Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 320 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
new file mode 100644
index 000000000000..f691cf77d390
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi.c
@@ -0,0 +1,320 @@
+/*
+ * Support for Sharp SL-C7xx PDAs
+ * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches/lubbock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irq.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/corgi.h>
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+#include <video/w100fb.h>
+
+#include "generic.h"
+
+
+/*
+ * Corgi SCOOP Device
+ */
+static struct resource corgi_scoop_resources[] = {
+	[0] = {
+		.start		= 0x10800000,
+		.end		= 0x10800fff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct scoop_config corgi_scoop_setup = {
+	.io_dir 	= CORGI_SCOOP_IO_DIR,
+	.io_out		= CORGI_SCOOP_IO_OUT,
+};
+
+struct platform_device corgiscoop_device = {
+	.name		= "sharp-scoop",
+	.id		= -1,
+	.dev		= {
+ 		.platform_data	= &corgi_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
+	.resource	= corgi_scoop_resources,
+};
+
+
+/*
+ * Corgi SSP Device
+ *
+ * Set the parent as the scoop device because a lot of SSP devices
+ * also use scoop functions and this makes the power up/down order
+ * work correctly.
+ */
+static struct platform_device corgissp_device = {
+	.name		= "corgi-ssp",
+	.dev		= {
+ 		.parent = &corgiscoop_device.dev,
+	},
+	.id		= -1,
+};
+
+
+/*
+ * Corgi w100 Frame Buffer Device
+ */
+static struct w100fb_mach_info corgi_fb_info = {
+	.w100fb_ssp_send 	= corgi_ssp_lcdtg_send,
+	.comadj 			= -1,
+	.phadadj 			= -1,
+};
+
+static struct resource corgi_fb_resources[] = {
+	[0] = {
+		.start		= 0x08000000,
+		.end		= 0x08ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device corgifb_device = {
+	.name		= "w100fb",
+	.id		= -1,
+	.dev		= {
+ 		.platform_data	= &corgi_fb_info,
+ 		.parent = &corgissp_device.dev,
+	},
+	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
+	.resource	= corgi_fb_resources,
+};
+
+
+/*
+ * Corgi Backlight Device
+ */
+static struct platform_device corgibl_device = {
+	.name		= "corgi-bl",
+	.dev		= {
+ 		.parent = &corgifb_device.dev,
+	},
+	.id		= -1,
+};
+
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by HZ/4
+ * to give the card a chance to fully insert/eject.
+ */
+static struct mmc_detect {
+	struct timer_list detect_timer;
+	void *devid;
+} mmc_detect;
+
+static void mmc_detect_callback(unsigned long data)
+{
+	mmc_detect_change(mmc_detect.devid);
+}
+
+static irqreturn_t corgi_mmc_detect_int(int irq, void *devid, struct pt_regs *regs)
+{
+	mmc_detect.devid=devid;
+	mod_timer(&mmc_detect.detect_timer, jiffies + HZ/4);
+	return IRQ_HANDLED;
+}
+
+static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+	int err;
+
+	/* setup GPIO for PXA25x MMC controller	*/
+	pxa_gpio_mode(GPIO6_MMCCLK_MD);
+	pxa_gpio_mode(GPIO8_MMCCS0_MD);
+	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
+	pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+
+	init_timer(&mmc_detect.detect_timer);
+	mmc_detect.detect_timer.function = mmc_detect_callback;
+	mmc_detect.detect_timer.data = (unsigned long) &mmc_detect;
+
+	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_mmc_detect_int, SA_INTERRUPT,
+			     "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		return -1;
+	}
+
+	set_irq_type(CORGI_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
+
+	return 0;
+}
+
+static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+	} else {
+		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+	}
+}
+
+static void corgi_mci_exit(struct device *dev, void *data)
+{
+	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+	del_timer(&mmc_detect.detect_timer);
+}
+
+static struct pxamci_platform_data corgi_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= corgi_mci_init,
+	.setpower 	= corgi_mci_setpower,
+	.exit		= corgi_mci_exit,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static void corgi_udc_command(int cmd)
+{
+	switch(cmd)	{
+	case PXA2XX_UDC_CMD_CONNECT:
+		GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	/* no connect GPIO; corgi can't tell connection status */
+	.udc_command		= corgi_udc_command,
+};
+
+
+static struct platform_device *devices[] __initdata = {
+	&corgiscoop_device,
+	&corgissp_device,
+	&corgifb_device,
+	&corgibl_device,
+};
+
+static void __init corgi_init(void)
+{
+	corgi_fb_info.comadj=sharpsl_param.comadj;
+	corgi_fb_info.phadadj=sharpsl_param.phadadj;
+
+	pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
+ 	pxa_set_udc_info(&udc_info);
+	pxa_set_mci_info(&corgi_mci_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init fixup_corgi(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	sharpsl_save_param();
+	mi->nr_banks=1;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	if (machine_is_corgi())
+		mi->bank[0].size = (32*1024*1024);
+	else
+		mi->bank[0].size = (64*1024*1024);
+}
+
+static void __init corgi_init_irq(void)
+{
+	pxa_init_irq();
+}
+
+static struct map_desc corgi_io_desc[] __initdata = {
+/*    virtual     physical    length      */
+/*	{ 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */
+/*	{ 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/  /* SCOOP */
+	{ 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
+};
+
+static void __init corgi_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
+
+	/* setup sleep mode values */
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x0158C000;
+	PGSR1 = 0x00FF0080;
+	PGSR2 = 0x0001C004;
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR |= PCFR_OPDE;
+}
+
+#ifdef CONFIG_MACH_CORGI
+MACHINE_START(CORGI, "SHARP Corgi")
+	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
+	FIXUP(fixup_corgi)
+	MAPIO(corgi_map_io)
+	INITIRQ(corgi_init_irq)
+	.init_machine = corgi_init,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SHEPHERD
+MACHINE_START(SHEPHERD, "SHARP Shepherd")
+	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
+	FIXUP(fixup_corgi)
+	MAPIO(corgi_map_io)
+	INITIRQ(corgi_init_irq)
+	.init_machine = corgi_init,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_HUSKY
+MACHINE_START(HUSKY, "SHARP Husky")
+	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
+	FIXUP(fixup_corgi)
+	MAPIO(corgi_map_io)
+	INITIRQ(corgi_init_irq)
+	.init_machine = corgi_init,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+