diff options
Diffstat (limited to 'arch/powerpc/kernel/legacy_serial.c')
| -rw-r--r-- | arch/powerpc/kernel/legacy_serial.c | 36 |
1 files changed, 24 insertions, 12 deletions
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 40bd7bd4e19a..936258881c98 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -48,6 +48,9 @@ static struct of_device_id legacy_serial_parents[] __initdata = { static unsigned int legacy_serial_count; static int legacy_serial_console = -1; +static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_SHARE_IRQ | UPF_FIXED_PORT; + static unsigned int tsi_serial_in(struct uart_port *p, int offset) { unsigned int tmp; @@ -71,8 +74,9 @@ static int __init add_legacy_port(struct device_node *np, int want_index, phys_addr_t taddr, unsigned long irq, upf_t flags, int irq_check_parent) { - const __be32 *clk, *spd; + const __be32 *clk, *spd, *rs; u32 clock = BASE_BAUD * 16; + u32 shift = 0; int index; /* get clock freq. if present */ @@ -83,6 +87,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index, /* get default speed if present */ spd = of_get_property(np, "current-speed", NULL); + /* get register shift if present */ + rs = of_get_property(np, "reg-shift", NULL); + if (rs && *rs) + shift = be32_to_cpup(rs); + /* If we have a location index, then try to use it */ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS) index = want_index; @@ -126,6 +135,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_ports[index].uartclk = clock; legacy_serial_ports[index].irq = irq; legacy_serial_ports[index].flags = flags; + legacy_serial_ports[index].regshift = shift; legacy_serial_infos[index].taddr = taddr; legacy_serial_infos[index].np = of_node_get(np); legacy_serial_infos[index].clock = clock; @@ -153,8 +163,6 @@ static int __init add_legacy_soc_port(struct device_node *np, { u64 addr; const __be32 *addrp; - upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ - | UPF_FIXED_PORT; struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly @@ -163,9 +171,8 @@ static int __init add_legacy_soc_port(struct device_node *np, if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; - /* if reg-shift or offset, don't try to use it */ - if ((of_get_property(np, "reg-shift", NULL) != NULL) || - (of_get_property(np, "reg-offset", NULL) != NULL)) + /* if reg-offset don't try to use it */ + if ((of_get_property(np, "reg-offset", NULL) != NULL)) return -1; /* if rtas uses this device, don't try to use it as well */ @@ -185,9 +192,11 @@ static int __init add_legacy_soc_port(struct device_node *np, * IO port value. It will be fixed up later along with the irq */ if (tsi && !strcmp(tsi->type, "tsi-bridge")) - return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, + NO_IRQ, legacy_port_flags, 0); else - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, + NO_IRQ, legacy_port_flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -233,7 +242,7 @@ static int __init add_legacy_isa_port(struct device_node *np, /* Add port, irq will be dealt with later */ return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), - taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0); + taddr, NO_IRQ, legacy_port_flags, 0); } @@ -306,7 +315,7 @@ static int __init add_legacy_pci_port(struct device_node *np, * IO port value. It will be fixed up later along with the irq */ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, - UPF_BOOT_AUTOCONF, np != pci_dev); + legacy_port_flags, np != pci_dev); } #endif @@ -315,17 +324,20 @@ static void __init setup_legacy_serial_console(int console) struct legacy_serial_info *info = &legacy_serial_infos[console]; struct plat_serial8250_port *port = &legacy_serial_ports[console]; void __iomem *addr; + unsigned int stride; + + stride = 1 << port->regshift; /* Check if a translated MMIO address has been found */ if (info->taddr) { addr = ioremap(info->taddr, 0x1000); if (addr == NULL) return; - udbg_uart_init_mmio(addr, 1); + udbg_uart_init_mmio(addr, stride); } else { /* Check if it's PIO and we support untranslated PIO */ if (port->iotype == UPIO_PORT && isa_io_special) - udbg_uart_init_pio(port->iobase, 1); + udbg_uart_init_pio(port->iobase, stride); else return; } |