summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
AgeCommit message (Expand)AuthorFilesLines
2020-08-27rt2x00: Use fallthrough pseudo-keywordGustavo A. R. Silva1-21/+21
2020-05-29rt2800: enable MFP support unconditionallyRui Salvaterra1-3/+1
2019-12-18rt2x00: use RESET state bit to prevent IV changes on restartStanislaw Gruszka1-12/+9
2019-11-06rt2800: remove errornous duplicate conditionDaniel Golle1-4/+1
2019-10-04mac80211: simplify TX aggregation startJohannes Berg1-2/+2
2019-09-03Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"Stanislaw Gruszka1-12/+6
2019-09-03rt2x00: clear up IV's on key removalStanislaw Gruszka1-7/+12
2019-08-20rt2x00: clear IV's on start to fix AP mode regressionStanislaw Gruszka1-0/+9
2019-06-25rt2800: do not enable watchdog by defaultStanislaw Gruszka1-2/+10
2019-06-25rt2x00: add restart hwStanislaw Gruszka1-0/+4
2019-06-25rt2800: do not nullify initialization vector dataStanislaw Gruszka1-5/+4
2019-06-25rt2800: add pre_reset_hw callbackStanislaw Gruszka1-0/+19
2019-06-25rt2800: initial watchdog implementationStanislaw Gruszka1-0/+56
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-12/+1
2019-04-25rt2x00: add RT3883 supportGabor Juhos1-17/+581
2019-04-25rt2x00: remove last_nostatus_checkStanislaw Gruszka1-9/+0
2019-04-25rt2800: move txstatus pending routineStanislaw Gruszka1-0/+17
2019-04-25rt2800: partially restore old mmio txstatus behaviourStanislaw Gruszka1-2/+2
2019-02-19rt2800: comment and simplify AGC init for RT6352Stanislaw Gruszka1-3/+6
2019-02-19rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620Stanislaw Gruszka1-3/+4
2019-02-19rt2800: enable TX_PIN_CFG_LNA_PE_ bits per bandStanislaw Gruszka1-6/+12
2019-02-19rt2x00: remove confusing AGC registerTomislav Požega1-5/+1
2019-02-19rt2x00: remove unneeded checkTomislav Požega1-53/+50
2019-02-01rt2x00: reduce tx power to nominal level on RT6352Tomislav Požega1-1/+1
2018-11-06rt2x00: rt2800lib: mark expected switch fall-throughsGustavo A. R. Silva1-0/+4
2018-10-01rt2800: flush and txstatus rework for rt2800mmioStanislaw Gruszka1-8/+6
2018-10-01rt2x00: use different txstatus timeouts when flushingStanislaw Gruszka1-10/+21
2018-10-01rt2x00: do not check for txstatus timeout every time on taskletStanislaw Gruszka1-0/+7
2018-10-01rt2800: move usb specific txdone/txstatus routines to rt2800libStanislaw Gruszka1-0/+138
2018-05-04rt2x00: call sta_add/remove directly in rt2800Stanislaw Gruszka1-4/+7
2018-04-25rt2x00: rt2800: add antenna diversity for RT5370GXose Vazquez Perez1-3/+6
2018-01-08rt2x00: Fix a typo in printkMasanari Iida1-1/+1
2017-08-30rt2800: fix TX_PIN_CFG setting for non MT7620 chipsStanislaw Gruszka1-1/+4
2017-07-13rt2x00: make const array glrt_table staticColin Ian King1-1/+1
2017-05-24rt2x00: convert rt2x00_desc_read return typeArnd Bergmann1-6/+6
2017-05-24rt2x00: convert rt2800_eeprom_read return typeArnd Bergmann1-97/+97
2017-05-24rt2x00: convert rt2x00_eeprom_read return typeArnd Bergmann1-3/+3
2017-05-24rt2x00: convert rt2*_bbp_read return typeArnd Bergmann1-62/+54
2017-05-24rt2x00: convert rt2800_register_read return typeArnd Bergmann1-146/+145
2017-05-24rt2x00: convert rt2x00_rf_read return typeArnd Bergmann1-1/+1
2017-05-24rt2x00: convert rt2800_rfcsr_read return typeArnd Bergmann1-164/+158
2017-05-24rt2x00: change function pointers for register accessorsArnd Bergmann1-5/+23
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg1-1/+1
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg1-2/+2
2017-04-20rt2800: fix mt7620 E2 channel registersTomislav Požega1-2/+4
2017-04-20rt2800: fix mt7620 vco calibration registersTomislav Požega1-3/+3
2017-04-20rt2800: do VCO calibration after programming ALCDaniel Golle1-0/+2
2017-04-20rt2800: fix LNA gain assignment for MT7620Daniel Golle1-2/+16
2017-04-13rt2x00: reverse external PA capability flag logicDaniel Golle1-20/+20
2017-03-22rt2x00: add support for MT7620Roman Yeryomin1-26/+1395