK_COC_CTL15_COC_CTRL15_6_4		0x70
+#define MSK_COC_CTL15_COC_CTRL15_3_0		0x0f
+
+/* CoC Interrupt, default value: 0x00 */
+#define REG_COC_INTR				0x0726
+
+/* CoC Interrupt Mask, default value: 0x00 */
+#define REG_COC_INTR_MASK			0x0727
+#define BIT_COC_PLL_LOCK_STATUS_CHANGE		BIT(0)
+#define BIT_COC_CALIBRATION_DONE		BIT(1)
+
+/* CoC Misc Ctl, default value: 0x00 */
+#define REG_COC_MISC_CTL0			0x0728
+#define BIT_COC_MISC_CTL0_FSM_MON		BIT(7)
+
+/* CoC 24th Ctl, default value: 0x00 */
+#define REG_COC_CTL17				0x072a
+#define MSK_COC_CTL17_COC_CTRL17_7_4		0xf0
+#define MSK_COC_CTL17_COC_CTRL17_3_0		0x0f
+
+/* CoC 25th Ctl, default value: 0x00 */
+#define REG_COC_CTL18				0x072b
+#define MSK_COC_CTL18_COC_CTRL18_7_4		0xf0
+#define MSK_COC_CTL18_COC_CTRL18_3_0		0x0f
+
+/* CoC 26th Ctl, default value: 0x00 */
+#define REG_COC_CTL19				0x072c
+#define MSK_COC_CTL19_COC_CTRL19_7_4		0xf0
+#define MSK_COC_CTL19_COC_CTRL19_3_0		0x0f
+
+/* CoC 27th Ctl, default value: 0x00 */
+#define REG_COC_CTL1A				0x072d
+#define MSK_COC_CTL1A_COC_CTRL1A_7_2		0xfc
+#define MSK_COC_CTL1A_COC_CTRL1A_1_0		0x03
+
+/* DoC 9th Status, default value: 0x00 */
+#define REG_DOC_STAT_8				0x0740
+
+/* DoC 10th Status, default value: 0x00 */
+#define REG_DOC_STAT_9				0x0741
+
+/* DoC 5th CFG, default value: 0x00 */
+#define REG_DOC_CFG4				0x074e
+#define MSK_DOC_CFG4_DBG_STATE_DOC_FSM		0x0f
+
+/* DoC 1st Ctl, default value: 0x40 */
+#define REG_DOC_CTL0				0x0751
+
+/* DoC 7th Ctl, default value: 0x00 */
+#define REG_DOC_CTL6				0x0757
+#define BIT_DOC_CTL6_DOC_CTRL6_7		BIT(7)
+#define BIT_DOC_CTL6_DOC_CTRL6_6		BIT(6)
+#define MSK_DOC_CTL6_DOC_CTRL6_5_4		0x30
+#define MSK_DOC_CTL6_DOC_CTRL6_3_0		0x0f
+
+/* DoC 8th Ctl, default value: 0x00 */
+#define REG_DOC_CTL7				0x0758
+#define BIT_DOC_CTL7_DOC_CTRL7_7		BIT(7)
+#define BIT_DOC_CTL7_DOC_CTRL7_6		BIT(6)
+#define BIT_DOC_CTL7_DOC_CTRL7_5		BIT(5)
+#define MSK_DOC_CTL7_DOC_CTRL7_4_3		0x18
+#define MSK_DOC_CTL7_DOC_CTRL7_2_0		0x07
+
+/* DoC 9th Ctl, default value: 0x00 */
+#define REG_DOC_CTL8				0x076c
+#define BIT_DOC_CTL8_DOC_CTRL8_7		BIT(7)
+#define MSK_DOC_CTL8_DOC_CTRL8_6_4		0x70
+#define MSK_DOC_CTL8_DOC_CTRL8_3_2		0x0c
+#define MSK_DOC_CTL8_DOC_CTRL8_1_0		0x03
+
+/* DoC 10th Ctl, default value: 0x00 */
+#define REG_DOC_CTL9				0x076d
+
+/* DoC 11th Ctl, default value: 0x00 */
+#define REG_DOC_CTLA				0x076e
+
+/* DoC 15th Ctl, default value: 0x00 */
+#define REG_DOC_CTLE				0x0772
+#define BIT_DOC_CTLE_DOC_CTRLE_7		BIT(7)
+#define BIT_DOC_CTLE_DOC_CTRLE_6		BIT(6)
+#define MSK_DOC_CTLE_DOC_CTRLE_5_4		0x30
+#define MSK_DOC_CTLE_DOC_CTRLE_3_0		0x0f
+
+/* Interrupt Mask 1st, default value: 0x00 */
+#define REG_MHL_INT_0_MASK			0x0580
+
+/* Interrupt Mask 2nd, default value: 0x00 */
+#define REG_MHL_INT_1_MASK			0x0581
+
+/* Interrupt Mask 3rd, default value: 0x00 */
+#define REG_MHL_INT_2_MASK			0x0582
+
+/* Interrupt Mask 4th, default value: 0x00 */
+#define REG_MHL_INT_3_MASK			0x0583
+
+/* MDT Receive Time Out, default value: 0x00 */
+#define REG_MDT_RCV_TIMEOUT			0x0584
+
+/* MDT Transmit Time Out, default value: 0x00 */
+#define REG_MDT_XMIT_TIMEOUT			0x0585
+
+/* MDT Receive Control, default value: 0x00 */
+#define REG_MDT_RCV_CTRL			0x0586
+#define BIT_MDT_RCV_CTRL_MDT_RCV_EN		BIT(7)
+#define BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN	BIT(6)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_OVER_WR_EN	BIT(4)
+#define BIT_MDT_RCV_CTRL_MDT_XFIFO_OVER_WR_EN	BIT(3)
+#define BIT_MDT_RCV_CTRL_MDT_DISABLE		BIT(2)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_ALL	BIT(1)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR	BIT(0)
+
+/* MDT Receive Read Port, default value: 0x00 */
+#define REG_MDT_RCV_READ_PORT			0x0587
+
+/* MDT Transmit Control, default value: 0x70 */
+#define REG_MDT_XMIT_CTRL			0x0588
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_EN		BIT(7)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_CMD_MERGE_EN	BIT(6)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_BURST_LEN BIT(5)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_AID	BIT(4)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_SINGLE_RUN_EN BIT(3)
+#define BIT_MDT_XMIT_CTRL_MDT_CLR_ABORT_WAIT	BIT(2)
+#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_ALL	BIT(1)
+#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_CUR	BIT(0)
+
+/* MDT Receive WRITE Port, default value: 0x00 */
+#define REG_MDT_XMIT_WRITE_PORT			0x0589
+
+/* MDT RFIFO Status, default value: 0x00 */
+#define REG_MDT_RFIFO_STAT			0x058a
+#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CNT	0xe0
+#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CUR_BYTE_CNT 0x1f
+
+/* MDT XFIFO Status, default value: 0x80 */
+#define REG_MDT_XFIFO_STAT			0x058b
+#define MSK_MDT_XFIFO_STAT_MDT_XFIFO_LEVEL_AVAIL 0xe0
+#define BIT_MDT_XFIFO_STAT_MDT_XMIT_PRE_HS_EN	BIT(4)
+#define MSK_MDT_XFIFO_STAT_MDT_WRITE_BURST_LEN	0x0f
+
+/* MDT Interrupt 0, default value: 0x0c */
+#define REG_MDT_INT_0				0x058c
+#define BIT_MDT_RFIFO_DATA_RDY			BIT(0)
+#define BIT_MDT_IDLE_AFTER_HAWB_DISABLE		BIT(2)
+#define BIT_MDT_XFIFO_EMPTY			BIT(3)
+
+/* MDT Interrupt 0 Mask, default value: 0x00 */
+#define REG_MDT_INT_0_MASK			0x058d
+
+/* MDT Interrupt 1, default value: 0x00 */
+#define REG_MDT_INT_1				0x058e
+#define BIT_MDT_RCV_TIMEOUT			BIT(0)
+#define BIT_MDT_RCV_SM_ABORT_PKT_RCVD		BIT(1)
+#define BIT_MDT_RCV_SM_ERROR			BIT(2)
+#define BIT_MDT_XMIT_TIMEOUT			BIT(5)
+#define BIT_MDT_XMIT_SM_ABORT_PKT_RCVD		BIT(6)
+#define BIT_MDT_XMIT_SM_ERROR			BIT(7)
+
+/* MDT Interrupt 1 Mask, default value: 0x00 */
+#define REG_MDT_INT_1_MASK			0x058f
+
+/* CBUS Vendor ID, default value: 0x01 */
+#define REG_CBUS_VENDOR_ID			0x0590
+
+/* CBUS Connection Status, default value: 0x00 */
+#define REG_CBUS_STATUS				0x0591
+#define BIT_CBUS_STATUS_MHL_CABLE_PRESENT	BIT(4)
+#define BIT_CBUS_STATUS_MSC_HB_SUCCESS		BIT(3)
+#define BIT_CBUS_STATUS_CBUS_HPD		BIT(2)
+#define BIT_CBUS_STATUS_MHL_MODE		BIT(1)
+#define BIT_CBUS_STATUS_CBUS_CONNECTED		BIT(0)
+
+/* CBUS Interrupt 1st, default value: 0x00 */
+#define REG_CBUS_INT_0				0x0592
+#define BIT_CBUS_MSC_MT_DONE_NACK		BIT(7)
+#define BIT_CBUS_MSC_MR_SET_INT			BIT(6)
+#define BIT_CBUS_MSC_MR_WRITE_BURST		BIT(5)
+#define BIT_CBUS_MSC_MR_MSC_MSG			BIT(4)
+#define BIT_CBUS_MSC_MR_WRITE_STAT		BIT(3)
+#define BIT_CBUS_HPD_CHG			BIT(2)
+#define BIT_CBUS_MSC_MT_DONE			BIT(1)
+#define BIT_CBUS_CNX_CHG			BIT(0)
+
+/* CBUS Interrupt Mask 1st, default value: 0x00 */
+#define REG_CBUS_INT_0_MASK			0x0593
+
+/* CBUS Interrupt 2nd, default value: 0x00 */
+#define REG_CBUS_INT_1				0x0594
+#define BIT_CBUS_CMD_ABORT			BIT(6)
+#define BIT_CBUS_MSC_ABORT_RCVD			BIT(3)
+#define BIT_CBUS_DDC_ABORT			BIT(2)
+#define BIT_CBUS_CEC_ABORT			BIT(1)
+
+/* CBUS Interrupt Mask 2nd, default value: 0x00 */
+#define REG_CBUS_INT_1_MASK			0x0595
+
+/* CBUS DDC Abort Interrupt, default value: 0x00 */
+#define REG_DDC_ABORT_INT			0x0598
+
+/* CBUS DDC Abort Interrupt Mask, default value: 0x00 */
+#define REG_DDC_ABORT_INT_MASK			0x0599
+
+/* CBUS MSC Requester Abort Interrupt, default value: 0x00 */
+#define REG_MSC_MT_ABORT_INT			0x059a
+
+/* CBUS MSC Requester Abort Interrupt Mask, default value: 0x00 */
+#define REG_MSC_MT_ABORT_INT_MASK		0x059b
+
+/* CBUS MSC Responder Abort Interrupt, default value: 0x00 */
+#define REG_MSC_MR_ABORT_INT			0x059c
+
+/* CBUS MSC Responder Abort Interrupt Mask, default value: 0x00 */
+#define REG_MSC_MR_ABORT_INT_MASK		0x059d
+
+/* CBUS RX DISCOVERY interrupt, default value: 0x00 */
+#define REG_CBUS_RX_DISC_INT0			0x059e
+
+/* CBUS RX DISCOVERY Interrupt Mask, default value: 0x00 */
+#define REG_CBUS_RX_DISC_INT0_MASK		0x059f
+
+/* CBUS_Link_Layer Control #8, default value: 0x00 */
+#define REG_CBUS_LINK_CTRL_8			0x05a7
+
+/* MDT State Machine Status, default value: 0x00 */
+#define REG_MDT_SM_STAT				0x05b5
+#define MSK_MDT_SM_STAT_MDT_RCV_STATE		0xf0
+#define MSK_MDT_SM_STAT_MDT_XMIT_STATE		0x0f
+
+/* CBUS MSC command trigger, default value: 0x00 */
+#define REG_MSC_COMMAND_START			0x05b8
+#define BIT_MSC_COMMAND_START_DEBUG		BIT(5)
+#define BIT_MSC_COMMAND_START_WRITE_BURST	BIT(4)
+#define BIT_MSC_COMMAND_START_WRITE_STAT	BIT(3)
+#define BIT_MSC_COMMAND_START_READ_DEVCAP	BIT(2)
+#define BIT_MSC_COMMAND_START_MSC_MSG		BIT(1)
+#define BIT_MSC_COMMAND_START_PEER		BIT(0)
+
+/* CBUS MSC Command/Offset, default value: 0x00 */
+#define REG_MSC_CMD_OR_OFFSET			0x05b9
+
+/* CBUS MSC Transmit Data */
+#define REG_MSC_1ST_TRANSMIT_DATA		0x05ba
+#define REG_MSC_2ND_TRANSMIT_DATA		0x05bb
+
+/* CBUS MSC Requester Received Data */
+#define REG_MSC_MT_RCVD_DATA0			0x05bc
+#define REG_MSC_MT_RCVD_DATA1			0x05bd
+
+/* CBUS MSC Responder MSC_MSG Received Data */
+#define REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA	0x05bf
+#define REG_MSC_MR_MSC_MSG_RCVD_2ND_DATA	0x05c0
+
+/* CBUS MSC Heartbeat Control, default value: 0x27 */
+#define REG_MSC_HEARTBEAT_CTRL			0x05c4
+#define BIT_MSC_HEARTBEAT_CTRL_MSC_HB_EN	BIT(7)
+#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_FAIL_LIMIT 0x70
+#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_PERIOD_MSB 0x0f
+
+/* CBUS MSC Compatibility Control, default value: 0x02 */
+#define REG_CBUS_MSC_COMPAT_CTRL		0x05c7
+#define BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN	BIT(7)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_MSC_ON_CBUS BIT(6)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_DDC_ON_CBUS BIT(5)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_DDC_ERRORCODE BIT(3)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_VS1_ERRORCODE BIT(2)
+
+/* CBUS3 Converter Control, default value: 0x24 */
+#define REG_CBUS3_CNVT				0x05dc
+#define MSK_CBUS3_CNVT_CBUS3_RETRYLMT		0xf0
+#define MSK_CBUS3_CNVT_CBUS3_PEERTOUT_SEL	0x0c
+#define BIT_CBUS3_CNVT_TEARCBUS_EN		BIT(1)
+#define BIT_CBUS3_CNVT_CBUS3CNVT_EN		BIT(0)
+
+/* Discovery Control1, default value: 0x24 */
+#define REG_DISC_CTRL1				0x05e0
+#define BIT_DISC_CTRL1_CBUS_INTR_EN		BIT(7)
+#define BIT_DISC_CTRL1_HB_ONLY			BIT(6)
+#define MSK_DISC_CTRL1_DISC_ATT			0x30
+#define MSK_DISC_CTRL1_DISC_CYC			0x0c
+#define BIT_DISC_CTRL1_DISC_EN			BIT(0)
+
+#define VAL_PUP_OFF				0
+#define VAL_PUP_20K				1
+#define VAL_PUP_5K				2
+
+/* Discovery Control4, default value: 0x80 */
+#define REG_DISC_CTRL4				0x05e3
+#define MSK_DISC_CTRL4_CBUSDISC_PUP_SEL		0xc0
+#define MSK_DISC_CTRL4_CBUSIDLE_PUP_SEL		0x30
+#define VAL_DISC_CTRL4(pup_disc, pup_idle) (((pup_disc) << 6) | (pup_idle << 4))
+
+/* Discovery Control5, default value: 0x03 */
+#define REG_DISC_CTRL5				0x05e4
+#define BIT_DISC_CTRL5_DSM_OVRIDE		BIT(3)
+#define MSK_DISC_CTRL5_CBUSMHL_PUP_SEL		0x03
+
+/* Discovery Control8, default value: 0x81 */
+#define REG_DISC_CTRL8				0x05e7
+#define BIT_DISC_CTRL8_NOMHLINT_CLR_BYPASS	BIT(7)
+#define BIT_DISC_CTRL8_DELAY_CBUS_INTR_EN	BIT(0)
+
+/* Discovery Control9, default value: 0x54 */
+#define REG_DISC_CTRL9			0x05e8
+#define BIT_DISC_CTRL9_MHL3_RSEN_BYP		BIT(7)
+#define BIT_DISC_CTRL9_MHL3DISC_EN		BIT(6)
+#define BIT_DISC_CTRL9_WAKE_DRVFLT		BIT(4)
+#define BIT_DISC_CTRL9_NOMHL_EST		BIT(3)
+#define BIT_DISC_CTRL9_DISC_PULSE_PROCEED	BIT(2)
+#define BIT_DISC_CTRL9_WAKE_PULSE_BYPASS	BIT(1)
+#define BIT_DISC_CTRL9_VBUS_OUTPUT_CAPABILITY_SRC BIT(0)
+
+/* Discovery Status1, default value: 0x00 */
+#define REG_DISC_STAT1				0x05eb
+#define BIT_DISC_STAT1_PSM_OVRIDE		BIT(5)
+#define MSK_DISC_STAT1_DISC_SM			0x0f
+
+/* Discovery Status2, default value: 0x00 */
+#define REG_DISC_STAT2				0x05ec
+#define BIT_DISC_STAT2_CBUS_OE_POL		BIT(6)
+#define BIT_DISC_STAT2_CBUS_SATUS		BIT(5)
+#define BIT_DISC_STAT2_RSEN			BIT(4)
+
+#define MSK_DISC_STAT2_MHL_VRSN			0x0c
+#define VAL_DISC_STAT2_DEFAULT			0x00
+#define VAL_DISC_STAT2_MHL1_2			0x04
+#define VAL_DISC_STAT2_MHL3			0x08
+#define VAL_DISC_STAT2_RESERVED			0x0c
+
+#define MSK_DISC_STAT2_RGND			0x03
+#define VAL_RGND_OPEN				0x00
+#define VAL_RGND_2K				0x01
+#define VAL_RGND_1K				0x02
+#define VAL_RGND_SHORT				0x03
+
+/* Interrupt CBUS_reg1 INTR0, default value: 0x00 */
+#define REG_CBUS_DISC_INTR0			0x05ed
+#define BIT_RGND_READY_INT			BIT(6)
+#define BIT_CBUS_MHL12_DISCON_INT		BIT(5)
+#define BIT_CBUS_MHL3_DISCON_INT		BIT(4)
+#define BIT_NOT_MHL_EST_INT			BIT(3)
+#define BIT_MHL_EST_INT				BIT(2)
+#define BIT_MHL3_EST_INT			BIT(1)
+#define VAL_CBUS_MHL_DISCON (BIT_CBUS_MHL12_DISCON_INT \
+			    | BIT_CBUS_MHL3_DISCON_INT \
+			    | BIT_NOT_MHL_EST_INT)
+
+/* Interrupt CBUS_reg1 INTR0 Mask, default value: 0x00 */
+#define REG_CBUS_DISC_INTR0_MASK		0x05ee
+
+#endif /* __SIL_SII8620_H__ */