Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...

1 files changed, 152 insertions, 67 deletions

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5f5ee16f07a3..4740989ed9c4 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -143,7 +143,7 @@
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
-	ocp {
+	ocp: ocp {
 		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,43 +334,73 @@
 			#pinctrl-cells = <2>;
 		};
 
-		edma: edma@43300000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg = <0x43300000 0x100000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
+		target-module@43300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43300000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43300000 0x100000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x100000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+				/*
+				* memcpy is disabled, can be enabled with:
+				* ti,edma-memcpy-channels = <20 21>;
+				* for example. Note that these channels need to be
+				* masked in the xbar as well.
+				*/
+			};
+		};
 
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+		target-module@43400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43400000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43400000 0x100000>;
 
-			/*
-			 * memcpy is disabled, can be enabled with:
-			 * ti,edma-memcpy-channels = <20 21>;
-			 * for example. Note that these channels need to be
-			 * masked in the xbar as well.
-			 */
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc0: tptc@43400000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x43400000 0x100000>;
-			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
+		target-module@43500000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43500000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43500000 0x100000>;
 
-		edma_tptc1: tptc@43500000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x43500000 0x100000>;
-			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		dmm@4e000000 {
@@ -708,44 +738,99 @@
 			ti,irqs-safe-map = <0>;
 		};
 
-		dss: dss@58000000 {
-			compatible = "ti,dra7-dss";
-			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
-			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			/* CTRL_CORE_DSS_PLL_CONTROL */
-			syscon-pll-ctrl = <&scm_conf 0x538>;
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,dra7-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
-				clock-names = "fck";
-				/* CTRL_CORE_SMA_SW_1 */
-				syscon-pol = <&scm_conf 0x534>;
-			};
+			ranges = <0 0x58000000 0x800000>;
 
-			hdmi: encoder@58060000 {
-				compatible = "ti,dra7-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			dss: dss@0 {
+				compatible = "ti,dra7-dss";
+				/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+				/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
 				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-					 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma_xbar 76>;
-				dma-names = "audio_tx";
+				/* CTRL_CORE_DSS_PLL_CONTROL */
+				syscon-pll-ctrl = <&scm_conf 0x538>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x800000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,dra7-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+						/* CTRL_CORE_SMA_SW_1 */
+						syscon-pol = <&scm_conf 0x534>;
+					};
+				};
+
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,dra7-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma_xbar 76>;
+						dma-names = "audio_tx";
+					};
+				};
 			};
 		};