diff options
Diffstat (limited to 'net/mac80211/mlme.c')
-rw-r--r-- | net/mac80211/mlme.c | 167 |
1 files changed, 162 insertions, 5 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0aee2392dd29..60792dfabc9d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8,7 +8,7 @@ * Copyright 2007, Michael Wu <flamingice@sourmilk.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2022 Intel Corporation + * Copyright (C) 2018 - 2023 Intel Corporation */ #include <linux/delay.h> @@ -89,6 +89,80 @@ MODULE_PARM_DESC(probe_wait_ms, #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 /* + * Extract from the given disabled subchannel bitmap (raw format + * from the EHT Operation Element) the bits for the subchannel + * we're using right now. + */ +static u16 +ieee80211_extract_dis_subch_bmap(const struct ieee80211_eht_operation *eht_oper, + struct cfg80211_chan_def *chandef, u16 bitmap) +{ + struct ieee80211_eht_operation_info *info = (void *)eht_oper->optional; + struct cfg80211_chan_def ap_chandef = *chandef; + u32 ap_center_freq, local_center_freq; + u32 ap_bw, local_bw; + int ap_start_freq, local_start_freq; + u16 shift, mask; + + if (!(eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) || + !(eht_oper->params & + IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) + return 0; + + /* set 160/320 supported to get the full AP definition */ + ieee80211_chandef_eht_oper(eht_oper, true, true, &ap_chandef); + ap_center_freq = ap_chandef.center_freq1; + ap_bw = 20 * BIT(u8_get_bits(info->control, + IEEE80211_EHT_OPER_CHAN_WIDTH)); + ap_start_freq = ap_center_freq - ap_bw / 2; + local_center_freq = chandef->center_freq1; + local_bw = 20 * BIT(ieee80211_chan_width_to_rx_bw(chandef->width)); + local_start_freq = local_center_freq - local_bw / 2; + shift = (local_start_freq - ap_start_freq) / 20; + mask = BIT(local_bw / 20) - 1; + + return (bitmap >> shift) & mask; +} + +/* + * Handle the puncturing bitmap, possibly downgrading bandwidth to get a + * valid bitmap. + */ +static void +ieee80211_handle_puncturing_bitmap(struct ieee80211_link_data *link, + const struct ieee80211_eht_operation *eht_oper, + u16 bitmap, u64 *changed) +{ + struct cfg80211_chan_def *chandef = &link->conf->chandef; + u16 extracted; + u64 _changed = 0; + + if (!changed) + changed = &_changed; + + while (chandef->width > NL80211_CHAN_WIDTH_40) { + extracted = + ieee80211_extract_dis_subch_bmap(eht_oper, chandef, + bitmap); + + if (cfg80211_valid_disable_subchannel_bitmap(&bitmap, + chandef)) + break; + link->u.mgd.conn_flags |= + ieee80211_chandef_downgrade(chandef); + *changed |= BSS_CHANGED_BANDWIDTH; + } + + if (chandef->width <= NL80211_CHAN_WIDTH_40) + extracted = 0; + + if (link->conf->eht_puncturing != extracted) { + link->conf->eht_puncturing = extracted; + *changed |= BSS_CHANGED_EHT_PUNCTURING; + } +} + +/* * We can have multiple work items (and connection probing) * scheduling this timer, but we need to take care to only * reschedule it when it should fire _earlier_ than it was @@ -413,7 +487,7 @@ static int ieee80211_config_bw(struct ieee80211_link_data *link, const struct ieee80211_he_operation *he_oper, const struct ieee80211_eht_operation *eht_oper, const struct ieee80211_s1g_oper_ie *s1g_oper, - const u8 *bssid, u32 *changed) + const u8 *bssid, u64 *changed) { struct ieee80211_sub_if_data *sdata = link->sdata; struct ieee80211_local *local = sdata->local; @@ -1704,7 +1778,7 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link) return; } - cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, 0); + cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, 0, 0); } void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) @@ -1914,7 +1988,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, mutex_unlock(&local->mtx); cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, 0, - csa_ie.count, csa_ie.mode); + csa_ie.count, csa_ie.mode, 0); if (local->ops->channel_switch) { /* use driver's channel switch callback */ @@ -4145,6 +4219,7 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, link_sta); bss_conf->eht_support = link_sta->pub->eht_cap.has_eht; + *changed |= BSS_CHANGED_EHT_PUNCTURING; } else { bss_conf->eht_support = false; } @@ -5477,6 +5552,45 @@ static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); } +static bool ieee80211_config_puncturing(struct ieee80211_link_data *link, + const struct ieee80211_eht_operation *eht_oper, + u64 *changed) +{ + u16 bitmap = 0, extracted; + + if ((eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) && + (eht_oper->params & + IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) { + const struct ieee80211_eht_operation_info *info = + (void *)eht_oper->optional; + const u8 *disable_subchannel_bitmap = info->optional; + + bitmap = get_unaligned_le16(disable_subchannel_bitmap); + } + + extracted = ieee80211_extract_dis_subch_bmap(eht_oper, + &link->conf->chandef, + bitmap); + + /* accept if there are no changes */ + if (!(*changed & BSS_CHANGED_BANDWIDTH) && + extracted == link->conf->eht_puncturing) + return true; + + if (!cfg80211_valid_disable_subchannel_bitmap(&bitmap, + &link->conf->chandef)) { + link_info(link, + "Got an invalid disable subchannel bitmap from AP %pM: bitmap = 0x%x, bw = 0x%x. disconnect\n", + link->u.mgd.bssid, + bitmap, + link->conf->chandef.width); + return false; + } + + ieee80211_handle_puncturing_bitmap(link, eht_oper, bitmap, changed); + return true; +} + static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, struct ieee80211_hdr *hdr, size_t len, struct ieee80211_rx_status *rx_status) @@ -5494,7 +5608,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, struct ieee80211_channel *chan; struct link_sta_info *link_sta; struct sta_info *sta; - u32 changed = 0; + u64 changed = 0; bool erp_valid; u8 erp_value = 0; u32 ncrc = 0; @@ -5791,6 +5905,21 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, elems->pwr_constr_elem, elems->cisco_dtpc_elem); + if (elems->eht_operation && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) { + if (!ieee80211_config_puncturing(link, elems->eht_operation, + &changed)) { + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + true, deauth_buf); + ieee80211_report_disconnect(sdata, deauth_buf, + sizeof(deauth_buf), true, + WLAN_REASON_DEAUTH_LEAVING, + false); + goto free; + } + } + ieee80211_link_info_change_notify(sdata, link, changed); free: kfree(elems); @@ -6892,9 +7021,12 @@ ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); } + link->conf->eht_puncturing = 0; + rcu_read_lock(); beacon_ies = rcu_dereference(cbss->beacon_ies); if (beacon_ies) { + const struct ieee80211_eht_operation *eht_oper; const struct element *elem; u8 dtim_count = 0; @@ -6923,6 +7055,31 @@ ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, link->conf->ema_ap = true; else link->conf->ema_ap = false; + + elem = cfg80211_find_ext_elem(WLAN_EID_EXT_EHT_OPERATION, + beacon_ies->data, beacon_ies->len); + eht_oper = (const void *)(elem->data + 1); + + if (elem && + ieee80211_eht_oper_size_ok((const void *)(elem->data + 1), + elem->datalen - 1) && + (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) && + (eht_oper->params & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) { + const struct ieee80211_eht_operation_info *info = + (void *)eht_oper->optional; + const u8 *disable_subchannel_bitmap = info->optional; + u16 bitmap; + + bitmap = get_unaligned_le16(disable_subchannel_bitmap); + if (cfg80211_valid_disable_subchannel_bitmap(&bitmap, + &link->conf->chandef)) + ieee80211_handle_puncturing_bitmap(link, + eht_oper, + bitmap, + NULL); + else + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } } rcu_read_unlock(); |