1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
|
// SPDX-License-Identifier: GPL-2.0
/*
* Hardware monitoring driver for Maxim MAX16601
*
* Implementation notes:
*
* Ths chip supports two rails, VCORE and VSA. Telemetry information for the
* two rails is reported in two subsequent I2C addresses. The driver
* instantiates a dummy I2C client at the second I2C address to report
* information for the VSA rail in a single instance of the driver.
* Telemetry for the VSA rail is reported to the PMBus core in PMBus page 2.
*
* The chip reports input current using two separate methods. The input current
* reported with the standard READ_IIN command is derived from the output
* current. The first method is reported to the PMBus core with PMBus page 0,
* the second method is reported with PMBus page 1.
*
* The chip supports reading per-phase temperatures and per-phase input/output
* currents for VCORE. Telemetry is reported in vendor specific registers.
* The driver translates the vendor specific register values to PMBus standard
* register values and reports per-phase information in PMBus page 0.
*
* Copyright 2019, 2020 Google LLC.
*/
#include <linux/bits.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include "pmbus.h"
#define REG_DEFAULT_NUM_POP 0xc4
#define REG_SETPT_DVID 0xd1
#define DAC_10MV_MODE BIT(4)
#define REG_IOUT_AVG_PK 0xee
#define REG_IIN_SENSOR 0xf1
#define REG_TOTAL_INPUT_POWER 0xf2
#define REG_PHASE_ID 0xf3
#define CORE_RAIL_INDICATOR BIT(7)
#define REG_PHASE_REPORTING 0xf4
#define MAX16601_NUM_PHASES 8
struct max16601_data {
struct pmbus_driver_info info;
struct i2c_client *vsa;
int iout_avg_pkg;
};
#define to_max16601_data(x) container_of(x, struct max16601_data, info)
static int max16601_read_byte(struct i2c_client *client, int page, int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct max16601_data *data = to_max16601_data(info);
if (page > 0) {
if (page == 2) /* VSA */
return i2c_smbus_read_byte_data(data->vsa, reg);
return -EOPNOTSUPP;
}
return -ENODATA;
}
static int max16601_read_word(struct i2c_client *client, int page, int phase,
int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct max16601_data *data = to_max16601_data(info);
u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
int ret;
switch (page) {
case 0: /* VCORE */
if (phase == 0xff)
return -ENODATA;
switch (reg) {
case PMBUS_READ_IIN:
case PMBUS_READ_IOUT:
case PMBUS_READ_TEMPERATURE_1:
ret = i2c_smbus_write_byte_data(client, REG_PHASE_ID,
phase);
if (ret)
return ret;
ret = i2c_smbus_read_block_data(client,
REG_PHASE_REPORTING,
buf);
if (ret < 0)
return ret;
if (ret < 6)
return -EIO;
switch (reg) {
case PMBUS_READ_TEMPERATURE_1:
return buf[1] << 8 | buf[0];
case PMBUS_READ_IOUT:
return buf[3] << 8 | buf[2];
case PMBUS_READ_IIN:
return buf[5] << 8 | buf[4];
default:
break;
}
}
return -EOPNOTSUPP;
case 1: /* VCORE, read IIN/PIN from sensor element */
switch (reg) {
case PMBUS_READ_IIN:
return i2c_smbus_read_word_data(client, REG_IIN_SENSOR);
case PMBUS_READ_PIN:
return i2c_smbus_read_word_data(client,
REG_TOTAL_INPUT_POWER);
default:
break;
}
return -EOPNOTSUPP;
case 2: /* VSA */
switch (reg) {
case PMBUS_VIRT_READ_IOUT_MAX:
ret = i2c_smbus_read_word_data(data->vsa,
REG_IOUT_AVG_PK);
if (ret < 0)
return ret;
if (sign_extend32(ret, 10) >
sign_extend32(data->iout_avg_pkg, 10))
data->iout_avg_pkg = ret;
return data->iout_avg_pkg;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
return 0;
case PMBUS_IOUT_OC_FAULT_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
case PMBUS_OT_FAULT_LIMIT:
case PMBUS_OT_WARN_LIMIT:
case PMBUS_READ_IIN:
case PMBUS_READ_IOUT:
case PMBUS_READ_TEMPERATURE_1:
case PMBUS_STATUS_WORD:
return i2c_smbus_read_word_data(data->vsa, reg);
default:
return -EOPNOTSUPP;
}
default:
return -EOPNOTSUPP;
}
}
static int max16601_write_byte(struct i2c_client *client, int page, u8 reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct max16601_data *data = to_max16601_data(info);
if (page == 2) {
if (reg == PMBUS_CLEAR_FAULTS)
return i2c_smbus_write_byte(data->vsa, reg);
return -EOPNOTSUPP;
}
return -ENODATA;
}
static int max16601_write_word(struct i2c_client *client, int page, int reg,
u16 value)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct max16601_data *data = to_max16601_data(info);
switch (page) {
case 0: /* VCORE */
return -ENODATA;
case 1: /* VCORE IIN/PIN from sensor element */
default:
return -EOPNOTSUPP;
case 2: /* VSA */
switch (reg) {
case PMBUS_VIRT_RESET_IOUT_HISTORY:
data->iout_avg_pkg = 0xfc00;
return 0;
case PMBUS_IOUT_OC_FAULT_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
case PMBUS_OT_FAULT_LIMIT:
case PMBUS_OT_WARN_LIMIT:
return i2c_smbus_write_word_data(data->vsa, reg, value);
default:
return -EOPNOTSUPP;
}
}
}
static int max16601_identify(struct i2c_client *client,
struct pmbus_driver_info *info)
{
int reg;
reg = i2c_smbus_read_byte_data(client, REG_SETPT_DVID);
if (reg < 0)
return reg;
if (reg & DAC_10MV_MODE)
info->vrm_version[0] = vr13;
else
info->vrm_version[0] = vr12;
reg = i2c_smbus_read_byte_data(client, REG_DEFAULT_NUM_POP);
if (reg < 0)
return reg;
/*
* If REG_DEFAULT_NUM_POP returns 0, we don't know how many phases
* are populated. Stick with the default in that case.
*/
reg &= 0x0f;
if (reg && reg <= MAX16601_NUM_PHASES)
info->phases[0] = reg;
return 0;
}
static struct pmbus_driver_info max16601_info = {
.pages = 3,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = vid,
.format[PSC_CURRENT_IN] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_TEMPERATURE] = linear,
.format[PSC_POWER] = linear,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
PMBUS_HAVE_STATUS_INPUT |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
PMBUS_HAVE_POUT | PMBUS_PAGE_VIRTUAL | PMBUS_PHASE_VIRTUAL,
.func[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_PAGE_VIRTUAL,
.func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_PAGE_VIRTUAL,
.phases[0] = MAX16601_NUM_PHASES,
.pfunc[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
.pfunc[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
.pfunc[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
.pfunc[3] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
.pfunc[4] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
.pfunc[5] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
.pfunc[6] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
.pfunc[7] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
.identify = max16601_identify,
.read_byte_data = max16601_read_byte,
.read_word_data = max16601_read_word,
.write_byte = max16601_write_byte,
.write_word_data = max16601_write_word,
};
static void max16601_remove(void *_data)
{
struct max16601_data *data = _data;
i2c_unregister_device(data->vsa);
}
static int max16601_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
struct max16601_data *data;
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA |
I2C_FUNC_SMBUS_READ_BLOCK_DATA))
return -ENODEV;
ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
if (ret < 0)
return -ENODEV;
/* PMBUS_IC_DEVICE_ID is expected to return "MAX16601y.xx" */
if (ret < 11 || strncmp(buf, "MAX16601", 8)) {
buf[ret] = '\0';
dev_err(dev, "Unsupported chip '%s'\n", buf);
return -ENODEV;
}
ret = i2c_smbus_read_byte_data(client, REG_PHASE_ID);
if (ret < 0)
return ret;
if (!(ret & CORE_RAIL_INDICATOR)) {
dev_err(dev,
"Driver must be instantiated on CORE rail I2C address\n");
return -ENODEV;
}
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->iout_avg_pkg = 0xfc00;
data->vsa = i2c_new_dummy_device(client->adapter, client->addr + 1);
if (IS_ERR(data->vsa)) {
dev_err(dev, "Failed to register VSA client\n");
return PTR_ERR(data->vsa);
}
ret = devm_add_action_or_reset(dev, max16601_remove, data);
if (ret)
return ret;
data->info = max16601_info;
return pmbus_do_probe(client, &data->info);
}
static const struct i2c_device_id max16601_id[] = {
{"max16601", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, max16601_id);
static struct i2c_driver max16601_driver = {
.driver = {
.name = "max16601",
},
.probe_new = max16601_probe,
.id_table = max16601_id,
};
module_i2c_driver(max16601_driver);
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("PMBus driver for Maxim MAX16601");
MODULE_LICENSE("GPL v2");
|