Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

5 files changed, 131 insertions, 143 deletions

diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c
index 751454ae3cd1..e59907e68854 100644
--- a/drivers/gpu/drm/mcde/mcde_display.c
+++ b/drivers/gpu/drm/mcde/mcde_display.c
@@ -498,24 +498,20 @@ static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch,
 	}
 
 	/* Set up channel 0 sync (based on chnl_update_registers()) */
-	if (mcde->te_sync) {
-		/*
-		 * Turn on hardware TE0 synchronization
-		 */
+	if (mcde->video_mode || mcde->te_sync)
 		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
 			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
-		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0
-			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
-	} else {
-		/*
-		 * Set up sync source to software, out sync formatter
-		 * Code mostly from mcde_hw.c chnl_update_registers()
-		 */
+	else
 		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SOFTWARE
 			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
+
+	if (mcde->te_sync)
+		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0
+			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
+	else
 		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER
 			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
-	}
+
 	writel(val, mcde->regs + sync);
 
 	/* Set up pixels per line and lines per frame */
@@ -934,10 +930,17 @@ static void mcde_display_enable(struct drm_simple_display_pipe *pipe,
 		val = readl(mcde->regs + MCDE_CRC);
 		val |= MCDE_CRC_SYCEN0;
 		writel(val, mcde->regs + MCDE_CRC);
-
-		drm_crtc_vblank_on(crtc);
 	}
 
+	drm_crtc_vblank_on(crtc);
+
+	if (mcde->video_mode)
+		/*
+		 * Keep FIFO permanently enabled in video mode,
+		 * otherwise MCDE will stop feeding data to the panel.
+		 */
+		mcde_enable_fifo(mcde, MCDE_FIFO_A);
+
 	dev_info(drm->dev, "MCDE display is enabled\n");
 }
 
@@ -946,13 +949,22 @@ static void mcde_display_disable(struct drm_simple_display_pipe *pipe)
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *drm = crtc->dev;
 	struct mcde *mcde = drm->dev_private;
+	struct drm_pending_vblank_event *event;
 
-	if (mcde->te_sync)
-		drm_crtc_vblank_off(crtc);
+	drm_crtc_vblank_off(crtc);
 
 	/* Disable FIFO A flow */
 	mcde_disable_fifo(mcde, MCDE_FIFO_A, true);
 
+	event = crtc->state->event;
+	if (event) {
+		crtc->state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+
 	dev_info(drm->dev, "MCDE display is disabled\n");
 }
 
@@ -1048,8 +1060,9 @@ static void mcde_display_update(struct drm_simple_display_pipe *pipe,
 	 */
 	if (fb) {
 		mcde_set_extsrc(mcde, drm_fb_cma_get_gem_addr(fb, pstate, 0));
-		/* Send a single frame using software sync */
-		mcde_display_send_one_frame(mcde);
+		if (!mcde->video_mode)
+			/* Send a single frame using software sync */
+			mcde_display_send_one_frame(mcde);
 		dev_info_once(mcde->dev, "sent first display update\n");
 	} else {
 		/*
@@ -1097,6 +1110,8 @@ static struct drm_simple_display_pipe_funcs mcde_display_funcs = {
 	.enable = mcde_display_enable,
 	.disable = mcde_display_disable,
 	.update = mcde_display_update,
+	.enable_vblank = mcde_display_enable_vblank,
+	.disable_vblank = mcde_display_disable_vblank,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 
@@ -1123,12 +1138,6 @@ int mcde_display_init(struct drm_device *drm)
 		DRM_FORMAT_YUV422,
 	};
 
-	/* Provide vblank only when we have TE enabled */
-	if (mcde->te_sync) {
-		mcde_display_funcs.enable_vblank = mcde_display_enable_vblank;
-		mcde_display_funcs.disable_vblank = mcde_display_disable_vblank;
-	}
-
 	ret = drm_simple_display_pipe_init(drm, &mcde->pipe,
 					   &mcde_display_funcs,
 					   formats, ARRAY_SIZE(formats),
diff --git a/drivers/gpu/drm/mcde/mcde_drm.h b/drivers/gpu/drm/mcde/mcde_drm.h
index dab4db021231..80edd6628979 100644
--- a/drivers/gpu/drm/mcde/mcde_drm.h
+++ b/drivers/gpu/drm/mcde/mcde_drm.h
@@ -19,6 +19,7 @@ struct mcde {
 	struct mipi_dsi_device *mdsi;
 	s16 stride;
 	bool te_sync;
+	bool video_mode;
 	bool oneshot_mode;
 	unsigned int flow_active;
 	spinlock_t flow_lock; /* Locks the channel flow control */
diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index 5649887d2b90..9008ddcfc528 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -179,18 +179,10 @@ static int mcde_modeset_init(struct drm_device *drm)
 	mode_config->min_height = 1;
 	mode_config->max_height = 1080;
 
-	/*
-	 * Currently we only support vblank handling on the DSI bridge, using
-	 * TE synchronization. If TE sync is not set up, it is still possible
-	 * to push out a single update on demand, but this is hard for DRM to
-	 * exploit.
-	 */
-	if (mcde->te_sync) {
-		ret = drm_vblank_init(drm, 1);
-		if (ret) {
-			dev_err(drm->dev, "failed to init vblank\n");
-			goto out_config;
-		}
+	ret = drm_vblank_init(drm, 1);
+	if (ret) {
+		dev_err(drm->dev, "failed to init vblank\n");
+		goto out_config;
 	}
 
 	ret = mcde_display_init(drm);
@@ -339,8 +331,6 @@ static int mcde_probe(struct platform_device *pdev)
 	drm->dev_private = mcde;
 	platform_set_drvdata(pdev, drm);
 
-	/* Enable use of the TE signal and interrupt */
-	mcde->te_sync = true;
 	/* Enable continuous updates: this is what Linux' framebuffer expects */
 	mcde->oneshot_mode = false;
 	drm->dev_private = mcde;
diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c
index ef4c630afe3f..d76106743f84 100644
--- a/drivers/gpu/drm/mcde/mcde_dsi.c
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -39,7 +39,6 @@ struct mcde_dsi {
 	struct device *dev;
 	struct mcde *mcde;
 	struct drm_bridge bridge;
-	struct drm_connector connector;
 	struct drm_panel *panel;
 	struct drm_bridge *bridge_out;
 	struct mipi_dsi_host dsi_host;
@@ -64,11 +63,6 @@ static inline struct mcde_dsi *host_to_mcde_dsi(struct mipi_dsi_host *h)
 	return container_of(h, struct mcde_dsi, dsi_host);
 }
 
-static inline struct mcde_dsi *connector_to_mcde_dsi(struct drm_connector *c)
-{
-	return container_of(c, struct mcde_dsi, connector);
-}
-
 bool mcde_dsi_irq(struct mipi_dsi_device *mdsi)
 {
 	struct mcde_dsi *d;
@@ -124,12 +118,41 @@ bool mcde_dsi_irq(struct mipi_dsi_device *mdsi)
 
 	val = readl(d->regs + DSI_VID_MODE_STS_FLAG);
 	if (val)
-		dev_err(d->dev, "some video mode error status\n");
+		dev_dbg(d->dev, "DSI_VID_MODE_STS_FLAG = %08x\n", val);
+	if (val & DSI_VID_MODE_STS_VSG_RUNNING)
+		dev_dbg(d->dev, "VID mode VSG running\n");
+	if (val & DSI_VID_MODE_STS_ERR_MISSING_DATA)
+		dev_err(d->dev, "VID mode missing data\n");
+	if (val & DSI_VID_MODE_STS_ERR_MISSING_HSYNC)
+		dev_err(d->dev, "VID mode missing HSYNC\n");
+	if (val & DSI_VID_MODE_STS_ERR_MISSING_VSYNC)
+		dev_err(d->dev, "VID mode missing VSYNC\n");
+	if (val & DSI_VID_MODE_STS_REG_ERR_SMALL_LENGTH)
+		dev_err(d->dev, "VID mode less bytes than expected between two HSYNC\n");
+	if (val & DSI_VID_MODE_STS_REG_ERR_SMALL_HEIGHT)
+		dev_err(d->dev, "VID mode less lines than expected between two VSYNC\n");
+	if (val & (DSI_VID_MODE_STS_ERR_BURSTWRITE |
+		   DSI_VID_MODE_STS_ERR_LINEWRITE |
+		   DSI_VID_MODE_STS_ERR_LONGREAD))
+		dev_err(d->dev, "VID mode read/write error\n");
+	if (val & DSI_VID_MODE_STS_ERR_VRS_WRONG_LENGTH)
+		dev_err(d->dev, "VID mode received packets differ from expected size\n");
+	if (val & DSI_VID_MODE_STS_VSG_RECOVERY)
+		dev_err(d->dev, "VID mode VSG in recovery mode\n");
 	writel(val, d->regs + DSI_VID_MODE_STS_CLR);
 
 	return te_received;
 }
 
+static void mcde_dsi_attach_to_mcde(struct mcde_dsi *d)
+{
+	d->mcde->mdsi = d->mdsi;
+
+	d->mcde->video_mode = !!(d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO);
+	/* Enable use of the TE signal for all command mode panels */
+	d->mcde->te_sync = !d->mcde->video_mode;
+}
+
 static int mcde_dsi_host_attach(struct mipi_dsi_host *host,
 				struct mipi_dsi_device *mdsi)
 {
@@ -148,7 +171,7 @@ static int mcde_dsi_host_attach(struct mipi_dsi_host *host,
 
 	d->mdsi = mdsi;
 	if (d->mcde)
-		d->mcde->mdsi = mdsi;
+		mcde_dsi_attach_to_mcde(d);
 
 	return 0;
 }
@@ -223,25 +246,25 @@ static ssize_t mcde_dsi_host_transfer(struct mipi_dsi_host *host,
 	if (txlen > 0) {
 		val = 0;
 		for (i = 0; i < 4 && i < txlen; i++)
-			val |= tx[i] << (i & 3) * 8;
+			val |= tx[i] << (i * 8);
 	}
 	writel(val, d->regs + DSI_DIRECT_CMD_WRDAT0);
 	if (txlen > 4) {
 		val = 0;
 		for (i = 0; i < 4 && (i + 4) < txlen; i++)
-			val |= tx[i + 4] << (i & 3) * 8;
+			val |= tx[i + 4] << (i * 8);
 		writel(val, d->regs + DSI_DIRECT_CMD_WRDAT1);
 	}
 	if (txlen > 8) {
 		val = 0;
 		for (i = 0; i < 4 && (i + 8) < txlen; i++)
-			val |= tx[i + 8] << (i & 3) * 8;
+			val |= tx[i + 8] << (i * 8);
 		writel(val, d->regs + DSI_DIRECT_CMD_WRDAT2);
 	}
 	if (txlen > 12) {
 		val = 0;
 		for (i = 0; i < 4 && (i + 12) < txlen; i++)
-			val |= tx[i + 12] << (i & 3) * 8;
+			val |= tx[i + 12] << (i * 8);
 		writel(val, d->regs + DSI_DIRECT_CMD_WRDAT3);
 	}
 
@@ -336,7 +359,7 @@ void mcde_dsi_te_request(struct mipi_dsi_device *mdsi)
 	val |= 0 << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_ID_SHIFT;
 	val |= 2 << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_SIZE_SHIFT;
 	val |= DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LP_EN;
-	val |= DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_DCS_SHORT_WRITE_1 <<
+	val |= MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM <<
 		DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SHIFT;
 	writel(val, d->regs + DSI_DIRECT_CMD_MAIN_SETTINGS);
 
@@ -539,26 +562,6 @@ static void mcde_dsi_setup_video_mode(struct mcde_dsi *d,
 		DSI_VID_VCA_SETTING2_EXACT_BURST_LIMIT_SHIFT;
 	writel(val, d->regs + DSI_VID_VCA_SETTING2);
 
-	/* Put IF1 into video mode */
-	val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
-	val |= DSI_MCTL_MAIN_DATA_CTL_IF1_MODE;
-	writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
-
-	/* Disable command mode on IF1 */
-	val = readl(d->regs + DSI_CMD_MODE_CTL);
-	val &= ~DSI_CMD_MODE_CTL_IF1_LP_EN;
-	writel(val, d->regs + DSI_CMD_MODE_CTL);
-
-	/* Enable some error interrupts */
-	val = readl(d->regs + DSI_VID_MODE_STS_CTL);
-	val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_VSYNC;
-	val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_DATA;
-	writel(val, d->regs + DSI_VID_MODE_STS_CTL);
-
-	/* Enable video mode */
-	val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
-	val |= DSI_MCTL_MAIN_DATA_CTL_VID_EN;
-	writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
 }
 
 static void mcde_dsi_start(struct mcde_dsi *d)
@@ -670,30 +673,25 @@ static void mcde_dsi_start(struct mcde_dsi *d)
 static void mcde_dsi_bridge_enable(struct drm_bridge *bridge)
 {
 	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
+	u32 val;
+
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		/* Enable video mode */
+		val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
+		val |= DSI_MCTL_MAIN_DATA_CTL_VID_EN;
+		writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
+	}
 
 	dev_info(d->dev, "enable DSI master\n");
 };
 
-static void mcde_dsi_bridge_mode_set(struct drm_bridge *bridge,
-				     const struct drm_display_mode *mode,
-				     const struct drm_display_mode *adj)
+static void mcde_dsi_bridge_pre_enable(struct drm_bridge *bridge)
 {
 	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
-	unsigned long pixel_clock_hz = mode->clock * 1000;
 	unsigned long hs_freq, lp_freq;
 	u32 val;
 	int ret;
 
-	if (!d->mdsi) {
-		dev_err(d->dev, "no DSI device attached to encoder!\n");
-		return;
-	}
-
-	dev_info(d->dev, "set DSI master to %dx%d %lu Hz %s mode\n",
-		 mode->hdisplay, mode->vdisplay, pixel_clock_hz,
-		 (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ? "VIDEO" : "CMD"
-		);
-
 	/* Copy maximum clock frequencies */
 	if (d->mdsi->lp_rate)
 		lp_freq = d->mdsi->lp_rate;
@@ -732,7 +730,21 @@ static void mcde_dsi_bridge_mode_set(struct drm_bridge *bridge,
 			 d->hs_freq);
 
 	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-		mcde_dsi_setup_video_mode(d, mode);
+		/* Put IF1 into video mode */
+		val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
+		val |= DSI_MCTL_MAIN_DATA_CTL_IF1_MODE;
+		writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
+
+		/* Disable command mode on IF1 */
+		val = readl(d->regs + DSI_CMD_MODE_CTL);
+		val &= ~DSI_CMD_MODE_CTL_IF1_LP_EN;
+		writel(val, d->regs + DSI_CMD_MODE_CTL);
+
+		/* Enable some error interrupts */
+		val = readl(d->regs + DSI_VID_MODE_STS_CTL);
+		val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_VSYNC;
+		val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_DATA;
+		writel(val, d->regs + DSI_VID_MODE_STS_CTL);
 	} else {
 		/* Command mode, clear IF1 ID */
 		val = readl(d->regs + DSI_CMD_MODE_CTL);
@@ -746,6 +758,26 @@ static void mcde_dsi_bridge_mode_set(struct drm_bridge *bridge,
 	}
 }
 
+static void mcde_dsi_bridge_mode_set(struct drm_bridge *bridge,
+				     const struct drm_display_mode *mode,
+				     const struct drm_display_mode *adj)
+{
+	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
+
+	if (!d->mdsi) {
+		dev_err(d->dev, "no DSI device attached to encoder!\n");
+		return;
+	}
+
+	dev_info(d->dev, "set DSI master to %dx%d %u Hz %s mode\n",
+		 mode->hdisplay, mode->vdisplay, mode->clock * 1000,
+		 (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ? "VIDEO" : "CMD"
+		);
+
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO)
+		mcde_dsi_setup_video_mode(d, mode);
+}
+
 static void mcde_dsi_wait_for_command_mode_stop(struct mcde_dsi *d)
 {
 	u32 val;
@@ -811,67 +843,23 @@ static void mcde_dsi_bridge_disable(struct drm_bridge *bridge)
 	clk_disable_unprepare(d->lp_clk);
 }
 
-/*
- * This connector needs no special handling, just use the default
- * helpers for everything. It's pretty dummy.
- */
-static const struct drm_connector_funcs mcde_dsi_connector_funcs = {
-	.reset = drm_atomic_helper_connector_reset,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = drm_connector_cleanup,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static int mcde_dsi_get_modes(struct drm_connector *connector)
-{
-	struct mcde_dsi *d = connector_to_mcde_dsi(connector);
-
-	/* Just pass the question to the panel */
-	if (d->panel)
-		return drm_panel_get_modes(d->panel);
-
-	/* TODO: deal with bridges */
-
-	return 0;
-}
-
-static const struct drm_connector_helper_funcs
-mcde_dsi_connector_helper_funcs = {
-	.get_modes = mcde_dsi_get_modes,
-};
-
 static int mcde_dsi_bridge_attach(struct drm_bridge *bridge)
 {
 	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
 	struct drm_device *drm = bridge->dev;
 	int ret;
 
-	drm_connector_helper_add(&d->connector,
-				 &mcde_dsi_connector_helper_funcs);
-
 	if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
 		dev_err(d->dev, "we need atomic updates\n");
 		return -ENOTSUPP;
 	}
 
-	ret = drm_connector_init(drm, &d->connector,
-				 &mcde_dsi_connector_funcs,
-				 DRM_MODE_CONNECTOR_DSI);
-	if (ret) {
-		dev_err(d->dev, "failed to initialize DSI bridge connector\n");
-		return ret;
-	}
-	d->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
-	/* The encoder in the bridge attached to the DSI bridge */
-	drm_connector_attach_encoder(&d->connector, bridge->encoder);
-	/* Then we attach the DSI bridge to the output (panel etc) bridge */
+	/* Attach the DSI bridge to the output (panel etc) bridge */
 	ret = drm_bridge_attach(bridge->encoder, d->bridge_out, bridge);
 	if (ret) {
 		dev_err(d->dev, "failed to attach the DSI bridge\n");
 		return ret;
 	}
-	d->connector.status = connector_status_connected;
 
 	return 0;
 }
@@ -881,6 +869,7 @@ static const struct drm_bridge_funcs mcde_dsi_bridge_funcs = {
 	.mode_set = mcde_dsi_bridge_mode_set,
 	.disable = mcde_dsi_bridge_disable,
 	.enable = mcde_dsi_bridge_enable,
+	.pre_enable = mcde_dsi_bridge_pre_enable,
 };
 
 static int mcde_dsi_bind(struct device *dev, struct device *master,
@@ -901,7 +890,7 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 	d->mcde = mcde;
 	/* If the display attached before binding, set this up */
 	if (d->mdsi)
-		d->mcde->mdsi = d->mdsi;
+		mcde_dsi_attach_to_mcde(d);
 
 	/* Obtain the clocks */
 	d->hs_clk = devm_clk_get(dev, "hs");
diff --git a/drivers/gpu/drm/mcde/mcde_dsi_regs.h b/drivers/gpu/drm/mcde/mcde_dsi_regs.h
index c9253321a3be..8089db805c57 100644
--- a/drivers/gpu/drm/mcde/mcde_dsi_regs.h
+++ b/drivers/gpu/drm/mcde/mcde_dsi_regs.h
@@ -123,17 +123,6 @@
 #define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LONGNOTSHORT BIT(3)
 #define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SHIFT 8
 #define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_MASK 0x00003F00
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_TURN_ON_PERIPHERAL 50
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SHUT_DOWN_PERIPHERAL 34
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_GENERIC_SHORT_WRITE_0 3
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_GENERIC_SHORT_WRITE_1 19
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_GENERIC_SHORT_WRITE_2 35
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_GENERIC_LONG_WRITE 41
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_DCS_SHORT_WRITE_0 5
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_DCS_SHORT_WRITE_1 21
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_DCS_LONG_WRITE 57
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_DCS_READ 6
-#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SET_MAX_PKT_SIZE 55
 #define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_ID_SHIFT 14
 #define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_SIZE_SHIFT 16
 #define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LP_EN BIT(21)
@@ -248,6 +237,16 @@
 
 #define DSI_VID_MODE_STS 0x000000BC
 #define DSI_VID_MODE_STS_VSG_RUNNING BIT(0)
+#define DSI_VID_MODE_STS_ERR_MISSING_DATA BIT(1)
+#define DSI_VID_MODE_STS_ERR_MISSING_HSYNC BIT(2)
+#define DSI_VID_MODE_STS_ERR_MISSING_VSYNC BIT(3)
+#define DSI_VID_MODE_STS_REG_ERR_SMALL_LENGTH BIT(4)
+#define DSI_VID_MODE_STS_REG_ERR_SMALL_HEIGHT BIT(5)
+#define DSI_VID_MODE_STS_ERR_BURSTWRITE BIT(6)
+#define DSI_VID_MODE_STS_ERR_LINEWRITE BIT(7)
+#define DSI_VID_MODE_STS_ERR_LONGREAD BIT(8)
+#define DSI_VID_MODE_STS_ERR_VRS_WRONG_LENGTH BIT(9)
+#define DSI_VID_MODE_STS_VSG_RECOVERY BIT(10)
 
 #define DSI_VID_VCA_SETTING1 0x000000C0
 #define DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT_SHIFT 0