| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix afs_invalidatepage() to adjust the dirty region recorded in
page->private when truncating a page. If the dirty region is entirely
removed, then the private data is cleared and the page dirty state is
cleared.
Without this, if the page is truncated and then expanded again by truncate,
zeros from the expanded, but no-longer dirty region may get written back to
the server if the page gets laundered due to a conflicting 3rd-party write.
It mustn't, however, shorten the dirty region of the page if that page is
still mmapped and has been marked dirty by afs_page_mkwrite(), so a flag is
stored in page->private to record this.
Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The afs filesystem uses page->private to store the dirty range within a
page such that in the event of a conflicting 3rd-party write to the server,
we write back just the bits that got changed locally.
However, there are a couple of problems with this:
(1) I need a bit to note if the page might be mapped so that partial
invalidation doesn't shrink the range.
(2) There aren't necessarily sufficient bits to store the entire range of
data altered (say it's a 32-bit system with 64KiB pages or transparent
huge pages are in use).
So wrap the accesses in inline functions so that future commits can change
how this works.
Also move them out of the tracing header into the in-directory header.
There's not really any need for them to be in the tracing header.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The siginificant new ext4 feature this time around is Harshad's new
fast_commit mode.
In addition, thanks to Mauricio for fixing a race where mmap'ed pages
that are being changed in parallel with a data=journal transaction
commit could result in bad checksums in the failure that could cause
journal replays to fail.
Also notable is Ritesh's buffered write optimization which can result
in significant improvements on parallel write workloads. (The kernel
test robot reported a 330.6% improvement on fio.write_iops on a 96
core system using DAX)
Besides that, we have the usual miscellaneous cleanups and bug fixes"
Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: fix invalid inode checksum
ext4: add fast commit stats in procfs
ext4: add a mount opt to forcefully turn fast commits on
ext4: fast commit recovery path
jbd2: fast commit recovery path
ext4: main fast-commit commit path
jbd2: add fast commit machinery
ext4 / jbd2: add fast commit initialization
ext4: add fast_commit feature and handling for extended mount options
doc: update ext4 and journalling docs to include fast commit feature
ext4: Detect already used quota file early
jbd2: avoid transaction reuse after reformatting
ext4: use the normal helper to get the actual inode
ext4: fix bs < ps issue reported with dioread_nolock mount opt
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
ext4: data=journal: fixes for ext4_page_mkwrite()
jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
ext4: use ext4_sb_bread() instead of sb_bread()
...
|
|
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Pull NFS client updates from Anna Schumaker:
"Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
Other bugfixes and cleanups:
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing 'local_lock=posix' mount option"
* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
NFSv4: Fix up RCU annotations for struct nfs_netns_client
NFS: Only reference user namespace from nfs4idmap struct instead of cred
nfs: add missing "posix" local_lock constant table definition
NFSv4: Use the net namespace uniquifier if it is set
NFSv4: Clean up initialisation of uniquified client id strings
NFS: Decode a full READ_PLUS reply
SUNRPC: Add an xdr_align_data() function
NFS: Add READ_PLUS hole segment decoding
SUNRPC: Add the ability to expand holes in data pages
SUNRPC: Split out _shift_data_right_tail()
SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
NFS: Add READ_PLUS data segment support
NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
SUNRPC: Implement a xdr_page_pos() function
SUNRPC: Split out a function for setting current page
NFS: fix nfs_path in case of a rename retry
fs: nfs: return per memcg count for xattr shrinkers
NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
nfs: remove incorrect fallthrough label
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
|
|
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"A collection of fixes to fix afs_cell struct refcounting, thereby
fixing a slew of related syzbot bugs:
- Fix the cell tree in the netns to use an rwsem rather than RCU.
There seem to be some problems deriving from the use of RCU and a
seqlock to walk the rbtree, but it's not entirely clear what since
there are several different failures being seen.
Changing things to use an rwsem instead makes it more robust. The
extra performance derived from using RCU isn't necessary in this
case since the only time we're looking up a cell is during mount or
when cells are being manually added.
- Fix the refcounting by splitting the usage counter into a memory
refcount and an active users counter. The usage counter was doing
double duty, keeping track of whether a cell is still in use and
keeping track of when it needs to be destroyed - but this makes the
clean up tricky. Separating these out simplifies the logic.
- Fix purging a cell that has an alias. A cell alias pins the cell
it's an alias of, but the alias is always later in the list. Trying
to purge in a single pass causes rmmod to hang in such a case.
- Fix cell removal. If a cell's manager is requeued whilst it's
removing itself, the manager will run again and re-remove itself,
causing problems in various places. Follow Hillf Danton's
suggestion to insert a more terminal state that causes the manager
to do nothing post-removal.
In additional to the above, two other changes:
- Add a tracepoint for the cell refcount and active users count. This
helped with debugging the above and may be useful again in future.
- Downgrade an assertion to a print when a still-active server is
seen during purging. This was happening as a consequence of
incomplete cell removal before the servers were cleaned up"
* tag 'afs-fixes-20201016' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Don't assert on unpurgeable server records
afs: Add tracing for cell refcount and active user count
afs: Fix cell removal
afs: Fix cell purging with aliases
afs: Fix cell refcounting by splitting the usage counter
afs: Fix rapid cell addition/removal by not using RCU on cells tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added new features such as zone capacity for ZNS
and a new GC policy, ATGC, along with in-memory segment management. In
addition, we could improve the decompression speed significantly by
changing virtual mapping method. Even though we've fixed lots of small
bugs in compression support, I feel that it becomes more stable so
that I could give it a try in production.
Enhancements:
- suport zone capacity in NVMe Zoned Namespace devices
- introduce in-memory current segment management
- add standart casefolding support
- support age threshold based garbage collection
- improve decompression speed by changing virtual mapping method
Bug fixes:
- fix condition checks in some ioctl() such as compression, move_range, etc
- fix 32/64bits support in data structures
- fix memory allocation in zstd decompress
- add some boundary checks to avoid kernel panic on corrupted image
- fix disallowing compression for non-empty file
- fix slab leakage of compressed block writes
In addition, it includes code refactoring for better readability and
minor bug fixes for compression and zoned device support"
* tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: code cleanup by removing unnecessary check
f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
f2fs: fix writecount false positive in releasing compress blocks
f2fs: introduce check_swap_activate_fast()
f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case
f2fs: handle errors of f2fs_get_meta_page_nofail
f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode
f2fs: reject CASEFOLD inode flag without casefold feature
f2fs: fix memory alignment to support 32bit
f2fs: fix slab leak of rpages pointer
f2fs: compress: fix to disallow enabling compress on non-empty file
f2fs: compress: introduce cic/dic slab cache
f2fs: compress: introduce page array slab cache
f2fs: fix to do sanity check on segment/section count
f2fs: fix to check segment boundary during SIT page readahead
f2fs: fix uninit-value in f2fs_lookup
f2fs: remove unneeded parameter in find_in_block()
f2fs: fix wrong total_sections check and fsmeta check
f2fs: remove duplicated code in sanity_check_area_boundary
f2fs: remove unused check on version_bitmap
...
|
|
Don't give an assertion failure on unpurgeable afs_server records - which
kills the thread - but rather emit a trace line when we are purging a
record (which only happens during network namespace removal or rmmod) and
print a notice of the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add a tracepoint to log the cell refcount and active user count and pass in
a reason code through various functions that manipulate these counters.
Additionally, a helper function, afs_see_cell(), is provided to log
interesting places that deal with a cell without actually doing any
accounting directly.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
|
|
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A decent number of SELinux patches for v5.10, twenty two in total. The
highlights are listed below, but all of the patches pass our test
suite and merge cleanly.
- A number of changes to how the SELinux policy is loaded and managed
inside the kernel with the goal of improving the atomicity of a
SELinux policy load operation.
These changes account for the bulk of the diffstat as well as the
patch count. A special thanks to everyone who contributed patches
and fixes for this work.
- Convert the SELinux policy read-write lock to RCU.
- A tracepoint was added for audited SELinux access control events;
this should help provide a more unified backtrace across kernel and
userspace.
- Allow the removal of security.selinux xattrs when a SELinux policy
is not loaded.
- Enable policy capabilities in SELinux policies created with the
scripts/selinux/mdp tool.
- Provide some "no sooner than" dates for the SELinux checkreqprot
sysfs deprecation"
* tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits)
selinux: provide a "no sooner than" date for the checkreqprot removal
selinux: Add helper functions to get and set checkreqprot
selinux: access policycaps with READ_ONCE/WRITE_ONCE
selinux: simplify away security_policydb_len()
selinux: move policy mutex to selinux_state, use in lockdep checks
selinux: fix error handling bugs in security_load_policy()
selinux: convert policy read-write lock to RCU
selinux: delete repeated words in comments
selinux: add basic filtering for audit trace events
selinux: add tracepoint on audited events
selinux: Create new booleans and class dirs out of tree
selinux: Standardize string literal usage for selinuxfs directory names
selinux: Refactor selinuxfs directory populating functions
selinux: Create function for selinuxfs directory cleanup
selinux: permit removing security.selinux xattr before policy load
selinux: fix memdup.cocci warnings
selinux: avoid dereferencing the policy prior to initialization
selinux: fix allocation failure check on newpolicy->sidtab
selinux: refactor changing booleans
selinux: move policy commit after updating selinuxfs
...
|
|
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
|
|
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core updates with a few user visible bits and fixes.
Hilights:
- fsync performance improvements
- less contention of log mutex (throughput +4%, latency -14%,
dbench with 32 clients)
- skip unnecessary commits for link and rename (throughput +6%,
latency -30%, rename latency -75%, dbench with 16 clients)
- make fast fsync wait only for writeback (throughput +10..40%,
runtime -1..-20%, dbench with 1 to 64 clients on various
file/block sizes)
- direct io is now implemented using the iomap infrastructure, that's
the main part, we still have a workaround that requires an iomap
API update, coming in 5.10
- new sysfs exports:
- information about the exclusive filesystem operation status
(balance, device add/remove/replace, ...)
- supported send stream version
Core:
- use ticket space reservations for data, fair policy using the same
infrastructure as metadata
- preparatory work to switch locking from our custom tree locks to
standard rwsem, now the locking context is propagated to all
callers, actual switch is expected to happen in the next dev cycle
- seed device structures are now using list API
- extent tracepoints print proper tree id
- unified range checks for extent buffer helpers
- send: avoid using temporary buffer for copying data
- remove unnecessary RCU protection from space infos
- remove unused readpage callback for metadata, enabling several
cleanups
- replace indirect function calls for end io hooks and remove
extent_io_ops completely
Fixes:
- more lockdep warning fixes
- fix qgroup reservation for delayed inode and an occasional
reservation leak for preallocated files
- fix device replace of a seed device
- fix metadata reservation for fallocate that leads to transaction
aborts
- reschedule if necessary when logging directory items or when
cloning lots of extents
- tree-checker: fix false alert caused by legacy btrfs root item
- send: fix rename/link conflicts for orphanized inodes
- properly initialize device stats for seed devices
- skip devices without magic signature when mounting
Other:
- error handling improvements, BUG_ONs replaced by proper handling,
fuzz fixes
- various function parameter cleanups
- various W=1 cleanups
- error/info messages improved
Mishaps:
- commit 62cf5391209a ("btrfs: move btrfs_rm_dev_replace_free_srcdev
outside of all locks") is a rebase leftover after the patch got
merged to 5.9-rc8 as a466c85edc6f ("btrfs: move
btrfs_rm_dev_replace_free_srcdev outside of all locks"), the
remaining part is trivial and the patch is in the middle of the
series so I'm keeping it there instead of rebasing"
* tag 'for-5.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (161 commits)
btrfs: rename BTRFS_INODE_ORDERED_DATA_CLOSE flag
btrfs: annotate device name rcu_string with __rcu
btrfs: skip devices without magic signature when mounting
btrfs: cleanup cow block on error
btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
fs: remove no longer used dio_end_io()
btrfs: return error if we're unable to read device stats
btrfs: init device stats for seed devices
btrfs: remove struct extent_io_ops
btrfs: call submit_bio_hook directly for metadata pages
btrfs: stop calling submit_bio_hook for data inodes
btrfs: don't opencode is_data_inode in end_bio_extent_readpage
btrfs: call submit_bio_hook directly in submit_one_bio
btrfs: remove extent_io_ops::readpage_end_io_hook
btrfs: replace readpage_end_io_hook with direct calls
btrfs: send, recompute reference path after orphanization of a directory
btrfs: send, orphanize first all conflicting inodes when processing references
btrfs: tree-checker: fix false alert caused by legacy btrfs root item
btrfs: use unaligned helpers for stack and header set/get helpers
btrfs: free-space-cache: use unaligned helpers to access data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking fix from Jeff Layton:
"Just a single patch to fix up some tracepoint output"
* tag 'locks-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: Remove extra "0x" in tracepoint format specifier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt cleanup from Ingo Molnar:
"Clean up the paravirt code after the removal of 32-bit Xen PV support"
* tag 'x86-paravirt-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Avoid needless paravirt step clearing page table entries
x86/paravirt: Remove set_pte_at() pv-op
x86/entry/32: Simplify CONFIG_XEN_PV build dependency
x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT
x86/paravirt: Clean up paravirt macros
x86/paravirt: Remove 32-bit support from CONFIG_PARAVIRT_XXL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- reorganize & clean up the SD* flags definitions and add a bunch of
sanity checks. These new checks caught quite a few bugs or at least
inconsistencies, resulting in another set of patches.
- rseq updates, add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
- add a new tracepoint to improve CPU capacity tracking
- improve overloaded SMP system load-balancing behavior
- tweak SMT balancing
- energy-aware scheduling updates
- NUMA balancing improvements
- deadline scheduler fixes and improvements
- CPU isolation fixes
- misc cleanups, simplifications and smaller optimizations
* tag 'sched-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
sched/deadline: Unthrottle PI boosted threads while enqueuing
sched/debug: Add new tracepoint to track cpu_capacity
sched/fair: Tweak pick_next_entity()
rseq/selftests: Test MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
rseq/selftests,x86_64: Add rseq_offset_deref_addv()
rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
sched/fair: Use dst group while checking imbalance for NUMA balancer
sched/fair: Reduce busy load balance interval
sched/fair: Minimize concurrent LBs between domain level
sched/fair: Reduce minimal imbalance threshold
sched/fair: Relax constraint on task's load during load balance
sched/fair: Remove the force parameter of update_tg_load_avg()
sched/fair: Fix wrong cpu selecting from isolated domain
sched: Remove unused inline function uclamp_bucket_base_value()
sched/rt: Disable RT_RUNTIME_SHARE by default
sched/deadline: Fix stale throttling on de-/boosted tasks
sched/numa: Use runnable_avg to classify node
sched/topology: Move sd_flag_debug out of #ifdef CONFIG_SYSCTL
MAINTAINERS: Add myself as SCHED_DEADLINE reviewer
sched/topology: Move SD_DEGENERATE_GROUPS_MASK out of linux/sched/topology.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Btree inode is special compared to all other inode extent io_trees,
although it has a btrfs inode, it doesn't have the track_uptodate bit at
all.
This means a lot of things like extent locking doesn't even need to be
applied to btree io tree.
Since it's so special, adds a new owner value for it to make debuging a
little easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The current trace event always output result like this:
find_free_extent: root=2(EXTENT_TREE) len=16384 empty_size=0 flags=4(METADATA)
find_free_extent: root=2(EXTENT_TREE) len=16384 empty_size=0 flags=4(METADATA)
find_free_extent: root=2(EXTENT_TREE) len=8192 empty_size=0 flags=1(DATA)
find_free_extent: root=2(EXTENT_TREE) len=8192 empty_size=0 flags=1(DATA)
find_free_extent: root=2(EXTENT_TREE) len=4096 empty_size=0 flags=1(DATA)
find_free_extent: root=2(EXTENT_TREE) len=4096 empty_size=0 flags=1(DATA)
T's saying we're allocating data extent for EXTENT tree, which is not
even possible.
It's because we always use EXTENT tree as the owner for
trace_find_free_extent() without using the @root from
btrfs_reserve_extent().
This patch will change the parameter to use proper @root for
trace_find_free_extent():
Now it looks much better:
find_free_extent: root=5(FS_TREE) len=16384 empty_size=0 flags=36(METADATA|DUP)
find_free_extent: root=5(FS_TREE) len=8192 empty_size=0 flags=1(DATA)
find_free_extent: root=5(FS_TREE) len=16384 empty_size=0 flags=1(DATA)
find_free_extent: root=5(FS_TREE) len=4096 empty_size=0 flags=1(DATA)
find_free_extent: root=5(FS_TREE) len=8192 empty_size=0 flags=1(DATA)
find_free_extent: root=5(FS_TREE) len=16384 empty_size=0 flags=36(METADATA|DUP)
find_free_extent: root=7(CSUM_TREE) len=16384 empty_size=0 flags=36(METADATA|DUP)
find_free_extent: root=2(EXTENT_TREE) len=16384 empty_size=0 flags=36(METADATA|DUP)
find_free_extent: root=1(ROOT_TREE) len=16384 empty_size=0 flags=36(METADATA|DUP)
Reported-by: Hans van Kranenburg <hans@knorrie.org>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Linux 5.9-rc5
|
|
Newly added catpt solution found in sound/soc/intel/catpt is a direct
replacement to sound/soc/intel/haswell. It covers all features supported
by it and more - by aligning to recommended flows and requirement list
based on Windows driver equivalent. No harm is done to userspace as
catpt - similarly to haswell - loads no extenal topology files while
sharing the exact same ADSP firmware binary.
Given the above, existing haswell code is redundant so remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rq->cpu_capacity is a key element in several scheduler parts, such as EAS
task placement and load balancing. Tracking this value enables testing
and/or debugging by a toolkit.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1598605249-72651-1-git-send-email-vincent.donnefort@arm.com
|
|
trace-cmd report doesn't show events from target subsystem because
scsi_command_size() leaks through event format string:
[target:target_sequencer_start] function scsi_command_size not defined
[target:target_cmd_complete] function scsi_command_size not defined
Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't
help because an expression is used inside TP_printk(). trace-cmd event
parser doesn't understand minus sign inside [ ]:
Error: expected ']' but read '-'
Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated
field for CONTROL byte.
Link: https://lore.kernel.org/r/20200929125957.83069-1-r.bolshakov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch adds a separated set_uuid[16] in struct cache_set, to store
the uuid of the cache set. This is the preparation to remove the
embedded struct cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a tracepoint for trap reports so that drop monitor could register
its probe on it. Use trace_devlink_trap_report_enabled() to avoid
wasting cycles setting the trap metadata if the tracepoint is not
enabled.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MSRs are weird. Some of them are normal control registers, such as EFER.
Some however are registers that really are model specific, not very
interesting to virtualization workloads, and not performance critical.
Others again are really just windows into package configuration.
Out of these MSRs, only the first category is necessary to implement in
kernel space. Rarely accessed MSRs, MSRs that should be fine tunes against
certain CPU models and MSRs that contain information on the package level
are much better suited for user space to process. However, over time we have
accumulated a lot of MSRs that are not the first category, but still handled
by in-kernel KVM code.
This patch adds a generic interface to handle WRMSR and RDMSR from user
space. With this, any future MSR that is part of the latter categories can
be handled in user space.
Furthermore, it allows us to replace the existing "ignore_msrs" logic with
something that applies per-VM rather than on the full system. That way you
can run productive VMs in parallel to experimental ones where you don't care
about proper MSR handling.
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200925143422.21718-3-graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
|
|
Remove redundant call sites or call sites that are already covered
by tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Remove several redundant dprintk call sites, and replace a couple of
potentially useful ones with tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In many cases, tracepoints already report these errors. In others,
the dprintks were mainly useful when this code was less mature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In many cases, tracepoints already report these errors. In others,
the dprintks were mainly useful when this code was less mature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Time to remove dprintk call sites in here.
Regarding the rpc_bind_status tracepoint: It's friendlier to
administrators if they don't have to look up the error code to
figure out what went wrong. Replace trace_rpc_bind_status with a
set of tracepoints that report more specifically what the problem
was, and what RPC program/version was being queried.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: Replace dprintk call sites.
Note that rpc_call_rpcerror() already has a trace point, so perhaps
adding trace_rpc_refresh_status() isn't necessary. However, it does
report a particular category of error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
For a long while we've wanted a tracepoint that fires when a major
timeout is reported in the system log. Such a tracepoint can be
attached to other actions that can take place when a timeout is
detected (eg, server or connection health assessment).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This trace event can be used to audit transport connections from the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
"no socket space" is an exceptional and infrequent condition
that troubleshooters want to know about.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Generate a trace event when an RPC request is queued without being
sent immediately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Replace a dprintk() with a tracepoint. The tracepoint marks the
point where an RPC request is assigned an XID.
Additional clean up: Remove trace_xprt_enq_xmit, which reports much
the same thing. That tracepoint was added for debugging commit
918f3c1fe83c ("SUNRPC: Improve latency for interactive tasks").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
These instruments don't appear to add any substantial value.
We already have this at the termination of each RPC:
iozone-2617 [002] 975.713126: rpc_stats_latency: task:418@5 xid=0x260eab5d nfsv3 LOOKUP backlog=15 rtt=32 execute=58
iozone-2617 [002] 975.713127: xprt_release_cong: task:418@5 snd_task:4294967295 cong=256 cwnd=16384
iozone-2617 [002] 975.713127: xprt_put_cong: task:418@5 snd_task:4294967295 cong=0 cwnd=16384
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
