summaryrefslogtreecommitdiff
path: root/arch/sh/mm
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2020-04-20 11:37:12 +0200
committerRich Felker <dalias@libc.org>2020-06-01 14:48:52 -0400
commit37744feebc086908fd89760650f458ab19071750 (patch)
tree15e16a15e2800c72e37ffee315f17ea9792f3ea6 /arch/sh/mm
parentd1f56f318d234fc5db230af2f3e0088f689ab3c0 (diff)
sh: remove sh5 support
sh5 never became a product and has probably never really worked. Remove it by recursively deleting all associated Kconfig options and all corresponding files. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rich Felker <dalias@libc.org>
Diffstat (limited to 'arch/sh/mm')
-rw-r--r--arch/sh/mm/Kconfig16
-rw-r--r--arch/sh/mm/Makefile31
-rw-r--r--arch/sh/mm/cache-sh5.c621
-rw-r--r--arch/sh/mm/cache.c6
-rw-r--r--arch/sh/mm/extable_64.c84
-rw-r--r--arch/sh/mm/tlb-sh5.c224
-rw-r--r--arch/sh/mm/tlbex_64.c166
-rw-r--r--arch/sh/mm/tlbflush_64.c172
8 files changed, 7 insertions, 1313 deletions
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5c8a2ebfc720..6c39d24ad919 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -15,8 +15,7 @@ config MMU
config PAGE_OFFSET
hex
- default "0x80000000" if MMU && SUPERH32
- default "0x20000000" if MMU && SUPERH64
+ default "0x80000000" if MMU
default "0x00000000"
config FORCE_MAX_ZONEORDER
@@ -72,12 +71,11 @@ config MEMORY_SIZE
config 29BIT
def_bool !32BIT
- depends on SUPERH32
select UNCACHED_MAPPING
config 32BIT
bool
- default y if CPU_SH5 || !MMU
+ default !MMU
config PMB
bool "Support 32-bit physical addressing through PMB"
@@ -152,7 +150,7 @@ config ARCH_MEMORY_PROBE
config IOREMAP_FIXED
def_bool y
- depends on X2TLB || SUPERH64
+ depends on X2TLB
config UNCACHED_MAPPING
bool
@@ -184,7 +182,7 @@ config PAGE_SIZE_16KB
config PAGE_SIZE_64KB
bool "64kB"
- depends on !MMU || CPU_SH4 || CPU_SH5
+ depends on !MMU || CPU_SH4
help
This enables support for 64kB pages, possible on all SH-4
CPUs and later.
@@ -216,10 +214,6 @@ config HUGETLB_PAGE_SIZE_64MB
bool "64MB"
depends on X2TLB
-config HUGETLB_PAGE_SIZE_512MB
- bool "512MB"
- depends on CPU_SH5
-
endchoice
config SCHED_MC
@@ -242,7 +236,7 @@ config SH7705_CACHE_32KB
choice
prompt "Cache mode"
- default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
+ default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
config CACHE_WRITEBACK
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 5051b38fd5b6..487da0ff03b3 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -10,15 +10,14 @@ cacheops-$(CONFIG_CPU_SUBTYPE_SH7619) := cache-sh2.o
cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o
cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_CPU_SH5) := cache-sh5.o flush-sh4.o
cacheops-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
cacheops-$(CONFIG_CPU_SHX3) += cache-shx3.o
obj-y += $(cacheops-y)
mmu-y := nommu.o extable_32.o
-mmu-$(CONFIG_MMU) := extable_$(BITS).o fault.o ioremap.o kmap.o \
- pgtable.o tlbex_$(BITS).o tlbflush_$(BITS).o
+mmu-$(CONFIG_MMU) := extable_32.o fault.o ioremap.o kmap.o \
+ pgtable.o tlbex_32.o tlbflush_32.o
obj-y += $(mmu-y)
@@ -31,7 +30,6 @@ ifdef CONFIG_MMU
debugfs-$(CONFIG_CPU_SH4) += tlb-debugfs.o
tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o
-tlb-$(CONFIG_CPU_SH5) := tlb-sh5.o
tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o
obj-y += $(tlb-y)
endif
@@ -46,29 +44,4 @@ obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
GCOV_PROFILE_pmb.o := n
-# Special flags for tlbex_64.o. This puts restrictions on the number of
-# caller-save registers that the compiler can target when building this file.
-# This is required because the code is called from a context in entry.S where
-# very few registers have been saved in the exception handler (for speed
-# reasons).
-# The caller save registers that have been saved and which can be used are
-# r2,r3,r4,r5 : argument passing
-# r15, r18 : SP and LINK
-# tr0-4 : allow all caller-save TR's. The compiler seems to be able to make
-# use of them, so it's probably beneficial to performance to save them
-# and have them available for it.
-#
-# The resources not listed below are callee save, i.e. the compiler is free to
-# use any of them and will spill them to the stack itself.
-
-CFLAGS_tlbex_64.o += -ffixed-r7 \
- -ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
- -ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
- -ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
- -ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
- -ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
- -ffixed-r41 -ffixed-r42 -ffixed-r43 \
- -ffixed-r60 -ffixed-r61 -ffixed-r62 \
- -fomit-frame-pointer
-
ccflags-y := -Werror
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
deleted file mode 100644
index 445b5e69b73c..000000000000
--- a/arch/sh/mm/cache-sh5.c
+++ /dev/null
@@ -1,621 +0,0 @@
-/*
- * arch/sh/mm/cache-sh5.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2002 Benedict Gaster
- * Copyright (C) 2003 Richard Curnow
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <asm/tlb.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/pgalloc.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-
-extern void __weak sh4__flush_region_init(void);
-
-/* Wired TLB entry for the D-cache */
-static unsigned long long dtlb_cache_slot;
-
-/*
- * The following group of functions deal with mapping and unmapping a
- * temporary page into a DTLB slot that has been set aside for exclusive
- * use.
- */
-static inline void
-sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid,
- unsigned long paddr)
-{
- local_irq_disable();
- sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
-}
-
-static inline void sh64_teardown_dtlb_cache_slot(void)
-{
- sh64_teardown_tlb_slot(dtlb_cache_slot);
- local_irq_enable();
-}
-
-static inline void sh64_icache_inv_all(void)
-{
- unsigned long long addr, flag, data;
- unsigned long flags;
-
- addr = ICCR0;
- flag = ICCR0_ICI;
- data = 0;
-
- /* Make this a critical section for safety (probably not strictly necessary.) */
- local_irq_save(flags);
-
- /* Without %1 it gets unexplicably wrong */
- __asm__ __volatile__ (
- "getcfg %3, 0, %0\n\t"
- "or %0, %2, %0\n\t"
- "putcfg %3, 0, %0\n\t"
- "synci"
- : "=&r" (data)
- : "0" (data), "r" (flag), "r" (addr));
-
- local_irq_restore(flags);
-}
-
-static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
-{
- /* Invalidate range of addresses [start,end] from the I-cache, where
- * the addresses lie in the kernel superpage. */
-
- unsigned long long ullend, addr, aligned_start;
- aligned_start = (unsigned long long)(signed long long)(signed long) start;
- addr = L1_CACHE_ALIGN(aligned_start);
- ullend = (unsigned long long) (signed long long) (signed long) end;
-
- while (addr <= ullend) {
- __asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
- addr += L1_CACHE_BYTES;
- }
-}
-
-static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr)
-{
- /* If we get called, we know that vma->vm_flags contains VM_EXEC.
- Also, eaddr is page-aligned. */
- unsigned int cpu = smp_processor_id();
- unsigned long long addr, end_addr;
- unsigned long flags = 0;
- unsigned long running_asid, vma_asid;
- addr = eaddr;
- end_addr = addr + PAGE_SIZE;
-
- /* Check whether we can use the current ASID for the I-cache
- invalidation. For example, if we're called via
- access_process_vm->flush_cache_page->here, (e.g. when reading from
- /proc), 'running_asid' will be that of the reader, not of the
- victim.
-
- Also, note the risk that we might get pre-empted between the ASID
- compare and blocking IRQs, and before we regain control, the
- pid->ASID mapping changes. However, the whole cache will get
- invalidated when the mapping is renewed, so the worst that can
- happen is that the loop below ends up invalidating somebody else's
- cache entries.
- */
-
- running_asid = get_asid();
- vma_asid = cpu_asid(cpu, vma->vm_mm);
- if (running_asid != vma_asid) {
- local_irq_save(flags);
- switch_and_save_asid(vma_asid);
- }
- while (addr < end_addr) {
- /* Worth unrolling a little */
- __asm__ __volatile__("icbi %0, 0" : : "r" (addr));
- __asm__ __volatile__("icbi %0, 32" : : "r" (addr));
- __asm__ __volatile__("icbi %0, 64" : : "r" (addr));
- __asm__ __volatile__("icbi %0, 96" : : "r" (addr));
- addr += 128;
- }
- if (running_asid != vma_asid) {
- switch_and_save_asid(running_asid);
- local_irq_restore(flags);
- }
-}
-
-static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- /* Used for invalidating big chunks of I-cache, i.e. assume the range
- is whole pages. If 'start' or 'end' is not page aligned, the code
- is conservative and invalidates to the ends of the enclosing pages.
- This is functionally OK, just a performance loss. */
-
- /* See the comments below in sh64_dcache_purge_user_range() regarding
- the choice of algorithm. However, for the I-cache option (2) isn't
- available because there are no physical tags so aliases can't be
- resolved. The icbi instruction has to be used through the user
- mapping. Because icbi is cheaper than ocbp on a cache hit, it
- would be cheaper to use the selective code for a large range than is
- possible with the D-cache. Just assume 64 for now as a working
- figure.
- */
- int n_pages;
-
- if (!mm)
- return;
-
- n_pages = ((end - start) >> PAGE_SHIFT);
- if (n_pages >= 64) {
- sh64_icache_inv_all();
- } else {
- unsigned long aligned_start;
- unsigned long eaddr;
- unsigned long after_last_page_start;
- unsigned long mm_asid, current_asid;
- unsigned long flags = 0;
-
- mm_asid = cpu_asid(smp_processor_id(), mm);
- current_asid = get_asid();
-
- if (mm_asid != current_asid) {
- /* Switch ASID and run the invalidate loop under cli */
- local_irq_save(flags);
- switch_and_save_asid(mm_asid);
- }
-
- aligned_start = start & PAGE_MASK;
- after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
-
- while (aligned_start < after_last_page_start) {
- struct vm_area_struct *vma;
- unsigned long vma_end;
- vma = find_vma(mm, aligned_start);
- if (!vma || (aligned_start <= vma->vm_end)) {
- /* Avoid getting stuck in an error condition */
- aligned_start += PAGE_SIZE;
- continue;
- }
- vma_end = vma->vm_end;
- if (vma->vm_flags & VM_EXEC) {
- /* Executable */
- eaddr = aligned_start;
- while (eaddr < vma_end) {
- sh64_icache_inv_user_page(vma, eaddr);
- eaddr += PAGE_SIZE;
- }
- }
- aligned_start = vma->vm_end; /* Skip to start of next region */
- }
-
- if (mm_asid != current_asid) {
- switch_and_save_asid(current_asid);
- local_irq_restore(flags);
- }
- }
-}
-
-static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
-{
- /* The icbi instruction never raises ITLBMISS. i.e. if there's not a
- cache hit on the virtual tag the instruction ends there, without a
- TLB lookup. */
-
- unsigned long long aligned_start;
- unsigned long long ull_end;
- unsigned long long addr;
-
- ull_end = end;
-
- /* Just invalidate over the range using the natural addresses. TLB
- miss handling will be OK (TBC). Since it's for the current process,
- either we're already in the right ASID context, or the ASIDs have
- been recycled since we were last active in which case we might just
- invalidate another processes I-cache entries : no worries, just a
- performance drop for him. */
- aligned_start = L1_CACHE_ALIGN(start);
- addr = aligned_start;
- while (addr < ull_end) {
- __asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
- __asm__ __volatile__ ("nop");
- __asm__ __volatile__ ("nop");
- addr += L1_CACHE_BYTES;
- }
-}
-
-/* Buffer used as the target of alloco instructions to purge data from cache
- sets by natural eviction. -- RPC */
-#define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
-static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, };
-
-static inline void sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
-{
- /* Purge all ways in a particular block of sets, specified by the base
- set number and number of sets. Can handle wrap-around, if that's
- needed. */
-
- int dummy_buffer_base_set;
- unsigned long long eaddr, eaddr0, eaddr1;
- int j;
- int set_offset;
-
- dummy_buffer_base_set = ((int)&dummy_alloco_area &
- cpu_data->dcache.entry_mask) >>
- cpu_data->dcache.entry_shift;
- set_offset = sets_to_purge_base - dummy_buffer_base_set;
-
- for (j = 0; j < n_sets; j++, set_offset++) {
- set_offset &= (cpu_data->dcache.sets - 1);
- eaddr0 = (unsigned long long)dummy_alloco_area +
- (set_offset << cpu_data->dcache.entry_shift);
-
- /*
- * Do one alloco which hits the required set per cache
- * way. For write-back mode, this will purge the #ways
- * resident lines. There's little point unrolling this
- * loop because the allocos stall more if they're too
- * close together.
- */
- eaddr1 = eaddr0 + cpu_data->dcache.way_size *
- cpu_data->dcache.ways;
-
- for (eaddr = eaddr0; eaddr < eaddr1;
- eaddr += cpu_data->dcache.way_size) {
- __asm__ __volatile__ ("alloco %0, 0" : : "r" (eaddr));
- __asm__ __volatile__ ("synco"); /* TAKum03020 */
- }
-
- eaddr1 = eaddr0 + cpu_data->dcache.way_size *
- cpu_data->dcache.ways;
-
- for (eaddr = eaddr0; eaddr < eaddr1;
- eaddr += cpu_data->dcache.way_size) {
- /*
- * Load from each address. Required because
- * alloco is a NOP if the cache is write-through.
- */
- if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
- __raw_readb((unsigned long)eaddr);
- }
- }
-
- /*
- * Don't use OCBI to invalidate the lines. That costs cycles
- * directly. If the dummy block is just left resident, it will
- * naturally get evicted as required.
- */
-}
-
-/*
- * Purge the entire contents of the dcache. The most efficient way to
- * achieve this is to use alloco instructions on a region of unused
- * memory equal in size to the cache, thereby causing the current
- * contents to be discarded by natural eviction. The alternative, namely
- * reading every tag, setting up a mapping for the corresponding page and
- * doing an OCBP for the line, would be much more expensive.
- */
-static void sh64_dcache_purge_all(void)
-{
-
- sh64_dcache_purge_sets(0, cpu_data->dcache.sets);
-}
-
-
-/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for
- anything else in the kernel */
-#define MAGIC_PAGE0_START 0xffffffffec000000ULL
-
-/* Purge the physical page 'paddr' from the cache. It's known that any
- * cache lines requiring attention have the same page colour as the the
- * address 'eaddr'.
- *
- * This relies on the fact that the D-cache matches on physical tags when
- * no virtual tag matches. So we create an alias for the original page
- * and purge through that. (Alternatively, we could have done this by
- * switching ASID to match the original mapping and purged through that,
- * but that involves ASID switching cost + probably a TLBMISS + refill
- * anyway.)
- */
-static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr,
- unsigned long eaddr)
-{
- unsigned long long magic_page_start;
- unsigned long long magic_eaddr, magic_eaddr_end;
-
- magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK);
-
- /* As long as the kernel is not pre-emptible, this doesn't need to be
- under cli/sti. */
- sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr);
-
- magic_eaddr = magic_page_start;
- magic_eaddr_end = magic_eaddr + PAGE_SIZE;
-
- while (magic_eaddr < magic_eaddr_end) {
- /* Little point in unrolling this loop - the OCBPs are blocking
- and won't go any quicker (i.e. the loop overhead is parallel
- to part of the OCBP execution.) */
- __asm__ __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr));
- magic_eaddr += L1_CACHE_BYTES;
- }
-
- sh64_teardown_dtlb_cache_slot();
-}
-
-/*
- * Purge a page given its physical start address, by creating a temporary
- * 1 page mapping and purging across that. Even if we know the virtual
- * address (& vma or mm) of the page, the method here is more elegant
- * because it avoids issues of coping with page faults on the purge
- * instructions (i.e. no special-case code required in the critical path
- * in the TLB miss handling).
- */
-static void sh64_dcache_purge_phy_page(unsigned long paddr)
-{
- unsigned long long eaddr_start, eaddr, eaddr_end;
- int i;
-
- /* As long as the kernel is not pre-emptible, this doesn't need to be
- under cli/sti. */
- eaddr_start = MAGIC_PAGE0_START;
- for (i = 0; i < (1 << CACHE_OC_N_SYNBITS); i++) {
- sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr);
-
- eaddr = eaddr_start;
- eaddr_end = eaddr + PAGE_SIZE;
- while (eaddr < eaddr_end) {
- __asm__ __volatile__ ("ocbp %0, 0" : : "r" (eaddr));
- eaddr += L1_CACHE_BYTES;
- }
-
- sh64_teardown_dtlb_cache_slot();
- eaddr_start += PAGE_SIZE;
- }
-}
-
-static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
- unsigned long addr, unsigned long end)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
- spinlock_t *ptl;
- unsigned long paddr;
-
- if (!mm)
- return; /* No way to find physical address of page */
-
- pgd = pgd_offset(mm, addr);
- if (pgd_bad(*pgd))
- return;
-
- pud = pud_offset(pgd, addr);
- if (pud_none(*pud) || pud_bad(*pud))
- return;
-
- pmd = pmd_offset(pud, addr);
- if (pmd_none(*pmd) || pmd_bad(*pmd))
- return;
-
- pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- do {
- entry = *pte;
- if (pte_none(entry) || !pte_present(entry))
- continue;
- paddr = pte_val(entry) & PAGE_MASK;
- sh64_dcache_purge_coloured_phy_page(paddr, addr);
- } while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap_unlock(pte - 1, ptl);
-}
-
-/*
- * There are at least 5 choices for the implementation of this, with
- * pros (+), cons(-), comments(*):
- *
- * 1. ocbp each line in the range through the original user's ASID
- * + no lines spuriously evicted
- * - tlbmiss handling (must either handle faults on demand => extra
- * special-case code in tlbmiss critical path), or map the page in
- * advance (=> flush_tlb_range in advance to avoid multiple hits)
- * - ASID switching
- * - expensive for large ranges
- *
- * 2. temporarily map each page in the range to a special effective
- * address and ocbp through the temporary mapping; relies on the
- * fact that SH-5 OCB* always do TLB lookup and match on ptags (they
- * never look at the etags)
- * + no spurious evictions
- * - expensive for large ranges
- * * surely cheaper than (1)
- *
- * 3. walk all the lines in the cache, check the tags, if a match
- * occurs create a page mapping to ocbp the line through
- * + no spurious evictions
- * - tag inspection overhead
- * - (especially for small ranges)
- * - potential cost of setting up/tearing down page mapping for
- * every line that matches the range
- * * cost partly independent of range size
- *
- * 4. walk all the lines in the cache, check the tags, if a match
- * occurs use 4 * alloco to purge the line (+3 other probably
- * innocent victims) by natural eviction
- * + no tlb mapping overheads
- * - spurious evictions
- * - tag inspection overhead
- *
- * 5. implement like flush_cache_all
- * + no tag inspection overhead
- * - spurious evictions
- * - bad for small ranges
- *
- * (1) can be ruled out as more expensive than (2). (2) appears best
- * for small ranges. The choice between (3), (4) and (5) for large
- * ranges and the range size for the large/small boundary need
- * benchmarking to determine.
- *
- * For now use approach (2) for small ranges and (5) for large ones.
- */
-static void sh64_dcache_purge_user_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- int n_pages = ((end - start) >> PAGE_SHIFT);
-
- if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
- sh64_dcache_purge_all();
- } else {
- /* Small range, covered by a single page table page */
- start &= PAGE_MASK; /* should already be so */
- end = PAGE_ALIGN(end); /* should already be so */
- sh64_dcache_purge_user_pages(mm, start, end);
- }
-}
-
-/*
- * Invalidate the entire contents of both caches, after writing back to
- * memory any dirty data from the D-cache.
- */
-static void sh5_flush_cache_all(void *unused)
-{
- sh64_dcache_purge_all();
- sh64_icache_inv_all();
-}
-
-/*
- * Invalidate an entire user-address space from both caches, after
- * writing back dirty data (e.g. for shared mmap etc).
- *
- * This could be coded selectively by inspecting all the tags then
- * doing 4*alloco on any set containing a match (as for
- * flush_cache_range), but fork/exit/execve (where this is called from)
- * are expensive anyway.
- *
- * Have to do a purge here, despite the comments re I-cache below.
- * There could be odd-coloured dirty data associated with the mm still
- * in the cache - if this gets written out through natural eviction
- * after the kernel has reused the page there will be chaos.
- *
- * The mm being torn down won't ever be active again, so any Icache
- * lines tagged with its ASID won't be visible for the rest of the
- * lifetime of this ASID cycle. Before the ASID gets reused, there
- * will be a flush_cache_all. Hence we don't need to touch the
- * I-cache. This is similar to the lack of action needed in
- * flush_tlb_mm - see fault.c.
- */
-static void sh5_flush_cache_mm(void *unused)
-{
- sh64_dcache_purge_all();
-}
-
-/*
- * Invalidate (from both caches) the range [start,end) of virtual
- * addresses from the user address space specified by mm, after writing
- * back any dirty data.
- *
- * Note, 'end' is 1 byte beyond the end of the range to flush.
- */
-static void sh5_flush_cache_range(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long start, end;
-
- vma = data->vma;
- start = data->addr1;
- end = data->addr2;
-
- sh64_dcache_purge_user_range(vma->vm_mm, start, end);
- sh64_icache_inv_user_page_range(vma->vm_mm, start, end);
-}
-
-/*
- * Invalidate any entries in either cache for the vma within the user
- * address space vma->vm_mm for the page starting at virtual address
- * 'eaddr'. This seems to be used primarily in breaking COW. Note,
- * the I-cache must be searched too in case the page in question is
- * both writable and being executed from (e.g. stack trampolines.)
- *
- * Note, this is called with pte lock held.
- */
-static void sh5_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long eaddr, pfn;
-
- vma = data->vma;
- eaddr = data->addr1;
- pfn = data->addr2;
-
- sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
-
- if (vma->vm_flags & VM_EXEC)
- sh64_icache_inv_user_page(vma, eaddr);
-}
-
-static void sh5_flush_dcache_page(void *page)
-{
- sh64_dcache_purge_phy_page(page_to_phys((struct page *)page));
- wmb();
-}
-
-/*
- * Flush the range [start,end] of kernel virtual address space from
- * the I-cache. The corresponding range must be purged from the
- * D-cache also because the SH-5 doesn't have cache snooping between
- * the caches. The addresses will be visible through the superpage
- * mapping, therefore it's guaranteed that there no cache entries for
- * the range in cache sets of the wrong colour.
- */
-static void sh5_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
-
- start = data->addr1;
- end = data->addr2;
-
- __flush_purge_region((void *)start, end);
- wmb();
- sh64_icache_inv_kernel_range(start, end);
-}
-
-/*
- * For the address range [start,end), write back the data from the
- * D-cache and invalidate the corresponding region of the I-cache for the
- * current process. Used to flush signal trampolines on the stack to
- * make them executable.
- */
-static void sh5_flush_cache_sigtramp(void *vaddr)
-{
- unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES;
-
- __flush_wback_region(vaddr, L1_CACHE_BYTES);
- wmb();
- sh64_icache_inv_current_user_range((unsigned long)vaddr, end);
-}
-
-void __init sh5_cache_init(void)
-{
- local_flush_cache_all = sh5_flush_cache_all;
- local_flush_cache_mm = sh5_flush_cache_mm;
- local_flush_cache_dup_mm = sh5_flush_cache_mm;
- local_flush_cache_page = sh5_flush_cache_page;
- local_flush_cache_range = sh5_flush_cache_range;
- local_flush_dcache_page = sh5_flush_dcache_page;
- local_flush_icache_range = sh5_flush_icache_range;
- local_flush_cache_sigtramp = sh5_flush_cache_sigtramp;
-
- /* Reserve a slot for dcache colouring in the DTLB */
- dtlb_cache_slot = sh64_get_wired_dtlb_entry();
-
- sh4__flush_region_init();
-}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 464f160a9576..3aef78ceb820 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -355,12 +355,6 @@ void __init cpu_cache_init(void)
}
}
- if (boot_cpu_data.family == CPU_FAMILY_SH5) {
- extern void __weak sh5_cache_init(void);
-
- sh5_cache_init();
- }
-
skip:
emit_cache_params();
}
diff --git a/arch/sh/mm/extable_64.c b/arch/sh/mm/extable_64.c
deleted file mode 100644
index 7a3b4d33d2e7..000000000000
--- a/arch/sh/mm/extable_64.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/sh/mm/extable_64.c
- *
- * Copyright (C) 2003 Richard Curnow
- * Copyright (C) 2003, 2004 Paul Mundt
- *
- * Cloned from the 2.5 SH version..
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/bsearch.h>
-#include <linux/rwsem.h>
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-extern unsigned long copy_user_memcpy, copy_user_memcpy_end;
-extern void __copy_user_fixup(void);
-
-static const struct exception_table_entry __copy_user_fixup_ex = {
- .fixup = (unsigned long)&__copy_user_fixup,
-};
-
-/*
- * Some functions that may trap due to a bad user-mode address have too
- * many loads and stores in them to make it at all practical to label
- * each one and put them all in the main exception table.
- *
- * In particular, the fast memcpy routine is like this. It's fix-up is
- * just to fall back to a slow byte-at-a-time copy, which is handled the
- * conventional way. So it's functionally OK to just handle any trap
- * occurring in the fast memcpy with that fixup.
- */
-static const struct exception_table_entry *check_exception_ranges(unsigned long addr)
-{
- if ((addr >= (unsigned long)&copy_user_memcpy) &&
- (addr <= (unsigned long)&copy_user_memcpy_end))
- return &__copy_user_fixup_ex;
-
- return NULL;
-}
-
-static int cmp_ex_search(const void *key, const void *elt)
-{
- const struct exception_table_entry *_elt = elt;
- unsigned long _key = *(unsigned long *)key;
-
- /* avoid overflow */
- if (_key > _elt->insn)
- return 1;
- if (_key < _elt->insn)
- return -1;
- return 0;
-}
-
-/* Simple binary search */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *base,
- const size_t num,
- unsigned long value)
-{
- const struct exception_table_entry *mid;
-
- mid = check_exception_ranges(value);
- if (mid)
- return mid;
-
- return bsearch(&value, base, num,
- sizeof(struct exception_table_entry), cmp_ex_search);
-}
-
-int fixup_exception(struct pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return 1;
- }
-
- return 0;
-}
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
deleted file mode 100644
index e4bb2a8e0a69..000000000000
--- a/arch/sh/mm/tlb-sh5.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * arch/sh/mm/tlb-sh5.c
- *
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- * Copyright (C) 2003 Richard Curnow <richard.curnow@superh.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/tlb.h>
-#include <asm/mmu_context.h>
-
-/**
- * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
- */
-int sh64_tlb_init(void)
-{
- /* Assign some sane DTLB defaults */
- cpu_data->dtlb.entries = 64;
- cpu_data->dtlb.step = 0x10;
-
- cpu_data->dtlb.first = DTLB_FIXED | cpu_data->dtlb.step;
- cpu_data->dtlb.next = cpu_data->dtlb.first;
-
- cpu_data->dtlb.last = DTLB_FIXED |
- ((cpu_data->dtlb.entries - 1) *
- cpu_data->dtlb.step);
-
- /* And again for the ITLB */
- cpu_data->itlb.entries = 64;
- cpu_data->itlb.step = 0x10;
-
- cpu_data->itlb.first = ITLB_FIXED | cpu_data->itlb.step;
- cpu_data->itlb.next = cpu_data->itlb.first;
- cpu_data->itlb.last = ITLB_FIXED |
- ((cpu_data->itlb.entries - 1) *
- cpu_data->itlb.step);
-
- return 0;
-}
-
-/**
- * sh64_next_free_dtlb_entry - Find the next available DTLB entry
- */
-unsigned long long sh64_next_free_dtlb_entry(void)
-{
- return cpu_data->dtlb.next;
-}
-
-/**
- * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
- */
-unsigned long long sh64_get_wired_dtlb_entry(void)
-{
- unsigned long long entry = sh64_next_free_dtlb_entry();
-
- cpu_data->dtlb.first += cpu_data->dtlb.step;
- cpu_data->dtlb.next += cpu_data->dtlb.step;
-
- return entry;
-}
-
-/**
- * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
- *
- * @entry: Address of TLB slot.
- *
- * Works like a stack, last one to allocate must be first one to free.
- */
-int sh64_put_wired_dtlb_entry(unsigned long long entry)
-{
- __flush_tlb_slot(entry);
-
- /*
- * We don't do any particularly useful tracking of wired entries,
- * so this approach works like a stack .. last one to be allocated
- * has to be the first one to be freed.
- *
- * We could potentially load wired entries into a list and work on
- * rebalancing the list periodically (which also entails moving the
- * contents of a TLB entry) .. though I have a feeling that this is
- * more trouble than it's worth.
- */
-
- /*
- * Entry must be valid .. we don't want any ITLB addresses!
- */
- if (entry <= DTLB_FIXED)
- return -EINVAL;
-
- /*
- * Next, check if we're within range to be freed. (ie, must be the
- * entry beneath the first 'free' entry!
- */
- if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step))
- return -EINVAL;
-
- /* If we are, then bring this entry back into the list */
- cpu_data->dtlb.first -= cpu_data->dtlb.step;
- cpu_data->dtlb.next = entry;
-
- return 0;
-}
-
-/**
- * sh64_setup_tlb_slot - Load up a translation in a wired slot.
- *
- * @config_addr: Address of TLB slot.
- * @eaddr: Virtual address.
- * @asid: Address Space Identifier.
- * @paddr: Physical address.
- *
- * Load up a virtual<->physical translation for @eaddr<->@paddr in the
- * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
- */
-void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
- unsigned long asid, unsigned long paddr)
-{
- unsigned long long pteh, ptel;
-
- pteh = neff_sign_extend(eaddr);
- pteh &= PAGE_MASK;
- pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
- ptel = neff_sign_extend(paddr);
- ptel &= PAGE_MASK;
- ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
-
- asm volatile("putcfg %0, 1, %1\n\t"
- "putcfg %0, 0, %2\n"
- : : "r" (config_addr), "r" (ptel), "r" (pteh));
-}
-
-/**
- * sh64_teardown_tlb_slot - Teardown a translation.
- *
- * @config_addr: Address of TLB slot.
- *
- * Teardown any existing mapping in the TLB slot @config_addr.
- */
-void sh64_teardown_tlb_slot(unsigned long long config_addr)
- __attribute__ ((alias("__flush_tlb_slot")));
-
-static int dtlb_entry;
-static unsigned long long dtlb_entries[64];
-
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
- unsigned long long entry;
- unsigned long paddr, flags;
-
- BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
-
- local_irq_save(flags);
-
- entry = sh64_get_wired_dtlb_entry();
- dtlb_entries[dtlb_entry++] = entry;
-
- paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
- paddr &= ~PAGE_MASK;
-
- sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
-
- local_irq_restore(flags);
-}
-
-void tlb_unwire_entry(void)
-{
- unsigned long long entry;
- unsigned long flags;
-
- BUG_ON(!dtlb_entry);
-
- local_irq_save(flags);
- entry = dtlb_entries[dtlb_entry--];
-
- sh64_teardown_tlb_slot(entry);
- sh64_put_wired_dtlb_entry(entry);
-
- local_irq_restore(flags);
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long long ptel;
- unsigned long long pteh=0;
- struct tlb_info *tlbp;
- unsigned long long next;
- unsigned int fault_code = get_thread_fault_code();
-
- /* Get PTEL first */
- ptel = pte.pte_low;
-
- /*
- * Set PTEH register
- */
- pteh = neff_sign_extend(address & MMU_VPN_MASK);
-
- /* Set the ASID. */
- pteh |= get_asid() << PTEH_ASID_SHIFT;
- pteh |= PTEH_VALID;
-
- /* Set PTEL register, set_pte has performed the sign extension */
- ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-
- if (fault_code & FAULT_CODE_ITLB)
- tlbp = &cpu_data->itlb;
- else
- tlbp = &cpu_data->dtlb;
-
- next = tlbp->next;
- __flush_tlb_slot(next);
- asm volatile ("putcfg %0,1,%2\n\n\t"
- "putcfg %0,0,%1\n"
- : : "r" (next), "r" (pteh), "r" (ptel) );
-
- next += TLB_STEP;
- if (next > tlbp->last)
- next = tlbp->first;
- tlbp->next = next;
-}
diff --git a/arch/sh/mm/tlbex_64.c b/arch/sh/mm/tlbex_64.c
deleted file mode 100644
index 8ff966dd0c74..000000000000
--- a/arch/sh/mm/tlbex_64.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * The SH64 TLB miss.
- *
- * Original code from fault.c
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * Fast PTE->TLB refill path
- * Copyright (C) 2003 Richard.Curnow@superh.com
- *
- * IMPORTANT NOTES :
- * The do_fast_page_fault function is called from a context in entry.S
- * where very few registers have been saved. In particular, the code in
- * this file must be compiled not to use ANY caller-save registers that
- * are not part of the restricted save set. Also, it means that code in
- * this file must not make calls to functions elsewhere in the kernel, or
- * else the excepting context will see corruption in its caller-save
- * registers. Plus, the entry.S save area is non-reentrant, so this code
- * has to run with SR.BL==1, i.e. no interrupts taken inside it and panic
- * on any exception.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kprobes.h>
-#include <asm/tlb.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-
-static int handle_tlbmiss(unsigned long long protection_flags,
- unsigned long address)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
-
- if (is_vmalloc_addr((void *)address)) {
- pgd = pgd_offset_k(address);
- } else {
- if (unlikely(address >= TASK_SIZE || !current->mm))
- return 1;
-
- pgd = pgd_offset(current->mm, address);
- }
-
- pud = pud_offset(pgd, address);
- if (pud_none(*pud) || !pud_present(*pud))
- return 1;
-
- pmd = pmd_offset(pud, address);
- if (pmd_none(*pmd) || !pmd_present(*pmd))
- return 1;
-
- pte = pte_offset_kernel(pmd, address);
- entry = *pte;
- if (pte_none(entry) || !pte_present(entry))
- return 1;
-
- /*
- * If the page doesn't have sufficient protection bits set to
- * service the kind of fault being handled, there's not much
- * point doing the TLB refill. Punt the fault to the general
- * handler.
- */
- if ((pte_val(entry) & protection_flags) != protection_flags)
- return 1;
-
- update_mmu_cache(NULL, address, pte);
-
- return 0;
-}
-
-/*
- * Put all this information into one structure so that everything is just
- * arithmetic relative to a single base address. This reduces the number
- * of movi/shori pairs needed just to load addresses of static data.
- */
-struct expevt_lookup {
- unsigned short protection_flags[8];
- unsigned char is_text_access[8];
- unsigned char is_write_access[8];
-};
-
-#define PRU (1<<9)
-#define PRW (1<<8)
-#define PRX (1<<7)
-#define PRR (1<<6)
-
-/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether
- the fault happened in user mode or privileged mode. */
-static struct expevt_lookup expevt_lookup_table = {
- .protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW},
- .is_text_access = {1, 1, 0, 0, 0, 0, 0, 0}
-};
-
-static inline unsigned int
-expevt_to_fault_code(unsigned long expevt)
-{
- if (expevt == 0xa40)
- return FAULT_CODE_ITLB;
- else if (expevt == 0x060)
- return FAULT_CODE_WRITE;
-
- return 0;
-}
-
-/*
- This routine handles page faults that can be serviced just by refilling a
- TLB entry from an existing page table entry. (This case represents a very
- large majority of page faults.) Return 1 if the fault was successfully
- handled. Return 0 if the fault could not be handled. (This leads into the
- general fault handling in fault.c which deals with mapping file-backed
- pages, stack growth, segmentation faults, swapping etc etc)
- */
-asmlinkage int __kprobes
-do_fast_page_fault(unsigned long long ssr_md, unsigned long long expevt,
- unsigned long address)
-{
- unsigned long long protection_flags;
- unsigned long long index;
- unsigned long long expevt4;
- unsigned int fault_code;
-
- /* The next few lines implement a way of hashing EXPEVT into a
- * small array index which can be used to lookup parameters
- * specific to the type of TLBMISS being handled.
- *
- * Note:
- * ITLBMISS has EXPEVT==0xa40
- * RTLBMISS has EXPEVT==0x040
- * WTLBMISS has EXPEVT==0x060
- */
- expevt4 = (expevt >> 4);
- /* TODO : xor ssr_md into this expression too. Then we can check
- * that PRU is set when it needs to be. */
- index = expevt4 ^ (expevt4 >> 5);
- index &= 7;
-
- fault_code = expevt_to_fault_code(expevt);
-
- protection_flags = expevt_lookup_table.protection_flags[index];
-
- if (expevt_lookup_table.is_text_access[index])
- fault_code |= FAULT_CODE_ITLB;
- if (!ssr_md)
- fault_code |= FAULT_CODE_USER;
-
- set_thread_fault_code(fault_code);
-
- return handle_tlbmiss(protection_flags, address);
-}
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
deleted file mode 100644
index bd0715d5dca4..000000000000
--- a/arch/sh/mm/tlbflush_64.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/sh/mm/tlb-flush_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/signal.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/perf_event.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/tlb.h>
-#include <linux/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long long match, pteh=0, lpage;
- unsigned long tlb;
-
- /*
- * Sign-extend based on neff.
- */
- lpage = neff_sign_extend(page);
- match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
- match |= lpage;
-
- for_each_itlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- if (pteh == match) {
- __flush_tlb_slot(tlb);
- break;
- }
- }
-
- for_each_dtlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- if (pteh == match) {
- __flush_tlb_slot(tlb);
- break;
- }
-
- }
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned long flags;
-
- if (vma->vm_mm) {
- page &= PAGE_MASK;
- local_irq_save(flags);
- local_flush_tlb_one(get_asid(), page);
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- unsigned long flags;
- unsigned long long match, pteh=0, pteh_epn, pteh_low;
- unsigned long tlb;
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm;
-
- mm = vma->vm_mm;
- if (cpu_context(cpu, mm) == NO_CONTEXT)
- return;
-
- local_irq_save(flags);
-
- start &= PAGE_MASK;
- end &= PAGE_MASK;
-
- match = (cpu_asid(cpu, mm) << PTEH_ASID_SHIFT) | PTEH_VALID;
-
- /* Flush ITLB */
- for_each_itlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- pteh_epn = pteh & PAGE_MASK;
- pteh_low = pteh & ~PAGE_MASK;
-
- if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
- __flush_tlb_slot(tlb);
- }
-
- /* Flush DTLB */
- for_each_dtlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- pteh_epn = pteh & PAGE_MASK;
- pteh_low = pteh & ~PAGE_MASK;
-
- if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
- __flush_tlb_slot(tlb);
- }
-
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- unsigned long flags;
- unsigned int cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) == NO_CONTEXT)
- return;
-
- local_irq_save(flags);
-
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
-
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
- /* Invalidate all, including shared pages, excluding fixed TLBs */
- unsigned long flags, tlb;
-
- local_irq_save(flags);
-
- /* Flush each ITLB entry */
- for_each_itlb_entry(tlb)
- __flush_tlb_slot(tlb);
-
- /* Flush each DTLB entry */
- for_each_dtlb_entry(tlb)
- __flush_tlb_slot(tlb);
-
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- /* FIXME: Optimize this later.. */
- flush_tlb_all();
-}
-
-void __flush_tlb_global(void)
-{
- flush_tlb_all();
-}