summaryrefslogtreecommitdiff
path: root/arch/sh/boards/renesas
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/renesas')
-rw-r--r--arch/sh/boards/renesas/ap325rxa/Makefile1
-rw-r--r--arch/sh/boards/renesas/ap325rxa/setup.c313
-rw-r--r--arch/sh/boards/renesas/migor/Kconfig15
-rw-r--r--arch/sh/boards/renesas/migor/Makefile1
-rw-r--r--arch/sh/boards/renesas/migor/lcd_qvga.c165
-rw-r--r--arch/sh/boards/renesas/migor/setup.c276
-rw-r--r--arch/sh/boards/renesas/rsk7203/Makefile1
-rw-r--r--arch/sh/boards/renesas/rsk7203/setup.c126
-rw-r--r--arch/sh/boards/renesas/sh7763rdp/Makefile1
-rw-r--r--arch/sh/boards/renesas/sh7763rdp/irq.c45
-rw-r--r--arch/sh/boards/renesas/sh7763rdp/setup.c128
-rw-r--r--arch/sh/boards/renesas/sh7785lcr/Makefile1
-rw-r--r--arch/sh/boards/renesas/sh7785lcr/setup.c302
13 files changed, 1370 insertions, 5 deletions
diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile
new file mode 100644
index 000000000000..f663768429f0
--- /dev/null
+++ b/arch/sh/boards/renesas/ap325rxa/Makefile
@@ -0,0 +1 @@
+obj-y := setup.o
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c
new file mode 100644
index 000000000000..7fa74462bd9f
--- /dev/null
+++ b/arch/sh/boards/renesas/ap325rxa/setup.c
@@ -0,0 +1,313 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+ .flags = SMC911X_USE_32BIT,
+ .irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+ [0] = {
+ .start = 0xb6080000,
+ .end = 0xb60fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device smc9118_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc9118_resources),
+ .resource = smc9118_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (1 * 1024 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (2 * 1024 * 1024),
+ }, {
+ .name = "other",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+ .width = 2,
+ .parts = ap325rxa_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x00ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = ap325rxa_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
+ .dev = {
+ .platform_data = &ap325rxa_nor_flash_data,
+ },
+};
+
+#define FPGA_LCDREG 0xB4100180
+#define FPGA_BKLREG 0xB4100212
+#define FPGA_LCDREG_VAL 0x0018
+#define PORT_PHCR 0xA405010E
+#define PORT_PLCR 0xA4050114
+#define PORT_PMCR 0xA4050116
+#define PORT_PRCR 0xA405011C
+#define PORT_PSCR 0xA405011E
+#define PORT_PZCR 0xA405014C
+#define PORT_HIZCRA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
+#define PORT_PSDR 0xA405013E
+#define PORT_PZDR 0xA405016C
+#define PORT_PSELD 0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+ msleep(100);
+
+ /* ASD AP-320/325 LCD ON */
+ ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+ /* backlight */
+ ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+ ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+ ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .clock_source = LCDC_CLK_EXTERNAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB18,
+ .clock_divider = 1,
+ .lcd_cfg = {
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 40,
+ .right_margin = 160,
+ .hsync_len = 8,
+ .upper_margin = 63,
+ .lower_margin = 80,
+ .vsync_len = 1,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+ .board_cfg = {
+ .display_on = ap320_wvga_power_on,
+ },
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe941fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ },
+};
+
+static unsigned char camera_ncm03j_magic[] =
+{
+ 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+ 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+ 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+ 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+ 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+ 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+ 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+ 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+ 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+ 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+ 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+ 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+ 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+ 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+ 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+ 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+ int enable)
+{
+ struct i2c_adapter *a = i2c_get_adapter(0);
+ struct i2c_msg msg;
+ int ret = 0;
+ int i;
+
+ if (!enable)
+ return 0; /* no disable for now */
+
+ for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+ u_int8_t buf[8];
+
+ msg.addr = 0x6e;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+
+ buf[0] = camera_ncm03j_magic[i];
+ buf[1] = camera_ncm03j_magic[i + 1];
+
+ ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+ }
+
+ return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+ .iface = 0,
+ .format_name = "UYVY",
+ .format_depth = 16,
+ .format = {
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ .colorspace = V4L2_COLORSPACE_SMPTE170M,
+ .width = 640,
+ .height = 480,
+ },
+ .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+ .set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+ .name = "soc_camera_platform",
+ .dev = {
+ .platform_data = &camera_info,
+ },
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu_device = {
+ .name = "sh_mobile_ceu",
+ .num_resources = ARRAY_SIZE(ceu_resources),
+ .resource = ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+ &smc9118_device,
+ &ap325rxa_nor_flash_device,
+ &lcdc_device,
+ &ceu_device,
+ &camera_device,
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+ clk_always_enable("mstp200"); /* LCDC */
+ clk_always_enable("mstp203"); /* CEU */
+
+ platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+ i2c_register_board_info(0, ap325rxa_i2c_devices,
+ ARRAY_SIZE(ap325rxa_i2c_devices));
+
+ return platform_add_devices(ap325rxa_devices,
+ ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+ /* LCDC configuration */
+ ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+ ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+ ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+ ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+ /* CEU */
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+ ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+ ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+ .mv_name = "AP-325RXA",
+ .mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig
new file mode 100644
index 000000000000..a7b3b728ec3c
--- /dev/null
+++ b/arch/sh/boards/renesas/migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+ prompt "Migo-R LCD Panel Board Selection"
+ default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+ bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+ bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
index 77037567633b..5f231dd25c0e 100644
--- a/arch/sh/boards/renesas/migor/Makefile
+++ b/arch/sh/boards/renesas/migor/Makefile
@@ -1 +1,2 @@
obj-y := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c
new file mode 100644
index 000000000000..6e9609596448
--- /dev/null
+++ b/arch/sh/boards/renesas/migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+ ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+ mdelay(2);
+ ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+ mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+ unsigned long tmp1, tmp2;
+
+ tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+ tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+ return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg, unsigned short data)
+{
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg, unsigned short data)
+{
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+ sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg)
+{
+ unsigned long data;
+
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+ data = sys_ops->read_data(sys_ops_handle);
+ return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short const *data, int no_data)
+{
+ int i;
+
+ for (i = 0; i < no_data; i += 2)
+ write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+ 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+ 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+ 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+ 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+ 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+ 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+ 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+ 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+ 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+ 0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+ 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+ 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ unsigned long xres = 320;
+ unsigned long yres = 240;
+ int k;
+
+ reset_lcd_module();
+ migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+ if (read_reg16(sohandle, so, 0) != 0x1505)
+ return -ENODEV;
+
+ pr_info("Migo-R QVGA LCD Module detected.\n");
+
+ migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+ write_reg16(sohandle, so, 0x00A4, 0x0001);
+ mdelay(10);
+
+ migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+ mdelay(100);
+
+ migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+ write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+ write_reg16(sohandle, so, 0x0051, 0x00ef);
+ write_reg16(sohandle, so, 0x0052, 0x0000);
+ write_reg16(sohandle, so, 0x0053, xres - 1);
+
+ migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+ mdelay(10);
+
+ migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+ mdelay(40);
+
+ /* clear GRAM to avoid displaying garbage */
+
+ write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+ write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+ for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+ write_reg16(sohandle, so, 0x0022, 0x0000);
+
+ write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+ write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+ write_reg16(sohandle, so, 0x0007, 0x0173);
+ mdelay(40);
+
+ /* enable display */
+ write_reg(sohandle, so, 0x00, 0x22);
+ mdelay(100);
+ return 0;
+}
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 963c99322095..7bd365ad2d06 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -15,9 +15,15 @@
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
#include <asm/migor.h>
/* Address IRQ Size Bus Description
@@ -198,14 +204,237 @@ static struct platform_device migor_nand_flash_device = {
}
};
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB16,
+ .clock_divider = 2,
+ .lcd_cfg = {
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 64,
+ .right_margin = 16,
+ .hsync_len = 120,
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ .sync = 0,
+ },
+ }
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+ .clock_source = LCDC_CLK_PERIPHERAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = SYS16A,
+ .clock_divider = 10,
+ .lcd_cfg = {
+ .name = "PH240320T",
+ .xres = 320,
+ .yres = 240,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT,
+ },
+ .board_cfg = {
+ .setup_sys = migor_lcd_qvga_setup,
+ },
+ .sys_bus_cfg = {
+ .ldmt2r = 0x06000a09,
+ .ldmt3r = 0x180e3418,
+ },
+ }
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe941fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device migor_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(migor_lcdc_resources),
+ .resource = migor_lcdc_resources,
+ .dev = {
+ .platform_data = &sh_mobile_lcdc_info,
+ },
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+ unsigned char value;
+
+ camera_clk = clk_get(NULL, "video_clk");
+ clk_set_rate(camera_clk, 24000000);
+ clk_enable(camera_clk); /* start VIO_CKO */
+
+ mdelay(10);
+ value = ctrl_inb(PORT_PTDR);
+ value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+ value |= 0x01;
+#endif
+ ctrl_outb(value, PORT_PTDR);
+ mdelay(10);
+
+ ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+ clk_disable(camera_clk); /* stop VIO_CKO */
+ clk_put(camera_clk);
+
+ ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+static unsigned char camera_ov772x_magic[] =
+{
+ 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+ 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+ 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+ 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+ 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+ 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+ 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+ 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+ 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+ 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+ 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+ 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+ 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+ 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+ 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+ 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+ 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+ 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+ 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+ 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+ 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+ 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+ 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+ 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+ 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+ 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+ 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+ 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+ 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+ 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+ 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+ 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+ 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+ 0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+ int enable)
+{
+ struct i2c_adapter *a = i2c_get_adapter(0);
+ struct i2c_msg msg;
+ int ret = 0;
+ int i;
+
+ if (!enable)
+ return 0; /* camera_power_off() is enough */
+
+ for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+ u_int8_t buf[8];
+
+ msg.addr = 0x21;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+
+ buf[0] = camera_ov772x_magic[i];
+ buf[1] = camera_ov772x_magic[i + 1];
+
+ ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+ }
+
+ return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+ .iface = 0,
+ .format_name = "RGB565",
+ .format_depth = 16,
+ .format = {
+ .pixelformat = V4L2_PIX_FMT_RGB565,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .width = 320,
+ .height = 240,
+ },
+ .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+ .set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+ .name = "soc_camera_platform",
+ .dev = {
+ .platform_data = &ov772x_info,
+ },
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+ | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+ .enable_camera = camera_power_on,
+ .disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device migor_ceu_device = {
+ .name = "sh_mobile_ceu",
+ .num_resources = ARRAY_SIZE(migor_ceu_resources),
+ .resource = migor_ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+};
+
static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
&sh_keysc_device,
+ &migor_lcdc_device,
+ &migor_ceu_device,
+ &migor_camera_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
};
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
+static struct i2c_board_info migor_i2c_devices[] = {
{
I2C_BOARD_INFO("rs5c372b", 0x32),
},
@@ -217,6 +446,12 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = {
static int __init migor_devices_setup(void)
{
+ clk_always_enable("mstp214"); /* KEYSC */
+ clk_always_enable("mstp200"); /* LCDC */
+ clk_always_enable("mstp203"); /* CEU */
+
+ platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
@@ -235,20 +470,51 @@ static void __init migor_setup(char **cmdline_p)
ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
- ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
/* NAND Flash */
ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
BSC_CS6ABCR);
- /* I2C */
- ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
/* Touch Panel - Enable IRQ6 */
ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+ /* LCDC - WVGA - Enable RGB Interface signals */
+ ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+ ctrl_outw(0x0000, PORT_PHCR);
+ ctrl_outw(0x0000, PORT_PLCR);
+ ctrl_outw(0x0000, PORT_PMCR);
+ ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+ ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+ /* LCDC - QVGA - Enable SYS Interface signals */
+ ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+ ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+ ctrl_outw(0x0000, PORT_PLCR);
+ ctrl_outw(0x0000, PORT_PMCR);
+ ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+ ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+ /* CEU */
+ ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+ ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+ ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+ ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+ ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+ ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+ ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+ ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
}
static struct sh_machine_vector mv_migor __initmv = {
diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile
new file mode 100644
index 000000000000..f663768429f0
--- /dev/null
+++ b/arch/sh/boards/renesas/rsk7203/Makefile
@@ -0,0 +1 @@
+obj-y := setup.o
diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c
new file mode 100644
index 000000000000..0bbda04b03b9
--- /dev/null
+++ b/arch/sh/boards/renesas/rsk7203/setup.c
@@ -0,0 +1,126 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct resource smc911x_resources[] = {
+ [0] = {
+ .start = 0x24000000,
+ .end = 0x24000000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 64,
+ .end = 64,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x001c0000,
+ }, {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x20000000,
+ .end = 0x20400000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+ .name = "RSK+ Flash",
+ .size = 0x400000,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+ int nr_parts = 0;
+
+ simple_map_init(&rsk7203_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes,
+ &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = rsk7203_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+ &smc911x_device,
+ &flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+ set_mtd_partitions();
+ return platform_add_devices(rsk7203_devices,
+ ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+ .mv_name = "RSK+7203",
+};
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile
new file mode 100644
index 000000000000..f6c0b55516d2
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c
new file mode 100644
index 000000000000..fd850bad2dec
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE (0xFFD00000)
+#define INTC_INT2PRI7 (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR (INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+ /* GPIO enabled */
+ ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+ /* enable GPIO interrupts */
+ ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+ INTC_INT2PRI7);
+
+ /* USBH enabled */
+ ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+ /* GETHER enabled */
+ ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+ /* DMAC enabled */
+ ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c
new file mode 100644
index 000000000000..925f16af7121
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/setup.c
@@ -0,0 +1,128 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/sh7763rdp.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+ {
+ .name = "U-Boot",
+ .offset = 0,
+ .size = (2 * 128 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ }, {
+ .name = "Linux-Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (20 * 128 * 1024),
+ }, {
+ .name = "Root Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+ .width = 2,
+ .parts = sh7763rdp_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0,
+ .end = (64 * 1024 * 1024),
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = sh7763rdp_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+ .dev = {
+ .platform_data = &sh7763rdp_nor_flash_data,
+ },
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+ &sh7763rdp_nor_flash_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+ return platform_add_devices(sh7763rdp_devices,
+ ARRAY_SIZE(sh7763rdp_devices));
+}
+__initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+ /* Board version check */
+ if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+ printk(KERN_INFO "RTE Standard Configuration\n");
+ else
+ printk(KERN_INFO "RTA Standard Configuration\n");
+
+ /* USB pin select bits (clear bit 5-2 to 0) */
+ ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+ /* USBH setup port I controls to other (clear bits 4-9 to 0) */
+ ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+ /* Select USB Host controller */
+ ctrl_outw(0x00, USB_USBHSC);
+
+ /* For LCD */
+ /* set PTJ7-1, bits 15-2 of PJCR to 0 */
+ ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+ /* set PTI5, bits 11-10 of PICR to 0 */
+ ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+ ctrl_outw(0, PORT_PKCR);
+ ctrl_outw(0, PORT_PLCR);
+ /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+ ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+ /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+ ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+ /* For HAC */
+ /* bit3-0 0100:HAC & SSI1 enable */
+ ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+ /* bit14 1:SSI_HAC_CLK enable */
+ ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+ /* SH-Ether */
+ ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+ ctrl_outw(0x0, PORT_PFCR);
+ ctrl_outw(0x0, PORT_PFCR);
+ ctrl_outw(0x0, PORT_PFCR);
+
+ /* MMC */
+ /*selects SCIF and MMC other functions */
+ ctrl_outw(0x0001, PORT_PSEL0);
+ /* MMC clock operates */
+ ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+ ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+ ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+ .mv_name = "sh7763drp",
+ .mv_setup = sh7763rdp_setup,
+ .mv_nr_irqs = 112,
+ .mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile
new file mode 100644
index 000000000000..77037567633b
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7785lcr/Makefile
@@ -0,0 +1 @@
+obj-y := setup.o
diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c
new file mode 100644
index 000000000000..b95d674ee704
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7785lcr/setup.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PLD_LEDCR,
+ .end = PLD_LEDCR,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct heartbeat_data heartbeat_data = {
+ .regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 4 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 4,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = NOR_FLASH_ADDR,
+ .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = R8A66597_ADDR,
+ .end = R8A66597_ADDR + R8A66597_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "r8a66597_hcd",
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
+ .resource = r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+ [0] = {
+ .start = SM107_MEM_ADDR,
+ .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SM107_REG_ADDR,
+ .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+ .pixclock = 35714, /* 28MHz */
+ .xres = 640,
+ .yres = 480,
+ .left_margin = 105,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 39,
+ .vsync_len = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+ .pixclock = 40000, /* 25MHz */
+ .xres = 640,
+ .yres = 480,
+ .left_margin = 2,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 39,
+ .vsync_len = 2,
+ .sync = 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+ .def_bpp = 16,
+ .def_mode = &sm501_default_mode_pnl,
+ .flags = SM501FB_FLAG_USE_INIT_MODE |
+ SM501FB_FLAG_USE_HWCURSOR |
+ SM501FB_FLAG_USE_HWACCEL |
+ SM501FB_FLAG_DISABLE_AT_EXIT |
+ SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+ .def_bpp = 16,
+ .def_mode = &sm501_default_mode_crt,
+ .flags = SM501FB_FLAG_USE_INIT_MODE |
+ SM501FB_FLAG_USE_HWCURSOR |
+ SM501FB_FLAG_USE_HWACCEL |
+ SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+ .fb_route = SM501_FB_OWN,
+ .fb_crt = &sm501_pdata_fbsub_crt,
+ .fb_pnl = &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+ .gpio_high = {
+ .set = 0x00001fe0,
+ .mask = 0x0,
+ },
+ .devices = 0,
+ .mclk = 84 * 1000000,
+ .m1xclk = 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+ .init = &sm501_initdata,
+ .fb = &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+ .name = "sm501",
+ .id = -1,
+ .dev = {
+ .platform_data = &sm501_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(sm501_resources),
+ .resource = sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+ [0] = {
+ .start = PCA9564_ADDR,
+ .end = PCA9564_ADDR + PCA9564_SIZE - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+ },
+ [1] = {
+ .start = 12,
+ .end = 12,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+ .gpio = 0,
+ .i2c_clock_speed = I2C_PCA_CON_330kHz,
+ .timeout = 100,
+};
+
+static struct platform_device i2c_device = {
+ .name = "i2c-pca-platform",
+ .id = -1,
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(i2c_resources),
+ .resource = i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+ &heartbeat_device,
+ &nor_flash_device,
+ &r8a66597_usb_host_device,
+ &sm501_device,
+ &i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("r2025sd", 0x32),
+ },
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+ i2c_register_board_info(0, sh7785lcr_i2c_devices,
+ ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+ return platform_add_devices(sh7785lcr_devices,
+ ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+ plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+ ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+ void __iomem *sm501_reg;
+
+ printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+ pm_power_off = sh7785lcr_power_off;
+
+ /* sm501 DRAM configuration */
+ sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+ writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+ .mv_name = "SH7785LCR",
+ .mv_setup = sh7785lcr_setup,
+ .mv_init_irq = init_sh7785lcr_IRQ,
+};
+