OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h

At this point in time, there's no reason for this header file to be in
plat-omap/include/plat/voltage.h.  It should not be included by device
drivers, and the code that uses it is currently all under mach-omap2/.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 155 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
new file mode 100644
index 000000000000..5bd204e55c32
--- /dev/null
+++ b/arch/arm/mach-omap2/voltage.h
@@ -0,0 +1,155 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+
+#include <linux/err.h>
+
+#define VOLTSCALE_VPFORCEUPDATE		1
+#define VOLTSCALE_VCBYPASS		2
+
+/*
+ * OMAP3 GENERIC setup times. Revisit to see if these needs to be
+ * passed from board or PMIC file
+ */
+#define OMAP3_CLKSETUP		0xff
+#define OMAP3_VOLTOFFSET	0xff
+#define OMAP3_VOLTSETUP2	0xff
+
+/* Voltage value defines */
+#define OMAP3430_VDD_MPU_OPP1_UV		975000
+#define OMAP3430_VDD_MPU_OPP2_UV		1075000
+#define OMAP3430_VDD_MPU_OPP3_UV		1200000
+#define OMAP3430_VDD_MPU_OPP4_UV		1270000
+#define OMAP3430_VDD_MPU_OPP5_UV		1350000
+
+#define OMAP3430_VDD_CORE_OPP1_UV		975000
+#define OMAP3430_VDD_CORE_OPP2_UV		1050000
+#define OMAP3430_VDD_CORE_OPP3_UV		1150000
+
+#define OMAP3630_VDD_MPU_OPP50_UV		1012500
+#define OMAP3630_VDD_MPU_OPP100_UV		1200000
+#define OMAP3630_VDD_MPU_OPP120_UV		1325000
+#define OMAP3630_VDD_MPU_OPP1G_UV		1375000
+
+#define OMAP3630_VDD_CORE_OPP50_UV		1000000
+#define OMAP3630_VDD_CORE_OPP100_UV		1200000
+
+#define OMAP4430_VDD_MPU_OPP50_UV		930000
+#define OMAP4430_VDD_MPU_OPP100_UV		1100000
+#define OMAP4430_VDD_MPU_OPPTURBO_UV		1260000
+#define OMAP4430_VDD_MPU_OPPNITRO_UV		1350000
+
+#define OMAP4430_VDD_IVA_OPP50_UV		930000
+#define OMAP4430_VDD_IVA_OPP100_UV		1100000
+#define OMAP4430_VDD_IVA_OPPTURBO_UV		1260000
+
+#define OMAP4430_VDD_CORE_OPP50_UV		930000
+#define OMAP4430_VDD_CORE_OPP100_UV		1100000
+
+/**
+ * struct voltagedomain - omap voltage domain global structure.
+ * @name:	Name of the voltage domain which can be used as a unique
+ *		identifier.
+ */
+struct voltagedomain {
+	char *name;
+};
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal:	The possible voltage value in uV
+ * @sr_efuse_offs:	The offset of the efuse register(from system
+ *			control module base address) from where to read
+ *			the n-target value for the smartreflex module.
+ * @sr_errminlimit:	Error min limit value for smartreflex. This value
+ *			differs at differnet opp and thus is linked
+ *			with voltage.
+ * @vp_errorgain:	Error gain value for the voltage processor. This
+ *			field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+	u32	volt_nominal;
+	u32	sr_efuse_offs;
+	u8	sr_errminlimit;
+	u8	vp_errgain;
+};
+
+/**
+ * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * @slew_rate:	PMIC slew rate (in uv/us)
+ * @step_size:	PMIC voltage step size (in uv)
+ * @vsel_to_uv:	PMIC API to convert vsel value to actual voltage in uV.
+ * @uv_to_vsel:	PMIC API to convert voltage in uV to vsel value.
+ */
+struct omap_volt_pmic_info {
+	int slew_rate;
+	int step_size;
+	u32 on_volt;
+	u32 onlp_volt;
+	u32 ret_volt;
+	u32 off_volt;
+	u16 volt_setup_time;
+	u8 vp_erroroffset;
+	u8 vp_vstepmin;
+	u8 vp_vstepmax;
+	u8 vp_vddmin;
+	u8 vp_vddmax;
+	u8 vp_timeout_us;
+	u8 i2c_slave_addr;
+	u8 pmic_reg;
+	unsigned long (*vsel_to_uv) (const u8 vsel);
+	u8 (*uv_to_vsel) (unsigned long uV);
+};
+
+unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
+		unsigned long target_volt);
+void omap_voltage_reset(struct voltagedomain *voltdm);
+void omap_voltage_get_volttable(struct voltagedomain *voltdm,
+		struct omap_volt_data **volt_data);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt);
+unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
+struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
+#ifdef CONFIG_PM
+int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info);
+void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method);
+/* API to get the voltagedomain pointer */
+struct voltagedomain *omap_voltage_domain_lookup(char *name);
+
+int omap_voltage_late_init(void);
+#else
+static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info)
+{
+	return -EINVAL;
+}
+static inline  void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method) {}
+static inline int omap_voltage_late_init(void)
+{
+	return -EINVAL;
+}
+static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+#endif