OMAP2+: powerdomains: move powerdomain static data to .c files

Static data should be declared in .c files, not .h files.  It should be
possible to #include .h files at any point without creating multiple
copies of the same data.

We converted the clock data to .c files some time ago.  This patch does
the same for the powerdomain data.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>

1 files changed, 288 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
new file mode 100644
index 000000000000..1ddc040d7bc0
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -0,0 +1,288 @@
+/*
+ * OMAP3 powerdomain definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <plat/powerdomain.h>
+#include "powerdomains2xxx_3xxx_data.h"
+#include "powerdomains.h"
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * 34XX-specific powerdomains, dependencies
+ */
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/*
+ * Powerdomains
+ */
+
+static struct powerdomain iva2_pwrdm = {
+	.name		  = "iva2_pwrdm",
+	.prcm_offs	  = OMAP3430_IVA2_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 4,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,
+		[1] = PWRSTS_OFF_RET,
+		[2] = PWRSTS_OFF_RET,
+		[3] = PWRSTS_OFF_RET,
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,
+		[1] = PWRDM_POWER_ON,
+		[2] = PWRSTS_OFF_ON,
+		[3] = PWRDM_POWER_ON,
+	},
+};
+
+static struct powerdomain mpu_3xxx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.prcm_offs	  = MPU_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.flags		  = PWRDM_HAS_MPU_QUIRK,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_ON,
+	},
+};
+
+/*
+ * The USBTLL Save-and-Restore mechanism is broken on
+ * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * needs to be disabled on these chips.
+ * Refer: 3430 errata ID i459 and 3630 errata ID i579
+ *
+ * Note: setting the SAR flag could help for errata ID i478
+ *  which applies to 3430 <= ES3.1, but since the SAR feature
+ *  is broken, do not use it.
+ */
+static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
+					   CHIP_IS_OMAP3430ES2 |
+					   CHIP_IS_OMAP3430ES3_0 |
+					   CHIP_IS_OMAP3630ES1),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 2,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
+		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+	},
+};
+
+static struct powerdomain core_3xxx_es3_1_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
+					  CHIP_GE_OMAP3630ES1_1),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	/*
+	 * Setting the SAR flag for errata ID i478 which applies
+	 *  to 3430 <= ES3.1
+	 */
+	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
+	.banks		  = 2,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
+		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+	},
+};
+
+static struct powerdomain dss_pwrdm = {
+	.name		  = "dss_pwrdm",
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.prcm_offs	  = OMAP3430_DSS_MOD,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+/*
+ * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
+ * possible SGX powerstate, the SGX device itself does not support
+ * retention.
+ */
+static struct powerdomain sgx_pwrdm = {
+	.name		  = "sgx_pwrdm",
+	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+	/* XXX This is accurate for 3430 SGX, but what about GFX? */
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain cam_pwrdm = {
+	.name		  = "cam_pwrdm",
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.prcm_offs	  = OMAP3430_CAM_MOD,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain per_pwrdm = {
+	.name		  = "per_pwrdm",
+	.prcm_offs	  = OMAP3430_PER_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain emu_pwrdm = {
+	.name		= "emu_pwrdm",
+	.prcm_offs	= OMAP3430_EMU_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain neon_pwrdm = {
+	.name		  = "neon_pwrdm",
+	.prcm_offs	  = OMAP3430_NEON_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+};
+
+static struct powerdomain usbhost_pwrdm = {
+	.name		  = "usbhost_pwrdm",
+	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	/*
+	 * REVISIT: Enabling usb host save and restore mechanism seems to
+	 * leave the usb host domain permanently in ACTIVE mode after
+	 * changing the usb host power domain state from OFF to active once.
+	 * Disabling for now.
+	 */
+	/*.flags	  = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain dpll1_pwrdm = {
+	.name		= "dpll1_pwrdm",
+	.prcm_offs	= MPU_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll2_pwrdm = {
+	.name		= "dpll2_pwrdm",
+	.prcm_offs	= OMAP3430_IVA2_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll3_pwrdm = {
+	.name		= "dpll3_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll4_pwrdm = {
+	.name		= "dpll4_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll5_pwrdm = {
+	.name		= "dpll5_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
+
+	&wkup_omap2_pwrdm,
+	&gfx_omap2_pwrdm,
+	&iva2_pwrdm,
+	&mpu_3xxx_pwrdm,
+	&neon_pwrdm,
+	&core_3xxx_pre_es3_1_pwrdm,
+	&core_3xxx_es3_1_pwrdm,
+	&cam_pwrdm,
+	&dss_pwrdm,
+	&per_pwrdm,
+	&emu_pwrdm,
+	&sgx_pwrdm,
+	&usbhost_pwrdm,
+	&dpll1_pwrdm,
+	&dpll2_pwrdm,
+	&dpll3_pwrdm,
+	&dpll4_pwrdm,
+	&dpll5_pwrdm,
+#endif
+	NULL
+};
+
+
+void __init omap3xxx_powerdomains_init(void)
+{
+	pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+}