diff options
Diffstat (limited to 'drivers/media/i2c/cx25840/cx25840-firmware.c')
| -rw-r--r-- | drivers/media/i2c/cx25840/cx25840-firmware.c | 175 |
1 files changed, 175 insertions, 0 deletions
diff --git a/drivers/media/i2c/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c new file mode 100644 index 000000000000..b3169f94ece8 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-firmware.c @@ -0,0 +1,175 @@ +/* cx25840 firmware functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/firmware.h> +#include <media/v4l2-common.h> +#include <media/cx25840.h> + +#include "cx25840-core.h" + +/* + * Mike Isely <isely@pobox.com> - The FWSEND parameter controls the + * size of the firmware chunks sent down the I2C bus to the chip. + * Previously this had been set to 1024 but unfortunately some I2C + * implementations can't transfer data in such big gulps. + * Specifically, the pvrusb2 driver has a hard limit of around 60 + * bytes, due to the encapsulation there of I2C traffic into USB + * messages. So we have to significantly reduce this parameter. + */ +#define FWSEND 48 + +#define FWDEV(x) &((x)->dev) + +static char *firmware = ""; + +module_param(firmware, charp, 0444); + +MODULE_PARM_DESC(firmware, "Firmware image to load"); + +static void start_fw_load(struct i2c_client *client) +{ + /* DL_ADDR_LB=0 DL_ADDR_HB=0 */ + cx25840_write(client, 0x800, 0x00); + cx25840_write(client, 0x801, 0x00); + // DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1 + cx25840_write(client, 0x803, 0x0b); + /* AUTO_INC_DIS=1 */ + cx25840_write(client, 0x000, 0x20); +} + +static void end_fw_load(struct i2c_client *client) +{ + /* AUTO_INC_DIS=0 */ + cx25840_write(client, 0x000, 0x00); + /* DL_ENABLE=0 */ + cx25840_write(client, 0x803, 0x03); +} + +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw" +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw" +#define CX25840_FIRMWARE "v4l-cx25840.fw" + +static const char *get_fw_name(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (firmware[0]) + return firmware; + if (is_cx2388x(state)) + return CX2388x_FIRMWARE; + if (is_cx231xx(state)) + return CX231xx_FIRMWARE; + return CX25840_FIRMWARE; +} + +static int check_fw_load(struct i2c_client *client, int size) +{ + /* DL_ADDR_HB DL_ADDR_LB */ + int s = cx25840_read(client, 0x801) << 8; + s |= cx25840_read(client, 0x800); + + if (size != s) { + v4l_err(client, "firmware %s load failed\n", + get_fw_name(client)); + return -EINVAL; + } + + v4l_info(client, "loaded %s firmware (%d bytes)\n", + get_fw_name(client), size); + return 0; +} + +static int fw_write(struct i2c_client *client, const u8 *data, int size) +{ + if (i2c_master_send(client, data, size) < size) { + v4l_err(client, "firmware load i2c failure\n"); + return -ENOSYS; + } + + return 0; +} + +int cx25840_loadfw(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + const struct firmware *fw = NULL; + u8 buffer[FWSEND]; + const u8 *ptr; + const char *fwname = get_fw_name(client); + int size, retval; + int MAX_BUF_SIZE = FWSEND; + u32 gpio_oe = 0, gpio_da = 0; + + if (is_cx2388x(state)) { + /* Preserve the GPIO OE and output bits */ + gpio_oe = cx25840_read(client, 0x160); + gpio_da = cx25840_read(client, 0x164); + } + + if (is_cx231xx(state) && MAX_BUF_SIZE > 16) { + v4l_err(client, " Firmware download size changed to 16 bytes max length\n"); + MAX_BUF_SIZE = 16; /* cx231xx cannot accept more than 16 bytes at a time */ + } + + if (request_firmware(&fw, fwname, FWDEV(client)) != 0) { + v4l_err(client, "unable to open firmware %s\n", fwname); + return -EINVAL; + } + + start_fw_load(client); + + buffer[0] = 0x08; + buffer[1] = 0x02; + + size = fw->size; + ptr = fw->data; + while (size > 0) { + int len = min(MAX_BUF_SIZE - 2, size); + + memcpy(buffer + 2, ptr, len); + + retval = fw_write(client, buffer, len + 2); + + if (retval < 0) { + release_firmware(fw); + return retval; + } + + size -= len; + ptr += len; + } + + end_fw_load(client); + + size = fw->size; + release_firmware(fw); + + if (is_cx2388x(state)) { + /* Restore GPIO configuration after f/w load */ + cx25840_write(client, 0x160, gpio_oe); + cx25840_write(client, 0x164, gpio_da); + } + + return check_fw_load(client, size); +} + +MODULE_FIRMWARE(CX2388x_FIRMWARE); +MODULE_FIRMWARE(CX231xx_FIRMWARE); +MODULE_FIRMWARE(CX25840_FIRMWARE); + |