diff options
Diffstat (limited to 'drivers/pwm')
| -rw-r--r-- | drivers/pwm/Kconfig | 108 | ||||
| -rw-r--r-- | drivers/pwm/Makefile | 11 | ||||
| -rw-r--r-- | drivers/pwm/core.c | 713 | ||||
| -rw-r--r-- | drivers/pwm/pwm-bfin.c | 162 | ||||
| -rw-r--r-- | drivers/pwm/pwm-imx.c | 230 | ||||
| -rw-r--r-- | drivers/pwm/pwm-lpc32xx.c | 148 | ||||
| -rw-r--r-- | drivers/pwm/pwm-mxs.c | 203 | ||||
| -rw-r--r-- | drivers/pwm/pwm-pxa.c | 218 | ||||
| -rw-r--r-- | drivers/pwm/pwm-samsung.c | 356 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tegra.c | 261 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tiecap.c | 232 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tiehrpwm.c | 411 | ||||
| -rw-r--r-- | drivers/pwm/pwm-vt8500.c | 177 |
13 files changed, 3230 insertions, 0 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig new file mode 100644 index 000000000000..8fc3808d7a3e --- /dev/null +++ b/drivers/pwm/Kconfig @@ -0,0 +1,108 @@ +menuconfig PWM + bool "PWM Support" + depends on !MACH_JZ4740 && !PUV3_PWM + help + This enables PWM support through the generic PWM framework. + You only need to enable this, if you also want to enable + one or more of the PWM drivers below. + + If unsure, say N. + +if PWM + +config PWM_BFIN + tristate "Blackfin PWM support" + depends on BFIN_GPTIMERS + help + Generic PWM framework driver for Blackfin. + + To compile this driver as a module, choose M here: the module + will be called pwm-bfin. + +config PWM_IMX + tristate "i.MX pwm support" + depends on ARCH_MXC + help + Generic PWM framework driver for i.MX. + + To compile this driver as a module, choose M here: the module + will be called pwm-imx. + +config PWM_LPC32XX + tristate "LPC32XX PWM support" + depends on ARCH_LPC32XX + help + Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two + PWM controllers. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpc32xx. + +config PWM_MXS + tristate "Freescale MXS PWM support" + depends on ARCH_MXS && OF + select STMP_DEVICE + help + Generic PWM framework driver for Freescale MXS. + + To compile this driver as a module, choose M here: the module + will be called pwm-mxs. + +config PWM_PXA + tristate "PXA PWM support" + depends on ARCH_PXA + help + Generic PWM framework driver for PXA. + + To compile this driver as a module, choose M here: the module + will be called pwm-pxa. + +config PWM_SAMSUNG + tristate "Samsung pwm support" + depends on PLAT_SAMSUNG + help + Generic PWM framework driver for Samsung. + + To compile this driver as a module, choose M here: the module + will be called pwm-samsung. + +config PWM_TEGRA + tristate "NVIDIA Tegra PWM support" + depends on ARCH_TEGRA + help + Generic PWM framework driver for the PWFM controller found on NVIDIA + Tegra SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-tegra. + +config PWM_TIECAP + tristate "ECAP PWM support" + depends on SOC_AM33XX + help + PWM driver support for the ECAP APWM controller found on AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called pwm-tiecap. + +config PWM_TIEHRPWM + tristate "EHRPWM PWM support" + depends on SOC_AM33XX + help + PWM driver support for the EHRPWM controller found on AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called pwm-tiehrpwm. + +config PWM_VT8500 + tristate "vt8500 pwm support" + depends on ARCH_VT8500 + help + Generic PWM framework driver for vt8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-vt8500. + +endif diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile new file mode 100644 index 000000000000..e4b2c898964d --- /dev/null +++ b/drivers/pwm/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_PWM) += core.o +obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o +obj-$(CONFIG_PWM_IMX) += pwm-imx.o +obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o +obj-$(CONFIG_PWM_MXS) += pwm-mxs.o +obj-$(CONFIG_PWM_PXA) += pwm-pxa.o +obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o +obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o +obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o +obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o +obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c new file mode 100644 index 000000000000..ecb76909e946 --- /dev/null +++ b/drivers/pwm/core.c @@ -0,0 +1,713 @@ +/* + * Generic pwmlib implementation + * + * Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2011-2012 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/pwm.h> +#include <linux/radix-tree.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#define MAX_PWMS 1024 + +static DEFINE_MUTEX(pwm_lookup_lock); +static LIST_HEAD(pwm_lookup_list); +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_chips); +static DECLARE_BITMAP(allocated_pwms, MAX_PWMS); +static RADIX_TREE(pwm_tree, GFP_KERNEL); + +static struct pwm_device *pwm_to_device(unsigned int pwm) +{ + return radix_tree_lookup(&pwm_tree, pwm); +} + +static int alloc_pwms(int pwm, unsigned int count) +{ + unsigned int from = 0; + unsigned int start; + + if (pwm >= MAX_PWMS) + return -EINVAL; + + if (pwm >= 0) + from = pwm; + + start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, from, + count, 0); + + if (pwm >= 0 && start != pwm) + return -EEXIST; + + if (start + count > MAX_PWMS) + return -ENOSPC; + + return start; +} + +static void free_pwms(struct pwm_chip *chip) +{ + unsigned int i; + + for (i = 0; i < chip->npwm; i++) { + struct pwm_device *pwm = &chip->pwms[i]; + radix_tree_delete(&pwm_tree, pwm->pwm); + } + + bitmap_clear(allocated_pwms, chip->base, chip->npwm); + + kfree(chip->pwms); + chip->pwms = NULL; +} + +static struct pwm_chip *pwmchip_find_by_name(const char *name) +{ + struct pwm_chip *chip; + + if (!name) + return NULL; + + mutex_lock(&pwm_lock); + + list_for_each_entry(chip, &pwm_chips, list) { + const char *chip_name = dev_name(chip->dev); + + if (chip_name && strcmp(chip_name, name) == 0) { + mutex_unlock(&pwm_lock); + return chip; + } + } + + mutex_unlock(&pwm_lock); + + return NULL; +} + +static int pwm_device_request(struct pwm_device *pwm, const char *label) +{ + int err; + + if (test_bit(PWMF_REQUESTED, &pwm->flags)) + return -EBUSY; + + if (!try_module_get(pwm->chip->ops->owner)) + return -ENODEV; + + if (pwm->chip->ops->request) { + err = pwm->chip->ops->request(pwm->chip, pwm); + if (err) { + module_put(pwm->chip->ops->owner); + return err; + } + } + + set_bit(PWMF_REQUESTED, &pwm->flags); + pwm->label = label; + + return 0; +} + +static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, + const struct of_phandle_args *args) +{ + struct pwm_device *pwm; + + if (pc->of_pwm_n_cells < 2) + return ERR_PTR(-EINVAL); + + if (args->args[0] >= pc->npwm) + return ERR_PTR(-EINVAL); + + pwm = pwm_request_from_chip(pc, args->args[0], NULL); + if (IS_ERR(pwm)) + return pwm; + + pwm_set_period(pwm, args->args[1]); + + return pwm; +} + +void of_pwmchip_add(struct pwm_chip *chip) +{ + if (!chip->dev || !chip->dev->of_node) + return; + + if (!chip->of_xlate) { + chip->of_xlate = of_pwm_simple_xlate; + chip->of_pwm_n_cells = 2; + } + + of_node_get(chip->dev->of_node); +} + +void of_pwmchip_remove(struct pwm_chip *chip) +{ + if (chip->dev && chip->dev->of_node) + of_node_put(chip->dev->of_node); +} + +/** + * pwm_set_chip_data() - set private chip data for a PWM + * @pwm: PWM device + * @data: pointer to chip-specific data + */ +int pwm_set_chip_data(struct pwm_device *pwm, void *data) +{ + if (!pwm) + return -EINVAL; + + pwm->chip_data = data; + + return 0; +} + +/** + * pwm_get_chip_data() - get private chip data for a PWM + * @pwm: PWM device + */ +void *pwm_get_chip_data(struct pwm_device *pwm) +{ + return pwm ? pwm->chip_data : NULL; +} + +/** + * pwmchip_add() - register a new PWM chip + * @chip: the PWM chip to add + * + * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base + * will be used. + */ +int pwmchip_add(struct pwm_chip *chip) +{ + struct pwm_device *pwm; + unsigned int i; + int ret; + + if (!chip || !chip->dev || !chip->ops || !chip->ops->config || + !chip->ops->enable || !chip->ops->disable) + return -EINVAL; + + mutex_lock(&pwm_lock); + + ret = alloc_pwms(chip->base, chip->npwm); + if (ret < 0) + goto out; + + chip->pwms = kzalloc(chip->npwm * sizeof(*pwm), GFP_KERNEL); + if (!chip->pwms) { + ret = -ENOMEM; + goto out; + } + + chip->base = ret; + + for (i = 0; i < chip->npwm; i++) { + pwm = &chip->pwms[i]; + + pwm->chip = chip; + pwm->pwm = chip->base + i; + pwm->hwpwm = i; + + radix_tree_insert(&pwm_tree, pwm->pwm, pwm); + } + + bitmap_set(allocated_pwms, chip->base, chip->npwm); + + INIT_LIST_HEAD(&chip->list); + list_add(&chip->list, &pwm_chips); + + ret = 0; + + if (IS_ENABLED(CONFIG_OF)) + of_pwmchip_add(chip); + +out: + mutex_unlock(&pwm_lock); + return ret; +} +EXPORT_SYMBOL_GPL(pwmchip_add); + +/** + * pwmchip_remove() - remove a PWM chip + * @chip: the PWM chip to remove + * + * Removes a PWM chip. This function may return busy if the PWM chip provides + * a PWM device that is still requested. + */ +int pwmchip_remove(struct pwm_chip *chip) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&pwm_lock); + + for (i = 0; i < chip->npwm; i++) { + struct pwm_device *pwm = &chip->pwms[i]; + + if (test_bit(PWMF_REQUESTED, &pwm->flags)) { + ret = -EBUSY; + goto out; + } + } + + list_del_init(&chip->list); + + if (IS_ENABLED(CONFIG_OF)) + of_pwmchip_remove(chip); + + free_pwms(chip); + +out: + mutex_unlock(&pwm_lock); + return ret; +} +EXPORT_SYMBOL_GPL(pwmchip_remove); + +/** + * pwm_request() - request a PWM device + * @pwm_id: global PWM device index + * @label: PWM device label + * + * This function is deprecated, use pwm_get() instead. + */ +struct pwm_device *pwm_request(int pwm, const char *label) +{ + struct pwm_device *dev; + int err; + + if (pwm < 0 || pwm >= MAX_PWMS) + return ERR_PTR(-EINVAL); + + mutex_lock(&pwm_lock); + + dev = pwm_to_device(pwm); + if (!dev) { + dev = ERR_PTR(-EPROBE_DEFER); + goto out; + } + + err = pwm_device_request(dev, label); + if (err < 0) + dev = ERR_PTR(err); + +out: + mutex_unlock(&pwm_lock); + + return dev; +} +EXPORT_SYMBOL_GPL(pwm_request); + +/** + * pwm_request_from_chip() - request a PWM device relative to a PWM chip + * @chip: PWM chip + * @index: per-chip index of the PWM to request + * @label: a literal description string of this PWM + * + * Returns the PWM at the given index of the given PWM chip. A negative error + * code is returned if the index is not valid for the specified PWM chip or + * if the PWM device cannot be requested. + */ +struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, + unsigned int index, + const char *label) +{ + struct pwm_device *pwm; + int err; + + if (!chip || index >= chip->npwm) + return ERR_PTR(-EINVAL); + + mutex_lock(&pwm_lock); + pwm = &chip->pwms[index]; + + err = pwm_device_request(pwm, label); + if (err < 0) + pwm = ERR_PTR(err); + + mutex_unlock(&pwm_lock); + return pwm; +} +EXPORT_SYMBOL_GPL(pwm_request_from_chip); + +/** + * pwm_free() - free a PWM device + * @pwm: PWM device + * + * This function is deprecated, use pwm_put() instead. + */ +void pwm_free(struct pwm_device *pwm) +{ + pwm_put(pwm); +} +EXPORT_SYMBOL_GPL(pwm_free); + +/** + * pwm_config() - change a PWM device configuration + * @pwm: PWM device + * @duty_ns: "on" time (in nanoseconds) + * @period_ns: duration (in nanoseconds) of one cycle + */ +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + if (!pwm || period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + return pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns); +} +EXPORT_SYMBOL_GPL(pwm_config); + +/** + * pwm_enable() - start a PWM output toggling + * @pwm: PWM device + */ +int pwm_enable(struct pwm_device *pwm) +{ + if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags)) + return pwm->chip->ops->enable(pwm->chip, pwm); + + return pwm ? 0 : -EINVAL; +} +EXPORT_SYMBOL_GPL(pwm_enable); + +/** + * pwm_disable() - stop a PWM output toggling + * @pwm: PWM device + */ +void pwm_disable(struct pwm_device *pwm) +{ + if (pwm && test_and_clear_bit(PWMF_ENABLED, &pwm->flags)) + pwm->chip->ops->disable(pwm->chip, pwm); +} +EXPORT_SYMBOL_GPL(pwm_disable); + +static struct pwm_chip *of_node_to_pwmchip(struct device_node *np) +{ + struct pwm_chip *chip; + + mutex_lock(&pwm_lock); + + list_for_each_entry(chip, &pwm_chips, list) + if (chip->dev && chip->dev->of_node == np) { + mutex_unlock(&pwm_lock); + return chip; + } + + mutex_unlock(&pwm_lock); + + return ERR_PTR(-EPROBE_DEFER); +} + +/** + * of_pwm_request() - request a PWM via the PWM framework + * @np: device node to get the PWM from + * @con_id: consumer name + * + * Returns the PWM device parsed from the phandle and index specified in the + * "pwms" property of a device tree node or a negative error-code on failure. + * Values parsed from the device tree are stored in the returned PWM device + * object. + * + * If con_id is NULL, the first PWM device listed in the "pwms" property will + * be requested. Otherwise the "pwm-names" property is used to do a reverse + * lookup of the PWM index. This also means that the "pwm-names" property + * becomes mandatory for devices that look up the PWM device via the con_id + * parameter. + */ +static struct pwm_device *of_pwm_request(struct device_node *np, + const char *con_id) +{ + struct pwm_device *pwm = NULL; + struct of_phandle_args args; + struct pwm_chip *pc; + int index = 0; + int err; + + if (con_id) { + index = of_property_match_string(np, "pwm-names", con_id); + if (index < 0) + return ERR_PTR(index); + } + + err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index, + &args); + if (err) { + pr_debug("%s(): can't parse \"pwms\" property\n", __func__); + return ERR_PTR(err); + } + + pc = of_node_to_pwmchip(args.np); + if (IS_ERR(pc)) { + pr_debug("%s(): PWM chip not found\n", __func__); + pwm = ERR_CAST(pc); + goto put; + } + + if (args.args_count != pc->of_pwm_n_cells) { + pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name, + args.np->full_name); + pwm = ERR_PTR(-EINVAL); + goto put; + } + + pwm = pc->of_xlate(pc, &args); + if (IS_ERR(pwm)) + goto put; + + /* + * If a consumer name was not given, try to look it up from the + * "pwm-names" property if it exists. Otherwise use the name of + * the user device node. + */ + if (!con_id) { + err = of_property_read_string_index(np, "pwm-names", index, + &con_id); + if (err < 0) + con_id = np->name; + } + + pwm->label = con_id; + +put: + of_node_put(args.np); + + return pwm; +} + +/** + * pwm_add_table() - register PWM device consumers + * @table: array of consumers to register + * @num: number of consumers in table + */ +void __init pwm_add_table(struct pwm_lookup *table, size_t num) +{ + mutex_lock(&pwm_lookup_lock); + + while (num--) { + list_add_tail(&table->list, &pwm_lookup_list); + table++; + } + + mutex_unlock(&pwm_lookup_lock); +} + +/** + * pwm_get() - look up and request a PWM device + * @dev: device for PWM consumer + * @con_id: consumer name + * + * Lookup is first attempted using DT. If the device was not instantiated from + * a device tree, a PWM chip and a relative index is looked up via a table + * supplied by board setup code (see pwm_add_table()). + * + * Once a PWM chip has been found the specified PWM device will be requested + * and is ready to be used. + */ +struct pwm_device *pwm_get(struct device *dev, const char *con_id) +{ + struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER); + const char *dev_id = dev ? dev_name(dev): NULL; + struct pwm_chip *chip = NULL; + unsigned int index = 0; + unsigned int best = 0; + struct pwm_lookup *p; + unsigned int match; + + /* look up via DT first */ + if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node) + return of_pwm_request(dev->of_node, con_id); + + /* + * We look up the provider in the static table typically provided by + * board setup code. We first try to lookup the consumer device by + * name. If the consumer device was passed in as NULL or if no match + * was found, we try to find the consumer by directly looking it up + * by name. + * + * If a match is found, the provider PWM chip is looked up by name + * and a PWM device is requested using the PWM device per-chip index. + * + * The lookup algorithm was shamelessly taken from the clock + * framework: + * + * We do slightly fuzzy matching here: + * An entry with a NULL ID is assumed to be a wildcard. + * If an entry has a device ID, it must match + * If an entry has a connection ID, it must match + * Then we take the most specific entry - with the following order + * of precedence: dev+con > dev only > con only. + */ + mutex_lock(&pwm_lookup_lock); + + list_for_each_entry(p, &pwm_lookup_list, list) { + match = 0; + + if (p->dev_id) { + if (!dev_id || strcmp(p->dev_id, dev_id)) + continue; + + match += 2; + } + + if (p->con_id) { + if (!con_id || strcmp(p->con_id, con_id)) + continue; + + match += 1; + } + + if (match > best) { + chip = pwmchip_find_by_name(p->provider); + index = p->index; + + if (match != 3) + best = match; + else + break; + } + } + + if (chip) + pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id); + + mutex_unlock(&pwm_lookup_lock); + + return pwm; +} +EXPORT_SYMBOL_GPL(pwm_get); + +/** + * pwm_put() - release a PWM device + * @pwm: PWM device + */ +void pwm_put(struct pwm_device *pwm) +{ + if (!pwm) + return; + + mutex_lock(&pwm_lock); + + if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) { + pr_warning("PWM device already freed\n"); + goto out; + } + + if (pwm->chip->ops->free) + pwm->chip->ops->free(pwm->chip, pwm); + + pwm->label = NULL; + + module_put(pwm->chip->ops->owner); +out: + mutex_unlock(&pwm_lock); +} +EXPORT_SYMBOL_GPL(pwm_put); + +#ifdef CONFIG_DEBUG_FS +static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s) +{ + unsigned int i; + + for (i = 0; i < chip->npwm; i++) { + struct pwm_device *pwm = &chip->pwms[i]; + + seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label); + + if (test_bit(PWMF_REQUESTED, &pwm->flags)) + seq_printf(s, " requested"); + + if (test_bit(PWMF_ENABLED, &pwm->flags)) + seq_printf(s, " enabled"); + + seq_printf(s, "\n"); + } +} + +static void *pwm_seq_start(struct seq_file *s, loff_t *pos) +{ + mutex_lock(&pwm_lock); + s->private = ""; + + return seq_list_start(&pwm_chips, *pos); +} + +static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + s->private = "\n"; + + return seq_list_next(v, &pwm_chips, pos); +} + +static void pwm_seq_stop(struct seq_file *s, void *v) +{ + mutex_unlock(&pwm_lock); +} + +static int pwm_seq_show(struct seq_file *s, void *v) +{ + struct pwm_chip *chip = list_entry(v, struct pwm_chip, list); + + seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private, + chip->dev->bus ? chip->dev->bus->name : "no-bus", + dev_name(chip->dev), chip->npwm, + (chip->npwm != 1) ? "s" : ""); + + if (chip->ops->dbg_show) + chip->ops->dbg_show(chip, s); + else + pwm_dbg_show(chip, s); + + return 0; +} + +static const struct seq_operations pwm_seq_ops = { + .start = pwm_seq_start, + .next = pwm_seq_next, + .stop = pwm_seq_stop, + .show = pwm_seq_show, +}; + +static int pwm_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &pwm_seq_ops); +} + +static const struct file_operations pwm_debugfs_ops = { + .owner = THIS_MODULE, + .open = pwm_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init pwm_debugfs_init(void) +{ + debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL, + &pwm_debugfs_ops); + + return 0; +} + +subsys_initcall(pwm_debugfs_init); +#endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c new file mode 100644 index 000000000000..d53c4e7941ef --- /dev/null +++ b/drivers/pwm/pwm-bfin.c @@ -0,0 +1,162 @@ +/* + * Blackfin Pulse Width Modulation (PWM) core + * + * Copyright (c) 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +#include <asm/gptimers.h> +#include <asm/portmux.h> + +struct bfin_pwm_chip { + struct pwm_chip chip; +}; + +struct bfin_pwm { + unsigned short pin; +}; + +static const unsigned short pwm_to_gptimer_per[] = { + P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5, + P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11, +}; + +static int bfin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv; + int ret; + + if (pwm->hwpwm >= ARRAY_SIZE(pwm_to_gptimer_per)) + return -EINVAL; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pin = pwm_to_gptimer_per[pwm->hwpwm]; + + ret = peripheral_request(priv->pin, NULL); + if (ret) { + kfree(priv); + return ret; + } + + pwm_set_chip_data(pwm, priv); + + return 0; +} + +static void bfin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + + if (priv) { + peripheral_free(priv->pin); + kfree(priv); + } +} + +static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + unsigned long period, duty; + unsigned long long val; + + if (duty_ns < 0 || duty_ns > period_ns) + return -EINVAL; + + val = (unsigned long long)get_sclk() * period_ns; + do_div(val, NSEC_PER_SEC); + period = val; + + val = (unsigned long long)period * duty_ns; + do_div(val, period_ns); + duty = period - val; + + if (duty >= period) + duty = period - 1; + + set_gptimer_config(priv->pin, TIMER_MODE_PWM | TIMER_PERIOD_CNT); + set_gptimer_pwidth(priv->pin, duty); + set_gptimer_period(priv->pin, period); + + return 0; +} + +static int bfin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + + enable_gptimer(priv->pin); + + return 0; +} + +static void bfin_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + + disable_gptimer(priv->pin); +} + +static struct pwm_ops bfin_pwm_ops = { + .request = bfin_pwm_request, + .free = bfin_pwm_free, + .config = bfin_pwm_config, + .enable = bfin_pwm_enable, + .disable = bfin_pwm_disable, + .owner = THIS_MODULE, +}; + +static int bfin_pwm_probe(struct platform_device *pdev) +{ + struct bfin_pwm_chip *pwm; + int ret; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, pwm); + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &bfin_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = 12; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int __devexit bfin_pwm_remove(struct platform_device *pdev) +{ + struct bfin_pwm_chip *pwm = platform_get_drvdata(pdev); + + return pwmchip_remove(&pwm->chip); +} + +static struct platform_driver bfin_pwm_driver = { + .driver = { + .name = "bfin-pwm", + }, + .probe = bfin_pwm_probe, + .remove = __devexit_p(bfin_pwm_remove), +}; + +module_platform_driver(bfin_pwm_driver); + +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c new file mode 100644 index 000000000000..2a0b35333972 --- /dev/null +++ b/drivers/pwm/pwm-imx.c @@ -0,0 +1,230 @@ +/* + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> +#include <mach/hardware.h> + + +/* i.MX1 and i.MX21 share the same PWM function block: */ + +#define MX1_PWMC 0x00 /* PWM Control Register */ +#define MX1_PWMS 0x04 /* PWM Sample Register */ +#define MX1_PWMP 0x08 /* PWM Period Register */ + + +/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ + +#define MX3_PWMCR 0x00 /* PWM Control Register */ +#define MX3_PWMSAR 0x0C /* PWM Sample Register */ +#define MX3_PWMPR 0x10 /* PWM Period Register */ +#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) +#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_CLKSRC_IPG (1 << 16) +#define MX3_PWMCR_EN (1 << 0) + +struct imx_chip { + struct clk *clk; + + int clk_enabled; + void __iomem *mmio_base; + + struct pwm_chip chip; +}; + +#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip) + +static int imx_pwm_config(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + + if (!(cpu_is_mx1() || cpu_is_mx21())) { + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + u32 cr; + + c = clk_get_rate(imx->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; + + if (cpu_is_mx25()) + cr |= MX3_PWMCR_CLKSRC_IPG; + else + cr |= MX3_PWMCR_CLKSRC_IPG_HIGH; + + writel(cr, imx->mmio_base + MX3_PWMCR); + } else if (cpu_is_mx1() || cpu_is_mx21()) { + /* The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enough for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(imx->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, imx->mmio_base + MX1_PWMS); + } else { + BUG(); + } + + return 0; +} + +static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct imx_chip *imx = to_imx_chip(chip); + int rc = 0; + + if (!imx->clk_enabled) { + rc = clk_prepare_enable(imx->clk); + if (!rc) + imx->clk_enabled = 1; + } + return rc; +} + +static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct imx_chip *imx = to_imx_chip(chip); + + writel(0, imx->mmio_base + MX3_PWMCR); + + if (imx->clk_enabled) { + clk_disable_unprepare(imx->clk); + imx->clk_enabled = 0; + } +} + +static struct pwm_ops imx_pwm_ops = { + .enable = imx_pwm_enable, + .disable = imx_pwm_disable, + .config = imx_pwm_config, + .owner = THIS_MODULE, +}; + +static int __devinit imx_pwm_probe(struct platform_device *pdev) +{ + struct imx_chip *imx; + struct resource *r; + int ret = 0; + + imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); + if (imx == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + imx->clk = devm_clk_get(&pdev->dev, "pwm"); + + if (IS_ERR(imx->clk)) + return PTR_ERR(imx->clk); + + imx->chip.ops = &imx_pwm_ops; + imx->chip.dev = &pdev->dev; + imx->chip.base = -1; + imx->chip.npwm = 1; + + imx->clk_enabled = 0; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + imx->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (imx->mmio_base == NULL) + return -EADDRNOTAVAIL; + + ret = pwmchip_add(&imx->chip); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, imx); + return 0; +} + +static int __devexit imx_pwm_remove(struct platform_device *pdev) +{ + struct imx_chip *imx; + + imx = platform_get_drvdata(pdev); + if (imx == NULL) + return -ENODEV; + + return pwmchip_remove(&imx->chip); +} + +static struct platform_driver imx_pwm_driver = { + .driver = { + .name = "mxc_pwm", + }, + .probe = imx_pwm_probe, + .remove = __devexit_p(imx_pwm_remove), +}; + +static int __init imx_pwm_init(void) +{ + return platform_driver_register(&imx_pwm_driver); +} +arch_initcall(imx_pwm_init); + +static void __exit imx_pwm_exit(void) +{ + platform_driver_unregister(&imx_pwm_driver); +} +module_exit(imx_pwm_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c new file mode 100644 index 000000000000..adb87f0c1633 --- /dev/null +++ b/drivers/pwm/pwm-lpc32xx.c @@ -0,0 +1,148 @@ +/* + * Copyright 2012 Alexandre Pereira da Silva <aletes.xgr@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +struct lpc32xx_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; +}; + +#define PWM_ENABLE (1 << 31) +#define PWM_RELOADV(x) (((x) & 0xFF) << 8) +#define PWM_DUTY(x) ((x) & 0xFF) + +#define to_lpc32xx_pwm_chip(_chip) \ + container_of(_chip, struct lpc32xx_pwm_chip, chip) + +static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); + unsigned long long c; + int period_cycles, duty_cycles; + + c = clk_get_rate(lpc32xx->clk) / 256; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + + /* Handle high and low extremes */ + if (c == 0) + c = 1; + if (c > 255) + c = 0; /* 0 set division by 256 */ + period_cycles = c; + + c = 256 * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + writel(PWM_ENABLE | PWM_RELOADV(period_cycles) | PWM_DUTY(duty_cycles), + lpc32xx->base + (pwm->hwpwm << 2)); + + return 0; +} + +static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); + + return clk_enable(lpc32xx->clk); +} + +static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); + + writel(0, lpc32xx->base + (pwm->hwpwm << 2)); + clk_disable(lpc32xx->clk); +} + +static const struct pwm_ops lpc32xx_pwm_ops = { + .config = lpc32xx_pwm_config, + .enable = lpc32xx_pwm_enable, + .disable = lpc32xx_pwm_disable, + .owner = THIS_MODULE, +}; + +static int lpc32xx_pwm_probe(struct platform_device *pdev) +{ + struct lpc32xx_pwm_chip *lpc32xx; + struct resource *res; + int ret; + + lpc32xx = devm_kzalloc(&pdev->dev, sizeof(*lpc32xx), GFP_KERNEL); + if (!lpc32xx) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + lpc32xx->base = devm_request_and_ioremap(&pdev->dev, res); + if (!lpc32xx->base) + return -EADDRNOTAVAIL; + + lpc32xx->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(lpc32xx->clk)) + return PTR_ERR(lpc32xx->clk); + + lpc32xx->chip.dev = &pdev->dev; + lpc32xx->chip.ops = &lpc32xx_pwm_ops; + lpc32xx->chip.npwm = 2; + + ret = pwmchip_add(&lpc32xx->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, lpc32xx); + + return 0; +} + +static int __devexit lpc32xx_pwm_remove(struct platform_device *pdev) +{ + struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev); + + clk_disable(lpc32xx->clk); + return pwmchip_remove(&lpc32xx->chip); +} + +static struct of_device_id lpc32xx_pwm_dt_ids[] = { + { .compatible = "nxp,lpc3220-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, lpc32xx_pwm_dt_ids); + +static struct platform_driver lpc32xx_pwm_driver = { + .driver = { + .name = "lpc32xx-pwm", + .of_match_table = of_match_ptr(lpc32xx_pwm_dt_ids), + }, + .probe = lpc32xx_pwm_probe, + .remove = __devexit_p(lpc32xx_pwm_remove), +}; +module_platform_driver(lpc32xx_pwm_driver); + +MODULE_ALIAS("platform:lpc32xx-pwm"); +MODULE_AUTHOR("Alexandre Pereira da Silva <aletes.xgr@gmail.com>"); +MODULE_DESCRIPTION("LPC32XX PWM Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c new file mode 100644 index 000000000000..e5852646f082 --- /dev/null +++ b/drivers/pwm/pwm-mxs.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/stmp_device.h> + +#define SET 0x4 +#define CLR 0x8 +#define TOG 0xc + +#define PWM_CTRL 0x0 +#define PWM_ACTIVE0 0x10 +#define PWM_PERIOD0 0x20 +#define PERIOD_PERIOD(p) ((p) & 0xffff) +#define PERIOD_PERIOD_MAX 0x10000 +#define PERIOD_ACTIVE_HIGH (3 << 16) +#define PERIOD_INACTIVE_LOW (2 << 18) +#define PERIOD_CDIV(div) (((div) & 0x7) << 20) +#define PERIOD_CDIV_MAX 8 + +struct mxs_pwm_chip { + struct pwm_chip chip; + struct device *dev; + struct clk *clk; + void __iomem *base; +}; + +#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip) + +static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip); + int ret, div = 0; + unsigned int period_cycles, duty_cycles; + unsigned long rate; + unsigned long long c; + + rate = clk_get_rate(mxs->clk); + while (1) { + c = rate / (1 << div); + c = c * period_ns; + do_div(c, 1000000000); + if (c < PERIOD_PERIOD_MAX) + break; + div++; + if (div > PERIOD_CDIV_MAX) + return -EINVAL; + } + + period_cycles = c; + c *= duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + /* + * If the PWM channel is disabled, make sure to turn on the clock + * before writing the register. Otherwise, keep it enabled. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + ret = clk_prepare_enable(mxs->clk); + if (ret) + return ret; + } + + writel(duty_cycles << 16, + mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20); + writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH | + PERIOD_INACTIVE_LOW | PERIOD_CDIV(div), + mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20); + + /* + * If the PWM is not enabled, turn the clock off again to save power. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + clk_disable_unprepare(mxs->clk); + + return 0; +} + +static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip); + int ret; + + ret = clk_prepare_enable(mxs->clk); + if (ret) + return ret; + + writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET); + + return 0; +} + +static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip); + + writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR); + + clk_disable_unprepare(mxs->clk); +} + +static const struct pwm_ops mxs_pwm_ops = { + .config = mxs_pwm_config, + .enable = mxs_pwm_enable, + .disable = mxs_pwm_disable, + .owner = THIS_MODULE, +}; + +static int mxs_pwm_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mxs_pwm_chip *mxs; + struct resource *res; + struct pinctrl *pinctrl; + int ret; + + mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL); + if (!mxs) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mxs->base = devm_request_and_ioremap(&pdev->dev, res); + if (!mxs->base) + return -EADDRNOTAVAIL; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + + mxs->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mxs->clk)) + return PTR_ERR(mxs->clk); + + mxs->chip.dev = &pdev->dev; + mxs->chip.ops = &mxs_pwm_ops; + mxs->chip.base = -1; + ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret); + return ret; + } + + ret = pwmchip_add(&mxs->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret); + return ret; + } + + mxs->dev = &pdev->dev; + platform_set_drvdata(pdev, mxs); + + stmp_reset_block(mxs->base); + + return 0; +} + +static int __devexit mxs_pwm_remove(struct platform_device *pdev) +{ + struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev); + + return pwmchip_remove(&mxs->chip); +} + +static struct of_device_id mxs_pwm_dt_ids[] = { + { .compatible = "fsl,imx23-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids); + +static struct platform_driver mxs_pwm_driver = { + .driver = { + .name = "mxs-pwm", + .of_match_table = of_match_ptr(mxs_pwm_dt_ids), + }, + .probe = mxs_pwm_probe, + .remove = __devexit_p(mxs_pwm_remove), +}; +module_platform_driver(mxs_pwm_driver); + +MODULE_ALIAS("platform:mxs-pwm"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Freescale MXS PWM Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c new file mode 100644 index 000000000000..bd5867a1c700 --- /dev/null +++ b/drivers/pwm/pwm-pxa.c @@ -0,0 +1,218 @@ +/* + * drivers/pwm/pwm-pxa.c + * + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 2008-02-13 initial version + * eric miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#include <asm/div64.h> + +#define HAS_SECONDARY_PWM 0x10 +#define PWM_ID_BASE(d) ((d) & 0xf) + +static const struct platform_device_id pwm_id_table[] = { + /* PWM has_secondary_pwm? */ + { "pxa25x-pwm", 0 }, + { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM }, + { "pxa168-pwm", 1 }, + { "pxa910-pwm", 1 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, pwm_id_table); + +/* PWM registers and bits definitions */ +#define PWMCR (0x00) +#define PWMDCR (0x04) +#define PWMPCR (0x08) + +#define PWMCR_SD (1 << 6) +#define PWMDCR_FD (1 << 10) + +struct pxa_pwm_chip { + struct pwm_chip chip; + struct device *dev; + + struct clk *clk; + int clk_enabled; + void __iomem *mmio_base; +}; + +static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct pxa_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + */ +static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + unsigned long offset; + int rc; + + if (period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + offset = pwm->hwpwm ? 0x10 : 0; + + c = clk_get_rate(pc->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + prescale = (period_cycles - 1) / 1024; + pv = period_cycles / (prescale + 1) - 1; + + if (prescale > 63) + return -EINVAL; + + if (duty_ns == period_ns) + dc = PWMDCR_FD; + else + dc = (pv + 1) * duty_ns / period_ns; + + /* NOTE: the clock to PWM has to be enabled first + * before writing to the registers + */ + rc = clk_prepare_enable(pc->clk); + if (rc < 0) + return rc; + + writel(prescale, pc->mmio_base + offset + PWMCR); + writel(dc, pc->mmio_base + offset + PWMDCR); + writel(pv, pc->mmio_base + offset + PWMPCR); + + clk_disable_unprepare(pc->clk); + return 0; +} + +static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); + int rc = 0; + + if (!pc->clk_enabled) { + rc = clk_prepare_enable(pc->clk); + if (!rc) + pc->clk_enabled++; + } + return rc; +} + +static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); + + if (pc->clk_enabled) { + clk_disable_unprepare(pc->clk); + pc->clk_enabled--; + } +} + +static struct pwm_ops pxa_pwm_ops = { + .config = pxa_pwm_config, + .enable = pxa_pwm_enable, + .disable = pxa_pwm_disable, + .owner = THIS_MODULE, +}; + +static int __devinit pwm_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct pxa_pwm_chip *pwm; + struct resource *r; + int ret = 0; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (pwm == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pwm->clk)) + return PTR_ERR(pwm->clk); + + pwm->clk_enabled = 0; + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &pxa_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (pwm->mmio_base == NULL) + return -EADDRNOTAVAIL; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, pwm); + return 0; +} + +static int __devexit pwm_remove(struct platform_device *pdev) +{ + struct pxa_pwm_chip *chip; + + chip = platform_get_drvdata(pdev); + if (chip == NULL) + return -ENODEV; + + return pwmchip_remove(&chip->chip); +} + +static struct platform_driver pwm_driver = { + .driver = { + .name = "pxa25x-pwm", + .owner = THIS_MODULE, + }, + .probe = pwm_probe, + .remove = __devexit_p(pwm_remove), + .id_table = pwm_id_table, +}; + +static int __init pwm_init(void) +{ + return platform_driver_register(&pwm_driver); +} +arch_initcall(pwm_init); + +static void __exit pwm_exit(void) +{ + platform_driver_unregister(&pwm_driver); +} +module_exit(pwm_exit); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c new file mode 100644 index 000000000000..d10386528c9c --- /dev/null +++ b/drivers/pwm/pwm-samsung.c @@ -0,0 +1,356 @@ +/* drivers/pwm/pwm-samsung.c + * + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * + * S3C series PWM device core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#define pr_fmt(fmt) "pwm-samsung: " fmt + +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#include <mach/map.h> + +#include <plat/regs-timer.h> + +struct s3c_chip { + struct platform_device *pdev; + + struct clk *clk_div; + struct clk *clk; + const char *label; + + unsigned int period_ns; + unsigned int duty_ns; + + unsigned char tcon_base; + unsigned char pwm_id; + struct pwm_chip chip; +}; + +#define to_s3c_chip(chip) container_of(chip, struct s3c_chip, chip) + +#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) + +static struct clk *clk_scaler[2]; + +static inline int pwm_is_tdiv(struct s3c_chip *chip) +{ + return clk_get_parent(chip->clk) == chip->clk_div; +} + +#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0)) +#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2)) +#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3)) +#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1)) + +static int s3c_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct s3c_chip *s3c = to_s3c_chip(chip); + unsigned long flags; + unsigned long tcon; + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_start(s3c); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + return 0; +} + +static void s3c_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct s3c_chip *s3c = to_s3c_chip(chip); + unsigned long flags; + unsigned long tcon; + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon &= ~pwm_tcon_start(s3c); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); +} + +static unsigned long pwm_calc_tin(struct s3c_chip *s3c, unsigned long freq) +{ + unsigned long tin_parent_rate; + unsigned int div; + + tin_parent_rate = clk_get_rate(clk_get_parent(s3c->clk_div)); + pwm_dbg(s3c, "tin parent at %lu\n", tin_parent_rate); + + for (div = 2; div <= 16; div *= 2) { + if ((tin_parent_rate / (div << 16)) < freq) + return tin_parent_rate / div; + } + + return tin_parent_rate / 16; +} + +#define NS_IN_HZ (1000000000UL) + +static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct s3c_chip *s3c = to_s3c_chip(chip); + unsigned long tin_rate; + unsigned long tin_ns; + unsigned long period; + unsigned long flags; + unsigned long tcon; + unsigned long tcnt; + long tcmp; + + /* We currently avoid using 64bit arithmetic by using the + * fact that anything faster than 1Hz is easily representable + * by 32bits. */ + + if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) + return -ERANGE; + + if (duty_ns > period_ns) + return -EINVAL; + + if (period_ns == s3c->period_ns && + duty_ns == s3c->duty_ns) + return 0; + + /* The TCMP and TCNT can be read without a lock, they're not + * shared between the timers. */ + + tcmp = __raw_readl(S3C2410_TCMPB(s3c->pwm_id)); + tcnt = __raw_readl(S3C2410_TCNTB(s3c->pwm_id)); + + period = NS_IN_HZ / period_ns; + + pwm_dbg(s3c, "duty_ns=%d, period_ns=%d (%lu)\n", + duty_ns, period_ns, period); + + /* Check to see if we are changing the clock rate of the PWM */ + + if (s3c->period_ns != period_ns) { + if (pwm_is_tdiv(s3c)) { + tin_rate = pwm_calc_tin(s3c, period); + clk_set_rate(s3c->clk_div, tin_rate); + } else + tin_rate = clk_get_rate(s3c->clk); + + s3c->period_ns = period_ns; + + pwm_dbg(s3c, "tin_rate=%lu\n", tin_rate); + + tin_ns = NS_IN_HZ / tin_rate; + tcnt = period_ns / tin_ns; + } else + tin_ns = NS_IN_HZ / clk_get_rate(s3c->clk); + + /* Note, counters count down */ + + tcmp = duty_ns / tin_ns; + tcmp = tcnt - tcmp; + /* the pwm hw only checks the compare register after a decrement, + so the pin never toggles if tcmp = tcnt */ + if (tcmp == tcnt) + tcmp--; + + pwm_dbg(s3c, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); + + if (tcmp < 0) + tcmp = 0; + + /* Update the PWM register block. */ + + local_irq_save(flags); + + __raw_writel(tcmp, S3C2410_TCMPB(s3c->pwm_id)); + __raw_writel(tcnt, S3C2410_TCNTB(s3c->pwm_id)); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_manulupdate(s3c); + tcon |= pwm_tcon_autoreload(s3c); + __raw_writel(tcon, S3C2410_TCON); + + tcon &= ~pwm_tcon_manulupdate(s3c); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + return 0; +} + +static struct pwm_ops s3c_pwm_ops = { + .enable = s3c_pwm_enable, + .disable = s3c_pwm_disable, + .config = s3c_pwm_config, + .owner = THIS_MODULE, +}; + +static int s3c_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct s3c_chip *s3c; + unsigned long flags; + unsigned long tcon; + unsigned int id = pdev->id; + int ret; + + if (id == 4) { + dev_err(dev, "TIMER4 is currently not supported\n"); + return -ENXIO; + } + + s3c = devm_kzalloc(&pdev->dev, sizeof(*s3c), GFP_KERNEL); + if (s3c == NULL) { + dev_err(dev, "failed to allocate pwm_device\n"); + return -ENOMEM; + } + + /* calculate base of control bits in TCON */ + s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4; + s3c->chip.ops = &s3c_pwm_ops; + s3c->chip.base = -1; + s3c->chip.npwm = 1; + + s3c->clk = devm_clk_get(dev, "pwm-tin"); + if (IS_ERR(s3c->clk)) { + dev_err(dev, "failed to get pwm tin clk\n"); + return PTR_ERR(s3c->clk); + } + + s3c->clk_div = devm_clk_get(dev, "pwm-tdiv"); + if (IS_ERR(s3c->clk_div)) { + dev_err(dev, "failed to get pwm tdiv clk\n"); + return PTR_ERR(s3c->clk_div); + } + + clk_enable(s3c->clk); + clk_enable(s3c->clk_div); + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_invert(s3c); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + ret = pwmchip_add(&s3c->chip); + if (ret < 0) { + dev_err(dev, "failed to register pwm\n"); + goto err_clk_tdiv; + } + + pwm_dbg(s3c, "config bits %02x\n", + (__raw_readl(S3C2410_TCON) >> s3c->tcon_base) & 0x0f); + + dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n", + clk_get_rate(s3c->clk), + clk_get_rate(s3c->clk_div), + pwm_is_tdiv(s3c) ? "div" : "ext", s3c->tcon_base); + + platform_set_drvdata(pdev, s3c); + return 0; + + err_clk_tdiv: + clk_disable(s3c->clk_div); + clk_disable(s3c->clk); + return ret; +} + +static int __devexit s3c_pwm_remove(struct platform_device *pdev) +{ + struct s3c_chip *s3c = platform_get_drvdata(pdev); + int err; + + err = pwmchip_remove(&s3c->chip); + if (err < 0) + return err; + + clk_disable(s3c->clk_div); + clk_disable(s3c->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct s3c_chip *s3c = platform_get_drvdata(pdev); + + /* No one preserve these values during suspend so reset them + * Otherwise driver leaves PWM unconfigured if same values + * passed to pwm_config + */ + s3c->period_ns = 0; + s3c->duty_ns = 0; + + return 0; +} + +static int s3c_pwm_resume(struct platform_device *pdev) +{ + struct s3c_chip *s3c = platform_get_drvdata(pdev); + unsigned long tcon; + + /* Restore invertion */ + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_invert(s3c); + __raw_writel(tcon, S3C2410_TCON); + + return 0; +} + +#else +#define s3c_pwm_suspend NULL +#define s3c_pwm_resume NULL +#endif + +static struct platform_driver s3c_pwm_driver = { + .driver = { + .name = "s3c24xx-pwm", + .owner = THIS_MODULE, + }, + .probe = s3c_pwm_probe, + .remove = __devexit_p(s3c_pwm_remove), + .suspend = s3c_pwm_suspend, + .resume = s3c_pwm_resume, +}; + +static int __init pwm_init(void) +{ + int ret; + + clk_scaler[0] = clk_get(NULL, "pwm-scaler0"); + clk_scaler[1] = clk_get(NULL, "pwm-scaler1"); + + if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) { + pr_err("failed to get scaler clocks\n"); + return -EINVAL; + } + + ret = platform_driver_register(&s3c_pwm_driver); + if (ret) + pr_err("failed to add pwm driver\n"); + + return ret; +} + +arch_initcall(pwm_init); diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c new file mode 100644 index 000000000000..02ce18d5e49a --- /dev/null +++ b/drivers/pwm/pwm-tegra.c @@ -0,0 +1,261 @@ +/* + * drivers/pwm/pwm-tegra.c + * + * Tegra pulse-width-modulation controller driver + * + * Copyright (c) 2010, NVIDIA Corporation. + * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pwm.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define PWM_ENABLE (1 << 31) +#define PWM_DUTY_WIDTH 8 +#define PWM_DUTY_SHIFT 16 +#define PWM_SCALE_WIDTH 13 +#define PWM_SCALE_SHIFT 0 + +#define NUM_PWM 4 + +struct tegra_pwm_chip { + struct pwm_chip chip; + struct device *dev; + + struct clk *clk; + + void __iomem *mmio_base; +}; + +static inline struct tegra_pwm_chip *to_tegra_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct tegra_pwm_chip, chip); +} + +static inline u32 pwm_readl(struct tegra_pwm_chip *chip, unsigned int num) +{ + return readl(chip->mmio_base + (num << 4)); +} + +static inline void pwm_writel(struct tegra_pwm_chip *chip, unsigned int num, + unsigned long val) +{ + writel(val, chip->mmio_base + (num << 4)); +} + +static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); + unsigned long long c; + unsigned long rate, hz; + u32 val = 0; + int err; + + /* + * Convert from duty_ns / period_ns to a fixed number of duty ticks + * per (1 << PWM_DUTY_WIDTH) cycles and make sure to round to the + * nearest integer during division. + */ + c = duty_ns * ((1 << PWM_DUTY_WIDTH) - 1) + period_ns / 2; + do_div(c, period_ns); + + val = (u32)c << PWM_DUTY_SHIFT; + + /* + * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH) + * cycles at the PWM clock rate will take period_ns nanoseconds. + */ + rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH; + hz = 1000000000ul / period_ns; + + rate = (rate + (hz / 2)) / hz; + + /* + * Since the actual PWM divider is the register's frequency divider + * field minus 1, we need to decrement to get the correct value to + * write to the register. + */ + if (rate > 0) + rate--; + + /* + * Make sure that the rate will fit in the register's frequency + * divider field. + */ + if (rate >> PWM_SCALE_WIDTH) + return -EINVAL; + + val |= rate << PWM_SCALE_SHIFT; + + /* + * If the PWM channel is disabled, make sure to turn on the clock + * before writing the register. Otherwise, keep it enabled. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + err = clk_prepare_enable(pc->clk); + if (err < 0) + return err; + } else + val |= PWM_ENABLE; + + pwm_writel(pc, pwm->hwpwm, val); + + /* + * If the PWM is not enabled, turn the clock off again to save power. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + clk_disable_unprepare(pc->clk); + + return 0; +} + +static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); + int rc = 0; + u32 val; + + rc = clk_prepare_enable(pc->clk); + if (rc < 0) + return rc; + + val = pwm_readl(pc, pwm->hwpwm); + val |= PWM_ENABLE; + pwm_writel(pc, pwm->hwpwm, val); + + return 0; +} + +static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); + u32 val; + + val = pwm_readl(pc, pwm->hwpwm); + val &= ~PWM_ENABLE; + pwm_writel(pc, pwm->hwpwm, val); + + clk_disable_unprepare(pc->clk); +} + +static const struct pwm_ops tegra_pwm_ops = { + .config = tegra_pwm_config, + .enable = tegra_pwm_enable, + .disable = tegra_pwm_disable, + .owner = THIS_MODULE, +}; + +static int tegra_pwm_probe(struct platform_device *pdev) +{ + struct tegra_pwm_chip *pwm; + struct resource *r; + int ret; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + pwm->dev = &pdev->dev; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resources defined\n"); + return -ENODEV; + } + + pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (!pwm->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() region\n"); + return -EADDRNOTAVAIL; + } + + platform_set_drvdata(pdev, pwm); + + pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pwm->clk)) + return PTR_ERR(pwm->clk); + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &tegra_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = NUM_PWM; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int __devexit tegra_pwm_remove(struct platform_device *pdev) +{ + struct tegra_pwm_chip *pc = platform_get_drvdata(pdev); + int i; + + if (WARN_ON(!pc)) + return -ENODEV; + + for (i = 0; i < NUM_PWM; i++) { + struct pwm_device *pwm = &pc->chip.pwms[i]; + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + if (clk_prepare_enable(pc->clk) < 0) + continue; + + pwm_writel(pc, i, 0); + + clk_disable_unprepare(pc->clk); + } + + return pwmchip_remove(&pc->chip); +} + +#ifdef CONFIG_OF +static struct of_device_id tegra_pwm_of_match[] = { + { .compatible = "nvidia,tegra20-pwm" }, + { .compatible = "nvidia,tegra30-pwm" }, + { } +}; + +MODULE_DEVICE_TABLE(of, tegra_pwm_of_match); +#endif + +static struct platform_driver tegra_pwm_driver = { + .driver = { + .name = "tegra-pwm", + .of_match_table = of_match_ptr(tegra_pwm_of_match), + }, + .probe = tegra_pwm_probe, + .remove = __devexit_p(tegra_pwm_remove), +}; + +module_platform_driver(tegra_pwm_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("NVIDIA Corporation"); +MODULE_ALIAS("platform:tegra-pwm"); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c new file mode 100644 index 000000000000..3c2ad284ee3e --- /dev/null +++ b/drivers/pwm/pwm-tiecap.c @@ -0,0 +1,232 @@ +/* + * ECAP PWM driver + * + * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> +#include <linux/pwm.h> + +/* ECAP registers and bits definitions */ +#define CAP1 0x08 +#define CAP2 0x0C +#define CAP3 0x10 +#define CAP4 0x14 +#define ECCTL2 0x2A +#define ECCTL2_APWM_MODE BIT(9) +#define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6)) +#define ECCTL2_TSCTR_FREERUN BIT(4) + +struct ecap_pwm_chip { + struct pwm_chip chip; + unsigned int clk_rate; + void __iomem *mmio_base; +}; + +static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ecap_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * period_cycles / PWM_CLK_RATE + * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE + */ +static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles; + unsigned int reg_val; + + if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) + return -ERANGE; + + c = pc->clk_rate; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + period_cycles = (unsigned long)c; + + if (period_cycles < 1) { + period_cycles = 1; + duty_cycles = 1; + } else { + c = pc->clk_rate; + c = c * duty_ns; + do_div(c, NSEC_PER_SEC); + duty_cycles = (unsigned long)c; + } + + pm_runtime_get_sync(pc->chip.dev); + + reg_val = readw(pc->mmio_base + ECCTL2); + + /* Configure APWM mode & disable sync option */ + reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA; + + writew(reg_val, pc->mmio_base + ECCTL2); + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + /* Update active registers if not running */ + writel(duty_cycles, pc->mmio_base + CAP2); + writel(period_cycles, pc->mmio_base + CAP1); + } else { + /* + * Update shadow registers to configure period and + * compare values. This helps current PWM period to + * complete on reconfiguring + */ + writel(duty_cycles, pc->mmio_base + CAP4); + writel(period_cycles, pc->mmio_base + CAP3); + } + + pm_runtime_put_sync(pc->chip.dev); + return 0; +} + +static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned int reg_val; + + /* Leave clock enabled on enabling PWM */ + pm_runtime_get_sync(pc->chip.dev); + + /* + * Enable 'Free run Time stamp counter mode' to start counter + * and 'APWM mode' to enable APWM output + */ + reg_val = readw(pc->mmio_base + ECCTL2); + reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + return 0; +} + +static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned int reg_val; + + /* + * Disable 'Free run Time stamp counter mode' to stop counter + * and 'APWM mode' to put APWM output to low + */ + reg_val = readw(pc->mmio_base + ECCTL2); + reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE); + writew(reg_val, pc->mmio_base + ECCTL2); + + /* Disable clock on PWM disable */ + pm_runtime_put_sync(pc->chip.dev); +} + +static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + dev_warn(chip->dev, "Removing PWM device without disabling\n"); + pm_runtime_put_sync(chip->dev); + } +} + +static const struct pwm_ops ecap_pwm_ops = { + .free = ecap_pwm_free, + .config = ecap_pwm_config, + .enable = ecap_pwm_enable, + .disable = ecap_pwm_disable, + .owner = THIS_MODULE, +}; + +static int __devinit ecap_pwm_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct clk *clk; + struct ecap_pwm_chip *pc; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + pc->clk_rate = clk_get_rate(clk); + if (!pc->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &ecap_pwm_ops; + pc->chip.base = -1; + pc->chip.npwm = 1; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (!pc->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + return -EADDRNOTAVAIL; + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + pm_runtime_enable(&pdev->dev); + platform_set_drvdata(pdev, pc); + return 0; +} + +static int __devexit ecap_pwm_remove(struct platform_device *pdev) +{ + struct ecap_pwm_chip *pc = platform_get_drvdata(pdev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return pwmchip_remove(&pc->chip); +} + +static struct platform_driver ecap_pwm_driver = { + .driver = { + .name = "ecap", + }, + .probe = ecap_pwm_probe, + .remove = __devexit_p(ecap_pwm_remove), +}; + +module_platform_driver(ecap_pwm_driver); + +MODULE_DESCRIPTION("ECAP PWM driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c new file mode 100644 index 000000000000..010d232cb0c8 --- /dev/null +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -0,0 +1,411 @@ +/* + * EHRPWM PWM driver + * + * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> + +/* EHRPWM registers and bits definitions */ + +/* Time base module registers */ +#define TBCTL 0x00 +#define TBPRD 0x0A + +#define TBCTL_RUN_MASK (BIT(15) | BIT(14)) +#define TBCTL_STOP_NEXT 0 +#define TBCTL_STOP_ON_CYCLE BIT(14) +#define TBCTL_FREE_RUN (BIT(15) | BIT(14)) +#define TBCTL_PRDLD_MASK BIT(3) +#define TBCTL_PRDLD_SHDW 0 +#define TBCTL_PRDLD_IMDT BIT(3) +#define TBCTL_CLKDIV_MASK (BIT(12) | BIT(11) | BIT(10) | BIT(9) | \ + BIT(8) | BIT(7)) +#define TBCTL_CTRMODE_MASK (BIT(1) | BIT(0)) +#define TBCTL_CTRMODE_UP 0 +#define TBCTL_CTRMODE_DOWN BIT(0) +#define TBCTL_CTRMODE_UPDOWN BIT(1) +#define TBCTL_CTRMODE_FREEZE (BIT(1) | BIT(0)) + +#define TBCTL_HSPCLKDIV_SHIFT 7 +#define TBCTL_CLKDIV_SHIFT 10 + +#define CLKDIV_MAX 7 +#define HSPCLKDIV_MAX 7 +#define PERIOD_MAX 0xFFFF + +/* compare module registers */ +#define CMPA 0x12 +#define CMPB 0x14 + +/* Action qualifier module registers */ +#define AQCTLA 0x16 +#define AQCTLB 0x18 +#define AQSFRC 0x1A +#define AQCSFRC 0x1C + +#define AQCTL_CBU_MASK (BIT(9) | BIT(8)) +#define AQCTL_CBU_FRCLOW BIT(8) +#define AQCTL_CBU_FRCHIGH BIT(9) +#define AQCTL_CBU_FRCTOGGLE (BIT(9) | BIT(8)) +#define AQCTL_CAU_MASK (BIT(5) | BIT(4)) +#define AQCTL_CAU_FRCLOW BIT(4) +#define AQCTL_CAU_FRCHIGH BIT(5) +#define AQCTL_CAU_FRCTOGGLE (BIT(5) | BIT(4)) +#define AQCTL_PRD_MASK (BIT(3) | BIT(2)) +#define AQCTL_PRD_FRCLOW BIT(2) +#define AQCTL_PRD_FRCHIGH BIT(3) +#define AQCTL_PRD_FRCTOGGLE (BIT(3) | BIT(2)) +#define AQCTL_ZRO_MASK (BIT(1) | BIT(0)) +#define AQCTL_ZRO_FRCLOW BIT(0) +#define AQCTL_ZRO_FRCHIGH BIT(1) +#define AQCTL_ZRO_FRCTOGGLE (BIT(1) | BIT(0)) + +#define AQSFRC_RLDCSF_MASK (BIT(7) | BIT(6)) +#define AQSFRC_RLDCSF_ZRO 0 +#define AQSFRC_RLDCSF_PRD BIT(6) +#define AQSFRC_RLDCSF_ZROPRD BIT(7) +#define AQSFRC_RLDCSF_IMDT (BIT(7) | BIT(6)) + +#define AQCSFRC_CSFB_MASK (BIT(3) | BIT(2)) +#define AQCSFRC_CSFB_FRCDIS 0 +#define AQCSFRC_CSFB_FRCLOW BIT(2) +#define AQCSFRC_CSFB_FRCHIGH BIT(3) +#define AQCSFRC_CSFB_DISSWFRC (BIT(3) | BIT(2)) +#define AQCSFRC_CSFA_MASK (BIT(1) | BIT(0)) +#define AQCSFRC_CSFA_FRCDIS 0 +#define AQCSFRC_CSFA_FRCLOW BIT(0) +#define AQCSFRC_CSFA_FRCHIGH BIT(1) +#define AQCSFRC_CSFA_DISSWFRC (BIT(1) | BIT(0)) + +#define NUM_PWM_CHANNEL 2 /* EHRPWM channels */ + +struct ehrpwm_pwm_chip { + struct pwm_chip chip; + unsigned int clk_rate; + void __iomem *mmio_base; +}; + +static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ehrpwm_pwm_chip, chip); +} + +static void ehrpwm_write(void *base, int offset, unsigned int val) +{ + writew(val & 0xFFFF, base + offset); +} + +static void ehrpwm_modify(void *base, int offset, + unsigned short mask, unsigned short val) +{ + unsigned short regval; + + regval = readw(base + offset); + regval &= ~mask; + regval |= val & mask; + writew(regval, base + offset); +} + +/** + * set_prescale_div - Set up the prescaler divider function + * @rqst_prescaler: prescaler value min + * @prescale_div: prescaler value set + * @tb_clk_div: Time Base Control prescaler bits + */ +static int set_prescale_div(unsigned long rqst_prescaler, + unsigned short *prescale_div, unsigned short *tb_clk_div) +{ + unsigned int clkdiv, hspclkdiv; + + for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) { + for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) { + + /* + * calculations for prescaler value : + * prescale_div = HSPCLKDIVIDER * CLKDIVIDER. + * HSPCLKDIVIDER = 2 ** hspclkdiv + * CLKDIVIDER = (1), if clkdiv == 0 *OR* + * (2 * clkdiv), if clkdiv != 0 + * + * Configure prescale_div value such that period + * register value is less than 65535. + */ + + *prescale_div = (1 << clkdiv) * + (hspclkdiv ? (hspclkdiv * 2) : 1); + if (*prescale_div > rqst_prescaler) { + *tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) | + (hspclkdiv << TBCTL_HSPCLKDIV_SHIFT); + return 0; + } + } + } + return 1; +} + +static void configure_chans(struct ehrpwm_pwm_chip *pc, int chan, + unsigned long duty_cycles) +{ + int cmp_reg, aqctl_reg; + unsigned short aqctl_val, aqctl_mask; + + /* + * Channels can be configured from action qualifier module. + * Channel 0 configured with compare A register and for + * up-counter mode. + * Channel 1 configured with compare B register and for + * up-counter mode. + */ + if (chan == 1) { + aqctl_reg = AQCTLB; + cmp_reg = CMPB; + /* Configure PWM Low from compare B value */ + aqctl_val = AQCTL_CBU_FRCLOW; + aqctl_mask = AQCTL_CBU_MASK; + } else { + cmp_reg = CMPA; + aqctl_reg = AQCTLA; + /* Configure PWM Low from compare A value*/ + aqctl_val = AQCTL_CAU_FRCLOW; + aqctl_mask = AQCTL_CAU_MASK; + } + + /* Configure PWM High from period value and zero value */ + aqctl_val |= AQCTL_PRD_FRCHIGH | AQCTL_ZRO_FRCHIGH; + aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK; + ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val); + + ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles); +} + +/* + * period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE + * duty_ns = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE + */ +static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles; + unsigned short ps_divval, tb_divval; + + if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) + return -ERANGE; + + c = pc->clk_rate; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + period_cycles = (unsigned long)c; + + if (period_cycles < 1) { + period_cycles = 1; + duty_cycles = 1; + } else { + c = pc->clk_rate; + c = c * duty_ns; + do_div(c, NSEC_PER_SEC); + duty_cycles = (unsigned long)c; + } + + /* Configure clock prescaler to support Low frequency PWM wave */ + if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval, + &tb_divval)) { + dev_err(chip->dev, "Unsupported values\n"); + return -EINVAL; + } + + pm_runtime_get_sync(chip->dev); + + /* Update clock prescaler values */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval); + + /* Update period & duty cycle with presacler division */ + period_cycles = period_cycles / ps_divval; + duty_cycles = duty_cycles / ps_divval; + + /* Configure shadow loading on Period register */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW); + + ehrpwm_write(pc->mmio_base, TBPRD, period_cycles); + + /* Configure ehrpwm counter for up-count mode */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK, + TBCTL_CTRMODE_UP); + + /* Configure the channel for duty cycle */ + configure_chans(pc, pwm->hwpwm, duty_cycles); + pm_runtime_put_sync(chip->dev); + return 0; +} + +static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + unsigned short aqcsfrc_val, aqcsfrc_mask; + + /* Leave clock enabled on enabling PWM */ + pm_runtime_get_sync(chip->dev); + + /* Disabling Action Qualifier on PWM output */ + if (pwm->hwpwm) { + aqcsfrc_val = AQCSFRC_CSFB_FRCDIS; + aqcsfrc_mask = AQCSFRC_CSFB_MASK; + } else { + aqcsfrc_val = AQCSFRC_CSFA_FRCDIS; + aqcsfrc_mask = AQCSFRC_CSFA_MASK; + } + + /* Changes to shadow mode */ + ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK, + AQSFRC_RLDCSF_ZRO); + + ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val); + + /* Enable time counter for free_run */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN); + return 0; +} + +static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + unsigned short aqcsfrc_val, aqcsfrc_mask; + + /* Action Qualifier puts PWM output low forcefully */ + if (pwm->hwpwm) { + aqcsfrc_val = AQCSFRC_CSFB_FRCLOW; + aqcsfrc_mask = AQCSFRC_CSFB_MASK; + } else { + aqcsfrc_val = AQCSFRC_CSFA_FRCLOW; + aqcsfrc_mask = AQCSFRC_CSFA_MASK; + } + + /* + * Changes to immediate action on Action Qualifier. This puts + * Action Qualifier control on PWM output from next TBCLK + */ + ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK, + AQSFRC_RLDCSF_IMDT); + + ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val); + + /* Stop Time base counter */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT); + + /* Disable clock on PWM disable */ + pm_runtime_put_sync(chip->dev); +} + +static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + dev_warn(chip->dev, "Removing PWM device without disabling\n"); + pm_runtime_put_sync(chip->dev); + } +} + +static const struct pwm_ops ehrpwm_pwm_ops = { + .free = ehrpwm_pwm_free, + .config = ehrpwm_pwm_config, + .enable = ehrpwm_pwm_enable, + .disable = ehrpwm_pwm_disable, + .owner = THIS_MODULE, +}; + +static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct clk *clk; + struct ehrpwm_pwm_chip *pc; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + pc->clk_rate = clk_get_rate(clk); + if (!pc->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &ehrpwm_pwm_ops; + pc->chip.base = -1; + pc->chip.npwm = NUM_PWM_CHANNEL; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (!pc->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + return -EADDRNOTAVAIL; + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + pm_runtime_enable(&pdev->dev); + platform_set_drvdata(pdev, pc); + return 0; +} + +static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev) +{ + struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return pwmchip_remove(&pc->chip); +} + +static struct platform_driver ehrpwm_pwm_driver = { + .driver = { + .name = "ehrpwm", + }, + .probe = ehrpwm_pwm_probe, + .remove = __devexit_p(ehrpwm_pwm_remove), +}; + +module_platform_driver(ehrpwm_pwm_driver); + +MODULE_DESCRIPTION("EHRPWM PWM driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c new file mode 100644 index 000000000000..548021439f0c --- /dev/null +++ b/drivers/pwm/pwm-vt8500.c @@ -0,0 +1,177 @@ +/* + * drivers/pwm/pwm-vt8500.c + * + * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/pwm.h> +#include <linux/delay.h> + +#include <asm/div64.h> + +#define VT8500_NR_PWMS 4 + +struct vt8500_chip { + struct pwm_chip chip; + void __iomem *base; +}; + +#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip) + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) +static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) +{ + int loops = msecs_to_loops(10); + while ((readb(reg) & bitmask) && --loops) + cpu_relax(); + + if (unlikely(!loops)) + pr_warning("Waiting for status bits 0x%x to clear timed out\n", + bitmask); +} + +static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + + c = 25000000/2; /* wild guess --- need to implement clocks */ + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + prescale = (period_cycles - 1) / 4096; + pv = period_cycles / (prescale + 1) - 1; + if (pv > 4095) + pv = 4095; + + if (prescale > 1023) + return -EINVAL; + + c = (unsigned long long)pv * duty_ns; + do_div(c, period_ns); + dc = c; + + pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 1)); + writel(prescale, vt8500->base + 0x4 + (pwm->hwpwm << 4)); + + pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 2)); + writel(pv, vt8500->base + 0x8 + (pwm->hwpwm << 4)); + + pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 3)); + writel(dc, vt8500->base + 0xc + (pwm->hwpwm << 4)); + + return 0; +} + +static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + + pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0)); + writel(5, vt8500->base + (pwm->hwpwm << 4)); + return 0; +} + +static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + + pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0)); + writel(0, vt8500->base + (pwm->hwpwm << 4)); +} + +static struct pwm_ops vt8500_pwm_ops = { + .enable = vt8500_pwm_enable, + .disable = vt8500_pwm_disable, + .config = vt8500_pwm_config, + .owner = THIS_MODULE, +}; + +static int __devinit pwm_probe(struct platform_device *pdev) +{ + struct vt8500_chip *chip; + struct resource *r; + int ret; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + chip->chip.dev = &pdev->dev; + chip->chip.ops = &vt8500_pwm_ops; + chip->chip.base = -1; + chip->chip.npwm = VT8500_NR_PWMS; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + chip->base = devm_request_and_ioremap(&pdev->dev, r); + if (chip->base == NULL) + return -EADDRNOTAVAIL; + + ret = pwmchip_add(&chip->chip); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, chip); + return ret; +} + +static int __devexit pwm_remove(struct platform_device *pdev) +{ + struct vt8500_chip *chip; + + chip = platform_get_drvdata(pdev); + if (chip == NULL) + return -ENODEV; + + return pwmchip_remove(&chip->chip); +} + +static struct platform_driver pwm_driver = { + .driver = { + .name = "vt8500-pwm", + .owner = THIS_MODULE, + }, + .probe = pwm_probe, + .remove = __devexit_p(pwm_remove), +}; + +static int __init pwm_init(void) +{ + return platform_driver_register(&pwm_driver); +} +arch_initcall(pwm_init); + +static void __exit pwm_exit(void) +{ + platform_driver_unregister(&pwm_driver); +} +module_exit(pwm_exit); + +MODULE_LICENSE("GPL"); |