spi: s3c64xx: move controller information into driver data

Platform data is used to specify controller hardware specific information
such as the tx/rx fifo level mask and bit offset of rx fifo level. Such
information is not suitable to be supplied from device tree. Instead,
it can be moved into the driver data and removed from platform data.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

17 files changed, 181 insertions, 198 deletions

diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index bcb7db453145..10a46a9f0ea7 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -586,17 +586,17 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "exynos4210-spi.0",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 16),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "exynos4210-spi.1",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.2",
+		.devname	= "exynos4210-spi.2",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 18),
 	}, {
@@ -1245,7 +1245,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 static struct clksrc_clk exynos4_clk_sclk_spi0 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "exynos4210-spi.0",
 		.enable		= exynos4_clksrc_mask_peril1_ctrl,
 		.ctrlbit	= (1 << 16),
 	},
@@ -1257,7 +1257,7 @@ static struct clksrc_clk exynos4_clk_sclk_spi0 = {
 static struct clksrc_clk exynos4_clk_sclk_spi1 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "exynos4210-spi.1",
 		.enable		= exynos4_clksrc_mask_peril1_ctrl,
 		.ctrlbit	= (1 << 20),
 	},
@@ -1269,7 +1269,7 @@ static struct clksrc_clk exynos4_clk_sclk_spi1 = {
 static struct clksrc_clk exynos4_clk_sclk_spi2 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.2",
+		.devname	= "exynos4210-spi.2",
 		.enable		= exynos4_clksrc_mask_peril1_ctrl,
 		.ctrlbit	= (1 << 24),
 	},
@@ -1347,9 +1347,9 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
+	CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
+	CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
+	CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
 };
 
 static int xtal_rate;
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
index 833ff40ee0e8..a71ec4db4cf4 100644
--- a/arch/arm/mach-exynos/setup-spi.c
+++ b/arch/arm/mach-exynos/setup-spi.c
@@ -12,17 +12,8 @@
 #include <linux/platform_device.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x1ff,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.clk_from_cmu	= true,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
@@ -34,14 +25,6 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.clk_from_cmu	= true,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
@@ -53,14 +36,6 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI2
-struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.clk_from_cmu	= true,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 8702ecfaab30..14a81c2317a4 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,7 +144,8 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
+	/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
+	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index a4c5a520d994..7f689ce1be61 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -181,7 +181,7 @@ static struct clk *clks[] __initdata = {
 
 static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
 };
 
 void __init s3c2443_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index aeeb2be283fa..aeb4a24ff3ed 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -559,7 +559,7 @@ static struct clk hsmmc1_clk = {
 
 static struct clk hsspi_clk = {
 	.name		= "spi",
-	.devname	= "s3c64xx-spi.0",
+	.devname	= "s3c2443-spi.0",
 	.parent		= &clk_p,
 	.enable		= s3c2443_clkcon_enable_p,
 	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
@@ -633,7 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
+	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
index 5712c85f39b1..42abe157f98f 100644
--- a/arch/arm/mach-s3c24xx/setup-spi.c
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -13,19 +13,11 @@
 #include <linux/platform_device.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.tx_st_done	= 21,
-	.high_speed	= 1,
-};
-
 int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
 {
 	/* enable hsspi bit in misccr */
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 52f079a691cb..28041e83dc82 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -178,13 +178,13 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s3c6410-spi.0",
 		.parent		= &clk_p,
 		.enable		= s3c64xx_pclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s3c6410-spi.1",
 		.parent		= &clk_p,
 		.enable		= s3c64xx_pclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
@@ -331,7 +331,7 @@ static struct clk init_clocks_off[] = {
 
 static struct clk clk_48m_spi0 = {
 	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.0",
+	.devname	= "s3c6410-spi.0",
 	.parent		= &clk_48m,
 	.enable		= s3c64xx_sclk_ctrl,
 	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
@@ -339,7 +339,7 @@ static struct clk clk_48m_spi0 = {
 
 static struct clk clk_48m_spi1 = {
 	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.1",
+	.devname	= "s3c6410-spi.1",
 	.parent		= &clk_48m,
 	.enable		= s3c64xx_sclk_ctrl,
 	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
@@ -802,7 +802,7 @@ static struct clksrc_clk clk_sclk_mmc2 = {
 static struct clksrc_clk clk_sclk_spi0 = {
 	.clk	= {
 		.name		= "spi-bus",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s3c6410-spi.0",
 		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
 		.enable		= s3c64xx_sclk_ctrl,
 	},
@@ -814,7 +814,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
 static struct clksrc_clk clk_sclk_spi1 = {
 	.clk	= {
 		.name		= "spi-bus",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s3c6410-spi.1",
 		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
 		.enable		= s3c64xx_sclk_ctrl,
 	},
@@ -858,10 +858,10 @@ static struct clk_lookup s3c64xx_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
 	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
+	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
+	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
 };
 
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c
index d9592ad7a825..ff999d95b370 100644
--- a/arch/arm/mach-s3c64xx/setup-spi.c
+++ b/arch/arm/mach-s3c64xx/setup-spi.c
@@ -12,15 +12,8 @@
 #include <linux/platform_device.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.tx_st_done	= 21,
-};
-
 int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
@@ -30,12 +23,6 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.tx_st_done	= 21,
-};
-
 int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index ee1e8e7f5631..000445596ec4 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -227,13 +227,13 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5p64x0-spi.0",
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 21),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5p64x0-spi.1",
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 22),
@@ -467,7 +467,7 @@ static struct clksrc_clk clk_sclk_uclk = {
 static struct clksrc_clk clk_sclk_spi0 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5p64x0-spi.0",
 		.ctrlbit	= (1 << 20),
 		.enable		= s5p64x0_sclk_ctrl,
 	},
@@ -479,7 +479,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
 static struct clksrc_clk clk_sclk_spi1 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5p64x0-spi.1",
 		.ctrlbit	= (1 << 21),
 		.enable		= s5p64x0_sclk_ctrl,
 	},
@@ -519,8 +519,8 @@ static struct clk_lookup s5p6440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
 	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index dae6a13f43bb..f3e0ef3d27c9 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -236,13 +236,13 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5p64x0-spi.0",
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 21),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5p64x0-spi.1",
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 22),
@@ -528,7 +528,7 @@ static struct clksrc_clk clk_sclk_uclk = {
 static struct clksrc_clk clk_sclk_spi0 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5p64x0-spi.0",
 		.ctrlbit	= (1 << 20),
 		.enable		= s5p64x0_sclk_ctrl,
 	},
@@ -540,7 +540,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
 static struct clksrc_clk clk_sclk_spi1 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5p64x0-spi.1",
 		.ctrlbit	= (1 << 21),
 		.enable		= s5p64x0_sclk_ctrl,
 	},
@@ -562,8 +562,8 @@ static struct clk_lookup s5p6450_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
 	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
index e9b841240352..1cf84b524698 100644
--- a/arch/arm/mach-s5p64x0/setup-spi.c
+++ b/arch/arm/mach-s5p64x0/setup-spi.c
@@ -10,19 +10,9 @@
 
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-
 #include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/s3c64xx-spi.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x1ff,
-	.rx_lvl_offset	= 15,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 {
 	if (soc_is_s5p6450())
@@ -36,12 +26,6 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 {
 	if (soc_is_s5p6450())
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 16eca4ea2010..926219791f0d 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -564,19 +564,19 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5pc100-spi.0",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_4_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5pc100-spi.1",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_4_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.2",
+		.devname	= "s5pc100-spi.2",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_4_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -702,7 +702,7 @@ static struct clk clk_hsmmc0 = {
 
 static struct clk clk_48m_spi0 = {
 	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.0",
+	.devname	= "s5pc100-spi.0",
 	.parent		= &clk_mout_48m.clk,
 	.enable		= s5pc100_sclk0_ctrl,
 	.ctrlbit	= (1 << 7),
@@ -710,7 +710,7 @@ static struct clk clk_48m_spi0 = {
 
 static struct clk clk_48m_spi1 = {
 	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.1",
+	.devname	= "s5pc100-spi.1",
 	.parent		= &clk_mout_48m.clk,
 	.enable		= s5pc100_sclk0_ctrl,
 	.ctrlbit	= (1 << 8),
@@ -718,7 +718,7 @@ static struct clk clk_48m_spi1 = {
 
 static struct clk clk_48m_spi2 = {
 	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.2",
+	.devname	= "s5pc100-spi.2",
 	.parent		= &clk_mout_48m.clk,
 	.enable		= s5pc100_sclk0_ctrl,
 	.ctrlbit	= (1 << 9),
@@ -1085,7 +1085,7 @@ static struct clksrc_clk clk_sclk_mmc2 = {
 static struct clksrc_clk clk_sclk_spi0 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5pc100-spi.0",
 		.ctrlbit	= (1 << 4),
 		.enable		= s5pc100_sclk0_ctrl,
 	},
@@ -1097,7 +1097,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
 static struct clksrc_clk clk_sclk_spi1 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5pc100-spi.1",
 		.ctrlbit	= (1 << 5),
 		.enable		= s5pc100_sclk0_ctrl,
 	},
@@ -1109,7 +1109,7 @@ static struct clksrc_clk clk_sclk_spi1 = {
 static struct clksrc_clk clk_sclk_spi2 = {
 	.clk	= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.2",
+		.devname	= "s5pc100-spi.2",
 		.ctrlbit	= (1 << 6),
 		.enable		= s5pc100_sclk0_ctrl,
 	},
@@ -1315,12 +1315,12 @@ static struct clk_lookup s5pc100_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
 	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
-	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
+	CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
+	CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
+	CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
+	CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
 };
 
 void __init s5pc100_register_clocks(void)
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
index 431a6f747caa..4b42718948a4 100644
--- a/arch/arm/mach-s5pc100/setup-spi.c
+++ b/arch/arm/mach-s5pc100/setup-spi.c
@@ -12,16 +12,8 @@
 #include <linux/platform_device.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.high_speed	= 1,
-	.tx_st_done	= 21,
-};
-
 int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
@@ -31,13 +23,6 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.high_speed	= 1,
-	.tx_st_done	= 21,
-};
-
 int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
@@ -47,13 +32,6 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI2
-struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.high_speed	= 1,
-	.tx_st_done	= 21,
-};
-
 int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 09609d50961d..fcdf52dbcc49 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -445,19 +445,19 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 11),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5pv210-spi.0",
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<12),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5pv210-spi.1",
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<13),
 	}, {
 		.name		= "spi",
-		.devname	= "s3c64xx-spi.2",
+		.devname	= "s5pv210-spi.2",
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<14),
@@ -1035,7 +1035,7 @@ static struct clksrc_clk clk_sclk_mmc3 = {
 static struct clksrc_clk clk_sclk_spi0 = {
 	.clk		= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
+		.devname	= "s5pv210-spi.0",
 		.enable		= s5pv210_clk_mask0_ctrl,
 		.ctrlbit	= (1 << 16),
 	},
@@ -1047,7 +1047,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
 static struct clksrc_clk clk_sclk_spi1 = {
 	.clk		= {
 		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
+		.devname	= "s5pv210-spi.1",
 		.enable		= s5pv210_clk_mask0_ctrl,
 		.ctrlbit	= (1 << 17),
 	},
@@ -1331,8 +1331,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
 	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
 };
 
 void __init s5pv210_register_clocks(void)
diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c
index f43c5048a37d..2cd66a632791 100644
--- a/arch/arm/mach-s5pv210/setup-spi.c
+++ b/arch/arm/mach-s5pv210/setup-spi.c
@@ -12,16 +12,8 @@
 #include <linux/platform_device.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
-	.fifo_lvl_mask	= 0x1ff,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
@@ -33,13 +25,6 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
 #endif
 
 #ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.tx_st_done	= 25,
-};
-
 int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index fa95e9a00972..4e9b9c314a29 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -33,28 +33,13 @@ struct s3c64xx_spi_csinfo {
 /**
  * struct s3c64xx_spi_info - SPI Controller defining structure
  * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @clk_from_cmu: If the SPI clock/prescalar control block is present
- *     by the platform's clock-management-unit and not in SPI controller.
  * @num_cs: Number of CS this controller emulates.
  * @cfg_gpio: Configure pins for this SPI controller.
- * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
- * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
- * @high_speed: If the controller supports HIGH_SPEED_EN bit
- * @tx_st_done: Depends on tx fifo_lvl field
  */
 struct s3c64xx_spi_info {
 	int src_clk_nr;
-	bool clk_from_cmu;
-
 	int num_cs;
-
 	int (*cfg_gpio)(struct platform_device *pdev);
-
-	/* Following two fields are for future compatibility */
-	int fifo_lvl_mask;
-	int rx_lvl_offset;
-	int high_speed;
-	int tx_st_done;
 };
 
 /**
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 6e60eecbfc4f..8698618e56fe 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -31,6 +31,8 @@
 #include <mach/dma.h>
 #include <plat/s3c64xx-spi.h>
 
+#define MAX_SPI_PORTS		3
+
 /* Registers and bit-fields */
 
 #define S3C64XX_SPI_CH_CFG		0x00
@@ -113,9 +115,12 @@
 
 #define S3C64XX_SPI_FBCLK_MSK		(3<<0)
 
-#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0)
-#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask)
-#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask)
+#define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
+#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \
+				(1 << (i)->port_conf->tx_st_done)) ? 1 : 0)
+#define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
+#define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
+					FIFO_LVL_MASK(i))
 
 #define S3C64XX_SPI_MAX_TRAILCNT	0x3ff
 #define S3C64XX_SPI_TRAILCNT_OFF	19
@@ -134,6 +139,28 @@ struct s3c64xx_spi_dma_data {
 };
 
 /**
+ * struct s3c64xx_spi_info - SPI Controller hardware info
+ * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register.
+ * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
+ * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
+ * @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
+ * @clk_from_cmu: True, if the controller does not include a clock mux and
+ *	prescaler unit.
+ *
+ * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
+ * differ in some aspects such as the size of the fifo and spi bus clock
+ * setup. Such differences are specified to the driver using this structure
+ * which is provided as driver data to the driver.
+ */
+struct s3c64xx_spi_port_config {
+	int	fifo_lvl_mask[MAX_SPI_PORTS];
+	int	rx_lvl_offset;
+	int	tx_st_done;
+	bool	high_speed;
+	bool	clk_from_cmu;
+};
+
+/**
  * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
  * @clk: Pointer to the spi clock.
  * @src_clk: Pointer to the clock used to generate SPI signals.
@@ -171,6 +198,8 @@ struct s3c64xx_spi_driver_data {
 	struct s3c64xx_spi_dma_data	rx_dma;
 	struct s3c64xx_spi_dma_data	tx_dma;
 	struct samsung_dma_ops		*ops;
+	struct s3c64xx_spi_port_config	*port_conf;
+	unsigned int			port_id;
 };
 
 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -179,7 +208,6 @@ static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
 
 static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 {
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	unsigned long loops;
 	u32 val;
@@ -195,7 +223,7 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	loops = msecs_to_loops(1);
 	do {
 		val = readl(regs + S3C64XX_SPI_STATUS);
-	} while (TX_FIFO_LVL(val, sci) && loops--);
+	} while (TX_FIFO_LVL(val, sdd) && loops--);
 
 	if (loops == 0)
 		dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
@@ -204,7 +232,7 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	loops = msecs_to_loops(1);
 	do {
 		val = readl(regs + S3C64XX_SPI_STATUS);
-		if (RX_FIFO_LVL(val, sci))
+		if (RX_FIFO_LVL(val, sdd))
 			readl(regs + S3C64XX_SPI_RX_DATA);
 		else
 			break;
@@ -307,7 +335,6 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_device *spi,
 				struct spi_transfer *xfer, int dma_mode)
 {
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	u32 modecfg, chcfg;
 
@@ -357,7 +384,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 	if (xfer->rx_buf != NULL) {
 		sdd->state |= RXBUSY;
 
-		if (sci->high_speed && sdd->cur_speed >= 30000000UL
+		if (sdd->port_conf->high_speed && sdd->cur_speed >= 30000000UL
 					&& !(sdd->cur_mode & SPI_CPHA))
 			chcfg |= S3C64XX_SPI_CH_HS_EN;
 
@@ -397,7 +424,6 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
 static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_transfer *xfer, int dma_mode)
 {
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	unsigned long val;
 	int ms;
@@ -414,7 +440,7 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
 		val = msecs_to_loops(ms);
 		do {
 			status = readl(regs + S3C64XX_SPI_STATUS);
-		} while (RX_FIFO_LVL(status, sci) < xfer->len && --val);
+		} while (RX_FIFO_LVL(status, sdd) < xfer->len && --val);
 	}
 
 	if (!val)
@@ -433,8 +459,8 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
 		if (xfer->rx_buf == NULL) {
 			val = msecs_to_loops(10);
 			status = readl(regs + S3C64XX_SPI_STATUS);
-			while ((TX_FIFO_LVL(status, sci)
-				|| !S3C64XX_SPI_ST_TX_DONE(status, sci))
+			while ((TX_FIFO_LVL(status, sdd)
+				|| !S3C64XX_SPI_ST_TX_DONE(status, sdd))
 					&& --val) {
 				cpu_relax();
 				status = readl(regs + S3C64XX_SPI_STATUS);
@@ -483,12 +509,11 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
 
 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 {
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	u32 val;
 
 	/* Disable Clock */
-	if (sci->clk_from_cmu) {
+	if (sdd->port_conf->clk_from_cmu) {
 		clk_disable(sdd->src_clk);
 	} else {
 		val = readl(regs + S3C64XX_SPI_CLK_CFG);
@@ -532,7 +557,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 
 	writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
-	if (sci->clk_from_cmu) {
+	if (sdd->port_conf->clk_from_cmu) {
 		/* Configure Clock */
 		/* There is half-multiplier before the SPI */
 		clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
@@ -558,7 +583,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
 						struct spi_message *msg)
 {
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	struct device *dev = &sdd->pdev->dev;
 	struct spi_transfer *xfer;
 
@@ -574,7 +598,7 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
 	/* Map until end or first fail */
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 
-		if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+		if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
 			continue;
 
 		if (xfer->tx_buf != NULL) {
@@ -608,7 +632,6 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
 static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
 						struct spi_message *msg)
 {
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	struct device *dev = &sdd->pdev->dev;
 	struct spi_transfer *xfer;
 
@@ -617,7 +640,7 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 
-		if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+		if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
 			continue;
 
 		if (xfer->rx_buf != NULL
@@ -636,7 +659,6 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
 					    struct spi_message *msg)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
-	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	struct spi_device *spi = msg->spi;
 	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 	struct spi_transfer *xfer;
@@ -691,7 +713,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
 		}
 
 		/* Polling method for xfers not bigger than FIFO capacity */
-		if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+		if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
 			use_dma = 0;
 		else
 			use_dma = 1;
@@ -845,7 +867,7 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 	pm_runtime_get_sync(&sdd->pdev->dev);
 
 	/* Check if we can provide the requested rate */
-	if (!sci->clk_from_cmu) {
+	if (!sdd->port_conf->clk_from_cmu) {
 		u32 psr, speed;
 
 		/* Max possible */
@@ -926,7 +948,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
 	/* Disable Interrupts - we use Polling if not DMA mode */
 	writel(0, regs + S3C64XX_SPI_INT_EN);
 
-	if (!sci->clk_from_cmu)
+	if (!sdd->port_conf->clk_from_cmu)
 		writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
 				regs + S3C64XX_SPI_CLK_CFG);
 	writel(0, regs + S3C64XX_SPI_MODE_CFG);
@@ -947,6 +969,13 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
 	flush_fifo(sdd);
 }
 
+static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
+						struct platform_device *pdev)
+{
+	return (struct s3c64xx_spi_port_config *)
+			 platform_get_device_id(pdev)->driver_data;
+}
+
 static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 {
 	struct resource	*mem_res, *dmatx_res, *dmarx_res;
@@ -1005,6 +1034,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, master);
 
 	sdd = spi_master_get_devdata(master);
+	sdd->port_conf = s3c64xx_spi_get_port_config(pdev);
 	sdd->master = master;
 	sdd->cntrlr_info = sci;
 	sdd->pdev = pdev;
@@ -1013,10 +1043,11 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	sdd->tx_dma.direction = DMA_MEM_TO_DEV;
 	sdd->rx_dma.dmach = dmarx_res->start;
 	sdd->rx_dma.direction = DMA_DEV_TO_MEM;
+	sdd->port_id = pdev->id;
 
 	sdd->cur_bpw = 8;
 
-	master->bus_num = pdev->id;
+	master->bus_num = sdd->port_id;
 	master->setup = s3c64xx_spi_setup;
 	master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
 	master->transfer_one_message = s3c64xx_spi_transfer_one_message;
@@ -1076,7 +1107,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	}
 
 	/* Setup Deufult Mode */
-	s3c64xx_spi_hwinit(sdd, pdev->id);
+	s3c64xx_spi_hwinit(sdd, sdd->port_id);
 
 	spin_lock_init(&sdd->lock);
 	init_completion(&sdd->xfer_completion);
@@ -1101,7 +1132,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
 					"with %d Slaves attached\n",
-					pdev->id, master->num_chipselect);
+					sdd->port_id, master->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
 					mem_res->end, mem_res->start,
 					sdd->rx_dma.dmach, sdd->tx_dma.dmach);
@@ -1194,7 +1225,7 @@ static int s3c64xx_spi_resume(struct device *dev)
 	clk_enable(sdd->src_clk);
 	clk_enable(sdd->clk);
 
-	s3c64xx_spi_hwinit(sdd, pdev->id);
+	s3c64xx_spi_hwinit(sdd, sdd->port_id);
 
 	spi_master_resume(master);
 
@@ -1232,6 +1263,70 @@ static const struct dev_pm_ops s3c64xx_spi_pm = {
 			   s3c64xx_spi_runtime_resume, NULL)
 };
 
+struct s3c64xx_spi_port_config s3c2443_spi_port_config = {
+	.fifo_lvl_mask	= { 0x7f },
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= true,
+};
+
+struct s3c64xx_spi_port_config s3c6410_spi_port_config = {
+	.fifo_lvl_mask	= { 0x7f, 0x7F },
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+};
+
+struct s3c64xx_spi_port_config s5p64x0_spi_port_config = {
+	.fifo_lvl_mask	= { 0x1ff, 0x7F },
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+};
+
+struct s3c64xx_spi_port_config s5pc100_spi_port_config = {
+	.fifo_lvl_mask	= { 0x7f, 0x7F },
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= true,
+};
+
+struct s3c64xx_spi_port_config s5pv210_spi_port_config = {
+	.fifo_lvl_mask	= { 0x1ff, 0x7F },
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+	.high_speed	= true,
+};
+
+struct s3c64xx_spi_port_config exynos4_spi_port_config = {
+	.fifo_lvl_mask	= { 0x1ff, 0x7F, 0x7F },
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+	.high_speed	= true,
+	.clk_from_cmu	= true,
+};
+
+static struct platform_device_id s3c64xx_spi_driver_ids[] = {
+	{
+		.name		= "s3c2443-spi",
+		.driver_data	= (kernel_ulong_t)&s3c2443_spi_port_config,
+	}, {
+		.name		= "s3c6410-spi",
+		.driver_data	= (kernel_ulong_t)&s3c6410_spi_port_config,
+	}, {
+		.name		= "s5p64x0-spi",
+		.driver_data	= (kernel_ulong_t)&s5p64x0_spi_port_config,
+	}, {
+		.name		= "s5pc100-spi",
+		.driver_data	= (kernel_ulong_t)&s5pc100_spi_port_config,
+	}, {
+		.name		= "s5pv210-spi",
+		.driver_data	= (kernel_ulong_t)&s5pv210_spi_port_config,
+	}, {
+		.name		= "exynos4210-spi",
+		.driver_data	= (kernel_ulong_t)&exynos4_spi_port_config,
+	},
+	{ },
+};
+
 static struct platform_driver s3c64xx_spi_driver = {
 	.driver = {
 		.name	= "s3c64xx-spi",
@@ -1239,6 +1334,7 @@ static struct platform_driver s3c64xx_spi_driver = {
 		.pm = &s3c64xx_spi_pm,
 	},
 	.remove = s3c64xx_spi_remove,
+	.id_table = s3c64xx_spi_driver_ids,
 };
 MODULE_ALIAS("platform:s3c64xx-spi");