sh: migrate to arch/sh/include/

This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 366 insertions, 0 deletions

diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
new file mode 100644
index 000000000000..a4fbf0c84fb1
--- /dev/null
+++ b/arch/sh/include/asm/io.h
@@ -0,0 +1,366 @@
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+/*
+ * Convention:
+ *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    while in{b,w,l}/out{b,w,l} are for ISA
+ * These may (will) be platform specific function.
+ * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
+ * and 'string' versions: ins{b,w,l}/outs{b,w,l}
+ * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
+ * do not have a memory barrier after them.
+ *
+ * In addition, we have
+ *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
+ *   which are processor specific.
+ */
+
+/*
+ * We follow the Alpha convention here:
+ *  __inb expands to an inline function call (which calls via the mv)
+ *  _inb  is a real function call (note ___raw fns are _ version of __raw)
+ *  inb   by default expands to _inb, but the machine specific code may
+ *        define it to __inb if it chooses.
+ */
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/machvec.h>
+#include <asm/pgtable.h>
+#include <asm-generic/iomap.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Depending on which platform we are running on, we need different
+ * I/O functions.
+ */
+#define __IO_PREFIX	generic
+#include <asm/io_generic.h>
+#include <asm/io_trapped.h>
+
+#define maybebadio(port) \
+  printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
+	 __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
+
+/*
+ * Since boards are able to define their own set of I/O routines through
+ * their respective machine vector, we always wrap through the mv.
+ *
+ * Also, in the event that a board hasn't provided its own definition for
+ * a given routine, it will be wrapped to generic code at run-time.
+ */
+
+#define __inb(p)	sh_mv.mv_inb((p))
+#define __inw(p)	sh_mv.mv_inw((p))
+#define __inl(p)	sh_mv.mv_inl((p))
+#define __outb(x,p)	sh_mv.mv_outb((x),(p))
+#define __outw(x,p)	sh_mv.mv_outw((x),(p))
+#define __outl(x,p)	sh_mv.mv_outl((x),(p))
+
+#define __inb_p(p)	sh_mv.mv_inb_p((p))
+#define __inw_p(p)	sh_mv.mv_inw_p((p))
+#define __inl_p(p)	sh_mv.mv_inl_p((p))
+#define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
+#define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
+#define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
+
+#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
+#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
+#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
+#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
+#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
+#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
+
+#define __readb(a)	sh_mv.mv_readb((a))
+#define __readw(a)	sh_mv.mv_readw((a))
+#define __readl(a)	sh_mv.mv_readl((a))
+#define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
+#define __writew(v,a)	sh_mv.mv_writew((v),(a))
+#define __writel(v,a)	sh_mv.mv_writel((v),(a))
+
+#define inb		__inb
+#define inw		__inw
+#define inl		__inl
+#define outb		__outb
+#define outw		__outw
+#define outl		__outl
+
+#define inb_p		__inb_p
+#define inw_p		__inw_p
+#define inl_p		__inl_p
+#define outb_p		__outb_p
+#define outw_p		__outw_p
+#define outl_p		__outl_p
+
+#define insb		__insb
+#define insw		__insw
+#define insl		__insl
+#define outsb		__outsb
+#define outsw		__outsw
+#define outsl		__outsl
+
+#define __raw_readb(a)		__readb((void __iomem *)(a))
+#define __raw_readw(a)		__readw((void __iomem *)(a))
+#define __raw_readl(a)		__readl((void __iomem *)(a))
+#define __raw_writeb(v, a)	__writeb(v, (void __iomem *)(a))
+#define __raw_writew(v, a)	__writew(v, (void __iomem *)(a))
+#define __raw_writel(v, a)	__writel(v, (void __iomem *)(a))
+
+void __raw_writesl(unsigned long addr, const void *data, int longlen);
+void __raw_readsl(unsigned long addr, void *data, int longlen);
+
+/*
+ * The platform header files may define some of these macros to use
+ * the inlined versions where appropriate.  These macros may also be
+ * redefined by userlevel programs.
+ */
+#ifdef __readb
+# define readb(a)	({ unsigned int r_ = __raw_readb(a); mb(); r_; })
+#endif
+#ifdef __raw_readw
+# define readw(a)	({ unsigned int r_ = __raw_readw(a); mb(); r_; })
+#endif
+#ifdef __raw_readl
+# define readl(a)	({ unsigned int r_ = __raw_readl(a); mb(); r_; })
+#endif
+
+#ifdef __raw_writeb
+# define writeb(v,a)	({ __raw_writeb((v),(a)); mb(); })
+#endif
+#ifdef __raw_writew
+# define writew(v,a)	({ __raw_writew((v),(a)); mb(); })
+#endif
+#ifdef __raw_writel
+# define writel(v,a)	({ __raw_writel((v),(a)); mb(); })
+#endif
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__raw_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __raw_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_MEMORY_STRING(b, u8)
+__BUILD_MEMORY_STRING(w, u16)
+#define writesl __raw_writesl
+#define readsl  __raw_readsl
+
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+
+/* Simple MMIO */
+#define ioread8(a)		readb(a)
+#define ioread16(a)		readw(a)
+#define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
+#define ioread32(a)		readl(a)
+#define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
+
+#define iowrite8(v,a)		writeb((v),(a))
+#define iowrite16(v,a)		writew((v),(a))
+#define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
+#define iowrite32(v,a)		writel((v),(a))
+#define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
+
+#define ioread8_rep(a, d, c)	readsb((a), (d), (c))
+#define ioread16_rep(a, d, c)	readsw((a), (d), (c))
+#define ioread32_rep(a, d, c)	readsl((a), (d), (c))
+
+#define iowrite8_rep(a, s, c)	writesb((a), (s), (c))
+#define iowrite16_rep(a, s, c)	writesw((a), (s), (c))
+#define iowrite32_rep(a, s, c)	writesl((a), (s), (c))
+
+#define mmiowb()	wmb()	/* synco on SH-4A, otherwise a nop */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * This function provides a method for the generic case where a board-specific
+ * ioport_map simply needs to return the port + some arbitrary port base.
+ *
+ * We use this at board setup time to implicitly set the port base, and
+ * as a result, we can use the generic ioport_map.
+ */
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	extern unsigned long generic_io_base;
+
+	generic_io_base = pbase;
+}
+
+#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
+
+/* We really want to try and get these to memcpy etc */
+extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
+extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+extern void memset_io(volatile void __iomem *, int, unsigned long);
+
+/* SuperH on-chip I/O functions */
+static inline unsigned char ctrl_inb(unsigned long addr)
+{
+	return *(volatile unsigned char*)addr;
+}
+
+static inline unsigned short ctrl_inw(unsigned long addr)
+{
+	return *(volatile unsigned short*)addr;
+}
+
+static inline unsigned int ctrl_inl(unsigned long addr)
+{
+	return *(volatile unsigned long*)addr;
+}
+
+static inline unsigned long long ctrl_inq(unsigned long addr)
+{
+	return *(volatile unsigned long long*)addr;
+}
+
+static inline void ctrl_outb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char*)addr = b;
+}
+
+static inline void ctrl_outw(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)addr = b;
+}
+
+static inline void ctrl_outl(unsigned int b, unsigned long addr)
+{
+        *(volatile unsigned long*)addr = b;
+}
+
+static inline void ctrl_outq(unsigned long long b, unsigned long addr)
+{
+	*(volatile unsigned long long*)addr = b;
+}
+
+static inline void ctrl_delay(void)
+{
+#ifdef P2SEG
+	ctrl_inw(P2SEG);
+#endif
+}
+
+/* Quad-word real-mode I/O, don't ask.. */
+unsigned long long peek_real_address_q(unsigned long long addr);
+unsigned long long poke_real_address_q(unsigned long long addr,
+				       unsigned long long val);
+
+#if !defined(CONFIG_MMU)
+#define virt_to_phys(address)	((unsigned long)(address))
+#define phys_to_virt(address)	((void *)(address))
+#else
+#define virt_to_phys(address)	(__pa(address))
+#define phys_to_virt(address)	(__va(address))
+#endif
+
+/*
+ * On 32-bit SH, we traditionally have the whole physical address space
+ * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
+ * not need to do anything but place the address in the proper segment.
+ * This is true for P1 and P2 addresses, as well as some P3 ones.
+ * However, most of the P3 addresses and newer cores using extended
+ * addressing need to map through page tables, so the ioremap()
+ * implementation becomes a bit more complicated.
+ *
+ * See arch/sh/mm/ioremap.c for additional notes on this.
+ *
+ * We cheat a bit and always return uncachable areas until we've fixed
+ * the drivers to handle caching properly.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
+ * doesn't exist, so everything must go through page tables.
+ */
+#ifdef CONFIG_MMU
+void __iomem *__ioremap(unsigned long offset, unsigned long size,
+			unsigned long flags);
+void __iounmap(void __iomem *addr);
+
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+			   const char *name);
+extern void onchip_unmap(unsigned long vaddr);
+#else
+#define __ioremap(offset, size, flags)	((void __iomem *)(offset))
+#define __iounmap(addr)			do { } while (0)
+#define onchip_remap(addr, size, name)	(addr)
+#define onchip_unmap(addr)		do { } while (0)
+#endif /* CONFIG_MMU */
+
+static inline void __iomem *
+__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
+{
+#ifdef CONFIG_SUPERH32
+	unsigned long last_addr = offset + size - 1;
+#endif
+	void __iomem *ret;
+
+	ret = __ioremap_trapped(offset, size);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_SUPERH32
+	/*
+	 * For P1 and P2 space this is trivial, as everything is already
+	 * mapped. Uncached access for P1 addresses are done through P2.
+	 * In the P3 case or for addresses outside of the 29-bit space,
+	 * mapping must be done by the PMB or by using page tables.
+	 */
+	if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
+		if (unlikely(flags & _PAGE_CACHABLE))
+			return (void __iomem *)P1SEGADDR(offset);
+
+		return (void __iomem *)P2SEGADDR(offset);
+	}
+#endif
+
+	return __ioremap(offset, size, flags);
+}
+
+#define ioremap(offset, size)				\
+	__ioremap_mode((offset), (size), 0)
+#define ioremap_nocache(offset, size)			\
+	__ioremap_mode((offset), (size), 0)
+#define ioremap_cache(offset, size)			\
+	__ioremap_mode((offset), (size), _PAGE_CACHABLE)
+#define p3_ioremap(offset, size, flags)			\
+	__ioremap((offset), (size), (flags))
+#define iounmap(addr)					\
+	__iounmap((addr))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_IO_H */