[OMAP850] IRQ related changes

IRQ related changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

2 files changed, 99 insertions, 3 deletions

diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9ad5197075ff..de03c8448994 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -145,6 +145,14 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct omap_irq_bank omap850_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -184,6 +192,12 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		irq_banks = omap850_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+	}
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -214,9 +228,8 @@ void __init omap_init_irq(void)
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
 	/* Enable interrupts in global mask */
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx())
 		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-	}
 
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
@@ -236,6 +249,8 @@ void __init omap_init_irq(void)
 
 	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
+	else if (cpu_is_omap850())
+		omap_unmask_irq(INT_850_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index bed5274c910a..7f57ee66f364 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -105,6 +105,29 @@
 #define INT_730_SPGIO_WR	29
 
 /*
+ * OMAP-850 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_850_IH2_FIQ		0
+#define INT_850_IH2_IRQ		1
+#define INT_850_USB_NON_ISO	2
+#define INT_850_USB_ISO		3
+#define INT_850_ICR		4
+#define INT_850_EAC		5
+#define INT_850_GPIO_BANK1	6
+#define INT_850_GPIO_BANK2	7
+#define INT_850_GPIO_BANK3	8
+#define INT_850_McBSP2TX	10
+#define INT_850_McBSP2RX	11
+#define INT_850_McBSP2RX_OVF	12
+#define INT_850_LCD_LINE	14
+#define INT_850_GSM_PROTECT	15
+#define INT_850_TIMER3		16
+#define INT_850_GPIO_BANK5	17
+#define INT_850_GPIO_BANK6	18
+#define INT_850_SPGIO_WR	29
+
+
+/*
  * IRQ numbers for interrupt handler 2
  *
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
@@ -237,6 +260,64 @@
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)
 
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_850_HW_ERRORS	(0 + IH2_BASE)
+#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_850_CFCD		(2 + IH2_BASE)
+#define INT_850_CFIREQ		(3 + IH2_BASE)
+#define INT_850_I2C		(4 + IH2_BASE)
+#define INT_850_PCC		(5 + IH2_BASE)
+#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_850_SPI_100K_1	(7 + IH2_BASE)
+#define INT_850_SYREN_SPI	(8 + IH2_BASE)
+#define INT_850_VLYNQ		(9 + IH2_BASE)
+#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_850_McBSP1TX	(11 + IH2_BASE)
+#define INT_850_McBSP1RX	(12 + IH2_BASE)
+#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_850_MCSI		(16 + IH2_BASE)
+#define INT_850_uWireTX		(17 + IH2_BASE)
+#define INT_850_uWireRX		(18 + IH2_BASE)
+#define INT_850_SMC_CD		(19 + IH2_BASE)
+#define INT_850_SMC_IREQ	(20 + IH2_BASE)
+#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_850_TIMER32K	(22 + IH2_BASE)
+#define INT_850_MMC_SDIO	(23 + IH2_BASE)
+#define INT_850_UPLD		(24 + IH2_BASE)
+#define INT_850_USB_HHC_1	(27 + IH2_BASE)
+#define INT_850_USB_HHC_2	(28 + IH2_BASE)
+#define INT_850_USB_GENI	(29 + IH2_BASE)
+#define INT_850_USB_OTG		(30 + IH2_BASE)
+#define INT_850_CAMERA_IF	(31 + IH2_BASE)
+#define INT_850_RNG		(32 + IH2_BASE)
+#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_850_SHA1_MD5	(36 + IH2_BASE)
+#define INT_850_SPI_100K_2	(37 + IH2_BASE)
+#define INT_850_RNG_IDLE	(38 + IH2_BASE)
+#define INT_850_MPUIO		(39 + IH2_BASE)
+#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_850_DMA_CH6		(53 + IH2_BASE)
+#define INT_850_DMA_CH7		(54 + IH2_BASE)
+#define INT_850_DMA_CH8		(55 + IH2_BASE)
+#define INT_850_DMA_CH9		(56 + IH2_BASE)
+#define INT_850_DMA_CH10	(57 + IH2_BASE)
+#define INT_850_DMA_CH11	(58 + IH2_BASE)
+#define INT_850_DMA_CH12	(59 + IH2_BASE)
+#define INT_850_DMA_CH13	(60 + IH2_BASE)
+#define INT_850_DMA_CH14	(61 + IH2_BASE)
+#define INT_850_DMA_CH15	(62 + IH2_BASE)
+#define INT_850_NAND		(63 + IH2_BASE)
+
 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
 #define INT_24XX_SDMA_IRQ1	13
@@ -341,7 +422,7 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
 #define IH_GPIO_BASE		(128 + IH2_BASE)