summaryrefslogtreecommitdiff
path: root/arch/powerpc/include/asm/reg.h
AgeCommit message (Collapse)AuthorFilesLines
2020-10-08powerpc/time: Make mftb() common to PPC32 and PPC64Christophe Leroy1-10/+4
No need to have two versions that are identical. CONFIG_PPC_CELL is only selected by PPC64 targets. CONFIG_E500 is the only PPC64 target selecting CONFIG_FSL_BOOK3E. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6bf23ec744aab4ba63506a011f6a145ea35d620d.1601556145.git.christophe.leroy@csgroup.eu
2020-10-08powerpc/time: Rename mftbl() to mftb()Christophe Leroy1-3/+2
On PPC64, we have mftb(). On PPC32, we have mftbl() and an #define mftb() mftbl(). mftb() and mftbl() are equivalent, their purpose is to read the content of SPRN_TRBL, as returned by 'mftb' simplified instruction. binutils seems to define 'mftbl' instruction as an equivalent of 'mftb'. However in both 32 bits and 64 bits documentation, only 'mftb' is defined, and when performing a disassembly with objdump, the displayed instruction is 'mftb' No need to have two ways to do the same thing with different names, rename mftbl() to have only mftb(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/94dc68d3d9ef9eb549796d4b938b6ba0305a049b.1601556145.git.christophe.leroy@csgroup.eu
2020-10-08powerpc/time: Remove ifdef in get_dec() and set_dec()Christophe Leroy1-0/+2
Move SPRN_PIT definition in reg.h. This allows to remove ifdef in get_dec() and set_dec() and makes them more readable. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3c9a6eb0fc040868ac59be66f338d08fd017668d.1601549945.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/powernv/idle: add a basic stop 0-3 driver for POWER10Nicholas Piggin1-0/+1
This driver does not restore stop > 3 state, so it limits itself to states which do not lose full state or TB. The POWER10 SPRs are sufficiently different from P9 that it seems easier to split out the P10 code. The POWER10 deep sleep code (e.g., the BHRB restore) has been taken out, but it can be re-added when stop > 3 support is added. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Pratik Rajesh Sampat<psampat@linux.ibm.com> Tested-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Reviewed-by: Pratik Rajesh Sampat<psampat@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819094700.493399-1-npiggin@gmail.com
2020-09-15powerpc/tau: Use appropriate temperature sample intervalFinn Thain1-1/+1
According to the MPC750 Users Manual, the SITV value in Thermal Management Register 3 is 13 bits long. The present code calculates the SITV value as 60 * 500 cycles. This would overflow to give 10 us on a 500 MHz CPU rather than the intended 60 us. (But according to the Microprocessor Datasheet, there is also a factor of 266 that has to be applied to this value on certain parts i.e. speed sort above 266 MHz.) Always use the maximum cycle count, as recommended by the Datasheet. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
2020-08-09Merge tag 'kvm-ppc-next-5.9-1' of ↵Paolo Bonzini1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6 PPC KVM update for 5.9 - Improvements and bug-fixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support
2020-07-29powerpc/perf: Fix MMCRA_BHRB_DISABLE define for binutils < 2.28Athira Rajeev1-1/+2
Commit 9908c826d5ed ("powerpc/perf: Add Power10 PMU feature to DT CPU features") defines MMCRA_BHRB_DISABLE as `0x2000000000UL`. Binutils version less than 2.28 doesn't support UL suffix. arch/powerpc/kernel/cpu_setup_power.S: Assembler messages: arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: operand out of range (0x0000002000000000 is not between 0xffffffffffff8000 and 0x000000000000ffff) Fix this by wrapping it with the `_UL` macro. Fixes: 9908c826d5ed ("Add Power10 PMU feature to DT CPU features") Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1595996214-5833-1-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-27powerpc/reg.h: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "a". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200726003809.20454-8-rdunlap@infradead.org
2020-07-22powerpc/perf: Add Power10 PMU feature to DT CPU featuresMadhavan Srinivasan1-0/+1
Add Power10 feature function to DT CPU features, along with a Power10 specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and cpu_features. This will enable performance monitoring unit (PMU) for Power10 in CPU features with "performance-monitor-power10". For Power ISA v3.1, BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB feature at boot for Power10. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> [mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-22powerpc/perf: Add support for ISA3.1 PMU SPRsMadhavan Srinivasan1-0/+6
PowerISA v3.1 includes new performance monitoring unit(PMU) special purpose registers (SPRs). They are Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register 2 (SIER2) Sampled Instruction Event Register 3 (SIER3) MMCR3 is added for further sampling related configuration control. SIER2/SIER3 are added to provide additional information about the sampled instruction. Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of these new SPRs, updates the struct thread_struct to include these new SPRs, include MMCR3 in struct mmcr_regs. This is needed to support programming of MMCR3 SPR during event_enable/disable. Patch also adds the sysfs support for the MMCR3 SPR along with SPRN_ macros for these new pmu SPRs. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> [mpe: Rename to PPMU_ARCH_31 as noted by jpn] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-21KVM: PPC: Book3S HV: Increase KVMPPC_NR_LPIDS on POWER8 and POWER9Cédric Le Goater1-1/+2
POWER8 and POWER9 have 12-bit LPIDs. Change LPID_RSVD to support up to (4096 - 2) guests on these processors. POWER7 is kept the same with a limitation of (1024 - 2), but it might be time to drop KVM support for POWER7. Tested with 2048 guests * 4 vCPUs on a witherspoon system with 512G RAM and a bit of swap. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-07-21KVM: PPC: Book3SHV: Enable support for ISA v3.1 guestsAlistair Popple1-0/+1
Adds support for emulating ISAv3.1 guests by adding the appropriate PCR and FSCR bits. Signed-off-by: Alistair Popple <alistair@popple.id.au> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-06-02powerpc/dt_cpu_ftrs: Add MMA featureAlistair Popple1-1/+2
Matrix multiple assist (MMA) is a new feature added to ISAv3.1 and POWER10. Support on powernv can be selected via a firmware CPU device tree feature which enables it via a PCR bit. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200521014341.29095-7-alistair@popple.id.au
2020-06-02powerpc: Add support for ISA v3.1Alistair Popple1-1/+2
Newer ISA versions are enabled by clearing all bits in the PCR associated with previous versions of the ISA. Enable ISA v3.1 support by updating the PCR mask to include ISA v3.0. This ensures all PCR bits corresponding to earlier architecture versions get cleared thereby enabling ISA v3.1 if supported by the hardware. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200521014341.29095-3-alistair@popple.id.au
2020-05-19powerpc/watchpoint: Add SPRN macros for second DAWRRavi Bangoria1-0/+2
Power10 is introducing second DAWR. Add SPRN_ macros for the same. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Michael Neuling <mikey@neuling.org> Link: https://lore.kernel.org/r/20200514111741.97993-3-ravi.bangoria@linux.ibm.com
2020-05-19powerpc/watchpoint: Rename current DAWR macrosRavi Bangoria1-2/+2
Power10 is introducing second DAWR. Use real register names from ISA for current macros: s/SPRN_DAWR/SPRN_DAWR0/ s/SPRN_DAWRX/SPRN_DAWRX0/ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Michael Neuling <mikey@neuling.org> Link: https://lore.kernel.org/r/20200514111741.97993-2-ravi.bangoria@linux.ibm.com
2020-05-19powerpc: Define new SRR1 bits for a ISA v3.1Jordan Niethe1-1/+3
Add the BOUNDARY SRR1 bit definition for when the cause of an alignment exception is a prefixed instruction that crosses a 64-byte boundary. Add the PREFIXED SRR1 bit definition for exceptions caused by prefixed instructions. Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it being used to indicate that an ISI was due to the access being no-exec or guarded. ISA v3.1 adds another purpose. It is also set if there is an access in a cache-inhibited location for prefixed instruction. Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Alistair Popple <alistair@popple.id.au> Link: https://lore.kernel.org/r/20200506034050.24806-23-jniethe5@gmail.com
2020-05-19powerpc: Enable Prefixed InstructionsAlistair Popple1-0/+3
Prefix instructions have their own FSCR bit which needs to enabled via a CPU feature. The kernel will save the FSCR for problem state but it needs to be enabled initially. If prefixed instructions are made unavailable by the [H]FSCR, attempting to use them will cause a facility unavailable exception. Add "PREFIX" to the facility_strings[]. Currently there are no prefixed instructions that are actually emulated by emulate_instruction() within facility_unavailable_exception(). However, when caused by a prefixed instructions the SRR1 PREFIXED bit is set. Prepare for dealing with emulated prefixed instructions by checking for this bit. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200506034050.24806-22-jniethe5@gmail.com
2020-03-04powerpc: Add current_stack_pointer as a register globalChristophe Leroy1-0/+2
current_stack_frame() doesn't return the stack pointer, but the caller's stack frame. See commit bfe9a2cfe91a ("powerpc: Reimplement __get_SP() as a function not a define") and commit acf620ecf56c ("powerpc: Rename __get_SP() to current_stack_pointer()") for details. In some cases this is overkill or incorrect, as it doesn't return the current value of r1. So add a current_stack_pointer register global to get the value of r1 directly. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Split out of other patch, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200220115141.2707-2-mpe@ellerman.id.au
2020-03-04powerpc: Rename current_stack_pointer() to current_stack_frame()Michael Ellerman1-1/+1
current_stack_pointer(), which was called __get_SP(), used to just return the value in r1. But that caused problems in some cases, so it was turned into a function in commit bfe9a2cfe91a ("powerpc: Reimplement __get_SP() as a function not a define"). Because it's a function in a separate compilation unit to all its callers, it has the effect of causing a stack frame to be created, and then returns the address of that frame. This is good in some cases like those described in the above commit, but in other cases it's overkill, we just need to know what stack page we're on. On some other arches current_stack_pointer is just a register global giving the stack pointer, and we'd like to do that too. So rename our current_stack_pointer() to current_stack_frame() to make that possible. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200220115141.2707-1-mpe@ellerman.id.au
2019-11-30Merge tag 'powerpc-5.5-1' of ↵Linus Torvalds1-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Infrastructure for secure boot on some bare metal Power9 machines. The firmware support is still in development, so the code here won't actually activate secure boot on any existing systems. - A change to xmon (our crash handler / pseudo-debugger) to restrict it to read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop into xmon and modify kernel data, such as the lockdown state. - Support for KASLR on 32-bit BookE machines (Freescale / NXP). - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work with memory ranges >4GB. - Some reworks of the pseries CMM (Cooperative Memory Management) driver to make it behave more like other balloon drivers and enable some cleanups of generic mm code. - A series of fixes to our hardware breakpoint support to properly handle unaligned watchpoint addresses. Plus a bunch of other smaller improvements, fixes and cleanups. Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing" * tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits) powerpc/fixmap: fix crash with HIGHMEM x86/efi: remove unused variables powerpc: Define arch_is_kernel_initmem_freed() for lockdep powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp powerpc: Avoid clang warnings around setjmp and longjmp powerpc: Don't add -mabi= flags when building with Clang powerpc: Fix Kconfig indentation powerpc/fixmap: don't clear fixmap area in paging_init() selftests/powerpc: spectre_v2 test must be built 64-bit powerpc/powernv: Disable native PCIe port management powerpc/kexec: Move kexec files into a dedicated subdir. powerpc/32: Split kexec low level code out of misc_32.S powerpc/sysdev: drop simple gpio powerpc/83xx: map IMMR with a BAT. powerpc/32s: automatically allocate BAT in setbat() powerpc/ioremap: warn on early use of ioremap() powerpc: Add support for GENERIC_EARLY_IOREMAP powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt() powerpc/8xx: use the fixmapped IMMR in cpm_reset() powerpc/8xx: add __init to cpm1 init functions ...
2019-11-18powerpc: cleanup hw_irq.hChristophe Leroy1-0/+8
SET_MSR_EE() is just use in this file and doesn't provide any added value compared to mtmsr(). Drop it. Add a wrtee() inline function to use wrtee/wrteei insn. Replace #ifdefs by IS_ENABLED() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a28a20514d5f6df9629c1a117b667e48c4272736.1567068137.git.christophe.leroy@c-s.fr
2019-11-18powerpc: permanently include 8xx registers in reg.hChristophe Leroy1-2/+0
Most 8xx registers have specific names, so just include reg_8xx.h all the time in reg.h in order to have them defined even when CONFIG_PPC_8xx is not selected. This will avoid the need for #ifdefs in C code. Guard SPRN_ICTRL in an #ifdef CONFIG_PPC_8xx as this register has same name but different meaning and different spr number as another register in the mpc7450. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/dd82934ad91aab607d0eb7e626c14e6ac0d654eb.1567068137.git.christophe.leroy@c-s.fr
2019-11-18powerpc/reg: use ASM_FTR_IFSET() instead of opencoding fixup.Christophe Leroy1-13/+3
mftb() includes a feature fixup for CELL ppc. Use ASM_FTR_IFSET() macro instead of opencoding the setup of the fixup sections. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ac19713826fa55e9e7bfe3100c5a7b1712ab9526.1566999711.git.christophe.leroy@c-s.fr
2019-10-22KVM: PPC: Book3S: Define and use SRR1_MSR_BITSNicholas Piggin1-0/+12
Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-09-21powerpc/64s: Set reserved PCR bitsJordan Niethe1-0/+3
Currently the reserved bits of the Processor Compatibility Register (PCR) are cleared as per the Programming Note in Section 1.3.3 of version 3.0B of the Power ISA. This causes all new architecture features to be made available when running on newer processors with new architecture features added to the PCR as bits must be set to disable a given feature. For example to disable new features added as part of Version 2.07 of the ISA the corresponding bit in the PCR needs to be set. As new processor features generally require explicit kernel support they should be disabled until such support is implemented. Therefore kernels should set all unknown/reserved bits in the PCR such that any new architecture features which the kernel does not currently know about get disabled. An update is planned to the ISA to clarify that the PCR is an exception to the Programming Note on reserved bits in Section 1.3.3. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190917004605.22471-2-alistair@popple.id.au
2019-09-21powerpc: Fix definition of PCR bits to work with old binutilsAlistair Popple1-3/+3
Commit 388cc6e133132 ("KVM: PPC: Book3S HV: Support POWER6 compatibility mode on POWER7") introduced new macros defining the PCR bits. When used from assembly files these definitions lead to build errors using older versions of binutils that don't support the 'ul' suffix. This fixes the build errors by updating the definitions to use the __MASK() macro which selects the appropriate suffix. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190917004605.22471-1-alistair@popple.id.au
2019-08-30powerpc: Introduce the MSR_S bitSukadev Bhattiprolu1-0/+3
Protected Execution Facility (PEF) is an architectural change for POWER 9 that enables Secure Virtual Machines (SVMs). When enabled, PEF adds a new higher privileged mode, called Ultravisor mode, to POWER architecture. The hardware changes include the following: * There is a new bit in the MSR that determines whether the current process is running in secure mode, MSR(S) bit 41. MSR(S)=1, process is in secure mode, MSR(s)=0 process is in normal mode. * The MSR(S) bit can only be set by the Ultravisor. * HRFID cannot be used to set the MSR(S) bit. If the hypervisor needs to return to a SVM it must use an ultracall. It can determine if the VM it is returning to is secure. * The privilege of a process is now determined by three MSR bits, MSR(S, HV, PR). In each of the tables below the modes are listed from least privilege to highest privilege. The higher privilege modes can access all the resources of the lower privilege modes. **Secure Mode MSR Settings** +---+---+---+---------------+ | S | HV| PR|Privilege | +===+===+===+===============+ | 1 | 0 | 1 | Problem | +---+---+---+---------------+ | 1 | 0 | 0 | Privileged(OS)| +---+---+---+---------------+ | 1 | 1 | 0 | Ultravisor | +---+---+---+---------------+ | 1 | 1 | 1 | Reserved | +---+---+---+---------------+ **Normal Mode MSR Settings** +---+---+---+---------------+ | S | HV| PR|Privilege | +===+===+===+===============+ | 0 | 0 | 1 | Problem | +---+---+---+---------------+ | 0 | 0 | 0 | Privileged(OS)| +---+---+---+---------------+ | 0 | 1 | 0 | Hypervisor | +---+---+---+---------------+ | 0 | 1 | 1 | Problem (HV) | +---+---+---+---------------+ Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> [ cclaudio: Update the commit message ] Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-7-bauerman@linux.ibm.com
2019-04-30powerpc/64s: Reimplement book3s idle code in CNicholas Piggin1-4/+4
Reimplement Book3S idle code in C, moving POWER7/8/9 implementation speific HV idle code to the powernv platform code. Book3S assembly stubs are kept in common code and used only to save the stack frame and non-volatile GPRs before executing architected idle instructions, and restoring the stack and reloading GPRs then returning to C after waking from idle. The complex logic dealing with threads and subcores, locking, SPRs, HMIs, timebase resync, etc., is all done in C which makes it more maintainable. This is not a strict translation to C code, there are some significant differences: - Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs, but saves and restores them itself. - The optimisation where EC=ESL=0 idle modes did not have to save GPRs or change MSR is restored, because it's now simple to do. ESL=1 sleeps that do not lose GPRs can use this optimization too. - KVM secondary entry and cede is now more of a call/return style rather than branchy. nap_state_lost is not required because KVM always returns via NVGPR restoring path. - KVM secondary wakeup from offline sequence is moved entirely into the offline wakeup, which avoids a hwsync in the normal idle wakeup path. Performance measured with context switch ping-pong on different threads or cores, is possibly improved a small amount, 1-3% depending on stop state and core vs thread test for shallow states. Deep states it's in the noise compared with other latencies. KVM improvements: - Idle sleepers now always return to caller rather than branch out to KVM first. - This allows optimisations like very fast return to caller when no state has been lost. - KVM no longer requires nap_state_lost because it controls NVGPR save/restore itself on the way in and out. - The heavy idle wakeup KVM request check can be moved out of the normal host idle code and into the not-performance-critical offline code. - KVM nap code now returns from where it is called, which makes the flow a bit easier to follow. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Squash the KVM changes in] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: Update comments in preparation for THREAD_INFO_IN_TASKChristophe Leroy1-1/+1
Update a few comments that talk about current_thread_info() in preparation for THREAD_INFO_IN_TASK. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/32: add helper to write into segment registersChristophe Leroy1-0/+5
This patch add an helper which wraps 'mtsrin' instruction to write into segment registers. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/6xx: Store PGDIR physical address in a SPRGChristophe Leroy1-0/+1
Use SPRN_SPRG2 to store the current thread PGDIR and avoid reading thread_struct.pgdir at every TLB miss. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/6xx: Don't use SPRN_SPRG2 for storing stack pointer while in RTASChristophe Leroy1-1/+0
When calling RTAS, the stack pointer is stored in SPRN_SPRG2 in order to be able to restore it in case of machine check in RTAS. As machine check is not a perfomance critical path, this patch frees SPRN_SPRG2 by using a field in thread struct instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21powerpc/83xx: handle machine check caused by watchdog timerChristophe Leroy1-0/+2
When the watchdog timer is set in interrupt mode, it causes a machine check when it times out. The purpose of this mode is to ease debugging, not to crash the kernel and reboot the machine. This patch implements a special handling for that, in order to not crash the kernel if the watchdog times out while in interrupt or within the idle task. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood: added missing #include] Signed-off-by: Scott Wood <oss@buserror.net>
2018-11-26powerpc: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32Christophe Leroy1-1/+1
Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config 6xx def_bool y depends on PPC32 && PPC_BOOK3S 6xx is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_6xx in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-26Merge tag 'powerpc-4.20-1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A large series to rewrite our SLB miss handling, replacing a lot of fairly complicated asm with much fewer lines of C. - Following on from that, we now maintain a cache of SLB entries for each process and preload them on context switch. Leading to a 27% speedup for our context switch benchmark on Power9. - Improvements to our handling of SLB multi-hit errors. We now print more debug information when they occur, and try to continue running by flushing the SLB and reloading, rather than treating them as fatal. - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9). - Add support for physical memory up to 2PB in the linear mapping on 64-bit Book3S. We only support up to 512TB as regular system memory, otherwise the percpu allocator runs out of vmalloc space. - Add stack protector support for 32 and 64-bit, with a per-task canary. - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP. - Support recognising "big cores" on Power9, where two SMT4 cores are presented to us as a single SMT8 core. - A large series to cleanup some of our ioremap handling and PTE flags. - Add a driver for the PAPR SCM (storage class memory) interface, allowing guests to operate on SCM devices (acked by Dan). - Changes to our ftrace code to handle very large kernels, where we need to use a trampoline to get to ftrace_caller(). And many other smaller enhancements and cleanups. Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang" * tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits) Revert "selftests/powerpc: Fix out-of-tree build errors" powerpc/msi: Fix compile error on mpc83xx powerpc: Fix stack protector crashes on CPU hotplug powerpc/traps: restore recoverability of machine_check interrupts powerpc/64/module: REL32 relocation range check powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd selftests/powerpc: Add a test of wild bctr powerpc/mm: Fix page table dump to work on Radix powerpc/mm/radix: Display if mappings are exec or not powerpc/mm/radix: Simplify split mapping logic powerpc/mm/radix: Remove the retry in the split mapping logic powerpc/mm/radix: Fix small page at boundary when splitting powerpc/mm/radix: Fix overuse of small pages in splitting logic powerpc/mm/radix: Fix off-by-one in split mapping logic powerpc/ftrace: Handle large kernel configs powerpc/mm: Fix WARN_ON with THP NUMA migration selftests/powerpc: Fix out-of-tree build errors powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 powerpc/time: isolate scaled cputime accounting in dedicated functions. ...
2018-10-09KVM: PPC: Book3S HV: Sanitise hv_regs on nested guest entrySuraj Jitindar Singh1-0/+1
restore_hv_regs() is used to copy the hv_regs L1 wants to set to run the nested (L2) guest into the vcpu structure. We need to sanitise these values to ensure we don't let the L1 guest hypervisor do things we don't want it to. We don't let data address watchpoints or completed instruction address breakpoints be set to match in hypervisor state. We also don't let L1 enable features in the hypervisor facility status and control register (HFSCR) for L2 which we have disabled for L1. That is L2 will get the subset of features which the L0 hypervisor has enabled for L1 and the features L1 wants to enable for L2. This could mean we give L1 a hypervisor facility unavailable interrupt for a facility it thinks it has enabled, however it shouldn't have enabled a facility it itself doesn't have for the L2 guest. We sanitise the registers when copying in the L2 hv_regs. We don't need to sanitise when copying back the L1 hv_regs since these shouldn't be able to contain invalid values as they're just what was copied out. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-09KVM: PPC: Book3S HV: Handle hypervisor instruction faults betterPaul Mackerras1-0/+1
Currently the code for handling hypervisor instruction page faults passes 0 for the flags indicating the type of fault, which is OK in the usual case that the page is not mapped in the partition-scoped page tables. However, there are other causes for hypervisor instruction page faults, such as not being to update a reference (R) or change (C) bit. The cause is indicated in bits in HSRR1, including a bit which indicates that the fault is due to not being able to write to a page (for example to update an R or C bit). Not handling these other kinds of faults correctly can lead to a loop of continual faults without forward progress in the guest. In order to handle these faults better, this patch constructs a "DSISR-like" value from the bits which DSISR and SRR1 (for a HISI) have in common, and passes it to kvmppc_book3s_hv_page_fault() so that it knows what caused the fault. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/tm: Remove msr_tm_active()Breno Leitao1-1/+6
Currently msr_tm_active() is a wrapper around MSR_TM_ACTIVE() if CONFIG_PPC_TRANSACTIONAL_MEM is set, or it is just a function that returns false if CONFIG_PPC_TRANSACTIONAL_MEM is not set. This function is not necessary, since MSR_TM_ACTIVE() just do the same and could be used, removing the dualism and simplifying the code. This patchset remove every instance of msr_tm_active() and replaced it by MSR_TM_ACTIVE(). Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+1
Pull first set of KVM updates from Paolo Bonzini: "PPC: - minor code cleanups x86: - PCID emulation and CR3 caching for shadow page tables - nested VMX live migration - nested VMCS shadowing - optimized IPI hypercall - some optimizations ARM will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits) kvm: x86: Set highest physical address bits in non-present/reserved SPTEs KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c KVM: X86: Implement PV IPIs in linux guest KVM: X86: Add kvm hypervisor init time platform setup callback KVM: X86: Implement "send IPI" hypercall KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs() KVM: x86: Skip pae_root shadow allocation if tdp enabled KVM/MMU: Combine flushing remote tlb in mmu_set_spte() KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup KVM: vmx: move struct host_state usage to struct loaded_vmcs KVM: vmx: compute need to reload FS/GS/LDT on demand KVM: nVMX: remove a misleading comment regarding vmcs02 fields KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state() KVM: vmx: add dedicated utility to access guest's kernel_gs_base KVM: vmx: track host_state.loaded using a loaded_vmcs pointer KVM: vmx: refactor segmentation code in vmx_save_host_state() kvm: nVMX: Fix fault priority for VMX operations kvm: nVMX: Fix fault vector for VMX operation at CPL > 0 ...
2018-07-30powerpc: clean inclusions of asm/feature-fixups.hChristophe Leroy1-0/+1
files not using feature fixup don't need asm/feature-fixups.h files using feature fixup need asm/feature-fixups.h Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-30powerpc: move ASM_CONST and stringify_in_c() into asm-const.hChristophe Leroy1-0/+1
This patch moves ASM_CONST() and stringify_in_c() into dedicated asm-const.h, then cleans all related inclusions. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: asm-compat.h should include asm-const.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18KVM: PPC: Book3S HV: Fix constant size warningNicholas Mc Guire1-1/+1
The constants are 64bit but not explicitly declared UL resulting in sparse warnings. Fix this by declaring the constants UL. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-05-31Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-nextPaul Mackerras1-6/+26
This merges in the ppc-kvm topic branch of the powerpc repository to get some changes on which future patches will depend, in particular some new exports and TEXASR bit definitions. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-05-24powerpc/reg: Add TEXASR related macrosSimon Guo1-6/+26
This patches add some macros for CR0/TEXASR bits so that PR KVM TM logic (tbegin./treclaim./tabort.) can make use of them later. Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-17KVM: PPC: Book3S HV: Set RWMR on POWER8 so PURR/SPURR count correctlyPaul Mackerras1-0/+1
Although Linux doesn't use PURR and SPURR ((Scaled) Processor Utilization of Resources Register), other OSes depend on them. On POWER8 they count at a rate depending on whether the VCPU is idle or running, the activity of the VCPU, and the value in the RWMR (Region-Weighting Mode Register). Hardware expects the hypervisor to update the RWMR when a core is dispatched to reflect the number of online VCPUs in the vcore. This adds code to maintain a count in the vcore struct indicating how many VCPUs are online. In kvmppc_run_core we use that count to set the RWMR register on POWER8. If the core is split because of a static or dynamic micro-threading mode, we use the value for 8 threads. The RWMR value is not relevant when the host is executing because Linux does not use the PURR or SPURR register, so we don't bother saving and restoring the host value. For the sake of old userspace which does not set the KVM_REG_PPC_ONLINE register, we set online to 1 if it was 0 at the time of a KVM_RUN ioctl. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-03-24KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9Paul Mackerras1-0/+7
POWER9 has hardware bugs relating to transactional memory and thread reconfiguration (changes to hardware SMT mode). Specifically, the core does not have enough storage to store a complete checkpoint of all the architected state for all four threads. The DD2.2 version of POWER9 includes hardware modifications designed to allow hypervisor software to implement workarounds for these problems. This patch implements those workarounds in KVM code so that KVM guests see a full, working transactional memory implementation. The problems center around the use of TM suspended state, where the CPU has a checkpointed state but execution is not transactional. The workaround is to implement a "fake suspend" state, which looks to the guest like suspended state but the CPU does not store a checkpoint. In this state, any instruction that would cause a transition to transactional state (rfid, rfebb, mtmsrd, tresume) or would use the checkpointed state (treclaim) causes a "soft patch" interrupt (vector 0x1500) to the hypervisor so that it can be emulated. The trechkpt instruction also causes a soft patch interrupt. On POWER9 DD2.2, we avoid returning to the guest in any state which would require a checkpoint to be present. The trechkpt in the guest entry path which would normally create that checkpoint is replaced by either a transition to fake suspend state, if the guest is in suspend state, or a rollback to the pre-transactional state if the guest is in transactional state. Fake suspend state is indicated by a flag in the PACA plus a new bit in the PSSCR. The new PSSCR bit is write-only and reads back as 0. On exit from the guest, if the guest is in fake suspend state, we still do the treclaim instruction as we would in real suspend state, in order to get into non-transactional state, but we do not save the resulting register state since there was no checkpoint. Emulation of the instructions that cause a softpatch interrupt is handled in two paths. If the guest is in real suspend mode, we call kvmhv_p9_tm_emulation_early() to handle the cases where the guest is transitioning to transactional state. This is called before we do the treclaim in the guest exit path; because we haven't done treclaim, we can get back to the guest with the transaction still active. If the instruction is a case that kvmhv_p9_tm_emulation_early() doesn't handle, or if the guest is in fake suspend state, then we proceed to do the complete guest exit path and subsequently call kvmhv_p9_tm_emulation() in host context with the MMU on. This handles all the cases including the cases that generate program interrupts (illegal instruction or TM Bad Thing) and facility unavailable interrupts. The emulation is reasonably straightforward and is mostly concerned with checking for exception conditions and updating the state of registers such as MSR and CR0. The treclaim emulation takes care to ensure that the TEXASR register gets updated as if it were the guest treclaim instruction that had done failure recording, not the treclaim done in hypervisor state in the guest exit path. With this, the KVM_CAP_PPC_HTM capability returns true (1) even if transactional memory is not available to host userspace. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21Merge branch 'topic/ppc-kvm' into nextMichael Ellerman1-2/+3
Merge the topic branch we share with kvm-ppc, this brings in two xive commits, one from Paul to rework HMI handling, and a minor cleanup to drop an unused flag.
2018-01-20powerpc: Handle exceptions caused by pkey violationRam Pai1-1/+0
Handle Data and Instruction exceptions caused by memory protection-key. The CPU will detect the key fault if the HPTE is already programmed with the key. However if the HPTE is not hashed, a key fault will not be detected by the hardware. The software will detect pkey violation in such a case. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18KVM: PPC: Book3S HV: Improve handling of debug-trigger HMIs on POWER9Paul Mackerras1-2/+3
Hypervisor maintenance interrupts (HMIs) are generated by various causes, signalled by bits in the hypervisor maintenance exception register (HMER). In most cases calling OPAL to handle the interrupt is the correct thing to do, but the "debug trigger" HMIs signalled by PPC bit 17 (bit 46) of HMER are used to invoke software workarounds for hardware bugs, and OPAL does not have any code to handle this cause. The debug trigger HMI is used in POWER9 DD2.0 and DD2.1 chips to work around a hardware bug in executing vector load instructions to cache inhibited memory. In POWER9 DD2.2 chips, it is generated when conditions are detected relating to threads being in TM (transactional memory) suspended mode when the core SMT configuration needs to be reconfigured. The kernel currently has code to detect the vector CI load condition, but only when the HMI occurs in the host, not when it occurs in a guest. If a HMI occurs in the guest, it is always passed to OPAL, and then we always re-sync the timebase, because the HMI cause might have been a timebase error, for which OPAL would re-sync the timebase, thus removing the timebase offset which KVM applied for the guest. Since we don't know what OPAL did, we don't know whether to subtract the timebase offset from the timebase, so instead we re-sync the timebase. This adds code to determine explicitly what the cause of a debug trigger HMI will be. This is based on a new device-tree property under the CPU nodes called ibm,hmi-special-triggers, if it is present, or otherwise based on the PVR (processor version register). The handling of debug trigger HMIs is pulled out into a separate function which can be called from the KVM guest exit code. If this function handles and clears the HMI, and no other HMI causes remain, then we skip calling OPAL and we proceed to subtract the guest timebase offset from the timebase. The overall handling for HMIs that occur in the host (i.e. not in a KVM guest) is largely unchanged, except that we now don't set the flag for the vector CI load workaround on DD2.2 processors. This also removes a BUG_ON in the KVM code. BUG_ON is generally not useful in KVM guest entry/exit code since it is difficult to handle the resulting trap gracefully. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 05:56:39 +0000