Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
pull-request: wireless-next-2024-09-04

here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================

Conflicts:

drivers/net/wireless/ath/ath12k/hw.c
  38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
  8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org

Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 93 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
new file mode 100644
index 000000000000..1715b22e0dcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/marvell,sd8787.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This node provides properties for describing the Marvell SDIO/PCIE wireless device.
+  The node is expected to be specified as a child node to the SDIO/PCIE controller that
+  connects the device to the system.
+
+properties:
+  compatible:
+    enum:
+      - marvell,sd8787
+      - marvell,sd8897
+      - marvell,sd8978
+      - marvell,sd8997
+      - nxp,iw416
+      - pci11ab,2b42
+      - pci1b4b,2b42
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  marvell,caldata-txpwrlimit-2g:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: Calibration data for the 2GHz band.
+    maxItems: 566
+
+  marvell,caldata-txpwrlimit-5g-sub0:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: Calibration data for sub-band 0 in the 5GHz band.
+    maxItems: 502
+
+  marvell,caldata-txpwrlimit-5g-sub1:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: Calibration data for sub-band 1 in the 5GHz band.
+    maxItems: 688
+
+  marvell,caldata-txpwrlimit-5g-sub2:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: Calibration data for sub-band 2 in the 5GHz band.
+    maxItems: 750
+
+  marvell,caldata-txpwrlimit-5g-sub3:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: Calibration data for sub-band 3 in the 5GHz band.
+    maxItems: 502
+
+  marvell,wakeup-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Provides the pin number for the wakeup pin from the device's point of
+      view. The wakeup pin is used for the device to wake the host system
+      from sleep. This property is only necessary if the wakeup pin is
+      wired in a non-standard way, such that the default pin assignments
+      are invalid.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc {
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+         wifi@1 {
+             compatible = "marvell,sd8897";
+             reg = <1>;
+             interrupt-parent = <&pio>;
+             interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+             marvell,wakeup-pin = <3>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
deleted file mode 100644
index cdc303caf5f4..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
-------
-
-This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
-The node is expected to be specified as a child node to the SDIO/PCIE controller that
-connects the device to the system.
-
-Required properties:
-
-  - compatible : should be one of the following:
-	* "marvell,sd8787"
-	* "marvell,sd8897"
-	* "marvell,sd8978"
-	* "marvell,sd8997"
-	* "nxp,iw416"
-	* "pci11ab,2b42"
-	* "pci1b4b,2b42"
-
-Optional properties:
-
-  - marvell,caldata* : A series of properties with marvell,caldata prefix,
-		      represent calibration data downloaded to the device during
-		      initialization. This is an array of unsigned 8-bit values.
-		      the properties should follow below property name and
-		      corresponding array length:
-	"marvell,caldata-txpwrlimit-2g" (length = 566).
-	"marvell,caldata-txpwrlimit-5g-sub0" (length = 502).
-	"marvell,caldata-txpwrlimit-5g-sub1" (length = 688).
-	"marvell,caldata-txpwrlimit-5g-sub2" (length = 750).
-	"marvell,caldata-txpwrlimit-5g-sub3" (length = 502).
-  - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
-		      to firmware. Firmware will wakeup the host using this pin
-		      during suspend/resume.
-  - interrupts : interrupt pin number to the cpu. driver will request an irq based on
-		 this interrupt number. during system suspend, the irq will be enabled
-		 so that the wifi chip can wakeup host platform under certain condition.
-		 during system resume, the irq will be disabled to make sure
-		 unnecessary interrupt is not received.
-  - vmmc-supply: a phandle of a regulator, supplying VCC to the card
-  - mmc-pwrseq:  phandle to the MMC power sequence node. See "mmc-pwrseq-*"
-		 for documentation of MMC power sequence bindings.
-
-Example:
-
-Tx power limit calibration data is configured in below example.
-The calibration data is an array of unsigned values, the length
-can vary between hw versions.
-IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
-so that firmware can wakeup host using this device side pin.
-
-&mmc3 {
-	vmmc-supply = <&wlan_en_reg>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	mwifiex: wifi@1 {
-		compatible = "marvell,sd8897";
-		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
-
-		marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 <
-	0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>;
-		marvell,wakeup-pin = <3>;
-	};
-};