diff options
| author | Randy Dunlap <rdunlap@infradead.org> | 2023-01-26 22:39:57 -0800 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2023-01-27 12:14:17 +0000 |
| commit | 0f6d2cee58f1ff2ebf66f0bceb113d79f66ecb07 (patch) | |
| tree | 932dd6f8717ec5da8da5b8160965544835976079 /Documentation/spi | |
| parent | 22913a63b477c5f167012d4f1265d023a102c1fe (diff) | |
spi: correct spelling
Correct spelling problems for Documentation/spi/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230127064005.1558-28-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'Documentation/spi')
| -rw-r--r-- | Documentation/spi/pxa2xx.rst | 12 | ||||
| -rw-r--r-- | Documentation/spi/spi-lm70llp.rst | 2 | ||||
| -rw-r--r-- | Documentation/spi/spi-summary.rst | 2 |
3 files changed, 8 insertions, 8 deletions
diff --git a/Documentation/spi/pxa2xx.rst b/Documentation/spi/pxa2xx.rst index 716f65d87d04..04f2a3856c40 100644 --- a/Documentation/spi/pxa2xx.rst +++ b/Documentation/spi/pxa2xx.rst @@ -141,15 +141,15 @@ field. Below is a sample configuration using the PXA255 NSSP. :: static struct pxa2xx_spi_chip cs8415a_chip_info = { - .tx_threshold = 8, /* SSP hardward FIFO threshold */ - .rx_threshold = 8, /* SSP hardward FIFO threshold */ + .tx_threshold = 8, /* SSP hardware FIFO threshold */ + .rx_threshold = 8, /* SSP hardware FIFO threshold */ .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ .timeout = 235, /* See Intel documentation */ }; static struct pxa2xx_spi_chip cs8405a_chip_info = { - .tx_threshold = 8, /* SSP hardward FIFO threshold */ - .rx_threshold = 8, /* SSP hardward FIFO threshold */ + .tx_threshold = 8, /* SSP hardware FIFO threshold */ + .rx_threshold = 8, /* SSP hardware FIFO threshold */ .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ .timeout = 235, /* See Intel documentation */ }; @@ -157,7 +157,7 @@ field. Below is a sample configuration using the PXA255 NSSP. static struct spi_board_info streetracer_spi_board_info[] __initdata = { { .modalias = "cs8415a", /* Name of spi_driver for this device */ - .max_speed_hz = 3686400, /* Run SSP as fast a possbile */ + .max_speed_hz = 3686400, /* Run SSP as fast a possible */ .bus_num = 2, /* Framework bus number */ .chip_select = 0, /* Framework chip select */ .platform_data = NULL; /* No spi_driver specific config */ @@ -166,7 +166,7 @@ field. Below is a sample configuration using the PXA255 NSSP. }, { .modalias = "cs8405a", /* Name of spi_driver for this device */ - .max_speed_hz = 3686400, /* Run SSP as fast a possbile */ + .max_speed_hz = 3686400, /* Run SSP as fast a possible */ .bus_num = 2, /* Framework bus number */ .chip_select = 1, /* Framework chip select */ .controller_data = &cs8405a_chip_info, /* Master chip config */ diff --git a/Documentation/spi/spi-lm70llp.rst b/Documentation/spi/spi-lm70llp.rst index 07631aef4343..0144e12d95bb 100644 --- a/Documentation/spi/spi-lm70llp.rst +++ b/Documentation/spi/spi-lm70llp.rst @@ -57,7 +57,7 @@ devices might share the same SI/SO pin. The bitbanger routine in this driver (lm70_txrx) is called back from the bound "hwmon/lm70" protocol driver through its sysfs hook, using a spi_write_then_read() call. It performs Mode 0 (SPI/Microwire) bitbanging. -The lm70 driver then inteprets the resulting digital temperature value +The lm70 driver then interprets the resulting digital temperature value and exports it through sysfs. A "gotcha": National Semiconductor's LM70 LLP eval board circuit schematic diff --git a/Documentation/spi/spi-summary.rst b/Documentation/spi/spi-summary.rst index aab5d07cb3d7..3c95ae322fb1 100644 --- a/Documentation/spi/spi-summary.rst +++ b/Documentation/spi/spi-summary.rst @@ -105,7 +105,7 @@ find isn't necessarily helpful. The four modes combine two mode bits: - CPHA indicates the clock phase used to sample data; CPHA=0 says sample on the leading edge, CPHA=1 means the trailing edge. - Since the signal needs to stablize before it's sampled, CPHA=0 + Since the signal needs to stabilize before it's sampled, CPHA=0 implies that its data is written half a clock before the first clock edge. The chipselect may have made it become available. |