diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/nand/Kconfig | 1 | ||||
-rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 50 | ||||
-rw-r--r-- | drivers/mtd/ubi/eba.c | 3 |
3 files changed, 47 insertions, 7 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 5b76a173cd95..5897d8d8fa5a 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -526,6 +526,7 @@ config MTD_NAND_SUNXI config MTD_NAND_HISI504 tristate "Support for NAND controller on Hisilicon SoC Hip04" + depends on HAS_DMA help Enables support for NAND controller on Hisilicon SoC Hip04. diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 96b0b1d27df1..10b1f7a4fe50 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -480,6 +480,42 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) nand_writel(info, NDCR, ndcr | int_mask); } +static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len) +{ + if (info->ecc_bch) { + int timeout; + + /* + * According to the datasheet, when reading from NDDB + * with BCH enabled, after each 32 bytes reads, we + * have to make sure that the NDSR.RDDREQ bit is set. + * + * Drain the FIFO 8 32 bits reads at a time, and skip + * the polling on the last read. + */ + while (len > 8) { + __raw_readsl(info->mmio_base + NDDB, data, 8); + + for (timeout = 0; + !(nand_readl(info, NDSR) & NDSR_RDDREQ); + timeout++) { + if (timeout >= 5) { + dev_err(&info->pdev->dev, + "Timeout on RDDREQ while draining the FIFO\n"); + return; + } + + mdelay(1); + } + + data += 32; + len -= 8; + } + } + + __raw_readsl(info->mmio_base + NDDB, data, len); +} + static void handle_data_pio(struct pxa3xx_nand_info *info) { unsigned int do_bytes = min(info->data_size, info->chunk_size); @@ -496,14 +532,14 @@ static void handle_data_pio(struct pxa3xx_nand_info *info) DIV_ROUND_UP(info->oob_size, 4)); break; case STATE_PIO_READING: - __raw_readsl(info->mmio_base + NDDB, - info->data_buff + info->data_buff_pos, - DIV_ROUND_UP(do_bytes, 4)); + drain_fifo(info, + info->data_buff + info->data_buff_pos, + DIV_ROUND_UP(do_bytes, 4)); if (info->oob_size > 0) - __raw_readsl(info->mmio_base + NDDB, - info->oob_buff + info->oob_buff_pos, - DIV_ROUND_UP(info->oob_size, 4)); + drain_fifo(info, + info->oob_buff + info->oob_buff_pos, + DIV_ROUND_UP(info->oob_size, 4)); break; default: dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, @@ -1572,6 +1608,8 @@ static int alloc_nand_resource(struct platform_device *pdev) int ret, irq, cs; pdata = dev_get_platdata(&pdev->dev); + if (pdata->num_cs <= 0) + return -ENODEV; info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) + sizeof(*host)) * pdata->num_cs, GFP_KERNEL); if (!info) diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index da4c79259f67..16e34b37d134 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -425,9 +425,10 @@ retry: ubi_warn(ubi, "corrupted VID header at PEB %d, LEB %d:%d", pnum, vol_id, lnum); err = -EBADMSG; - } else + } else { err = -EINVAL; ubi_ro_mode(ubi); + } } goto out_free; } else if (err == UBI_IO_BITFLIPS) |