Merge tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for 5.6-rc3
  that resolve a bunch of reported issues.

  They are:
   - vt selection and ioctl fixes
   - serdev bugfix
   - atmel serial driver fixes
   - qcom serial driver fixes
   - other minor serial driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: selection, close sel_buffer race
  vt: selection, handle pending signals in paste_selection
  serial: cpm_uart: call cpm_muram_init before registering console
  tty: serial: qcom_geni_serial: Fix RX cancel command failure
  serial: 8250: Check UPF_IRQ_SHARED in advance
  tty: serial: imx: setup the correct sg entry for tx dma
  vt: vt_ioctl: fix race in VT_RESIZEX
  vt: fix scrollback flushing on background consoles
  tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
  tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  serdev: ttyport: restore client ops on deregistration
  serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE

16 files changed, 104 insertions, 51 deletions

diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index d1cdd2ab8b4c..d367803e2044 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -265,7 +265,6 @@ struct device *serdev_tty_port_register(struct tty_port *port,
 					struct device *parent,
 					struct tty_driver *drv, int idx)
 {
-	const struct tty_port_client_operations *old_ops;
 	struct serdev_controller *ctrl;
 	struct serport *serport;
 	int ret;
@@ -284,7 +283,6 @@ struct device *serdev_tty_port_register(struct tty_port *port,
 
 	ctrl->ops = &ctrl_ops;
 
-	old_ops = port->client_ops;
 	port->client_ops = &client_ops;
 	port->client_data = ctrl;
 
@@ -297,7 +295,7 @@ struct device *serdev_tty_port_register(struct tty_port *port,
 
 err_reset_data:
 	port->client_data = NULL;
-	port->client_ops = old_ops;
+	port->client_ops = &tty_port_default_client_ops;
 	serdev_controller_put(ctrl);
 
 	return ERR_PTR(ret);
@@ -312,8 +310,8 @@ int serdev_tty_port_unregister(struct tty_port *port)
 		return -ENODEV;
 
 	serdev_controller_remove(ctrl);
-	port->client_ops = NULL;
 	port->client_data = NULL;
+	port->client_ops = &tty_port_default_client_ops;
 	serdev_controller_put(ctrl);
 
 	return 0;
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index d657aa14c3e4..c33e02cbde93 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -446,7 +446,6 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 		port.port.line = rc;
 
 	port.port.irq = irq_of_parse_and_map(np, 0);
-	port.port.irqflags = IRQF_SHARED;
 	port.port.handle_irq = aspeed_vuart_handle_irq;
 	port.port.iotype = UPIO_MEM;
 	port.port.type = PORT_16550A;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 0894a22fd702..f2a33c9082a6 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -174,7 +174,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 	struct hlist_head *h;
 	struct hlist_node *n;
 	struct irq_info *i;
-	int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+	int ret;
 
 	mutex_lock(&hash_mutex);
 
@@ -209,9 +209,8 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 		INIT_LIST_HEAD(&up->list);
 		i->head = &up->list;
 		spin_unlock_irq(&i->lock);
-		irq_flags |= up->port.irqflags;
 		ret = request_irq(up->port.irq, serial8250_interrupt,
-				  irq_flags, up->port.name, i);
+				  up->port.irqflags, up->port.name, i);
 		if (ret < 0)
 			serial_do_unlink(i, up);
 	}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 531ad67395e0..f6687756ec5e 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -202,7 +202,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 
 	port->type = type;
 	port->uartclk = clk;
-	port->irqflags |= IRQF_SHARED;
 
 	if (of_property_read_bool(np, "no-loopback-test"))
 		port->flags |= UPF_SKIP_TEST;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 430e3467aff7..0325f2e53b74 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2177,6 +2177,10 @@ int serial8250_do_startup(struct uart_port *port)
 		}
 	}
 
+	/* Check if we need to have shared IRQs */
+	if (port->irq && (up->port.flags & UPF_SHARE_IRQ))
+		up->port.irqflags |= IRQF_SHARED;
+
 	if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
 		unsigned char iir1;
 		/*
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 3bdd56a1021b..ea12f10610b6 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -286,6 +286,10 @@ static void ar933x_uart_set_termios(struct uart_port *port,
 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
 			    AR933X_UART_CS_HOST_INT_EN);
 
+	/* enable RX and TX ready overide */
+	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+
 	/* reenable the UART */
 	ar933x_uart_rmw(up, AR933X_UART_CS_REG,
 			AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
@@ -418,6 +422,10 @@ static int ar933x_uart_startup(struct uart_port *port)
 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
 			    AR933X_UART_CS_HOST_INT_EN);
 
+	/* enable RX and TX ready overide */
+	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+
 	/* Enable RX interrupts */
 	up->ier = AR933X_UART_INT_RX_VALID;
 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index c15c398c88a9..a39c87a7c2e1 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -570,7 +570,8 @@ static void atmel_stop_tx(struct uart_port *port)
 	atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
 
 	if (atmel_uart_is_half_duplex(port))
-		atmel_start_rx(port);
+		if (!atomic_read(&atmel_port->tasklet_shutdown))
+			atmel_start_rx(port);
 
 }
 
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 19d5a4cf29a6..d4b81b06e0cb 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1373,6 +1373,7 @@ static struct console cpm_scc_uart_console = {
 
 static int __init cpm_uart_console_init(void)
 {
+	cpm_muram_init();
 	register_console(&cpm_scc_uart_console);
 	return 0;
 }
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 0c6c63166250..d337782b3648 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -599,7 +599,7 @@ static void imx_uart_dma_tx(struct imx_port *sport)
 
 	sport->tx_bytes = uart_circ_chars_pending(xmit);
 
-	if (xmit->tail < xmit->head) {
+	if (xmit->tail < xmit->head || xmit->head == 0) {
 		sport->dma_tx_nents = 1;
 		sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
 	} else {
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 191abb18fc2a..0bd1684cabb3 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -129,6 +129,7 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
 static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
 static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
 static void qcom_geni_serial_stop_rx(struct uart_port *uport);
+static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop);
 
 static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
 					32000000, 48000000, 64000000, 80000000,
@@ -599,7 +600,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport)
 	u32 irq_en;
 	u32 status;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
-	u32 irq_clear = S_CMD_DONE_EN;
+	u32 s_irq_status;
 
 	irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
 	irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN);
@@ -615,10 +616,19 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport)
 		return;
 
 	geni_se_cancel_s_cmd(&port->se);
-	qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG,
-					S_GENI_CMD_CANCEL, false);
+	qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
+					S_CMD_CANCEL_EN, true);
+	/*
+	 * If timeout occurs secondary engine remains active
+	 * and Abort sequence is executed.
+	 */
+	s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
+	/* Flush the Rx buffer */
+	if (s_irq_status & S_RX_FIFO_LAST_EN)
+		qcom_geni_serial_handle_rx(uport, true);
+	writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
+
 	status = readl(uport->membase + SE_GENI_STATUS);
-	writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
 	if (status & S_GENI_CMD_ACTIVE)
 		qcom_geni_serial_abort_rx(uport);
 }
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 33034b852a51..8de8bac9c6c7 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -692,11 +692,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
 				   count, DMA_TO_DEVICE);
 }
 
+static void do_handle_rx_pio(struct tegra_uart_port *tup)
+{
+	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+	struct tty_port *port = &tup->uport.state->port;
+
+	tegra_uart_handle_rx_pio(tup, port);
+	if (tty) {
+		tty_flip_buffer_push(port);
+		tty_kref_put(tty);
+	}
+}
+
 static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
 				      unsigned int residue)
 {
 	struct tty_port *port = &tup->uport.state->port;
-	struct tty_struct *tty = tty_port_tty_get(port);
 	unsigned int count;
 
 	async_tx_ack(tup->rx_dma_desc);
@@ -705,11 +716,7 @@ static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
 	/* If we are here, DMA is stopped */
 	tegra_uart_copy_rx_to_tty(tup, port, count);
 
-	tegra_uart_handle_rx_pio(tup, port);
-	if (tty) {
-		tty_flip_buffer_push(port);
-		tty_kref_put(tty);
-	}
+	do_handle_rx_pio(tup);
 }
 
 static void tegra_uart_rx_dma_complete(void *args)
@@ -749,8 +756,10 @@ static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup)
 {
 	struct dma_tx_state state;
 
-	if (!tup->rx_dma_active)
+	if (!tup->rx_dma_active) {
+		do_handle_rx_pio(tup);
 		return;
+	}
 
 	dmaengine_terminate_all(tup->rx_dma_chan);
 	dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
@@ -816,18 +825,6 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
 		uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
 }
 
-static void do_handle_rx_pio(struct tegra_uart_port *tup)
-{
-	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
-	struct tty_port *port = &tup->uport.state->port;
-
-	tegra_uart_handle_rx_pio(tup, port);
-	if (tty) {
-		tty_flip_buffer_push(port);
-		tty_kref_put(tty);
-	}
-}
-
 static irqreturn_t tegra_uart_isr(int irq, void *data)
 {
 	struct tegra_uart_port *tup = data;
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 044c3cbdcfa4..ea80bf872f54 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -52,10 +52,11 @@ static void tty_port_default_wakeup(struct tty_port *port)
 	}
 }
 
-static const struct tty_port_client_operations default_client_ops = {
+const struct tty_port_client_operations tty_port_default_client_ops = {
 	.receive_buf = tty_port_default_receive_buf,
 	.write_wakeup = tty_port_default_wakeup,
 };
+EXPORT_SYMBOL_GPL(tty_port_default_client_ops);
 
 void tty_port_init(struct tty_port *port)
 {
@@ -68,7 +69,7 @@ void tty_port_init(struct tty_port *port)
 	spin_lock_init(&port->lock);
 	port->close_delay = (50 * HZ) / 100;
 	port->closing_wait = (3000 * HZ) / 100;
-	port->client_ops = &default_client_ops;
+	port->client_ops = &tty_port_default_client_ops;
 	kref_init(&port->kref);
 }
 EXPORT_SYMBOL(tty_port_init);
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 78732feaf65b..0c50d7410b31 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -16,6 +16,7 @@
 #include <linux/tty.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
@@ -29,6 +30,8 @@
 #include <linux/console.h>
 #include <linux/tty_flip.h>
 
+#include <linux/sched/signal.h>
+
 /* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
 #define isspace(c)	((c) == ' ')
 
@@ -43,6 +46,7 @@ static volatile int sel_start = -1; 	/* cleared by clear_selection */
 static int sel_end;
 static int sel_buffer_lth;
 static char *sel_buffer;
+static DEFINE_MUTEX(sel_lock);
 
 /* clear_selection, highlight and highlight_pointer can be called
    from interrupt (via scrollback/front) */
@@ -184,7 +188,7 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 	char *bp, *obp;
 	int i, ps, pe, multiplier;
 	u32 c;
-	int mode;
+	int mode, ret = 0;
 
 	poke_blanked_console();
 
@@ -210,6 +214,7 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 	if (ps > pe)	/* make sel_start <= sel_end */
 		swap(ps, pe);
 
+	mutex_lock(&sel_lock);
 	if (sel_cons != vc_cons[fg_console].d) {
 		clear_selection();
 		sel_cons = vc_cons[fg_console].d;
@@ -255,9 +260,10 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 			break;
 		case TIOCL_SELPOINTER:
 			highlight_pointer(pe);
-			return 0;
+			goto unlock;
 		default:
-			return -EINVAL;
+			ret = -EINVAL;
+			goto unlock;
 	}
 
 	/* remove the pointer */
@@ -279,7 +285,7 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 	else if (new_sel_start == sel_start)
 	{
 		if (new_sel_end == sel_end)	/* no action required */
-			return 0;
+			goto unlock;
 		else if (new_sel_end > sel_end)	/* extend to right */
 			highlight(sel_end + 2, new_sel_end);
 		else				/* contract from right */
@@ -307,7 +313,8 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 	if (!bp) {
 		printk(KERN_WARNING "selection: kmalloc() failed\n");
 		clear_selection();
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto unlock;
 	}
 	kfree(sel_buffer);
 	sel_buffer = bp;
@@ -332,7 +339,9 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 		}
 	}
 	sel_buffer_lth = bp - sel_buffer;
-	return 0;
+unlock:
+	mutex_unlock(&sel_lock);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(set_selection_kernel);
 
@@ -350,6 +359,7 @@ int paste_selection(struct tty_struct *tty)
 	unsigned int count;
 	struct  tty_ldisc *ld;
 	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
 
 	console_lock();
 	poke_blanked_console();
@@ -361,10 +371,17 @@ int paste_selection(struct tty_struct *tty)
 	tty_buffer_lock_exclusive(&vc->port);
 
 	add_wait_queue(&vc->paste_wait, &wait);
+	mutex_lock(&sel_lock);
 	while (sel_buffer && sel_buffer_lth > pasted) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
 		if (tty_throttled(tty)) {
+			mutex_unlock(&sel_lock);
 			schedule();
+			mutex_lock(&sel_lock);
 			continue;
 		}
 		__set_current_state(TASK_RUNNING);
@@ -373,11 +390,12 @@ int paste_selection(struct tty_struct *tty)
 					      count);
 		pasted += count;
 	}
+	mutex_unlock(&sel_lock);
 	remove_wait_queue(&vc->paste_wait, &wait);
 	__set_current_state(TASK_RUNNING);
 
 	tty_buffer_unlock_exclusive(&vc->port);
 	tty_ldisc_deref(ld);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(paste_selection);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 35d21cdb60d0..0cfbb7182b5a 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -936,10 +936,21 @@ static void flush_scrollback(struct vc_data *vc)
 	WARN_CONSOLE_UNLOCKED();
 
 	set_origin(vc);
-	if (vc->vc_sw->con_flush_scrollback)
+	if (vc->vc_sw->con_flush_scrollback) {
 		vc->vc_sw->con_flush_scrollback(vc);
-	else
+	} else if (con_is_visible(vc)) {
+		/*
+		 * When no con_flush_scrollback method is provided then the
+		 * legacy way for flushing the scrollback buffer is to use
+		 * a side effect of the con_switch method. We do it only on
+		 * the foreground console as background consoles have no
+		 * scrollback buffers in that case and we obviously don't
+		 * want to switch to them.
+		 */
+		hide_cursor(vc);
 		vc->vc_sw->con_switch(vc);
+		set_cursor(vc);
+	}
 }
 
 /*
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 8b0ed139592f..ee6c91ef1f6c 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -876,15 +876,20 @@ int vt_ioctl(struct tty_struct *tty,
 			return -EINVAL;
 
 		for (i = 0; i < MAX_NR_CONSOLES; i++) {
+			struct vc_data *vcp;
+
 			if (!vc_cons[i].d)
 				continue;
 			console_lock();
-			if (v.v_vlin)
-				vc_cons[i].d->vc_scan_lines = v.v_vlin;
-			if (v.v_clin)
-				vc_cons[i].d->vc_font.height = v.v_clin;
-			vc_cons[i].d->vc_resize_user = 1;
-			vc_resize(vc_cons[i].d, v.v_cols, v.v_rows);
+			vcp = vc_cons[i].d;
+			if (vcp) {
+				if (v.v_vlin)
+					vcp->vc_scan_lines = v.v_vlin;
+				if (v.v_clin)
+					vcp->vc_font.height = v.v_clin;
+				vcp->vc_resize_user = 1;
+				vc_resize(vcp, v.v_cols, v.v_rows);
+			}
 			console_unlock();
 		}
 		break;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index bfa4e2ee94a9..bd5fe0e907e8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -225,6 +225,8 @@ struct tty_port_client_operations {
 	void (*write_wakeup)(struct tty_port *port);
 };
 
+extern const struct tty_port_client_operations tty_port_default_client_ops;
+
 struct tty_port {
 	struct tty_bufhead	buf;		/* Locked internally */
 	struct tty_struct	*tty;		/* Back pointer */