diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2006-09-27 12:53:28 -0700 |
---|---|---|
committer | Auke Kok <juke-jan.h.kok@intel.com> | 2006-09-27 12:53:28 -0700 |
commit | 11241b106937ec470e0220ae5ce98c8ea27fd700 (patch) | |
tree | 040261cc937c59211001bc300a007fb162c69fd6 | |
parent | 975b366af66280ed5b852a1a0446586ce71e306e (diff) |
e1000: rename flow control symbols
Sogned-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
-rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 14 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.c | 84 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.h | 10 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_param.c | 12 |
4 files changed, 60 insertions, 60 deletions
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index dd9576bc23c4..02193a19ab1e 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -228,11 +228,11 @@ e1000_get_pauseparam(struct net_device *netdev, pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - if (hw->fc == e1000_fc_rx_pause) + if (hw->fc == E1000_FC_RX_PAUSE) pause->rx_pause = 1; - else if (hw->fc == e1000_fc_tx_pause) + else if (hw->fc == E1000_FC_TX_PAUSE) pause->tx_pause = 1; - else if (hw->fc == e1000_fc_full) { + else if (hw->fc == E1000_FC_FULL) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -252,13 +252,13 @@ e1000_set_pauseparam(struct net_device *netdev, msleep(1); if (pause->rx_pause && pause->tx_pause) - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; else if (pause->rx_pause && !pause->tx_pause) - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; else if (!pause->rx_pause && pause->tx_pause) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else if (!pause->rx_pause && !pause->tx_pause) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; hw->original_fc = hw->fc; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index c69f6c0512e3..b3e95c1a1dab 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1017,11 +1017,11 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if (hw->fc == e1000_fc_default) { + if (hw->fc == E1000_FC_DEFAULT) { switch (hw->mac_type) { case e1000_ich8lan: case e1000_82573: - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; default: ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, @@ -1031,12 +1031,12 @@ e1000_setup_link(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; } } @@ -1046,10 +1046,10 @@ e1000_setup_link(struct e1000_hw *hw) * hub or switch with different Flow Control capabilities. */ if (hw->mac_type == e1000_82542_rev2_0) - hw->fc &= (~e1000_fc_tx_pause); + hw->fc &= (~E1000_FC_TX_PAUSE); if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) - hw->fc &= (~e1000_fc_rx_pause); + hw->fc &= (~E1000_FC_RX_PAUSE); hw->original_fc = hw->fc; @@ -1101,7 +1101,7 @@ e1000_setup_link(struct e1000_hw *hw) * ability to transmit pause frames in not enabled, then these * registers will be set to 0. */ - if (!(hw->fc & e1000_fc_tx_pause)) { + if (!(hw->fc & E1000_FC_TX_PAUSE)) { E1000_WRITE_REG(hw, FCRTL, 0); E1000_WRITE_REG(hw, FCRTH, 0); } else { @@ -1188,11 +1188,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) are enabled. */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: /* Flow control is completely disabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: /* RX Flow control is enabled and TX Flow control is disabled by a * software over-ride. Since there really isn't a way to advertise * that we are capable of RX Pause ONLY, we will advertise that we @@ -1201,13 +1201,13 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: /* TX Flow control is enabled, and RX Flow control is disabled, by a * software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; - case e1000_fc_full: + case E1000_FC_FULL: /* Flow control (both RX and TX) is enabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; @@ -2123,13 +2123,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) * in the EEPROM is used. */ switch (hw->fc) { - case e1000_fc_none: /* 0 */ + case E1000_FC_NONE: /* 0 */ /* Flow control (RX & TX) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_rx_pause: /* 1 */ + case E1000_FC_RX_PAUSE: /* 1 */ /* RX Flow control is enabled, and TX Flow control is * disabled, by a software over-ride. */ @@ -2141,14 +2141,14 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_tx_pause: /* 2 */ + case E1000_FC_TX_PAUSE: /* 2 */ /* TX Flow control is enabled, and RX Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; - case e1000_fc_full: /* 3 */ + case E1000_FC_FULL: /* 3 */ /* Flow control (both RX and TX) is enabled by a software * over-ride. */ @@ -2192,7 +2192,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_force_speed_duplex"); /* Turn off Flow control if we are forcing speed and duplex. */ - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT1("hw->fc = %d\n", hw->fc); @@ -2546,18 +2546,18 @@ e1000_force_mac_fc(struct e1000_hw *hw) */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: ctrl &= (~E1000_CTRL_TFCE); ctrl |= E1000_CTRL_RFCE; break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: ctrl &= (~E1000_CTRL_RFCE); ctrl |= E1000_CTRL_TFCE; break; - case e1000_fc_full: + case E1000_FC_FULL: ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: @@ -2656,14 +2656,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 0 | 0 | DC | DC | E1000_FC_NONE + * 0 | 1 | 0 | DC | E1000_FC_NONE + * 0 | 1 | 1 | 0 | E1000_FC_NONE + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * 1 | 0 | 0 | DC | E1000_FC_NONE + * 1 | DC | 1 | DC | E1000_FC_FULL + * 1 | 1 | 0 | 0 | E1000_FC_NONE + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ /* Are both PAUSE bits set to 1? If so, this implies @@ -2675,7 +2675,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | e1000_fc_full + * 1 | DC | 1 | DC | E1000_FC_FULL * */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && @@ -2686,11 +2686,11 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if (hw->original_fc == e1000_fc_full) { - hw->fc = e1000_fc_full; + if (hw->original_fc == E1000_FC_FULL) { + hw->fc = E1000_FC_FULL; DEBUGOUT("Flow Control = FULL.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } } @@ -2699,14 +2699,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE * */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); } /* For transmitting PAUSE frames ONLY. @@ -2714,14 +2714,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } /* Per the IEEE spec, at this point flow control should be @@ -2744,13 +2744,13 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->original_fc == e1000_fc_none || - hw->original_fc == e1000_fc_tx_pause) || + else if ((hw->original_fc == E1000_FC_NONE || + hw->original_fc == E1000_FC_TX_PAUSE) || hw->fc_strict_ieee) { - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT("Flow Control = NONE.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } @@ -2765,7 +2765,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) } if (duplex == HALF_DUPLEX) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 55fffad4e869..798dc031a7c6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -92,11 +92,11 @@ typedef enum { /* Flow Control Settings */ typedef enum { - e1000_fc_none = 0, - e1000_fc_rx_pause = 1, - e1000_fc_tx_pause = 2, - e1000_fc_full = 3, - e1000_fc_default = 0xFF + E1000_FC_NONE = 0, + E1000_FC_RX_PAUSE = 1, + E1000_FC_TX_PAUSE = 2, + E1000_FC_FULL = 3, + E1000_FC_DEFAULT = 0xFF } e1000_fc_type; struct e1000_shadow_ram { diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 85eb6bcc3249..9c3c1acefccc 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -396,17 +396,17 @@ e1000_check_options(struct e1000_adapter *adapter) { /* Flow Control */ struct e1000_opt_list fc_list[] = - {{ e1000_fc_none, "Flow Control Disabled" }, - { e1000_fc_rx_pause,"Flow Control Receive Only" }, - { e1000_fc_tx_pause,"Flow Control Transmit Only" }, - { e1000_fc_full, "Flow Control Enabled" }, - { e1000_fc_default, "Flow Control Hardware Default" }}; + {{ E1000_FC_NONE, "Flow Control Disabled" }, + { E1000_FC_RX_PAUSE,"Flow Control Receive Only" }, + { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" }, + { E1000_FC_FULL, "Flow Control Enabled" }, + { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; struct e1000_option opt = { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", - .def = e1000_fc_default, + .def = E1000_FC_DEFAULT, .arg = { .l = { .nr = ARRAY_SIZE(fc_list), .p = fc_list }} }; |