blob: 1c2daf7c24cc04173517c5a0e53c776dc9ff2dc0 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SN65DSI86 DSI to eDP bridge chip
maintainers:
- Sandeep Panda <spanda@codeaurora.org>
description: |
The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
properties:
compatible:
const: ti,sn65dsi86
reg:
const: 0x2d
enable-gpios:
maxItems: 1
description: GPIO specifier for bridge_en pin (active high).
suspend-gpios:
maxItems: 1
description: GPIO specifier for GPIO1 pin on bridge (active low).
no-hpd:
type: boolean
description:
Set if the HPD line on the bridge isn't hooked up to anything or is
otherwise unusable.
vccio-supply:
description: A 1.8V supply that powers the digital IOs.
vpll-supply:
description: A 1.8V supply that powers the DisplayPort PLL.
vcca-supply:
description: A 1.2V supply that powers the analog circuits.
vcc-supply:
description: A 1.2V supply that powers the digital core.
interrupts:
maxItems: 1
clocks:
maxItems: 1
description:
Clock specifier for input reference clock. The reference clock rate must
be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
clock-names:
const: refclk
gpio-controller: true
'#gpio-cells':
const: 2
description:
First cell is pin number, second cell is flags. GPIO pin numbers are
1-based to match the datasheet. See ../../gpio/gpio.txt for more
information.
'#pwm-cells':
const: 1
description: See ../../pwm/pwm.yaml for description of the cell formats.
aux-bus:
$ref: /schemas/display/dp-aux-bus.yaml#
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for MIPI DSI input
port@1:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
Video port for eDP output (panel or connector).
properties:
endpoint:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
unevaluatedProperties: false
properties:
data-lanes:
oneOf:
- minItems: 1
maxItems: 1
uniqueItems: true
items:
enum:
- 0
- 1
description:
If you have 1 logical lane the bridge supports routing
to either port 0 or port 1. Port 0 is suggested.
See ../../media/video-interface.txt for details.
- minItems: 2
maxItems: 2
uniqueItems: true
items:
enum:
- 0
- 1
description:
If you have 2 logical lanes the bridge supports
reordering but only on physical ports 0 and 1.
See ../../media/video-interface.txt for details.
- minItems: 4
maxItems: 4
uniqueItems: true
items:
enum:
- 0
- 1
- 2
- 3
description:
If you have 4 logical lanes the bridge supports
reordering in any way.
See ../../media/video-interface.txt for details.
lane-polarities:
minItems: 1
maxItems: 4
items:
enum:
- 0
- 1
description: See ../../media/video-interface.txt
dependencies:
lane-polarities: [data-lanes]
required:
- port@0
- port@1
required:
- compatible
- reg
- vccio-supply
- vpll-supply
- vcca-supply
- vcc-supply
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
bridge@2d {
compatible = "ti,sn65dsi86";
reg = <0x2d>;
interrupt-parent = <&tlmm>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
vpll-supply = <&src_pp1800_s4a>;
vccio-supply = <&src_pp1800_s4a>;
vcca-supply = <&src_pp1200_l2a>;
vcc-supply = <&src_pp1200_l2a>;
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
clock-names = "refclk";
no-hpd;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
sn65dsi86_out: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};
};
aux-bus {
panel {
compatible = "boe,nv133fhm-n62";
power-supply = <&pp3300_dx_edp>;
backlight = <&backlight>;
hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
port {
panel_in_edp: endpoint {
remote-endpoint = <&sn65dsi86_out>;
};
};
};
};
};
};
- |
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
bridge@2d {
compatible = "ti,sn65dsi86";
reg = <0x2d>;
enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
vccio-supply = <&pm8916_l17>;
vcca-supply = <&pm8916_l6>;
vpll-supply = <&pm8916_l17>;
vcc-supply = <&pm8916_l6>;
clock-names = "refclk";
clocks = <&input_refclk>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
edp_bridge_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
edp_bridge_out: endpoint {
data-lanes = <2 1 3 0>;
lane-polarities = <0 1 0 1>;
remote-endpoint = <&edp_panel_in>;
};
};
};
};
};
|