PM / OPP: Move CONFIG_OF dependent code in a separate file

Recently, a few issues were noticed in the code where CONFIG_OF wasn't
consistently used for many routines. The core file is big enough now and
ifdef hackery makes it less readable.

Move OF-specific code to another file and compile that only if CONFIG_OF
is enabled.

Compile-tested:
- For ARM (exynos) with CONFIG_OF enabled
- For X86 with CONFIG_OF disabled (have to enable CONFIG_PM_OPP separately)

No functional changes.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

5 files changed, 618 insertions, 579 deletions

diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
index 19837ef04d8e..e70ceb406fe9 100644
--- a/drivers/base/power/opp/Makefile
+++ b/drivers/base/power/opp/Makefile
@@ -1,3 +1,4 @@
 ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
+obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 9f8bf04b4dbe..f98b01a3a4e7 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -18,7 +18,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/device.h>
-#include <linux/of.h>
 #include <linux/export.h>
 #include <linux/regulator/consumer.h>
 
@@ -29,7 +28,7 @@
  * from here, with each opp_table containing the list of opps it supports in
  * various states of availability.
  */
-static LIST_HEAD(opp_tables);
+LIST_HEAD(opp_tables);
 /* Lock to allow exclusive modification to the device and opp lists */
 DEFINE_MUTEX(opp_table_lock);
 
@@ -53,26 +52,6 @@ static struct opp_device *_find_opp_dev(const struct device *dev,
 	return NULL;
 }
 
-static struct opp_table *_managed_opp(const struct device_node *np)
-{
-	struct opp_table *opp_table;
-
-	list_for_each_entry_rcu(opp_table, &opp_tables, node) {
-		if (opp_table->np == np) {
-			/*
-			 * Multiple devices can point to the same OPP table and
-			 * so will have same node-pointer, np.
-			 *
-			 * But the OPPs will be considered as shared only if the
-			 * OPP table contains a "opp-shared" property.
-			 */
-			return opp_table->shared_opp ? opp_table : NULL;
-		}
-	}
-
-	return NULL;
-}
-
 /**
  * _find_opp_table() - find opp_table struct using device pointer
  * @dev:	device pointer used to lookup OPP table
@@ -760,7 +739,6 @@ static struct opp_table *_add_opp_table(struct device *dev)
 {
 	struct opp_table *opp_table;
 	struct opp_device *opp_dev;
-	struct device_node *np;
 	int ret;
 
 	/* Check for existing table for 'dev' first */
@@ -784,20 +762,7 @@ static struct opp_table *_add_opp_table(struct device *dev)
 		return NULL;
 	}
 
-	/*
-	 * Only required for backward compatibility with v1 bindings, but isn't
-	 * harmful for other cases. And so we do it unconditionally.
-	 */
-	np = of_node_get(dev->of_node);
-	if (np) {
-		u32 val;
-
-		if (!of_property_read_u32(np, "clock-latency", &val))
-			opp_table->clock_latency_ns_max = val;
-		of_property_read_u32(np, "voltage-tolerance",
-				     &opp_table->voltage_tolerance_v1);
-		of_node_put(np);
-	}
+	_of_init_opp_table(opp_table, dev);
 
 	/* Set regulator to a non-NULL error value */
 	opp_table->regulator = ERR_PTR(-ENXIO);
@@ -893,8 +858,8 @@ static void _kfree_opp_rcu(struct rcu_head *head)
  * It is assumed that the caller holds required mutex for an RCU updater
  * strategy.
  */
-static void _opp_remove(struct opp_table *opp_table,
-			struct dev_pm_opp *opp, bool notify)
+void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp,
+		 bool notify)
 {
 	/*
 	 * Notify the changes in the availability of the operable
@@ -955,8 +920,8 @@ unlock:
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
 
-static struct dev_pm_opp *_allocate_opp(struct device *dev,
-					struct opp_table **opp_table)
+struct dev_pm_opp *_allocate_opp(struct device *dev,
+				 struct opp_table **opp_table)
 {
 	struct dev_pm_opp *opp;
 
@@ -992,8 +957,8 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
 	return true;
 }
 
-static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
-		    struct opp_table *opp_table)
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
+	     struct opp_table *opp_table)
 {
 	struct dev_pm_opp *opp;
 	struct list_head *head = &opp_table->opp_list;
@@ -1069,8 +1034,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
  *		Duplicate OPPs (both freq and volt are same) and !opp->available
  * -ENOMEM	Memory allocation failure
  */
-static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
-		       bool dynamic)
+int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
+		bool dynamic)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *new_opp;
@@ -1115,83 +1080,6 @@ unlock:
 	return ret;
 }
 
-/* TODO: Support multiple regulators */
-static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
-			      struct opp_table *opp_table)
-{
-	u32 microvolt[3] = {0};
-	u32 val;
-	int count, ret;
-	struct property *prop = NULL;
-	char name[NAME_MAX];
-
-	/* Search for "opp-microvolt-<name>" */
-	if (opp_table->prop_name) {
-		snprintf(name, sizeof(name), "opp-microvolt-%s",
-			 opp_table->prop_name);
-		prop = of_find_property(opp->np, name, NULL);
-	}
-
-	if (!prop) {
-		/* Search for "opp-microvolt" */
-		sprintf(name, "opp-microvolt");
-		prop = of_find_property(opp->np, name, NULL);
-
-		/* Missing property isn't a problem, but an invalid entry is */
-		if (!prop)
-			return 0;
-	}
-
-	count = of_property_count_u32_elems(opp->np, name);
-	if (count < 0) {
-		dev_err(dev, "%s: Invalid %s property (%d)\n",
-			__func__, name, count);
-		return count;
-	}
-
-	/* There can be one or three elements here */
-	if (count != 1 && count != 3) {
-		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
-			__func__, name, count);
-		return -EINVAL;
-	}
-
-	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
-	if (ret) {
-		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
-		return -EINVAL;
-	}
-
-	opp->u_volt = microvolt[0];
-
-	if (count == 1) {
-		opp->u_volt_min = opp->u_volt;
-		opp->u_volt_max = opp->u_volt;
-	} else {
-		opp->u_volt_min = microvolt[1];
-		opp->u_volt_max = microvolt[2];
-	}
-
-	/* Search for "opp-microamp-<name>" */
-	prop = NULL;
-	if (opp_table->prop_name) {
-		snprintf(name, sizeof(name), "opp-microamp-%s",
-			 opp_table->prop_name);
-		prop = of_find_property(opp->np, name, NULL);
-	}
-
-	if (!prop) {
-		/* Search for "opp-microamp" */
-		sprintf(name, "opp-microamp");
-		prop = of_find_property(opp->np, name, NULL);
-	}
-
-	if (prop && !of_property_read_u32(opp->np, name, &val))
-		opp->u_amp = val;
-
-	return 0;
-}
-
 /**
  * dev_pm_opp_set_supported_hw() - Set supported platforms
  * @dev: Device for which supported-hw has to be set.
@@ -1520,144 +1408,6 @@ unlock:
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
 
-static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
-			      struct device_node *np)
-{
-	unsigned int count = opp_table->supported_hw_count;
-	u32 version;
-	int ret;
-
-	if (!opp_table->supported_hw)
-		return true;
-
-	while (count--) {
-		ret = of_property_read_u32_index(np, "opp-supported-hw", count,
-						 &version);
-		if (ret) {
-			dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
-				 __func__, count, ret);
-			return false;
-		}
-
-		/* Both of these are bitwise masks of the versions */
-		if (!(version & opp_table->supported_hw[count]))
-			return false;
-	}
-
-	return true;
-}
-
-/**
- * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
- * @dev:	device for which we do this operation
- * @np:		device node
- *
- * This function adds an opp definition to the opp table and returns status. The
- * opp can be controlled using dev_pm_opp_enable/disable functions and may be
- * removed by dev_pm_opp_remove.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- *
- * Return:
- * 0		On success OR
- *		Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST	Freq are same and volt are different OR
- *		Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM	Memory allocation failure
- * -EINVAL	Failed parsing the OPP node
- */
-static int _opp_add_static_v2(struct device *dev, struct device_node *np)
-{
-	struct opp_table *opp_table;
-	struct dev_pm_opp *new_opp;
-	u64 rate;
-	u32 val;
-	int ret;
-
-	/* Hold our table modification lock here */
-	mutex_lock(&opp_table_lock);
-
-	new_opp = _allocate_opp(dev, &opp_table);
-	if (!new_opp) {
-		ret = -ENOMEM;
-		goto unlock;
-	}
-
-	ret = of_property_read_u64(np, "opp-hz", &rate);
-	if (ret < 0) {
-		dev_err(dev, "%s: opp-hz not found\n", __func__);
-		goto free_opp;
-	}
-
-	/* Check if the OPP supports hardware's hierarchy of versions or not */
-	if (!_opp_is_supported(dev, opp_table, np)) {
-		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
-		goto free_opp;
-	}
-
-	/*
-	 * Rate is defined as an unsigned long in clk API, and so casting
-	 * explicitly to its type. Must be fixed once rate is 64 bit
-	 * guaranteed in clk API.
-	 */
-	new_opp->rate = (unsigned long)rate;
-	new_opp->turbo = of_property_read_bool(np, "turbo-mode");
-
-	new_opp->np = np;
-	new_opp->dynamic = false;
-	new_opp->available = true;
-
-	if (!of_property_read_u32(np, "clock-latency-ns", &val))
-		new_opp->clock_latency_ns = val;
-
-	ret = opp_parse_supplies(new_opp, dev, opp_table);
-	if (ret)
-		goto free_opp;
-
-	ret = _opp_add(dev, new_opp, opp_table);
-	if (ret)
-		goto free_opp;
-
-	/* OPP to select on device suspend */
-	if (of_property_read_bool(np, "opp-suspend")) {
-		if (opp_table->suspend_opp) {
-			dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
-				 __func__, opp_table->suspend_opp->rate,
-				 new_opp->rate);
-		} else {
-			new_opp->suspend = true;
-			opp_table->suspend_opp = new_opp;
-		}
-	}
-
-	if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
-		opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
-
-	mutex_unlock(&opp_table_lock);
-
-	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
-		 __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
-		 new_opp->u_volt_min, new_opp->u_volt_max,
-		 new_opp->clock_latency_ns);
-
-	/*
-	 * Notify the changes in the availability of the operable
-	 * frequency/voltage list.
-	 */
-	srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp);
-	return 0;
-
-free_opp:
-	_opp_remove(opp_table, new_opp, false);
-unlock:
-	mutex_unlock(&opp_table_lock);
-	return ret;
-}
-
 /**
  * dev_pm_opp_add()  - Add an OPP table from a table definitions
  * @dev:	device for which we do this operation
@@ -1849,7 +1599,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
  * Free OPPs either created using static entries present in DT or even the
  * dynamically added entries based on remove_all param.
  */
-static void _dev_pm_opp_remove_table(struct device *dev, bool remove_all)
+void _dev_pm_opp_remove_table(struct device *dev, bool remove_all)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *opp, *tmp;
@@ -1903,179 +1653,3 @@ void dev_pm_opp_remove_table(struct device *dev)
 	_dev_pm_opp_remove_table(dev, true);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table);
-
-#ifdef CONFIG_OF
-/**
- * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
- *				  entries
- * @dev:	device pointer used to lookup OPP table.
- *
- * Free OPPs created using static entries present in DT.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function indirectly uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- */
-void dev_pm_opp_of_remove_table(struct device *dev)
-{
-	_dev_pm_opp_remove_table(dev, false);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
-
-/* Returns opp descriptor node for a device, caller must do of_node_put() */
-struct device_node *_of_get_opp_desc_node(struct device *dev)
-{
-	/*
-	 * TODO: Support for multiple OPP tables.
-	 *
-	 * There should be only ONE phandle present in "operating-points-v2"
-	 * property.
-	 */
-
-	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
-}
-
-/* Initializes OPP tables based on new bindings */
-static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
-{
-	struct device_node *np;
-	struct opp_table *opp_table;
-	int ret = 0, count = 0;
-
-	mutex_lock(&opp_table_lock);
-
-	opp_table = _managed_opp(opp_np);
-	if (opp_table) {
-		/* OPPs are already managed */
-		if (!_add_opp_dev(dev, opp_table))
-			ret = -ENOMEM;
-		mutex_unlock(&opp_table_lock);
-		return ret;
-	}
-	mutex_unlock(&opp_table_lock);
-
-	/* We have opp-table node now, iterate over it and add OPPs */
-	for_each_available_child_of_node(opp_np, np) {
-		count++;
-
-		ret = _opp_add_static_v2(dev, np);
-		if (ret) {
-			dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
-				ret);
-			goto free_table;
-		}
-	}
-
-	/* There should be one of more OPP defined */
-	if (WARN_ON(!count))
-		return -ENOENT;
-
-	mutex_lock(&opp_table_lock);
-
-	opp_table = _find_opp_table(dev);
-	if (WARN_ON(IS_ERR(opp_table))) {
-		ret = PTR_ERR(opp_table);
-		mutex_unlock(&opp_table_lock);
-		goto free_table;
-	}
-
-	opp_table->np = opp_np;
-	opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");
-
-	mutex_unlock(&opp_table_lock);
-
-	return 0;
-
-free_table:
-	dev_pm_opp_of_remove_table(dev);
-
-	return ret;
-}
-
-/* Initializes OPP tables based on old-deprecated bindings */
-static int _of_add_opp_table_v1(struct device *dev)
-{
-	const struct property *prop;
-	const __be32 *val;
-	int nr;
-
-	prop = of_find_property(dev->of_node, "operating-points", NULL);
-	if (!prop)
-		return -ENODEV;
-	if (!prop->value)
-		return -ENODATA;
-
-	/*
-	 * Each OPP is a set of tuples consisting of frequency and
-	 * voltage like <freq-kHz vol-uV>.
-	 */
-	nr = prop->length / sizeof(u32);
-	if (nr % 2) {
-		dev_err(dev, "%s: Invalid OPP table\n", __func__);
-		return -EINVAL;
-	}
-
-	val = prop->value;
-	while (nr) {
-		unsigned long freq = be32_to_cpup(val++) * 1000;
-		unsigned long volt = be32_to_cpup(val++);
-
-		if (_opp_add_v1(dev, freq, volt, false))
-			dev_warn(dev, "%s: Failed to add OPP %ld\n",
-				 __func__, freq);
-		nr -= 2;
-	}
-
-	return 0;
-}
-
-/**
- * dev_pm_opp_of_add_table() - Initialize opp table from device tree
- * @dev:	device pointer used to lookup OPP table.
- *
- * Register the initial OPP table with the OPP library for given device.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function indirectly uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- *
- * Return:
- * 0		On success OR
- *		Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST	Freq are same and volt are different OR
- *		Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM	Memory allocation failure
- * -ENODEV	when 'operating-points' property is not found or is invalid data
- *		in device node.
- * -ENODATA	when empty 'operating-points' property is found
- * -EINVAL	when invalid entries are found in opp-v2 table
- */
-int dev_pm_opp_of_add_table(struct device *dev)
-{
-	struct device_node *opp_np;
-	int ret;
-
-	/*
-	 * OPPs have two version of bindings now. The older one is deprecated,
-	 * try for the new binding first.
-	 */
-	opp_np = _of_get_opp_desc_node(dev);
-	if (!opp_np) {
-		/*
-		 * Try old-deprecated bindings for backward compatibility with
-		 * older dtbs.
-		 */
-		return _of_add_opp_table_v1(dev);
-	}
-
-	ret = _of_add_opp_table_v2(dev, opp_np);
-	of_node_put(opp_np);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
-#endif
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 357781e0b791..83d6e7ba1a34 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -18,7 +18,6 @@
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/of.h>
 #include <linux/slab.h>
 
 #include "opp.h"
@@ -119,8 +118,7 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
 #endif	/* CONFIG_CPU_FREQ */
 
-static void
-_dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of)
+void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of)
 {
 	struct device *cpu_dev;
 	int cpu;
@@ -162,145 +160,6 @@ void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_remove_table);
 
-#ifdef CONFIG_OF
-/**
- * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask
- * @cpumask:	cpumask for which OPP table needs to be removed
- *
- * This removes the OPP tables for CPUs present in the @cpumask.
- * This should be used only to remove static entries created from DT.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- */
-void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
-{
-	_dev_pm_opp_cpumask_remove_table(cpumask, true);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
-
-/**
- * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask
- * @cpumask:	cpumask for which OPP table needs to be added.
- *
- * This adds the OPP tables for CPUs present in the @cpumask.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- */
-int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
-{
-	struct device *cpu_dev;
-	int cpu, ret = 0;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		ret = dev_pm_opp_of_add_table(cpu_dev);
-		if (ret) {
-			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
-			       __func__, cpu, ret);
-
-			/* Free all other OPPs */
-			dev_pm_opp_of_cpumask_remove_table(cpumask);
-			break;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
-
-/*
- * Works only for OPP v2 bindings.
- *
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
- */
-/**
- * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with
- *				      @cpu_dev using operating-points-v2
- *				      bindings.
- *
- * @cpu_dev:	CPU device for which we do this operation
- * @cpumask:	cpumask to update with information of sharing CPUs
- *
- * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
- *
- * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- */
-int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
-{
-	struct device_node *np, *tmp_np;
-	struct device *tcpu_dev;
-	int cpu, ret = 0;
-
-	/* Get OPP descriptor node */
-	np = _of_get_opp_desc_node(cpu_dev);
-	if (!np) {
-		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
-		return -ENOENT;
-	}
-
-	cpumask_set_cpu(cpu_dev->id, cpumask);
-
-	/* OPPs are shared ? */
-	if (!of_property_read_bool(np, "opp-shared"))
-		goto put_cpu_node;
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		tcpu_dev = get_cpu_device(cpu);
-		if (!tcpu_dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			ret = -ENODEV;
-			goto put_cpu_node;
-		}
-
-		/* Get OPP descriptor node */
-		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (!tmp_np) {
-			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
-				__func__);
-			ret = -ENOENT;
-			goto put_cpu_node;
-		}
-
-		/* CPUs are sharing opp node */
-		if (np == tmp_np)
-			cpumask_set_cpu(cpu, cpumask);
-
-		of_node_put(tmp_np);
-	}
-
-put_cpu_node:
-	of_node_put(np);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
-#endif
-
 /**
  * dev_pm_opp_set_sharing_cpus() - Mark OPP table as shared by few CPUs
  * @cpu_dev:	CPU device for which we do this operation
diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c
new file mode 100644
index 000000000000..94d2010558e3
--- /dev/null
+++ b/drivers/base/power/opp/of.c
@@ -0,0 +1,591 @@
+/*
+ * Generic OPP OF helpers
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/export.h>
+
+#include "opp.h"
+
+static struct opp_table *_managed_opp(const struct device_node *np)
+{
+	struct opp_table *opp_table;
+
+	list_for_each_entry_rcu(opp_table, &opp_tables, node) {
+		if (opp_table->np == np) {
+			/*
+			 * Multiple devices can point to the same OPP table and
+			 * so will have same node-pointer, np.
+			 *
+			 * But the OPPs will be considered as shared only if the
+			 * OPP table contains a "opp-shared" property.
+			 */
+			return opp_table->shared_opp ? opp_table : NULL;
+		}
+	}
+
+	return NULL;
+}
+
+void _of_init_opp_table(struct opp_table *opp_table, struct device *dev)
+{
+	struct device_node *np;
+
+	/*
+	 * Only required for backward compatibility with v1 bindings, but isn't
+	 * harmful for other cases. And so we do it unconditionally.
+	 */
+	np = of_node_get(dev->of_node);
+	if (np) {
+		u32 val;
+
+		if (!of_property_read_u32(np, "clock-latency", &val))
+			opp_table->clock_latency_ns_max = val;
+		of_property_read_u32(np, "voltage-tolerance",
+				     &opp_table->voltage_tolerance_v1);
+		of_node_put(np);
+	}
+}
+
+static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
+			      struct device_node *np)
+{
+	unsigned int count = opp_table->supported_hw_count;
+	u32 version;
+	int ret;
+
+	if (!opp_table->supported_hw)
+		return true;
+
+	while (count--) {
+		ret = of_property_read_u32_index(np, "opp-supported-hw", count,
+						 &version);
+		if (ret) {
+			dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
+				 __func__, count, ret);
+			return false;
+		}
+
+		/* Both of these are bitwise masks of the versions */
+		if (!(version & opp_table->supported_hw[count]))
+			return false;
+	}
+
+	return true;
+}
+
+/* TODO: Support multiple regulators */
+static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
+			      struct opp_table *opp_table)
+{
+	u32 microvolt[3] = {0};
+	u32 val;
+	int count, ret;
+	struct property *prop = NULL;
+	char name[NAME_MAX];
+
+	/* Search for "opp-microvolt-<name>" */
+	if (opp_table->prop_name) {
+		snprintf(name, sizeof(name), "opp-microvolt-%s",
+			 opp_table->prop_name);
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (!prop) {
+		/* Search for "opp-microvolt" */
+		sprintf(name, "opp-microvolt");
+		prop = of_find_property(opp->np, name, NULL);
+
+		/* Missing property isn't a problem, but an invalid entry is */
+		if (!prop)
+			return 0;
+	}
+
+	count = of_property_count_u32_elems(opp->np, name);
+	if (count < 0) {
+		dev_err(dev, "%s: Invalid %s property (%d)\n",
+			__func__, name, count);
+		return count;
+	}
+
+	/* There can be one or three elements here */
+	if (count != 1 && count != 3) {
+		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
+			__func__, name, count);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
+	if (ret) {
+		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
+		return -EINVAL;
+	}
+
+	opp->u_volt = microvolt[0];
+
+	if (count == 1) {
+		opp->u_volt_min = opp->u_volt;
+		opp->u_volt_max = opp->u_volt;
+	} else {
+		opp->u_volt_min = microvolt[1];
+		opp->u_volt_max = microvolt[2];
+	}
+
+	/* Search for "opp-microamp-<name>" */
+	prop = NULL;
+	if (opp_table->prop_name) {
+		snprintf(name, sizeof(name), "opp-microamp-%s",
+			 opp_table->prop_name);
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (!prop) {
+		/* Search for "opp-microamp" */
+		sprintf(name, "opp-microamp");
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (prop && !of_property_read_u32(opp->np, name, &val))
+		opp->u_amp = val;
+
+	return 0;
+}
+
+/**
+ * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
+ *				  entries
+ * @dev:	device pointer used to lookup OPP table.
+ *
+ * Free OPPs created using static entries present in DT.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_of_remove_table(struct device *dev)
+{
+	_dev_pm_opp_remove_table(dev, false);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
+
+/* Returns opp descriptor node for a device, caller must do of_node_put() */
+struct device_node *_of_get_opp_desc_node(struct device *dev)
+{
+	/*
+	 * TODO: Support for multiple OPP tables.
+	 *
+	 * There should be only ONE phandle present in "operating-points-v2"
+	 * property.
+	 */
+
+	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
+}
+
+/**
+ * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
+ * @dev:	device for which we do this operation
+ * @np:		device node
+ *
+ * This function adds an opp definition to the opp table and returns status. The
+ * opp can be controlled using dev_pm_opp_enable/disable functions and may be
+ * removed by dev_pm_opp_remove.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM	Memory allocation failure
+ * -EINVAL	Failed parsing the OPP node
+ */
+static int _opp_add_static_v2(struct device *dev, struct device_node *np)
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *new_opp;
+	u64 rate;
+	u32 val;
+	int ret;
+
+	/* Hold our table modification lock here */
+	mutex_lock(&opp_table_lock);
+
+	new_opp = _allocate_opp(dev, &opp_table);
+	if (!new_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	ret = of_property_read_u64(np, "opp-hz", &rate);
+	if (ret < 0) {
+		dev_err(dev, "%s: opp-hz not found\n", __func__);
+		goto free_opp;
+	}
+
+	/* Check if the OPP supports hardware's hierarchy of versions or not */
+	if (!_opp_is_supported(dev, opp_table, np)) {
+		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
+		goto free_opp;
+	}
+
+	/*
+	 * Rate is defined as an unsigned long in clk API, and so casting
+	 * explicitly to its type. Must be fixed once rate is 64 bit
+	 * guaranteed in clk API.
+	 */
+	new_opp->rate = (unsigned long)rate;
+	new_opp->turbo = of_property_read_bool(np, "turbo-mode");
+
+	new_opp->np = np;
+	new_opp->dynamic = false;
+	new_opp->available = true;
+
+	if (!of_property_read_u32(np, "clock-latency-ns", &val))
+		new_opp->clock_latency_ns = val;
+
+	ret = opp_parse_supplies(new_opp, dev, opp_table);
+	if (ret)
+		goto free_opp;
+
+	ret = _opp_add(dev, new_opp, opp_table);
+	if (ret)
+		goto free_opp;
+
+	/* OPP to select on device suspend */
+	if (of_property_read_bool(np, "opp-suspend")) {
+		if (opp_table->suspend_opp) {
+			dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
+				 __func__, opp_table->suspend_opp->rate,
+				 new_opp->rate);
+		} else {
+			new_opp->suspend = true;
+			opp_table->suspend_opp = new_opp;
+		}
+	}
+
+	if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
+		opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
+
+	mutex_unlock(&opp_table_lock);
+
+	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
+		 __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
+		 new_opp->u_volt_min, new_opp->u_volt_max,
+		 new_opp->clock_latency_ns);
+
+	/*
+	 * Notify the changes in the availability of the operable
+	 * frequency/voltage list.
+	 */
+	srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp);
+	return 0;
+
+free_opp:
+	_opp_remove(opp_table, new_opp, false);
+unlock:
+	mutex_unlock(&opp_table_lock);
+	return ret;
+}
+
+/* Initializes OPP tables based on new bindings */
+static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
+{
+	struct device_node *np;
+	struct opp_table *opp_table;
+	int ret = 0, count = 0;
+
+	mutex_lock(&opp_table_lock);
+
+	opp_table = _managed_opp(opp_np);
+	if (opp_table) {
+		/* OPPs are already managed */
+		if (!_add_opp_dev(dev, opp_table))
+			ret = -ENOMEM;
+		mutex_unlock(&opp_table_lock);
+		return ret;
+	}
+	mutex_unlock(&opp_table_lock);
+
+	/* We have opp-table node now, iterate over it and add OPPs */
+	for_each_available_child_of_node(opp_np, np) {
+		count++;
+
+		ret = _opp_add_static_v2(dev, np);
+		if (ret) {
+			dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
+				ret);
+			goto free_table;
+		}
+	}
+
+	/* There should be one of more OPP defined */
+	if (WARN_ON(!count))
+		return -ENOENT;
+
+	mutex_lock(&opp_table_lock);
+
+	opp_table = _find_opp_table(dev);
+	if (WARN_ON(IS_ERR(opp_table))) {
+		ret = PTR_ERR(opp_table);
+		mutex_unlock(&opp_table_lock);
+		goto free_table;
+	}
+
+	opp_table->np = opp_np;
+	opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");
+
+	mutex_unlock(&opp_table_lock);
+
+	return 0;
+
+free_table:
+	dev_pm_opp_of_remove_table(dev);
+
+	return ret;
+}
+
+/* Initializes OPP tables based on old-deprecated bindings */
+static int _of_add_opp_table_v1(struct device *dev)
+{
+	const struct property *prop;
+	const __be32 *val;
+	int nr;
+
+	prop = of_find_property(dev->of_node, "operating-points", NULL);
+	if (!prop)
+		return -ENODEV;
+	if (!prop->value)
+		return -ENODATA;
+
+	/*
+	 * Each OPP is a set of tuples consisting of frequency and
+	 * voltage like <freq-kHz vol-uV>.
+	 */
+	nr = prop->length / sizeof(u32);
+	if (nr % 2) {
+		dev_err(dev, "%s: Invalid OPP table\n", __func__);
+		return -EINVAL;
+	}
+
+	val = prop->value;
+	while (nr) {
+		unsigned long freq = be32_to_cpup(val++) * 1000;
+		unsigned long volt = be32_to_cpup(val++);
+
+		if (_opp_add_v1(dev, freq, volt, false))
+			dev_warn(dev, "%s: Failed to add OPP %ld\n",
+				 __func__, freq);
+		nr -= 2;
+	}
+
+	return 0;
+}
+
+/**
+ * dev_pm_opp_of_add_table() - Initialize opp table from device tree
+ * @dev:	device pointer used to lookup OPP table.
+ *
+ * Register the initial OPP table with the OPP library for given device.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM	Memory allocation failure
+ * -ENODEV	when 'operating-points' property is not found or is invalid data
+ *		in device node.
+ * -ENODATA	when empty 'operating-points' property is found
+ * -EINVAL	when invalid entries are found in opp-v2 table
+ */
+int dev_pm_opp_of_add_table(struct device *dev)
+{
+	struct device_node *opp_np;
+	int ret;
+
+	/*
+	 * OPPs have two version of bindings now. The older one is deprecated,
+	 * try for the new binding first.
+	 */
+	opp_np = _of_get_opp_desc_node(dev);
+	if (!opp_np) {
+		/*
+		 * Try old-deprecated bindings for backward compatibility with
+		 * older dtbs.
+		 */
+		return _of_add_opp_table_v1(dev);
+	}
+
+	ret = _of_add_opp_table_v2(dev, opp_np);
+	of_node_put(opp_np);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
+
+/* CPU device specific helpers */
+
+/**
+ * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask
+ * @cpumask:	cpumask for which OPP table needs to be removed
+ *
+ * This removes the OPP tables for CPUs present in the @cpumask.
+ * This should be used only to remove static entries created from DT.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
+{
+	_dev_pm_opp_cpumask_remove_table(cpumask, true);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
+
+/**
+ * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask
+ * @cpumask:	cpumask for which OPP table needs to be added.
+ *
+ * This adds the OPP tables for CPUs present in the @cpumask.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
+{
+	struct device *cpu_dev;
+	int cpu, ret = 0;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		ret = dev_pm_opp_of_add_table(cpu_dev);
+		if (ret) {
+			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+			       __func__, cpu, ret);
+
+			/* Free all other OPPs */
+			dev_pm_opp_of_cpumask_remove_table(cpumask);
+			break;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+/**
+ * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with
+ *				      @cpu_dev using operating-points-v2
+ *				      bindings.
+ *
+ * @cpu_dev:	CPU device for which we do this operation
+ * @cpumask:	cpumask to update with information of sharing CPUs
+ *
+ * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
+ *
+ * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
+				   struct cpumask *cpumask)
+{
+	struct device_node *np, *tmp_np;
+	struct device *tcpu_dev;
+	int cpu, ret = 0;
+
+	/* Get OPP descriptor node */
+	np = _of_get_opp_desc_node(cpu_dev);
+	if (!np) {
+		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
+		return -ENOENT;
+	}
+
+	cpumask_set_cpu(cpu_dev->id, cpumask);
+
+	/* OPPs are shared ? */
+	if (!of_property_read_bool(np, "opp-shared"))
+		goto put_cpu_node;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		tcpu_dev = get_cpu_device(cpu);
+		if (!tcpu_dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			ret = -ENODEV;
+			goto put_cpu_node;
+		}
+
+		/* Get OPP descriptor node */
+		tmp_np = _of_get_opp_desc_node(tcpu_dev);
+		if (!tmp_np) {
+			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
+				__func__);
+			ret = -ENOENT;
+			goto put_cpu_node;
+		}
+
+		/* CPUs are sharing opp node */
+		if (np == tmp_np)
+			cpumask_set_cpu(cpu, cpumask);
+
+		of_node_put(tmp_np);
+	}
+
+put_cpu_node:
+	of_node_put(np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index f67f806fcf3a..20f3be22e060 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -28,6 +28,8 @@ struct regulator;
 /* Lock to allow exclusive modification to the device and opp lists */
 extern struct mutex opp_table_lock;
 
+extern struct list_head opp_tables;
+
 /*
  * Internal data structure organization with the OPP layer library is as
  * follows:
@@ -183,6 +185,18 @@ struct opp_table {
 struct opp_table *_find_opp_table(struct device *dev);
 struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
 struct device_node *_of_get_opp_desc_node(struct device *dev);
+void _dev_pm_opp_remove_table(struct device *dev, bool remove_all);
+struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table);
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
+void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, bool notify);
+int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, bool dynamic);
+void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of);
+
+#ifdef CONFIG_OF
+void _of_init_opp_table(struct opp_table *opp_table, struct device *dev);
+#else
+static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) {}
+#endif
 
 #ifdef CONFIG_DEBUG_FS
 void opp_debug_remove_one(struct dev_pm_opp *opp);