1 files changed, 135 insertions, 78 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 774663e8e1fe..cd9697edf860 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2566,7 +2566,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	shost->max_cmd_len = 16;
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		shost->dma_boundary =
-			phba->sli4_hba.pc_sli4_params.sge_supp_len;
+			phba->sli4_hba.pc_sli4_params.sge_supp_len-1;
 		shost->sg_tablesize = phba->cfg_sg_seg_cnt;
 	}
 
@@ -2600,15 +2600,6 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	init_timer(&vport->els_tmofunc);
 	vport->els_tmofunc.function = lpfc_els_timeout;
 	vport->els_tmofunc.data = (unsigned long)vport;
-	if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) {
-		phba->menlo_flag |= HBA_MENLO_SUPPORT;
-		/* check for menlo minimum sg count */
-		if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT) {
-			phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT;
-			shost->sg_tablesize = phba->cfg_sg_seg_cnt;
-		}
-	}
-
 	error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
 	if (error)
 		goto out_put_shost;
@@ -3236,12 +3227,26 @@ lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
 
 	if (!vport)
 		return NULL;
-	ndlp = lpfc_findnode_did(vport, Fabric_DID);
-	if (!ndlp)
-		return NULL;
 	phba = vport->phba;
 	if (!phba)
 		return NULL;
+	ndlp = lpfc_findnode_did(vport, Fabric_DID);
+	if (!ndlp) {
+		/* Cannot find existing Fabric ndlp, so allocate a new one */
+		ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
+		if (!ndlp)
+			return 0;
+		lpfc_nlp_init(vport, ndlp, Fabric_DID);
+		/* Set the node type */
+		ndlp->nlp_type |= NLP_FABRIC;
+		/* Put ndlp onto node list */
+		lpfc_enqueue_node(vport, ndlp);
+	} else if (!NLP_CHK_NODE_ACT(ndlp)) {
+		/* re-setup ndlp without removing from node list */
+		ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
+		if (!ndlp)
+			return 0;
+	}
 	if (phba->pport->port_state <= LPFC_FLOGI)
 		return NULL;
 	/* If virtual link is not yet instantiated ignore CVL */
@@ -3304,11 +3309,20 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 	switch (event_type) {
 	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
 	case LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD:
-		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
-			"2546 New FCF found/FCF parameter modified event: "
-			"evt_tag:x%x, fcf_index:x%x\n",
-			acqe_fcoe->event_tag, acqe_fcoe->index);
-
+		if (event_type == LPFC_FCOE_EVENT_TYPE_NEW_FCF)
+			lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
+					LOG_DISCOVERY,
+					"2546 New FCF found event: "
+					"evt_tag:x%x, fcf_index:x%x\n",
+					acqe_fcoe->event_tag,
+					acqe_fcoe->index);
+		else
+			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP |
+					LOG_DISCOVERY,
+					"2788 FCF parameter modified event: "
+					"evt_tag:x%x, fcf_index:x%x\n",
+					acqe_fcoe->event_tag,
+					acqe_fcoe->index);
 		spin_lock_irq(&phba->hbalock);
 		if ((phba->fcf.fcf_flag & FCF_SCAN_DONE) ||
 		    (phba->hba_flag & FCF_DISC_INPROGRESS)) {
@@ -3517,6 +3531,32 @@ lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
 }
 
 /**
+ * lpfc_sli4_async_grp5_evt - Process the asynchronous group5 event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async grp5 completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous grp5 event. A grp5 event
+ * is an asynchronous notified of a logical link speed change.  The Port
+ * reports the logical link speed in units of 10Mbps.
+ **/
+static void
+lpfc_sli4_async_grp5_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_grp5 *acqe_grp5)
+{
+	uint16_t prev_ll_spd;
+
+	phba->fc_eventTag = acqe_grp5->event_tag;
+	phba->fcoe_eventtag = acqe_grp5->event_tag;
+	prev_ll_spd = phba->sli4_hba.link_state.logical_speed;
+	phba->sli4_hba.link_state.logical_speed =
+		(bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5));
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2789 GRP5 Async Event: Updating logical link speed "
+			"from %dMbps to %dMbps\n", (prev_ll_spd * 10),
+			(phba->sli4_hba.link_state.logical_speed*10));
+}
+
+/**
  * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
  * @phba: pointer to lpfc hba data structure.
  *
@@ -3552,6 +3592,10 @@ void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
 			lpfc_sli4_async_dcbx_evt(phba,
 						 &cq_event->cqe.acqe_dcbx);
 			break;
+		case LPFC_TRAILER_CODE_GRP5:
+			lpfc_sli4_async_grp5_evt(phba,
+						 &cq_event->cqe.acqe_grp5);
+			break;
 		default:
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"1804 Invalid asynchrous event code: "
@@ -3813,6 +3857,13 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
 
 	/* Get all the module params for configuring this host */
 	lpfc_get_cfgparam(phba);
+	if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) {
+		phba->menlo_flag |= HBA_MENLO_SUPPORT;
+		/* check for menlo minimum sg count */
+		if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT)
+			phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT;
+	}
+
 	/*
 	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
 	 * used to create the sg_dma_buf_pool must be dynamically calculated.
@@ -4030,6 +4081,43 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	if (unlikely(rc))
 		goto out_free_bsmbx;
 
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
+						       GFP_KERNEL);
+	if (!mboxq) {
+		rc = -ENOMEM;
+		goto out_free_bsmbx;
+	}
+
+	/* Get the Supported Pages. It is always available. */
+	lpfc_supported_pages(mboxq);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		goto out_free_bsmbx;
+	}
+
+	mqe = &mboxq->u.mqe;
+	memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
+	       LPFC_MAX_SUPPORTED_PAGES);
+	for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
+		switch (pn_page[i]) {
+		case LPFC_SLI4_PARAMETERS:
+			phba->sli4_hba.pc_sli4_params.supported = 1;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Read the port's SLI4 Parameters capabilities if supported. */
+	if (phba->sli4_hba.pc_sli4_params.supported)
+		rc = lpfc_pc_sli4_params_get(phba, mboxq);
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	if (rc) {
+		rc = -EIO;
+		goto out_free_bsmbx;
+	}
 	/* Create all the SLI4 queues */
 	rc = lpfc_sli4_queue_create(phba);
 	if (rc)
@@ -4090,43 +4178,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		goto out_free_fcp_eq_hdl;
 	}
 
-	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
-						       GFP_KERNEL);
-	if (!mboxq) {
-		rc = -ENOMEM;
-		goto out_free_fcp_eq_hdl;
-	}
-
-	/* Get the Supported Pages. It is always available. */
-	lpfc_supported_pages(mboxq);
-	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	if (unlikely(rc)) {
-		rc = -EIO;
-		mempool_free(mboxq, phba->mbox_mem_pool);
-		goto out_free_fcp_eq_hdl;
-	}
-
-	mqe = &mboxq->u.mqe;
-	memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
-	       LPFC_MAX_SUPPORTED_PAGES);
-	for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
-		switch (pn_page[i]) {
-		case LPFC_SLI4_PARAMETERS:
-			phba->sli4_hba.pc_sli4_params.supported = 1;
-			break;
-		default:
-			break;
-		}
-	}
-
-	/* Read the port's SLI4 Parameters capabilities if supported. */
-	if (phba->sli4_hba.pc_sli4_params.supported)
-		rc = lpfc_pc_sli4_params_get(phba, mboxq);
-	mempool_free(mboxq, phba->mbox_mem_pool);
-	if (rc) {
-		rc = -EIO;
-		goto out_free_fcp_eq_hdl;
-	}
 	return rc;
 
 out_free_fcp_eq_hdl:
@@ -5050,6 +5101,8 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
 
 	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
 	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+	phba->mbox_ext = (phba->slim2p.virt +
+		offsetof(struct lpfc_sli2_slim, mbx_ext_words));
 	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
 	phba->IOCBs = (phba->slim2p.virt +
 		       offsetof(struct lpfc_sli2_slim, IOCBs));
@@ -7753,21 +7806,23 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is called to prepare the SLI3 device for PCI slot recover. It
- * aborts and stops all the on-going I/Os on the pci device.
+ * aborts all the outstanding SCSI I/Os to the pci device.
  **/
 static void
 lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
 {
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring  *pring;
+
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"2723 PCI channel I/O abort preparing for recovery\n");
-	/* Prepare for bringing HBA offline */
-	lpfc_offline_prep(phba);
-	/* Clear sli active flag to prevent sysfs access to HBA */
-	spin_lock_irq(&phba->hbalock);
-	phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
-	spin_unlock_irq(&phba->hbalock);
-	/* Stop and flush all I/Os and bring HBA offline */
-	lpfc_offline(phba);
+
+	/*
+	 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
+	 * and let the SCSI mid-layer to retry them to recover.
+	 */
+	pring = &psli->ring[psli->fcp_ring];
+	lpfc_sli_abort_iocb_ring(phba, pring);
 }
 
 /**
@@ -7781,21 +7836,20 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
 static void
 lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring  *pring;
-
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"2710 PCI channel disable preparing for reset\n");
+
+	/* Block all SCSI devices' I/Os on the host */
+	lpfc_scsi_dev_block(phba);
+
+	/* stop all timers */
+	lpfc_stop_hba_timers(phba);
+
 	/* Disable interrupt and pci device */
 	lpfc_sli_disable_intr(phba);
 	pci_disable_device(phba->pcidev);
-	/*
-	 * There may be I/Os dropped by the firmware.
-	 * Error iocb (I/O) on txcmplq and let the SCSI layer
-	 * retry it after re-establishing link.
-	 */
-	pring = &psli->ring[psli->fcp_ring];
-	lpfc_sli_abort_iocb_ring(phba, pring);
+	/* Flush all driver's outstanding SCSI I/Os as we are to reset */
+	lpfc_sli_flush_fcp_rings(phba);
 }
 
 /**
@@ -7811,6 +7865,12 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
 {
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"2711 PCI channel permanent disable for failure\n");
+	/* Block all SCSI devices' I/Os on the host */
+	lpfc_scsi_dev_block(phba);
+
+	/* stop all timers */
+	lpfc_stop_hba_timers(phba);
+
 	/* Clean up all driver's outstanding SCSI I/Os */
 	lpfc_sli_flush_fcp_rings(phba);
 }
@@ -7839,9 +7899,6 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
-	/* Block all SCSI devices' I/Os on the host */
-	lpfc_scsi_dev_block(phba);
-
 	switch (state) {
 	case pci_channel_io_normal:
 		/* Non-fatal error, prepare for recovery */
@@ -7948,7 +8005,7 @@ lpfc_io_resume_s3(struct pci_dev *pdev)
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
-	/* Bring the device online */
+	/* Bring device online, it will be no-op for non-fatal error resume */
 	lpfc_online(phba);
 
 	/* Clean up Advanced Error Reporting (AER) if needed */