diff options
author | David S. Miller <davem@davemloft.net> | 2014-03-14 22:31:55 -0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2014-03-14 22:31:55 -0400 |
commit | 85dcce7a73f1cc59f7a96fe52713b1630f4ca272 (patch) | |
tree | 6c645923eb2f0152073b90685ce80e46cfb7afed /arch | |
parent | 4c4e4113db249c828fffb286bc95ffb255e081f5 (diff) | |
parent | a4ecdf82f8ea49f7d3a072121dcbd0bf3a7cb93a (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/usb/r8152.c
drivers/net/xen-netback/netback.c
Both the r8152 and netback conflicts were simple overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch')
46 files changed, 268 insertions, 382 deletions
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 6b58c1de7577..400c663b21c2 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -282,7 +282,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, #else /* if V-P const for loop, PTAG can be written once outside loop */ if (full_page_op) - write_aux_reg(ARC_REG_DC_PTAG, paddr); + write_aux_reg(aux_tag, paddr); #endif while (num_lines-- > 0) { @@ -296,7 +296,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, write_aux_reg(aux_cmd, vaddr); vaddr += L1_CACHE_BYTES; #else - write_aux_reg(aux, paddr); + write_aux_reg(aux_cmd, paddr); paddr += L1_CACHE_BYTES; #endif } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e25419817791..15949459611f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF choice prompt "Memory split" + depends on MMU default VMSPLIT_3G help Select the desired split between kernel and user memory. @@ -1595,6 +1596,7 @@ endchoice config PAGE_OFFSET hex + default PHYS_OFFSET if !MMU default 0x40000000 if VMSPLIT_1G default 0x80000000 if VMSPLIT_2G default 0xC0000000 @@ -1903,6 +1905,7 @@ config XEN depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 + depends on MMU select ARM_PSCI select SWIOTLB_XEN select ARCH_DMA_ADDR_T_64BIT diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 47279aa96a6a..0714e0334e33 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,4 +1,5 @@ ashldi3.S +bswapsdi2.S font.c lib1funcs.S hyp-stub.S diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index e491b82f8d67..792fde1b7f75 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -147,7 +147,7 @@ }; pinctrl@35004800 { - compatible = "brcm,capri-pinctrl"; + compatible = "brcm,bcm11351-pinctrl"; reg = <0x35004800 0x430>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index c551e4af4d83..d3b253bbc885 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -13,7 +13,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap3"; + compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 25a2b5f652fd..f2779ac75872 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -14,7 +14,7 @@ / { model = "IGEPv2 (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 145c58cfc8ac..2793749eb1ba 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -13,7 +13,7 @@ / { model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 10666ca8aee1..d4d2763f4794 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -426,7 +426,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-ts"; + compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 64961595e8d6..79fd412005b0 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -383,7 +383,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-ts"; + compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 320335abfccd..c463fd730c91 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -346,7 +346,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-ts"; + compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 9ff09484847b..6f25cf559ad0 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -454,7 +454,7 @@ rtc: rtc@01c20d00 { compatible = "allwinner,sun7i-a20-rtc"; reg = <0x01c20d00 0x20>; - interrupts = <0 24 1>; + interrupts = <0 24 4>; }; sid: eeprom@01c23800 { @@ -463,7 +463,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-ts"; + compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <0 29 4>; }; @@ -596,10 +596,10 @@ hstimer@01c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; - interrupts = <0 81 1>, - <0 82 1>, - <0 83 1>, - <0 84 1>; + interrupts = <0 81 4>, + <0 82 4>, + <0 83 4>, + <0 84 4>; clocks = <&ahb_gates 28>; }; diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 00fe9e9710fd..27d69b558c5d 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 8756e4bcdba0..4afb376d9c7c 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -30,14 +30,15 @@ */ #define UL(x) _AC(x, UL) +/* PAGE_OFFSET - the virtual address of the start of the kernel image */ +#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET) + #ifdef CONFIG_MMU /* - * PAGE_OFFSET - the virtual address of the start of the kernel image * TASK_SIZE - the maximum size of a user space task. * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area */ -#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET) #define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M)) #define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M) @@ -104,10 +105,6 @@ #define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE) #endif -#ifndef PAGE_OFFSET -#define PAGE_OFFSET PLAT_PHYS_OFFSET -#endif - /* * The module can be at any place in ram in nommu mode. */ diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 47cd974e57ea..c96ecacb2021 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -177,6 +177,18 @@ __lookup_processor_type_data: .long __proc_info_end .size __lookup_processor_type_data, . - __lookup_processor_type_data +__error_lpae: +#ifdef CONFIG_DEBUG_LL + adr r0, str_lpae + bl printascii + b __error +str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n" +#else + b __error +#endif + .align +ENDPROC(__error_lpae) + __error_p: #ifdef CONFIG_DEBUG_LL adr r0, str_p1 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 914616e0bdcd..f5f381d91556 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -102,7 +102,7 @@ ENTRY(stext) and r3, r3, #0xf @ extract VMSA support cmp r3, #5 @ long-descriptor translation table format? THUMB( it lo ) @ force fixup-able long branch encoding - blo __error_p @ only classic page table format + blo __error_lpae @ only classic page table format #endif #ifndef CONFIG_XIP_KERNEL diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 3b05aea56d1f..11ed9152e665 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = { .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .set_rate = &omap3_clkoutx2_set_rate, .recalc_rate = &omap3_clkoutx2_recalc, + .round_rate = &omap3_clkoutx2_round_rate, }; static const struct clk_ops dpll4_m5x2_ck_3630_ops = { diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 4c158c838d40..01fc710c8181 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -23,6 +23,8 @@ #include "prm.h" #include "clockdomain.h" +#define MAX_CPUS 2 + /* Machine specific information */ struct idle_statedata { u32 cpu_state; @@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = { }, }; -static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS]; -static struct clockdomain *cpu_clkdm[NR_CPUS]; +static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS]; +static struct clockdomain *cpu_clkdm[MAX_CPUS]; static atomic_t abort_barrier; -static bool cpu_done[NR_CPUS]; +static bool cpu_done[MAX_CPUS]; static struct idle_statedata *state_ptr = &omap4_idle_data[0]; /* Private functions */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3185ced807c9..3c418ea54bbe 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk) /* Clock control for DPLL outputs */ +/* Find the parent DPLL for the given clkoutx2 clock */ +static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw) +{ + struct clk_hw_omap *pclk = NULL; + struct clk *parent; + + /* Walk up the parents of clk, looking for a DPLL */ + do { + do { + parent = __clk_get_parent(hw->clk); + hw = __clk_get_hw(parent); + } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC)); + if (!hw) + break; + pclk = to_clk_hw_omap(hw); + } while (pclk && !pclk->dpll_data); + + /* clk does not have a DPLL as a parent? error in the clock data */ + if (!pclk) { + WARN_ON(1); + return NULL; + } + + return pclk; +} + /** * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate * @clk: DPLL output struct clk @@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, unsigned long rate; u32 v; struct clk_hw_omap *pclk = NULL; - struct clk *parent; if (!parent_rate) return 0; - /* Walk up the parents of clk, looking for a DPLL */ - do { - do { - parent = __clk_get_parent(hw->clk); - hw = __clk_get_hw(parent); - } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC)); - if (!hw) - break; - pclk = to_clk_hw_omap(hw); - } while (pclk && !pclk->dpll_data); + pclk = omap3_find_clkoutx2_dpll(hw); - /* clk does not have a DPLL as a parent? error in the clock data */ - if (!pclk) { - WARN_ON(1); + if (!pclk) return 0; - } dd = pclk->dpll_data; @@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, return rate; } +int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + return 0; +} + +long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + const struct dpll_data *dd; + u32 v; + struct clk_hw_omap *pclk = NULL; + + if (!*prate) + return 0; + + pclk = omap3_find_clkoutx2_dpll(hw); + + if (!pclk) + return 0; + + dd = pclk->dpll_data; + + /* TYPE J does not have a clkoutx2 */ + if (dd->flags & DPLL_J_TYPE) { + *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate); + return *prate; + } + + WARN_ON(!dd->enable_mask); + + v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask; + v >>= __ffs(dd->enable_mask); + + /* If in bypass, the rate is fixed to the bypass rate*/ + if (v != OMAP3XXX_EN_DPLL_LOCKED) + return *prate; + + if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) { + unsigned long best_parent; + + best_parent = (rate / 2); + *prate = __clk_round_rate(__clk_get_parent(hw->clk), + best_parent); + } + + return *prate * 2; +} + /* OMAP3/4 non-CORE DPLL clkops */ const struct clk_hw_omap_ops clkhwops_omap3_dpll = { .allow_idle = omap3_dpll_allow_idle, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 42d81885c700..1f33f5db10d5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1947,29 +1947,31 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); - ret = _clear_softreset(oh, &v); - if (ret) - goto dis_opt_clks; - - _write_sysconfig(v, oh); if (oh->class->sysc->srst_udelay) udelay(oh->class->sysc->srst_udelay); c = _wait_softreset_complete(oh); - if (c == MAX_MODULE_SOFTRESET_WAIT) + if (c == MAX_MODULE_SOFTRESET_WAIT) { pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", oh->name, MAX_MODULE_SOFTRESET_WAIT); - else + ret = -ETIMEDOUT; + goto dis_opt_clks; + } else { pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c); + } + + ret = _clear_softreset(oh, &v); + if (ret) + goto dis_opt_clks; + + _write_sysconfig(v, oh); /* * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from * _wait_target_ready() or _reset() */ - ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; - dis_opt_clks: if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) _disable_optional_clocks(oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 18f333c440db..810c205d668b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 3d5b24dcd9a4..c33e07e2f0d4 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -22,6 +22,8 @@ #include "common-board-devices.h" #include "dss-common.h" #include "control.h" +#include "omap-secure.h" +#include "soc.h" struct pdata_init { const char *compatible; @@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void) omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ } + +static void __init nokia_n900_legacy_init(void) +{ + hsmmc2_internal_input_clk(); + + if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { + if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) { + pr_info("RX-51: Enabling ARM errata 430973 workaround\n"); + /* set IBE to 1 */ + rx51_secure_update_aux_cr(BIT(6), 0); + } else { + pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n"); + pr_warning("Thumb binaries may crash randomly without this workaround\n"); + } + } +} #endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_ARCH_OMAP4 @@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #endif #ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata), /* Only on am3517 */ OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), @@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, }, - { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, + { "nokia,omap3-n900", nokia_n900_legacy_init, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 6334b96b4097..280f3c58abe5 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void) OMAP4_PRM_RSTCTRL_OFFSET); v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK; omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION, - OMAP4430_PRM_DEVICE_INST, + dev_inst, OMAP4_PRM_RSTCTRL_OFFSET); /* OCP barrier */ v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - OMAP4430_PRM_DEVICE_INST, + dev_inst, OMAP4_PRM_RSTCTRL_OFFSET); } diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index f33679d2d3ee..50e1d850ee2e 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H +#include "hardware.h" /* Gives GPIO_MAX */ + extern void locomolcd_power(int on); #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c index 2b3a56414271..ef69152f9b52 100644 --- a/arch/arm/mm/dump.c +++ b/arch/arm/mm/dump.c @@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start) note_page(st, addr, 3, pmd_val(*pmd)); else walk_pte(st, pmd, addr); + + if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1])) + note_page(st, addr + SECTION_SIZE, 3, pmd_val(pmd[1])); } } diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h index 09c5a0f5f4d1..86648c083bb4 100644 --- a/arch/c6x/include/asm/cache.h +++ b/arch/c6x/include/asm/cache.h @@ -12,6 +12,7 @@ #define _ASM_C6X_CACHE_H #include <linux/irqflags.h> +#include <linux/init.h> /* * Cache line size diff --git a/arch/cris/include/asm/bitops.h b/arch/cris/include/asm/bitops.h index 184066ceb1f6..053c17b36559 100644 --- a/arch/cris/include/asm/bitops.h +++ b/arch/cris/include/asm/bitops.h @@ -144,7 +144,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) * definition, which doesn't have the same semantics. We don't want to * use -fno-builtin, so just hide the name ffs. */ -#define ffs kernel_ffs +#define ffs(x) kernel_ffs(x) #include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/__fls.h> diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index a96bcf83a735..20e8a9b21d75 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -98,7 +98,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid) /* attempt to allocate a granule's worth of cached memory pages */ page = alloc_pages_exact_node(nid, - GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE, IA64_GRANULE_SHIFT-PAGE_SHIFT); if (!page) { mutex_unlock(&uc_pool->add_chunk_mutex); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 8d4c247f1738..af064d28b365 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1048,6 +1048,15 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) flush_altivec_to_thread(src); flush_vsx_to_thread(src); flush_spe_to_thread(src); + /* + * Flush TM state out so we can copy it. __switch_to_tm() does this + * flush but it removes the checkpointed state from the current CPU and + * transitions the CPU out of TM mode. Hence we need to call + * tm_recheckpoint_new_task() (on the same task) to restore the + * checkpointed state back and the TM mode. + */ + __switch_to_tm(src); + tm_recheckpoint_new_task(src); *dst = *src; diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S index 1482327cfeba..d88736fbece6 100644 --- a/arch/powerpc/kernel/reloc_64.S +++ b/arch/powerpc/kernel/reloc_64.S @@ -81,6 +81,7 @@ _GLOBAL(relocate) 6: blr +.balign 8 p_dyn: .llong __dynamic_start - 0b p_rela: .llong __rela_dyn_start - 0b p_st: .llong _stext - 0b diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 5ec1e47a0d77..e865d748179b 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -123,7 +123,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) area->nid = nid; area->order = order; - area->pages = alloc_pages_exact_node(area->nid, GFP_KERNEL|GFP_THISNODE, + area->pages = alloc_pages_exact_node(area->nid, + GFP_KERNEL|__GFP_THISNODE, area->order); if (!area->pages) { diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index c026cca5602c..f3aaf231b4e5 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -341,10 +341,6 @@ config X86_USE_3DNOW def_bool y depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML -config X86_OOSTORE - def_bool y - depends on (MWINCHIP3D || MWINCHIPC6) && MTRR - # # P6_NOPs are a relatively minor optimization that require a family >= # 6 processor, except that it is broken on certain VIA chips. diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h index 04a48903b2eb..69bbb4845020 100644 --- a/arch/x86/include/asm/barrier.h +++ b/arch/x86/include/asm/barrier.h @@ -85,11 +85,7 @@ #else # define smp_rmb() barrier() #endif -#ifdef CONFIG_X86_OOSTORE -# define smp_wmb() wmb() -#else -# define smp_wmb() barrier() -#endif +#define smp_wmb() barrier() #define smp_read_barrier_depends() read_barrier_depends() #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) #else /* !SMP */ @@ -100,7 +96,7 @@ #define set_mb(var, value) do { var = value; barrier(); } while (0) #endif /* SMP */ -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) +#if defined(CONFIG_X86_PPRO_FENCE) /* * For either of these options x86 doesn't have a strong TSO memory diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 3d6b9f81cc68..acd86c850414 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -134,6 +134,7 @@ extern void efi_setup_page_tables(void); extern void __init old_map_region(efi_memory_desc_t *md); extern void __init runtime_code_page_mkexec(void); extern void __init efi_runtime_mkexec(void); +extern void __init efi_apply_memmap_quirks(void); struct efi_setup_data { u64 fw_vendor; diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 34f69cb9350a..91d9c69a629e 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -237,7 +237,7 @@ memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) static inline void flush_write_buffers(void) { -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) +#if defined(CONFIG_X86_PPRO_FENCE) asm volatile("lock; addl $0,0(%%esp)": : :"memory"); #endif } diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index bf156ded74b5..0f62f5482d91 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -26,10 +26,9 @@ # define LOCK_PTR_REG "D" #endif -#if defined(CONFIG_X86_32) && \ - (defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)) +#if defined(CONFIG_X86_32) && (defined(CONFIG_X86_PPRO_FENCE)) /* - * On PPro SMP or if we are using OOSTORE, we use a locked operation to unlock + * On PPro SMP, we use a locked operation to unlock * (PPro errata 66, 92) */ # define UNLOCK_LOCK_PREFIX LOCK_PREFIX diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 8779edab684e..d8fba5c15fbd 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -8,236 +8,6 @@ #include "cpu.h" -#ifdef CONFIG_X86_OOSTORE - -static u32 power2(u32 x) -{ - u32 s = 1; - - while (s <= x) - s <<= 1; - - return s >>= 1; -} - - -/* - * Set up an actual MCR - */ -static void centaur_mcr_insert(int reg, u32 base, u32 size, int key) -{ - u32 lo, hi; - - hi = base & ~0xFFF; - lo = ~(size-1); /* Size is a power of 2 so this makes a mask */ - lo &= ~0xFFF; /* Remove the ctrl value bits */ - lo |= key; /* Attribute we wish to set */ - wrmsr(reg+MSR_IDT_MCR0, lo, hi); - mtrr_centaur_report_mcr(reg, lo, hi); /* Tell the mtrr driver */ -} - -/* - * Figure what we can cover with MCR's - * - * Shortcut: We know you can't put 4Gig of RAM on a winchip - */ -static u32 ramtop(void) -{ - u32 clip = 0xFFFFFFFFUL; - u32 top = 0; - int i; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long start, end; - - if (e820.map[i].addr > 0xFFFFFFFFUL) - continue; - /* - * Don't MCR over reserved space. Ignore the ISA hole - * we frob around that catastrophe already - */ - if (e820.map[i].type == E820_RESERVED) { - if (e820.map[i].addr >= 0x100000UL && - e820.map[i].addr < clip) - clip = e820.map[i].addr; - continue; - } - start = e820.map[i].addr; - end = e820.map[i].addr + e820.map[i].size; - if (start >= end) - continue; - if (end > top) - top = end; - } - /* - * Everything below 'top' should be RAM except for the ISA hole. - * Because of the limited MCR's we want to map NV/ACPI into our - * MCR range for gunk in RAM - * - * Clip might cause us to MCR insufficient RAM but that is an - * acceptable failure mode and should only bite obscure boxes with - * a VESA hole at 15Mb - * - * The second case Clip sometimes kicks in is when the EBDA is marked - * as reserved. Again we fail safe with reasonable results - */ - if (top > clip) - top = clip; - - return top; -} - -/* - * Compute a set of MCR's to give maximum coverage - */ -static int centaur_mcr_compute(int nr, int key) -{ - u32 mem = ramtop(); - u32 root = power2(mem); - u32 base = root; - u32 top = root; - u32 floor = 0; - int ct = 0; - - while (ct < nr) { - u32 fspace = 0; - u32 high; - u32 low; - - /* - * Find the largest block we will fill going upwards - */ - high = power2(mem-top); - - /* - * Find the largest block we will fill going downwards - */ - low = base/2; - - /* - * Don't fill below 1Mb going downwards as there - * is an ISA hole in the way. - */ - if (base <= 1024*1024) - low = 0; - - /* - * See how much space we could cover by filling below - * the ISA hole - */ - - if (floor == 0) - fspace = 512*1024; - else if (floor == 512*1024) - fspace = 128*1024; - - /* And forget ROM space */ - - /* - * Now install the largest coverage we get - */ - if (fspace > high && fspace > low) { - centaur_mcr_insert(ct, floor, fspace, key); - floor += fspace; - } else if (high > low) { - centaur_mcr_insert(ct, top, high, key); - top += high; - } else if (low > 0) { - base -= low; - centaur_mcr_insert(ct, base, low, key); - } else - break; - ct++; - } - /* - * We loaded ct values. We now need to set the mask. The caller - * must do this bit. - */ - return ct; -} - -static void centaur_create_optimal_mcr(void) -{ - int used; - int i; - - /* - * Allocate up to 6 mcrs to mark as much of ram as possible - * as write combining and weak write ordered. - * - * To experiment with: Linux never uses stack operations for - * mmio spaces so we could globally enable stack operation wc - * - * Load the registers with type 31 - full write combining, all - * writes weakly ordered. - */ - used = centaur_mcr_compute(6, 31); - - /* - * Wipe unused MCRs - */ - for (i = used; i < 8; i++) - wrmsr(MSR_IDT_MCR0+i, 0, 0); -} - -static void winchip2_create_optimal_mcr(void) -{ - u32 lo, hi; - int used; - int i; - - /* - * Allocate up to 6 mcrs to mark as much of ram as possible - * as write combining, weak store ordered. - * - * Load the registers with type 25 - * 8 - weak write ordering - * 16 - weak read ordering - * 1 - write combining - */ - used = centaur_mcr_compute(6, 25); - - /* - * Mark the registers we are using. - */ - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - for (i = 0; i < used; i++) - lo |= 1<<(9+i); - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - - /* - * Wipe unused MCRs - */ - - for (i = used; i < 8; i++) - wrmsr(MSR_IDT_MCR0+i, 0, 0); -} - -/* - * Handle the MCR key on the Winchip 2. - */ -static void winchip2_unprotect_mcr(void) -{ - u32 lo, hi; - u32 key; - - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - lo &= ~0x1C0; /* blank bits 8-6 */ - key = (lo>>17) & 7; - lo |= key<<6; /* replace with unlock key */ - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); -} - -static void winchip2_protect_mcr(void) -{ - u32 lo, hi; - - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - lo &= ~0x1C0; /* blank bits 8-6 */ - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); -} -#endif /* CONFIG_X86_OOSTORE */ - #define ACE_PRESENT (1 << 6) #define ACE_ENABLED (1 << 7) #define ACE_FCR (1 << 28) /* MSR_VIA_FCR */ @@ -362,20 +132,6 @@ static void init_centaur(struct cpuinfo_x86 *c) fcr_clr = DPDC; printk(KERN_NOTICE "Disabling bugged TSC.\n"); clear_cpu_cap(c, X86_FEATURE_TSC); -#ifdef CONFIG_X86_OOSTORE - centaur_create_optimal_mcr(); - /* - * Enable: - * write combining on non-stack, non-string - * write combining on string, all types - * weak write ordering - * - * The C6 original lacks weak read order - * - * Note 0x120 is write only on Winchip 1 - */ - wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); -#endif break; case 8: switch (c->x86_mask) { @@ -392,40 +148,12 @@ static void init_centaur(struct cpuinfo_x86 *c) fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| E2MMX|EAMD3D; fcr_clr = DPDC; -#ifdef CONFIG_X86_OOSTORE - winchip2_unprotect_mcr(); - winchip2_create_optimal_mcr(); - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - /* - * Enable: - * write combining on non-stack, non-string - * write combining on string, all types - * weak write ordering - */ - lo |= 31; - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - winchip2_protect_mcr(); -#endif break; case 9: name = "3"; fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| E2MMX|EAMD3D; fcr_clr = DPDC; -#ifdef CONFIG_X86_OOSTORE - winchip2_unprotect_mcr(); - winchip2_create_optimal_mcr(); - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - /* - * Enable: - * write combining on non-stack, non-string - * write combining on string, all types - * weak write ordering - */ - lo |= 31; - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - winchip2_protect_mcr(); -#endif break; default: name = "??"; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 81ba27679f18..f36bd42d6f0c 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -544,6 +544,10 @@ ENDPROC(early_idt_handlers) /* This is global to keep gas from relaxing the jumps */ ENTRY(early_idt_handler) cld + + cmpl $2,(%esp) # X86_TRAP_NMI + je is_nmi # Ignore NMI + cmpl $2,%ss:early_recursion_flag je hlt_loop incl %ss:early_recursion_flag @@ -594,8 +598,9 @@ ex_entry: pop %edx pop %ecx pop %eax - addl $8,%esp /* drop vector number and error code */ decl %ss:early_recursion_flag +is_nmi: + addl $8,%esp /* drop vector number and error code */ iret ENDPROC(early_idt_handler) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index e1aabdb314c8..a468c0a65c42 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -343,6 +343,9 @@ early_idt_handlers: ENTRY(early_idt_handler) cld + cmpl $2,(%rsp) # X86_TRAP_NMI + je is_nmi # Ignore NMI + cmpl $2,early_recursion_flag(%rip) jz 1f incl early_recursion_flag(%rip) @@ -405,8 +408,9 @@ ENTRY(early_idt_handler) popq %rdx popq %rcx popq %rax - addq $16,%rsp # drop vector number and error code decl early_recursion_flag(%rip) +is_nmi: + addq $16,%rsp # drop vector number and error code INTERRUPT_RETURN ENDPROC(early_idt_handler) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index e8368c6dd2a2..d5dd80814419 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -86,10 +86,19 @@ EXPORT_SYMBOL(__kernel_fpu_begin); void __kernel_fpu_end(void) { - if (use_eager_fpu()) - math_state_restore(); - else + if (use_eager_fpu()) { + /* + * For eager fpu, most the time, tsk_used_math() is true. + * Restore the user math as we are done with the kernel usage. + * At few instances during thread exit, signal handling etc, + * tsk_used_math() is false. Those few places will take proper + * actions, so we don't need to restore the math here. + */ + if (likely(tsk_used_math(current))) + math_state_restore(); + } else { stts(); + } } EXPORT_SYMBOL(__kernel_fpu_end); diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 7c6acd4b8995..ff898bbf579d 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -529,7 +529,7 @@ static void quirk_amd_nb_node(struct pci_dev *dev) return; pci_read_config_dword(nb_ht, 0x60, &val); - node = val & 7; + node = pcibus_to_node(dev->bus) | (val & 7); /* * Some hardware may return an invalid node ID, * so check it first: diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 06853e670354..ce72964b2f46 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1239,14 +1239,8 @@ void __init setup_arch(char **cmdline_p) register_refined_jiffies(CLOCK_TICK_RATE); #ifdef CONFIG_EFI - /* Once setup is done above, unmap the EFI memory map on - * mismatched firmware/kernel archtectures since there is no - * support for runtime services. - */ - if (efi_enabled(EFI_BOOT) && !efi_is_native()) { - pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n"); - efi_unmap_memmap(); - } + if (efi_enabled(EFI_BOOT)) + efi_apply_memmap_quirks(); #endif } diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index e81df8fce027..2de1bc09a8d4 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -3002,10 +3002,8 @@ static int cr8_write_interception(struct vcpu_svm *svm) u8 cr8_prev = kvm_get_cr8(&svm->vcpu); /* instruction emulation calls kvm_set_cr8() */ r = cr_interception(svm); - if (irqchip_in_kernel(svm->vcpu.kvm)) { - clr_cr_intercept(svm, INTERCEPT_CR8_WRITE); + if (irqchip_in_kernel(svm->vcpu.kvm)) return r; - } if (cr8_prev <= kvm_get_cr8(&svm->vcpu)) return r; kvm_run->exit_reason = KVM_EXIT_SET_TPR; @@ -3567,6 +3565,8 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr) if (is_guest_mode(vcpu) && (vcpu->arch.hflags & HF_VINTR_MASK)) return; + clr_cr_intercept(svm, INTERCEPT_CR8_WRITE); + if (irr == -1) return; diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 6dea040cc3a1..a10c8c792161 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -1020,13 +1020,17 @@ static inline bool smap_violation(int error_code, struct pt_regs *regs) * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate * routines. + * + * This function must have noinline because both callers + * {,trace_}do_page_fault() have notrace on. Having this an actual function + * guarantees there's a function trace entry. */ -static void __kprobes -__do_page_fault(struct pt_regs *regs, unsigned long error_code) +static void __kprobes noinline +__do_page_fault(struct pt_regs *regs, unsigned long error_code, + unsigned long address) { struct vm_area_struct *vma; struct task_struct *tsk; - unsigned long address; struct mm_struct *mm; int fault; unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; @@ -1034,9 +1038,6 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code) tsk = current; mm = tsk->mm; - /* Get the faulting address: */ - address = read_cr2(); - /* * Detect and handle instructions that would cause a page fault for * both a tracked kernel page and a userspace page. @@ -1248,32 +1249,50 @@ good_area: up_read(&mm->mmap_sem); } -dotraplinkage void __kprobes +dotraplinkage void __kprobes notrace do_page_fault(struct pt_regs *regs, unsigned long error_code) { + unsigned long address = read_cr2(); /* Get the faulting address */ enum ctx_state prev_state; + /* + * We must have this function tagged with __kprobes, notrace and call + * read_cr2() before calling anything else. To avoid calling any kind + * of tracing machinery before we've observed the CR2 value. + * + * exception_{enter,exit}() contain all sorts of tracepoints. + */ + prev_state = exception_enter(); - __do_page_fault(regs, error_code); + __do_page_fault(regs, error_code, address); exception_exit(prev_state); } -static void trace_page_fault_entries(struct pt_regs *regs, +#ifdef CONFIG_TRACING +static void trace_page_fault_entries(unsigned long address, struct pt_regs *regs, unsigned long error_code) { if (user_mode(regs)) - trace_page_fault_user(read_cr2(), regs, error_code); + trace_page_fault_user(address, regs, error_code); else - trace_page_fault_kernel(read_cr2(), regs, error_code); + trace_page_fault_kernel(address, regs, error_code); } -dotraplinkage void __kprobes +dotraplinkage void __kprobes notrace trace_do_page_fault(struct pt_regs *regs, unsigned long error_code) { + /* + * The exception_enter and tracepoint processing could + * trigger another page faults (user space callchain + * reading) and destroy the original cr2 value, so read + * the faulting address now. + */ + unsigned long address = read_cr2(); enum ctx_state prev_state; prev_state = exception_enter(); - trace_page_fault_entries(regs, error_code); - __do_page_fault(regs, error_code); + trace_page_fault_entries(address, regs, error_code); + __do_page_fault(regs, error_code, address); exception_exit(prev_state); } +#endif /* CONFIG_TRACING */ diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S index 877b9a1b2152..01495755701b 100644 --- a/arch/x86/net/bpf_jit.S +++ b/arch/x86/net/bpf_jit.S @@ -140,7 +140,7 @@ bpf_slow_path_byte_msh: push %r9; \ push SKBDATA; \ /* rsi already has offset */ \ - mov $SIZE,%ecx; /* size */ \ + mov $SIZE,%edx; /* size */ \ call bpf_internal_load_pointer_neg_helper; \ test %rax,%rax; \ pop SKBDATA; \ diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 1a201ac7cef8..b97acecf3fd9 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -52,6 +52,7 @@ #include <asm/tlbflush.h> #include <asm/x86_init.h> #include <asm/rtc.h> +#include <asm/uv/uv.h> #define EFI_DEBUG @@ -1210,3 +1211,22 @@ static int __init parse_efi_cmdline(char *str) return 0; } early_param("efi", parse_efi_cmdline); + +void __init efi_apply_memmap_quirks(void) +{ + /* + * Once setup is done earlier, unmap the EFI memory map on mismatched + * firmware/kernel architectures since there is no support for runtime + * services. + */ + if (!efi_is_native()) { + pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n"); + efi_unmap_memmap(); + } + + /* + * UV doesn't support the new EFI pagetable mapping yet. + */ + if (is_uv_system()) + set_bit(EFI_OLD_MEMMAP, &x86_efi_facility); +} diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h index 7d01b8c56c00..cc04e67bfd05 100644 --- a/arch/x86/um/asm/barrier.h +++ b/arch/x86/um/asm/barrier.h @@ -40,11 +40,7 @@ #define smp_rmb() barrier() #endif /* CONFIG_X86_PPRO_FENCE */ -#ifdef CONFIG_X86_OOSTORE -#define smp_wmb() wmb() -#else /* CONFIG_X86_OOSTORE */ #define smp_wmb() barrier() -#endif /* CONFIG_X86_OOSTORE */ #define smp_read_barrier_depends() read_barrier_depends() #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) |