diff options
Diffstat (limited to 'arch/mips/netlogic/xlr/irq.c')
| -rw-r--r-- | arch/mips/netlogic/xlr/irq.c | 300 |
1 files changed, 0 insertions, 300 deletions
diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c deleted file mode 100644 index 521bb7377eb0..000000000000 --- a/arch/mips/netlogic/xlr/irq.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/linkage.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mm.h> - -#include <asm/mipsregs.h> - -#include <asm/netlogic/xlr/iomap.h> -#include <asm/netlogic/xlr/pic.h> -#include <asm/netlogic/xlr/xlr.h> - -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/mips-extns.h> - -static u64 nlm_irq_mask; -static DEFINE_SPINLOCK(nlm_pic_lock); - -static void xlr_pic_enable(struct irq_data *d) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - unsigned long flags; - nlm_reg_t reg; - int irq = d->irq; - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - spin_lock_irqsave(&nlm_pic_lock, flags); - reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); - netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, - reg | (1 << 6) | (1 << 30) | (1 << 31)); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -static void xlr_pic_mask(struct irq_data *d) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - unsigned long flags; - nlm_reg_t reg; - int irq = d->irq; - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - spin_lock_irqsave(&nlm_pic_lock, flags); - reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); - netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, - reg | (1 << 6) | (1 << 30) | (0 << 31)); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -#ifdef CONFIG_PCI -/* Extra ACK needed for XLR on chip PCI controller */ -static void xlr_pci_ack(struct irq_data *d) -{ - nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET); - - netlogic_read_reg(pci_mmio, (0x140 >> 2)); -} - -/* Extra ACK needed for XLS on chip PCIe controller */ -static void xls_pcie_ack(struct irq_data *d) -{ - nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); - - switch (d->irq) { - case PIC_PCIE_LINK0_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK1_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK2_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK3_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); - break; - } -} - -/* For XLS B silicon, the 3,4 PCI interrupts are different */ -static void xls_pcie_ack_b(struct irq_data *d) -{ - nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); - - switch (d->irq) { - case PIC_PCIE_LINK0_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK1_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); - break; - case PIC_PCIE_XLSB0_LINK2_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); - break; - case PIC_PCIE_XLSB0_LINK3_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); - break; - } -} -#endif - -static void xlr_pic_ack(struct irq_data *d) -{ - unsigned long flags; - nlm_reg_t *mmio; - int irq = d->irq; - void *hd = irq_data_get_irq_handler_data(d); - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - if (hd) { - void (*extra_ack)(void *) = hd; - extra_ack(d); - } - mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - spin_lock_irqsave(&nlm_pic_lock, flags); - netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE))); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -/* - * This chip definition handles interrupts routed thru the XLR - * hardware PIC, currently IRQs 8-39 are mapped to hardware intr - * 0-31 wired the XLR PIC - */ -static struct irq_chip xlr_pic = { - .name = "XLR-PIC", - .irq_enable = xlr_pic_enable, - .irq_mask = xlr_pic_mask, - .irq_ack = xlr_pic_ack, -}; - -static void rsvd_irq_handler(struct irq_data *d) -{ - WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); -} - -/* - * Chip definition for CPU originated interrupts(timer, msg) and - * IPIs - */ -struct irq_chip nlm_cpu_intr = { - .name = "XLR-CPU-INTR", - .irq_enable = rsvd_irq_handler, - .irq_mask = rsvd_irq_handler, - .irq_ack = rsvd_irq_handler, -}; - -void __init init_xlr_irqs(void) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - uint32_t thread_mask = 1; - int level, i; - - pr_info("Interrupt thread mask [%x]\n", thread_mask); - for (i = 0; i < PIC_NUM_IRTS; i++) { - level = PIC_IRQ_IS_EDGE_TRIGGERED(i); - - /* Bind all PIC irqs to boot cpu */ - netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask); - - /* - * Use local scheduling and high polarity for all IRTs - * Invalidate all IRTs, by default - */ - netlogic_write_reg(mmio, PIC_IRT_1_BASE + i, - (level << 30) | (1 << 6) | (PIC_IRQ_BASE + i)); - } - - /* Make all IRQs as level triggered by default */ - for (i = 0; i < NR_IRQS; i++) { - if (PIC_IRQ_IS_IRT(i)) - irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq); - else - irq_set_chip_and_handler(i, &nlm_cpu_intr, - handle_percpu_irq); - } -#ifdef CONFIG_SMP - irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, - nlm_smp_function_ipi_handler); - irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, - nlm_smp_resched_ipi_handler); - nlm_irq_mask |= - ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE)); -#endif - -#ifdef CONFIG_PCI - /* - * For PCI interrupts, we need to ack the PIC controller too, overload - * irq handler data to do this - */ - if (nlm_chip_is_xls()) { - if (nlm_chip_is_xls_b()) { - irq_set_handler_data(PIC_PCIE_LINK0_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_LINK1_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, - xls_pcie_ack_b); - } else { - irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack); - } - } else { - /* XLR PCI controller ACK */ - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); - } -#endif - /* unmask all PIC related interrupts. If no handler is installed by the - * drivers, it'll just ack the interrupt and return - */ - for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) - nlm_irq_mask |= (1ULL << i); - - nlm_irq_mask |= (1ULL << IRQ_TIMER); -} - -void __init arch_init_irq(void) -{ - /* Initialize the irq descriptors */ - init_xlr_irqs(); - write_c0_eimr(nlm_irq_mask); -} - -void __cpuinit nlm_smp_irq_init(void) -{ - /* set interrupt mask for non-zero cpus */ - write_c0_eimr(nlm_irq_mask); -} - -asmlinkage void plat_irq_dispatch(void) -{ - uint64_t eirr; - int i; - - eirr = read_c0_eirr() & read_c0_eimr(); - if (!eirr) - return; - - /* no need of EIRR here, writing compare clears interrupt */ - if (eirr & (1 << IRQ_TIMER)) { - do_IRQ(IRQ_TIMER); - return; - } - - /* use dcltz: optimize below code */ - for (i = 63; i != -1; i--) { - if (eirr & (1ULL << i)) - break; - } - if (i == -1) { - pr_err("no interrupt !!\n"); - return; - } - - /* Ack eirr */ - write_c0_eirr(1ULL << i); - - do_IRQ(i); -} |