diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-01-15 12:34:35 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-01-15 12:34:35 -0800 |
commit | 793e039ea07191946b5ec136db00f8b03ee4a13e (patch) | |
tree | 8338b7d19af9a8f4d83b9bb509104ed06232b896 | |
parent | aa2797b30c322531981f24833b082446072d3c79 (diff) | |
parent | 97f9c5f211d1f063b1745370e6b4fd64d6adaeff (diff) |
Merge tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB driver fixes for 4.10-rc4 to resolve some
reported issues.
The "largest" here is a number of bugs being fixed in the ch341
usb-serial driver, to hopefully resolve the mess of different devices
floating around that use this driver that have been having problems
with the 4.10-rc1 release.
There's also a tiny musb fix that I missed in the last pull request,
as well as the traditional xhci fix rounding out the batch.
All have been in linux-next with no reported issues"
* tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: fix deadlock at host remove by running watchdog correctly
USB: serial: ch341: fix control-message error handling
usb: musb: fix runtime PM in debugfs
wusbcore: Fix one more crypto-on-the-stack bug
USB: serial: kl5kusb105: fix line-state error handling
USB: serial: ch341: fix baud rate and line-control handling
USB: serial: ch341: fix line settings after reset-resume
USB: serial: ch341: fix resume after reset
USB: serial: ch341: fix open error handling
USB: serial: ch341: fix modem-control and B0 handling
USB: serial: ch341: fix open and resume after B0
USB: serial: ch341: fix initial modem-control state
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 11 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 13 | ||||
-rw-r--r-- | drivers/usb/musb/musb_debugfs.c | 20 | ||||
-rw-r--r-- | drivers/usb/serial/ch341.c | 108 | ||||
-rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 9 | ||||
-rw-r--r-- | drivers/usb/wusbcore/crypto.c | 3 |
6 files changed, 98 insertions, 66 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 25f522b09dd9..e32029a31ca4 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -913,17 +913,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; - if (xhci->xhc_state & XHCI_STATE_REMOVING) { - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Stop EP timer ran, but another timer marked " - "xHCI as DYING, exiting."); - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but no command pending, " diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0c8deb9ed42d..9a0ec116654a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1534,19 +1534,6 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_urb_free_priv(urb_priv); return ret; } - if ((xhci->xhc_state & XHCI_STATE_DYING) || - (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Ep 0x%x: URB %p to be canceled on " - "non-responsive xHCI host.", - urb->ep->desc.bEndpointAddress, urb); - /* Let the stop endpoint command watchdog timer (which set this - * state) finish cleaning up the endpoint TD lists. We must - * have caught it in the middle of dropping a lock and giving - * back an URB. - */ - goto done; - } ep_index = xhci_get_endpoint_index(&urb->ep->desc); ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 4fef50e5c8c1..dd70c88419d2 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -114,6 +114,7 @@ static int musb_regdump_show(struct seq_file *s, void *unused) unsigned i; seq_printf(s, "MUSB (M)HDRC Register Dump\n"); + pm_runtime_get_sync(musb->controller); for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) { switch (musb_regmap[i].size) { @@ -132,6 +133,8 @@ static int musb_regdump_show(struct seq_file *s, void *unused) } } + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; } @@ -145,7 +148,10 @@ static int musb_test_mode_show(struct seq_file *s, void *unused) struct musb *musb = s->private; unsigned test; + pm_runtime_get_sync(musb->controller); test = musb_readb(musb->mregs, MUSB_TESTMODE); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); if (test & MUSB_TEST_FORCE_HOST) seq_printf(s, "force host\n"); @@ -194,11 +200,12 @@ static ssize_t musb_test_mode_write(struct file *file, u8 test; char buf[18]; + pm_runtime_get_sync(musb->controller); test = musb_readb(musb->mregs, MUSB_TESTMODE); if (test) { dev_err(musb->controller, "Error: test mode is already set. " "Please do USB Bus Reset to start a new test.\n"); - return count; + goto ret; } memset(buf, 0x00, sizeof(buf)); @@ -234,6 +241,9 @@ static ssize_t musb_test_mode_write(struct file *file, musb_writeb(musb->mregs, MUSB_TESTMODE, test); +ret: + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return count; } @@ -254,8 +264,13 @@ static int musb_softconnect_show(struct seq_file *s, void *unused) switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: case OTG_STATE_A_WAIT_BCON: + pm_runtime_get_sync(musb->controller); + reg = musb_readb(musb->mregs, MUSB_DEVCTL); connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0; + + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); break; default: connect = -1; @@ -284,6 +299,7 @@ static ssize_t musb_softconnect_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; + pm_runtime_get_sync(musb->controller); if (!strncmp(buf, "0", 1)) { switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: @@ -314,6 +330,8 @@ static ssize_t musb_softconnect_write(struct file *file, } } + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return count; } diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2597b83a8ae2..95aa5233726c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -95,6 +95,7 @@ struct ch341_private { unsigned baud_rate; /* set baud rate */ u8 line_control; /* set line control value RTS/DTR */ u8 line_status; /* active status of modem control inputs */ + u8 lcr; }; static void ch341_set_termios(struct tty_struct *tty, @@ -112,6 +113,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request, r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, value, index, NULL, 0, DEFAULT_TIMEOUT); + if (r < 0) + dev_err(&dev->dev, "failed to send control message: %d\n", r); return r; } @@ -129,11 +132,24 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - return r; + if (r < bufsize) { + if (r >= 0) { + dev_err(&dev->dev, + "short control message received (%d < %u)\n", + r, bufsize); + r = -EIO; + } + + dev_err(&dev->dev, "failed to receive control message: %d\n", + r); + return r; + } + + return 0; } -static int ch341_init_set_baudrate(struct usb_device *dev, - struct ch341_private *priv, unsigned ctrl) +static int ch341_set_baudrate_lcr(struct usb_device *dev, + struct ch341_private *priv, u8 lcr) { short a; int r; @@ -156,9 +172,19 @@ static int ch341_init_set_baudrate(struct usb_device *dev, factor = 0x10000 - factor; a = (factor & 0xff00) | divisor; - /* 0x9c is "enable SFR_UART Control register and timer" */ - r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, - 0x9c | (ctrl << 8), a | 0x80); + /* + * CH341A buffers data until a full endpoint-size packet (32 bytes) + * has been received unless bit 7 is set. + */ + a |= BIT(7); + + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a); + if (r) + return r; + + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr); + if (r) + return r; return r; } @@ -170,9 +196,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control) static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; unsigned long flags; buffer = kmalloc(size, GFP_KERNEL); @@ -183,14 +209,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); out: kfree(buffer); return r; @@ -200,9 +221,9 @@ out: kfree(buffer); static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; buffer = kmalloc(size, GFP_KERNEL); if (!buffer) @@ -232,7 +253,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_init_set_baudrate(dev, priv, 0); + r = ch341_set_baudrate_lcr(dev, priv, priv->lcr); if (r < 0) goto out; @@ -258,7 +279,6 @@ static int ch341_port_probe(struct usb_serial_port *port) spin_lock_init(&priv->lock); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(port->serial->dev, priv); if (r < 0) @@ -320,7 +340,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) r = ch341_configure(serial->dev, priv); if (r) - goto out; + return r; if (tty) ch341_set_termios(tty, port, NULL); @@ -330,12 +350,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - goto out; + return r; } r = usb_serial_generic_open(tty, port); + if (r) + goto err_kill_interrupt_urb; + + return 0; + +err_kill_interrupt_urb: + usb_kill_urb(port->interrupt_in_urb); -out: return r; + return r; } /* Old_termios contains the original termios settings and @@ -356,7 +383,6 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX; switch (C_CSIZE(tty)) { @@ -386,22 +412,25 @@ static void ch341_set_termios(struct tty_struct *tty, ctrl |= CH341_LCR_STOP_BITS_2; if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); - r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl); + priv->baud_rate = baud_rate; + + r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl); if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); tty_termios_copy_hw(&tty->termios, old_termios); + } else if (r == 0) { + priv->lcr = ctrl; } - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_handshake(port->serial->dev, priv->line_control); + spin_lock_irqsave(&priv->lock, flags); + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); } static void ch341_break_ctl(struct tty_struct *tty, int break_state) @@ -576,14 +605,23 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { - struct ch341_private *priv; - - priv = usb_get_serial_port_data(serial->port[0]); + struct usb_serial_port *port = serial->port[0]; + struct ch341_private *priv = usb_get_serial_port_data(port); + int ret; /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); - return 0; + if (tty_port_initialized(&port->port)) { + ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (ret) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + ret); + return ret; + } + } + + return usb_serial_generic_resume(serial); } static struct usb_serial_driver ch341_device = { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 0ee190fc1bf8..6cb45757818f 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, status_buf, KLSI_STATUSBUF_LEN, 10000 ); - if (rc < 0) - dev_err(&port->dev, "Reading line status failed (error = %d)\n", - rc); - else { + if (rc != KLSI_STATUSBUF_LEN) { + dev_err(&port->dev, "reading line status failed: %d\n", rc); + if (rc >= 0) + rc = -EIO; + } else { status = get_unaligned_le16(status_buf); dev_info(&port->serial->dev->dev, "read status %x %x\n", diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 79451f7ef1b7..062c205f0046 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -216,7 +216,6 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc, struct scatterlist sg[4], sg_dst; void *dst_buf; size_t dst_size; - const u8 bzero[16] = { 0 }; u8 iv[crypto_skcipher_ivsize(tfm_cbc)]; size_t zero_padding; @@ -261,7 +260,7 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc, sg_set_buf(&sg[1], &scratch->b1, sizeof(scratch->b1)); sg_set_buf(&sg[2], b, blen); /* 0 if well behaved :) */ - sg_set_buf(&sg[3], bzero, zero_padding); + sg_set_page(&sg[3], ZERO_PAGE(0), zero_padding, 0); sg_init_one(&sg_dst, dst_buf, dst_size); skcipher_request_set_tfm(req, tfm_cbc); |