summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorThierry Reding <thierry.reding@avionic-design.de>2012-09-18 10:57:10 +0200
committerLinus Walleij <linus.walleij@linaro.org>2012-09-18 23:27:25 +0200
commit5e969a401a0126806cc2a358800b5b52d6c0a246 (patch)
treebf1abac453b63d37222331cb414e2a783ae9887b
parentd724f1c9c3c7dee420b8d778ee53207ef3c17120 (diff)
gpio: Add Avionic Design N-bit GPIO expander support
This commit adds a driver for the Avionic Design N-bit GPIO expander. The expander provides a variable number of GPIO pins with interrupt support. Changes in v2: - allow building the driver as a module - assign of_node unconditionally - use linear mapping IRQ domain - properly cleanup IRQ domain - add OF device table and annotate device tables - emulate rising and falling edge triggers - increase #gpio-cells to 2 - drop support for !OF - use IS_ENABLED to conditionalize DEBUG_FS code Changes in v3: - make IRQ support runtime configurable (interrupt-controller property) - drop interrupt-controller and #interrupt-cells from DT binding - add inline to_adnp() function to wrap container_of() macro - consistently use adnp as name for struct adnp variables - remove irq_mask_cur and rename irq_mask to irq_enable - fix a subtle deadlock in adnp_gpio_direction_output() - remove dynamic allocations from debugfs code - rename regs to num_regs to avoid confusion - annotate non-trivial code with comments - don't acquire mutex in adnp_gpio_get() - assume NO_IRQ == 0 Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-adnp.txt30
-rw-r--r--drivers/gpio/Kconfig11
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-adnp.c611
4 files changed, 653 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
new file mode 100644
index 000000000000..5a09a216fe65
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
@@ -0,0 +1,30 @@
+Avionic Design N-bit GPIO expander bindings
+
+Required properties:
+- compatible: should be "ad,gpio-adnp"
+- reg: The I2C slave address for this device.
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+ second cell is used to specify optional parameters:
+ - bit 0: polarity (0: normal, 1: inverted)
+- gpio-controller: Marks the device as a GPIO controller
+- nr-gpios: The number of pins supported by the controller.
+
+Example:
+
+ gpioext: gpio-controller@41 {
+ compatible = "ad,gpio-adnp";
+ reg = <0x41>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <160 1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ nr-gpios = <64>;
+ };
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 2f2a3b86b985..bf48c74ba4a0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -444,6 +444,17 @@ config GPIO_ADP5588_IRQ
Say yes here to enable the adp5588 to be used as an interrupt
controller. It requires the driver to be built in the kernel.
+config GPIO_ADNP
+ tristate "Avionic Design N-bit GPIO expander"
+ depends on I2C && OF
+ help
+ This option enables support for N GPIOs found on Avionic Design
+ I2C GPIO expanders. The register space will be extended by powers
+ of two, so the controller will need to accomodate for that. For
+ example: if a controller provides 48 pins, 6 registers will be
+ enough to represent all pins, but the driver will assume a
+ register layout for 64 pins (8 registers).
+
comment "PCI GPIO expanders:"
config GPIO_CS5535
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 153caceeb053..710f2b6f6f04 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o
+obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
new file mode 100644
index 000000000000..3df88336415e
--- /dev/null
+++ b/drivers/gpio/gpio-adnp.c
@@ -0,0 +1,611 @@
+/*
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#define GPIO_DDR(gpio) (0x00 << (gpio)->reg_shift)
+#define GPIO_PLR(gpio) (0x01 << (gpio)->reg_shift)
+#define GPIO_IER(gpio) (0x02 << (gpio)->reg_shift)
+#define GPIO_ISR(gpio) (0x03 << (gpio)->reg_shift)
+#define GPIO_PTR(gpio) (0x04 << (gpio)->reg_shift)
+
+struct adnp {
+ struct i2c_client *client;
+ struct gpio_chip gpio;
+ unsigned int reg_shift;
+
+ struct mutex i2c_lock;
+
+ struct irq_domain *domain;
+ struct mutex irq_lock;
+
+ u8 *irq_enable;
+ u8 *irq_level;
+ u8 *irq_rise;
+ u8 *irq_fall;
+ u8 *irq_high;
+ u8 *irq_low;
+};
+
+static inline struct adnp *to_adnp(struct gpio_chip *chip)
+{
+ return container_of(chip, struct adnp, gpio);
+}
+
+static int adnp_read(struct adnp *adnp, unsigned offset, uint8_t *value)
+{
+ int err;
+
+ err = i2c_smbus_read_byte_data(adnp->client, offset);
+ if (err < 0) {
+ dev_err(adnp->gpio.dev, "%s failed: %d\n",
+ "i2c_smbus_read_byte_data()", err);
+ return err;
+ }
+
+ *value = err;
+ return 0;
+}
+
+static int adnp_write(struct adnp *adnp, unsigned offset, uint8_t value)
+{
+ int err;
+
+ err = i2c_smbus_write_byte_data(adnp->client, offset, value);
+ if (err < 0) {
+ dev_err(adnp->gpio.dev, "%s failed: %d\n",
+ "i2c_smbus_write_byte_data()", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int adnp_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct adnp *adnp = to_adnp(chip);
+ unsigned int reg = offset >> adnp->reg_shift;
+ unsigned int pos = offset & 7;
+ u8 value;
+ int err;
+
+ err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &value);
+ if (err < 0)
+ return err;
+
+ return (value & BIT(pos)) ? 1 : 0;
+}
+
+static void __adnp_gpio_set(struct adnp *adnp, unsigned offset, int value)
+{
+ unsigned int reg = offset >> adnp->reg_shift;
+ unsigned int pos = offset & 7;
+ int err;
+ u8 val;
+
+ err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &val);
+ if (err < 0)
+ return;
+
+ if (value)
+ val |= BIT(pos);
+ else
+ val &= ~BIT(pos);
+
+ adnp_write(adnp, GPIO_PLR(adnp) + reg, val);
+}
+
+static void adnp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct adnp *adnp = to_adnp(chip);
+
+ mutex_lock(&adnp->i2c_lock);
+ __adnp_gpio_set(adnp, offset, value);
+ mutex_unlock(&adnp->i2c_lock);
+}
+
+static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct adnp *adnp = to_adnp(chip);
+ unsigned int reg = offset >> adnp->reg_shift;
+ unsigned int pos = offset & 7;
+ u8 value;
+ int err;
+
+ mutex_lock(&adnp->i2c_lock);
+
+ err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
+ if (err < 0)
+ goto out;
+
+ value &= ~BIT(pos);
+
+ err = adnp_write(adnp, GPIO_DDR(adnp) + reg, value);
+ if (err < 0)
+ goto out;
+
+ err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
+ if (err < 0)
+ goto out;
+
+ if (err & BIT(pos))
+ err = -EACCES;
+
+ err = 0;
+
+out:
+ mutex_unlock(&adnp->i2c_lock);
+ return err;
+}
+
+static int adnp_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct adnp *adnp = to_adnp(chip);
+ unsigned int reg = offset >> adnp->reg_shift;
+ unsigned int pos = offset & 7;
+ int err;
+ u8 val;
+
+ mutex_lock(&adnp->i2c_lock);
+
+ err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
+ if (err < 0)
+ goto out;
+
+ val |= BIT(pos);
+
+ err = adnp_write(adnp, GPIO_DDR(adnp) + reg, val);
+ if (err < 0)
+ goto out;
+
+ err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
+ if (err < 0)
+ goto out;
+
+ if (!(val & BIT(pos))) {
+ err = -EPERM;
+ goto out;
+ }
+
+ __adnp_gpio_set(adnp, offset, value);
+ err = 0;
+
+out:
+ mutex_unlock(&adnp->i2c_lock);
+ return err;
+}
+
+static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct adnp *adnp = to_adnp(chip);
+ unsigned int num_regs = 1 << adnp->reg_shift, i, j;
+ int err;
+
+ for (i = 0; i < num_regs; i++) {
+ u8 ddr, plr, ier, isr;
+
+ mutex_lock(&adnp->i2c_lock);
+
+ err = adnp_read(adnp, GPIO_DDR(adnp) + i, &ddr);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ return;
+ }
+
+ err = adnp_read(adnp, GPIO_PLR(adnp) + i, &plr);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ return;
+ }
+
+ err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ return;
+ }
+
+ err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ return;
+ }
+
+ mutex_unlock(&adnp->i2c_lock);
+
+ for (j = 0; j < 8; j++) {
+ unsigned int bit = (i << adnp->reg_shift) + j;
+ const char *direction = "input ";
+ const char *level = "low ";
+ const char *interrupt = "disabled";
+ const char *pending = "";
+
+ if (ddr & BIT(j))
+ direction = "output";
+
+ if (plr & BIT(j))
+ level = "high";
+
+ if (ier & BIT(j))
+ interrupt = "enabled ";
+
+ if (isr & BIT(j))
+ pending = "pending";
+
+ seq_printf(s, "%2u: %s %s IRQ %s %s\n", bit,
+ direction, level, interrupt, pending);
+ }
+ }
+}
+
+static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios)
+{
+ struct gpio_chip *chip = &adnp->gpio;
+
+ adnp->reg_shift = get_count_order(num_gpios) - 3;
+
+ chip->direction_input = adnp_gpio_direction_input;
+ chip->direction_output = adnp_gpio_direction_output;
+ chip->get = adnp_gpio_get;
+ chip->set = adnp_gpio_set;
+ chip->can_sleep = 1;
+
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ chip->dbg_show = adnp_gpio_dbg_show;
+
+ chip->base = -1;
+ chip->ngpio = num_gpios;
+ chip->label = adnp->client->name;
+ chip->dev = &adnp->client->dev;
+ chip->of_node = chip->dev->of_node;
+ chip->owner = THIS_MODULE;
+
+ return 0;
+}
+
+static irqreturn_t adnp_irq(int irq, void *data)
+{
+ struct adnp *adnp = data;
+ unsigned int num_regs, i;
+
+ num_regs = 1 << adnp->reg_shift;
+
+ for (i = 0; i < num_regs; i++) {
+ unsigned int base = i << adnp->reg_shift, bit;
+ u8 changed, level, isr, ier;
+ unsigned long pending;
+ int err;
+
+ mutex_lock(&adnp->i2c_lock);
+
+ err = adnp_read(adnp, GPIO_PLR(adnp) + i, &level);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ continue;
+ }
+
+ err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ continue;
+ }
+
+ err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
+ if (err < 0) {
+ mutex_unlock(&adnp->i2c_lock);
+ continue;
+ }
+
+ mutex_unlock(&adnp->i2c_lock);
+
+ /* determine pins that changed levels */
+ changed = level ^ adnp->irq_level[i];
+
+ /* compute edge-triggered interrupts */
+ pending = changed & ((adnp->irq_fall[i] & ~level) |
+ (adnp->irq_rise[i] & level));
+
+ /* add in level-triggered interrupts */
+ pending |= (adnp->irq_high[i] & level) |
+ (adnp->irq_low[i] & ~level);
+
+ /* mask out non-pending and disabled interrupts */
+ pending &= isr & ier;
+
+ for_each_set_bit(bit, &pending, 8) {
+ unsigned int virq;
+ virq = irq_find_mapping(adnp->domain, base + bit);
+ handle_nested_irq(virq);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int adnp_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct adnp *adnp = to_adnp(chip);
+ return irq_create_mapping(adnp->domain, offset);
+}
+
+static void adnp_irq_mask(struct irq_data *data)
+{
+ struct adnp *adnp = irq_data_get_irq_chip_data(data);
+ unsigned int reg = data->hwirq >> adnp->reg_shift;
+ unsigned int pos = data->hwirq & 7;
+
+ adnp->irq_enable[reg] &= ~BIT(pos);
+}
+
+static void adnp_irq_unmask(struct irq_data *data)
+{
+ struct adnp *adnp = irq_data_get_irq_chip_data(data);
+ unsigned int reg = data->hwirq >> adnp->reg_shift;
+ unsigned int pos = data->hwirq & 7;
+
+ adnp->irq_enable[reg] |= BIT(pos);
+}
+
+static int adnp_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct adnp *adnp = irq_data_get_irq_chip_data(data);
+ unsigned int reg = data->hwirq >> adnp->reg_shift;
+ unsigned int pos = data->hwirq & 7;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ adnp->irq_rise[reg] |= BIT(pos);
+ else
+ adnp->irq_rise[reg] &= ~BIT(pos);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ adnp->irq_fall[reg] |= BIT(pos);
+ else
+ adnp->irq_fall[reg] &= ~BIT(pos);
+
+ if (type & IRQ_TYPE_LEVEL_HIGH)
+ adnp->irq_high[reg] |= BIT(pos);
+ else
+ adnp->irq_high[reg] &= ~BIT(pos);
+
+ if (type & IRQ_TYPE_LEVEL_LOW)
+ adnp->irq_low[reg] |= BIT(pos);
+ else
+ adnp->irq_low[reg] &= ~BIT(pos);
+
+ return 0;
+}
+
+static void adnp_irq_bus_lock(struct irq_data *data)
+{
+ struct adnp *adnp = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&adnp->irq_lock);
+}
+
+static void adnp_irq_bus_unlock(struct irq_data *data)
+{
+ struct adnp *adnp = irq_data_get_irq_chip_data(data);
+ unsigned int num_regs = 1 << adnp->reg_shift, i;
+
+ mutex_lock(&adnp->i2c_lock);
+
+ for (i = 0; i < num_regs; i++)
+ adnp_write(adnp, GPIO_IER(adnp) + i, adnp->irq_enable[i]);
+
+ mutex_unlock(&adnp->i2c_lock);
+ mutex_unlock(&adnp->irq_lock);
+}
+
+static struct irq_chip adnp_irq_chip = {
+ .name = "gpio-adnp",
+ .irq_mask = adnp_irq_mask,
+ .irq_unmask = adnp_irq_unmask,
+ .irq_set_type = adnp_irq_set_type,
+ .irq_bus_lock = adnp_irq_bus_lock,
+ .irq_bus_sync_unlock = adnp_irq_bus_unlock,
+};
+
+static int adnp_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip(irq, &adnp_irq_chip);
+ irq_set_nested_thread(irq, true);
+
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+
+ return 0;
+}
+
+static const struct irq_domain_ops adnp_irq_domain_ops = {
+ .map = adnp_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int adnp_irq_setup(struct adnp *adnp)
+{
+ unsigned int num_regs = 1 << adnp->reg_shift, i;
+ struct gpio_chip *chip = &adnp->gpio;
+ int err;
+
+ mutex_init(&adnp->irq_lock);
+
+ /*
+ * Allocate memory to keep track of the current level and trigger
+ * modes of the interrupts. To avoid multiple allocations, a single
+ * large buffer is allocated and pointers are setup to point at the
+ * corresponding offsets. For consistency, the layout of the buffer
+ * is chosen to match the register layout of the hardware in that
+ * each segment contains the corresponding bits for all interrupts.
+ */
+ adnp->irq_enable = devm_kzalloc(chip->dev, num_regs * 6, GFP_KERNEL);
+ if (!adnp->irq_enable)
+ return -ENOMEM;
+
+ adnp->irq_level = adnp->irq_enable + (num_regs * 1);
+ adnp->irq_rise = adnp->irq_enable + (num_regs * 2);
+ adnp->irq_fall = adnp->irq_enable + (num_regs * 3);
+ adnp->irq_high = adnp->irq_enable + (num_regs * 4);
+ adnp->irq_low = adnp->irq_enable + (num_regs * 5);
+
+ for (i = 0; i < num_regs; i++) {
+ /*
+ * Read the initial level of all pins to allow the emulation
+ * of edge triggered interrupts.
+ */
+ err = adnp_read(adnp, GPIO_PLR(adnp) + i, &adnp->irq_level[i]);
+ if (err < 0)
+ return err;
+
+ /* disable all interrupts */
+ err = adnp_write(adnp, GPIO_IER(adnp) + i, 0);
+ if (err < 0)
+ return err;
+
+ adnp->irq_enable[i] = 0x00;
+ }
+
+ adnp->domain = irq_domain_add_linear(chip->of_node, chip->ngpio,
+ &adnp_irq_domain_ops, adnp);
+
+ err = request_threaded_irq(adnp->client->irq, NULL, adnp_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ dev_name(chip->dev), adnp);
+ if (err != 0) {
+ dev_err(chip->dev, "can't request IRQ#%d: %d\n",
+ adnp->client->irq, err);
+ goto error;
+ }
+
+ chip->to_irq = adnp_gpio_to_irq;
+ return 0;
+
+error:
+ irq_domain_remove(adnp->domain);
+ return err;
+}
+
+static void adnp_irq_teardown(struct adnp *adnp)
+{
+ unsigned int irq, i;
+
+ free_irq(adnp->client->irq, adnp);
+
+ for (i = 0; i < adnp->gpio.ngpio; i++) {
+ irq = irq_find_mapping(adnp->domain, i);
+ if (irq > 0)
+ irq_dispose_mapping(irq);
+ }
+
+ irq_domain_remove(adnp->domain);
+}
+
+static __devinit int adnp_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = client->dev.of_node;
+ struct adnp *adnp;
+ u32 num_gpios;
+ int err;
+
+ err = of_property_read_u32(np, "nr-gpios", &num_gpios);
+ if (err < 0)
+ return err;
+
+ client->irq = irq_of_parse_and_map(np, 0);
+ if (!client->irq)
+ return -EPROBE_DEFER;
+
+ adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL);
+ if (!adnp)
+ return -ENOMEM;
+
+ mutex_init(&adnp->i2c_lock);
+ adnp->client = client;
+
+ err = adnp_gpio_setup(adnp, num_gpios);
+ if (err < 0)
+ return err;
+
+ if (of_find_property(np, "interrupt-controller", NULL)) {
+ err = adnp_irq_setup(adnp);
+ if (err < 0)
+ goto teardown;
+ }
+
+ err = gpiochip_add(&adnp->gpio);
+ if (err < 0)
+ goto teardown;
+
+ i2c_set_clientdata(client, adnp);
+ return 0;
+
+teardown:
+ if (of_find_property(np, "interrupt-controller", NULL))
+ adnp_irq_teardown(adnp);
+
+ return err;
+}
+
+static __devexit int adnp_i2c_remove(struct i2c_client *client)
+{
+ struct adnp *adnp = i2c_get_clientdata(client);
+ struct device_node *np = client->dev.of_node;
+ int err;
+
+ err = gpiochip_remove(&adnp->gpio);
+ if (err < 0) {
+ dev_err(&client->dev, "%s failed: %d\n", "gpiochip_remove()",
+ err);
+ return err;
+ }
+
+ if (of_find_property(np, "interrupt-controller", NULL))
+ adnp_irq_teardown(adnp);
+
+ return 0;
+}
+
+static const struct i2c_device_id adnp_i2c_id[] __devinitconst = {
+ { "gpio-adnp" },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, adnp_i2c_id);
+
+static const struct of_device_id adnp_of_match[] __devinitconst = {
+ { .compatible = "ad,gpio-adnp", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, adnp_of_match);
+
+static struct i2c_driver adnp_i2c_driver = {
+ .driver = {
+ .name = "gpio-adnp",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(adnp_of_match),
+ },
+ .probe = adnp_i2c_probe,
+ .remove = __devexit_p(adnp_i2c_remove),
+ .id_table = adnp_i2c_id,
+};
+module_i2c_driver(adnp_i2c_driver);
+
+MODULE_DESCRIPTION("Avionic Design N-bit GPIO expander");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_LICENSE("GPL");