MIPS: Remove NETLOGIC support

No (active) developer owns this hardware, so let's remove Linux support.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

1 files changed, 2 insertions, 89 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 35aab081917f..0610a7bb8a7a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -994,60 +994,6 @@ config CAVIUM_OCTEON_SOC
 		Hikari
 	  Say Y here for most Octeon reference boards.
 
-config NLM_XLR_BOARD
-	bool "Netlogic XLR/XLS based systems"
-	select BOOT_ELF32
-	select NLM_COMMON
-	select SYS_HAS_CPU_XLR
-	select SYS_SUPPORTS_SMP
-	select HAVE_PCI
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select PHYS_ADDR_T_64BIT
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select NR_CPUS_DEFAULT_32
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_MIPS_CPU
-	select ZONE_DMA32 if 64BIT
-	select SYNC_R4K
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_ZBOOT
-	select SYS_SUPPORTS_ZBOOT_UART16550
-	help
-	  Support for systems based on Netlogic XLR and XLS processors.
-	  Say Y here if you have a XLR or XLS based board.
-
-config NLM_XLP_BOARD
-	bool "Netlogic XLP based systems"
-	select BOOT_ELF32
-	select NLM_COMMON
-	select SYS_HAS_CPU_XLP
-	select SYS_SUPPORTS_SMP
-	select HAVE_PCI
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select PHYS_ADDR_T_64BIT
-	select GPIOLIB
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select NR_CPUS_DEFAULT_32
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_MIPS_CPU
-	select ZONE_DMA32 if 64BIT
-	select SYNC_R4K
-	select SYS_HAS_EARLY_PRINTK
-	select USE_OF
-	select SYS_SUPPORTS_ZBOOT
-	select SYS_SUPPORTS_ZBOOT_UART16550
-	help
-	  This board is based on Netlogic XLP Processor.
-	  Say Y here if you have a XLP based board.
-
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1070,7 +1016,6 @@ source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson2ef/Kconfig"
 source "arch/mips/loongson32/Kconfig"
 source "arch/mips/loongson64/Kconfig"
-source "arch/mips/netlogic/Kconfig"
 
 endmenu
 
@@ -1786,32 +1731,6 @@ config CPU_BMIPS
 	help
 	  Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
 
-config CPU_XLR
-	bool "Netlogic XLR SoC"
-	depends on SYS_HAS_CPU_XLR
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
-	select CPU_SUPPORTS_HUGEPAGES
-	select WEAK_ORDERING
-	select WEAK_REORDERING_BEYOND_LLSC
-	help
-	  Netlogic Microsystems XLR/XLS processors.
-
-config CPU_XLP
-	bool "Netlogic XLP SoC"
-	depends on SYS_HAS_CPU_XLP
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
-	select WEAK_ORDERING
-	select WEAK_REORDERING_BEYOND_LLSC
-	select CPU_HAS_PREFETCH
-	select CPU_MIPSR2
-	select CPU_SUPPORTS_HUGEPAGES
-	select MIPS_ASID_BITS_VARIABLE
-	help
-	  Netlogic Microsystems XLP processors.
 endchoice
 
 config CPU_MIPS32_3_5_FEATURES
@@ -2058,12 +1977,6 @@ config SYS_HAS_CPU_BMIPS5000
 	select SYS_HAS_CPU_BMIPS
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 
-config SYS_HAS_CPU_XLR
-	bool
-
-config SYS_HAS_CPU_XLP
-	bool
-
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -2158,7 +2071,7 @@ config CPU_SUPPORTS_HUGEPAGES
 config MIPS_PGD_C0_CONTEXT
 	bool
 	depends on 64BIT
-	default y if (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP
+	default y if (CPU_MIPSR2 || CPU_MIPSR6)
 
 #
 # Set to y for ptrace access to watch registers.
@@ -2841,7 +2754,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
+	depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_LOONGSON64)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If