diff options
| author | Alexander Duyck <aduyck@mirantis.com> | 2015-10-20 13:28:17 -0700 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2015-12-03 12:41:48 -0800 |
| commit | bf4d67d94c842edf57e3cac2c4dff58a9ce7ac41 (patch) | |
| tree | 774fb8de09291e5c149ad19ca8afe93002ef41f5 | |
| parent | cf18b7788fe1bf99e9c2ab580b065bf2d3cb1a34 (diff) | |
ixgbe: Reset interface after enabling SR-IOV
Enabling SR-IOV and then bringing the interface up was resulting in the PF
MAC addresses getting into a bad state. Specifically the MAC address was
enabled for both VF 0 and the PF. This resulted in some odd behaviors such
as VF 0 receiving a copy of the PFs traffic, which in turn enables the
ability for VF 0 to spoof the PF.
A workaround for this issue appears to be to bring up the interface first
and then enable SR-IOV as this way the reset is then triggered in the
existing code.
In order to correct this I have added a change to ixgbe_setup_tc where if
the interface is down we still will at least call ixgbe_reset so that the
MAC addresses for the device are reset to the correct pools.
Steps to reproduce issue:
modprobe ixgbe
echo 7 > /sys/bus/pci/devices/0000\:01\:00.1/sriov_numvfs
ifconfig enp1s0f1 up
ethregs -s 1:00.1 | grep MPSAR | grep -v 00000000
Result:
MPSAR[0] 00000081
MPSAR[254] 00000001
Expected Result, behavior after patch:
MPSAR[0] 00000080
MPSAR[254] 00000080
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Darin Miller <darin.j.miller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 47395ff5d908..aed8d029b23d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7920,6 +7920,9 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) */ if (netif_running(dev)) ixgbe_close(dev); + else + ixgbe_reset(adapter); + ixgbe_clear_interrupt_scheme(adapter); #ifdef CONFIG_IXGBE_DCB |