diff options
Diffstat (limited to 'arch/arm64/boot/dts')
479 files changed, 39584 insertions, 5084 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 7b107fa7414b..30dd6347a929 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -27,6 +27,7 @@ subdir-y += renesas subdir-y += rockchip subdir-y += socionext subdir-y += sprd +subdir-y += st subdir-y += synaptics subdir-y += tesla subdir-y += ti diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 62f45f71ec65..57ac18738c99 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -93,6 +93,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -407,7 +408,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts index 8857a3791593..6406a29c85f2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -4,7 +4,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" #include "sun50i-h5-cpu-opp.dtsi" -#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi> +#include <arm/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi> / { model = "Banana Pi BPI-M2-Plus v1.2 H5"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts index 77661006dfba..cfb943e9ae85 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts @@ -3,7 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" -#include <arm/sunxi-bananapi-m2-plus.dtsi> +#include <arm/allwinner/sunxi-bananapi-m2-plus.dtsi> / { model = "Banana Pi BPI-M2-Plus H5"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index fc570011495f..2f4b46746f47 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -8,4 +8,4 @@ /dts-v1/; #include "sun50i-h5.dtsi" -#include <arm/sunxi-h3-h5-emlid-neutis.dtsi> +#include <arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts index d811df332824..b79018c65cae 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -5,7 +5,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" #include "sun50i-h5-cpu-opp.dtsi" -#include <arm/sunxi-libretech-all-h3-cc.dtsi> +#include <arm/allwinner/sunxi-libretech-all-h3-cc.dtsi> / { model = "Libre Computer Board ALL-H3-CC H5"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts index e59d68b525fc..dc657de2a1a4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts @@ -3,7 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" -#include <arm/sunxi-libretech-all-h3-it.dtsi> +#include <arm/allwinner/sunxi-libretech-all-h3-it.dtsi> / { model = "Libre Computer Board ALL-H3-IT H5"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index a56fae761a1f..d3caf27b6a55 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (C) 2016 ARM Ltd. -#include <arm/sunxi-h3-h5.dtsi> +#include <arm/allwinner/sunxi-h3-h5.dtsi> #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi index 73a352ea8fd5..39481d7fd7d4 100644 --- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi +++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi @@ -250,6 +250,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; cluster1_l2: cache@100 { @@ -258,6 +259,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; cluster2_l2: cache@200 { @@ -266,6 +268,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; cluster3_l2: cache@300 { @@ -274,6 +277,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index cd1c5b04890a..6f61798a109f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts new file mode 100644 index 000000000000..edce8850b338 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C302 aw409 Development Board"; + compatible = "amlogic,aw409", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x10000000>; + }; +}; + +&uart_b { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi new file mode 100644 index 000000000000..60ad4f3eef9d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb4: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + uart_b: serial@7a000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index eed96f262844..c8f344596285 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -37,6 +37,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b984950591e2..768d0ed78dbe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -106,6 +106,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index f58fd2a6fe61..543e70669df5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -51,6 +51,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 431572b384db..86e6ceb31d5e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -106,6 +106,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 11f89bfecb56..2673f0dbafe7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -133,6 +133,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 617d322af0df..643f94d9d08e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -89,6 +89,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 70a10bcafcff..377660d705d1 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -97,15 +97,23 @@ }; xgene_L2_0: l2-cache-0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_1: l2-cache-1 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_2: l2-cache-2 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_3: l2-cache-3 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index d73e809fe41a..efa79209f4b2 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -81,15 +81,23 @@ }; xgene_L2_0: l2-cache-0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_1: l2-cache-1 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_2: l2-cache-2 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_3: l2-cache-3 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 7bdeb965f0a9..8db4243a4947 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -13,7 +13,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "vexpress-v2m-rs1.dtsi" +#include "arm/arm/vexpress-v2m-rs1.dtsi" / { model = "V2F-1XV7 Cortex-A53x2 SMM"; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 05d8c5ecf3b0..8b4591ddd27c 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,4 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 + +# Enables support for device-tree overlays +DTC_FLAGS := -@ + dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts index d24c53682e44..c7280bdefa8d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2711-rpi-4-b.dts" +#include "arm/broadcom/bcm2711-rpi-4-b.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts index b9000f58beb5..d9d2852b794f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2711-rpi-400.dts" +#include "arm/broadcom/bcm2711-rpi-400.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts index e36d395e3951..8810322aa66a 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2711-rpi-cm4-io.dts" +#include "arm/broadcom/bcm2711-rpi-cm4-io.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts index f0ec56a1c4d7..17d778a7e0c9 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2837-rpi-3-a-plus.dts" +#include "arm/broadcom/bcm2837-rpi-3-a-plus.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts index 46ad2023cccf..0cf6240b6bf0 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2837-rpi-3-b-plus.dts" +#include "arm/broadcom/bcm2837-rpi-3-b-plus.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index 89b78d6c19bf..f429468fd86e 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2837-rpi-3-b.dts" +#include "arm/broadcom/bcm2837-rpi-3-b.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts index b1c4ab212c64..3fa21bd16b49 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2837-rpi-cm3-io3.dts" +#include "arm/broadcom/bcm2837-rpi-cm3-io3.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts index 307ae693e4a0..363381a0cfb5 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts @@ -1,2 +1,2 @@ // SPDX-License-Identifier: GPL-2.0 -#include "arm/bcm2837-rpi-zero-2-w.dts" +#include "arm/broadcom/bcm2837-rpi-zero-2-w.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index 457805efb385..f549bda8c48c 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -64,6 +64,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi index 46aa8c0b7971..d658c81f7285 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi @@ -52,6 +52,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi index 7020f2e995e2..4f474d47022e 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi @@ -36,6 +36,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi index 6a0242cbea57..909f254dc47d 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -52,6 +52,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi index 1a12905266ef..685ae32951c9 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi @@ -52,6 +52,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi index f41ebc30666f..820553ce541b 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -36,6 +36,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi index fa2688f41f06..0eb93c298297 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -51,6 +51,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index e1b80e569cdf..9dcd25ec2c04 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -80,6 +80,7 @@ CLUSTER0_L2: l2-cache@0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi index 56789ccf9454..46a827521921 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -44,7 +44,7 @@ compatible = "pinctrl-single"; reg = <0x0014029c 0x26c>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; pinctrl-single,gpio-range = < @@ -56,14 +56,14 @@ }; /* pinctrl functions */ - tsio_pins: pinmux_gpio_14 { + tsio_pins: gpio-14-pins { pinctrl-single,pins = < 0x038 MODE_NITRO /* tsio_0 */ 0x03c MODE_NITRO /* tsio_1 */ >; }; - nor_pins: pinmux_pnor_adv_n { + nor_pins: pnor-adv-n-pins { pinctrl-single,pins = < 0x0ac MODE_PNOR /* nand_ce1_n */ 0x0b0 MODE_PNOR /* nand_ce0_n */ @@ -119,7 +119,7 @@ >; }; - nand_pins: pinmux_nand_ce1_n { + nand_pins: nand-ce1-n-pins { pinctrl-single,pins = < 0x0ac MODE_NAND /* nand_ce1_n */ 0x0b0 MODE_NAND /* nand_ce0_n */ @@ -148,59 +148,59 @@ >; }; - pwm0_pins: pinmux_pwm_0 { + pwm0_pins: pwm-0-pins { pinctrl-single,pins = < 0x10c MODE_NITRO >; }; - pwm1_pins: pinmux_pwm_1 { + pwm1_pins: pwm-1-pins { pinctrl-single,pins = < 0x110 MODE_NITRO >; }; - pwm2_pins: pinmux_pwm_2 { + pwm2_pins: pwm-2-pins { pinctrl-single,pins = < 0x114 MODE_NITRO >; }; - pwm3_pins: pinmux_pwm_3 { + pwm3_pins: pwm-3-pins { pinctrl-single,pins = < 0x118 MODE_NITRO >; }; - dbu_rxd_pins: pinmux_uart1_sin_nitro { + dbu_rxd_pins: uart1-sin-nitro-pins { pinctrl-single,pins = < 0x11c MODE_NITRO /* dbu_rxd */ 0x120 MODE_NITRO /* dbu_txd */ >; }; - uart1_pins: pinmux_uart1_sin_nand { + uart1_pins: uart1-sin-nand-pins { pinctrl-single,pins = < 0x11c MODE_NAND /* uart1_sin */ 0x120 MODE_NAND /* uart1_out */ >; }; - uart2_pins: pinmux_uart2_sin { + uart2_pins: uart2-sin-pins { pinctrl-single,pins = < 0x124 MODE_NITRO /* uart2_sin */ 0x128 MODE_NITRO /* uart2_out */ >; }; - uart3_pins: pinmux_uart3_sin { + uart3_pins: uart3-sin-pins { pinctrl-single,pins = < 0x12c MODE_NITRO /* uart3_sin */ 0x130 MODE_NITRO /* uart3_out */ >; }; - i2s_pins: pinmux_i2s_bitclk { + i2s_pins: i2s-bitclk-pins { pinctrl-single,pins = < 0x134 MODE_NITRO /* i2s_bitclk */ 0x138 MODE_NITRO /* i2s_sdout */ @@ -211,7 +211,7 @@ >; }; - qspi_pins: pinumx_qspi_hold_n { + qspi_pins: qspi-hold-n-pins { pinctrl-single,pins = < 0x14c MODE_NAND /* qspi_hold_n */ 0x150 MODE_NAND /* qspi_wp_n */ @@ -222,28 +222,28 @@ >; }; - mdio_pins: pinumx_ext_mdio { + mdio_pins: ext-mdio-pins { pinctrl-single,pins = < 0x164 MODE_NITRO /* ext_mdio */ 0x168 MODE_NITRO /* ext_mdc */ >; }; - i2c0_pins: pinmux_i2c0_sda { + i2c0_pins: i2c0-sda-pins { pinctrl-single,pins = < 0x16c MODE_NITRO /* i2c0_sda */ 0x170 MODE_NITRO /* i2c0_scl */ >; }; - i2c1_pins: pinmux_i2c1_sda { + i2c1_pins: i2c1-sda-pins { pinctrl-single,pins = < 0x174 MODE_NITRO /* i2c1_sda */ 0x178 MODE_NITRO /* i2c1_scl */ >; }; - sdio0_pins: pinmux_sdio0_cd_l { + sdio0_pins: sdio0-cd-l-pins { pinctrl-single,pins = < 0x17c MODE_NITRO /* sdio0_cd_l */ 0x180 MODE_NITRO /* sdio0_clk_sdcard */ @@ -262,7 +262,7 @@ >; }; - sdio1_pins: pinmux_sdio1_cd_l { + sdio1_pins: sdio1-cd-l-pins { pinctrl-single,pins = < 0x1b4 MODE_NITRO /* sdio1_cd_l */ 0x1b8 MODE_NITRO /* sdio1_clk_sdcard */ @@ -281,7 +281,7 @@ >; }; - spi0_pins: pinmux_spi0_sck_nand { + spi0_pins: spi0-sck-nand-pins { pinctrl-single,pins = < 0x1ec MODE_NITRO /* spi0_sck */ 0x1f0 MODE_NITRO /* spi0_rxd */ @@ -290,7 +290,7 @@ >; }; - spi1_pins: pinmux_spi1_sck_nand { + spi1_pins: spi1-sck-nand-pins { pinctrl-single,pins = < 0x1fc MODE_NITRO /* spi1_sck */ 0x200 MODE_NITRO /* spi1_rxd */ @@ -299,14 +299,14 @@ >; }; - nuart_pins: pinmux_uart0_sin_nitro { + nuart_pins: uart0-sin-nitro-pins { pinctrl-single,pins = < 0x20c MODE_NITRO /* nuart_rxd */ 0x210 MODE_NITRO /* nuart_txd */ >; }; - uart0_pins: pinumux_uart0_sin_nand { + uart0_pins: uart0-sin-nand-pins { pinctrl-single,pins = < 0x20c MODE_NAND /* uart0_sin */ 0x210 MODE_NAND /* uart0_out */ @@ -319,7 +319,7 @@ >; }; - drdu2_pins: pinmux_drdu2_overcurrent { + drdu2_pins: drdu2-overcurrent-pins { pinctrl-single,pins = < 0x22c MODE_NITRO /* drdu2_overcurrent */ 0x230 MODE_NITRO /* drdu2_vbus_ppc */ @@ -328,7 +328,7 @@ >; }; - drdu3_pins: pinmux_drdu3_overcurrent { + drdu3_pins: drdu3-overcurrent-pins { pinctrl-single,pins = < 0x23c MODE_NITRO /* drdu3_overcurrent */ 0x240 MODE_NITRO /* drdu3_vbus_ppc */ @@ -337,7 +337,7 @@ >; }; - usb3h_pins: pinmux_usb3h_overcurrent { + usb3h_pins: usb3h-overcurrent-pins { pinctrl-single,pins = < 0x24c MODE_NITRO /* usb3h_overcurrent */ 0x250 MODE_NITRO /* usb3h_vbus_ppc */ diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 388424b3e1d3..7aece79bf882 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -109,21 +109,25 @@ CLUSTER0_L2: l2-cache@0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CLUSTER1_L2: l2-cache@100 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CLUSTER2_L2: l2-cache@200 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CLUSTER3_L2: l2-cache@300 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index b1fa68835b09..5ea8bda2bfa6 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -734,4 +734,4 @@ }; #include "exynos7-pinctrl.dtsi" -#include "arm/exynos-syscon-restart.dtsi" +#include "arm/samsung/exynos-syscon-restart.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi index 23c2e0bb0a2c..d69fc2392bd0 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi @@ -452,4 +452,4 @@ }; #include "exynos7885-pinctrl.dtsi" -#include "arm/exynos-syscon-restart.dtsi" +#include "arm/samsung/exynos-syscon-restart.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index d67e98120313..aa077008b3be 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -200,7 +200,6 @@ pmu_system_controller: system-controller@11860000 { compatible = "samsung,exynos850-pmu", "syscon"; reg = <0x11860000 0x10000>; - clocks = <&cmu_apm CLK_GOUT_PMU_ALIVE_PCLK>; reboot: syscon-reboot { compatible = "syscon-reboot"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index ef7d17aef58f..a750be13ace8 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -54,7 +54,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb @@ -99,6 +101,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 678bb0358751..9cbb31191cf9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -47,6 +47,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index b9fd24cdc919..f8acbefc805b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -85,6 +85,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index a01e3cfec77f..50f68ca5a9af 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -80,6 +80,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 1e5d76c4d83d..1aa38ed09aa4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -96,21 +96,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CPU_PW20: cpu-pw20 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index c12c86915ec8..8581ea55d254 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -96,21 +96,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CPU_PW20: cpu-pw20 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 70fadd79851a..792b7224ca5b 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -60,6 +60,7 @@ A35_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts new file mode 100644 index 000000000000..1c4e4d175989 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Emtop Embedded Solutions + */ + +/dts-v1/; + +#include "imx8mm-emtop-som.dtsi" + +/ { + model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1"; + compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som", + "fsl,imx8mm"; + +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi new file mode 100644 index 000000000000..67d22d3768aa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Emtop Embedded Solutions + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> + +#include "imx8mm.dtsi" + +/ { + model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM"; + compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + function = LED_FUNCTION_POWER; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck3: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <945000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <945000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3600000>; + }; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_led: emtop-gpio-led-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + >; + }; + + pinctrl_i2c1: emtop-i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: emtop-pmic-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart2: emtop-uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc3: emtop-usdhc3-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: emtop-usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: emtop-usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: emtop-wdog-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 3f9dfd4d3884..df8e808ac473 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -19,6 +19,18 @@ reg = <0x0 0x40000000 0 0x80000000>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -303,6 +315,41 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; + reg-names = "main", "cec", "edid", "packet"; + adi,dsi-lanes = <4>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + }; + }; + ptn5110: tcpc@50 { compatible = "nxp,ptn5110"; pinctrl-names = "default"; @@ -348,6 +395,26 @@ }; }; +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&adv7533_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,tx-deemph-gen1 = <0x2d>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts new file mode 100644 index 000000000000..164df627a213 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019-2020 NXP + */ + +/dts-v1/; + +#include "imx8mm-evk.dtsi" + +/ { + model = "FSL i.MX8MM EVKB"; + compatible = "fsl,imx8mm-evkb", "fsl,imx8mm"; +}; + +&i2c1 { + /delete-node/ pmic@4b; + + pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* VDD_SOC with PCIe */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-standby-voltage = <850000>; + }; + + /* VDD_GPU, VDD_VPU, VDD_DRAM */ + buck3_reg: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_3V3 */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1V8, NVCC_1V8, NVCC_ENET */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_DRAM for LPDDR4 */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_SNVS_1P8 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_SNVS_0P8 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_*_1V8 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_PHY_0V9 */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_SD2 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts index e9447738b104..606a4f4d5f15 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts @@ -80,6 +80,35 @@ startup-delay-us = <100>; off-on-delay-us = <12000>; }; + + panel { + compatible = "panel-lvds"; + width-mm = <170>; + height-mm = <28>; + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <49500000>; + hactive = <800>; + hback-porch = <48>; + hfront-porch = <312>; + hsync-len = <40>; + vactive = <600>; + vback-porch = <19>; + vfront-porch = <61>; + vsync-len = <20>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_out_bridge: endpoint { + remote-endpoint = <&bridge_out_panel>; + }; + }; + }; }; &ecspi1 { @@ -113,8 +142,60 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + bridge@2c { + compatible = "ti,sn65dsi83"; + reg = <0x2c>; + enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_bridge>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; }; +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out_bridge: endpoint { + data-lanes = <1 2>; + lane-polarities = <1 0 0 0 0>; + remote-endpoint = <&bridge_in_dsi>; + }; + }; + }; +}; + + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -166,6 +247,12 @@ >; }; + pinctrl_dsi_bridge: dsibridgeggrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x19 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 12260290c109..b4466a26d838 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -219,12 +219,14 @@ read-only; reg = <0x53>; pagesize = <16>; + vcc-supply = <®_vcc3v3>; }; eeprom0: eeprom@57 { compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; + vcc-supply = <®_vcc3v3>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 9e7d38872157..de7f67a4ff2a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -149,7 +149,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; @@ -234,8 +234,6 @@ }; fan-controller@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x0a>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index df3b2c93d2d5..0ec2ce3dd721 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -354,7 +354,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index c33ec6826d32..03cd29063312 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -327,7 +327,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 363020a08c9b..6f26914602c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -293,7 +293,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 5a1f7c30afe5..16761975f56e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -43,6 +43,17 @@ enable-active-high; }; + reg_camera: regulator-camera { + compatible = "regulator-fixed"; + regulator-name = "mipi_pwr"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "vsd_3v3"; @@ -63,18 +74,30 @@ enable-active-high; }; - sound { - compatible = "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - audio-cpu = <&sai3>; - audio-codec = <&wm8962>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + frame-master; + bitclock-master; + }; }; }; @@ -96,6 +119,36 @@ }; }; +&i2c2 { + clock-frequency = <384000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + camera@10 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x10>; + clocks = <&clk IMX8MN_CLK_CLKO1>; + clock-names = "xclk"; + assigned-clocks = <&clk IMX8MN_CLK_CLKO1>; + assigned-clock-parents = <&clk IMX8MN_CLK_24M>; + assigned-clock-rates = <24000000>; + AVDD-supply = <®_camera>; /* 2.8v */ + powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + + port { + /* MIPI CSI-2 bus endpoint */ + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; &i2c4 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -142,14 +195,32 @@ 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; + #sound-dai-cells = <0>; }; }; +&isi { + status = "okay"; +}; + &easrc { fsl,asrc-rate = <48000>; status = "okay"; }; +&mipi_csi { + status = "okay"; + + ports { + port@0 { + mipi_csi_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + }; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -226,6 +297,14 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59 + >; + }; + pinctrl_pcal6414: pcal6414-gpiogrp { fsl,pins = < MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts index 3ed7021a487c..406a711486da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts @@ -152,46 +152,6 @@ extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; }; -&pinctrl_fec1 { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ - >; -}; - -&pinctrl_fec1_sleep { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120 - MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120 - MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120 - MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120 - MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120 - MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120 - MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120 - MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120 - MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120 - MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120 - MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120 - MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120 - MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120 - MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120 - /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ - >; -}; - &iomuxc { pinctrl_captouch: captouchgrp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index cbd9d124c80d..d3a67109d55b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -27,6 +27,7 @@ regulator-name = "eth_phy_pwr"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <20000>; gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -228,6 +229,12 @@ }; }; }; + + eeprom_som: eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + pagesize = <16>; + }; }; &i2c3 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 7c12518dbc96..2ddba4213001 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -325,7 +325,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 8be8f090e8b8..9869fe7652fc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -1104,6 +1104,30 @@ }; }; + isi: isi@32e20000 { + compatible = "fsl,imx8mn-isi"; + reg = <0x32e20000 0x8000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&disp_blk_ctrl>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in: endpoint { + remote-endpoint = <&mipi_csi_out>; + }; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>; @@ -1147,6 +1171,42 @@ #power-domain-cells = <1>; }; + mipi_csi: mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, + <&clk IMX8MN_SYS_PLL2_1000M>; + assigned-clock-rates = <333000000>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_CAMERA_PIXEL>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_CSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_out: endpoint { + remote-endpoint = <&isi_in>; + }; + }; + }; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x32e40000 0x200>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index cdae45a48c2c..06e91297fb16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -118,6 +118,15 @@ clock-frequency = <100000000>; }; + reg_audio: regulator-wm8962 { + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -137,6 +146,32 @@ gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; + frame-master; + bitclock-master; + }; + }; }; &ecspi2 { @@ -239,6 +274,34 @@ clock-frequency = <384000>; status = "okay"; + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wm8962>; + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; + assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-rates = <22576000>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + #sound-dai-cells = <0>; + }; + pca6416: gpio@20 { compatible = "nxp,pcal6416"; reg = <0x20>; @@ -315,6 +378,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -477,6 +550,16 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + >; + }; + pinctrl_tpm: tpmgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */ @@ -547,4 +630,10 @@ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 >; }; + + pinctrl_wm8962: wm8962grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x59 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 92df6c1277c3..e9fb5f7f39b5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -23,6 +23,12 @@ stdout-path = &uart1; }; + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -102,6 +108,43 @@ pinctrl-names = "default"; }; }; + + reg_3p3vdd: regulator-3p3vdd { /* 3.3VDD */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "3P3VDD"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&i2c5 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3vdd>; + VDDIO-supply = <®_vdd_3p3v_awo>; + }; }; &fec { /* Second ethernet */ @@ -155,6 +198,17 @@ status = "okay"; }; +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &usb3_1 { fsl,over-current-active-low; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts index b5e76b992a10..31d85d5871c9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -23,10 +23,16 @@ stdout-path = &uart1; }; - clk_pcie: clock-pcie { + clk_ext_audio_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <24000000>; + }; + + clk_xtal25: clock-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; connector { @@ -140,12 +146,30 @@ }; }; - reg_avdd: regulator-avdd { /* AUDIO_VDD */ + reg_3p3vdd: regulator-3p3vdd { /* 3.3VDD */ compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "AUDIO_VDD"; + regulator-name = "3P3VDD"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; @@ -161,6 +185,15 @@ #size-cells = <0>; reg = <0>; + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3vdd>; + VDDIO-supply = <®_vdd_3p3v_awo>; + }; + typec@3d { compatible = "nxp,ptn5150"; reg = <0x3d>; @@ -203,6 +236,13 @@ pagesize = <16>; reg = <0x54>; }; + + pcieclk: clock@6b { + compatible = "skyworks,si52144"; + reg = <0x6b>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; i2cmuxed1: i2c@1 { /* HDMI DDC I2C */ @@ -244,7 +284,7 @@ }; &pcie_phy { - clocks = <&clk_pcie>; + clocks = <&pcieclk 1>; clock-names = "ref"; fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; status = "okay"; @@ -256,6 +296,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &usb_dwc3_0 { usb-role-switch; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 7e804f650784..cb1953d14aa9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -49,6 +49,14 @@ startup-delay-us = <100>; vin-supply = <&buck4>; }; + + reg_vdd_3p3v_awo: regulator-vdd-3p3v-awo { /* VDD_3V3_AWO */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VDD_3P3V_AWO"; + }; }; &A53_0 { @@ -232,6 +240,36 @@ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + tc_bridge: bridge@f { + compatible = "toshiba,tc9595", "toshiba,tc358767"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tc9595>; + reg = <0xf>; + clock-names = "ref"; + clocks = <&clk IMX8MP_CLK_CLKOUT2>; + assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>, + <&clk IMX8MP_CLK_CLKOUT2>, + <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-rates = <13000000>, <13000000>, <156000000>; + reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tc_bridge_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + pmic: pmic@25 { compatible = "nxp,pca9450c"; reg = <0x25>; @@ -398,6 +436,22 @@ status = "okay"; }; +&mipi_dsi { + samsung,burst-clock-frequency = <160000000>; + samsung,esc-clock-frequency = <10000000>; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&tc_bridge_in>; + }; + }; + }; +}; + &pwm1 { pinctrl-0 = <&pinctrl_pwm1>; pinctrl-names = "default"; @@ -863,6 +917,24 @@ >; }; + pinctrl_tc9595: dhcom-tc9595-grp { + fsl,pins = < + /* RESET_DSIBRIDGE */ + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000146 + /* DSI-CONV_INT Interrupt */ + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x141 + >; + }; + + pinctrl_sai3: dhcom-sai3-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + >; + }; + pinctrl_touch: dhcom-touch-grp { fsl,pins = < /* #TOUCH_INT */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 7816853162b3..fa37ce89f8d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -40,6 +40,17 @@ clock-frequency = <100000000>; }; + reg_audio_pwr: regulator-audio-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audio_pwr_reg>; + regulator-name = "audio-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; regulator-name = "can1-stby"; @@ -83,6 +94,37 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8960-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speaker", "External Speaker", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "External Speaker", "SPK_LP", + "External Speaker", "SPK_LN", + "External Speaker", "SPK_RP", + "External Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "Mic Jack", "MICB"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8960>; + }; + + }; }; &flexspi { @@ -344,6 +386,18 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; + clock-names = "mclk"; + wlf,shared-lrclk; + wlf,hp-cfg = <3 2 3>; + wlf,gpio-cfg = <1 3>; + SPKVDD1-supply = <®_audio_pwr>; + }; + pca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -422,6 +476,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -499,6 +563,12 @@ }; &iomuxc { + pinctrl_audio_pwr_reg: audiopwrreggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0xd6 + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 @@ -668,6 +738,16 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts index 470ff8e31e32..64d522c71a44 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -14,6 +14,67 @@ compatible = "avnet,sm2s-imx8mp-14N0600E-ep1", "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp", "fsl,imx8mp"; + + reg_vcc_3v3_audio: 3v3-audio-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_AUD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vcc_1v8_audio: 1v8-audio-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_AUD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,bitclock-master = <&codec_dai>; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&i2c1 { + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + + assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <24000000>; + clocks = <&clk IMX8MP_CLK_CLKOUT1>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + VDDA-supply = <®_vcc_3v3_audio>; + VDDD-supply = <®_vcc_1v8_audio>; + VDDIO-supply = <®_vcc_1v8_audio>; + }; +}; + +/* I2S-0 = sai2 */ +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + + fsl,sai-mclk-direction-output; + status = "okay"; }; &flexcan1 { @@ -32,6 +93,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_smarc_gpio>; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + >; + }; + pinctrl_smarc_gpio: smarcgpiosgrp { fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index d8fb29e7e148..4240e20d38ac 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -202,6 +202,13 @@ }; }; + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tq-tlv320aic32x"; + audio-cpu = <&sai3>; + audio-codec = <&tlv320aic3x04>; + }; + thermal-zones { soc-thermal { trips { @@ -449,6 +456,18 @@ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tlv320aic3x04>; + reg = <0x18>; + clock-names = "mclk"; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + iov-supply = <®_vcc_3v3>; + ldoin-supply = <®_vcc_3v3>; + }; + se97_1c: temperature-sensor@1c { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1c>; @@ -528,6 +547,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -843,6 +872,23 @@ fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x80>; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x94 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x94 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x94 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x94 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x94 + >; + }; + + pinctrl_tlv320aic3x04: tlv320aic3x04grp { + fsl,pins = < + /* CODEC RST# */ + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x180 + >; + }; + /* X61 */ pinctrl_uart1: uart1grp { fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>, diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi new file mode 100644 index 000000000000..560c68e4da6d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -0,0 +1,587 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + aliases { + ethernet0 = &eqos; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + key-user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + key-eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + key-tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck3_reg>; +}; + +&A53_1 { + cpu-supply = <&buck3_reg>; +}; + +&A53_2 { + cpu-supply = <&buck3_reg>; +}; + +&A53_3 { + cpu-supply = <&buck3_reg>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <0x0>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@16 { + gw,mode = <4>; + reg = <0x16>; + label = "fan_tach"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_adc1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_adc2"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_1p0"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_1p8"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_2p5"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_soc"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_arm"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + + fan-controller@0 { + compatible = "gw,gsc-fan"; + reg = <0x0a>; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + /* vdd_soc */ + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* vdd_dram */ + buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + /* vdd_arm */ + buck3_reg: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* vdd_1p8 */ + buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT2: nvcc_snvs_1p8 */ + ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT3: vdd_1p0 */ + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT4: vdd_2p5 */ + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT5: vdd_3p3 */ + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +/* off-board header */ +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* off-board header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* off-board header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* off-board */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + status = "okay"; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + >; + }; + + pinctrl_ethphy0: ethphy0grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x140 /* RST# */ + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x150 /* IRQ# */ + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x150 /* IRQ# */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c2 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c2 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index eb51d648359b..92514b71b5f4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -281,7 +281,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts new file mode 100644 index 000000000000..4a1bbbbe19e6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include "imx8mp-venice-gw702x.dtsi" +#include "imx8mp-venice-gw7905.dtsi" + +/ { + model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit"; + compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; +}; + +/* Disable SOM interfaces not used on baseboard */ +&eqos { + status = "disabled"; +}; + +&usdhc1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi new file mode 100644 index 000000000000..0d40cb0f05f6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> + +/ { + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + compatible = "regulator-fixed"; + regulator-name = "SD2_3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "gpioa", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "gpiod", "", "", + "gpiob", "gpioc", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "pci_usb_sel", "", + "pci_wdis#", "", "", ""; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* USB1 - Type C front panel SINK port J14 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +/* USB2 4-port USB3.0 HUB: + * P1 - USBC connector (host only) + * P2 - USB2 test connector + * P3 - miniPCIe full card + * P4 - miniPCIe half card + */ +&usb3_phy1 { + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x40000040 /* GPIOA */ + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000040 /* GPIOD */ + MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x40000040 /* GPIOB */ + MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x40000040 /* GPIOC */ + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40000106 /* PCI_USBSEL */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCI_WDIS# */ + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x6 /* LEDG */ + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x6 /* LEDR */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x106 + >; + }; + + pinctrl_reg_usb2_en: regusb2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x6 /* USBHUB_RST# (ext p/u) */ + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 428c60462e3d..cc406bb338fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -304,6 +304,210 @@ nvmem-cells = <&imx8mp_uid>; nvmem-cell-names = "soc_unique_id"; + etm0: etm@28440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28440000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_0>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + }; + + etm1: etm@28540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28540000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_1>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + }; + + etm2: etm@28640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28640000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_2>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port2>; + }; + }; + }; + }; + + etm3: etm@28740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28740000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_3>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port3>; + }; + }; + }; + }; + + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ca_funnel_in_port0: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + + ca_funnel_in_port2: endpoint { + remote-endpoint = <&etm2_out_port>; + }; + }; + + port@3 { + reg = <3>; + + ca_funnel_in_port3: endpoint { + remote-endpoint = <&etm3_out_port>; + }; + }; + }; + + out-ports { + port { + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + }; + }; + + funnel@28c03000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x28c03000 0x1000>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hugo_funnel_in_port0: endpoint { + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + + hugo_funnel_in_port1: endpoint { + /* M7 input */ + }; + }; + + port@2 { + reg = <2>; + + hugo_funnel_in_port2: endpoint { + /* DSP input */ + }; + }; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + }; + }; + + etf@28c04000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x28c04000 0x1000>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf_in_port: endpoint { + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + }; + + out-ports { + port { + etf_out_port: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + }; + + etr@28c06000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x28c06000 0x1000>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; @@ -534,26 +738,16 @@ <&clk IMX8MP_CLK_A53_CORE>, <&clk IMX8MP_CLK_NOC>, <&clk IMX8MP_CLK_NOC_IO>, - <&clk IMX8MP_CLK_GIC>, - <&clk IMX8MP_CLK_AUDIO_AHB>, - <&clk IMX8MP_CLK_AUDIO_AXI_SRC>, - <&clk IMX8MP_AUDIO_PLL1>, - <&clk IMX8MP_AUDIO_PLL2>; + <&clk IMX8MP_CLK_GIC>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_ARM_PLL_OUT>, <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL2_500M>, - <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL1_800M>; + <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <0>, <0>, <1000000000>, <800000000>, - <500000000>, - <400000000>, - <800000000>, - <393216000>, - <361267200>; + <500000000>; }; src: reset-controller@30390000 { @@ -595,6 +789,13 @@ reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>; }; + pgc_audio: power-domain@5 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>; + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, + <&clk IMX8MP_CLK_AUDIO_AXI>; + }; + pgc_gpu2d: power-domain@6 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_GPU2D>; @@ -1147,6 +1348,157 @@ }; }; + aips5: bus@30c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + spba-bus@30c00000 { + compatible = "fsl,spba-bus", "simple-bus"; + reg = <0x30c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sai1: sai@30c10000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c10000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai2: sai@30c20000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c20000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai3: sai@30c30000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c30000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai5: sai@30c50000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c50000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai6: sai@30c60000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c60000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai7: sai@30c80000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c80000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + sdma3: dma-controller@30e00000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e00000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma2: dma-controller@30e10000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e10000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + audio_blk_ctrl: clock-controller@30e20000 { + compatible = "fsl,imx8mp-audio-blk-ctrl"; + reg = <0x30e20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, + <&clk IMX8MP_CLK_SAI1>, + <&clk IMX8MP_CLK_SAI2>, + <&clk IMX8MP_CLK_SAI3>, + <&clk IMX8MP_CLK_SAI5>, + <&clk IMX8MP_CLK_SAI6>, + <&clk IMX8MP_CLK_SAI7>; + clock-names = "ahb", + "sai1", "sai2", "sai3", + "sai5", "sai6", "sai7"; + power-domains = <&pgc_audio>; + }; + }; + noc: interconnect@32700000 { compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; reg = <0x32700000 0x100000>; @@ -1174,6 +1526,118 @@ #size-cells = <1>; ranges; + isi_0: isi@32e00000 { + compatible = "fsl,imx8mp-isi"; + reg = <0x32e00000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&media_blk_ctrl>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + isi_in_0: endpoint { + remote-endpoint = <&mipi_csi_0_out>; + }; + }; + + port@1 { + reg = <1>; + + isi_in_1: endpoint { + remote-endpoint = <&mipi_csi_1_out>; + }; + }; + }; + }; + + dewarp: dwe@32e30000 { + compatible = "nxp,imx8mp-dw100"; + reg = <0x32e30000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "ahb"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>; + }; + + mipi_csi_0: csi@32e40000 { + compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; + reg = <0x32e40000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <500000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_0_out: endpoint { + remote-endpoint = <&isi_in_0>; + }; + }; + }; + }; + + mipi_csi_1: csi@32e50000 { + compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; + reg = <0x32e50000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <266000000>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <266000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_1_out: endpoint { + remote-endpoint = <&isi_in_1>; + }; + }; + }; + }; + mipi_dsi: dsi@32e60000 { compatible = "fsl,imx8mp-mipi-dsim"; reg = <0x32e60000 0x400>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 200268660518..3ae3824be027 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -26,7 +26,7 @@ }; panel { - compatible = "innolux,n125hce-gn1", "simple-panel"; + compatible = "innolux,n125hce-gn1"; power-supply = <®_main_3v3>; backlight = <&backlight>; no-hpd; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index c5244b608524..afb3ceb06751 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -108,8 +108,6 @@ <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE1_PHY>, <&clk IMX8MQ_CLK_PCIE1_AUX>; - epdev_on-supply = <®_vcc_3v3>; - hard-wired = <1>; status = "okay"; }; @@ -122,8 +120,6 @@ <&pcie1_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, <&clk IMX8MQ_CLK_PCIE2_AUX>; - epdev_on-supply = <®_vcc_3v3>; - hard-wired = <1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 3a52679ecd68..cb777b47baf9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -177,7 +177,7 @@ port@2 { reg = <2>; - label = "cpu"; + phy-mode = "rev-rmii"; ethernet = <&fec1>; fixed-link { diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 0492556a10db..1a2d2c04db32 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -547,11 +547,13 @@ }; lcdif: lcd-controller@30320000 { - compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif"; reg = <0x30320000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>; - clock-names = "pix"; + clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>, + <&clk IMX8MQ_CLK_DISP_APB_ROOT>, + <&clk IMX8MQ_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_LCDIF_PIXEL>, @@ -1054,9 +1056,11 @@ }; }; - mipi_dsi: mipi-dsi@30a00000 { + mipi_dsi: dsi@30a00000 { compatible = "fsl,imx8mq-nwl-dsi"; reg = <0x30a00000 0x300>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&clk IMX8MQ_CLK_DSI_CORE>, <&clk IMX8MQ_CLK_DSI_AHB>, <&clk IMX8MQ_CLK_DSI_IPG_DIV>, @@ -1577,6 +1581,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + bus-range = <0x00 0xff>; ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 32193a43ff49..57627bdaa851 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -52,6 +52,7 @@ A35_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index fefb93487291..c50f46f06f62 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -116,6 +116,10 @@ no-mmc; }; +&wdog3 { + status = "okay"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index e8d49660ac85..8643612ace8c 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -46,12 +46,27 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <10000>; + exit-latency-us = <7000>; + min-residency-us = <27000>; + wakeup-latency-us = <15000>; + }; + }; + A55_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0>; enable-method = "psci"; #cooling-cells = <2>; + cpu-idle-states = <&cpu_pd_wait>; }; A55_1: cpu@100 { @@ -60,6 +75,7 @@ reg = <0x100>; enable-method = "psci"; #cooling-cells = <2>; + cpu-idle-states = <&cpu_pd_wait>; }; }; @@ -153,6 +169,24 @@ nxp,no-divider; }; + wdog1: watchdog@442d0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x442d0000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG1_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + wdog2: watchdog@442e0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x442e0000 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG2_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + tpm1: pwm@44310000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x44310000 0x1000>; @@ -287,14 +321,6 @@ #size-cells = <1>; ranges; - mediamix: power-domain@44462400 { - compatible = "fsl,imx93-src-slice"; - reg = <0x44462400 0x400>, <0x44465800 0x400>; - #power-domain-cells = <0>; - clocks = <&clk IMX93_CLK_MEDIA_AXI>, - <&clk IMX93_CLK_MEDIA_APB>; - }; - mlmix: power-domain@44461800 { compatible = "fsl,imx93-src-slice"; reg = <0x44461800 0x400>, <0x44464800 0x400>; @@ -302,6 +328,14 @@ clocks = <&clk IMX93_CLK_ML_APB>, <&clk IMX93_CLK_ML>; }; + + mediamix: power-domain@44462400 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; }; anatop: anatop@44480000 { @@ -344,6 +378,33 @@ status = "disabled"; }; + wdog3: watchdog@42490000 { + compatible = "fsl,imx93-wdt"; + reg = <0x42490000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG3_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + wdog4: watchdog@424a0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x424a0000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG4_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + wdog5: watchdog@424b0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x424b0000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG5_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + tpm3: pwm@424e0000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x424e0000 0x1000>; @@ -640,28 +701,6 @@ status = "disabled"; }; - eqos: ethernet@428a0000 { - compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; - reg = <0x428a0000 0x10000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, - <&clk IMX93_CLK_ENET_QOS_GATE>, - <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>, - <&clk IMX93_CLK_ENET_QOS_GATE>; - clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; - assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, - <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; - assigned-clock-rates = <100000000>, <250000000>; - intf_mode = <&wakeupmix_gpr 0x28>; - snps,clk-csr = <0>; - status = "disabled"; - }; - fec: ethernet@42890000 { compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x42890000 0x10000>; @@ -685,6 +724,29 @@ assigned-clock-rates = <100000000>, <250000000>, <50000000>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>; + status = "disabled"; + }; + + eqos: ethernet@428a0000 { + compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x428a0000 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, + <&clk IMX93_CLK_ENET_QOS_GATE>, + <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>, + <&clk IMX93_CLK_ENET_QOS_GATE>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; + assigned-clock-rates = <100000000>, <250000000>; + intf_mode = <&wakeupmix_gpr 0x28>; + snps,clk-csr = <0>; status = "disabled"; }; @@ -760,6 +822,13 @@ gpio-ranges = <&iomuxc 0 92 16>; }; + ocotp: efuse@47510000 { + compatible = "fsl,imx93-ocotp", "syscon"; + reg = <0x47510000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + }; + s4muap: mailbox@47520000 { compatible = "fsl,imx93-mu-s4"; reg = <0x47520000 0x10000>; @@ -788,5 +857,11 @@ #power-domain-cells = <1>; status = "disabled"; }; + + ddr-pmu@4e300dc0 { + compatible = "fsl,imx93-ddr-pmu"; + reg = <0x4e300dc0 0x200>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index d8c82da88ca0..5ac1cc9ff50e 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -53,11 +53,13 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi index 3e306218d533..42409ec56792 100644 --- a/arch/arm64/boot/dts/freescale/s32v234.dtsi +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -62,11 +62,13 @@ cluster0_l2_cache: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2_cache: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index a57f35eb5ef6..7e137a884ae5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -204,11 +204,13 @@ A53_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; A73_L2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index f6d3202b0d1a..b7e2cbf466b3 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -187,11 +187,13 @@ CLUSTER0_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CLUSTER1_L2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -407,7 +409,7 @@ compatible = "pinctrl-single"; reg = <0x0 0xf7010000 0x0 0x27c>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; #gpio-range-cells = <3>; pinctrl-single,register-width = <32>; @@ -446,7 +448,7 @@ compatible = "pinconf-single"; reg = <0x0 0xf7010800 0x0 0x28c>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; }; @@ -455,7 +457,7 @@ compatible = "pinconf-single"; reg = <0x0 0xf8001800 0x0 0x78>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi index e7d22619a4c0..3e27624c31de 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi @@ -17,13 +17,13 @@ &bl_pwm_pmx_func >; - boot_sel_pmx_func: boot_sel_pmx_func { + boot_sel_pmx_func: boot-sel-pins { pinctrl-single,pins = < 0x0 MUX_M0 /* BOOT_SEL (IOMG000) */ >; }; - emmc_pmx_func: emmc_pmx_func { + emmc_pmx_func: emmc-pins { pinctrl-single,pins = < 0x100 MUX_M0 /* EMMC_CLK (IOMG064) */ 0x104 MUX_M0 /* EMMC_CMD (IOMG065) */ @@ -38,7 +38,7 @@ >; }; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0xc MUX_M0 /* SD_CLK (IOMG003) */ 0x10 MUX_M0 /* SD_CMD (IOMG004) */ @@ -48,7 +48,7 @@ 0x20 MUX_M0 /* SD_DATA3 (IOMG008) */ >; }; - sd_pmx_idle: sd_pmx_idle { + sd_pmx_idle: sd-idle-pins { pinctrl-single,pins = < 0xc MUX_M1 /* SD_CLK (IOMG003) */ 0x10 MUX_M1 /* SD_CMD (IOMG004) */ @@ -59,7 +59,7 @@ >; }; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x128 MUX_M0 /* SDIO_CLK (IOMG074) */ 0x12c MUX_M0 /* SDIO_CMD (IOMG075) */ @@ -69,7 +69,7 @@ 0x13c MUX_M0 /* SDIO_DATA3 (IOMG079) */ >; }; - sdio_pmx_idle: sdio_pmx_idle { + sdio_pmx_idle: sdio-idle-pins { pinctrl-single,pins = < 0x128 MUX_M1 /* SDIO_CLK (IOMG074) */ 0x12c MUX_M1 /* SDIO_CMD (IOMG075) */ @@ -80,7 +80,7 @@ >; }; - isp_pmx_func: isp_pmx_func { + isp_pmx_func: isp-pins { pinctrl-single,pins = < 0x24 MUX_M0 /* ISP_PWDN0 (IOMG009) */ 0x28 MUX_M0 /* ISP_PWDN1 (IOMG010) */ @@ -101,19 +101,19 @@ >; }; - hkadc_ssi_pmx_func: hkadc_ssi_pmx_func { + hkadc_ssi_pmx_func: hkadc-ssi-pins { pinctrl-single,pins = < 0x68 MUX_M0 /* HKADC_SSI (IOMG026) */ >; }; - codec_clk_pmx_func: codec_clk_pmx_func { + codec_clk_pmx_func: codec-clk-pins { pinctrl-single,pins = < 0x6c MUX_M0 /* CODEC_CLK (IOMG027) */ >; }; - codec_pmx_func: codec_pmx_func { + codec_pmx_func: codec-pins { pinctrl-single,pins = < 0x70 MUX_M1 /* DMIC_CLK (IOMG028) */ 0x74 MUX_M0 /* CODEC_SYNC (IOMG029) */ @@ -122,7 +122,7 @@ >; }; - fm_pmx_func: fm_pmx_func { + fm_pmx_func: fm-pins { pinctrl-single,pins = < 0x80 MUX_M1 /* FM_XCLK (IOMG032) */ 0x84 MUX_M1 /* FM_XFS (IOMG033) */ @@ -131,7 +131,7 @@ >; }; - bt_pmx_func: bt_pmx_func { + bt_pmx_func: bt-pins { pinctrl-single,pins = < 0x90 MUX_M0 /* BT_XCLK (IOMG036) */ 0x94 MUX_M0 /* BT_XFS (IOMG037) */ @@ -140,26 +140,26 @@ >; }; - pwm_in_pmx_func: pwm_in_pmx_func { + pwm_in_pmx_func: pwm-in-pins { pinctrl-single,pins = < 0xb8 MUX_M1 /* PWM_IN (IOMG046) */ >; }; - bl_pwm_pmx_func: bl_pwm_pmx_func { + bl_pwm_pmx_func: bl-pwm-pins { pinctrl-single,pins = < 0xbc MUX_M1 /* BL_PWM (IOMG047) */ >; }; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0xc0 MUX_M0 /* UART0_RXD (IOMG048) */ 0xc4 MUX_M0 /* UART0_TXD (IOMG049) */ >; }; - uart1_pmx_func: uart1_pmx_func { + uart1_pmx_func: uart1-pins { pinctrl-single,pins = < 0xc8 MUX_M0 /* UART1_CTS_N (IOMG050) */ 0xcc MUX_M0 /* UART1_RTS_N (IOMG051) */ @@ -168,7 +168,7 @@ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0xd8 MUX_M0 /* UART2_CTS_N (IOMG054) */ 0xdc MUX_M0 /* UART2_RTS_N (IOMG055) */ @@ -177,7 +177,7 @@ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x180 MUX_M1 /* UART3_CTS_N (IOMG096) */ 0x184 MUX_M1 /* UART3_RTS_N (IOMG097) */ @@ -186,7 +186,7 @@ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x1d0 MUX_M1 /* UART4_CTS_N (IOMG116) */ 0x1d4 MUX_M1 /* UART4_RTS_N (IOMG117) */ @@ -195,35 +195,35 @@ >; }; - uart5_pmx_func: uart5_pmx_func { + uart5_pmx_func: uart5-pins { pinctrl-single,pins = < 0x1c8 MUX_M1 /* UART5_RXD (IOMG114) */ 0x1cc MUX_M1 /* UART5_TXD (IOMG115) */ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0xe8 MUX_M0 /* I2C0_SCL (IOMG058) */ 0xec MUX_M0 /* I2C0_SDA (IOMG059) */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0xf0 MUX_M0 /* I2C1_SCL (IOMG060) */ 0xf4 MUX_M0 /* I2C1_SDA (IOMG061) */ >; }; - i2c2_pmx_func: i2c2_pmx_func { + i2c2_pmx_func: i2c2-pins { pinctrl-single,pins = < 0xf8 MUX_M0 /* I2C2_SCL (IOMG062) */ 0xfc MUX_M0 /* I2C2_SDA (IOMG063) */ >; }; - spi0_pmx_func: spi0_pmx_func { + spi0_pmx_func: spi0-pins { pinctrl-single,pins = < 0x1a0 MUX_M1 /* SPI0_DI (IOMG104) */ 0x1a4 MUX_M1 /* SPI0_DO (IOMG105) */ @@ -244,7 +244,7 @@ &bl_pwm_cfg_func >; - boot_sel_cfg_func: boot_sel_cfg_func { + boot_sel_cfg_func: boot-sel-cfg-pins { pinctrl-single,pins = < 0x0 0x0 /* BOOT_SEL (IOCFG000) */ >; @@ -253,7 +253,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - hkadc_ssi_cfg_func: hkadc_ssi_cfg_func { + hkadc_ssi_cfg_func: hkadc-ssi-cfg-pins { pinctrl-single,pins = < 0x6c 0x0 /* HKADC_SSI (IOCFG027) */ >; @@ -262,7 +262,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - emmc_clk_cfg_func: emmc_clk_cfg_func { + emmc_clk_cfg_func: emmc-clk-cfg-pins { pinctrl-single,pins = < 0x104 0x0 /* EMMC_CLK (IOCFG065) */ >; @@ -271,7 +271,7 @@ pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - emmc_cfg_func: emmc_cfg_func { + emmc_cfg_func: emmc-cfg-pins { pinctrl-single,pins = < 0x108 0x0 /* EMMC_CMD (IOCFG066) */ 0x10c 0x0 /* EMMC_DATA0 (IOCFG067) */ @@ -288,7 +288,7 @@ pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - emmc_rst_cfg_func: emmc_rst_cfg_func { + emmc_rst_cfg_func: emmc-rst-cfg-pins { pinctrl-single,pins = < 0x12c 0x0 /* EMMC_RST_N (IOCFG075) */ >; @@ -297,7 +297,7 @@ pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - sd_clk_cfg_func: sd_clk_cfg_func { + sd_clk_cfg_func: sd-clk-cfg-pins { pinctrl-single,pins = < 0xc 0x0 /* SD_CLK (IOCFG003) */ >; @@ -305,7 +305,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>; }; - sd_clk_cfg_idle: sd_clk_cfg_idle { + sd_clk_cfg_idle: sd-clk-cfg-idle-pins { pinctrl-single,pins = < 0xc 0x0 /* SD_CLK (IOCFG003) */ >; @@ -314,7 +314,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sd_cfg_func: sd_cfg_func { + sd_cfg_func: sd-cfg-pins { pinctrl-single,pins = < 0x10 0x0 /* SD_CMD (IOCFG004) */ 0x14 0x0 /* SD_DATA0 (IOCFG005) */ @@ -326,7 +326,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - sd_cfg_idle: sd_cfg_idle { + sd_cfg_idle: sd-cfg-idle-pins { pinctrl-single,pins = < 0x10 0x0 /* SD_CMD (IOCFG004) */ 0x14 0x0 /* SD_DATA0 (IOCFG005) */ @@ -339,7 +339,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sdio_clk_cfg_func: sdio_clk_cfg_func { + sdio_clk_cfg_func: sdio-clk-cfg-pins { pinctrl-single,pins = < 0x134 0x0 /* SDIO_CLK (IOCFG077) */ >; @@ -347,7 +347,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - sdio_clk_cfg_idle: sdio_clk_cfg_idle { + sdio_clk_cfg_idle: sdio-clk-cfg-idle-pins { pinctrl-single,pins = < 0x134 0x0 /* SDIO_CLK (IOCFG077) */ >; @@ -356,7 +356,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x138 0x0 /* SDIO_CMD (IOCFG078) */ 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ @@ -368,7 +368,7 @@ pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - sdio_cfg_idle: sdio_cfg_idle { + sdio_cfg_idle: sdio-cfg-idle-pins { pinctrl-single,pins = < 0x138 0x0 /* SDIO_CMD (IOCFG078) */ 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ @@ -381,7 +381,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - isp_cfg_func1: isp_cfg_func1 { + isp_cfg_func1: isp-cfg-func1-pins { pinctrl-single,pins = < 0x28 0x0 /* ISP_PWDN0 (IOCFG010) */ 0x2c 0x0 /* ISP_PWDN1 (IOCFG011) */ @@ -403,7 +403,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - isp_cfg_idle1: isp_cfg_idle1 { + isp_cfg_idle1: isp-cfg-idle1-pins { pinctrl-single,pins = < 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ @@ -413,7 +413,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - isp_cfg_func2: isp_cfg_func2 { + isp_cfg_func2: isp-cfg-func2-pins { pinctrl-single,pins = < 0x54 0x0 /* ISP_STROBE1 (IOCFG021) */ >; @@ -422,7 +422,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - codec_clk_cfg_func: codec_clk_cfg_func { + codec_clk_cfg_func: codec-clk-cfg-pins { pinctrl-single,pins = < 0x70 0x0 /* CODEC_CLK (IOCFG028) */ >; @@ -430,7 +430,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - codec_clk_cfg_idle: codec_clk_cfg_idle { + codec_clk_cfg_idle: codec-clk-cfg-idle-pins { pinctrl-single,pins = < 0x70 0x0 /* CODEC_CLK (IOCFG028) */ >; @@ -439,7 +439,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - codec_cfg_func1: codec_cfg_func1 { + codec_cfg_func1: codec-cfg-func1-pins { pinctrl-single,pins = < 0x74 0x0 /* DMIC_CLK (IOCFG029) */ >; @@ -448,7 +448,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - codec_cfg_func2: codec_cfg_func2 { + codec_cfg_func2: codec-cfg-func2-pins { pinctrl-single,pins = < 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ 0x7c 0x0 /* CODEC_DI (IOCFG031) */ @@ -458,7 +458,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - codec_cfg_idle2: codec_cfg_idle2 { + codec_cfg_idle2: codec-cfg-idle2-pins { pinctrl-single,pins = < 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ 0x7c 0x0 /* CODEC_DI (IOCFG031) */ @@ -469,7 +469,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - fm_cfg_func: fm_cfg_func { + fm_cfg_func: fm-cfg-pins { pinctrl-single,pins = < 0x84 0x0 /* FM_XCLK (IOCFG033) */ 0x88 0x0 /* FM_XFS (IOCFG034) */ @@ -481,7 +481,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - bt_cfg_func: bt_cfg_func { + bt_cfg_func: bt-cfg-pins { pinctrl-single,pins = < 0x94 0x0 /* BT_XCLK (IOCFG037) */ 0x98 0x0 /* BT_XFS (IOCFG038) */ @@ -492,7 +492,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - bt_cfg_idle: bt_cfg_idle { + bt_cfg_idle: bt-cfg-idle-pins { pinctrl-single,pins = < 0x94 0x0 /* BT_XCLK (IOCFG037) */ 0x98 0x0 /* BT_XFS (IOCFG038) */ @@ -504,7 +504,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - pwm_in_cfg_func: pwm_in_cfg_func { + pwm_in_cfg_func: pwm-in-cfg-pins { pinctrl-single,pins = < 0xbc 0x0 /* PWM_IN (IOCFG047) */ >; @@ -513,7 +513,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - bl_pwm_cfg_func: bl_pwm_cfg_func { + bl_pwm_cfg_func: bl-pwm-cfg-pins { pinctrl-single,pins = < 0xc0 0x0 /* BL_PWM (IOCFG048) */ >; @@ -522,7 +522,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart0_cfg_func1: uart0_cfg_func1 { + uart0_cfg_func1: uart0-cfg-func1-pins { pinctrl-single,pins = < 0xc4 0x0 /* UART0_RXD (IOCFG049) */ >; @@ -531,7 +531,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart0_cfg_func2: uart0_cfg_func2 { + uart0_cfg_func2: uart0-cfg-func2-pins { pinctrl-single,pins = < 0xc8 0x0 /* UART0_TXD (IOCFG050) */ >; @@ -540,7 +540,7 @@ pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - uart1_cfg_func1: uart1_cfg_func1 { + uart1_cfg_func1: uart1-cfg-func1-pins { pinctrl-single,pins = < 0xcc 0x0 /* UART1_CTS_N (IOCFG051) */ 0xd4 0x0 /* UART1_RXD (IOCFG053) */ @@ -550,7 +550,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart1_cfg_func2: uart1_cfg_func2 { + uart1_cfg_func2: uart1-cfg-func2-pins { pinctrl-single,pins = < 0xd0 0x0 /* UART1_RTS_N (IOCFG052) */ 0xd8 0x0 /* UART1_TXD (IOCFG054) */ @@ -560,7 +560,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0xdc 0x0 /* UART2_CTS_N (IOCFG055) */ 0xe0 0x0 /* UART2_RTS_N (IOCFG056) */ @@ -572,7 +572,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x190 0x0 /* UART3_CTS_N (IOCFG100) */ 0x194 0x0 /* UART3_RTS_N (IOCFG101) */ @@ -584,7 +584,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x1e0 0x0 /* UART4_CTS_N (IOCFG120) */ 0x1e4 0x0 /* UART4_RTS_N (IOCFG121) */ @@ -596,7 +596,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart5_cfg_func: uart5_cfg_func { + uart5_cfg_func: uart5-cfg-pins { pinctrl-single,pins = < 0x1d8 0x0 /* UART4_RXD (IOCFG118) */ 0x1dc 0x0 /* UART4_TXD (IOCFG119) */ @@ -606,7 +606,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0xec 0x0 /* I2C0_SCL (IOCFG059) */ 0xf0 0x0 /* I2C0_SDA (IOCFG060) */ @@ -616,7 +616,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0xf4 0x0 /* I2C1_SCL (IOCFG061) */ 0xf8 0x0 /* I2C1_SDA (IOCFG062) */ @@ -626,7 +626,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - i2c2_cfg_func: i2c2_cfg_func { + i2c2_cfg_func: i2c2-cfg-pins { pinctrl-single,pins = < 0xfc 0x0 /* I2C2_SCL (IOCFG063) */ 0x100 0x0 /* I2C2_SDA (IOCFG064) */ @@ -636,7 +636,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - spi0_cfg_func: spi0_cfg_func { + spi0_cfg_func: spi0-cfg-pins { pinctrl-single,pins = < 0x1b0 0x0 /* SPI0_DI (IOCFG108) */ 0x1b4 0x0 /* SPI0_DO (IOCFG109) */ @@ -656,7 +656,7 @@ &rstout_n_cfg_func >; - rstout_n_cfg_func: rstout_n_cfg_func { + rstout_n_cfg_func: rstout-n-cfg-pins { pinctrl-single,pins = < 0x0 0x0 /* RSTOUT_N (IOCFG000) */ >; @@ -665,7 +665,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - pmu_peri_en_cfg_func: pmu_peri_en_cfg_func { + pmu_peri_en_cfg_func: pmu-peri-en-cfg-pins { pinctrl-single,pins = < 0x4 0x0 /* PMU_PERI_EN (IOCFG001) */ >; @@ -674,7 +674,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sysclk0_en_cfg_func: sysclk0_en_cfg_func { + sysclk0_en_cfg_func: sysclk0-en-cfg-pins { pinctrl-single,pins = < 0x8 0x0 /* SYSCLK0_EN (IOCFG002) */ >; @@ -683,7 +683,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - jtag_tdo_cfg_func: jtag_tdo_cfg_func { + jtag_tdo_cfg_func: jtag-tdo-cfg-pins { pinctrl-single,pins = < 0xc 0x0 /* JTAG_TDO (IOCFG003) */ >; @@ -692,7 +692,7 @@ pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - rf_reset_cfg_func: rf_reset_cfg_func { + rf_reset_cfg_func: rf-reset-cfg-pins { pinctrl-single,pins = < 0x70 0x0 /* RF_RESET0 (IOCFG028) */ 0x74 0x0 /* RF_RESET1 (IOCFG029) */ diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi index 920a3111c66d..b801a48041f9 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi @@ -25,7 +25,7 @@ &range 0 7 0 &range 8 116 0>; - pmu_pmx_func: pmu_pmx_func { + pmu_pmx_func: pmu-pins { pinctrl-single,pins = < 0x008 MUX_M1 /* PMU1_SSI */ 0x00c MUX_M1 /* PMU2_SSI */ @@ -34,19 +34,19 @@ >; }; - csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func { + csi0_pwd_n_pmx_func: csi0-pwd-n-pins { pinctrl-single,pins = < 0x044 MUX_M0 /* CSI0_PWD_N */ >; }; - csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func { + csi1_pwd_n_pmx_func: csi1-pwd-n-pins { pinctrl-single,pins = < 0x04c MUX_M0 /* CSI1_PWD_N */ >; }; - isp0_pmx_func: isp0_pmx_func { + isp0_pmx_func: isp0-pins { pinctrl-single,pins = < 0x058 MUX_M1 /* ISP_CLK0 */ 0x064 MUX_M1 /* ISP_SCL0 */ @@ -54,7 +54,7 @@ >; }; - isp1_pmx_func: isp1_pmx_func { + isp1_pmx_func: isp1-pins { pinctrl-single,pins = < 0x05c MUX_M1 /* ISP_CLK1 */ 0x06c MUX_M1 /* ISP_SCL1 */ @@ -62,47 +62,47 @@ >; }; - pwr_key_pmx_func: pwr_key_pmx_func { + pwr_key_pmx_func: pwr-key-pins { pinctrl-single,pins = < 0x080 MUX_M0 /* GPIO_034 */ >; }; - i2c3_pmx_func: i2c3_pmx_func { + i2c3_pmx_func: i2c3-pins { pinctrl-single,pins = < 0x02c MUX_M1 /* I2C3_SCL */ 0x030 MUX_M1 /* I2C3_SDA */ >; }; - i2c4_pmx_func: i2c4_pmx_func { + i2c4_pmx_func: i2c4-pins { pinctrl-single,pins = < 0x090 MUX_M1 /* I2C4_SCL */ 0x094 MUX_M1 /* I2C4_SDA */ >; }; - pcie_perstn_pmx_func: pcie_perstn_pmx_func { + pcie_perstn_pmx_func: pcie-perstn-pins { pinctrl-single,pins = < 0x15c MUX_M1 /* PCIE_PERST_N */ >; }; - usbhub5734_pmx_func: usbhub5734_pmx_func { + usbhub5734_pmx_func: usbhub5734-pins { pinctrl-single,pins = < 0x11c MUX_M0 /* GPIO_073 */ 0x120 MUX_M0 /* GPIO_074 */ >; }; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0x0cc MUX_M2 /* UART0_RXD */ 0x0d0 MUX_M2 /* UART0_TXD */ >; }; - uart1_pmx_func: uart1_pmx_func { + uart1_pmx_func: uart1-pins { pinctrl-single,pins = < 0x0b0 MUX_M2 /* UART1_CTS_N */ 0x0b4 MUX_M2 /* UART1_RTS_N */ @@ -111,7 +111,7 @@ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0x0bc MUX_M2 /* UART2_CTS_N */ 0x0c0 MUX_M2 /* UART2_RTS_N */ @@ -120,7 +120,7 @@ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x0dc MUX_M1 /* UART3_CTS_N */ 0x0e0 MUX_M1 /* UART3_RTS_N */ @@ -129,7 +129,7 @@ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x0ec MUX_M1 /* UART4_CTS_N */ 0x0f0 MUX_M1 /* UART4_RTS_N */ @@ -138,7 +138,7 @@ >; }; - uart5_pmx_func: uart5_pmx_func { + uart5_pmx_func: uart5-pins { pinctrl-single,pins = < 0x0c4 MUX_M3 /* UART5_CTS_N */ 0x0c8 MUX_M3 /* UART5_RTS_N */ @@ -147,7 +147,7 @@ >; }; - uart6_pmx_func: uart6_pmx_func { + uart6_pmx_func: uart6-pins { pinctrl-single,pins = < 0x0cc MUX_M1 /* UART6_CTS_N */ 0x0d0 MUX_M1 /* UART6_RTS_N */ @@ -156,13 +156,13 @@ >; }; - cam0_rst_pmx_func: cam0_rst_pmx_func { + cam0_rst_pmx_func: cam0-rst-pins { pinctrl-single,pins = < 0x0c8 MUX_M0 /* CAM0_RST */ >; }; - cam1_rst_pmx_func: cam1_rst_pmx_func { + cam1_rst_pmx_func: cam1-rst-pins { pinctrl-single,pins = < 0x124 MUX_M0 /* CAM1_RST */ >; @@ -180,7 +180,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 6 0>; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SD_CLK */ 0x004 MUX_M1 /* SD_CMD */ @@ -203,14 +203,14 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; - ufs_pmx_func: ufs_pmx_func { + ufs_pmx_func: ufs-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* UFS_REF_CLK */ 0x004 MUX_M1 /* UFS_RST_N */ >; }; - spi3_pmx_func: spi3_pmx_func { + spi3_pmx_func: spi3-pins { pinctrl-single,pins = < 0x008 MUX_M1 /* SPI3_CLK */ 0x00c MUX_M1 /* SPI3_DI */ @@ -231,7 +231,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 6 0>; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SDIO_CLK */ 0x004 MUX_M1 /* SDIO_CMD */ @@ -254,7 +254,7 @@ /* pin base in node, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 42 0>; - i2s2_pmx_func: i2s2_pmx_func { + i2s2_pmx_func: i2s2-pins { pinctrl-single,pins = < 0x044 MUX_M1 /* I2S2_DI */ 0x048 MUX_M1 /* I2S2_DO */ @@ -263,42 +263,42 @@ >; }; - slimbus_pmx_func: slimbus_pmx_func { + slimbus_pmx_func: slimbus-pins { pinctrl-single,pins = < 0x02c MUX_M1 /* SLIMBUS_CLK */ 0x030 MUX_M1 /* SLIMBUS_DATA */ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0x014 MUX_M1 /* I2C0_SCL */ 0x018 MUX_M1 /* I2C0_SDA */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0x01c MUX_M1 /* I2C1_SCL */ 0x020 MUX_M1 /* I2C1_SDA */ >; }; - i2c7_pmx_func: i2c7_pmx_func { + i2c7_pmx_func: i2c7-pins { pinctrl-single,pins = < 0x024 MUX_M3 /* I2C7_SCL */ 0x028 MUX_M3 /* I2C7_SDA */ >; }; - pcie_pmx_func: pcie_pmx_func { + pcie_pmx_func: pcie-pins { pinctrl-single,pins = < 0x084 MUX_M1 /* PCIE_CLKREQ_N */ 0x088 MUX_M1 /* PCIE_WAKE_N */ >; }; - spi2_pmx_func: spi2_pmx_func { + spi2_pmx_func: spi2-pins { pinctrl-single,pins = < 0x08c MUX_M1 /* SPI2_CLK */ 0x090 MUX_M1 /* SPI2_DI */ @@ -307,7 +307,7 @@ >; }; - i2s0_pmx_func: i2s0_pmx_func { + i2s0_pmx_func: i2s0-pins { pinctrl-single,pins = < 0x034 MUX_M1 /* I2S0_DI */ 0x038 MUX_M1 /* I2S0_DO */ @@ -323,7 +323,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - pmu_cfg_func: pmu_cfg_func { + pmu_cfg_func: pmu-cfg-pins { pinctrl-single,pins = < 0x010 0x0 /* PMU1_SSI */ 0x014 0x0 /* PMU2_SSI */ @@ -347,7 +347,7 @@ >; }; - i2c3_cfg_func: i2c3_cfg_func { + i2c3_cfg_func: i2c3-cfg-pins { pinctrl-single,pins = < 0x038 0x0 /* I2C3_SCL */ 0x03c 0x0 /* I2C3_SDA */ @@ -369,7 +369,7 @@ >; }; - csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func { + csi0_pwd_n_cfg_func: csi0-pwd-n-cfg-pins { pinctrl-single,pins = < 0x050 0x0 /* CSI0_PWD_N */ >; @@ -390,7 +390,7 @@ >; }; - csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func { + csi1_pwd_n_cfg_func: csi1-pwd-n-cfg-pins { pinctrl-single,pins = < 0x058 0x0 /* CSI1_PWD_N */ >; @@ -411,7 +411,7 @@ >; }; - isp0_cfg_func: isp0_cfg_func { + isp0_cfg_func: isp0-cfg-pins { pinctrl-single,pins = < 0x064 0x0 /* ISP_CLK0 */ 0x070 0x0 /* ISP_SCL0 */ @@ -433,7 +433,7 @@ DRIVE7_04MA DRIVE6_MASK>; }; - isp1_cfg_func: isp1_cfg_func { + isp1_cfg_func: isp1-cfg-pins { pinctrl-single,pins = < 0x068 0x0 /* ISP_CLK1 */ 0x078 0x0 /* ISP_SCL1 */ @@ -456,7 +456,7 @@ >; }; - pwr_key_cfg_func: pwr_key_cfg_func { + pwr_key_cfg_func: pwr-key-cfg-pins { pinctrl-single,pins = < 0x08c 0x0 /* GPIO_034 */ >; @@ -477,7 +477,7 @@ >; }; - uart1_cfg_func: uart1_cfg_func { + uart1_cfg_func: uart1-cfg-pins { pinctrl-single,pins = < 0x0b4 0x0 /* UART1_RXD */ 0x0b8 0x0 /* UART1_TXD */ @@ -501,7 +501,7 @@ >; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0x0c8 0x0 /* UART2_CTS_N */ 0x0cc 0x0 /* UART2_RTS_N */ @@ -525,7 +525,7 @@ >; }; - uart5_cfg_func: uart5_cfg_func { + uart5_cfg_func: uart5-cfg-pins { pinctrl-single,pins = < 0x0c8 0x0 /* UART5_RXD */ 0x0cc 0x0 /* UART5_TXD */ @@ -549,7 +549,7 @@ >; }; - cam0_rst_cfg_func: cam0_rst_cfg_func { + cam0_rst_cfg_func: cam0-rst-cfg-pins { pinctrl-single,pins = < 0x0d4 0x0 /* CAM0_RST */ >; @@ -570,7 +570,7 @@ >; }; - uart0_cfg_func: uart0_cfg_func { + uart0_cfg_func: uart0-cfg-pins { pinctrl-single,pins = < 0x0d8 0x0 /* UART0_RXD */ 0x0dc 0x0 /* UART0_TXD */ @@ -592,7 +592,7 @@ >; }; - uart6_cfg_func: uart6_cfg_func { + uart6_cfg_func: uart6-cfg-pins { pinctrl-single,pins = < 0x0d8 0x0 /* UART6_CTS_N */ 0x0dc 0x0 /* UART6_RTS_N */ @@ -616,7 +616,7 @@ >; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x0e8 0x0 /* UART3_CTS_N */ 0x0ec 0x0 /* UART3_RTS_N */ @@ -640,7 +640,7 @@ >; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x0f8 0x0 /* UART4_CTS_N */ 0x0fc 0x0 /* UART4_RTS_N */ @@ -664,7 +664,7 @@ >; }; - cam1_rst_cfg_func: cam1_rst_cfg_func { + cam1_rst_cfg_func: cam1-rst-cfg-pins { pinctrl-single,pins = < 0x130 0x0 /* CAM1_RST */ >; @@ -692,7 +692,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - ufs_cfg_func: ufs_cfg_func { + ufs_cfg_func: ufs-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* UFS_REF_CLK */ 0x004 0x0 /* UFS_RST_N */ @@ -714,7 +714,7 @@ >; }; - spi3_cfg_func: spi3_cfg_func { + spi3_cfg_func: spi3-cfg-pins { pinctrl-single,pins = < 0x008 0x0 /* SPI3_CLK */ 0x00c 0x0 /* SPI3_DI */ @@ -745,7 +745,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sdio_clk_cfg_func: sdio_clk_cfg_func { + sdio_clk_cfg_func: sdio-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SDIO_CLK */ >; @@ -766,7 +766,7 @@ >; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SDIO_CMD */ 0x008 0x0 /* SDIO_DATA0 */ @@ -798,7 +798,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sd_clk_cfg_func: sd_clk_cfg_func { + sd_clk_cfg_func: sd-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SD_CLK */ >; @@ -820,7 +820,7 @@ >; }; - sd_cfg_func: sd_cfg_func { + sd_cfg_func: sd-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SD_CMD */ 0x008 0x0 /* SD_DATA0 */ @@ -853,7 +853,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0x01c 0x0 /* I2C0_SCL */ 0x020 0x0 /* I2C0_SDA */ @@ -875,7 +875,7 @@ >; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0x024 0x0 /* I2C1_SCL */ 0x028 0x0 /* I2C1_SDA */ @@ -897,7 +897,7 @@ >; }; - i2c7_cfg_func: i2c7_cfg_func { + i2c7_cfg_func: i2c7-cfg-pins { pinctrl-single,pins = < 0x02c 0x0 /* I2C7_SCL */ 0x030 0x0 /* I2C7_SDA */ @@ -919,7 +919,7 @@ >; }; - slimbus_cfg_func: slimbus_cfg_func { + slimbus_cfg_func: slimbus-cfg-pins { pinctrl-single,pins = < 0x034 0x0 /* SLIMBUS_CLK */ 0x038 0x0 /* SLIMBUS_DATA */ @@ -941,7 +941,7 @@ >; }; - i2s0_cfg_func: i2s0_cfg_func { + i2s0_cfg_func: i2s0-cfg-pins { pinctrl-single,pins = < 0x040 0x0 /* I2S0_DI */ 0x044 0x0 /* I2S0_DO */ @@ -965,7 +965,7 @@ >; }; - i2s2_cfg_func: i2s2_cfg_func { + i2s2_cfg_func: i2s2-cfg-pins { pinctrl-single,pins = < 0x050 0x0 /* I2S2_DI */ 0x054 0x0 /* I2S2_DO */ @@ -989,7 +989,7 @@ >; }; - pcie_cfg_func: pcie_cfg_func { + pcie_cfg_func: pcie-cfg-pins { pinctrl-single,pins = < 0x094 0x0 /* PCIE_CLKREQ_N */ 0x098 0x0 /* PCIE_WAKE_N */ @@ -1011,7 +1011,7 @@ >; }; - spi2_cfg_func: spi2_cfg_func { + spi2_cfg_func: spi2-cfg-pins { pinctrl-single,pins = < 0x09c 0x0 /* SPI2_CLK */ 0x0a0 0x0 /* SPI2_DI */ @@ -1035,7 +1035,7 @@ >; }; - usb_cfg_func: usb_cfg_func { + usb_cfg_func: usb-cfg-pins { pinctrl-single,pins = < 0x0ac 0x0 /* GPIO_219 */ >; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index 77bd8c3a8314..8f7bf80e6ece 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -21,14 +21,14 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 82 0>; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0x054 MUX_M2 /* UART0_RXD */ 0x058 MUX_M2 /* UART0_TXD */ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0x700 MUX_M2 /* UART2_CTS_N */ 0x704 MUX_M2 /* UART2_RTS_N */ @@ -37,7 +37,7 @@ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x064 MUX_M1 /* UART3_CTS_N */ 0x068 MUX_M1 /* UART3_RTS_N */ @@ -46,7 +46,7 @@ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x074 MUX_M1 /* UART4_CTS_N */ 0x078 MUX_M1 /* UART4_RTS_N */ @@ -55,52 +55,52 @@ >; }; - uart6_pmx_func: uart6_pmx_func { + uart6_pmx_func: uart6-pins { pinctrl-single,pins = < 0x05c MUX_M1 /* UART6_RXD */ 0x060 MUX_M1 /* UART6_TXD */ >; }; - i2c3_pmx_func: i2c3_pmx_func { + i2c3_pmx_func: i2c3-pins { pinctrl-single,pins = < 0x010 MUX_M1 /* I2C3_SCL */ 0x014 MUX_M1 /* I2C3_SDA */ >; }; - i2c4_pmx_func: i2c4_pmx_func { + i2c4_pmx_func: i2c4-pins { pinctrl-single,pins = < 0x03c MUX_M1 /* I2C4_SCL */ 0x040 MUX_M1 /* I2C4_SDA */ >; }; - cam0_rst_pmx_func: cam0_rst_pmx_func { + cam0_rst_pmx_func: cam0-rst-pins { pinctrl-single,pins = < 0x714 MUX_M0 /* CAM0_RST */ >; }; - cam1_rst_pmx_func: cam1_rst_pmx_func { + cam1_rst_pmx_func: cam1-rst-pins { pinctrl-single,pins = < 0x048 MUX_M0 /* CAM1_RST */ >; }; - cam0_pwd_n_pmx_func: cam0_pwd_n_pmx_func { + cam0_pwd_n_pmx_func: cam0-pwd-n-pins { pinctrl-single,pins = < 0x098 MUX_M0 /* CAM0_PWD_N */ >; }; - cam1_pwd_n_pmx_func: cam1_pwd_n_pmx_func { + cam1_pwd_n_pmx_func: cam1-pwd-n-pins { pinctrl-single,pins = < 0x044 MUX_M0 /* CAM1_PWD_N */ >; }; - isp0_pmx_func: isp0_pmx_func { + isp0_pmx_func: isp0-pins { pinctrl-single,pins = < 0x018 MUX_M1 /* ISP_CLK0 */ 0x024 MUX_M1 /* ISP_SCL0 */ @@ -108,7 +108,7 @@ >; }; - isp1_pmx_func: isp1_pmx_func { + isp1_pmx_func: isp1-pins { pinctrl-single,pins = < 0x01c MUX_M1 /* ISP_CLK1 */ 0x02c MUX_M1 /* ISP_SCL1 */ @@ -127,19 +127,19 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 46 0>; - pwr_key_pmx_func: pwr_key_pmx_func { + pwr_key_pmx_func: pwr-key-pins { pinctrl-single,pins = < 0x064 MUX_M0 /* GPIO_203 */ >; }; - pd_pmx_func: pd_pmx_func{ + pd_pmx_func: pd-pins { pinctrl-single,pins = < 0x080 MUX_M0 /* GPIO_221 */ >; }; - i2s2_pmx_func: i2s2_pmx_func { + i2s2_pmx_func: i2s2-pins { pinctrl-single,pins = < 0x050 MUX_M1 /* I2S2_DI */ 0x054 MUX_M1 /* I2S2_DO */ @@ -148,7 +148,7 @@ >; }; - spi0_pmx_func: spi0_pmx_func { + spi0_pmx_func: spi0-pins { pinctrl-single,pins = < 0x094 MUX_M1 /* SPI0_CLK */ 0x098 MUX_M1 /* SPI0_DI */ @@ -157,7 +157,7 @@ >; }; - spi2_pmx_func: spi2_pmx_func { + spi2_pmx_func: spi2-pins { pinctrl-single,pins = < 0x710 MUX_M1 /* SPI2_CLK */ 0x714 MUX_M1 /* SPI2_DI */ @@ -166,7 +166,7 @@ >; }; - spi3_pmx_func: spi3_pmx_func { + spi3_pmx_func: spi3-pins { pinctrl-single,pins = < 0x72c MUX_M1 /* SPI3_CLK */ 0x730 MUX_M1 /* SPI3_DI */ @@ -175,37 +175,37 @@ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0x020 MUX_M1 /* I2C0_SCL */ 0x024 MUX_M1 /* I2C0_SDA */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0x028 MUX_M1 /* I2C1_SCL */ 0x02c MUX_M1 /* I2C1_SDA */ >; }; - i2c2_pmx_func: i2c2_pmx_func { + i2c2_pmx_func: i2c2-pins { pinctrl-single,pins = < 0x030 MUX_M1 /* I2C2_SCL */ 0x034 MUX_M1 /* I2C2_SDA */ >; }; - pcie_clkreq_pmx_func: pcie_clkreq_pmx_func { + pcie_clkreq_pmx_func: pcie-clkreq-pins { pinctrl-single,pins = < 0x084 MUX_M1 /* PCIE0_CLKREQ_N */ >; }; - gpio185_pmx_func: gpio185_pmx_func { + gpio185_pmx_func: gpio185-pins { pinctrl-single,pins = <0x01C 0x1>; }; - gpio185_pmx_idle: gpio185_pmx_idle { + gpio185_pmx_idle: gpio185-idle-pins { pinctrl-single,pins = <0x01C 0x0>; }; }; @@ -216,7 +216,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - uart0_cfg_func: uart0_cfg_func { + uart0_cfg_func: uart0-cfg-pins { pinctrl-single,pins = < 0x058 0x0 /* UART0_RXD */ 0x05c 0x0 /* UART0_TXD */ @@ -238,7 +238,7 @@ >; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0x700 0x0 /* UART2_CTS_N */ 0x704 0x0 /* UART2_RTS_N */ @@ -262,7 +262,7 @@ >; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x068 0x0 /* UART3_CTS_N */ 0x06c 0x0 /* UART3_RTS_N */ @@ -286,7 +286,7 @@ >; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x078 0x0 /* UART4_CTS_N */ 0x07c 0x0 /* UART4_RTS_N */ @@ -310,7 +310,7 @@ >; }; - uart6_cfg_func: uart6_cfg_func { + uart6_cfg_func: uart6-cfg-pins { pinctrl-single,pins = < 0x060 0x0 /* UART6_RXD */ 0x064 0x0 /* UART6_TXD */ @@ -332,7 +332,7 @@ >; }; - i2c3_cfg_func: i2c3_cfg_func { + i2c3_cfg_func: i2c3-cfg-pins { pinctrl-single,pins = < 0x014 0x0 /* I2C3_SCL */ 0x018 0x0 /* I2C3_SDA */ @@ -354,7 +354,7 @@ >; }; - i2c4_cfg_func: i2c4_cfg_func { + i2c4_cfg_func: i2c4-cfg-pins { pinctrl-single,pins = < 0x040 0x0 /* I2C4_SCL */ 0x044 0x0 /* I2C4_SDA */ @@ -376,7 +376,7 @@ >; }; - cam0_rst_cfg_func: cam0_rst_cfg_func { + cam0_rst_cfg_func: cam0-rst-cfg-pins { pinctrl-single,pins = < 0x714 0x0 /* CAM0_RST */ >; @@ -397,7 +397,7 @@ >; }; - cam1_rst_cfg_func: cam1_rst_cfg_func { + cam1_rst_cfg_func: cam1-rst-cfg-pins { pinctrl-single,pins = < 0x04C 0x0 /* CAM1_RST */ >; @@ -418,7 +418,7 @@ >; }; - cam0_pwd_n_cfg_func: cam0_pwd_n_cfg_func { + cam0_pwd_n_cfg_func: cam0-pwd-n-cfg-pins { pinctrl-single,pins = < 0x09C 0x0 /* CAM0_PWD_N */ >; @@ -439,7 +439,7 @@ >; }; - cam1_pwd_n_cfg_func: cam1_pwd_n_cfg_func { + cam1_pwd_n_cfg_func: cam1-pwd-n-cfg-pins { pinctrl-single,pins = < 0x048 0x0 /* CAM1_PWD_N */ >; @@ -460,7 +460,7 @@ >; }; - isp0_cfg_func: isp0_cfg_func { + isp0_cfg_func: isp0-cfg-pins { pinctrl-single,pins = < 0x01C 0x0 /* ISP_CLK0 */ 0x028 0x0 /* ISP_SCL0 */ @@ -483,7 +483,7 @@ >; }; - isp1_cfg_func: isp1_cfg_func { + isp1_cfg_func: isp1-cfg-pins { pinctrl-single,pins = < 0x020 0x0 /* ISP_CLK1 */ 0x030 0x0 /* ISP_SCL1 */ @@ -517,7 +517,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 10 0>; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SDIO_CLK */ 0x004 MUX_M1 /* SDIO_CMD */ @@ -535,7 +535,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sdio_clk_cfg_func: sdio_clk_cfg_func { + sdio_clk_cfg_func: sdio-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SDIO_CLK */ >; @@ -556,7 +556,7 @@ >; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SDIO_CMD */ 0x008 0x0 /* SDIO_DATA0 */ @@ -592,7 +592,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SD_CLK */ 0x004 MUX_M1 /* SD_CMD */ @@ -610,7 +610,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sd_clk_cfg_func: sd_clk_cfg_func { + sd_clk_cfg_func: sd-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SD_CLK */ >; @@ -632,7 +632,7 @@ >; }; - sd_cfg_func: sd_cfg_func { + sd_cfg_func: sd-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SD_CMD */ 0x008 0x0 /* SD_DATA0 */ @@ -665,7 +665,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - pwr_key_cfg_func: pwr_key_cfg_func { + pwr_key_cfg_func: pwr-key-cfg-pins { pinctrl-single,pins = < 0x090 0x0 /* GPIO_203 */ >; @@ -686,7 +686,7 @@ >; }; - usb_cfg_func: usb_cfg_func { + usb_cfg_func: usb-cfg-pins { pinctrl-single,pins = < 0x0AC 0x0 /* GPIO_221 */ >; @@ -707,7 +707,7 @@ >; }; - spi0_cfg_func: spi0_cfg_func { + spi0_cfg_func: spi0-cfg-pins { pinctrl-single,pins = < 0x0c8 0x0 /* SPI0_DI */ 0x0cc 0x0 /* SPI0_DO */ @@ -730,7 +730,7 @@ >; }; - spi2_cfg_func: spi2_cfg_func { + spi2_cfg_func: spi2-cfg-pins { pinctrl-single,pins = < 0x714 0x0 /* SPI2_DI */ 0x718 0x0 /* SPI2_DO */ @@ -753,7 +753,7 @@ >; }; - spi3_cfg_func: spi3_cfg_func { + spi3_cfg_func: spi3-cfg-pins { pinctrl-single,pins = < 0x730 0x0 /* SPI3_DI */ 0x734 0x0 /* SPI3_DO */ @@ -776,7 +776,7 @@ >; }; - spi0_clk_cfg_func: spi0_clk_cfg_func { + spi0_clk_cfg_func: spi0-clk-cfg-pins { pinctrl-single,pins = < 0x0c4 0x0 /* SPI0_CLK */ >; @@ -797,7 +797,7 @@ >; }; - spi2_clk_cfg_func: spi2_clk_cfg_func { + spi2_clk_cfg_func: spi2-clk-cfg-pins { pinctrl-single,pins = < 0x710 0x0 /* SPI2_CLK */ >; @@ -818,7 +818,7 @@ >; }; - spi3_clk_cfg_func: spi3_clk_cfg_func { + spi3_clk_cfg_func: spi3-clk-cfg-pins { pinctrl-single,pins = < 0x72c 0x0 /* SPI3_CLK */ >; @@ -839,7 +839,7 @@ >; }; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0x04c 0x0 /* I2C0_SCL */ 0x050 0x0 /* I2C0_SDA */ @@ -861,7 +861,7 @@ >; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0x054 0x0 /* I2C1_SCL */ 0x058 0x0 /* I2C1_SDA */ @@ -883,7 +883,7 @@ >; }; - i2c2_cfg_func: i2c2_cfg_func { + i2c2_cfg_func: i2c2-cfg-pins { pinctrl-single,pins = < 0x05c 0x0 /* I2C2_SCL */ 0x060 0x0 /* I2C2_SDA */ @@ -905,7 +905,7 @@ >; }; - pcie_clkreq_cfg_func: pcie_clkreq_cfg_func { + pcie_clkreq_cfg_func: pcie-clkreq-cfg-pins { pinctrl-single,pins = < 0x0b0 0x0 >; @@ -925,7 +925,7 @@ DRIVE7_06MA DRIVE6_MASK >; }; - i2s2_cfg_func: i2s2_cfg_func { + i2s2_cfg_func: i2s2-cfg-pins { pinctrl-single,pins = < 0x07c 0x0 /* I2S2_DI */ 0x080 0x0 /* I2S2_DO */ @@ -949,7 +949,7 @@ >; }; - gpio185_cfg_func: gpio185_cfg_func { + gpio185_cfg_func: gpio185-cfg-pins { pinctrl-single,pins = <0x048 0>; pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; @@ -957,7 +957,7 @@ pinctrl-single,slew-rate = <0x0 0x80>; }; - gpio185_cfg_idle: gpio185_cfg_idle { + gpio185_cfg_idle: gpio185-cfg-idle-pins { pinctrl-single,pins = <0x048 0>; pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 5b2b1bfd0d2a..65ddc0698f82 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -212,21 +212,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 291c2ee38288..c588848bfdeb 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -212,21 +212,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 8a9436ca2531..595abe339c5d 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -843,81 +843,97 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster4_l2: l2-cache4 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster5_l2: l2-cache5 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster6_l2: l2-cache6 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster7_l2: l2-cache7 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster8_l2: l2-cache8 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster9_l2: l2-cache9 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster10_l2: l2-cache10 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster11_l2: l2-cache11 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster12_l2: l2-cache12 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster13_l2: l2-cache13 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster14_l2: l2-cache14 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster15_l2: l2-cache15 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 8bce64069138..c9ce1010c415 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -50,6 +50,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index d29d2da95f4c..f9abef8dcc94 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -24,6 +24,8 @@ ethernet5 = &switch0port4; }; + /delete-node/ regulator; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3-vbus"; @@ -66,6 +68,7 @@ }; &sdhci1 { + /delete-property/ vqmmc-supply; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index ca1aeb69a892..c864df9ec84d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -135,7 +135,7 @@ pinctrl-0 = <&cp0_i2c1_pins>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts index eb0473503936..42a60f3dd5d1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -285,7 +285,7 @@ pinctrl-0 = <&cp0_i2c1_pins>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9544"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 990f70303fe6..3ed6fba1f438 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -52,6 +52,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index a7b8e001cc9c..cf6a96ddcf40 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -82,6 +82,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; }; l2_1: l2-cache1 { @@ -90,6 +91,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi index 7740098fd108..8848238f9565 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -82,6 +82,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; }; l2_1: l2-cache1 { @@ -90,6 +91,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 0cc9ee9871e7..4ec1aae0a3a9 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -468,7 +468,7 @@ status = "disabled"; }; - CP11X_LABEL(nand_controller): nand@720000 { + CP11X_LABEL(nand_controller): nand-controller@720000 { /* * Due to the limitation of the pins available * this controller is only usable on the CPM diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index d31a194124c9..fffdb7bbf889 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -11,6 +11,7 @@ / { model = "MediaTek MT2712 evaluation board"; + chassis-type = "embedded"; compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi new file mode 100644 index 000000000000..d89858c73ab1 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2023 Collabora Ltd. + * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + */ +#include <dt-bindings/input/input.h> + +&pwrap { + pmic: mt6331 { + compatible = "mediatek,mt6331"; + interrupt-controller; + #interrupt-cells = <2>; + + mt6331regulator: mt6331regulator { + compatible = "mediatek,mt6331-regulator"; + + mt6331_vdvfs11_reg: buck-vdvfs11 { + regulator-name = "vdvfs11"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + + mt6331_vdvfs12_reg: buck-vdvfs12 { + regulator-name = "vdvfs12"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + + mt6331_vdvfs13_reg: buck-vdvfs13 { + regulator-name = "vdvfs13"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + + mt6331_vdvfs14_reg: buck-vdvfs14 { + regulator-name = "vdvfs14"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + + mt6331_vcore2_reg: buck-vcore2 { + regulator-name = "vcore2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + + mt6331_vio18_reg: buck-vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + + mt6331_vtcxo1_reg: ldo-vtcxo1 { + regulator-name = "vtcxo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_vtcxo2_reg: ldo-vtcxo2 { + regulator-name = "vtcxo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_avdd32_aud_reg: ldo-avdd32aud { + regulator-name = "avdd32_aud"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_vauxa32_reg: ldo-vauxa32 { + regulator-name = "vauxa32"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vio28_reg: ldo-vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_vcamaf_reg: ldo-vcamaf { + regulator-name = "vcam_af"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vemc33_reg: ldo-vemc33 { + regulator-name = "vemc33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vgp1_reg: ldo-vgp1 { + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vmipi_reg: ldo-vmipi { + regulator-name = "vmipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vgp4_reg: ldo-vgp4 { + regulator-name = "vgp4"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <2200000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vusb10_reg: ldo-vusb10 { + regulator-name = "vusb"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_vcamio_reg: ldo-vcamio { + regulator-name = "vcam_io"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + }; + + mt6331_vsram_reg: ldo-vsram { + regulator-name = "vsram"; + regulator-min-microvolt = <1012500>; + regulator-max-microvolt = <1012500>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_vgp2_reg: ldo-vgp2 { + regulator-name = "vgp2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6331_vgp3_reg: ldo-vgp3 { + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vrtc_reg: ldo-vrtc { + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + mt6331_vdig18_reg: ldo-vdig18 { + regulator-name = "dvdd18_dig"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + }; + + mt6331rtc: mt6331rtc { + compatible = "mediatek,mt6331-rtc"; + }; + + mt6331keys: mt6331keys { + compatible = "mediatek,mt6331-keys"; + power { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + home { + linux,keycodes = <KEY_HOME>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts index e079b7932ba3..00b14f85c6a1 100644 --- a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts @@ -9,6 +9,7 @@ / { model = "MediaTek MT6755 EVB"; + chassis-type = "embedded"; compatible = "mediatek,mt6755-evb", "mediatek,mt6755"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts index 164f5cbb3821..56b1bf06e26b 100644 --- a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts @@ -10,6 +10,7 @@ / { model = "MediaTek MT6779 EVB"; + chassis-type = "embedded"; compatible = "mediatek,mt6779-evb", "mediatek,mt6779"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts index 1ed2f81edeff..e0d4d7a63139 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts @@ -9,6 +9,7 @@ / { model = "MediaTek MT6795 Evaluation Board"; + chassis-type = "embedded"; compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts index 507b5b567a36..b5746e6d0b15 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include "mt6795.dtsi" +#include "mt6331.dtsi" / { model = "Sony Xperia M5"; @@ -16,6 +17,7 @@ aliases { mmc0 = &mmc0; mmc1 = &mmc1; + mmc2 = &mmc2; serial0 = &uart0; serial1 = &uart1; }; @@ -132,7 +134,97 @@ }; }; +&mmc0 { + /* eMMC controller */ + mediatek,latch-ck = <0x14>; /* hs400 */ + mediatek,hs200-cmd-int-delay = <1>; + mediatek,hs400-cmd-int-delay = <1>; + mediatek,hs400-ds-dly3 = <0x1a>; + non-removable; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <&mt6331_vemc33_reg>; + vqmmc-supply = <&mt6331_vio18_reg>; + status = "okay"; +}; + +&mmc1 { + /* MicroSD card slot */ + vmmc-supply = <&mt6331_vmc_reg>; + vqmmc-supply = <&mt6331_vmch_reg>; + status = "okay"; +}; + +&mmc2 { + /* SDIO WiFi on MMC2 */ + vmmc-supply = <&mt6331_vmc_reg>; + vqmmc-supply = <&mt6331_vmch_reg>; + status = "okay"; +}; + &pio { + mmc0_pins_default: emmc-sdr-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO162__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + mmc0_pins_uhs: emmc-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO162__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + nfc_pins: nfc-pins { pins-irq { pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; @@ -239,6 +331,15 @@ }; }; +&pmic { + /* + * Smartphones, including the Xperia M5, are equipped with a companion + * MT6332 PMIC: when this is present, the main MT6331 PMIC will fire + * an interrupt on the companion, so we use the MT6332 IRQ GPIO. + */ + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; +}; + &uart0 { status = "okay"; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index 17019fbea0af..597bce2fed72 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -7,6 +7,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mediatek,mt6795-clk.h> +#include <dt-bindings/gce/mediatek,mt6795-gce.h> +#include <dt-bindings/memory/mt6795-larb-port.h> #include <dt-bindings/pinctrl/mt6795-pinfunc.h> #include <dt-bindings/power/mt6795-power.h> #include <dt-bindings/reset/mediatek,mt6795-resets.h> @@ -372,6 +374,17 @@ clocks = <&system_clk>, <&clk32k>; }; + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt6795-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + resets = <&infracfg MT6795_INFRA_RST0_PMIC_WRAP_RST>; + reset-names = "pwrap"; + clocks = <&topckgen CLK_TOP_PMICSPI_SEL>, <&clk26m>; + clock-names = "spi", "wrap"; + }; + sysirq: intpol-controller@10200620 { compatible = "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq"; @@ -389,6 +402,17 @@ clock-names = "clk13m"; }; + iommu: iommu@10205000 { + compatible = "mediatek,mt6795-m4u"; + reg = <0 0x10205000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; + mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + #iommu-cells = <1>; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt6795-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; @@ -401,6 +425,15 @@ status = "disabled"; }; + gce: mailbox@10212000 { + compatible = "mediatek,mt6795-gce", "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + #mbox-cells = <2>; + }; + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -644,16 +677,77 @@ status = "disabled"; }; + mmsys: syscon@14000000 { + compatible = "mediatek,mt6795-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + assigned-clocks = <&topckgen CLK_TOP_MM_SEL>; + assigned-clock-rates = <400000000>; + #clock-cells = <1>; + #reset-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; + }; + + larb0: larb@14021000 { + compatible = "mediatek,mt6795-smi-larb"; + reg = <0 0x14021000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + }; + + smi_common: smi@14022000 { + compatible = "mediatek,mt6795-smi-common"; + reg = <0 0x14022000 0 0x1000>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&infracfg CLK_INFRA_SMI>, <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt6795-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi"; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; + power-domains = <&spm MT6795_POWER_DOMAIN_ISP>; + }; + vdecsys: clock-controller@16000000 { compatible = "mediatek,mt6795-vdecsys"; reg = <0 0x16000000 0 0x1000>; #clock-cells = <1>; }; + larb1: larb@16010000 { + compatible = "mediatek,mt6795-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; + clocks = <&vdecsys CLK_VDEC_CKEN>, <&vdecsys CLK_VDEC_LARB_CKEN>; + clock-names = "apb", "smi"; + power-domains = <&spm MT6795_POWER_DOMAIN_VDEC>; + }; + vencsys: clock-controller@18000000 { compatible = "mediatek,mt6795-vencsys"; reg = <0 0x18000000 0 0x1000>; #clock-cells = <1>; }; + + larb3: larb@18001000 { + compatible = "mediatek,mt6795-smi-larb"; + reg = <0 0x18001000 0 0x1000>; + clocks = <&vencsys CLK_VENC_VENC>, <&vencsys CLK_VENC_LARB>; + clock-names = "apb", "smi"; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <3>; + power-domains = <&spm MT6795_POWER_DOMAIN_VENC>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts index 2327e752d164..c927932afa0d 100644 --- a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts @@ -9,6 +9,7 @@ / { model = "MediaTek MT6797 Evaluation Board"; + chassis-type = "embedded"; compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts index eff9e8dbd076..9534cf3a09d0 100644 --- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts +++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts @@ -12,6 +12,7 @@ / { model = "Mediatek X20 Development Board"; + chassis-type = "embedded"; compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index af3fe61e4093..e4605d23fdc8 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -15,6 +15,7 @@ / { model = "Bananapi BPI-R64"; + chassis-type = "embedded"; compatible = "bananapi,bpi-r64", "mediatek,mt7622"; aliases { @@ -150,6 +151,10 @@ switch@0 { compatible = "mediatek,mt7531"; reg = <0>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 54 0>; ports { @@ -248,14 +253,42 @@ status = "disabled"; }; -&nor_flash { - pinctrl-names = "default"; - pinctrl-0 = <&spi_nor_pins>; - status = "disabled"; +&bch { + status = "okay"; +}; +&snfi { + pinctrl-names = "default"; + pinctrl-0 = <&serial_nand_pins>; + status = "okay"; flash@0 { - compatible = "jedec,spi-nor"; + compatible = "spi-nand"; reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + nand-ecc-engine = <&snfi>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "fip"; + reg = <0x80000 0x200000>; + read-only; + }; + + ubi: partition@280000 { + label = "ubi"; + reg = <0x280000 0x7d80000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index b74e774c6eba..dad8e683aac5 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -15,6 +15,7 @@ / { model = "MediaTek MT7622 RFB1 board"; + chassis-type = "embedded"; compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 006cd639059f..36ef2dbe8add 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -101,6 +101,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso index 15ee8c568f3c..543c13385d6e 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso @@ -29,13 +29,13 @@ partition@0 { label = "bl2"; - reg = <0x0 0x80000>; + reg = <0x0 0x100000>; read-only; }; - partition@80000 { + partition@100000 { label = "reserved"; - reg = <0x80000 0x300000>; + reg = <0x100000 0x280000>; }; partition@380000 { diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso index 84aa229e80f3..e48881be4ed6 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso @@ -27,15 +27,10 @@ partition@0 { label = "bl2"; - reg = <0x0 0x20000>; + reg = <0x0 0x40000>; read-only; }; - partition@20000 { - label = "reserved"; - reg = <0x20000 0x20000>; - }; - partition@40000 { label = "u-boot-env"; reg = <0x40000 0x40000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index 33bd6febc160..af4a4309bda4 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -16,6 +16,7 @@ / { model = "Bananapi BPI-R3"; + chassis-type = "embedded"; compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; aliases { @@ -37,6 +38,15 @@ regulator-always-on; }; + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + /* cooling level (0, 1, 2) - pwm inverted */ + cooling-levels = <255 96 0>; + pwms = <&pwm 0 10000 0>; + status = "okay"; + }; + gpio-keys { compatible = "gpio-keys"; @@ -132,6 +142,28 @@ }; }; +&cpu_thermal { + cooling-maps { + cpu-active-high { + /* active: set fan to cooling level 2 */ + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_active_high>; + }; + + cpu-active-low { + /* active: set fan to cooling level 1 */ + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active_low>; + }; + + cpu-passive { + /* passive: set fan to cooling level 0 */ + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; +}; + &crypto { status = "okay"; }; @@ -274,6 +306,13 @@ }; }; + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0", "pwm1_0"; + }; + }; + spi_flash_pins: spi-flash-pins { mux { function = "spi"; @@ -344,6 +383,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi_flash_pins>; @@ -446,5 +491,9 @@ pinctrl-names = "default", "dbdc"; pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>; pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>; + + led { + led-active-low; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts index 4f18b4a9a8c8..3ef371ca254e 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts @@ -11,6 +11,7 @@ / { model = "MediaTek MT7986a RFB"; + chassis-type = "embedded"; compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index 51944690e790..68539ea788df 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -240,6 +240,20 @@ status = "disabled"; }; + pwm: pwm@10048000 { + compatible = "mediatek,mt7986-pwm"; + reg = <0 0x10048000 0 0x1000>; + #clock-cells = <1>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&infracfg CLK_INFRA_PWM_STA>, + <&infracfg CLK_INFRA_PWM1_CK>, + <&infracfg CLK_INFRA_PWM2_CK>; + clock-names = "top", "main", "pwm1", "pwm2"; + status = "disabled"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt7986-uart", "mediatek,mt6577-uart"; @@ -323,6 +337,15 @@ status = "disabled"; }; + auxadc: adc@1100d000 { + compatible = "mediatek,mt7986-auxadc"; + reg = <0 0x1100d000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + ssusb: usb@11200000 { compatible = "mediatek,mt7986-xhci", "mediatek,mtk-xhci"; @@ -361,6 +384,21 @@ status = "disabled"; }; + thermal: thermal@1100c800 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt7986-thermal"; + reg = <0 0x1100c800 0 0x800>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_THERM_CK>, + <&infracfg CLK_INFRA_ADC_26M_CK>, + <&infracfg CLK_INFRA_ADC_FRC_CK>; + clock-names = "therm", "auxadc", "adc_32k"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + pcie: pcie@11280000 { compatible = "mediatek,mt7986-pcie", "mediatek,mt8192-pcie"; @@ -412,6 +450,17 @@ }; }; + efuse: efuse@11d00000 { + compatible = "mediatek,mt7986-efuse", "mediatek,efuse"; + reg = <0 0x11d00000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + thermal_calibration: calib@274 { + reg = <0x274 0xc>; + }; + }; + usb_phy: t-phy@11e10000 { compatible = "mediatek,mt7986-tphy", "mediatek,generic-tphy-v2"; @@ -554,4 +603,31 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&thermal 0>; + + trips { + cpu_trip_active_high: active-high { + temperature = <115000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_active_low: active-low { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <40000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts index 188ce82ae56c..dde190442e38 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts @@ -9,6 +9,7 @@ / { model = "MediaTek MT7986b RFB"; + chassis-type = "embedded"; compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts index 774a2f3fb4b2..ebf1a358f42a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts @@ -11,6 +11,7 @@ / { model = "Pumpkin MT8167"; + chassis-type = "embedded"; compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167"; memory@40000000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts index 28433b94f7c7..256f245ac01d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts @@ -8,6 +8,7 @@ / { model = "Google Hanawl"; + chassis-type = "laptop"; compatible = "google,hana-rev7", "mediatek,mt8173"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts index c234296755e1..fcf0cb76a87c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts @@ -8,6 +8,7 @@ / { model = "Google Hana"; + chassis-type = "laptop"; compatible = "google,hana-rev6", "google,hana-rev5", "google,hana-rev4", "google,hana-rev3", "google,hana", "mediatek,mt8173"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts index e9e4ac0b74b2..2390d04204e8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts @@ -8,6 +8,7 @@ / { model = "Google Elm"; + chassis-type = "laptop"; compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", "google,elm", "mediatek,mt8173"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index d77f6af19065..111495622cac 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -96,6 +96,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; + regulator-boot-on; + off-on-delay-us = <500000>; gpio = <&pio 41 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&panel_fixed_pins>; @@ -285,7 +287,7 @@ aux-bus { panel: panel { - compatible = "lg,lp120up1"; + compatible = "edp-panel"; power-supply = <&panel_fixed_3v3>; backlight = <&backlight>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 755df5694234..5122963d8743 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -10,6 +10,7 @@ / { model = "MediaTek MT8173 evaluation board"; + chassis-type = "embedded"; compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 3e3f4b1b00f0..d8bd51807683 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -11,6 +11,7 @@ / { model = "MediaTek MT8183 evaluation board"; + chassis-type = "embedded"; compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts index 1a2ec0787d3c..19c1e2bee494 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts @@ -9,6 +9,7 @@ / { model = "Google burnet board"; + chassis-type = "convertible"; compatible = "google,burnet", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts index 0eca3ff8672a..552bfc726999 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -9,6 +9,7 @@ / { model = "Google damu board"; + chassis-type = "convertible"; compatible = "google,damu", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts index bc2c57f0a827..8ac6bf5b17f9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts @@ -9,6 +9,7 @@ / { model = "Google juniper sku16 board"; + chassis-type = "convertible"; compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts index 3a724e6f915c..fcce8ea1232e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts @@ -9,6 +9,7 @@ / { model = "MediaTek kakadu board sku22"; + chassis-type = "tablet"; compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22", "google,kakadu", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts index 89a139a0ee44..ebfabba72507 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -9,6 +9,7 @@ / { model = "MediaTek kakadu board"; + chassis-type = "tablet"; compatible = "google,kakadu-rev3", "google,kakadu-rev2", "google,kakadu", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts index e3dd75bdaea4..7213cdcca612 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts @@ -12,6 +12,7 @@ / { model = "MediaTek kodama sku16 board"; + chassis-type = "tablet"; compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts index d81935ae07bc..bbf0cd1aa66d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts @@ -12,6 +12,7 @@ / { model = "MediaTek kodama sku272 board"; + chassis-type = "tablet"; compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts index f4082fbe0517..a429ffeac3bd 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts @@ -12,6 +12,7 @@ / { model = "MediaTek kodama sku288 board"; + chassis-type = "tablet"; compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts index fb5ee91b6fe0..4ac75806fa94 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts @@ -14,6 +14,7 @@ / { model = "MediaTek krane sku0 board"; + chassis-type = "tablet"; compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts index 721d16f9c3b4..095279e55d50 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts @@ -14,6 +14,7 @@ / { model = "MediaTek krane sku176 board"; + chassis-type = "tablet"; compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 63952c1251df..6ce16a265e05 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -292,6 +292,10 @@ }; }; +&gic { + mediatek,broken-save-restore-fw; +}; + &gpu { mali-supply = <&mt6358_vgpu_reg>; }; @@ -822,6 +826,8 @@ &scp { status = "okay"; + + firmware-name = "mediatek/mt8183/scp.img"; pinctrl-names = "default"; pinctrl-0 = <&scp_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts index ed74a3617c13..2667a7424200 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts @@ -7,6 +7,7 @@ / { model = "MediaTek MT8186 evaluation board"; + chassis-type = "embedded"; compatible = "mediatek,mt8186-evb", "mediatek,mt8186"; aliases { diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index 5e83d4e9efa4..f04ae70c470a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -5,6 +5,7 @@ */ /dts-v1/; #include <dt-bindings/clock/mt8186-clk.h> +#include <dt-bindings/gce/mt8186-gce.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/memory/mt8186-memory-port.h> @@ -19,6 +20,308 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + ovl0 = &ovl0; + ovl_2l0 = &ovl_2l0; + rdma0 = &rdma0; + rdma1 = &rdma1; + }; + + cci: cci { + compatible = "mediatek,mt8186-cci"; + clocks = <&mcusys CLK_MCU_ARMPLL_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + + cci_opp_0: opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <600000>; + }; + + cci_opp_1: opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-microvolt = <675000>; + }; + + cci_opp_2: opp-612000000 { + opp-hz = /bits/ 64 <612000000>; + opp-microvolt = <693750>; + }; + + cci_opp_3: opp-682000000 { + opp-hz = /bits/ 64 <682000000>; + opp-microvolt = <718750>; + }; + + cci_opp_4: opp-752000000 { + opp-hz = /bits/ 64 <752000000>; + opp-microvolt = <743750>; + }; + + cci_opp_5: opp-822000000 { + opp-hz = /bits/ 64 <822000000>; + opp-microvolt = <768750>; + }; + + cci_opp_6: opp-875000000 { + opp-hz = /bits/ 64 <875000000>; + opp-microvolt = <781250>; + }; + + cci_opp_7: opp-927000000 { + opp-hz = /bits/ 64 <927000000>; + opp-microvolt = <800000>; + }; + + cci_opp_8: opp-980000000 { + opp-hz = /bits/ 64 <980000000>; + opp-microvolt = <818750>; + }; + + cci_opp_9: opp-1050000000 { + opp-hz = /bits/ 64 <1050000000>; + opp-microvolt = <843750>; + }; + + cci_opp_10: opp-1120000000 { + opp-hz = /bits/ 64 <1120000000>; + opp-microvolt = <862500>; + }; + + cci_opp_11: opp-1155000000 { + opp-hz = /bits/ 64 <1155000000>; + opp-microvolt = <887500>; + }; + + cci_opp_12: opp-1190000000 { + opp-hz = /bits/ 64 <1190000000>; + opp-microvolt = <906250>; + }; + + cci_opp_13: opp-1260000000 { + opp-hz = /bits/ 64 <1260000000>; + opp-microvolt = <950000>; + }; + + cci_opp_14: opp-1330000000 { + opp-hz = /bits/ 64 <1330000000>; + opp-microvolt = <993750>; + }; + + cci_opp_15: opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1031250>; + }; + }; + + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <600000>; + required-opps = <&cci_opp_0>; + }; + + opp-774000000 { + opp-hz = /bits/ 64 <774000000>; + opp-microvolt = <675000>; + required-opps = <&cci_opp_1>; + }; + + opp-875000000 { + opp-hz = /bits/ 64 <875000000>; + opp-microvolt = <700000>; + required-opps = <&cci_opp_2>; + }; + + opp-975000000 { + opp-hz = /bits/ 64 <975000000>; + opp-microvolt = <725000>; + required-opps = <&cci_opp_3>; + }; + + opp-1075000000 { + opp-hz = /bits/ 64 <1075000000>; + opp-microvolt = <750000>; + required-opps = <&cci_opp_4>; + }; + + opp-1175000000 { + opp-hz = /bits/ 64 <1175000000>; + opp-microvolt = <775000>; + required-opps = <&cci_opp_5>; + }; + + opp-1275000000 { + opp-hz = /bits/ 64 <1275000000>; + opp-microvolt = <800000>; + required-opps = <&cci_opp_6>; + }; + + opp-1375000000 { + opp-hz = /bits/ 64 <1375000000>; + opp-microvolt = <825000>; + required-opps = <&cci_opp_7>; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <856250>; + required-opps = <&cci_opp_8>; + }; + + opp-1618000000 { + opp-hz = /bits/ 64 <1618000000>; + opp-microvolt = <875000>; + required-opps = <&cci_opp_9>; + }; + + opp-1666000000 { + opp-hz = /bits/ 64 <1666000000>; + opp-microvolt = <900000>; + required-opps = <&cci_opp_10>; + }; + + opp-1733000000 { + opp-hz = /bits/ 64 <1733000000>; + opp-microvolt = <925000>; + required-opps = <&cci_opp_11>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <950000>; + required-opps = <&cci_opp_12>; + }; + + opp-1866000000 { + opp-hz = /bits/ 64 <1866000000>; + opp-microvolt = <981250>; + required-opps = <&cci_opp_13>; + }; + + opp-1933000000 { + opp-hz = /bits/ 64 <1933000000>; + opp-microvolt = <1006250>; + required-opps = <&cci_opp_14>; + }; + + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <1031250>; + required-opps = <&cci_opp_15>; + }; + }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-774000000 { + opp-hz = /bits/ 64 <774000000>; + opp-microvolt = <675000>; + required-opps = <&cci_opp_0>; + }; + + opp-835000000 { + opp-hz = /bits/ 64 <835000000>; + opp-microvolt = <693750>; + required-opps = <&cci_opp_1>; + }; + + opp-919000000 { + opp-hz = /bits/ 64 <919000000>; + opp-microvolt = <718750>; + required-opps = <&cci_opp_2>; + }; + + opp-1002000000 { + opp-hz = /bits/ 64 <1002000000>; + opp-microvolt = <743750>; + required-opps = <&cci_opp_3>; + }; + + opp-1085000000 { + opp-hz = /bits/ 64 <1085000000>; + opp-microvolt = <775000>; + required-opps = <&cci_opp_4>; + }; + + opp-1169000000 { + opp-hz = /bits/ 64 <1169000000>; + opp-microvolt = <800000>; + required-opps = <&cci_opp_5>; + }; + + opp-1308000000 { + opp-hz = /bits/ 64 <1308000000>; + opp-microvolt = <843750>; + required-opps = <&cci_opp_6>; + }; + + opp-1419000000 { + opp-hz = /bits/ 64 <1419000000>; + opp-microvolt = <875000>; + required-opps = <&cci_opp_7>; + }; + + opp-1530000000 { + opp-hz = /bits/ 64 <1530000000>; + opp-microvolt = <912500>; + required-opps = <&cci_opp_8>; + }; + + opp-1670000000 { + opp-hz = /bits/ 64 <1670000000>; + opp-microvolt = <956250>; + required-opps = <&cci_opp_9>; + }; + + opp-1733000000 { + opp-hz = /bits/ 64 <1733000000>; + opp-microvolt = <981250>; + required-opps = <&cci_opp_10>; + }; + + opp-1796000000 { + opp-hz = /bits/ 64 <1796000000>; + opp-microvolt = <1012500>; + required-opps = <&cci_opp_11>; + }; + + opp-1860000000 { + opp-hz = /bits/ 64 <1860000000>; + opp-microvolt = <1037500>; + required-opps = <&cci_opp_12>; + }; + + opp-1923000000 { + opp-hz = /bits/ 64 <1923000000>; + opp-microvolt = <1062500>; + required-opps = <&cci_opp_13>; + }; + + cluster1_opp_14: opp-1986000000 { + opp-hz = /bits/ 64 <1986000000>; + opp-microvolt = <1093750>; + required-opps = <&cci_opp_14>; + }; + + cluster1_opp_15: opp-2050000000 { + opp-hz = /bits/ 64 <2050000000>; + opp-microvolt = <1118750>; + required-opps = <&cci_opp_15>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +368,11 @@ reg = <0x000>; enable-method = "psci"; clock-frequency = <2000000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + dynamic-power-coefficient = <84>; capacity-dmips-mhz = <382>; cpu-idle-states = <&cpu_ret_l &cpu_off_l>; i-cache-size = <32768>; @@ -75,6 +383,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu1: cpu@100 { @@ -83,6 +392,11 @@ reg = <0x100>; enable-method = "psci"; clock-frequency = <2000000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + dynamic-power-coefficient = <84>; capacity-dmips-mhz = <382>; cpu-idle-states = <&cpu_ret_l &cpu_off_l>; i-cache-size = <32768>; @@ -93,6 +407,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu2: cpu@200 { @@ -101,6 +416,11 @@ reg = <0x200>; enable-method = "psci"; clock-frequency = <2000000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + dynamic-power-coefficient = <84>; capacity-dmips-mhz = <382>; cpu-idle-states = <&cpu_ret_l &cpu_off_l>; i-cache-size = <32768>; @@ -111,6 +431,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu3: cpu@300 { @@ -119,6 +440,11 @@ reg = <0x300>; enable-method = "psci"; clock-frequency = <2000000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + dynamic-power-coefficient = <84>; capacity-dmips-mhz = <382>; cpu-idle-states = <&cpu_ret_l &cpu_off_l>; i-cache-size = <32768>; @@ -129,6 +455,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu4: cpu@400 { @@ -137,6 +464,11 @@ reg = <0x400>; enable-method = "psci"; clock-frequency = <2000000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + dynamic-power-coefficient = <84>; capacity-dmips-mhz = <382>; cpu-idle-states = <&cpu_ret_l &cpu_off_l>; i-cache-size = <32768>; @@ -147,6 +479,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu5: cpu@500 { @@ -155,6 +488,11 @@ reg = <0x500>; enable-method = "psci"; clock-frequency = <2000000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + dynamic-power-coefficient = <84>; capacity-dmips-mhz = <382>; cpu-idle-states = <&cpu_ret_l &cpu_off_l>; i-cache-size = <32768>; @@ -165,6 +503,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu6: cpu@600 { @@ -173,6 +512,11 @@ reg = <0x600>; enable-method = "psci"; clock-frequency = <2050000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; + dynamic-power-coefficient = <335>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_ret_b &cpu_off_b>; i-cache-size = <65536>; @@ -183,6 +527,7 @@ d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu7: cpu@700 { @@ -191,6 +536,11 @@ reg = <0x700>; enable-method = "psci"; clock-frequency = <2050000000>; + clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; + dynamic-power-coefficient = <335>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_ret_b &cpu_off_b>; i-cache-size = <65536>; @@ -201,6 +551,7 @@ d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; idle-states { @@ -250,6 +601,7 @@ cache-line-size = <64>; cache-sets = <512>; next-level-cache = <&l3_0>; + cache-unified; }; l2_1: l2-cache1 { @@ -259,6 +611,7 @@ cache-line-size = <64>; cache-sets = <512>; next-level-cache = <&l3_0>; + cache-unified; }; l3_0: l3-cache { @@ -294,6 +647,142 @@ clock-output-names = "clk32k"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-299000000 { + opp-hz = /bits/ 64 <299000000>; + opp-microvolt = <612500>; + opp-supported-hw = <0xff>; + }; + + opp-332000000 { + opp-hz = /bits/ 64 <332000000>; + opp-microvolt = <625000>; + opp-supported-hw = <0xff>; + }; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + opp-microvolt = <637500>; + opp-supported-hw = <0xff>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <643750>; + opp-supported-hw = <0xff>; + }; + + opp-434000000 { + opp-hz = /bits/ 64 <434000000>; + opp-microvolt = <656250>; + opp-supported-hw = <0xff>; + }; + + opp-484000000 { + opp-hz = /bits/ 64 <484000000>; + opp-microvolt = <668750>; + opp-supported-hw = <0xff>; + }; + + opp-535000000 { + opp-hz = /bits/ 64 <535000000>; + opp-microvolt = <687500>; + opp-supported-hw = <0xff>; + }; + + opp-586000000 { + opp-hz = /bits/ 64 <586000000>; + opp-microvolt = <700000>; + opp-supported-hw = <0xff>; + }; + + opp-637000000 { + opp-hz = /bits/ 64 <637000000>; + opp-microvolt = <712500>; + opp-supported-hw = <0xff>; + }; + + opp-690000000 { + opp-hz = /bits/ 64 <690000000>; + opp-microvolt = <737500>; + opp-supported-hw = <0xff>; + }; + + opp-743000000 { + opp-hz = /bits/ 64 <743000000>; + opp-microvolt = <756250>; + opp-supported-hw = <0xff>; + }; + + opp-796000000 { + opp-hz = /bits/ 64 <796000000>; + opp-microvolt = <781250>; + opp-supported-hw = <0xff>; + }; + + opp-850000000 { + opp-hz = /bits/ 64 <850000000>; + opp-microvolt = <800000>; + opp-supported-hw = <0xff>; + }; + + opp-900000000-3 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0x8>; + }; + + opp-900000000-4 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <837500>; + opp-supported-hw = <0x10>; + }; + + opp-900000000-5 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <825000>; + opp-supported-hw = <0x30>; + }; + + opp-950000000-3 { + opp-hz = /bits/ 64 <950000000>; + opp-microvolt = <900000>; + opp-supported-hw = <0x8>; + }; + + opp-950000000-4 { + opp-hz = /bits/ 64 <950000000>; + opp-microvolt = <875000>; + opp-supported-hw = <0x10>; + }; + + opp-950000000-5 { + opp-hz = /bits/ 64 <950000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0x30>; + }; + + opp-1000000000-3 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <950000>; + opp-supported-hw = <0x8>; + }; + + opp-1000000000-4 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <912500>; + opp-supported-hw = <0x10>; + }; + + opp-1000000000-5 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <875000>; + opp-supported-hw = <0x30>; + }; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupt-parent = <&gic>; @@ -412,7 +901,7 @@ #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8186_POWER_DOMAIN_MFG1 { + mfg1: power-domain@MT8186_POWER_DOMAIN_MFG1 { reg = <MT8186_POWER_DOMAIN_MFG1>; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; @@ -603,6 +1092,21 @@ clock-names = "spi", "wrap"; }; + spmi: spmi@10015000 { + compatible = "mediatek,mt8186-spmi", "mediatek,mt8195-spmi"; + reg = <0 0x10015000 0 0x000e00>, <0 0x1001B000 0 0x000100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_MST>; + clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_SPMI_MST>; + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + systimer: timer@10017000 { compatible = "mediatek,mt8186-timer", "mediatek,mt6765-timer"; @@ -611,6 +1115,15 @@ clocks = <&clk13m>; }; + gce: mailbox@1022c000 { + compatible = "mediatek,mt8186-gce"; + reg = <0 0X1022c000 0 0x4000>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE>; + clock-names = "gce"; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <2>; + }; + scp: scp@10500000 { compatible = "mediatek,mt8186-scp"; reg = <0 0x10500000 0 0x40000>, @@ -619,6 +1132,22 @@ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; }; + adsp: adsp@10680000 { + compatible = "mediatek,mt8186-dsp"; + reg = <0 0x10680000 0 0x2000>, <0 0x10800000 0 0x100000>, + <0 0x1068b000 0 0x100>, <0 0x1068f000 0 0x1000>; + reg-names = "cfg", "sram", "sec", "bus"; + clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>; + clock-names = "audiodsp", "adsp_bus"; + assigned-clocks = <&topckgen CLK_TOP_AUDIODSP>, + <&topckgen CLK_TOP_ADSP_BUS>; + assigned-clock-parents = <&clk26m>, <&topckgen CLK_TOP_MAINPLL_D2_D2>; + mbox-names = "rx", "tx"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + power-domains = <&spm MT8186_POWER_DOMAIN_ADSP_TOP>; + status = "disabled"; + }; + adsp_mailbox0: mailbox@10686000 { compatible = "mediatek,mt8186-adsp-mbox"; #mbox-cells = <0>; @@ -982,6 +1511,40 @@ status = "disabled"; }; + ssusb0: usb@11201000 { + compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + clocks = <&topckgen CLK_TOP_USB_TOP>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>, + <&infracfg_ao CLK_INFRA_AO_ICUSB>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port0 PHY_TYPE_USB2>; + power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host0: usb@11200000 { + compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>; + reg-names = "mac"; + clocks = <&topckgen CLK_TOP_USB_TOP>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>, + <&infracfg_ao CLK_INFRA_AO_ICUSB>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; + interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,syscon-wakeup = <&pericfg 0x420 2>; + wakeup-source; + status = "disabled"; + }; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt8186-mmc", "mediatek,mt8183-mmc"; @@ -1013,6 +1576,40 @@ status = "disabled"; }; + ssusb1: usb@11281000 { + compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3"; + reg = <0 0x11281000 0 0x2dff>, <0 0x11283e00 0 0x0100>; + reg-names = "mac", "ippc"; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>, + <&clk26m>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; + power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host1: usb@11280000 { + compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11280000 0 0x1000>; + reg-names = "mac"; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>, + <&clk26m>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,syscon-wakeup = <&pericfg 0x424 2>; + wakeup-source; + status = "disabled"; + }; + }; + u3phy0: t-phy@11c80000 { compatible = "mediatek,mt8186-tphy", "mediatek,generic-tphy-v2"; @@ -1058,6 +1655,11 @@ reg = <0 0x11cb0000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + gpu_speedbin: gpu-speed-bin@59c { + reg = <0x59c 0x4>; + bits = <0 3>; + }; }; mipi_tx0: dsi-phy@11cc0000 { @@ -1090,6 +1692,10 @@ <&spm MT8186_POWER_DOMAIN_MFG3>; power-domain-names = "core0", "core1"; #cooling-cells = <2>; + nvmem-cells = <&gpu_speedbin>; + nvmem-cell-names = "speed-bin"; + operating-points-v2 = <&gpu_opp_table>; + dynamic-power-coefficient = <4687>; status = "disabled"; }; @@ -1098,6 +1704,20 @@ reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; + }; + + mutex: mutex@14001000 { + compatible = "mediatek,mt8186-disp-mutex"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_MUTEX0>; + interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>, + <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; }; smi_common: smi@14002000 { @@ -1131,6 +1751,45 @@ power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; }; + ovl0: ovl@14005000 { + compatible = "mediatek,mt8186-disp-ovl", "mediatek,mt8192-disp-ovl"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_mm IOMMU_PORT_L0_OVL_RDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + ovl_2l0: ovl@14006000 { + compatible = "mediatek,mt8186-disp-ovl-2l", "mediatek,mt8192-disp-ovl-2l"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_mm IOMMU_PORT_L1_OVL_2L_RDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + rdma0: rdma@14007000 { + compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + color: color@14009000 { + compatible = "mediatek,mt8186-disp-color", "mediatek,mt8173-disp-color"; + reg = <0 0x14009000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + dpi: dpi@1400a000 { compatible = "mediatek,mt8186-dpi"; reg = <0 0x1400a000 0 0x1000>; @@ -1148,6 +1807,52 @@ }; }; + ccorr: ccorr@1400b000 { + compatible = "mediatek,mt8186-disp-ccorr", "mediatek,mt8192-disp-ccorr"; + reg = <0 0x1400b000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_CCORR0>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + aal: aal@1400c000 { + compatible = "mediatek,mt8186-disp-aal", "mediatek,mt8183-disp-aal"; + reg = <0 0x1400c000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_AAL0>; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + gamma: gamma@1400d000 { + compatible = "mediatek,mt8186-disp-gamma", "mediatek,mt8183-disp-gamma"; + reg = <0 0x1400d000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_GAMMA0>; + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + postmask: postmask@1400e000 { + compatible = "mediatek,mt8186-disp-postmask", + "mediatek,mt8192-disp-postmask"; + reg = <0 0x1400e000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_POSTMASK0>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + dither: dither@1400f000 { + compatible = "mediatek,mt8186-disp-dither", "mediatek,mt8183-disp-dither"; + reg = <0 0x1400f000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_DITHER0>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + dsi0: dsi@14013000 { compatible = "mediatek,mt8186-dsi"; reg = <0 0x14013000 0 0x1000>; @@ -1181,6 +1886,16 @@ #iommu-cells = <1>; }; + rdma1: rdma@1401f000 { + compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma"; + reg = <0 0x1401f000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA1>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xf000 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + wpesys: clock-controller@14020000 { compatible = "mediatek,mt8186-wpesys"; reg = <0 0x14020000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts index 43a823990a92..6e23428a3ed2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts @@ -40,9 +40,90 @@ >; }; +&pio { + bt_pins: bt-pins { + pins-bt-kill { + pinmux = <PINMUX_GPIO144__FUNC_GPIO144>; + output-low; + }; + + pins-bt-wake { + pinmux = <PINMUX_GPIO22__FUNC_GPIO22>; + bias-pull-up; + }; + + pins-ap-wake-bt { + pinmux = <PINMUX_GPIO168__FUNC_GPIO168>; + output-low; + }; + }; + + uart1_pins: uart1-pins { + pins-rx { + pinmux = <PINMUX_GPIO94__FUNC_URXD1>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO95__FUNC_UTXD1>; + }; + + pins-cts { + pinmux = <PINMUX_GPIO166__FUNC_UCTS1>; + input-enable; + }; + + pins-rts { + pinmux = <PINMUX_GPIO167__FUNC_URTS1>; + }; + }; + + uart1_pins_sleep: uart1-sleep-pins { + pins-rx { + pinmux = <PINMUX_GPIO94__FUNC_GPIO94>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO95__FUNC_UTXD1>; + }; + + pins-cts { + pinmux = <PINMUX_GPIO166__FUNC_UCTS1>; + input-enable; + }; + + pins-rts { + pinmux = <PINMUX_GPIO167__FUNC_URTS1>; + }; + }; +}; + &touchscreen { compatible = "hid-over-i2c"; post-power-on-delay-ms = <10>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_u>; }; + +&uart1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins>; + pinctrl-1 = <&uart1_pins_sleep>; + /delete-property/ interrupts; + interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>, + <&pio 94 IRQ_TYPE_EDGE_FALLING>; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + + enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 5a440504d4f9..0e8b34117090 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -275,6 +275,10 @@ remote-endpoint = <&anx7625_in>; }; +&gic { + mediatek,broken-save-restore-fw; +}; + &gpu { mali-supply = <&mt6315_7_vbuck1>; status = "okay"; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 5c30caf74026..69f4cded5dbb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -70,7 +70,8 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&l2_0>; - capacity-dmips-mhz = <530>; + performance-domains = <&performance 0>; + capacity-dmips-mhz = <427>; }; cpu1: cpu@100 { @@ -87,7 +88,8 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&l2_0>; - capacity-dmips-mhz = <530>; + performance-domains = <&performance 0>; + capacity-dmips-mhz = <427>; }; cpu2: cpu@200 { @@ -104,7 +106,8 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&l2_0>; - capacity-dmips-mhz = <530>; + performance-domains = <&performance 0>; + capacity-dmips-mhz = <427>; }; cpu3: cpu@300 { @@ -121,7 +124,8 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&l2_0>; - capacity-dmips-mhz = <530>; + performance-domains = <&performance 0>; + capacity-dmips-mhz = <427>; }; cpu4: cpu@400 { @@ -138,6 +142,7 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2_1>; + performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; }; @@ -155,6 +160,7 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2_1>; + performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; }; @@ -172,6 +178,7 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2_1>; + performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; }; @@ -189,6 +196,7 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2_1>; + performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; }; @@ -228,6 +236,7 @@ cache-line-size = <64>; cache-sets = <512>; next-level-cache = <&l3_0>; + cache-unified; }; l2_1: l2-cache1 { @@ -237,6 +246,7 @@ cache-line-size = <64>; cache-sets = <512>; next-level-cache = <&l3_0>; + cache-unified; }; l3_0: l3-cache { @@ -401,8 +411,15 @@ #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; + dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>; ranges; + performance: performance-controller@11bc10 { + compatible = "mediatek,cpufreq-hw"; + reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>; + #performance-domain-cells = <1>; + }; + gic: interrupt-controller@c000000 { compatible = "arm,gic-v3"; #interrupt-cells = <4>; @@ -1625,6 +1642,65 @@ power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>; }; + vcodec_dec: video-codec@16000000 { + compatible = "mediatek,mt8192-vcodec-dec"; + reg = <0 0x16000000 0 0x1000>; + mediatek,scp = <&scp>; + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0x16000000 0 0x26000>; + + video-codec@10000 { + compatible = "mediatek,mtk-vcodec-lat"; + reg = <0x0 0x10000 0 0x800>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys_soc CLK_VDEC_SOC_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_LAT>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&topckgen CLK_TOP_MAINPLL_D4>; + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; + }; + + video-codec@25000 { + compatible = "mediatek,mtk-vcodec-core"; + reg = <0 0x25000 0 0x1000>; + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys CLK_VDEC_VDEC>, + <&vdecsys CLK_VDEC_LAT>, + <&vdecsys CLK_VDEC_LARB1>, + <&topckgen CLK_TOP_MAINPLL_D4>; + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; + }; + }; + larb5: larb@1600d000 { compatible = "mediatek,mt8192-smi-larb"; reg = <0 0x1600d000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 8ac80a136c37..37a3e9de90ff 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -255,6 +255,10 @@ }; }; +&gic { + mediatek,broken-save-restore-fw; +}; + &gpu { status = "okay"; mali-supply = <&mt6315_7_vbuck1>; @@ -464,6 +468,13 @@ }; }; +&pcie1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins_default>; +}; + &pio { mediatek,rsel-resistance-in-si-unit; pinctrl-names = "default"; @@ -852,6 +863,24 @@ }; }; + pcie0_pins_default: pcie0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, + <PINMUX_GPIO20__FUNC_PERSTN>, + <PINMUX_GPIO21__FUNC_CLKREQN>; + bias-pull-up; + }; + }; + + pcie1_pins_default: pcie1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, + <PINMUX_GPIO23__FUNC_CLKREQN_1>, + <PINMUX_GPIO24__FUNC_WAKEN_1>; + bias-pull-up; + }; + }; + pio_default: pio-default-pins { pins-wifi-enable { pinmux = <PINMUX_GPIO58__FUNC_GPIO58>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index a44aae4ab953..4dbbf8fdab75 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -24,6 +24,8 @@ #size-cells = <2>; aliases { + dp-intf0 = &dp_intf0; + dp-intf1 = &dp_intf1; gce0 = &gce0; gce1 = &gce1; ethdr0 = ðdr0; @@ -283,6 +285,7 @@ cache-line-size = <64>; cache-sets = <512>; next-level-cache = <&l3_0>; + cache-unified; }; l2_1: l2-cache1 { @@ -292,6 +295,7 @@ cache-line-size = <64>; cache-sets = <512>; next-level-cache = <&l3_0>; + cache-unified; }; l3_0: l3-cache { @@ -2366,6 +2370,76 @@ power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; }; + video-codec@18000000 { + compatible = "mediatek,mt8195-vcodec-dec"; + mediatek,scp = <&scp>; + iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>; + #address-cells = <2>; + #size-cells = <2>; + reg = <0 0x18000000 0 0x1000>, + <0 0x18004000 0 0x1000>; + ranges = <0 0 0 0x18000000 0 0x26000>; + + video-codec@2000 { + compatible = "mediatek,mtk-vcodec-lat-soc"; + reg = <0 0x2000 0 0x800>; + iommus = <&iommu_vpp M4U_PORT_L23_VDEC_UFO_ENC_EXT>, + <&iommu_vpp M4U_PORT_L23_VDEC_RDMA_EXT>; + clocks = <&topckgen CLK_TOP_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_LAT>, + <&topckgen CLK_TOP_UNIVPLL_D4>; + clock-names = "sel", "vdec", "lat", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + video-codec@10000 { + compatible = "mediatek,mtk-vcodec-lat"; + reg = <0 0x10000 0 0x800>; + interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD_EXT>, + <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD2_EXT>, + <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_AVC_MC_EXT>, + <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_PRED_RD_EXT>, + <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_TILE_EXT>, + <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_WDMA_EXT>; + clocks = <&topckgen CLK_TOP_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_LAT>, + <&topckgen CLK_TOP_UNIVPLL_D4>; + clock-names = "sel", "vdec", "lat", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + video-codec@25000 { + compatible = "mediatek,mtk-vcodec-core"; + reg = <0 0x25000 0 0x1000>; /* VDEC_CORE_MISC */ + interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_UFO_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_PP_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_PRED_RD_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_PRED_WR_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_PPWRAP_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_TILE_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_VLD_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_VLD2_EXT>, + <&iommu_vdo M4U_PORT_L21_VDEC_AVC_MV_EXT>; + clocks = <&topckgen CLK_TOP_VDEC>, + <&vdecsys CLK_VDEC_VDEC>, + <&vdecsys CLK_VDEC_LAT>, + <&topckgen CLK_TOP_UNIVPLL_D4>; + clock-names = "sel", "vdec", "lat", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + }; + larb24: larb@1800d000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1800d000 0 0x1000>; @@ -3262,5 +3336,185 @@ }; }; }; + + vpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_VPU0>; + + trips { + vpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_VPU1>; + + trips { + vpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_GPU0>; + + trips { + gpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_GPU1>; + + trips { + gpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vdec-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_VDEC>; + + trips { + vdec_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vdec_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + img-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_IMG>; + + trips { + img_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + img_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + infra-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_INFRA>; + + trips { + infra_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + infra_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cam0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_CAM0>; + + trips { + cam0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cam1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8195_AP_CAM1>; + + trips { + cam1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index ceb48eb1a6e6..50cbaefa1a99 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -12,6 +12,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/mt8365-pinfunc.h> #include "mt8365.dtsi" +#include "mt6357.dtsi" / { model = "MediaTek MT8365 Open Platform EVK"; @@ -87,6 +88,49 @@ }; }; +&cpu0 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&cpu1 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&cpu2 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&cpu3 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +ðernet { + pinctrl-0 = <ðernet_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy>; + phy-mode = "rmii"; + /* + * Ethernet and HDMI (DSI0) are sharing pins. + * Only one can be enabled at a time and require the physical switch + * SW2101 to be set on LAN position + * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet + */ + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &i2c0 { clock-frequency = <100000>; pinctrl-0 = <&i2c0_pins>; @@ -94,7 +138,74 @@ status = "okay"; }; +&mmc0 { + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + hs400-ds-delay = <0x12012>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <&mt6357_vemc_reg>; + vqmmc-supply = <&mt6357_vio18_reg>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>; + max-frequency = <200000000>; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + pinctrl-names = "default", "state_uhs"; + sd-uhs-sdr104; + sd-uhs-sdr50; + vmmc-supply = <&mt6357_vmch_reg>; + vqmmc-supply = <&mt6357_vmc_reg>; + status = "okay"; +}; + +&mt6357_pmic { + interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; +}; + &pio { + ethernet_pins: ethernet-pins { + phy_reset_pins { + pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>; + }; + + rmii_pins { + pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>, + <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>, + <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>, + <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>, + <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>, + <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>, + <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>, + <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>, + <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>, + <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>, + <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>, + <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>, + <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>, + <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>, + <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>, + <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>; + }; + }; + gpio_keys: gpio-keys-pins { pins { pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>; @@ -111,6 +222,108 @@ }; }; + mmc0_default_pins: mmc0-default-pins { + clk-pins { + pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + cmd-dat-pins { + pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up; + }; + + rst-pins { + pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + clk-pins { + pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + cmd-dat-pins { + pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + ds-pins { + pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + rst-pins { + pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-up; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + cd-pins { + pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>; + bias-pull-up; + }; + + clk-pins { + pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + cmd-dat-pins { + pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + clk-pins { + pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + cmd-dat-pins { + pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + uart0_pins: uart0-pins { pins { pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>, @@ -164,6 +377,28 @@ status = "okay"; }; +&ssusb { + dr_mode = "otg"; + maximum-speed = "high-speed"; + pinctrl-0 = <&usb_pins>; + pinctrl-names = "default"; + usb-role-switch; + vusb33-supply = <&mt6357_vusb33_reg>; + status = "okay"; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>; + type = "micro"; + vbus-supply = <&usb_otg_vbus>; + }; +}; + +&usb_host { + vusb33-supply = <&mt6357_vusb33_reg>; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 1f6b48359115..413496c92069 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -20,6 +20,91 @@ #address-cells = <1>; #size-cells = <0>; + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-850000000 { + opp-hz = /bits/ 64 <850000000>; + opp-microvolt = <650000>; + }; + + opp-918000000 { + opp-hz = /bits/ 64 <918000000>; + opp-microvolt = <668750>; + }; + + opp-987000000 { + opp-hz = /bits/ 64 <987000000>; + opp-microvolt = <687500>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <706250>; + }; + + opp-1125000000 { + opp-hz = /bits/ 64 <1125000000>; + opp-microvolt = <725000>; + }; + + opp-1216000000 { + opp-hz = /bits/ 64 <1216000000>; + opp-microvolt = <750000>; + }; + + opp-1308000000 { + opp-hz = /bits/ 64 <1308000000>; + opp-microvolt = <775000>; + }; + + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <800000>; + }; + + opp-1466000000 { + opp-hz = /bits/ 64 <1466000000>; + opp-microvolt = <825000>; + }; + + opp-1533000000 { + opp-hz = /bits/ 64 <1533000000>; + opp-microvolt = <850000>; + }; + + opp-1633000000 { + opp-hz = /bits/ 64 <1633000000>; + opp-microvolt = <887500>; + }; + + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <912500>; + }; + + opp-1767000000 { + opp-hz = /bits/ 64 <1767000000>; + opp-microvolt = <937500>; + }; + + opp-1834000000 { + opp-hz = /bits/ 64 <1834000000>; + opp-microvolt = <962500>; + }; + + opp-1917000000 { + opp-hz = /bits/ 64 <1917000000>; + opp-microvolt = <993750>; + }; + + opp-2001000000 { + opp-hz = /bits/ 64 <2001000000>; + opp-microvolt = <1025000>; + }; + }; + cpu-map { cluster0 { core0 { @@ -43,6 +128,7 @@ reg = <0x0>; #cooling-cells = <2>; enable-method = "psci"; + cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -50,6 +136,10 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { @@ -58,6 +148,7 @@ reg = <0x1>; #cooling-cells = <2>; enable-method = "psci"; + cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -65,6 +156,10 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@2 { @@ -73,6 +168,7 @@ reg = <0x2>; #cooling-cells = <2>; enable-method = "psci"; + cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -80,6 +176,10 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@3 { @@ -88,6 +188,7 @@ reg = <0x3>; #cooling-cells = <2>; enable-method = "psci"; + cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -95,6 +196,41 @@ d-cache-line-size = <64>; d-cache-sets = <256>; next-level-cache = <&l2>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; + }; + + idle-states { + entry-method = "psci"; + + CPU_MCDI: cpu-mcdi { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x00010001>; + entry-latency-us = <300>; + exit-latency-us = <200>; + min-residency-us = <1000>; + }; + + CLUSTER_MCDI: cluster-mcdi { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x01010001>; + entry-latency-us = <350>; + exit-latency-us = <250>; + min-residency-us = <1200>; + }; + + CLUSTER_DPIDLE: cluster-dpidle { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x01010004>; + entry-latency-us = <300>; + exit-latency-us = <800>; + min-residency-us = <3300>; + }; }; l2: l2-cache { @@ -162,6 +298,12 @@ reg = <0 0x10005000 0 0x1000>; }; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8365-wdt", "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + #reset-cells = <1>; + }; + pio: pinctrl@1000b000 { compatible = "mediatek,mt8365-pinctrl"; reg = <0 0x1000b000 0 0x1000>; diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 0367a00a269b..4996499cc738 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -24,7 +24,7 @@ }; cpus { - #address-cells = <2>; + #address-cells = <1>; #size-cells = <0>; cpu-map { cluster0 { @@ -39,19 +39,21 @@ cpu0: cpu@0 { compatible = "arm,cortex-a53"; device_type = "cpu"; - reg = <0x0 0x0>; + reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu1: cpu@1 { compatible = "arm,cortex-a53"; device_type = "cpu"; - reg = <0x0 0x1>; + reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; }; L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -61,7 +63,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - psci { + psci: psci { compatible = "arm,psci-0.2"; method = "smc"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index ed94a80bf05f..f3e226de5e5e 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -325,69 +325,69 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_16"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_19"; function = "twi_scl_m"; output-high; }; - i2cmux_4: i2cmux-4 { + i2cmux_4: i2cmux-4-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_5: i2cmux-5 { + i2cmux_5: i2cmux-5-pins { pins = "GPIO_22"; function = "twi_scl_m"; output-high; }; - i2cmux_6: i2cmux-6 { + i2cmux_6: i2cmux-6-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_7: i2cmux-7 { + i2cmux_7: i2cmux-7-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_8: i2cmux-8 { + i2cmux_8: i2cmux-8-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_9: i2cmux-9 { + i2cmux_9: i2cmux-9-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; }; - i2cmux_10: i2cmux-10 { + i2cmux_10: i2cmux-10-pins { pins = "GPIO_56"; function = "twi_scl_m"; output-high; }; - i2cmux_11: i2cmux-11 { + i2cmux_11: i2cmux-11-pins { pins = "GPIO_57"; function = "twi_scl_m"; output-high; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 0760cf2e48bc..82ce007d9959 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -59,28 +59,28 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_35", "GPIO_36", "GPIO_50", "GPIO_51"; function = "twi_scl_m"; output-low; }; - i2cmux_s29: i2cmux-0 { + i2cmux_s29: i2cmux-0-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_s30: i2cmux-1 { + i2cmux_s30: i2cmux-1-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_s31: i2cmux-2 { + i2cmux_s31: i2cmux-2-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_s32: i2cmux-3 { + i2cmux_s32: i2cmux-3-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi index 9d1a082de3e2..32bb76b3202a 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi @@ -6,6 +6,18 @@ /dts-v1/; #include "sparx5.dtsi" +&psci { + status = "disabled"; +}; + +&cpu0 { + enable-method = "spin-table"; +}; + +&cpu1 { + enable-method = "spin-table"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile index a99dab90472a..3bc9787801a5 100644 --- a/arch/arm64/boot/dts/nuvoton/Makefile +++ b/arch/arm64/boot/dts/nuvoton/Makefile @@ -1,2 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MA35) += ma35d1-iot-512m.dtb +dtb-$(CONFIG_ARCH_MA35) += ma35d1-som-256m.dtb dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts new file mode 100644 index 000000000000..b89e2be6abae --- /dev/null +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Nuvoton Technology Corp. + * Author: Shan-Chun Hung <schung@nuvoton.com> + * Jacky huang <ychuang3@nuvoton.com> + */ + +/dts-v1/; +#include "ma35d1.dtsi" + +/ { + model = "Nuvoton MA35D1-IoT"; + compatible = "nuvoton,ma35d1-iot", "nuvoton,ma35d1"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + mem: memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x20000000>; /* 512M DRAM */ + }; + + clk_hxt: clock-hxt { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clk_hxt"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&clk { + assigned-clocks = <&clk CAPLL>, + <&clk DDRPLL>, + <&clk APLL>, + <&clk EPLL>, + <&clk VPLL>; + assigned-clock-rates = <800000000>, + <266000000>, + <180000000>, + <500000000>, + <102000000>; + nuvoton,pll-mode = "integer", + "fractional", + "integer", + "integer", + "integer"; +}; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts new file mode 100644 index 000000000000..a1ebddecb7f8 --- /dev/null +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Nuvoton Technology Corp. + * Author: Shan-Chun Hung <schung@nuvoton.com> + * Jacky huang <ychuang3@nuvoton.com> + */ + +/dts-v1/; +#include "ma35d1.dtsi" + +/ { + model = "Nuvoton MA35D1-SOM"; + compatible = "nuvoton,ma35d1-som", "nuvoton,ma35d1"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + mem: memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x10000000>; /* 256M DRAM */ + }; + + clk_hxt: clock-hxt { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clk_hxt"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&clk { + assigned-clocks = <&clk CAPLL>, + <&clk DDRPLL>, + <&clk APLL>, + <&clk EPLL>, + <&clk VPLL>; + assigned-clock-rates = <800000000>, + <266000000>, + <180000000>, + <500000000>, + <102000000>; + nuvoton,pll-mode = "integer", + "fractional", + "integer", + "integer", + "integer"; +}; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi new file mode 100644 index 000000000000..781cdae566a0 --- /dev/null +++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Nuvoton Technology Corp. + * Author: Shan-Chun Hung <schung@nuvoton.com> + * Jacky huang <ychuang3@nuvoton.com> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/nuvoton,ma35d1-clk.h> +#include <dt-bindings/reset/nuvoton,ma35d1-reset.h> + +/ { + compatible = "nuvoton,ma35d1"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + gic: interrupt-controller@50801000 { + compatible = "arm,gic-400"; + reg = <0x0 0x50801000 0 0x1000>, /* GICD */ + <0x0 0x50802000 0 0x2000>, /* GICC */ + <0x0 0x50804000 0 0x2000>, /* GICH */ + <0x0 0x50806000 0 0x2000>; /* GICV */ + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x13) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + interrupt-parent = <&gic>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sys: system-management@40460000 { + compatible = "nuvoton,ma35d1-reset"; + reg = <0x0 0x40460000 0x0 0x200>; + #reset-cells = <1>; + }; + + clk: clock-controller@40460200 { + compatible = "nuvoton,ma35d1-clk"; + reg = <0x00000000 0x40460200 0x0 0x100>; + #clock-cells = <1>; + clocks = <&clk_hxt>; + }; + + uart0: serial@40700000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40700000 0x0 0x100>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART0_GATE>; + status = "disabled"; + }; + + uart1: serial@40710000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40710000 0x0 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART1_GATE>; + status = "disabled"; + }; + + uart2: serial@40720000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40720000 0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART2_GATE>; + status = "disabled"; + }; + + uart3: serial@40730000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40730000 0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART3_GATE>; + status = "disabled"; + }; + + uart4: serial@40740000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40740000 0x0 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART4_GATE>; + status = "disabled"; + }; + + uart5: serial@40750000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40750000 0x0 0x100>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART5_GATE>; + status = "disabled"; + }; + + uart6: serial@40760000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40760000 0x0 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART6_GATE>; + status = "disabled"; + }; + + uart7: serial@40770000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40770000 0x0 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART7_GATE>; + status = "disabled"; + }; + + uart8: serial@40780000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40780000 0x0 0x100>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART8_GATE>; + status = "disabled"; + }; + + uart9: serial@40790000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40790000 0x0 0x100>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART9_GATE>; + status = "disabled"; + }; + + uart10: serial@407a0000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x407a0000 0x0 0x100>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART10_GATE>; + status = "disabled"; + }; + + uart11: serial@407b0000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x407b0000 0x0 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART11_GATE>; + status = "disabled"; + }; + + uart12: serial@407c0000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x407c0000 0x0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART12_GATE>; + status = "disabled"; + }; + + uart13: serial@407d0000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x407d0000 0x0 0x100>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART13_GATE>; + status = "disabled"; + }; + + uart14: serial@407e0000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x407e0000 0x0 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART14_GATE>; + status = "disabled"; + }; + + uart15: serial@407f0000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x407f0000 0x0 0x100>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART15_GATE>; + status = "disabled"; + }; + + uart16: serial@40880000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x0 0x40880000 0x0 0x100>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART16_GATE>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 1406d5d40b8f..c38c809fe577 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,7 +9,9 @@ DTC_FLAGS_tegra194-p2972-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ +DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@ DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@ +DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb @@ -25,4 +27,6 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index d7d7c63e62e2..5a1ce432c1fb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -36,6 +36,11 @@ }; }; + gpu@57000000 { + vdd-supply = <&max77621_gpu>; + status = "okay"; + }; + pinmux: pinmux@700008d4 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1370,11 +1375,27 @@ maxim,dvs-default-state = <1>; maxim,enable-active-discharge; maxim,enable-bias-control; - maxim,enable-etr; maxim,enable-gpio = <&pmic 5 0>; maxim,externally-enable; }; + max77621_gpu: regulator@1c { + compatible = "maxim,max77621"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(A, 6) IRQ_TYPE_LEVEL_LOW>; + regulator-min-microvolt = <840000>; + regulator-max-microvolt = <1150000>; + regulator-name = "PPVAR_GPU"; + regulator-ramp-delay = <12500>; + maxim,dvs-default-state = <1>; + maxim,enable-active-discharge; + maxim,enable-bias-control; + maxim,disable-etr; + maxim,enable-gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + maxim,externally-enable; + }; + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 0e463b3cbe01..617583ff2736 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -2000,6 +2000,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index 2378da324273..319b3a9cff24 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -126,7 +126,7 @@ regulator-name = "VDD_3V3_PCIE"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>; regulator-boot-on; enable-active-high; }; @@ -139,4 +139,26 @@ gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; regulator-boot-on; }; + + thermal-zones { + tj-thermal { + polling-delay = <1000>; + polling-delay-passive = <1000>; + status = "okay"; + + trips { + tj_trip_active0: active-0 { + temperature = <75000>; + hysteresis = <4000>; + type = "active"; + }; + + tj_trip_active1: active-1 { + temperature = <95000>; + hysteresis = <4000>; + type = "active"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi new file mode 100644 index 000000000000..e468352b8b7f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234.dtsi" + +/ { + compatible = "nvidia,p3701-0008", "nvidia,tegra234"; + + bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + label = "module"; + vcc-supply = <&vdd_1v8_hs>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + mmc@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + i2c@c240000 { + status = "okay"; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + thermal-sensor@4c { + status = "okay"; + reg = <0x4c>; + vcc-supply = <&vdd_1v8_ao>; + }; + }; + + thermal { + status = "okay"; + }; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_hs: regulator-vdd-1v8-hs { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ls: regulator-vdd-1v8-ls { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_ao: regulator-vdd-3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "vdd-AO-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_5v0_sys: regulator-vdd-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index caa9e952a149..cd13cf2381dd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2096,7 +2096,8 @@ ports { usb2-0 { - mode = "host"; + mode = "otg"; + usb-role-switch; status = "okay"; port { hs_typec_p1: endpoint { @@ -2152,6 +2153,14 @@ }; }; + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-0"; + }; + usb@3610000 { status = "okay"; @@ -2238,6 +2247,7 @@ i2c@c240000 { status = "okay"; + typec@8 { compatible = "cypress,cypd4226"; reg = <0x08>; @@ -2245,22 +2255,27 @@ interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>; firmware-name = "nvidia,jetson-agx-xavier"; status = "okay"; + #address-cells = <1>; #size-cells = <0>; + ccg_typec_con0: connector@0 { compatible = "usb-c-connector"; reg = <0>; label = "USB-C"; data-role = "host"; + ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; hs_ucsi_ccg_p0: endpoint { remote-endpoint = <&hs_typec_p0>; }; }; + port@1 { reg = <1>; ss_ucsi_ccg_p0: endpoint { @@ -2269,20 +2284,24 @@ }; }; }; + ccg_typec_con1: connector@1 { compatible = "usb-c-connector"; reg = <1>; label = "USB-C"; data-role = "dual"; + ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; hs_ucsi_ccg_p1: endpoint { remote-endpoint = <&hs_typec_p1>; }; }; + port@1 { reg = <1>; ss_ucsi_ccg_p1: endpoint { @@ -2324,11 +2343,7 @@ }; pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm3 0 45334>; - - cooling-levels = <0 95 178 255>; - #cooling-cells = <2>; + cooling-levels = <66 215 255>; }; serial { @@ -2336,9 +2351,8 @@ }; sound { - status = "okay"; - compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; dais = /* ADMAIF (FE) Ports */ <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, @@ -2415,4 +2429,20 @@ "CVB-RT DMIC1", "CVB-RT MIC", "CVB-RT DMIC2", "CVB-RT MIC"; }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi index 022a5408d869..d94147f22ebf 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi @@ -33,6 +33,12 @@ }; }; + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + #cooling-cells = <2>; + }; + vdd_1v8_sys: regulator-vdd-1v8-sys { compatible = "regulator-fixed"; regulator-name = "VDD_1V8_SYS"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts new file mode 100644 index 000000000000..43d797e5544f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> +#include "tegra234-p3701-0008.dtsi" +#include "tegra234-p3740-0002.dtsi" + +/ { + model = "NVIDIA IGX Orin Development Kit"; + compatible = "nvidia,p3740-0002+p3701-0008", "nvidia,p3701-0008", "nvidia,tegra234"; + + aliases { + serial0 = &tcu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + host1x@13e00000 { + nvdec@15480000 { + status = "okay"; + }; + }; + + pcie@140e0000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + phys = <&p2u_gbe_4>, <&p2u_gbe_5>; + phy-names = "p2u-0", "p2u-1"; + }; + + pcie@14100000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + pcie@14160000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + phys = <&p2u_hsio_7>, <&p2u_hsio_6>, <&p2u_hsio_5>, + <&p2u_hsio_4>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie@141e0000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + phys = <&p2u_gbe_0>, <&p2u_gbe_1>; + phy-names = "p2u-0", "p2u-1"; + }; + + aconnect@2900000 { + status = "okay"; + }; + + serial@3100000 { + compatible = "nvidia,tegra194-hsuart"; + status = "okay"; + }; + + i2c@3160000 { + status = "okay"; + }; + + i2c@3180000 { + status = "okay"; + }; + + i2c@3190000 { + status = "okay"; + }; + + i2c@31b0000 { + status = "okay"; + }; + + i2c@31c0000 { + status = "okay"; + + }; + + i2c@31e0000 { + status = "okay"; + }; + + spi@3270000 { + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "NVIDIA IGX HDA"; + status = "okay"; + }; + + fuse@3810000 { + status = "okay"; + }; + + i2c@c240000 { + status = "okay"; + }; + + i2c@c250000 { + status = "okay"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + status = "okay"; + + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + + serial { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi new file mode 100644 index 000000000000..c95063b19321 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + compatible = "nvidia,p3740-0002"; + + bus@0 { + i2c@31c0000 { + /* carrier board ID EEPROM */ + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + + label = "system"; + vcc-supply = <&vdd_1v8_ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + usb-role-switch; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-1 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + }; + }; + + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-0"; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", + "usb3-0", "usb3-1", "usb3-2"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi new file mode 100644 index 000000000000..232fa95ef4ae --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234-p3767.dtsi" + +/ { + compatible = "nvidia,p3767-0005", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin Nano"; + + bus@0 { + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin Nano HDA"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi index bd60478fa75e..a8aa6e7d8fbc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -99,74 +99,24 @@ }; thermal-zones { - /* - * This monitoring is far from optimal, but it's good enough - * at this stage. - */ - cpu-thermal { + tj-thermal { polling-delay = <1000>; polling-delay-passive = <1000>; status = "okay"; trips { - critical { - temperature = <104500>; - hysteresis = <0>; - type = "critical"; - }; - - hot { - temperature = <99000>; - hysteresis = <1000>; - type = "hot"; - }; - - board_trip_passive: passive { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - board_trip_active2: active-2 { - temperature = <80000>; + tj_trip_active0: active-0 { + temperature = <74000>; hysteresis = <4000>; type = "active"; }; - board_trip_active1: active-1 { - temperature = <65000>; - hysteresis = <4000>; - type = "active"; - }; - - board_trip_active0: active-0 { - temperature = <50000>; + tj_trip_active1: active-1 { + temperature = <95000>; hysteresis = <4000>; type = "active"; }; }; - - cooling-maps { - passive { - cooling-device = <&fan 3 3>; - trip = <&board_trip_passive>; - }; - - active2 { - cooling-device = <&fan 2 3>; - trip = <&board_trip_active2>; - }; - - active1 { - cooling-device = <&fan 1 2>; - trip = <&board_trip_active1>; - }; - - active0 { - cooling-device = <&fan 0 1>; - trip = <&board_trip_active0>; - }; - }; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts index 7dfbc38eb3c4..65e4b51b79c1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -112,11 +112,8 @@ }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm3 0 45334>; - cooling-levels = <0 95 178 255>; - #cooling-cells = <2>; + pwm-fan { + cooling-levels = <0 187 255>; }; vdd_3v3_pcie: regulator-vdd-3v3-pcie { @@ -131,4 +128,20 @@ serial { status = "okay"; }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts new file mode 100644 index 000000000000..9b86aa6f7dbe --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +#include "tegra234-p3767-0005.dtsi" +#include "tegra234-p3768-0000.dtsi" + +/ { + compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin Nano Developer Kit"; + + pwm-fan { + cooling-levels = <0 187 255>; + }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi index aee21428e1a5..c7291ba27cfa 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi @@ -119,7 +119,7 @@ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; - phy-names = "usb2-0", "usb3-1"; + phy-names = "usb2-0", "usb3-0"; }; usb@3610000 { @@ -209,7 +209,6 @@ fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm3 0 45334>; - cooling-levels = <0 95 178 255>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 18b4c2b2c42c..f4974e81dd4b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/power/tegra234-powergate.h> #include <dt-bindings/reset/tegra234-reset.h> +#include <dt-bindings/thermal/tegra234-bpmp-thermal.h> / { compatible = "nvidia,tegra234"; @@ -108,6 +109,12 @@ interrupt-controller; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pinmux 0 0 164>; + }; + + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra234-pinmux"; + reg = <0x0 0x2430000 0x0 0x19100>; }; gpcdma: dma-controller@2600000 { @@ -1749,6 +1756,12 @@ interrupt-controller; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pinmux_aon 0 0 32>; + }; + + pinmux_aon: pinmux@c300000 { + compatible = "nvidia,tegra234-pinmux-aon"; + reg = <0x0 0xc300000 0x0 0x4000>; }; pwm4: pwm@c340000 { @@ -3015,6 +3028,11 @@ #address-cells = <1>; #size-cells = <0>; }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; }; cpus { @@ -3028,6 +3046,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3044,6 +3065,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3060,6 +3084,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3076,6 +3103,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3092,6 +3122,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3108,6 +3141,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3124,6 +3160,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3140,6 +3179,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3156,6 +3198,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3172,6 +3217,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3188,6 +3236,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3204,6 +3255,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3469,6 +3523,53 @@ <&bpmp TEGRA234_CLK_PLLA_OUT0>; }; + thermal-zones { + cpu-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CPU>; + status = "disabled"; + }; + + gpu-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_GPU>; + status = "disabled"; + }; + + cv0-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV0>; + status = "disabled"; + }; + + cv1-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV1>; + status = "disabled"; + }; + + cv2-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV2>; + status = "disabled"; + }; + + soc0-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC0>; + status = "disabled"; + }; + + soc1-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC1>; + status = "disabled"; + }; + + soc2-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC2>; + status = "disabled"; + }; + + tj-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_TJ_MAX>; + status = "disabled"; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -3478,4 +3579,244 @@ interrupt-parent = <&gic>; always-on; }; + + cl0_opp_tbl: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + + cl0_ch1_opp1: opp-115200000 { + opp-hz = /bits/ 64 <115200000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp2: opp-268800000 { + opp-hz = /bits/ 64 <268800000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp3: opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp5: opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp6: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp7: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp8: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp9: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <1632000>; + }; + + cl0_ch1_opp10: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <1632000>; + }; + + cl0_ch1_opp11: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <2660000>; + }; + + cl0_ch1_opp12: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <2660000>; + }; + + cl0_ch1_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <3200000>; + }; + + cl0_ch1_opp14: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6400000>; + }; + + cl0_ch1_opp15: opp-2201600000 { + opp-hz = /bits/ 64 <2201600000>; + opp-peak-kBps = <6400000>; + }; + }; + + cl1_opp_tbl: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + + cl1_ch1_opp1: opp-115200000 { + opp-hz = /bits/ 64 <115200000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp2: opp-268800000 { + opp-hz = /bits/ 64 <268800000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp3: opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp5: opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp6: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp7: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp8: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp9: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <1632000>; + }; + + cl1_ch1_opp10: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <1632000>; + }; + + cl1_ch1_opp11: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <2660000>; + }; + + cl1_ch1_opp12: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <2660000>; + }; + + cl1_ch1_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <3200000>; + }; + + cl1_ch1_opp14: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6400000>; + }; + + cl1_ch1_opp15: opp-2201600000 { + opp-hz = /bits/ 64 <2201600000>; + opp-peak-kBps = <6400000>; + }; + }; + + cl2_opp_tbl: opp-table-cluster2 { + compatible = "operating-points-v2"; + opp-shared; + + cl2_ch1_opp1: opp-115200000 { + opp-hz = /bits/ 64 <115200000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp2: opp-268800000 { + opp-hz = /bits/ 64 <268800000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp3: opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp5: opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp6: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp7: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp8: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp9: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <1632000>; + }; + + cl2_ch1_opp10: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <1632000>; + }; + + cl2_ch1_opp11: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <2660000>; + }; + + cl2_ch1_opp12: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <2660000>; + }; + + cl2_ch1_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <3200000>; + }; + + cl2_ch1_opp14: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6400000>; + }; + + cl2_ch1_opp15: opp-2201600000 { + opp-hz = /bits/ 64 <2201600000>; + opp-peak-kBps = <6400000>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d42c59572ace..337abc4ceb17 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,15 +1,22 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -32,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb @@ -82,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -140,6 +149,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb @@ -173,7 +184,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 59860a2223b8..f3d65a606194 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -18,8 +18,10 @@ compatible = "qcom,apq8016-sbc", "qcom,apq8016"; aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + serial1 = &blsp_uart1; usid0 = &pm8916_0; i2c0 = &blsp_i2c2; i2c1 = &blsp_i2c6; @@ -75,7 +77,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -101,13 +103,13 @@ button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; }; }; leds { pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, + pinctrl-0 = <&tlmm_leds>, <&pm8916_gpios_leds>, <&pm8916_mpps_leds>; @@ -117,7 +119,7 @@ label = "apq8016-sbc:green:user1"; function = LED_FUNCTION_HEARTBEAT; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -126,7 +128,7 @@ label = "apq8016-sbc:green:user2"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; @@ -186,14 +188,14 @@ compatible = "adi,adv7533"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; clocks = <&rpmcc RPM_SMD_BB_CLK2>; clock-names = "cec"; - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; avdd-supply = <&pm8916_l6>; v1p2-supply = <&pm8916_l6>; @@ -211,7 +213,7 @@ port@0 { reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -243,12 +245,12 @@ label = "LS-SPI0"; }; -&blsp1_uart1 { +&blsp_uart1 { status = "okay"; label = "LS-UART0"; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; label = "LS-UART1"; }; @@ -276,8 +278,8 @@ compatible = "ovti,ov5640"; reg = <0x3b>; - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_default>; @@ -301,12 +303,11 @@ }; }; -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; +&lpass { + status = "okay"; }; -&lpass { +&lpass_codec { status = "okay"; }; @@ -314,40 +315,78 @@ status = "okay"; }; +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + &mpss { status = "okay"; firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; }; +&pm8916_codec { + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + /* + * The 96Boards specification expects a 1.8V power rail on the low-speed + * expansion connector that is able to provide at least 0.18W / 100 mA. + * L15/L16 are connected in parallel to provide 55 mA each. A minimum load + * must be specified to ensure the regulators are not put in LPM where they + * would only provide 5 mA. + */ + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &sound { status = "okay"; - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; pinctrl-names = "default", "sleep"; model = "DB410c"; audio-routing = @@ -370,7 +409,7 @@ sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; }; }; @@ -380,7 +419,7 @@ sound-dai = <&lpass MI2S_TERTIARY>; }; codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; }; }; }; @@ -398,13 +437,6 @@ extcon = <&usb_id>; }; -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - &wcnss { status = "okay"; firmware-name = "qcom/apq8016/wcnss.mbn"; @@ -441,130 +473,19 @@ &stm { status = "okay"; }; &tpiu { status = "okay"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - /* * 2mA drive strength is not enough when connecting multiple * I2C devices with different pull up resistors. */ -&i2c2_default { +&blsp_i2c2_default { drive-strength = <16>; }; -&i2c4_default { +&blsp_i2c4_default { drive-strength = <16>; }; -&i2c6_default { +&blsp_i2c6_default { drive-strength = <16>; }; @@ -592,7 +513,7 @@ * ones actually used for GPIO. */ -&msmgpio { +&tlmm { gpio-line-names = "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ @@ -717,7 +638,14 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; - msmgpio_leds: msmgpio-leds-state { + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tlmm_leds: tlmm-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts new file mode 100644 index 000000000000..40644c242fb7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/apq8016-lpass.h> + +/ { + model = "Square, Inc. T2 Devkit"; + compatible = "square,apq8039-t2", "qcom,msm8939"; + + qcom,board-id = <0x53 0x54>; + qcom,msm-id = <QCOM_ID_APQ8039 0x30000>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp_uart1; + serial1 = &blsp_uart2; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pinctrl-names = "default"; + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + vreg_lcd_avdd_reg: lcd-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avdd"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avdd_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_avee_reg: lcd-avee-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avee"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avee_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_iovcc_reg: lcd-iovcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_iovcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; +}; + +&blsp_i2c1 { + status = "okay"; +}; + +&blsp_i2c2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + typec_pd: usb-pd@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_irq>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; +}; + +&blsp_uart1 { + status = "okay"; +}; + +&blsp_uart1_default { + pins = "gpio0", "gpio1"; +}; + +&blsp_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&lpass_codec { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_codec { + qcom,hphl-jack-type-normally-open; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "PM_GPIO1", /* WIFI_GPIO1_PRE */ + "PM_GPIO2", /* WIFI_GPIO2_PRE */ + "PM_GPIO3", + "PM_GPIO4"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sound { + model = "apq8039-square-sndcard"; + audio-routing = "AMIC2", "MIC BIAS Internal2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; + + internal-codec-playback-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + internal-codec-capture-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; + +/* + * Line names are taken from the schematic of T2, Ver X03. + * July 14, 2018. Page 4 in particular. + */ +&tlmm { + gpio-line-names = + "APQ_UART1_TX", /* GPIO_0 */ + "APQ_UART1_RX", + "APQ_I2C1_SDA", + "APQ_I2C1_SCL", + "APQ_UART2_TX_1V8", + "APQ_UART2_RX_1V8", + "APQ_I2C2_SDA", + "APQ_I2C2_SCL", + "NC", + "APQ_LCD_IOVCC_EN", + "APQ_I2C3_SDA", /* GPIO_10 */ + "APQ_I2C3_SCL", + "TOUCH_RST_1V8_L", + "NC", + "APQ_I2C4_SDA", + "APQ_I2C4_SCL", + "APQ_ID5", + "USB_DISCONNECT", + "APQ_I2C5_SDA", + "APQ_I2C5_SCL", + "APQ_USBC_SPI_MOSI", /* GPIO_20 */ + "APQ_USBC_SPI_MISO", + "APQ_USBC_SPI_SS_L", + "APQ_USBC_SPI_CLK", + "APQ_LCD_TE0", + "APQ_LCD_RST_L", + "NC", + "NC", + "ACCELEROMETER_INT1", + "APQ_CAM_I2C0_SDA", + "APQ_CAM_I2C0_SCL", /* GPIO_30 */ + "ACCELEROMETER_INT2", + "NC", + "NC", + "NC", + "APQ_K21_RST_1V8_L", + "NC", + "APQ_EDL_1V8", + "TP145", + "BT_SSBI", + "NC", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "BT_CTRL", + "BT_DAT", + "PWR_GPIO_IN", + "PWR_GPIO_OUT", /* GPIO_50 */ + "CARD_DET_MLB_L", + "HALL_SENSOR", + "TP63", + "TP64", + "TP65", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "APQ_K21_GPIO0_1V8", + "CDC_PDM_CLK", + "CDC_PDM_SYNC", + "CDC_PDM_TX", + "CDC_PDM_RX0", + "CDC_PDM_RX1", + "CDC_PDM_RX2", + "APQ_K21_GPIO1_1V8", + "NC", /* GPIO_70 */ + "APQ_HUB_SEL_1V8", + "APQ_K21_GPIO2_1V8", + "APQ_K21_GPIO3_1V8", + "APQ_ID0", + "APQ_ID1", + "APQ_ID2", + "APQ_ID3", + "APQ_ID4", + "APQ_HUB_SUSP_IND", + "BOOT_CONFIG_0", /* GPIO_80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "APQ_LCD_AVDD_EN", + "APQ_LCD_AVEE_EN", + "TP70", + "NC", + "APQ_DEBUG0", /* GPIO_90 */ + "APQ_DEBUG1", + "APQ_DEBUG2", + "APQ_DEBUG3", + "TP165", + "NC", + "APQ_LNA_PWR_EN", + "NC", + "APQ_LCD_BL_EN", + "NC", + "APQ_LCD_ID0", /* GPIO_100 */ + "APQ_LCD_ID1", + "USBC_GPIO5_1V8", + "NC", + "NC", + "NC", + "APQ_HUB_RST_1V8_L", + "USBC_I2C_IRQ_1V8_L", + "SPE_PWR_EN", + "NC", + "APQ_USB_ID", /* GPIO_110 */ + "APQ_EXT_BUCK_VSEL", + "APQ_USB_ID_OUT", + "NC", + "PRNT_RST_L", + "APQ_CRQ_I2C_RDY_1V8", + "TYPEC_RST_1V8_H", + "CHG_BACKPWR_EN", + "CHG_PROCHOT_L", + "NC", + "USBC_GPIO7_1V8", /* GPIO_120 */ + "NC"; + + pinctrl_backlight: backlight-state { + pins = "gpio98"; + function = "gpio"; + }; + + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state { + pins = "gpio86"; + function = "gpio"; + }; + + pinctrl_lcd_avee_reg: lcd-avee-reg-state { + pins = "gpio87"; + function = "gpio"; + }; + + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state { + pins = "gpio9"; + function = "gpio"; + }; + + pinctrl_lcd_rst: lcd-rst-state { + pins = "gpio25"; + function = "gpio"; + }; + + pinctrl_otg_default: otg-default-state { + function = "gpio"; + pins = "gpio17"; + output-high; + }; + + pinctrl_otg_device: otg-device-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + pinctrl_otg_host: otg-host-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + typec_irq: typec-irq-state { + function = "gpio"; + pins = "gpio107"; + bias-pull-up; + input-enable; + }; +}; + +&usb { + pinctrl-names = "default", "host", "device"; + pinctrl-0 = <&pinctrl_otg_default>; + pinctrl-1 = <&pinctrl_otg_host>; + pinctrl-2 = <&pinctrl_otg_device>; + pin-switch-delay-us = <100000>; + usb-role-switch; + status = "okay"; + + port { + otg_ep: endpoint { + remote-endpoint = <&typec_ep>; + }; + }; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3680"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index b599909c4463..537547b97459 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -208,25 +208,6 @@ status = "okay"; }; -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - &hsusb_phy1 { status = "okay"; @@ -251,6 +232,25 @@ status = "okay"; }; +&mdss_hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active>; + pinctrl-1 = <&mdss_hdmi_hpd_suspend &mdss_hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&mdss_hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; @@ -433,28 +433,28 @@ drive-strength = <2>; }; - hdmi_hpd_active: hdmi-hpd-active-state { + mdss_hdmi_hpd_active: mdss_hdmi-hpd-active-state { pins = "gpio34"; function = "hdmi_hot"; bias-pull-down; drive-strength = <16>; }; - hdmi_hpd_suspend: hdmi-hpd-suspend-state { + mdss_hdmi_hpd_suspend: mdss_hdmi-hpd-suspend-state { pins = "gpio34"; function = "hdmi_hot"; bias-pull-down; drive-strength = <2>; }; - hdmi_ddc_active: hdmi-ddc-active-state { + mdss_hdmi_ddc_active: mdss_hdmi-ddc-active-state { pins = "gpio32", "gpio33"; function = "hdmi_ddc"; drive-strength = <2>; bias-pull-up; }; - hdmi_ddc_suspend: hdmi-ddc-suspend-state { + mdss_hdmi_ddc_suspend: mdss_hdmi-ddc-suspend-state { pins = "gpio32", "gpio33"; function = "hdmi_ddc"; drive-strength = <2>; @@ -1043,7 +1043,7 @@ }; }; - hdmi-dai-link { + mdss_hdmi-dai-link { link-name = "HDMI"; cpu { sound-dai = <&q6afedai HDMI_RX>; @@ -1054,7 +1054,7 @@ }; codec { - sound-dai = <&hdmi 0>; + sound-dai = <&mdss_hdmi 0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 71e0a500599c..ac6471d1db1f 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -26,7 +26,7 @@ v1p05: v1p05-regulator { compatible = "regulator-fixed"; - reglator-name = "v1p05"; + regulator-name = "v1p05"; regulator-always-on; regulator-boot-on; @@ -38,7 +38,7 @@ v12_poe: v12-poe-regulator { compatible = "regulator-fixed"; - reglator-name = "v12_poe"; + regulator-name = "v12_poe"; regulator-always-on; regulator-boot-on; @@ -92,15 +92,15 @@ status = "okay"; }; -&hdmi { +&mdss { status = "okay"; }; -&hdmi_phy { +&mdss_hdmi { status = "okay"; }; -&mdss { +&mdss_hdmi_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts index 3af1d5556950..3af1d5556950 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts new file mode 100644 index 000000000000..bcf3b31c20e3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP442 board device tree source + * + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3"; + compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts new file mode 100644 index 000000000000..53c68d8c5e5d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP474 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9"; + compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default_state>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + gpio_keys_default_state: gpio-keys-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index af4d97143bcf..8bfc2db44624 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -115,6 +115,16 @@ #size-cells = <2>; ranges; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz_mem: tz@4a600000 { reg = <0x0 0x4a600000 0x0 0x200000>; no-map; @@ -122,7 +132,7 @@ smem@4a800000 { compatible = "qcom,smem"; - reg = <0x0 0x4a800000 0x0 0x00100000>; + reg = <0x0 0x4a800000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; @@ -135,6 +145,13 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + qfprom: efuse@a4000 { + compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x721>; + #address-cells = <1>; + #size-cells = <1>; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -219,6 +236,18 @@ status = "disabled"; }; + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_spi0: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x600>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index f531797f2619..7355f266742a 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -91,6 +91,7 @@ firmware { scm { compatible = "qcom,scm-ipq6018", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; @@ -155,18 +156,28 @@ no-map; }; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz: memory@4a600000 { - reg = <0x0 0x4a600000 0x0 0x00400000>; + reg = <0x0 0x4a600000 0x0 0x400000>; no-map; }; smem_region: memory@4aa00000 { - reg = <0x0 0x4aa00000 0x0 0x00100000>; + reg = <0x0 0x4aa00000 0x0 0x100000>; no-map; }; q6_region: memory@4ab00000 { - reg = <0x0 0x4ab00000 0x0 0x05500000>; + reg = <0x0 0x4ab00000 0x0 0x5500000>; no-map; }; }; @@ -199,7 +210,7 @@ hwlocks = <&tcsr_mutex 0>; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x0 0xffffffff>; @@ -302,7 +313,14 @@ status = "disabled"; }; - prng: qrng@e1000 { + qfprom: efuse@a4000 { + compatible = "qcom,ipq6018-qfprom", "qcom,qfprom"; + reg = <0x0 0x000a4000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + prng: qrng@e3000 { compatible = "qcom,prng-ee"; reg = <0x0 0x000e3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; @@ -441,7 +459,6 @@ #size-cells = <0>; reg = <0x0 0x078b5000 0x0 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -456,7 +473,6 @@ #size-cells = <0>; reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -572,7 +588,7 @@ #address-cells = <2>; #size-cells = <2>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 5b2c1986c8f4..68839acbd613 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -29,8 +29,8 @@ }; cpus { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; @@ -86,29 +86,40 @@ #size-cells = <2>; ranges; + bootloader@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + smem@4ab00000 { compatible = "qcom,smem"; - reg = <0x0 0x4ab00000 0x0 0x00100000>; + reg = <0x0 0x4ab00000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; }; memory@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x400000>; no-map; - reg = <0x0 0x4ac00000 0x0 0x00400000>; }; }; firmware { scm { compatible = "qcom,scm-ipq8074", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; - soc: soc { - #address-cells = <0x1>; - #size-cells = <0x1>; + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; @@ -322,9 +333,9 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 70>; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; serial_4_pins: serial4-state { pins = "gpio23", "gpio24"; @@ -382,6 +393,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq8074", "syscon"; + reg = <0x01937000 0x21000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -476,7 +492,6 @@ #size-cells = <0>; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -534,6 +549,20 @@ status = "disabled"; }; + blsp1_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -667,7 +696,7 @@ #address-cells = <1>; #size-cells = <1>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ranges = <0 0xb00a000 0xffd>; @@ -904,6 +933,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 4>; + + trips { + nss-top-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss0-thermal { @@ -911,6 +948,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 5>; + + trips { + nss-0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss1-thermal { @@ -918,6 +963,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 6>; + + trips { + nss-1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya0-thermal { @@ -925,6 +978,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya1-thermal { @@ -932,6 +993,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu0_thermal: cpu0-thermal { @@ -939,6 +1008,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 9>; + + trips { + cpu0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu1_thermal: cpu1-thermal { @@ -946,6 +1023,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 10>; + + trips { + cpu1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu2_thermal: cpu2-thermal { @@ -953,6 +1038,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 11>; + + trips { + cpu2-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu3_thermal: cpu3-thermal { @@ -960,6 +1053,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 12>; + + trips { + cpu3-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cluster_thermal: cluster-thermal { @@ -967,6 +1068,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 13>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb0-thermal { @@ -974,6 +1083,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 14>; + + trips { + wcss-phyb0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb1-thermal { @@ -981,6 +1098,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 15>; + + trips { + wcss-phyb1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts new file mode 100644 index 000000000000..2b093e02637b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP418 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; + compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 2c8430197ec0..2b3ed8d351f7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * IPQ9574 AL02-C7 board device tree source + * IPQ9574 RDP433 board device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. @@ -29,6 +29,25 @@ status = "okay"; }; +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + &sdhc_1 { pinctrl-0 = <&sdc_default_state>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts new file mode 100644 index 000000000000..c8fa54e1a62c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP449 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; + compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts new file mode 100644 index 000000000000..f01de6628c3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP453 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts new file mode 100644 index 000000000000..6efae3426cb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP454 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; + compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 0ed19fbf7d87..f120c7c52351 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -6,8 +6,9 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,ipq9574-gcc.h> / { @@ -16,12 +17,6 @@ #size-cells = <2>; clocks { - bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { - compatible = "fixed-clock"; - clock-frequency = <353000000>; - #clock-cells = <0>; - }; - sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -43,6 +38,10 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU1: cpu@1 { @@ -51,6 +50,10 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU2: cpu@2 { @@ -59,6 +62,10 @@ reg = <0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU3: cpu@3 { @@ -67,6 +74,10 @@ reg = <0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; L2_0: l2-cache { @@ -76,12 +87,60 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq9574", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + memory@40000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ reg = <0x0 0x40000000 0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-936000000 { + opp-hz = /bits/ 64 <936000000>; + opp-microvolt = <725000>; + clock-latency-ns = <200000>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <787500>; + clock-latency-ns = <200000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <862500>; + clock-latency-ns = <200000>; + }; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <200000>; + }; + }; + pmu { compatible = "arm,cortex-a73-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -97,10 +156,39 @@ #size-cells = <2>; ranges; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz_region: tz@4a600000 { reg = <0x0 0x4a600000 0x0 0x400000>; no-map; }; + + smem@4aa00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4aa00000 0x0 0x100000>; + hwlocks = <&tcsr_mutex 0>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-ipq9574"; + qcom,glink-channels = "rpm_requests"; + }; }; soc: soc@0 { @@ -109,6 +197,55 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x6000>; + }; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: efuse@a4000 { + compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x5a1>; + #address-cells = <1>; + #size-cells = <1>; + }; + + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + }; + + crypto: crypto@73a000 { + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq9574-tlmm"; reg = <0x01000000 0x300000>; @@ -132,7 +269,7 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board_clk>, <&sleep_clk>, - <&bias_pll_ubi_nc_clk>, + <0>, <0>, <0>, <0>, @@ -143,6 +280,17 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq9574", "syscon"; + reg = <0x01937000 0x21000>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x07805000 0x1000>; @@ -160,6 +308,36 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart2: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; @@ -170,17 +348,174 @@ status = "disabled"; }; + blsp1_uart3: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b2000 0x200>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart4: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b3000 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b4000 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi3: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi4: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ - <0x0b002000 0x1000>, /* GICC */ + <0x0b002000 0x2000>, /* GICC */ <0x0b001000 0x1000>, /* GICH */ - <0x0b004000 0x1000>; /* GICV */ + <0x0b004000 0x2000>; /* GICV */ #address-cells = <1>; #size-cells = <1>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; ranges = <0 0x0b00c000 0x3000>; v2m0: v2m@0 { @@ -202,6 +537,32 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq9574-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a73pll>, <&xo_board_clk>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a73pll: clock@b116000 { + compatible = "qcom,ipq9574-a73pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; @@ -261,6 +622,214 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + ubi_0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + ubi_1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + ubi_2-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + ubi_3-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 11>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 12>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wcss-phyb-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 14>; + + trips { + wcss_phyb-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 15>; + + trips { + top_glue-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 13cd9ad167df..5ad49fe999db 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -22,7 +22,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -39,14 +41,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -58,7 +60,7 @@ accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -89,10 +91,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l16>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,24 +116,32 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - status = "okay"; }; &sdhc_2 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -153,110 +163,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -273,6 +180,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index fecb69944cfa..1c43f3d6a0b4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,7 +32,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -42,7 +44,7 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; linux,default-trigger = "torch"; function = LED_FUNCTION_TORCH; }; @@ -50,13 +52,13 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -66,9 +68,9 @@ touchscreen@26 { compatible = "mstar,msg2638"; reg = <0x26>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_reset_default>; vdd-supply = <&pm8916_l17>; @@ -86,7 +88,7 @@ reg = <0x0c>; vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; mount-matrix = "0", "1", "0", @@ -99,7 +101,7 @@ reg = <0x0f>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; @@ -111,7 +113,7 @@ proximity@48 { compatible = "sensortek,stk3310"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&proximity_int_default>; @@ -122,7 +124,7 @@ reg = <0x68>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <97 IRQ_TYPE_EDGE_RISING>, <98 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -136,7 +138,7 @@ led-controller@68 { compatible = "si-en,sn3190"; reg = <0x68>; - shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_enable_default &led_shutdown_default>; #address-cells = <1>; @@ -156,26 +158,29 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -195,110 +200,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; @@ -370,6 +272,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 91284a1d0966..92f695481769 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,14 +32,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; }; button-volume-down { label = "Volume Down"; - gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; }; @@ -49,7 +51,7 @@ regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; enable-active-high; startup-delay-us = <200>; @@ -60,7 +62,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -76,7 +78,7 @@ vdd-supply = <&pm8916_l8>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +88,7 @@ compatible = "invensense,mpu6515"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <36 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -108,10 +110,10 @@ compatible = "edt,edt-ft5306"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l11>; iovcc-supply = <&pm8916_l6>; @@ -124,16 +126,19 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { @@ -141,9 +146,9 @@ vmmc-supply = <®_sd_vmmc>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -163,110 +168,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; function = "gpio"; @@ -299,6 +201,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { touch-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index 525ec76efeeb..f4dbc515c47a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -14,7 +14,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -24,8 +26,8 @@ flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_flash_default>; pinctrl-names = "default"; @@ -45,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -59,21 +61,21 @@ led-red { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_RED>; - gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; led-green { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; @@ -87,10 +89,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,24 +116,27 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -153,110 +158,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; @@ -278,6 +180,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 5b1bac8f5122..4239c8fda11b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -26,7 +26,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -43,7 +45,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -55,21 +57,21 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_RED>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-1 { - gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-2 { - gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_BLUE>; default-state = "off"; function = LED_FUNCTION_INDICATOR; @@ -78,7 +80,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -94,7 +96,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -104,7 +106,7 @@ compatible = "kionix,kx023-1025"; reg = <0x1e>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -122,7 +124,7 @@ compatible = "avago,apds9930"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -146,7 +148,7 @@ regulator-name = "outp"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; @@ -154,7 +156,7 @@ regulator-name = "outn"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; }; @@ -169,7 +171,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -199,18 +201,18 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x28>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -218,32 +220,57 @@ status = "okay"; }; +&lpass_codec { + status = "okay"; +}; + +&pm8916_codec { + status = "okay"; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; /* - * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>. * However, gpio38 does not change its state when inserting/removing the * SD card, it's just low all the time. The Huawei kernel seems to use * polling for SD card detection instead. @@ -255,7 +282,7 @@ * Maybe Huawei decided to replace the second SIM card slot with the * SD card slot and forgot to re-route to gpio38. */ - cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; }; &sound { @@ -268,8 +295,8 @@ "AMIC3", "MIC BIAS External1"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cdc_pdm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus>; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; primary-dai-link { link-name = "WCD"; @@ -277,7 +304,7 @@ sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; }; }; @@ -287,7 +314,7 @@ sound-dai = <&lpass MI2S_TERTIARY>; }; codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; }; }; }; @@ -301,13 +328,6 @@ extcon = <&usb_id>; }; -&wcd_codec { - qcom,micbias-lvl = <2800>; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; - qcom,hphl-jack-type-normally-open; -}; - &wcnss { status = "okay"; }; @@ -316,110 +336,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -476,7 +393,7 @@ bias-disable; }; - sdhc2_cd_default: sdhc2-cd-default-state { + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio56"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index f1dd625e1822..97262b8519b3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -14,7 +14,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -41,7 +43,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -53,7 +55,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -62,8 +64,8 @@ flash-led-controller { compatible = "sgmicro,sgm3140"; - flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -122,7 +124,7 @@ * to the BMC156. However, there are two pads next to the chip * that can be shorted to make it work if needed. * - * interrupt-parent = <&msmgpio>; + * interrupt-parent = <&tlmm>; * interrupts = <116 IRQ_TYPE_EDGE_RISING>; */ @@ -141,7 +143,7 @@ compatible = "bosch,bmc156_magn"; reg = <0x12>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -156,7 +158,7 @@ reg = <0x23>; proximity-near-level = <75>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -170,7 +172,7 @@ compatible = "bosch,bmg160"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <23 IRQ_TYPE_EDGE_RISING>, <22 IRQ_TYPE_EDGE_RISING>; @@ -191,7 +193,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <®_ctp>; @@ -214,7 +216,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -223,6 +225,13 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_usbin { status = "okay"; }; @@ -233,19 +242,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; }; @@ -267,110 +267,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio116"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index b79e80913af9..9757182fba3e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -13,13 +13,30 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { stdout-path = "serial0"; }; + flash-led-controller { + compatible = "ocs,ocp8110"; + enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -30,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -39,7 +56,7 @@ compatible = "gpio-leds"; led-0 { - gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_WHITE>; default-state = "off"; function = LED_FUNCTION_KBD_BACKLIGHT; @@ -51,7 +68,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +84,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +103,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -95,26 +112,29 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -134,110 +154,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; function = "gpio"; @@ -246,6 +163,13 @@ bias-disable; }; + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio49", "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -262,6 +186,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index 7c0ceb3cff45..438eb1faee1d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -12,7 +12,7 @@ compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; aliases { - serial0 = &blsp1_uart2; + serial0 = &blsp_uart2; usid0 = &pm8916_0; }; @@ -21,6 +21,6 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi deleted file mode 100644 index 33dfcf318a81..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ /dev/null @@ -1,582 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - - blsp1_uart1_default: blsp1-uart1-default-state { - /* TX, RX, CTS_N, RTS_N */ - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "blsp_uart1"; - - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart1_sleep: blsp1-uart1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp1_uart2_default: blsp1-uart2-default-state { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart2_sleep: blsp1-uart2-sleep-state { - pins = "gpio4", "gpio5"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi1_default: spi1-default-state { - spi-pins { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio2"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi1_sleep: spi1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi2_default: spi2-default-state { - spi-pins { - pins = "gpio4", "gpio5", "gpio7"; - function = "blsp_spi2"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio6"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi2_sleep: spi2-sleep-state { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi3_default: spi3-default-state { - spi-pins { - pins = "gpio8", "gpio9", "gpio11"; - function = "blsp_spi3"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio10"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi3_sleep: spi3-sleep-state { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi4_default: spi4-default-state { - spi-pins { - pins = "gpio12", "gpio13", "gpio15"; - function = "blsp_spi4"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio14"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi4_sleep: spi4-sleep-state { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi5_default: spi5-default-state { - spi-pins { - pins = "gpio16", "gpio17", "gpio19"; - function = "blsp_spi5"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio18"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi5_sleep: spi5-sleep-state { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi6_default: spi6-default-state { - spi-pins { - pins = "gpio20", "gpio21", "gpio23"; - function = "blsp_spi6"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio22"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi6_sleep: spi6-sleep-state { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - i2c1_default: i2c1-default-state { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; - - drive-strength = <2>; - bias-disable; - }; - - i2c1_sleep: i2c1-sleep-state { - pins = "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c2_default: i2c2-default-state { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - - i2c2_sleep: i2c2-sleep-state { - pins = "gpio6", "gpio7"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c3_default: i2c3-default-state { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - - drive-strength = <2>; - bias-disable; - }; - - i2c3_sleep: i2c3-sleep-state { - pins = "gpio10", "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c4_default: i2c4-default-state { - pins = "gpio14", "gpio15"; - function = "blsp_i2c4"; - - drive-strength = <2>; - bias-disable; - }; - - i2c4_sleep: i2c4-sleep-state { - pins = "gpio14", "gpio15"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c5_default: i2c5-default-state { - pins = "gpio18", "gpio19"; - function = "blsp_i2c5"; - - drive-strength = <2>; - bias-disable; - }; - - i2c5_sleep: i2c5-sleep-state { - pins = "gpio18", "gpio19"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c6_default: i2c6-default-state { - pins = "gpio22", "gpio23"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - - i2c6_sleep: i2c6-sleep-state { - pins = "gpio22", "gpio23"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - pmx-sdc1-clk-state { - sdc1_clk_on: clk-on-pins { - pins = "sdc1_clk"; - - bias-disable; - drive-strength = <16>; - }; - sdc1_clk_off: clk-off-pins { - pins = "sdc1_clk"; - - bias-disable; - drive-strength = <2>; - }; - }; - - pmx-sdc1-cmd-state { - sdc1_cmd_on: cmd-on-pins { - pins = "sdc1_cmd"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc1_cmd_off: cmd-off-pins { - pins = "sdc1_cmd"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc1-data-state { - sdc1_data_on: data-on-pins { - pins = "sdc1_data"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc1_data_off: data-off-pins { - pins = "sdc1_data"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-clk-state { - sdc2_clk_on: clk-on-pins { - pins = "sdc2_clk"; - - bias-disable; - drive-strength = <16>; - }; - sdc2_clk_off: clk-off-pins { - pins = "sdc2_clk"; - - bias-disable; - drive-strength = <2>; - }; - }; - - pmx-sdc2-cmd-state { - sdc2_cmd_on: cmd-on-pins { - pins = "sdc2_cmd"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc2_cmd_off: cmd-off-pins { - pins = "sdc2_cmd"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-data-state { - sdc2_data_on: data-on-pins { - pins = "sdc2_data"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc2_data_off: data-off-pins { - pins = "sdc2_data"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-cd-pin-state { - sdc2_cd_on: cd-on-pins { - pins = "gpio38"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - sdc2_cd_off: cd-off-pins { - pins = "gpio38"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - cdc-pdm-lines-state { - cdc_pdm_lines_act: pdm-lines-on-pins { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - - drive-strength = <8>; - bias-disable; - }; - cdc_pdm_lines_sus: pdm-lines-off-pins { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - - ext-pri-tlmm-lines-state { - ext_pri_tlmm_lines_act: ext-pa-on-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_pri_tlmm_lines_sus: ext-pa-off-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - ext-pri-ws-line-state { - ext_pri_ws_act: ext-pa-on-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - - drive-strength = <8>; - bias-disable; - }; - ext_pri_ws_sus: ext-pa-off-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - - drive-strength = <2>; - bias-disable; - }; - }; - - ext-mclk-tlmm-lines-state { - ext_mclk_tlmm_lines_act: mclk-lines-on-pins { - pins = "gpio116"; - function = "pri_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { - pins = "gpio116"; - function = "pri_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - /* secondary Mi2S */ - ext-sec-tlmm-lines-state { - ext_sec_tlmm_lines_act: tlmm-lines-on-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - cdc_dmic_lines_act: cdc-dmic-lines-on-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - - drive-strength = <8>; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - - drive-strength = <8>; - }; - }; - cdc_dmic_lines_sus: cdc-dmic-lines-off-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - - drive-strength = <2>; - bias-disable; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - - drive-strength = <2>; - bias-disable; - }; - }; - - wcnss_pin_a: wcnss-active-state { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - function = "wcss_wlan"; - - drive-strength = <6>; - bias-pull-up; - }; - - cci0_default: cci0-default-state { - pins = "gpio29", "gpio30"; - function = "cci_i2c"; - - drive-strength = <16>; - bias-disable; - }; - - camera_front_default: camera-front-default-state { - pwdn-pins { - pins = "gpio33"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio28"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - mclk1-pins { - pins = "gpio27"; - function = "cam_mclk1"; - - drive-strength = <16>; - bias-disable; - }; - }; - - camera_rear_default: camera-rear-default-state { - pwdn-pins { - pins = "gpio34"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio35"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - mclk0-pins { - pins = "gpio26"; - function = "cam_mclk0"; - - drive-strength = <16>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 6eb5e0a39510..b1a7eafbee31 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -1,4 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-only +/* + * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ #include "msm8916.dtsi" #include "pm8916.dtsi" @@ -7,12 +15,12 @@ vdda-supply = <&pm8916_l2>; }; -&dsi0 { +&mdss_dsi0 { vdda-supply = <&pm8916_l2>; vddio-supply = <&pm8916_l6>; }; -&dsi_phy0 { +&mdss_dsi0_phy { vddio-supply = <&pm8916_l6>; }; @@ -20,6 +28,12 @@ pll-supply = <&pm8916_l7>; }; +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + &sdhc_1 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -47,30 +61,97 @@ }; &rpm_requests { - smd_rpm_regulators: regulators { + pm8916_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ - pm8916_s3: s3 {}; - pm8916_s4: s4 {}; - pm8916_l1: l1 {}; - pm8916_l2: l2 {}; + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ - pm8916_l4: l4 {}; - pm8916_l5: l5 {}; - pm8916_l6: l6 {}; - pm8916_l7: l7 {}; - pm8916_l8: l8 {}; - pm8916_l9: l9 {}; - pm8916_l10: l10 {}; - pm8916_l11: l11 {}; - pm8916_l12: l12 {}; - pm8916_l13: l13 {}; - pm8916_l14: l14 {}; - pm8916_l15: l15 {}; - pm8916_l16: l16 {}; - pm8916_l17: l17 {}; - pm8916_l18: l18 {}; + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 16d67749960e..019bf73178fa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -8,7 +8,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -44,13 +46,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -65,7 +67,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -83,7 +85,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -96,7 +98,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -105,8 +107,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -118,7 +120,7 @@ compatible = "siliconmitus,sm5502-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -128,8 +130,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -142,7 +144,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; /* vcc/vdd-supply are board-specific */ @@ -157,8 +159,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -170,11 +172,11 @@ compatible = "samsung,s3fwrn5-i2c"; reg = <0x27>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; - wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; @@ -200,7 +202,7 @@ accelerometer: accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -225,7 +227,7 @@ battery@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_BOTH>; pinctrl-names = "default"; @@ -233,41 +235,44 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&mdss_default>; pinctrl-1 = <&mdss_sleep>; }; -&mdss { - status = "okay"; -}; - &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -279,110 +284,7 @@ extcon = <&muic>; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -485,6 +387,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index a1ca4d883420..e5a569698c4f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -28,7 +28,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -41,7 +41,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -67,7 +67,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -85,7 +85,7 @@ status = "okay"; }; -&dsi0 { +&mdss_dsi0 { panel@0 { reg = <0>; @@ -93,17 +93,17 @@ vdd3-supply = <®_panel_vdd3>; vci-supply = <&pm8916_l17>; - reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { data-lanes = <0 1>; remote-endpoint = <&panel_in>; }; @@ -120,7 +120,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 4e10b8a5e9f9..388482a1e3d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -36,7 +36,7 @@ compatible = "melfas,mms345l"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <720>; @@ -71,7 +71,7 @@ compatible = "qcom,wcn3660b"; }; -&msmgpio { +&tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index f6c4a011fdfd..0cdd6af7817f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -18,7 +18,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -32,7 +32,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -66,7 +66,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 4cbd68b89448..3f145dde4059 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -33,7 +33,7 @@ function = LED_FUNCTION_KBD_BACKLIGHT; color = <LED_COLOR_ID_WHITE>; - gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&gpio_leds_default>; @@ -42,14 +42,14 @@ }; ®_motor_vdd { - gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; ®_touch_key { status = "disabled"; }; -&msmgpio { +&tlmm { gpio_leds_default: gpio-led-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 74ffd04db8d8..7943bb619116 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -9,7 +9,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -34,13 +36,13 @@ volume-up-button { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; home-button { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -55,7 +57,7 @@ hall-sensor-switch { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -74,7 +76,7 @@ maxim,over-heat-temp = <600>; maxim,over-volt = <4400>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&fuelgauge_int_default>; @@ -97,7 +99,7 @@ vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l5>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; @@ -111,7 +113,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -120,25 +122,28 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + /* FIXME: Replace with MAX77849 MUIC when driver is available */ &pm8916_usbin { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -162,110 +167,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -293,4 +195,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 607a5dc8a534..48111c6a2c78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -25,7 +25,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&motor_en_default>; @@ -38,7 +38,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&tsp_en_default>; @@ -51,7 +51,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -71,20 +71,20 @@ touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®_tsp_1p8v>; vdda-supply = <®_tsp_3p3v>; - reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; pinctrl-0 = <&tsp_int_rst_default>; pinctrl-names = "default"; }; }; -&msmgpio { +&tlmm { motor_en_default: motor-en-default-state { pins = "gpio76"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 5d6f8383306b..98ceaad7fcea 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <®_tsp_en_default>; @@ -24,7 +24,7 @@ vibrator { compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&vibrator_en_default>; pinctrl-names = "default"; @@ -37,7 +37,7 @@ touchscreen@20 { compatible = "zinitix,bt532"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <768>; @@ -51,7 +51,7 @@ }; }; -&msmgpio { +&tlmm { reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index adeee0830e76..f4fd5d72b28b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -7,7 +7,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -32,7 +34,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -49,21 +51,21 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home Key"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; i2c_muic: i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -75,7 +77,7 @@ compatible = "siliconmitus,sm5703-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -84,7 +86,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -95,20 +97,16 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -128,110 +126,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -263,4 +158,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 1a41a4db874d..15dc246e84e2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -28,7 +28,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -53,13 +55,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -74,7 +76,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -87,7 +89,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -100,7 +102,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -113,7 +115,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -122,8 +124,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -135,7 +137,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -145,8 +147,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -158,7 +160,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <®_touch_key>; @@ -174,8 +176,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -187,11 +189,11 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x2b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; @@ -206,7 +208,7 @@ compatible = "st,lsm6ds3"; reg = <0x6b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -230,7 +232,7 @@ compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -245,7 +247,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -259,7 +261,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -274,19 +276,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; /* @@ -320,110 +313,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts index 82e260375174..6fe1850ba20e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; &led_r { - gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 978f0abcdf8f..16d4a91022be 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; }; &led_r { - gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; }; &mpss { @@ -40,7 +40,7 @@ }; /* This selects the external SIM card slot by default */ -&msmgpio { +&tlmm { sim_ctrl_default: sim-ctrl-default-state { esim-sel-pins { pins = "gpio0", "gpio3"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 50bae6f214f1..004a129a2ee2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -9,7 +9,8 @@ chassis-type = "embedded"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + serial0 = &blsp_uart2; }; chosen { @@ -82,11 +83,11 @@ status = "okay"; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; -/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */ +/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */ &gcc { clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; }; @@ -100,16 +101,12 @@ }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &usb { extcon = <&pm8916_usbin>; - dr_mode = "peripheral"; + usb-role-switch; status = "okay"; }; @@ -126,110 +123,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { /* pins are board-specific */ button_default: button-default-state { function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index ac56c7595f78..c94d36b38651 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -16,7 +16,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -25,8 +27,8 @@ flash-led-controller { compatible = "ocs,ocp8110"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -47,14 +49,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +69,7 @@ compatible = "invensense,mpu6880"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -90,10 +92,10 @@ compatible = "edt,edt-ft5506"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -140,7 +142,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -149,25 +151,32 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + /* + * L16 is only used for AW2013 which is fine with 2.5-3.3V. + * Use the recommended typical voltage of 2.8V as minimum. + */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; }; @@ -188,110 +197,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts index 74ce6563be18..5e6ba8c58bb5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; }; &led_r { - gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 834e0b66b7f2..7582c7d748fe 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -18,11 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - chosen { }; memory@80000000 { @@ -993,15 +988,494 @@ }; }; - msmgpio: pinctrl@1000000 { + tlmm: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x01000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 122>; + gpio-ranges = <&tlmm 0 0 122>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + blsp_i2c1_default: blsp-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c1_sleep: blsp-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_default: blsp-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_sleep: blsp-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_default: blsp-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_sleep: blsp-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_default: blsp-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_sleep: blsp-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_default: blsp-i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_sleep: blsp-i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_default: blsp-i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_sleep: blsp-i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_spi1_default: blsp-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi1_sleep: blsp-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi2_default: blsp-spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi2_sleep: blsp-spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi3_default: blsp-spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi3_sleep: blsp-spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi4_default: blsp-spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi4_sleep: blsp-spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi5_default: blsp-spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi5_sleep: blsp-spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi6_default: blsp-spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi6_sleep: blsp-spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart1_default: blsp-uart1-default-state { + /* TX, RX, CTS_N, RTS_N */ + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart1_sleep: blsp-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart2_default: blsp-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart2_sleep: blsp-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_dmic_default: cdc-dmic-default-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_sleep: cdc-dmic-sleep-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + cdc_pdm_default: cdc-pdm-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_sleep: cdc-pdm-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + pri_mi2s_default: mi2s-pri-default-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_sleep: mi2s-pri-sleep-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_ws_default: mi2s-pri-ws-default-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + + sec_mi2s_default: mi2s-sec-default-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + sec_mi2s_sleep: mi2s-sec-sleep-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + wcss_wlan_default: wcss-wlan-default-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; }; gcc: clock-controller@1800000 { @@ -1012,8 +1486,8 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board>, <&sleep_clk>, - <&dsi_phy0 1>, - <&dsi_phy0 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, <0>, <0>, <0>; @@ -1062,7 +1536,7 @@ #size-cells = <1>; ranges; - mdp: display-controller@1a01000 { + mdss_mdp: display-controller@1a01000 { compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; @@ -1087,14 +1561,14 @@ port@0 { reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; }; }; }; }; - dsi0: dsi@1a98000 { + mdss_dsi0: dsi@1a98000 { compatible = "qcom,msm8916-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a98000 0x25c>; @@ -1105,8 +1579,8 @@ assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -1120,7 +1594,7 @@ "byte", "pixel", "core"; - phys = <&dsi_phy0>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -1131,20 +1605,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi_phy0: phy@1a98300 { + mdss_dsi0_phy: phy@1a98300 { compatible = "qcom,dsi-phy-28nm-lp"; reg = <0x01a98300 0xd4>, <0x01a98500 0x280>, @@ -1162,7 +1636,7 @@ }; }; - camss: camss@1b00000 { + camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; reg = <0x01b0ac00 0x200>, <0x01b00030 0x4>, @@ -1520,20 +1994,20 @@ * Primary/Secondary MI2S both use the PRI_I2S_CLK. */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; clock-names = "ahbix-clk", - "pcnoc-mport-clk", - "pcnoc-sway-clk", "mi2s-bit-clk0", "mi2s-bit-clk1", "mi2s-bit-clk2", - "mi2s-bit-clk3"; + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; #sound-dai-cells = <1>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; @@ -1552,9 +2026,10 @@ <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "ahbix-clk", "mclk"; #sound-dai-cells = <1>; + status = "disabled"; }; - sdhc_1: mmc@7824000 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc", "core"; @@ -1566,13 +2041,16 @@ <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; mmc-ddr-1_8v; bus-width = <8>; non-removable; status = "disabled"; }; - sdhc_2: mmc@7864000 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; @@ -1584,6 +2062,9 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; bus-width = <4>; status = "disabled"; }; @@ -1598,7 +2079,7 @@ qcom,ee = <0>; }; - blsp1_uart1: serial@78af000 { + blsp_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -1607,12 +2088,12 @@ dmas = <&blsp_dma 0>, <&blsp_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-0 = <&blsp_uart1_default>; + pinctrl-1 = <&blsp_uart1_sleep>; status = "disabled"; }; - blsp1_uart2: serial@78b0000 { + blsp_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b0000 0x200>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; @@ -1621,8 +2102,8 @@ dmas = <&blsp_dma 2>, <&blsp_dma 3>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-0 = <&blsp_uart2_default>; + pinctrl-1 = <&blsp_uart2_sleep>; status = "disabled"; }; @@ -1636,8 +2117,8 @@ dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; + pinctrl-0 = <&blsp_i2c1_default>; + pinctrl-1 = <&blsp_i2c1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1653,8 +2134,8 @@ dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi1_default>; - pinctrl-1 = <&spi1_sleep>; + pinctrl-0 = <&blsp_spi1_default>; + pinctrl-1 = <&blsp_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1670,8 +2151,8 @@ dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; + pinctrl-0 = <&blsp_i2c2_default>; + pinctrl-1 = <&blsp_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1687,8 +2168,8 @@ dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi2_default>; - pinctrl-1 = <&spi2_sleep>; + pinctrl-0 = <&blsp_spi2_default>; + pinctrl-1 = <&blsp_spi2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1704,8 +2185,8 @@ dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c3_default>; - pinctrl-1 = <&i2c3_sleep>; + pinctrl-0 = <&blsp_i2c3_default>; + pinctrl-1 = <&blsp_i2c3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1721,8 +2202,8 @@ dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi3_default>; - pinctrl-1 = <&spi3_sleep>; + pinctrl-0 = <&blsp_spi3_default>; + pinctrl-1 = <&blsp_spi3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1738,8 +2219,8 @@ dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c4_default>; - pinctrl-1 = <&i2c4_sleep>; + pinctrl-0 = <&blsp_i2c4_default>; + pinctrl-1 = <&blsp_i2c4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1755,8 +2236,8 @@ dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi4_default>; - pinctrl-1 = <&spi4_sleep>; + pinctrl-0 = <&blsp_spi4_default>; + pinctrl-1 = <&blsp_spi4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1772,8 +2253,8 @@ dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; + pinctrl-0 = <&blsp_i2c5_default>; + pinctrl-1 = <&blsp_i2c5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1789,8 +2270,8 @@ dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; + pinctrl-0 = <&blsp_spi5_default>; + pinctrl-1 = <&blsp_spi5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1806,8 +2287,8 @@ dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; + pinctrl-0 = <&blsp_i2c6_default>; + pinctrl-1 = <&blsp_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1823,8 +2304,8 @@ dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi6_default>; - pinctrl-1 = <&spi6_sleep>; + pinctrl-0 = <&blsp_spi6_default>; + pinctrl-1 = <&blsp_spi6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1871,7 +2352,7 @@ }; }; - wcnss: remoteproc@a21b000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1893,7 +2374,7 @@ qcom,smem-state-names = "stop"; pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; + pinctrl-0 = <&wcss_wlan_default>; status = "disabled"; @@ -2190,5 +2671,3 @@ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; - -#include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi new file mode 100644 index 000000000000..adb96cd8d643 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * msm8939-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8939 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ + +#include "msm8939.dtsi" +#include "pm8916.dtsi" + +&mdss_dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi0_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + +&rpm_requests { + pm8916_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ + /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; + + /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts new file mode 100644 index 000000000000..8613cf93dac5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Bryan O'Donoghue. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia M4 Aqua"; + compatible = "sony,kanuti-tulip", "qcom,msm8939"; + + qcom,board-id = <QCOM_BOARD_ID_MTP 0>; + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi new file mode 100644 index 000000000000..895cafc11480 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -0,0 +1,2436 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,gcc-msm8939.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,msm8939.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,gcc-msm8939.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + /* + * Stock LK wants address-cells/size-cells = 2 + * A number of our drivers want address/size cells = 1 + * hence the disparity between top-level and /soc below. + */ + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x100>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x101>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU2: cpu@102 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x102>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU3: cpu@103 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x103>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU4: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x0>; + qcom,acc = <&acc4>; + qcom,saw = <&saw4>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x1>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc5>; + qcom,saw = <&saw5>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU6: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x2>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc6>; + qcom,saw = <&saw6>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU7: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x3>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc7>; + qcom,saw = <&saw7>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + idle-states { + CPU_SLEEP_0: cpu-sleep-0 { + compatible ="qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + }; + + /* + * MSM8939 has a big.LITTLE heterogeneous computing architecture, + * consisting of two clusters of four ARM Cortex-A53s each. The + * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs + * at 1.5-1.7GHz. + * + * The enable method used here is spin-table which presupposes use + * of a 2nd stage boot shim such as lk2nd to have installed a + * spin-table, the downstream non-psci/non-spin-table method that + * default msm8916/msm8936/msm8939 will not be supported upstream. + */ + cpu-map { + /* LITTLE (efficiency) cluster */ + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + /* big (performance) cluster */ + /* Boot CPU is cluster 1 core 0 */ + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + wcnss_mem: wcnss@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c300000 { + reg = <0x0 0x8c300000 0x0 0x800000>; + no-map; + }; + + mba_mem: mba@8cb00000 { + reg = <0x0 0x8cb00000 0x0 0x100000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs1_mbox 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8936"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8939-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1_mbox 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1_mbox 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs1_mbox 8 13>; + qcom,ipc-3 = <&apcs1_mbox 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@a0 { + reg = <0xa0 0x1>; + bits = <0 8>; + }; + + tsens_s6_p1: s6-p1@a1 { + reg = <0xa1 0x1>; + bits = <0 6>; + }; + + tsens_s6_p2: s6-p2@a1 { + reg = <0xa1 0x2>; + bits = <6 6>; + }; + + tsens_s7_p1: s7-p1@a2 { + reg = <0xa2 0x2>; + bits = <4 6>; + }; + + tsens_s7_p2: s7-p2@a3 { + reg = <0xa3 0x1>; + bits = <2 6>; + }; + + tsens_s8_p1: s8-p1@a4 { + reg = <0xa4 0x1>; + bits = <0 6>; + }; + + tsens_s8_p2: s8-p2@a4 { + reg = <0xa4 0x2>; + bits = <6 6>; + }; + + tsens_s9_p1: s9-p1@a5 { + reg = <0xa5 0x2>; + bits = <4 6>; + }; + + tsens_s9_p2: s9-p2@a6 { + reg = <0xa6 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@a7 { + reg = <0xa7 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@d0 { + reg = <0xd0 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@d1 { + reg = <0xd1 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@d4 { + reg = <0xd4 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@d5 { + reg = <0xd5 0x2>; + bits = <5 6>; + }; + + tsens_s5_p1: s5-p1@d6 { + reg = <0xd6 0x2>; + bits = <3 6>; + }; + + tsens_s5_p2: s5-p2@d7 { + reg = <0xd7 0x1>; + bits = <1 6>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + #interconnect-cells = <1>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2"; + #qcom,sensors = <9>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8939-pcnoc"; + reg = <0x00500000 0x11000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + #interconnect-cells = <1>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14080>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, + <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; + #interconnect-cells = <1>; + }; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp_i2c1_default: blsp-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c1_sleep: blsp-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_default: blsp-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_sleep: blsp-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_default: blsp-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_sleep: blsp-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_default: blsp-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_sleep: blsp-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_default: blsp-i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_sleep: blsp-i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_default: blsp-i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_sleep: blsp-i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_spi1_default: blsp-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi1_sleep: blsp-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi2_default: blsp-spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi2_sleep: blsp-spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi3_default: blsp-spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi3_sleep: blsp-spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi4_default: blsp-spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi4_sleep: blsp-spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi5_default: blsp-spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi5_sleep: blsp-spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi6_default: blsp-spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi6_sleep: blsp-spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart1_default: blsp-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart1_sleep: blsp-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart2_default: blsp-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart2_sleep: blsp-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_dmic_default: cdc-dmic-default-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_sleep: cdc-dmic-sleep-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + cdc_pdm_default: cdc-pdm-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_sleep: cdc-pdm-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + pri_mi2s_default: mi2s-pri-default-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_sleep: mi2s-pri-sleep-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_ws_default: mi2s-pri-ws-default-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + + sec_mi2s_default: mi2s-sec-default-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + sec_mi2s_sleep: mi2s-sec-sleep-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + wcss_wlan_default: wcss-wlan-default-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8939"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdss_mdp_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a98000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + phys = <&mdss_dsi0_phy>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + + mdss_dsi1: dsi@1aa0000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01aa0000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + phys = <&mdss_dsi1_phy>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdss_mdp_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@1aa0300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01aa0300 0xd4>, + <0x01aa0500 0x280>, + <0x01aa0780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-405.0", "qcom,adreno"; + reg = <0x01c00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d", + "rbbmtimer"; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>, + <&gcc GCC_OXILI_TIMER_CLK>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + apps_iommu: iommu@1ef0000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + reg = <0x01ef0000 0x3000>; + ranges = <0 0x01e20000 0x40000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <17>; + + /* mdp_0: */ + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* venus_ns: */ + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>, + <&gcc GCC_GFX_TBU_CLK>; + clock-names = "iface", "bus", "tbu"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <18>; + + /* gfx3d_user: */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d_priv: */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "xo"; + power-domains = <&rpmpd MSM8939_VDDMDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + resets = <&scm 0>; + reset-names = "mss_restart"; + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + mboxes = <&apcs1_mbox 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; + }; + + sound: sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, + <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + status = "disabled"; + }; + + lpass: audio-controller@7708000 { + compatible = "qcom,apq8016-lpass-cpu"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; + clock-names = "ahbix-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_uart1_default>; + pinctrl-1 = <&blsp_uart1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_uart2_default>; + pinctrl-1 = <&blsp_uart2_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c1_default>; + pinctrl-1 = <&blsp_i2c1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi1_default>; + pinctrl-1 = <&blsp_spi1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c2_default>; + pinctrl-1 = <&blsp_i2c2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi2_default>; + pinctrl-1 = <&blsp_spi2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c3_default>; + pinctrl-1 = <&blsp_i2c3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi3_default>; + pinctrl-1 = <&blsp_spi3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c4_default>; + pinctrl-1 = <&blsp_i2c4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi4_default>; + pinctrl-1 = <&blsp_spi4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c5_default>; + pinctrl-1 = <&blsp_i2c5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi5_default>; + pinctrl-1 = <&blsp_spi5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c6_default>; + pinctrl-1 = <&blsp_i2c6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi6_default>; + pinctrl-1 = <&blsp_spi6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + #reset-cells = <1>; + phy_type = "ulpi"; + dr_mode = "otg"; + adp-disable; + hnp-disable; + srp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + #phy-cells = <0>; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + power-domains = <&rpmpd MSM8939_VDDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcss_wlan_default>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 1>; + qcom,ipc = <&apcs1_mbox 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apcs1_mbox: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + assigned-clocks = <&apcs2>; + assigned-clock-rates = <297600000>; + #mbox-cells = <1>; + }; + + a53pll_c1: clock@b016000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + }; + + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>; + }; + + saw0: power-manager@b089000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + }; + + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>; + }; + + saw1: power-manager@b099000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>; + }; + + saw2: power-manager@b0a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>; + }; + + saw3: power-manager@b0b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + }; + + apcs0_mbox: mailbox@b111000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + a53pll_c0: clock@b116000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + acc4: clock-controller@b188000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b188000 0x1000>; + }; + + saw4: power-manager@b189000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b189000 0x1000>; + }; + + acc5: clock-controller@b198000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b198000 0x1000>; + }; + + saw5: power-manager@b199000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b199000 0x1000>; + }; + + acc6: clock-controller@b1a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1a8000 0x1000>; + }; + + saw6: power-manager@b1a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1a9000 0x1000>; + }; + + acc7: clock-controller@b1b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1b8000 0x1000>; + }; + + saw7: power-manager@b1b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1b9000 0x1000>; + }; + + a53pll_cci: clock@b1d0000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b1d0000 0x40>; + #clock-cells = <0>; + }; + + apcs2: mailbox@b1d1000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b1d1000 0x1000>; + clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4567-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + cpu4567_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4567_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4567_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modem2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index d44cfa0471e9..b711cf9a6dc0 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -766,10 +766,10 @@ #power-domain-cells = <1>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>; clock-names = "xo", "sleep", "dsi0pll", @@ -851,20 +851,20 @@ port@0 { reg = <0>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; - dsi0: dsi@1a94000 { + mdss_dsi0: dsi@1a94000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a94000 0x400>; reg-names = "dsi_ctrl"; @@ -874,8 +874,8 @@ assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, - <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -890,7 +890,7 @@ "pixel", "core"; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -903,20 +903,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@1a94400 { + mdss_dsi0_phy: phy@1a94400 { compatible = "qcom,dsi-phy-14nm-8953"; reg = <0x01a94400 0x100>, <0x01a94500 0x300>, @@ -934,7 +934,7 @@ status = "disabled"; }; - dsi1: dsi@1a96000 { + mdss_dsi1: dsi@1a96000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a96000 0x400>; reg-names = "dsi_ctrl"; @@ -944,8 +944,8 @@ assigned-clocks = <&gcc BYTE1_CLK_SRC>, <&gcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, - <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -960,7 +960,7 @@ "pixel", "core"; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -970,20 +970,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@1a96400 { + mdss_dsi1_phy: phy@1a96400 { compatible = "qcom,dsi-phy-14nm-8953"; reg = <0x01a96400 0x100>, <0x01a96500 0x300>, @@ -1002,7 +1002,7 @@ }; }; - apps_iommu: iommu@1e00000 { + apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; @@ -1276,6 +1276,19 @@ }; }; + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + uart_0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -1294,6 +1307,8 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_1_default>; @@ -1312,6 +1327,8 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_2_default>; @@ -1330,6 +1347,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_3_default>; pinctrl-1 = <&i2c_3_sleep>; @@ -1347,6 +1367,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_4_default>; pinctrl-1 = <&i2c_4_sleep>; @@ -1357,6 +1380,19 @@ status = "disabled"; }; + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + i2c_5: i2c@7af5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af5000 0x600>; @@ -1364,6 +1400,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_5_default>; pinctrl-1 = <&i2c_5_sleep>; @@ -1381,6 +1420,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_6_default>; pinctrl-1 = <&i2c_6_sleep>; @@ -1398,6 +1440,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_7_default>; pinctrl-1 = <&i2c_7_sleep>; @@ -1415,6 +1460,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_8_default>; pinctrl-1 = <&i2c_8_sleep>; @@ -1425,7 +1473,7 @@ status = "disabled"; }; - wcnss: remoteproc@a21b000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v3-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1507,8 +1555,8 @@ timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; - #address-cells = <0x01>; - #size-cells = <0x01>; + #address-cells = <1>; + #size-cells = <1>; ranges; frame@b121000 { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index f47fb8ea71e2..753b9a2105ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -822,7 +822,7 @@ #interrupt-cells = <4>; }; - sdhc_1: mmc@7824000 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x500>, <0x07824000 0x800>; reg-names = "hc", "core"; @@ -838,7 +838,7 @@ status = "disabled"; }; - sdhc_2: mmc@7864000 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; @@ -957,7 +957,7 @@ #reset-cells = <1>; }; - sdhc_3: mmc@7a24000 { + sdhc_3: mmc@7a24900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07a24900 0x11c>, <0x07a24000 0x800>; reg-names = "hc", "core"; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index bdc3f2ba1755..5a7923d7c62a 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -342,8 +342,7 @@ }; }; - soc: soc { - + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -747,7 +746,7 @@ reg = <0xfc4ab000 0x4>; }; - spmi_bus: spmi@fc4c0000 { + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xfc4cf000 0x1000>, <0xfc4cb000 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 596ad4c896f5..495d45a16e63 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -24,10 +24,10 @@ status = "okay"; }; -&hdmi { +&mdss_hdmi { status = "okay"; }; -&hdmi_phy { +&mdss_hdmi_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 2adadc1e5b7c..ec5457508fe6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -164,21 +164,6 @@ vdda-supply = <&vreg_l2a_1p25>; }; -&dsi0 { - vdda-supply = <&vreg_l2a_1p25>; - vcca-supply = <&vreg_l22a_3p0>; - status = "okay"; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vcca-supply = <&vreg_l28a_0p925>; - status = "okay"; -}; - &hsusb_phy1 { vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; @@ -201,6 +186,21 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l22a_3p0>; + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 7f4d493a55ff..b4b770a9277d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -11,6 +11,7 @@ #include "pmi8996.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> @@ -605,6 +606,34 @@ }; }; +&pmi8994_lpg { + qcom,power-source = <1>; + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &pmi8994_spmi_regulators { vdd_gfx: pmi8994_s2: s2 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 1ce5df0a3405..47f55c7311e9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -235,7 +235,15 @@ }; }; -&dsi0 { +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -246,26 +254,18 @@ pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; }; -&dsi0_out { +&mdss_dsi0_out { status = "okay"; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l28a_0p925>; }; -&gpu { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 100123d51494..bdedcf9dff03 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -93,7 +93,13 @@ }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -112,22 +118,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; -}; - &pmi8994_wled { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 30257c07e127..0cb2d4f08c3a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -606,7 +606,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -889,16 +889,16 @@ #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; clocks = <&xo_board>, - <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, <&gcc GPLL0>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>, - <&hdmi_phy>; + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_hdmi_phy>; clock-names = "xo", - "gcc_mmss_noc_cfg_ahb_clk", "gpll0", + "gcc_mmss_noc_cfg_ahb_clk", "dsi0pll", "dsi0pllbyte", "dsi1pll", @@ -980,27 +980,27 @@ port@0 { reg = <0>; mdp5_intf3_out: endpoint { - remote-endpoint = <&hdmi_in>; + remote-endpoint = <&mdss_hdmi_in>; }; }; port@1 { reg = <1>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; - dsi0: dsi@994000 { + mdss_dsi0: dsi@994000 { compatible = "qcom,msm8996-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x00994000 0x400>; @@ -1024,9 +1024,9 @@ "pixel", "core"; assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; #address-cells = <1>; @@ -1038,20 +1038,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@994400 { + mdss_dsi0_phy: phy@994400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00994400 0x100>, <0x00994500 0x300>, @@ -1068,7 +1068,7 @@ status = "disabled"; }; - dsi1: dsi@996000 { + mdss_dsi1: dsi@996000 { compatible = "qcom,msm8996-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x00996000 0x400>; @@ -1092,9 +1092,9 @@ "pixel", "core"; assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; #address-cells = <1>; @@ -1106,20 +1106,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@996400 { + mdss_dsi1_phy: phy@996400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00996400 0x100>, <0x00996500 0x300>, @@ -1136,8 +1136,8 @@ status = "disabled"; }; - hdmi: hdmi-tx@9a0000 { - compatible = "qcom,hdmi-tx-8996"; + mdss_hdmi: mdss_hdmi-tx@9a0000 { + compatible = "qcom,mdss_hdmi-tx-8996"; reg = <0x009a0000 0x50c>, <0x00070000 0x6158>, <0x009e0000 0xfff>; @@ -1160,7 +1160,7 @@ "alt_iface", "extp"; - phys = <&hdmi_phy>; + phys = <&mdss_hdmi_phy>; #sound-dai-cells = <1>; status = "disabled"; @@ -1171,16 +1171,16 @@ port@0 { reg = <0>; - hdmi_in: endpoint { + mdss_hdmi_in: endpoint { remote-endpoint = <&mdp5_intf3_out>; }; }; }; }; - hdmi_phy: phy@9a0600 { + mdss_hdmi_phy: phy@9a0600 { #phy-cells = <0>; - compatible = "qcom,hdmi-phy-8996"; + compatible = "qcom,mdss_hdmi-phy-8996"; reg = <0x009a0600 0x1c4>, <0x009a0a00 0x124>, <0x009a0c00 0x124>, @@ -1832,7 +1832,7 @@ compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0xffffffff>; pcie0: pcie@600000 { compatible = "qcom,pcie-msm8996"; @@ -2069,7 +2069,7 @@ }; }; - camss: camss@a00000 { + camss: camss@a34000 { compatible = "qcom,msm8996-camss"; reg = <0x00a34000 0x1000>, <0x00a00030 0x4>, diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index d18d0b0eda95..7957c8823f0d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -39,7 +39,13 @@ }; }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l2a_1p25>; @@ -57,22 +63,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; - }; -}; - &mss_pil { firmware-name = "qcom/msm8996/natrium/mba.mbn", "qcom/msm8996/natrium/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi index a679a9c0cf99..b74cff06f300 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi @@ -24,101 +24,121 @@ opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-460800000 { opp-hz = /bits/ 64 <460800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-537600000 { opp-hz = /bits/ 64 <537600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-768000000 { opp-hz = /bits/ 64 <768000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-844800000 { opp-hz = /bits/ 64 <844800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <614400>; }; opp-1132800000 { opp-hz = /bits/ 64 <1132800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <691200>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <768000>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <844800>; }; opp-1363200000 { opp-hz = /bits/ 64 <1363200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; }; opp-1996800000 { opp-hz = /bits/ 64 <1996800000>; opp-supported-hw = <0x20>; clock-latency-ns = <200000>; + opp-peak-kBps = <1516800>; }; opp-2188800000 { opp-hz = /bits/ 64 <2188800000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; }; @@ -131,136 +151,163 @@ opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-460800000 { opp-hz = /bits/ 64 <460800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-537600000 { opp-hz = /bits/ 64 <537600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-748800000 { opp-hz = /bits/ 64 <748800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-825600000 { opp-hz = /bits/ 64 <825600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; }; opp-1132800000 { opp-hz = /bits/ 64 <1132800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <614400>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <691200>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <768000>; }; opp-1363200000 { opp-hz = /bits/ 64 <1363200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <844800>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1056000>; }; opp-1670400000 { opp-hz = /bits/ 64 <1670400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; }; opp-1747200000 { opp-hz = /bits/ 64 <1747200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; }; opp-1824000000 { opp-hz = /bits/ 64 <1824000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1286400>; }; opp-1900800000 { opp-hz = /bits/ 64 <1900800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1363200>; }; opp-1977600000 { opp-hz = /bits/ 64 <1977600000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1440000>; }; opp-2054400000 { opp-hz = /bits/ 64 <2054400000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1516800>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; opp-2246400000 { opp-hz = /bits/ 64 <2246400000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; opp-2342400000 { opp-hz = /bits/ 64 <2342400000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; }; }; @@ -289,3 +336,7 @@ }; /* The rest is inherited from msm8996 */ }; + +&cbf { + compatible = "qcom,msm8996pro-cbf"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 062d56c42385..68e634f8212c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -279,10 +279,6 @@ }; }; -&pmi8998_rradc { - status = "okay"; -}; - &qusb2phy { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3ec941fed14f..f0e943ff0046 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -802,7 +802,7 @@ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1230,6 +1230,57 @@ drive-strength = <2>; bias-pull-up; }; + + blsp1_spi_b_default: blsp1-spi-b-default-state { + pins = "gpio23", "gpio28"; + function = "blsp1_spi_b"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_spi1"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi2_default: blsp1-spi2-default-state { + pins = "gpio31", "gpio34", "gpio32", "gpio33"; + function = "blsp_spi2"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi3_default: blsp1-spi3-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_spi2"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi4_default: blsp1-spi4-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "blsp_spi4"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi5_default: blsp1-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "blsp_spi5"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi6_default: blsp1-spi6-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_spi6"; + drive-strength = <6>; + bias-disable; + }; + + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ blsp2_i2c1_default: blsp2-i2c1-default-state { pins = "gpio55", "gpio56"; @@ -1314,6 +1365,48 @@ drive-strength = <2>; bias-pull-up; }; + + blsp2_spi1_default: blsp2-spi1-default-state { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "blsp_spi7"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi2_default: blsp2-spi2-default-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "blsp_spi8"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi3_default: blsp2-spi3-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_spi9"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi4_default: blsp2-spi4-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "blsp_spi10"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi5_default: blsp2-spi5-default-state { + pins = "gpio58", "gpio59", "gpio60", "gpio61"; + function = "blsp_spi11"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi6_default: blsp2-spi6-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "blsp_spi12"; + drive-strength = <6>; + bias-disable; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -2251,6 +2344,114 @@ #size-cells = <0>; }; + blsp1_spi1: spi@c175000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi1_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi2: spi@c176000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi2_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi3: spi@c177000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi3_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi4: spi@c178000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi4_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi5: spi@c179000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c179000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi5_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi6: spi@c17a000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c17a000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi6_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; @@ -2394,6 +2595,114 @@ #size-cells = <0>; }; + blsp2_spi1: spi@c1b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi1_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi2: spi@c1b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi2_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi3: spi@c1b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi3_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi4: spi@c1b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi4_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi5: spi@c1b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b9000 0x600>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi5_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi6: spi@c1ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1ba000 0x600>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi6_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + mmcc: clock-controller@c8c0000 { compatible = "qcom,mmcc-msm8998"; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index d709d955a2f5..daa6f1d30efa 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com> */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index 46396ec1a330..db3d5c17a77d 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -55,5 +55,21 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8550_flash: led-controller@ee00 { + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + + pm8550_pwm: pwm { + compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f4fb1a92ab55..1ea8920ff369 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -139,7 +139,7 @@ status = "disabled"; }; - wcd_codec: audio-codec@f000 { + pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; reg-names = "pmic-codec-core"; @@ -174,10 +174,8 @@ "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index a1d36f9ebbd2..2268daf27fa7 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -79,6 +79,16 @@ reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + + pm8953_gpios: gpio@c000 { + compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8953_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmic@1 { diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 340033ac3186..695d79116cde 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -55,7 +55,7 @@ pm8998_resin: resin { compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi new file mode 100644 index 000000000000..4eb79e0ce40a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz> + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmi632-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmi632_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmi632_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + channel@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + channel@7 { + reg = <ADC5_USB_IN_I>; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + channel@8 { + reg = <ADC5_USB_IN_V_16>; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + channel@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + channel@4b { + reg = <ADC5_BAT_ID_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + label = "bat_id"; + }; + + channel@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + channel@84 { + reg = <ADC5_VBAT_SNS>; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + }; + + pmi632_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmi632_sdam_7: nvram@b600 { + compatible = "qcom,spmi-sdam"; + reg = <0xb600>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb600 0x100>; + }; + + pmi632_gpios: gpio@c000 { + compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi632_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_lpg: pwm { + compatible = "qcom,pmi632-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index ffe587f281d8..cd3f0790fd42 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,6 +9,26 @@ #address-cells = <1>; #size-cells = <0>; + pmi8998_charger: charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", + "bat-ov", + "wdog-bark", + "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + pmi8998_gpios: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; @@ -23,8 +43,6 @@ compatible = "qcom,pmi8998-rradc"; reg = <0x4500>; #io-channel-cells = <1>; - - status = "disabled"; }; }; @@ -60,6 +78,12 @@ status = "disabled"; }; + pmi8998_flash: led-controller@d300 { + compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pmi8998_wled: leds@d800 { compatible = "qcom,pmi8998-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index f26fb7d32faf..bc6297e7253e 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -13,6 +13,16 @@ #define PMK8350_SID 0 #endif +/ { + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + &spmi_bus { pmk8350: pmic@PMK8350_SID { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; @@ -66,6 +76,19 @@ status = "disabled"; }; + pmk8350_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + pmk8350_gpios: gpio@b000 { compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; reg = <0xb000>; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi index 201efeda7d2d..c7ac9b2eaacf 100644 --- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -8,6 +8,16 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + &spmi_bus { pmk8550: pmic@0 { compatible = "qcom,pm8550", "qcom,spmi-pmic"; @@ -39,7 +49,19 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; + }; + + pmk8550_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; }; pmk8550_gpios: gpio@8800 { diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index b29bc4e4b837..0ed11e80e5e2 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -48,6 +48,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -65,6 +67,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -77,6 +81,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -89,6 +95,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; cpu-map { @@ -110,6 +118,30 @@ }; }; }; + + domain-idle-states { + CLUSTER_SLEEP: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000043>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + }; }; firmware { @@ -135,6 +167,35 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CLUSTER_PD: power-domain-cpu-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP>; + }; }; reserved_memory: reserved-memory { diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 59702ba24f35..358827c2fbd3 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -27,8 +27,8 @@ phy-handle = <&phy1>; phy-mode = "rgmii"; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; compatible = "snps,dwmac-mdio"; phy1: phy@4 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts index 9e9fd4b8023e..1d22f87fd238 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -448,6 +448,29 @@ status = "okay"; }; +&sdhc { + pinctrl-0 = <&sdc_on_state>; + pinctrl-1 = <&sdc_off_state>; + pinctrl-names = "default", "sleep"; + + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + non-removable; + no-sd; + no-sdio; + + supports-cqe; + + vmmc-supply = <&vreg_l10a_2p95>; + vqmmc-supply = <&vreg_l7a_1p8>; + + status = "okay"; +}; + &uart7 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index fb553f0bb17a..1c0e5d271e91 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -852,6 +852,53 @@ #hwlock-cells = <1>; }; + sdhc: mmc@8804000 { + compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>, + <0x0 0x08805000 0x0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC5_AHB_CLK>, + <&gcc GCC_SDCC5_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC5_BCR>; + + interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + power-domains = <&rpmhpd QDU1000_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + bus-width = <8>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <6528000 1652800>; + opp-avg-kBps = <400000 0>; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,qdu1000-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; @@ -1110,10 +1157,73 @@ pins = "gpio31"; function = "gpio"; }; + + sdc_on_state: sdc-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc_off_state: sdc-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + }; + + sram@14680000 { + compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x1000>; + ranges = <0 0 0x14680000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; }; apps_smmu: iommu@15000000 { - compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500"; + compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -1252,6 +1362,7 @@ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index dc80f0bca767..e23a0406eacc 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -5,7 +5,9 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "sm4250.dtsi" +#include "pm6125.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -19,21 +21,257 @@ stdout-path = "serial0:115200n8"; }; - vph_pwr: vph-pwr-regulator { + clocks { + clk40M: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-user0 { + label = "green:user0"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { + compatible = "regulator-fixed"; + regulator-name = "VREG_HDMI_OUT_1P2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_1v2>; + regulator-always-on; + regulator-boot-on; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + /* Main barrel jack input */ + vdc_12v: regulator-vdc-12v { + compatible = "regulator-fixed"; + regulator-name = "DC_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* 1.2V supply stepped down from the barrel jack input */ + vdc_1v2: regulator-vdc-1v2 { + compatible = "regulator-fixed"; + regulator-name = "VDC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 3.3V supply stepped down from the barrel jack input */ + vdc_3v3: regulator-vdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 5V supply stepped down from the barrel jack input */ + vdc_5v: regulator-vdc-5v { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* "Battery" voltage for the SoM, stepped down from the barrel jack input */ + vdc_vbat_som: regulator-vdc-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + /* PMI632 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; + vin-supply = <&vdc_vbat_som>; regulator-always-on; regulator-boot-on; }; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_hdmi_out_1p2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l18a_1p232>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pm6125_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qrb4210/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qrb4210/cdsp.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm6125-regulators"; @@ -86,6 +324,7 @@ vreg_l5a_2p96: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; vreg_l6a_0p6: l6 { @@ -116,6 +355,7 @@ vreg_l11a_1p8: l11 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1952000>; + regulator-allow-set-load; }; vreg_l12a_1p8: l12 { @@ -190,6 +430,10 @@ }; &sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l24a_2p96>; vqmmc-supply = <&vreg_l11a_1p8>; no-sdio; @@ -199,7 +443,12 @@ }; &sdhc_2 { - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */ + + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l22a_2p96>; vqmmc-supply = <&vreg_l5a_2p96>; no-sdio; @@ -207,21 +456,78 @@ status = "okay"; }; +&spi5 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk40M>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &sleep_clk { clock-frequency = <32000>; }; &tlmm { - gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, - <49 1>, <52 1>, <54 1>, + gpio-reserved-ranges = <43 2>, <49 1>, <54 1>, <56 3>, <61 2>, <64 1>, <68 1>, <72 8>, <96 1>; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio41"; + function = "gpio"; + input-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio46"; + function = "gpio"; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart4 { status = "okay"; }; +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l15a_3p128>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index dd924331b0ee..9022ad726741 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -535,30 +535,6 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l9a_1p2>; - -#if 0 - qcom,dual-dsi-mode; - qcom,master-dsi; -#endif - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l5a_0p88>; -}; - &gmu { status = "okay"; }; @@ -604,7 +580,7 @@ reg = <0>; lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -613,7 +589,7 @@ reg = <1>; lt9611_b: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; #endif @@ -639,8 +615,28 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; }; &pm8150_adc { diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 15e1ae1c1a97..5e4287f8c8cd 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -47,29 +47,6 @@ vin-supply = <&vreg_3p3>; }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - snps,tx-sched-wrr; - - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - }; }; &apps_rsc { @@ -352,19 +329,40 @@ max-speed = <1000>; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; /* Micrel KSZ9031RNZ PHY */ rgmii_phy: phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x7>; - interrupt-parent = <&tlmm>; - interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; - compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 24fa449d48a6..5a26974dcf8f 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -151,6 +151,185 @@ }; }; +ðernet0 { + snps,mtl-rx-config = <ðernet0_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet0_mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; + + ethernet0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <ðernet1_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet1_mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + ethernet1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_default>; @@ -316,6 +495,66 @@ /* PINCTRL */ &tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + i2c0_default: i2c0-default-state { /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ pins = "gpio135", "gpio136"; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index 4a990fda8fc3..bacbdec56281 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -167,6 +167,14 @@ }; }; +&gpucc { + status = "disabled"; +}; + +&gpu_smmu { + status = "disabled"; +}; + &pcie2a { compatible = "qcom,pcie-sa8540p"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi index 7602cca47bae..3c3b6287cd27 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -88,6 +88,14 @@ }; }; }; + + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; }; &spmi_bus { @@ -108,8 +116,6 @@ compatible = "qcom,pmk8350-pon"; reg = <0x1200>, <0x800>; reg-names = "hlos", "pbs"; - mode-recovery = <0x1>; - mode-bootloader = <0x2>; pmm8654au_0_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; @@ -135,6 +141,19 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmm8654au_0_sdam_0: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; }; pmm8654au_1: pmic@2 { diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index f238a02a5448..ab767cfa51ff 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sa8775p.dtsi" @@ -18,8 +19,10 @@ serial0 = &uart10; serial1 = &uart12; serial2 = &uart17; + i2c11 = &i2c11; i2c18 = &i2c18; spi16 = &spi16; + ufshc1 = &ufs_mem_hc; }; chosen { @@ -258,6 +261,13 @@ }; }; +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + &i2c18 { clock-frequency = <400000>; pinctrl-0 = <&qup_i2c18_default>; @@ -291,6 +301,13 @@ "BT_EN", "USB2_PWR_EN", "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; }; &pmm8654au_2_gpios { @@ -306,6 +323,20 @@ "USB1_PWR_ENABLE", "USB1_FAULT", "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; }; &pmm8654au_3_gpios { @@ -347,6 +378,13 @@ bias-disable; }; + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + qup_i2c18_default: qup-i2c18-state { pins = "gpio95", "gpio96"; function = "qup2_se4"; @@ -426,6 +464,94 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index c3310caf9f68..b130136acffe 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -7,7 +7,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -308,6 +310,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -469,8 +476,8 @@ <0>, <0>, <0>, - <0>, - <0>, + <&usb_0_qmpphy>, + <&usb_1_qmpphy>, <0>, <0>, <0>, @@ -503,6 +510,111 @@ #size-cells = <2>; status = "disabled"; + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x880000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x880000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x888000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + spi16: spi@888000 { compatible = "qcom,geni-spi"; reg = <0x0 0x00888000 0x0 0x4000>; @@ -524,6 +636,48 @@ status = "disabled"; }; + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart17: serial@88c000 { compatible = "qcom,geni-uart"; reg = <0x0 0x0088c000 0x0 0x4000>; @@ -559,6 +713,391 @@ #size-cells = <0>; status = "disabled"; }; + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x890000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x894000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x894000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c20: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x898000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi20: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x898000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x403 0x0>; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x980000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x980000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x994000 0x0 0x4000>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; }; qupv3_id_1: geniqup@ac0000 { @@ -573,6 +1112,189 @@ iommus = <&apps_smmu 0x443 0x0>; status = "disabled"; + i2c7: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi7: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c8: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi8: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c9: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi9: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + uart9: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa88000 0x0 0x4000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c10: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi10: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart10: serial@a8c000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a8c000 0x0 0x4000>; @@ -589,6 +1311,90 @@ status = "disabled"; }; + i2c11: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi11: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c12: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi12: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart12: serial@a94000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a94000 0x0 0x4000>; @@ -603,6 +1409,376 @@ power-domains = <&rpmhpd SA8775P_CX>; status = "disabled"; }; + + i2c13: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa98000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_3: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xbc0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c21: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xb80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi21: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xb80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + iommus = <&apps_smmu 0x100 0x0>; + dma-coherent; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sa8775p-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe10>; + /* + * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It + * enables the CXO clock to eDP *and* UFS PHY. + */ + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_0_hsphy: phy@88e4000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e4000 0 0x120>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0_qmpphy: phy@88e8000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088e8000 0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x080 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_RISING>, + <&pdc 7 IRQ_TYPE_EDGE_RISING>, + <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xe000>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0a0 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2: usb@a4f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xe000>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x020 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -611,6 +1787,56 @@ #hwlock-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sa8775p-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>, @@ -658,6 +1884,16 @@ interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + #clock-cells = <0>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x1100>, @@ -829,6 +2065,80 @@ <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; }; + pcie_smmu: iommu@15200000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15200000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ @@ -840,6 +2150,13 @@ redistributor-stride = <0x0 0x20000>; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + memtimer: timer@17c20000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts new file mode 100644 index 000000000000..b637b4270f88 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7180.dtsi" + +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &ipa_fw_mem; + +/ { + model = "Acer Aspire 1"; + compatible = "acer,aspire1", "qcom,sc7180"; + chassis-type = "laptop"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + zap_mem: zap-shader@80840000 { + reg = <0x0 0x80840000 0 0x2000>; + no-map; + }; + + venus_mem: venus@85b00000 { + reg = <0x0 0x85b00000 0 0x500000>; + no-map; + }; + + mpss_mem: mpss@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + adsp_mem: adsp@8e400000 { + reg = <0x0 0x8e400000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: wlan@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&_sd_mode_default>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86_bridge 1000000>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&soc_bkoff_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p2: bridge-1p2-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p2_en_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p8: bridge-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_l8c_1p8>; + + gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p8_en_default>; + pinctrl-names = "default"; + }; + + reg_codec_3p3: codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "codec_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_audio_en_default>; + pinctrl-names = "default"; + }; + + reg_lcm_3p3: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcm_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_lcm_en_default>; + pinctrl-names = "default"; + }; + + reg_tp_3p3: touchpad-regulator { + compatible = "regulator-fixed"; + regulator-name = "tp_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tp_en_default>; + pinctrl-names = "default"; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* embedded-controller@76 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* + * NOTE: DSDT defines two possible touchpads, other one is + * + * reg = <0x15>; + * hid-descr-addr = <0x1>; + */ + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + vdd-supply = <®_tp_3p3>; + + interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_touchpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_keyboard_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-0 = <&codec_irq_default>; + pinctrl-names = "default"; + + AVDD-supply = <&vreg_l15a_1p8>; + MICVDD-supply = <®_codec_3p3>; + VBAT-supply = <®_codec_3p3>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + sn65dsi86_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&bridge_en_default>, + <&edp_bridge_irq_default>, + <&bridge_suspend_default>; + pinctrl-names = "default"; + + vpll-supply = <®_brij_1p8>; + vccio-supply = <®_brij_1p8>; + vcca-supply = <®_brij_1p2>; + vcc-supply = <®_brij_1p2>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <®_lcm_3p3>; + backlight = <&backlight>; + hpd-absent-delay-ms = <200>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&zap_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l4a_0p8>; + status = "okay"; +}; + +&pm6150_adc { + thermistor@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + charger-thermistor@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6150_pon { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&uart3 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + peer-hub = <&usb_hub_3_x>; + }; + + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&qup_i2c2_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c4_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c9_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c10_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&tlmm { + /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>; + + amp_sd_mode_default: amp-sd-mode-deault-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_en_default: bridge-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_suspend_default: bridge-suspend-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + codec_irq_default: codec-irq-deault-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_bridge_irq_default: edp-bridge-irq-default-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hid_keyboard_default: hid-keyboard-default-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hid_touchpad_default: hid-touchpad-default-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + function = "gpio"; + bias-pull-down; + }; + + rts-pins { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + function = "gpio"; + bias-pull-down; + }; + + tx-pins { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + function = "gpio"; + bias-pull-up; + }; + + rx-pins { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + }; + }; + + reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state { + pins = "gpio19"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_lcm_en_default: reg-lcm-en-deault-state { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_audio_en_default: reg-audio-en-deault-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tp_en_default: reg-tp-en-deault-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + soc_bkoff_default: soc-bkoff-deault-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <16>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 9f052270e090..a1c50be4ad95 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -295,7 +295,11 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l3c_1p2>; @@ -314,7 +318,7 @@ port { panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -329,19 +333,11 @@ }; }; -&dsi_phy { +&mdss_dsi0_phy { status = "okay"; vdds-supply = <&vreg_l4a_0p8>; }; -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &qfprom { vcc-supply = <&vreg_l11a_1p8>; }; @@ -393,6 +389,11 @@ qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; }; +&scm { + /* TF-A firmware maps memory cached so mark dma-coherent to match. */ + dma-coherent; +}; + &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index 5aa7949b5328..bede23369fed 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -46,10 +46,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&dsi0_out { - remote-endpoint = <&ps8640_in>; -}; - edp_brij_i2c: &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -74,7 +70,7 @@ edp_brij_i2c: &i2c2 { port@0 { reg = <0>; ps8640_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -102,6 +98,10 @@ edp_brij_i2c: &i2c2 { }; }; +&mdss_dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + &tlmm { edp_brij_ps8640_rst: edp-brij-ps8640-rst-state { pins = "gpio11"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts index 5c81e44ed4a5..0a7f2286b541 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts @@ -15,7 +15,7 @@ compatible = "google,quackingstick-sku1537", "qcom,sc7180"; }; -&dsi_phy { +&mdss_dsi0_phy { qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; qcom,phy-drive-ldo-level = <375>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 8e7b42f843d4..62ab6427dd65 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -52,7 +52,31 @@ }; }; -&dsi0 { +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&mdss_dsi0 { panel: panel@0 { /* Compatible will be filled in per-board */ reg = <0>; @@ -67,7 +91,7 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -82,30 +106,6 @@ }; }; -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - &sdhc_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index e52b8776755d..b0c3be4c3bb4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -27,10 +27,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&dsi0_out { - remote-endpoint = <&sn65dsi86_in>; -}; - edp_brij_i2c: &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -65,7 +61,7 @@ edp_brij_i2c: &i2c2 { port@0 { reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -95,6 +91,10 @@ edp_brij_i2c: &i2c2 { }; }; +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; +}; + &tlmm { edp_brij_irq: edp-brij-irq-state { pins = "gpio11"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts index c5b0658bd632..6eeead70d3eb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -17,7 +17,7 @@ compatible = "google,wormdingler-sku1024", "qcom,sc7180"; }; -&dsi_phy { +&mdss_dsi0_phy { qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; qcom,phy-drive-ldo-level = <450>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 262d6691abd9..2efa8a4bcda6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -110,7 +110,28 @@ }; }; -&dsi0 { +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&mdss_dsi0 { panel: panel@0 { reg = <0>; @@ -126,7 +147,7 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -141,27 +162,6 @@ }; }; -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@1 { - compatible = "hid-over-i2c"; - reg = <0x01>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - - post-power-on-delay-ms = <70>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - vddl-supply = <&pp1800_ts>; - }; -}; - &pm6150_adc { skin-temp-thermistor@4d { reg = <ADC5_AMUX_THM1_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index ca6920de7ea8..681637cf6c4a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -705,20 +705,6 @@ ap_h1_spi: &spi0 { status = "disabled"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; -}; - -&dsi_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - ap_sar_sensor_i2c: &i2c5 { clock-frequency = <400000>; @@ -788,6 +774,10 @@ hp_i2c: &i2c9 { }; }; +&lpasscc { + status = "okay"; +}; + &lpass_cpu { status = "okay"; @@ -813,7 +803,7 @@ hp_i2c: &i2c9 { }; }; -&mdp { +&lpass_hm { status = "okay"; }; @@ -832,6 +822,20 @@ hp_i2c: &i2c9 { link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + &pm6150_adc { charger-thermistor@4f { reg = <ADC5_AMUX_THM3_100K_PU>; @@ -892,6 +896,11 @@ hp_i2c: &i2c9 { qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; }; +&scm { + /* TF-A firmware maps memory cached so mark dma-coherent to match. */ + dma-coherent; +}; + &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f479cab8ab45..e25dc2bb52a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -369,7 +369,7 @@ }; firmware { - scm { + scm: scm { compatible = "qcom,scm-sc7180", "qcom,scm"; }; }; @@ -2700,6 +2700,7 @@ qspi: spi@88dc000 { compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; + iommus = <&apps_smmu 0x20 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; @@ -2997,8 +2998,6 @@ interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -3006,7 +3005,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; @@ -3043,7 +3042,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -3066,12 +3065,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC7180_CX>; - phys = <&dsi_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -3084,14 +3083,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -3116,13 +3115,13 @@ }; }; - dsi_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, <0 0x0ae94a00 0 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", + reg-names = "dsi0_phy", + "dsi0_phy_lane", "dsi_pll"; #clock-cells = <1>; @@ -3213,8 +3212,8 @@ reg = <0 0x0af00000 0 0x200000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&dsi_phy 0>, - <&dsi_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -3636,6 +3635,8 @@ power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; #clock-cells = <1>; #power-domain-cells = <1>; + + status = "reserved"; /* Controlled by ADSP */ }; lpass_cpu: lpass@62d87000 { @@ -3684,6 +3685,8 @@ #clock-cells = <1>; #power-domain-cells = <1>; + + status = "reserved"; /* Controlled by ADSP */ }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index f562e4d2b655..2e1cd219fc18 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -79,6 +79,11 @@ firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; }; +&scm { + /* TF-A firmware maps memory cached so mark dma-coherent to match. */ + dma-coherent; +}; + &wifi { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 5b1c175c47f1..9ea6636125ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -467,10 +467,6 @@ ap_i2c_tpm: &i2c14 { link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; -&mdss_mdp { - status = "okay"; -}; - /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 2fd1d3c0eb34..a0e8db8270e7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -649,6 +649,18 @@ }; }; + eud_typec: connector { + compatible = "usb-c-connector"; + + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -656,7 +668,7 @@ }; firmware { - scm { + scm: scm { compatible = "qcom,scm-sc7280", "qcom,scm"; }; }; @@ -3430,6 +3442,7 @@ phy-names = "usb2-phy"; maximum-speed = "high-speed"; usb-role-switch; + port { usb2_role_switch: endpoint { remote-endpoint = <&eud_ep>; @@ -3441,6 +3454,7 @@ qspi: spi@88dc000 { compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x1000>; + iommus = <&apps_smmu 0x20 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -3605,10 +3619,11 @@ }; eud: eud@88e0000 { - compatible = "qcom,sc7280-eud","qcom,eud"; - reg = <0 0x088e0000 0 0x2000>, - <0 0x088e2000 0 0x1000>; + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3619,6 +3634,7 @@ remote-endpoint = <&usb2_role_switch>; }; }; + port@1 { reg = <1>; eud_con: endpoint { @@ -3628,21 +3644,6 @@ }; }; - eud_typec: connector { - compatible = "usb-c-connector"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - con_eud: endpoint { - remote-endpoint = <&eud_con>; - }; - }; - }; - }; - nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc"; @@ -3880,8 +3881,6 @@ interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -3889,7 +3888,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; @@ -3974,14 +3973,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts new file mode 100644 index 000000000000..fe3b366e1435 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Lenovo Flex 5G"; + compatible = "lenovo,flex-5g", "qcom,sc8180x"; + + aliases { + serial0 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bl_pwm_default>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_active_state>; + pinctrl-names = "default"; + + lid { + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x3000000>; + no-map; + }; + + adsp_mem: adsp-region@90800000 { + reg = <0x0 0x90800000 0x0 0x1c00000>; + no-map; + }; + + gpu_mem: gpu-region@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + cdsp_mem: cdsp-region@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + pinctrl-names = "default"; + + status = "okay"; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + pinctrl-names = "default"; + + status = "okay"; + + hid@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-0 = <&edp_hpd_active>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + no-hpd; + + backlight = <&backlight>; + + ports { + port { + auo_b140han06_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b140han06_in>; + }; + }; + }; +}; + +&pcie3 { + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie3_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + memory-region = <&cdsp_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn"; + + status = "okay"; +}; + +&uart13 { + pinctrl-0 = <&uart13_state>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default: bl-pwm-default-state { + en-pins { + pins = "gpio8"; + function = "normal"; + }; + + pwm-pins { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + i2c1_active: i2c1-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + bias-pull-up = <1>; + drive-strength = <2>; + }; + + i2c1_hid_active: i2c1-hid-active-state { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_active: i2c7-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_hid_active: i2c7-hid-active-state { + pins = "gpio37", "gpio24"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcie3_default_state: pcie3-default-state { + clkreq-pins { + pins = "gpio179"; + function = "pci_e3"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio178"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio180"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart13_state: uart13-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi new file mode 100644 index 000000000000..8247af01c84a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +/ { + thermal-zones { + pmc8180-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmc8180_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmc8180c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmc8180c_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmc8180_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pmc8180_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmc8180_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8180_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmc8180_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + + pmc8180_gpios: gpio@c000 { + compatible = "qcom,pmc8180-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmc8180", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@2 { + compatible = "qcom,smb2351", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + vcoin@85 { + reg = <0x85>; + qcom,pre-scaling = <1 1>; + label = "vcoin2"; + }; + }; + }; + + pmic@6 { + compatible = "qcom,pm8150c", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@a { + compatible = "qcom,smb2351", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + vcoin@85 { + reg = <0x85>; + qcom,pre-scaling = <1 1>; + label = "vcoin"; + }; + }; + }; + + pmic@4 { + compatible = "qcom,pm8150c", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmc8180c_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8180c_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmc8180c_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmc8180c_gpios: gpio@c000 { + compatible = "qcom,pmc8180c-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pmc8180c", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + + pmc8180c_lpg: lpg { + compatible = "qcom,pmc8180c-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts new file mode 100644 index 000000000000..fc038474cb71 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Qualcomm SC8180x Primus"; + compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; + + aliases { + serial0 = &uart12; + serial1 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwm_default>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_active_state>; + + lid-switch { + gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + adsp_mem: adsp-region@96e00000 { + reg = <0x0 0x96e00000 0x0 0x1c00000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + gpu_mem: gpu-region@98a00000 { + reg = <0x0 0x98a00000 0x0 0x2000>; + no-map; + }; + + reserved-region@9a500000 { + reg = <0x0 0x9a500000 0x0 0x600000>; + no-map; + }; + }; + + vreg_nvme_0p9: nvme-0p9-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_nvme_0p9"; + + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-always-on; + }; + + vreg_nvme_3p3: nvme-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_nvme_3p3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8180c_gpios 11 0>; + enable-active-high; + + regulator-always-on; + }; + + vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_kb_tp_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + + pinctrl-names = "default"; + pinctrl-0 = <&kb_tp_3v3_en_active_state>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p8: smps8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_3p3: ldo4 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12e: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_i2c_active_state>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + vdd-supply = <&vreg_l4c_3p3>; + vddl-supply = <&vreg_l12e>; + + post-power-on-delay-ms = <20>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_active_state>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&aux_i2c_active_state>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_active_state>; + + vdd-supply = <&vdd_kb_tp_3v3>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&kb_int_active_state>; + + vdd-supply = <&vdd_kb_tp_3v3>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd_active>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + + ports { + port { + auo_b133han05_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b133han05_in>; + }; + }; + }; +}; + +&pcie1 { + perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/qcmpss8180.mbn"; + + status = "okay"; +}; + +&uart12 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart13 { + pinctrl-names = "default"; + pinctrl-0 = <&uart13_state>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default: bl-pwm-default-state { + en-pins { + pins = "gpio8"; + function = "normal"; + }; + + pwm-pins { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + aux_i2c_active_state: aux-i2c-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-disable; + drive-strength = <16>; + }; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + kb_int_active_state: kb-int-active-state { + int-n-pins { + pins = "gpio37"; + function = "gpio"; + + bias-pull-up; + intput-enable; + }; + + kp-disable-pins { + pins = "gpio135"; + function = "gpio"; + + output-high; + }; + }; + + kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state { + pins = "gpio4"; + function = "gpio"; + + bias-disable; + }; + + pcie2_default_state: pcie2-default-state { + clkreq-pins { + pins = "gpio176"; + function = "pci_e2"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio175"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio177"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + tp_int_active_state: tp-int-active-state { + tp-int-pins { + pins = "gpio24"; + function = "gpio"; + + bias-disable; + input-enable; + }; + + tp-close-n-pins { + pins = "gpio116"; + function = "gpio"; + + bias-disable; + input-enable; + }; + }; + + ts_active_state: ts-active-state { + int-n-pins { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + reset-n-pins { + pins = "gpio54"; + function = "gpio"; + + output-high; + }; + }; + + ts_i2c_active_state: ts-i2c-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + /* External pull up */ + bias-disable; + drive-strength = <2>; + }; + + uart13_state: uart13-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi new file mode 100644 index 000000000000..d3ae18535636 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -0,0 +1,4032 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,dispcc-sm8250.h> +#include <dt-bindings/clock/qcom,gcc-sc8180x.h> +#include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sc8180x.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_300: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_400: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_500: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_600: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_700: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <800000 9600000>; + }; + + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-peak-kBps = <800000 12902400>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 12902400>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <800000 15974400>; + }; + + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <1804000 19660800>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <1804000 19660800>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <1804000 22732800>; + }; + + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <2188000 25804800>; + }; + + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <2188000 31948800>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <3072000 31948800>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 15974400>; + }; + + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 19660800>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <2188000 22732800>; + }; + + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 25804800>; + }; + + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <4068000 31948800>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <4068000 31948800>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <4068000 40550400>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 40550400>; + }; + + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <4068000 43008000>; + }; + + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <6220000 49152000>; + }; + + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 49152000>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <8368000 49152000>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2918400000 { + opp-hz = /bits/ 64 <2918400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8180x", "qcom,scm"; + }; + }; + + camnoc_virt: interconnect-camnoc-virt { + compatible = "qcom,sc8180x-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8180x-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qup_virt: interconnect-qup-virt { + compatible = "qcom,sc8180x-qup-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: xbl@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: aop@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: cmd-db@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + reserved@85f40000 { + reg = <0x0 0x85f40000 0x0 0x10000>; + no-map; + }; + + smem_mem: smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + reserved@89b00000 { + reg = <0x0 0x89b00000 0x0 0x1c00000>; + no-map; + }; + + reserved@9d400000 { + reg = <0x0 0x9d400000 0x0 0x1000000>; + no-map; + }; + + reserved@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + + reserved@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + modem_smp2p_ipa_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_ipa_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + modem_smp2p_wlan_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8180x"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x4c3 0>; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x603 0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c16: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart16: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x7a3 0>; + status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@c80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@c80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@c84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@c84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@c88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart19: serial@c88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@c8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart13: serial@c8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@c90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart14: serial@c90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@c94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart15: serial@c94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sc8180x-config-noc"; + reg = <0 0x01500000 0 0x7400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sc8180x-system-noc"; + reg = <0 0x01620000 0 0x19400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc8180x-aggre1-noc"; + reg = <0 0x016e0000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sc8180x-aggre2-noc"; + reg = <0 0x01700000 0 0x20000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1720000 { + compatible = "qcom,sc8180x-compute-noc"; + reg = <0 0x01720000 0 0x7000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sc8180x-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy-wrapper@1c06000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx0 */ + <0 0x1c06400 0 0x200>, /* rx0 */ + <0 0x1c06a00 0 0x1f0>, /* pcs */ + <0 0x1c06600 0 0x170>, /* tx1 */ + <0 0x1c06800 0 0x200>, /* rx1 */ + <0 0x1c06e00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + }; + }; + + pcie3: pci@1c08000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <3>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_3_PIPE_CLK>, + <&gcc GCC_PCIE_3_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_3_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_3_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie3_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3_phy: phy-wrapper@1c0c000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c0c000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_CLKREF_CLK>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_3_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie3_lane: phy@1c0c200 { + reg = <0 0x1c0c200 0 0x170>, /* tx0 */ + <0 0x1c0c400 0 0x200>, /* rx0 */ + <0 0x1c0ca00 0 0x1f0>, /* pcs */ + <0 0x1c0c600 0 0x170>, /* tx1 */ + <0 0x1c0c800 0 0x200>, /* rx1 */ + <0 0x1c0ce00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_3_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_3_pipe_clk"; + #phy-cells = <0>; + }; + }; + + pcie1: pci@1c10000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x68000000 0 0xf1d>, + <0 0x68000f20 0 0xa8>, + <0 0x68001000 0 0x1000>, + <0 0x68100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>, + <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy-wrapper@1c16000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + }; + }; + + pcie2: pci@1c18000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c18000 0 0x3000>, + <0 0x70000000 0 0xf1d>, + <0 0x70000f20 0 0xa8>, + <0 0x70001000 0 0x1000>, + <0 0x70100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <4>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_2_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2_phy: phy-wrapper@1c1c000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c1c000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_CLKREF_CLK>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: phy@1c0e200 { + reg = <0 0x1c1c200 0 0x170>, /* tx0 */ + <0 0x1c1c400 0 0x200>, /* rx0 */ + <0 0x1c1ca00 0 0x1f0>, /* pcs */ + <0 0x1c1c600 0 0x170>, /* tx1 */ + <0 0x1c1c800 0 0x200>, /* rx1 */ + <0 0x1c1ce00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + + #phy-cells = <0>; + }; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc8180x-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x300 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy-wrapper@1d87000 { + compatible = "qcom,sc8180x-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sc8180x-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + gpu: gpu@2c00000 { + compatible = "qcom,adreno-680.1", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0xc01>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-461000000 { + opp-hz = /bits/ 64 <461000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-405000000 { + opp-hz = /bits/ 64 <405000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-177000000 { + opp-hz = /bits/ 64 <177000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible="qcom,adreno-gmu-680.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", + "gmu_pdc", + "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0xc00>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sc8180x-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sc8180x-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sc8180x-tlmm"; + reg = <0 0x03100000 0 0x300000>, + <0 0x03500000 0 0x700000>, + <0 0x03d00000 0 0x300000>; + reg-names = "west", "east", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 191>; + wakeup-parent = <&pdc>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc8180x-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>, + <&rpmhpd SC8180X_MSS>; + power-domain-names = "cx", "mss"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sc8180x-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>; + power-domain-names = "cx"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + + usb_prim_hsphy: phy@88e2000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_sec_hsphy: phy@88e3000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_prim_qmpphy: phy@88e9000 { + compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; + reg-names = "reg-base", "dp_com"; + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", + "ref_clk_src", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_prim_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + }; + + usb_prim_dpphy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_sec_qmpphy: phy@88ee000 { + compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; + reg = <0 0x088ee000 0 0x18c>, + <0 0x088ed000 0 0x10>, + <0 0x088ef000 0 0x40>; + reg-names = "reg-base", "dp_com"; + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", + "ref_clk_src", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_sec_ssphy: usb3-phy@88e9200 { + reg = <0 0x088ee200 0 0x200>, + <0 0x088ee400 0 0x200>, + <0 0x088eec00 0 0x218>, + <0 0x088ee600 0 0x200>, + <0 0x088ee800 0 0x200>, + <0 0x088eea00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + }; + + usb_sec_dpphy: dp-phy@88ef200 { + reg = <0 0x088ef200 0 0x200>, + <0 0x088ef400 0 0x200>, + <0 0x088efa00 0 0x200>, + <0 0x088ef600 0 0x200>, + <0 0x088ef800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + clock-output-names = "qmp_dptx1_phy_pll_link_clk", + "qmp_dptx1_phy_pll_vco_div_clk"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8180x-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sc8180x-gem-noc"; + reg = <0 0x09680000 0 0x58200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_prim: usb@a6f8800 { + compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "mock_utmi", + "sleep", + "xo"; + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc USB30_PRIM_GDSC>; + + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + status = "disabled"; + + usb_prim_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x140 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_sec: usb@a8f8800 { + compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "mock_utmi", + "sleep", + "xo"; + resets = <&gcc GCC_USB30_SEC_BCR>; + power-domains = <&gcc USB30_SEC_GDSC>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + status = "disabled"; + + usb_sec_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sc8180x-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "nrt_bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x800 0x420>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sc8180x-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@4 { + reg = <4>; + dpu_intf4_out: endpoint { + remote-endpoint = <&dp1_in>; + }; + }; + + port@5 { + reg = <5>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sc8180x-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae90a00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>; + + phys = <&usb_prim_dpphy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp0_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,sc8180x-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae98a00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <13>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>; + assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>; + + phys = <&usb_sec_dpphy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp0_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp1_in: endpoint { + remote-endpoint = <&dpu_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp: displayport-controller@ae9a000 { + compatible = "qcom,sc8180x-edp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9aa00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <14>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>; + + phys = <&edp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + edp_phy: phy@aec2a00 { + compatible = "qcom,sc8180x-edp-phy"; + reg = <0 0x0aec2a00 0 0x1c0>, + <0 0x0aec2200 0 0xa0>, + <0 0x0aec2600 0 0xa0>, + <0 0x0aec2000 0 0x19c>; + + clocks = <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + power-domains = <&dispcc MDSS_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc8180x-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_prim_dpphy 0>, + <&usb_prim_dpphy 1>, + <&usb_sec_dpphy 0>, + <&usb_sec_dpphy 1>, + <&edp_phy 0>, + <&edp_phy 1>; + clock-names = "bi_tcxo", + "sleep_clk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + power-domains = <&rpmhpd SC8180X_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8180x-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <9>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>; + + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sc8180x-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>; + power-domain-names = "cx"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sc8180x-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17c21000{ + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c26000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8180x-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8180x-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sc8180x-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + lmh@18350800 { + compatible = "qcom,sc8180x-lmh"; + reg = <0 0x18350800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh@18358800 { + compatible = "qcom,sc8180x-lmh"; + reg = <0 0x18358800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0640 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 5b25d54b9591..b566e403d1db 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -64,7 +64,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -99,7 +99,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -210,6 +210,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -308,6 +313,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l7c: ldo7 { regulator-name = "vreg_l7c"; regulator-min-microvolt = <2504000>; @@ -318,6 +330,13 @@ RPMH_REGULATOR_MODE_HPM>; }; + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l13c: ldo13 { regulator-name = "vreg_l13c"; regulator-min-microvolt = <3072000>; @@ -376,6 +395,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; @@ -386,7 +414,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -395,7 +423,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -600,6 +628,19 @@ status = "okay"; }; +&sdc2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &uart17 { compatible = "qcom,geni-debug-uart"; @@ -644,9 +685,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -671,9 +722,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; @@ -842,6 +903,60 @@ }; }; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index bdcba719fc38..7cc3028440b6 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -106,7 +106,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -141,7 +141,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -264,6 +264,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -518,6 +523,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; @@ -528,7 +542,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -537,7 +551,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -1114,9 +1128,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -1141,9 +1165,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index cc4aef21e617..ac0596dfdbc4 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -6,7 +6,9 @@ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -777,6 +779,36 @@ ranges = <0 0 0 0 0x10 0>; dma-ranges = <0 0 0 0 0x10 0>; + ethernet0: ethernet@20000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC0_AXI_CLK>, + <&gcc GCC_EMAC0_SLV_AHB_CLK>, + <&gcc GCC_EMAC0_PTP_CLK>, + <&gcc GCC_EMAC0_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x4c0 0xf>; + power-domains = <&gcc EMAC_0_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + gcc: clock-controller@100000 { compatible = "qcom,gcc-sc8280xp"; reg = <0x0 0x00100000 0x0 0x1f0000>; @@ -2310,6 +2342,180 @@ reg = <0x0 0x01fc0000 0x0 0x30000>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-690.0", "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>; + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <451000>; + }; + + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <1555000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <1555000>; + }; + + opp-547000000 { + opp-hz = /bits/ 64 <547000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <1555000>; + }; + + opp-606000000 { + opp-hz = /bits/ 64 <606000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <2736000>; + }; + + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <2736000>; + }; + + opp-655000000 { + opp-hz = /bits/ 64 <655000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <2736000>; + }; + + opp-690000000 { + opp-hz = /bits/ 64 <690000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <2736000>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x03de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&gpu_smmu 5 0xc00>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc8280xp-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + + power-domains = <&rpmhpd SC8280XP_GFX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpu_smmu: iommu@3da0000 { + compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + usb_0_hsphy: phy@88e5000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -2530,6 +2736,8 @@ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rxmacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "RX"; qcom,din-ports = <0>; @@ -2604,6 +2812,8 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; label = "WSA"; qcom,din-ports = <2>; @@ -2626,6 +2836,13 @@ status = "disabled"; }; + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x032a9000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; @@ -2635,6 +2852,8 @@ clocks = <&txmacro>; clock-names = "iface"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "TX"; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2828,6 +3047,56 @@ }; }; + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0 0x033e0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sdc2: mmc@8804000 { + compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4e0 0x0>; + power-domains = <&rpmhpd SC8280XP_CX>; + operating-points-v2 = <&sdc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + }; + usb_0_qmpphy: phy@88eb000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; reg = <0 0x088eb000 0 0x4000>; @@ -2848,6 +3117,23 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_0_qmpphy_dp_in: endpoint {}; + }; + }; }; usb_1_hsphy: phy@8902000 { @@ -2884,6 +3170,23 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint {}; + }; + }; }; mdss1_dp0_phy: phy@8909a00 { @@ -3908,7 +4211,7 @@ #size-cells = <2>; ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; reg = <0 0x17a40000 0 0x20000>; msi-controller; @@ -4720,6 +5023,36 @@ status = "disabled"; }; + + ethernet1: ethernet@23000000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x23000000 0x0 0x10000>, + <0x0 0x23016000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC1_AXI_CLK>, + <&gcc GCC_EMAC1_SLV_AHB_CLK>, + <&gcc GCC_EMAC1_PTP_CLK>, + <&gcc GCC_EMAC1_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x40 0xf>; + power-domains = <&gcc EMAC_1_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; }; sound: sound { diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 7459525d9982..0b23d5bb3f26 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -134,7 +134,7 @@ reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -183,25 +183,25 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l1a_1p225>; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&adv7533_in>; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l1b_0p925>; }; -&mdss { - status = "okay"; -}; - &mmss_smmu { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 2ca713a3902a..3033723fc6ff 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -138,11 +138,6 @@ no-map; }; - reserved@85800000 { - reg = <0x00 0x85800000 0x00 0x3700000>; - no-map; - }; - cont_splash_mem: splash@9d400000 { reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; no-map; @@ -256,6 +251,10 @@ linux,code = <KEY_VOLUMEUP>; }; +&qhee_code { + reg = <0x00 0x85800000 0x00 0x3700000>; +}; + &qusb2phy0 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index eaead2f7beb4..bba0f366ef03 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -550,7 +550,7 @@ }; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1463,8 +1463,8 @@ <&sleep_clk>, <&gcc GCC_MMSS_GPLL0_CLK>, <&gcc GCC_MMSS_GPLL0_DIV_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, <0>, <0>, <0>, @@ -1536,7 +1536,7 @@ port@0 { reg = <0>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; }; @@ -1572,7 +1572,7 @@ }; }; - dsi0: dsi@c994000 { + mdss_dsi0: dsi@c994000 { compatible = "qcom,sdm660-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c994000 0x400>; @@ -1586,8 +1586,8 @@ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, - <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -1608,7 +1608,7 @@ "pixel", "core"; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -1618,20 +1618,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@c994400 { + mdss_dsi0_phy: phy@c994400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c994400 0x100>, <0x0c994500 0x300>, @@ -1894,7 +1894,7 @@ }; }; - camss: camss@ca00000 { + camss: camss@ca00020 { compatible = "qcom,sdm660-camss"; reg = <0x0ca00020 0x10>, <0x0ca30000 0x100>, diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 70e683b7e4fc..301eca9a4f31 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -4,8 +4,10 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "sdm632.dtsi" #include "pm8953.dtsi" +#include "pmi632.dtsi" / { model = "Fairphone 3"; @@ -83,6 +85,33 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pmi632_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index f0f27fc12c18..f89b27c99f40 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -148,14 +148,14 @@ port@1 { reg = <1>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; &mdss { - dsi1: dsi@c996000 { + mdss_dsi1: dsi@c996000 { compatible = "qcom,sdm660-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c996000 0x400>; @@ -170,8 +170,8 @@ assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, - <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE1_CLK>, @@ -192,7 +192,7 @@ "pixel", "core"; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -202,20 +202,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@c996400 { + mdss_dsi1_phy: phy@c996400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c996400 0x100>, <0x0c996500 0x300>, @@ -239,10 +239,10 @@ <&sleep_clk>, <&gcc GCC_MMSS_GPLL0_CLK>, <&gcc GCC_MMSS_GPLL0_DIV_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, <0>, <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index b61e13db89bd..a1c207c0266d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1282,6 +1282,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index d05c511718df..1ce413263b7f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -636,25 +636,6 @@ }; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - edp_brij_i2c: &i2c3 { status = "okay"; clock-frequency = <400000>; @@ -687,7 +668,7 @@ edp_brij_i2c: &i2c3 { port@0 { reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -767,6 +748,25 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + /* * Cheza fw does not properly program the GPU aperture to allow the * GPU to update the SMMU pagetables for context switches. Work diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index e14fe9bbb386..d6b464cb61d6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -415,25 +415,6 @@ firmware-name = "qcom/sdm845/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -489,7 +470,15 @@ reg = <0>; lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&mdss_dsi1_out>; }; }; @@ -520,6 +509,53 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l1a_0p875>; + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -649,10 +685,6 @@ }; }; -&pmi8998_rradc { - status = "okay"; -}; - /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { dai@22 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index d1440b790fa6..b2d4336e764b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -417,7 +417,43 @@ firmware-name = "qcom/sdm845/cdsp.mdt"; }; -&dsi0 { +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; @@ -448,33 +484,33 @@ port@0 { reg = <0>; truly_in_0: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; port@1 { reg = <1>; truly_in_1: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; }; }; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi0_pll>; }; -&dsi1 { +&mdss_dsi1 { status = "okay"; vdda-supply = <&vdda_mipi_dsi1_1p2>; qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; ports { port@1 { @@ -486,47 +522,11 @@ }; }; -&dsi1_phy { +&mdss_dsi1_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi1_pll>; }; -&gcc { - protected-clocks = <GCC_QSPI_CORE_CLK>, - <GCC_QSPI_CORE_CLK_SRC>, - <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <GCC_LPASS_Q6_AXI_CLK>, - <GCC_LPASS_SWAY_CLK>; -}; - -&gmu { - status = "okay"; -}; - -&gpu { - status = "okay"; - - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; -}; - -&ipa { - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 5c384345c05d..122c7128dea9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -336,44 +336,6 @@ firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - /* - * Both devices use different panels but all other properties - * are common. Compatible line is declared in device dts. - */ - display_panel: panel@0 { - status = "disabled"; - - reg = <0>; - - vddio-supply = <&vreg_l14a_1p88>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -452,6 +414,44 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + /* Modem/wifi */ &mss_pil { status = "okay"; @@ -480,7 +480,7 @@ }; }; -&pmi8998_rradc { +&pmi8998_charger { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 6cdda971bb4b..623a826b18a3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -51,6 +51,10 @@ }; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + &sound { model = "OnePlus 6"; audio-routing = "RX_BIAS", "MCLK", diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index d82c0d4407f0..9471ada0d6ad 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -47,6 +47,10 @@ "AMIC5", "MIC BIAS3"; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + /* * The TFA9894 codec is currently unsupported. * We need to delete the node to allow the soundcard diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 0ad891348e0c..dce0141f3719 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -411,44 +411,6 @@ firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - panel@0 { - compatible = "visionox,rm69299-shift"; - status = "okay"; - reg = <0>; - vdda-supply = <&vreg_l14a_1p88>; - vdd3p3-supply = <&vreg_l28a_3p0>; - - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active &sde_te_active>; - pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -494,6 +456,10 @@ }; }; +&i2c10 { + /* SMB1355@0x0C */ +}; + &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; @@ -505,6 +471,44 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + panel@0 { + compatible = "visionox,rm69299-shift"; + status = "okay"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + vdd3p3-supply = <&vreg_l28a_3p0>; + + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active &sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; @@ -522,6 +526,12 @@ }; }; +&pmi8998_charger { + monitored-battery = <&battery>; + + status = "okay"; +}; + &pm8998_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -554,6 +564,28 @@ }; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <100000>; + flash-max-microamp = <1100000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <100000>; + flash-max-microamp = <1100000>; + flash-max-timeout-us = <1280000>; + }; +}; + &qup_uart9_rx { drive-strength = <2>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 420ffede3e80..3bc187a066ae 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -368,43 +368,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vreg_l26a_1p2>; - status = "okay"; - - panel: panel@0 { - /* The compatible is assigned in device DTs. */ - reg = <0>; - - backlight = <&pmi8998_wled>; - vddio-supply = <&vreg_l14a_1p8>; - vsp-supply = <&lab>; - vsn-supply = <&ibb>; - panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; - pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; - pinctrl-names = "default", "sleep"; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vreg_l1a_0p9>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -515,6 +478,43 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &pm8998_gpios { focus_n: focus-n-state { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 5ed975cc6ecb..9d6faeb65624 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -115,6 +115,14 @@ }; }; + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + vreg_s4a_1p8: vreg-s4a-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_s4a_1p8"; @@ -223,39 +231,6 @@ firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p8>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - backlight = <&pmi8998_wled>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - status = "disabled"; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -298,6 +273,39 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p8>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + status = "disabled"; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; @@ -341,12 +349,14 @@ qcom,cabc; }; -&pm8998_resin { - linux,code = <KEY_VOLUMEDOWN>; +&pmi8998_charger { + monitored-battery = <&battery>; + status = "okay"; }; -&pmi8998_rradc { +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 8ae0ffccaab2..6db12abaa88d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -373,44 +373,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vdda_mipi_dsi0_1p2>; - status = "okay"; - - display_panel: panel@0 { - compatible = "jdi,fhd-nt35596s"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - vddio-supply = <&vreg_l14a_1p8>; - backlight = <&pmi8998_wled>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active>; - pinctrl-1 = <&sde_dsi_suspend>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vdda_mipi_dsi0_pll>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -483,6 +445,7 @@ }; rmi4-f12@12 { + reg = <0x12>; syna,rezero-wait-ms = <0xc8>; syna,clip-x-high = <0x438>; syna,clip-y-high = <0x870>; @@ -504,6 +467,44 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + &mss_pil { firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdeb05e95674..02a6ea0b8b2c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3899,6 +3899,7 @@ qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; reg = <0 0x088df000 0 0x600>; + iommus = <&apps_smmu 0x160 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -4238,7 +4239,7 @@ #reset-cells = <1>; }; - camss: camss@a00000 { + camss: camss@acb3000 { compatible = "qcom,sdm845-camss"; reg = <0 0x0acb3000 0 0x1000>, @@ -4509,14 +4510,14 @@ port@1 { reg = <1>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; @@ -4616,7 +4617,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4638,12 +4639,12 @@ "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -4656,20 +4657,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4688,7 +4689,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; @@ -4710,12 +4711,12 @@ "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -4728,20 +4729,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@ae96400 { + mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4903,10 +4904,10 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -5137,6 +5138,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -5221,7 +5223,7 @@ }; slimbam: dma-controller@17184000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; num-channels = <31>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 1326c171fe72..cfbc4fc1eba9 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -311,25 +311,6 @@ status = "okay"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -422,7 +403,7 @@ port@0 { reg = <0>; sn65dsi86_in_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -475,6 +456,25 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts new file mode 100644 index 000000000000..cbe5cdf5a228 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sdx75.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX75 IDP"; + compatible = "qcom,sdx75-idp", "qcom,sdx75"; + + aliases { + serial0 = &uart1; + }; +}; + +&chosen { + stdout-path = "serial0:115200n8"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <110 6>; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi new file mode 100644 index 000000000000..21d5d55da5eb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX75 SoC device tree source + * + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + chosen: chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_OFF: cpu-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <235>; + exit-latency-us = <428>; + min-residency-us = <1774>; + arm,psci-suspend-param = <0x40000003>; + local-timer-stop; + }; + + CPU_RAIL_OFF: cpu-rail-sleep-1 { + compatible = "arm,idle-state"; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + arm,psci-suspend-param = <0x40000004>; + local-timer-stop; + }; + + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; + entry-latency-us = <2761>; + exit-latency-us = <3964>; + min-residency-us = <8467>; + }; + + CLUSTER_SLEEP_2: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <2793>; + exit-latency-us = <4023>; + min-residency-us = <9826>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sdx75", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x800000>; + no-map; + }; + + hyp_elf_package_mem: hyp-elf-package@80800000 { + reg = <0x0 0x80800000 0x0 0x200000>; + no-map; + }; + + access_control_db_mem: access-control-db@81380000 { + reg = <0x0 0x81380000 0x0 0x80000>; + no-map; + }; + + qteetz_mem: qteetz@814e0000 { + reg = <0x0 0x814e0000 0x0 0x2a0000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@81780000 { + reg = <0x0 0x81780000 0x0 0xa00000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@87a00000 { + reg = <0x0 0x87a00000 0x0 0x1c0000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw@87c00000 { + reg = <0x0 0x87c00000 0x0 0x100000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@87d00000 { + reg = <0x0 0x87d00000 0x0 0x40000>; + no-map; + }; + + xbl_sc_mem: xbl-sc@87d40000 { + reg = <0x0 0x87d40000 0x0 0x40000>; + no-map; + }; + + modem_efs_shared_mem: modem-efs-shared@87d80000 { + reg = <0x0 0x87d80000 0x0 0x10000>; + no-map; + }; + + aop_image_mem: aop-image@87e00000 { + reg = <0x0 0x87e00000 0x0 0x20000>; + no-map; + }; + + smem_mem: smem@87e20000 { + reg = <0x0 0x87e20000 0x0 0xc0000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@87ee0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x87ee0000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@87f00000 { + reg = <0x0 0x87f00000 0x0 0x20000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@87f20000 { + reg = <0x0 0x87f20000 0x0 0x10000>; + no-map; + }; + + secdata_mem: secdata@87f30000 { + reg = <0x0 0x87f30000 0x0 0x1000>; + no-map; + }; + + tme_crashdump_mem: tme-crashdump@87f31000 { + reg = <0x0 0x87f31000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@87f71000 { + reg = <0x0 0x87f71000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@87f75000 { + reg = <0x0 0x87f75000 0x0 0x10000>; + no-map; + }; + + qdss_mem: qdss@88800000 { + reg = <0x0 0x88800000 0x0 0x300000>; + no-map; + }; + + audio_heap_mem: audio-heap@88b00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x88b00000 0x0 0x400000>; + no-map; + }; + + mpss_dsmharq_mem: mpss-dsmharq@88f00000 { + reg = <0x0 0x88f00000 0x0 0x5080000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 { + reg = <0x0 0x8df80000 0x0 0x80000>; + no-map; + }; + + mpssadsp_mem: mpssadsp@8e000000 { + reg = <0x0 0x8e000000 0x0 0xf400000>; + no-map; + }; + + gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 { + reg = <0x0 0xbdb00000 0x0 0x2000000>; + no-map; + }; + + smmu_debug_buf_mem: smmu-debug-buf@bfb00000 { + reg = <0x0 0xbfb00000 0x0 0x100000>; + no-map; + }; + + hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@80000 { + compatible = "qcom,sdx75-gcc"; + reg = <0x0 0x0080000 0x0 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart1: serial@984000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qupv3_se1_2uart_active>; + pinctrl-1 = <&qupv3_se1_2uart_sleep>; + pinctrl-names = "default", + "sleep"; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdx75-pdc", "qcom,pdc"; + reg = <0x0 0xb220000 0x0 0x30000>, + <0x0 0x174000f0 0x0 0x64>; + qcom,pdc-ranges = <0 147 52>, + <52 266 32>, + <84 500 59>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0 0x0f000000 0x0 0x400000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qupv3_se1_2uart_active: qupv3-se1-2uart-active-state { + tx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + drive-strength= <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + drive-strength= <2>; + bias-disable; + }; + }; + + qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17200000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0x0 0x17200000 0x0 0x10000>, + <0x0 0x17260000 0x0 0x80000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17420000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&CLUSTER_PD>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, + <SLEEP_TCS 2>, + <WAKE_TCS 2>, + <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sdx75-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d91000 0x0 0x1000>; + reg-names = "freq-domain0"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GPLL0>; + clock-names = "xo", + "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a1f0622db5a0..75951fd439df 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -242,6 +242,9 @@ &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts new file mode 100644 index 000000000000..3ce9875e932c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + */ + +/dts-v1/; + +#include "sm6115.dtsi" +#include "pm6125.dtsi" +#include <dt-bindings/arm/qcom,ids.h> + +/ { + model = "F(x)tec Pro1X (QX1050)"; + compatible = "fxtec,pro1x", "qcom,sm6115"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM6115 0x10000>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s6a: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + pm6125_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + pm6125_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + pm6125_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + pm6125_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + pm6125_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + pm6125_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + pm6125_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + pm6125_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + pm6125_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + pm6125_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l23a: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <14 4>; +}; + +&ufs_mem_hc { + vcc-supply = <&pm6125_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&pm6125_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vddp-ref-clk-supply = <&pm6125_l18a>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vdda-phy-dpdm-supply = <&pm6125_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 43f31c1b9d5a..55118577bf92 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -47,6 +47,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -64,6 +66,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -76,6 +80,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -88,6 +94,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; CPU4: cpu@100 { @@ -100,6 +108,8 @@ dynamic-power-coefficient = <282>; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -117,6 +127,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; }; CPU6: cpu@102 { @@ -129,6 +141,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; }; CPU7: cpu@103 { @@ -141,6 +155,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; }; cpu-map { @@ -180,6 +196,68 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <297>; + exit-latency-us = <324>; + min-residency-us = <1110>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_0_SLEEP_0: cluster-sleep-0-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000022>; + entry-latency-us = <360>; + exit-latency-us = <421>; + min-residency-us = <782>; + }; + + CLUSTER_0_SLEEP_1: cluster-sleep-0-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + + CLUSTER_1_SLEEP_0: cluster-sleep-1-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000042>; + entry-latency-us = <314>; + exit-latency-us = <345>; + min-residency-us = <660>; + }; + + CLUSTER_1_SLEEP_1: cluster-sleep-1-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <640>; + exit-latency-us = <1654>; + min-residency-us = <8094>; + }; + }; }; firmware { @@ -203,6 +281,64 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_0_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>; + }; + + CLUSTER_1_PD: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>; + }; }; reserved_memory: reserved-memory { @@ -663,6 +799,62 @@ status = "disabled"; }; + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + usb_qmpphy: phy@1615000 { + compatible = "qcom,sm6115-qmp-usb3-phy"; + reg = <0x0 0x01615000 0x0 0x1000>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "cfg_ahb", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>; @@ -700,7 +892,7 @@ #interrupt-cells = <4>; }; - tsens0: thermal-sensor@4410000 { + tsens0: thermal-sensor@4411000 { compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */ <0x0 0x04410000 0x0 0x8>; /* SROT */ @@ -1113,8 +1305,8 @@ compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_hsphy>; - phy-names = "usb2-phy"; + phys = <&usb_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index ea3340d31110..81fdcaf48926 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -306,6 +306,9 @@ &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index b1038eb8cebc..a7f4aeae9c1a 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -138,7 +138,7 @@ pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; - adc-chan@4d { + channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -146,7 +146,7 @@ label = "rf_pa0_therm"; }; - adc-chan@4e { + channel@4e { reg = <ADC5_AMUX_THM2_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -154,7 +154,7 @@ label = "quiet_therm"; }; - adc-chan@52 { + channel@52 { reg = <ADC5_GPIO1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -162,7 +162,7 @@ label = "camera_flash_therm"; }; - adc-chan@54 { + channel@54 { reg = <ADC5_GPIO3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 2aa093d16858..a596baa6ce3e 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -366,7 +366,7 @@ hwlocks = <&tcsr_mutex 3>; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00 0xffffffff>; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index ad34301f6cdd..30e77010aed5 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -56,6 +56,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -84,6 +86,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -107,6 +111,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -130,6 +136,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -153,6 +161,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -176,6 +186,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -199,6 +211,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -222,6 +236,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -266,6 +282,76 @@ }; }; }; + + domain-idle-states { + CLUSTER_SLEEP_PC: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + CLUSTER_SLEEP_CX_RET: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001244>; + entry-latency-us = <3638>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + CLUSTER_AOSS_SLEEP: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + + cpu_idle_states: idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; }; firmware { @@ -387,6 +473,25 @@ }; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; @@ -395,6 +500,61 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_PC + &CLUSTER_SLEEP_CX_RET + &CLUSTER_AOSS_SLEEP>; + }; }; reserved_memory: reserved-memory { @@ -750,6 +910,22 @@ status = "disabled"; }; + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM6350_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0 0x00888000 0 0x4000>; @@ -1735,6 +1911,34 @@ drive-strength = <2>; bias-pull-up; }; + + qup_uart1_cts: qup-uart1-cts-default-state { + pins = "gpio61"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_rts: qup-uart1-rts-default-state { + pins = "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart1_rx: qup-uart1-rx-default-state { + pins = "gpio64"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_tx: qup-uart1-tx-default-state { + pins = "gpio63"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; }; apps_smmu: iommu@15000000 { @@ -1900,28 +2104,6 @@ }; }; - wifi: wifi@18800000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0 0x18800000 0 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_fw_mem>; - interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x20 0x1>; - qcom,msa-fixed-perm; - status = "disabled"; - }; - apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; label = "apps_rsc"; @@ -1936,6 +2118,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm6350-rpmh-clk"; @@ -2019,6 +2202,28 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index f8d9c34d3b2f..3dba34210a6d 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,sm6375-gcc.h> +#include <dt-bindings/clock/qcom,sm6375-gpucc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -1276,6 +1277,42 @@ }; }; + adreno_smmu: iommu@5940000 { + compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x05940000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "bus"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,sm6375-gpucc"; + reg = <0 0x05990000 0 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + power-domains = <&rpmpd SM6375_VDDGX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + remoteproc_mss: remoteproc@6000000 { compatible = "qcom,sm6375-mpss-pas"; reg = <0 0x06000000 0 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 7ae6aba5d2ec..e3dc49951523 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -31,6 +31,7 @@ aliases { serial0 = &uart9; + serial1 = &uart1; }; chosen { @@ -524,6 +525,39 @@ }; }; +&qup_uart1_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart1_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart1_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart1_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; @@ -561,6 +595,75 @@ &tlmm { gpio-reserved-ranges = <13 4>, <56 2>; + + qup_uart1_sleep_cts: qup-uart1-sleep-cts-state { + pins = "gpio61"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart1_sleep_rts: qup-uart1-sleep-rts-state { + pins = "gpio62"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart1_sleep_rx: qup-uart1-sleep-rx-state { + pins = "gpio64"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart1_sleep_tx: qup-uart1-sleep-tx-state { + pins = "gpio63"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; +}; + +&uart1 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 64 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l11a>; + vddxo-supply = <&vreg_l7a>; + vddrf-supply = <&vreg_l2e>; + vddch0-supply = <&vreg_l10e>; + swctrl-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + + max-speed = <3200000>; + }; }; &uart9 { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 47e2430991ca..baafea53770b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8150.dtsi" #include "pm8150.dtsi" @@ -81,6 +82,66 @@ }; }; + cam0_vdig_vreg: cam0-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera0_vdig_vreg"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam1_vdig_vreg: cam1-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera1_vdig_vreg"; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&sub_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam2_vdig_vreg: cam2-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera2_vdig_vreg"; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam3_vdig_vreg: cam3-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera3_vdig_vreg"; + gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&supwc_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vmdr_vreg: cam-vmdr-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera_vmdr_vreg"; + gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_vmdr_en>; + pinctrl-names = "default"; + }; + + rgbcir_vreg: rgbcir-regulator { + compatible = "regulator-fixed"; + regulator-name = "rgbcir_vreg"; + gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rgbc_ir_pwr_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -456,6 +517,17 @@ }; &pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "", + "NC", + "NC", + "", + "NC", + "SUPWC_PWR_EN", + "", + "NC", + "NC"; /* GPIO_10 */ + vol_down_n: vol-down-n-state { pins = "gpio1"; function = "normal"; @@ -463,9 +535,31 @@ bias-pull-up; input-enable; }; + + supwc_pwr_en: supwc-pwr-en-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <1>; + power-source = <1>; + drive-push-pull; + output-low; + }; }; &pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "TS_VDDH_EN", + "LCD_ID", + "", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; + snapshot_n: snapshot-n-state { pins = "gpio1"; function = "normal"; @@ -483,6 +577,30 @@ }; }; +&pm8150l_gpios { + gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ + "NC", + "MAIN_CAM_PWR_VMDR_EN", + "NC", + "", + "NC", + "NC", + "FP_LDO_EN", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; + + main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { + pins = "gpio3"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -500,8 +618,225 @@ status = "okay"; }; +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <126 4>; + gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", + "NFC_ESE_SPI_CS_N", + "NC", + "NC", + "DISP_RESET_N", + "DEBUG_GPIO0", + "MDP_VSYNC_P", + "TS_I2C_SDA", + "TS_I2C_SCL", /* GPIO_10 */ + "CAM_SOF", + "CAM2_RST_N", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "NC", + "MAIN_CAM_PWR_EN", + "CAM3_RST_N", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "NC", + "CAM0_RST_N", + "RGBC_IR_PWR_EN", + "CAM1_RST_N", /* GPIO_30 */ + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "NC", + "DEBUG_GPIO1", + "RGBC_IR_INT", + "USB_CC_DIR", + "NC", + "NC", /* GPIO_40 */ + "NFC_EN", + "NFC_ESE_PWR_REQ", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "NFC_IRQ", + "NFC_DWL_REQ", + "UIM2_DETECT_EN", + "WLAN_SW_CTRL", /* GPIO_50 */ + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "TS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "HW_ID_0", + "NC", /* GPIO_60 */ + "QLINK_REQUEST", + "QLINK_ENABLE", + "WMSS_RESET_N", + "SDM_GRFC_8", + "WDOG_DISABLE", + "NC", + "NC", + "PA_INDICATOR_OR", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", /* GPIO_70 */ + "SDM_RFFE0_DATA", + "SDM_RFFE0_CLK", + "SDM_RFFE1_DATA", + "SDM_RFFE1_CLK", + "SDM_RFFE2_DATA", + "SDM_RFFE2_CLK", + "SDM_RFFE3_DATA", + "SDM_RFFE3_CLK", + "SUB_CAM_PWR_EN", + "FP_RESET_N", /* GPIO_80 */ + "NC", + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DVDT_WRT_DET_AND", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "UDON_SWITCH_SEL", + "SD_CARD_DET_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "USB_AUDIO_EN1", /* GPIO_100 */ + "DISP_ERR_FG", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_DET", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NFC_CLK_REQ", + "SW_SERVICE", + "NC", + "RF_ID_EXTENSION", + "ALS_PROX_INT_N", + "FP_INT", + "DVDT_WRT_DET_OR", + "BAROMETER_INT", /* GPIO_120 */ + "ACC_COVER_OPEN", + "TS_INT_N", + "CODEC_INT1_N", + "CODEC_INT2_N", + "TX_GTR_THRES_IN", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "NC", /* GPIO_130 */ + "DVDT_ENABLE", + "ACCEL_INT", + "NC", + "MAG_INT_N", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "HW_ID_1", + "NC", /* GPIO_140 */ + "NC", + "NC", + "CODEC_RST_N", + "CDC_SPI_MISO", + "CDC_SPI_MOSI", + "CDC_SPI_SCLK", + "CDC_SPI_CS_N", + "NC", + "LPASS_SLIMBUS_CLK", + "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ + "LPASS_SLIMBUS_DATA1", + "USB_AUDIO_EN2", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "COMPASS_I2C_SDA", + "COMPASS_I2C_SCL", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", /* GPIO_160 */ + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "SSC_UART_1_TX", + "SSC_UART_1_RX", + "WL_CMD_CLK_CHAIN0", + "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ + "WL_CMD_CLK_CHAIN1", + "WL_CMD_DATA_CHAIN1", + "WL_BT_COEX_CLK", + "WL_BT_COEX_DATA"; + + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sub_cam_pwr_en: sub-cam-pwr-en-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart2 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 27dcda0d4288..18c822abdb88 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -55,8 +55,8 @@ next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -84,8 +84,8 @@ next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -108,8 +108,8 @@ next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -132,8 +132,8 @@ next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -156,8 +156,8 @@ next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -180,8 +180,8 @@ next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -204,8 +204,8 @@ next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -228,8 +228,8 @@ next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -1362,14 +1362,11 @@ uart9: serial@a84000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a84000 0x0 0x4000>; - reg-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart9_default>; pinctrl-names = "default"; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1763,49 +1760,49 @@ config_noc: interconnect@1500000 { compatible = "qcom,sm8150-config-noc"; reg = <0 0x01500000 0 0x7400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8150-system-noc"; reg = <0 0x01620000 0 0x19400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163a000 { compatible = "qcom,sm8150-mc-virt"; reg = <0 0x0163a000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8150-aggre1-noc"; reg = <0 0x016e0000 0 0xd080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8150-aggre2-noc"; reg = <0 0x01700000 0 0x20000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1720000 { compatible = "qcom,sm8150-compute-noc"; reg = <0 0x01720000 0 0x7000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8150-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -1826,7 +1823,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8150"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -1921,7 +1918,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8150"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -2097,6 +2094,36 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -3520,14 +3547,14 @@ dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9680000 { compatible = "qcom,sm8150-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3568,6 +3595,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3617,6 +3648,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; @@ -3632,7 +3667,7 @@ camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3641,8 +3676,8 @@ reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -3986,7 +4021,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -4307,7 +4342,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18323000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 2f22d348d45d..8ab82bacba81 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -26,9 +26,10 @@ framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; - width = <1644>; - height = <3840>; - stride = <(1644 * 4)>; + /* pdx203 BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's a lot of clocks, but it's necessary due @@ -672,3 +673,8 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p9>; }; + +&venus { + firmware-name = "qcom/sm8250/Sony/edo/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 8af6a0120a50..b841ea9192ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -470,76 +470,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vreg_l9a_1p2>; - qcom,dual-dsi-mode; - qcom,sync-dual-dsi; - qcom,master-dsi; - status = "okay"; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p88>; - reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; - backlight = <&backlight>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1{ - reg = <1>; - - panel_in_1: endpoint { - remote-endpoint = <&dsi1_out>; - }; - }; - - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2>; - remote-endpoint = <&panel_in_0>; -}; - -&dsi0_phy { - vdds-supply = <&vreg_l5a_0p88>; - phy-type = <PHY_TYPE_CPHY>; - status = "okay"; -}; - -&dsi1 { - vdda-supply = <&vreg_l9a_1p2>; - qcom,dual-dsi-mode; - qcom,sync-dual-dsi; - /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; - status = "okay"; -}; - -&dsi1_out { - data-lanes = <0 1 2>; - remote-endpoint = <&panel_in_1>; -}; - -&dsi1_phy { - vdds-supply = <&vreg_l5a_0p88>; - phy-type = <PHY_TYPE_CPHY>; - status = "okay"; -}; - &gmu { status = "okay"; }; @@ -608,6 +538,75 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + status = "okay"; +}; + +&mdss_dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 7bea916900e2..83ab6de459bc 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -106,8 +106,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -137,8 +137,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -162,8 +162,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -187,8 +187,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -212,8 +212,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -237,8 +237,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -262,8 +262,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -287,8 +287,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -1789,49 +1789,49 @@ config_noc: interconnect@1500000 { compatible = "qcom,sm8250-config-noc"; reg = <0 0x01500000 0 0xa580>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8250-system-noc"; reg = <0 0x01620000 0 0x1c200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163d000 { compatible = "qcom,sm8250-mc-virt"; reg = <0 0x0163d000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8250-aggre1-noc"; reg = <0 0x016e0000 0 0x1f180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8250-aggre2-noc"; reg = <0 0x01700000 0 0x33000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1733000 { compatible = "qcom,sm8250-compute-noc"; reg = <0 0x01733000 0 0xa180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8250-mmss-noc"; reg = <0 0x01740000 0 0x1f080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2232,6 +2232,38 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x592 0x0000>, + <&apps_smmu 0x598 0x0000>, + <&apps_smmu 0x599 0x0000>, + <&apps_smmu 0x59f 0x0000>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x592 0x0000>, + <&apps_smmu 0x598 0x0000>, + <&apps_smmu 0x599 0x0000>, + <&apps_smmu 0x59f 0x0000>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x596 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -3661,21 +3693,21 @@ dc_noc: interconnect@90c0000 { compatible = "qcom,sm8250-dc-noc"; reg = <0 0x090c0000 0 0x4200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9100000 { compatible = "qcom,sm8250-gem-noc"; reg = <0 0x09100000 0 0xb4000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sm8250-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3718,6 +3750,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3778,6 +3814,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; @@ -3805,8 +3845,8 @@ <&videocc VIDEO_CC_MVS0_CLK>; clock-names = "iface", "core", "vcodec0_core"; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, - <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cpu-cfg", "video-mem"; iommus = <&apps_smmu 0x2100 0x0400>; @@ -4090,10 +4130,10 @@ <&apps_smmu 0xc40 0x400>, <&apps_smmu 0xc41 0x400>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, - <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cam_ahb", "cam_hf_0_mnoc", "cam_sf_0_mnoc", @@ -4150,8 +4190,8 @@ reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -4202,14 +4242,14 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; @@ -4239,7 +4279,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4262,12 +4302,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -4280,14 +4320,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -4312,7 +4352,7 @@ }; }; - dsi0_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4331,7 +4371,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; @@ -4354,12 +4394,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -4372,20 +4412,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@ae96400 { + mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4411,10 +4451,10 @@ power-domains = <&rpmhpd SM8250_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -5254,7 +5294,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -5639,7 +5679,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18591000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 2ee1b121686a..61dd9663fabe 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -58,7 +58,15 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; }; }; }; @@ -326,6 +334,37 @@ }; }; +&i2c13 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + &i2c15 { clock-frequency = <400000>; status = "okay"; @@ -370,8 +409,19 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dp { status = "okay"; + + ports { + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; }; &mpss { @@ -416,6 +466,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &qupv3_id_2 { status = "okay"; }; @@ -716,7 +770,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -732,6 +786,20 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p88>; + + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &usb_2 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 3efdc03ed0f1..88ef478cb5cc 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -907,7 +907,7 @@ }; }; - gpi_dma0: dma-controller@900000 { + gpi_dma0: dma-controller@9800000 { compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x09800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, @@ -1638,7 +1638,7 @@ status = "disabled"; }; - pcie1_phy: phy@1c0f000 { + pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy"; reg = <0 0x01c0e000 0 0x2000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, @@ -1735,6 +1735,28 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8350-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sm8350-ipa"; @@ -2140,7 +2162,7 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8350-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -2158,6 +2180,32 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2_qmpphy: phy-wrapper@88eb000 { @@ -2256,6 +2304,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -2325,6 +2377,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index e931545a2cac..bc4c125d1832 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -114,9 +114,18 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; }; }; @@ -494,6 +503,37 @@ }; }; +&i2c5 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + &mdss { status = "okay"; }; @@ -513,8 +553,19 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dp0 { status = "okay"; + + ports { + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; }; &pcie0 { @@ -766,7 +817,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -782,6 +833,20 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; + + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &vamacro { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d59ea8ee7111..5cd7296c7660 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/clock/qcom,sm8450-dispcc.h> +#include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -2053,6 +2054,32 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; remoteproc_slpi: remoteproc@2400000 { @@ -2581,6 +2608,18 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8450-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac15000 { compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; reg = <0 0x0ac15000 0 0x1000>; @@ -4002,31 +4041,43 @@ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp5 { + rpmhpd_opp_low_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp6 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp6 { + rpmhpd_opp_svs_l0: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp8 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp7 { + rpmhpd_opp_svs_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp10 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp8 { + rpmhpd_opp_nom_l1: opp11 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp9 { + rpmhpd_opp_nom_l2: opp12 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp10 { + rpmhpd_opp_turbo: opp13 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp11 { + rpmhpd_opp_turbo_l1: opp14 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; @@ -4147,6 +4198,34 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + }; + + crypto: crypto@1de0000 { + compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + sdhc_2: mmc@8804000 { compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -4227,6 +4306,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index e2b9bb6b1e27..ec86c5f38045 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -23,6 +23,32 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -61,6 +87,87 @@ }; }; + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -393,8 +500,22 @@ }; }; -&dispcc { - status = "okay"; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &mdss { @@ -437,10 +558,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; @@ -535,6 +652,58 @@ clock-frequency = <32000>; }; +&swr0 { + status = "okay"; + + /* WSA8845 */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + + /* WSA8845 */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; @@ -565,6 +734,14 @@ drive-strength = <2>; bias-pull-down; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index d5a645ee2a61..ec4feee6837d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8550.dtsi" #include "pm8010.dtsi" @@ -23,10 +24,167 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -359,6 +517,176 @@ }; }; +&gcc { + clocks = <&bi_tcxo_div2>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <0>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + pinctrl-names = "default", "sleep"; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vreg_l12b_1p8>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + status = "disabled"; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -385,8 +713,96 @@ clock-frequency = <32000>; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active: sde-te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_suspend: sde-te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { @@ -417,13 +833,24 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 558cbc430708..41d60af93692 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -4,7 +4,9 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> +#include <dt-bindings/clock/qcom,sm8550-gpucc.h> #include <dt-bindings/clock/qcom,sm8550-tcsr.h> #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -1848,7 +1850,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x28000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -1858,7 +1860,7 @@ <&apps_smmu 0x481 0x0>; }; - crypto: crypto@1de0000 { + crypto: crypto@1dfa000 { compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce"; reg = <0x0 0x01dfa000 0x0 0x6000>; dmas = <&cryptobam 4>, <&cryptobam 5>; @@ -1960,6 +1962,17 @@ #reset-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8550-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8550-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -2394,6 +2407,18 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8550-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -2470,6 +2495,13 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2497,6 +2529,84 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8550-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8550_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dp0_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -2680,8 +2790,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */ @@ -2693,7 +2803,6 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - status = "disabled"; }; usb_1_hsphy: phy@88e3000 { @@ -2769,6 +2878,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + status = "disabled"; usb_1_dwc3: usb@a600000 { @@ -2883,7 +2996,7 @@ #interrupt-cells = <4>; }; - tlmm: pinctrl@f000000 { + tlmm: pinctrl@f100000 { compatible = "qcom,sm8550-tlmm"; reg = <0 0x0f100000 0 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -3597,6 +3710,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, <WAKE_TCS 2>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3617,43 +3731,63 @@ rpmhpd_opp_table: opp-table { compatible = "operating-points-v2"; - rpmhpd_opp_ret: opp1 { + rpmhpd_opp_ret: opp-16 { opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; }; - rpmhpd_opp_min_svs: opp2 { + rpmhpd_opp_min_svs: opp-48 { opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; - rpmhpd_opp_low_svs: opp3 { + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp4 { + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp5 { + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp6 { + rpmhpd_opp_nom: opp-256 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp7 { + rpmhpd_opp_nom_l1: opp-320 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp8 { + rpmhpd_opp_nom_l2: opp-336 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp9 { + rpmhpd_opp_turbo: opp-384 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp10 { + rpmhpd_opp_turbo_l1: opp-416 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi index 2d92b56ac94d..d0c9387ac17a 100644 --- a/arch/arm64/boot/dts/realtek/rtd1293.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi @@ -30,6 +30,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index 1402abe80ea1..b7f63102f2dd 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -44,6 +44,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi index fb864a139c97..4f805f576cef 100644 --- a/arch/arm64/boot/dts/realtek/rtd1296.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi @@ -44,6 +44,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1395.dtsi b/arch/arm64/boot/dts/realtek/rtd1395.dtsi index 05c9216a87ee..2efe5b25c83c 100644 --- a/arch/arm64/boot/dts/realtek/rtd1395.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1395.dtsi @@ -44,6 +44,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi index bf4d9e917925..34802cc62983 100644 --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi @@ -88,11 +88,15 @@ l2: l2-cache { compatible = "cache"; next-level-cache = <&l3>; + cache-level = <2>; + cache-unified; }; l3: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index f130165577a8..7114cbbd8713 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -79,10 +79,12 @@ dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index c21b78685123..9065dc243428 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -2359,8 +2359,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2371,6 +2371,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2386,8 +2388,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2398,6 +2400,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 82216ce7a92a..75776decd218 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2238,8 +2238,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2250,6 +2250,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2265,8 +2267,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2277,6 +2279,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 10abfde329d0..ad2e87b039ac 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1704,8 +1704,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -1716,6 +1716,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 2828e05b40b3..2acf4067ab2f 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -2471,8 +2471,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2483,6 +2483,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2498,8 +2500,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2510,6 +2512,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 10b91e9733bf..6d15229d25ab 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -2778,8 +2778,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2790,6 +2790,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2805,8 +2807,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2817,6 +2819,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 3ea8572e917f..17062ec506be 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -2565,8 +2565,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2577,6 +2577,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2592,8 +2594,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2604,6 +2606,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index d52cb0b67d80..d3f47da1b626 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -2445,8 +2445,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2457,6 +2457,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2472,8 +2474,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2484,6 +2486,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9584115c6b17..c75820038491 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2423,8 +2423,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2435,6 +2435,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2450,8 +2452,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2462,6 +2464,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index c4ac28a0f716..5ed2daaca1f0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1386,7 +1386,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -1399,6 +1400,8 @@ resets = <&cpg 319>; phys = <&pcie_phy>; phy-names = "pcie"; + iommu-map = <0 &ipmmu_vi0 5 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4529e9b57c33..1be0b99c15ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1870,8 +1870,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -1882,6 +1882,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index bf587a14ec19..4e67a0356497 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -943,6 +943,56 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779a0", "renesas,rcar-gen4-scif", "renesas,scif"; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 1315be5167b9..232910e07444 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -174,6 +174,76 @@ #size-cells = <2>; ranges; + mtu3: timer@10001200 { + compatible = "renesas,r9a07g044-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x10001200 0 0xb00>; + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tgiv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; + #pwm-cells = <2>; + status = "disabled"; + }; + ssi0: ssi@10049c00 { compatible = "renesas,r9a07g044-ssi", "renesas,rz-ssi"; @@ -697,6 +767,59 @@ }; }; + dsi: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", + "renesas,rzg2l-mipi-dsi"; + reg = <0 0x10850000 0 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + status = "disabled"; + }; + + vspd: vsp@10870000 { + compatible = "renesas,r9a07g044-vsp2"; + reg = <0 0x10870000 0 0x10000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + renesas,fcp = <&fcpvd>; + }; + + fcpvd: fcp@10880000 { + compatible = "renesas,r9a07g044-fcpvd", + "renesas,fcpv"; + reg = <0 0x10880000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso new file mode 100644 index 000000000000..f983bdd3ea30 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G2LC SMARC EVK with + * OV5645 camera connected to CSI and CRU enabled. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso index d834bff9bda2..736c1e688cc8 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree overlay for the RZ/G2L SMARC EVK with OV5645 camera + * Device Tree overlay for the RZ/{G2L, V2L} SMARC EVK with OV5645 camera * connected to CSI and CRU enabled. * * Copyright (C) 2023 Renesas Electronics Corp. diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index cc11e5855d62..2eba3a8a100d 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -174,6 +174,76 @@ #size-cells = <2>; ranges; + mtu3: timer@10001200 { + compatible = "renesas,r9a07g054-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x10001200 0 0xb00>; + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tgiv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G054_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_MTU_X_PRESET_MTU3>; + #pwm-cells = <2>; + status = "disabled"; + }; + ssi0: ssi@10049c00 { compatible = "renesas,r9a07g054-ssi", "renesas,rz-ssi"; @@ -623,6 +693,139 @@ status = "disabled"; }; + cru: video@10830000 { + compatible = "renesas,r9a07g054-cru", "renesas,rzg2l-cru"; + reg = <0 0x10830000 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G054_CRU_VCLK>, + <&cpg CPG_MOD R9A07G054_CRU_PCLK>, + <&cpg CPG_MOD R9A07G054_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + resets = <&cpg R9A07G054_CRU_PRESETN>, + <&cpg R9A07G054_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + cruparallel: endpoint@0 { + reg = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@10830400 { + compatible = "renesas,r9a07g054-csi2", "renesas,rzg2l-csi2"; + reg = <0 0x10830400 0 0xfc00>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G054_CRU_VCLK>, + <&cpg CPG_MOD R9A07G054_CRU_PCLK>; + clock-names = "system", "video", "apb"; + resets = <&cpg R9A07G054_CRU_PRESETN>, + <&cpg R9A07G054_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + + dsi: dsi@10850000 { + compatible = "renesas,r9a07g054-mipi-dsi", + "renesas,rzg2l-mipi-dsi"; + reg = <0 0x10850000 0 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G054_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G054_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G054_MIPI_DSI_ARESET_N>, + <&cpg R9A07G054_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + status = "disabled"; + }; + + vspd: vsp@10870000 { + compatible = "renesas,r9a07g054-vsp2", + "renesas,r9a07g044-vsp2"; + reg = <0 0x10870000 0 0x10000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_LCDC_RESET_N>; + renesas,fcp = <&fcpvd>; + }; + + fcpvd: fcp@10880000 { + compatible = "renesas,r9a07g054-fcpvd", + "renesas,fcpv"; + reg = <0 0x10880000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_LCDC_RESET_N>; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g054-cpg"; reg = <0 0x11010000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso new file mode 120000 index 000000000000..0f175341d3ed --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso @@ -0,0 +1 @@ +r9a07g044l2-smarc-cru-csi-ov5645.dtso
\ No newline at end of file diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index e180a955b6ac..2a158a954b2f 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -16,12 +16,91 @@ serial1 = &scif2; i2c3 = &i2c3; }; + + osc1: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; }; &cpu_dai { sound-dai = <&ssi0>; }; +&dsi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + +&i2c1 { + adv7535: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>; + clocks = <&osc1>; + clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + a2vdd-supply = <®_1p8v>; + v3p3-supply = <®_3p3v>; + v1p2-supply = <®_1p8v>; + + adi,dsi-lanes = <4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index b6bd27196d88..6818fd49b2be 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -17,6 +17,23 @@ serial1 = &scif1; i2c2 = &i2c2; }; + + osc1: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; }; #if (SW_SCIF_CAN || SW_RSPI_CAN) @@ -36,6 +53,68 @@ sound-dai = <&ssi0>; }; +&dsi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + +&i2c1 { + adv7535: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_FALLING>; + clocks = <&osc1>; + clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + a2vdd-supply = <®_1p8v>; + v3p3-supply = <®_3p3v>; + v1p2-supply = <®_1p8v>; + + adi,dsi-lanes = <4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index efc80960380f..3885ef3454ff 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -10,6 +10,7 @@ aliases { serial1 = &hscif0; serial2 = &scif1; + serial3 = &hscif1; mmc2 = &sdhi3; }; @@ -114,6 +115,14 @@ status = "okay"; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; @@ -366,8 +375,13 @@ function = "hscif0"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + scif1_pins: scif1 { - groups = "scif1_data_b", "scif1_ctrl"; + groups = "scif1_data_b"; function = "scif1"; }; @@ -397,7 +411,6 @@ &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 2d585bbb8f3a..b7fb908eb92d 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb @@ -69,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb @@ -85,6 +87,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb @@ -92,7 +96,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index dd228a256a32..2ae4bb7d5e62 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -97,6 +97,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts new file mode 100644 index 000000000000..16a1958e4572 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3328-nanopi-r2c.dts" + +/ { + model = "FriendlyElec NanoPi R2C Plus"; + compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328"; + + aliases { + mmc1 = &emmc; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <150000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io_33>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index f69a38f42d2d..0a27fa5271f5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -37,7 +37,8 @@ vin-supply = <&vcc_io>; }; - vcc_host_5v: vcc-host-5v-regulator { + /* Common enable line for all of the rails mentioned in the labels */ + vcc_host_5v: vcc_host1_5v: vcc_otg_5v: vcc-host-5v-regulator { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -48,17 +49,6 @@ vin-supply = <&vcc_sys>; }; - vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&usb20_host_drv>; - regulator-name = "vcc_host1_5v"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 6d7a7bf72ac7..e729e7a22b23 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -103,6 +103,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts index 369de5dc0ebd..c58fb7658d7a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts @@ -8,7 +8,7 @@ /dts-v1/; #include "rk3399.dtsi" #include "rk3399-opp.dtsi" -#include <arm/rockchip-radxa-dalang-carrier.dtsi> +#include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi> #include "rk3399pro-vmarc-som.dtsi" / { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts new file mode 100644 index 000000000000..b211973e36c2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg353x.dtsi" + +/ { + model = "RG353PS"; + compatible = "anbernic,rg353ps", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdmmc2; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3472000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; +}; + +&gpio_keys_control { + button-r1 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; +}; + +&panel { + compatible = "anbernic,rg353v-panel-v2"; + iovcc-supply = <&vcc3v3_lcd0_n>; + vcc-supply = <&vcc3v3_lcd0_n>; + /delete-property/ vdd-supply; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi index 8fadd8afb190..a2c31d53b45b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -191,30 +191,30 @@ }; }; - leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; + leds: pwm-leds { + compatible = "pwm-leds"; green_led: led-0 { color = <LED_COLOR_ID_GREEN>; default-state = "on"; function = LED_FUNCTION_POWER; - gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + max-brightness = <255>; + pwms = <&pwm6 0 25000 0>; }; amber_led: led-1 { color = <LED_COLOR_ID_AMBER>; function = LED_FUNCTION_CHARGING; - gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; - retain-state-suspended; + max-brightness = <255>; + pwms = <&pwm7 0 25000 0>; }; red_led: led-2 { color = <LED_COLOR_ID_RED>; default-state = "off"; function = LED_FUNCTION_STATUS; - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + max-brightness = <255>; + pwms = <&pwm0 0 25000 0>; }; }; @@ -597,15 +597,6 @@ }; }; - gpio-led { - led_pins: led-pins { - rockchip,pins = - <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>, - <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>, - <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - joy-mux { joy_mux_en: joy-mux-en { rockchip,pins = @@ -654,10 +645,24 @@ vccio7-supply = <&vcc_3v3>; }; +&pwm0 { + pinctrl-0 = <&pwm0m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm5 { status = "okay"; }; +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_1v8>; status = "okay"; @@ -716,7 +721,7 @@ status = "okay"; bluetooth { - compatible = "realtek,rtl8821cs-bt", "realtek,rtl8822cs-bt"; + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts index 263ce40770dd..cddf6cd2fecb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -28,6 +28,16 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin>; }; + + vcc_sd_pwr: vcc-sd-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd_pwr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; }; /* phy for pcie */ @@ -130,13 +140,7 @@ }; &sdmmc0 { - vmmc-supply = <&sdmmc_pwr>; - status = "okay"; -}; - -&sdmmc_pwr { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vmmc-supply = <&vcc_sd_pwr>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index 102e448bc026..31aa2b8efe39 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -104,16 +104,6 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; - - sdmmc_pwr: sdmmc-pwr-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr_h>; - regulator-name = "sdmmc_pwr"; - status = "disabled"; - }; }; &cpu0 { @@ -155,6 +145,19 @@ status = "disabled"; }; +&gpio0 { + nextrst-hog { + gpio-hog; + /* + * GPIO_ACTIVE_LOW + output-low here means that the pin is set + * to high, because output-low decides the value pre-inversion. + */ + gpios = <RK_PA5 GPIO_ACTIVE_LOW>; + line-name = "nEXTRST"; + output-low; + }; +}; + &gpu { mali-supply = <&vdd_gpu>; status = "okay"; @@ -538,12 +541,6 @@ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - sdmmc-pwr { - sdmmc_pwr_h: sdmmc-pwr-h { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; &pmu_io_domains { diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts new file mode 100644 index 000000000000..58ab7e9971db --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rk3568-fastrhino-r66s.dtsi" + +/ { + model = "Lunzn FastRhino R66S"; + compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568"; + + aliases { + mmc0 = &sdmmc0; + }; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi new file mode 100644 index 000000000000..25e205632a68 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&reset_button_pin>; + + button-reset { + debounce-interval = <50>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&status_led_pin>; + + status_led: led-status { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-init-microvolt = <950000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + status_led_pin: status-led-pin { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts new file mode 100644 index 000000000000..e1fe5e442689 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rk3568-fastrhino-r66s.dtsi" + +/ { + model = "Lunzn FastRhino R68S"; + compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1750>; + }; + }; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 15ms, 50ms for rtl8211f */ + snps,reset-delays-us = <0 15000 50000>; + tx_delay = <0x3c>; + rx_delay = <0x2f>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 15ms, 50ms for rtl8211f */ + snps,reset-delays-us = <0 15000 50000>; + tx_delay = <0x4f>; + rx_delay = <0x26>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-0 = <ð_phy1_reset_pin>; + pinctrl-names = "default"; + }; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gmac1 { + eth_phy1_reset_pin: eth-phy1-reset-pin { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts index f70ca9f0470a..c718b8dbb9c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts @@ -106,7 +106,7 @@ rockchip-key { reset_button_pin: reset-button-pin { - rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts index 2a1118f15c29..b6ad8328c7eb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts @@ -134,4 +134,3 @@ }; }; }; - diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index ba67b58f05b7..f1be76a54ceb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -94,9 +94,10 @@ power-domains = <&power RK3568_PD_PIPE>; reg = <0x3 0xc0400000 0x0 0x00400000>, <0x0 0xfe270000 0x0 0x00010000>, - <0x3 0x7f000000 0x0 0x01000000>; - ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>, - <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>; + <0x0 0xf2000000 0x0 0x00100000>; + ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, + <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>, + <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>; reg-names = "dbi", "apb", "config"; resets = <&cru SRST_PCIE30X1_POWERUP>; reset-names = "pipe"; @@ -146,9 +147,10 @@ power-domains = <&power RK3568_PD_PIPE>; reg = <0x3 0xc0800000 0x0 0x00400000>, <0x0 0xfe280000 0x0 0x00010000>, - <0x3 0xbf000000 0x0 0x01000000>; - ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>, - <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>; + <0x0 0xf0000000 0x0 0x00100000>; + ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, + <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>, + <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>; reg-names = "dbi", "apb", "config"; resets = <&cru SRST_PCIE30X2_POWERUP>; reset-names = "pipe"; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index f62e0fd881a9..abee88911982 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -613,6 +613,17 @@ #iommu-cells = <0>; }; + rga: rga@fdeb0000 { + compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga"; + reg = <0x0 0xfdeb0000 0x0 0x180>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3568_PD_RGA>; + }; + vepu: video-codec@fdee0000 { compatible = "rockchip,rk3568-vepu"; reg = <0x0 0xfdee0000 0x0 0x800>; @@ -952,7 +963,7 @@ compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0000000 0x0 0x00400000>, <0x0 0xfe260000 0x0 0x00010000>, - <0x3 0x3f000000 0x0 0x01000000>; + <0x0 0xf4000000 0x0 0x00100000>; reg-names = "dbi", "apb", "config"; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, @@ -982,8 +993,9 @@ phys = <&combphy2 PHY_TYPE_PCIE>; phy-names = "pcie-phy"; power-domains = <&power RK3568_PD_PIPE>; - ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000 - 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>; + ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, + <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>, + <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>; resets = <&cru SRST_PCIE20_POWERUP>; reset-names = "pipe"; #address-cells = <3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts new file mode 100644 index 000000000000..e9d5a8bab581 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. + */ + +/dts-v1/; +#include "rk3588j.dtsi" +#include "rk3588-edgeble-neu6b.dtsi" + +/ { + model = "Edgeble Neu6B IO Board"; + compatible = "edgeble,neural-compute-module-6b-io", + "edgeble,neural-compute-module-6b", "rockchip,rk3588"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi new file mode 100644 index 000000000000..1c5bcf1280b4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. + */ + +/ { + compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index b91af0204dbe..4b2d857ee219 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -49,6 +49,38 @@ }; }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + &gmac0 { clock_in_out = "output"; phy-handle = <&rgmii_phy>; @@ -123,6 +155,611 @@ status = "okay"; }; +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <2>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_codec_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_codec_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s3: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_1v8_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_0v75_hdmi_edp_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_hdmi_edp_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + pmic@1 { + compatible = "rockchip,rk806"; + reg = <0x01>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, + <&rk806_slave_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_slave_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_slave_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_slave_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_cpu_big1_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big0_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + + vdd_cpu_big0_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_cam_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd1v8_ddr_pll_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd1v8_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_1v8_pll_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_1v8_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v8_cam_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_2v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_pll_s0: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v85_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_cam_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 3e4aee8f70c1..afda976680bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -51,6 +51,16 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; }; &cpu_b0 { @@ -69,6 +79,22 @@ cpu-supply = <&vdd_cpu_big1_s0>; }; +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -133,6 +159,8 @@ reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; clock-names = "mclk"; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; #sound-dai-cells = <0>; port { @@ -179,6 +207,11 @@ status = "okay"; }; +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + &sdhci { bus-width = <8>; no-sdio; @@ -190,6 +223,344 @@ status = "okay"; }; +&sdmmc { + max-frequency = <200000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-init-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi new file mode 100644 index 000000000000..38b9dbf38a21 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Rockchip Electronics Co., Ltd. + * + */ + +#include "rk3588.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts new file mode 100644 index 000000000000..4d9ed2a02736 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -0,0 +1,763 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Indiedroid Nova"; + compatible = "indiedroid,nova", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clock-names = "ext_clock"; + clocks = <&rtc_hym8563>; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,es8388-codec"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + routing = "LINPUT2", "Mic Jack", + "Headphones", "LOUT1", + "Headphones", "ROUT1"; + dais = <&i2s0_8ch_p0>; + }; + + vbus5v0_typec: vbus5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&typec5v_pwren>; + pinctrl-names = "default"; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys>; + }; + + /* Regulator is enabled whenever vcc_1v8_s0 is above 1.6v */ + vcc_3v3_s0: vcc-3v3-s0-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_usb"; + vin-supply = <&vcc5v0_usbdcin>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_usbdcin"; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0{ + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1{ + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2{ + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3{ + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +/* + * Add labels for each GPIO pin exposed on the 40 pin header. Note that + * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by + * label). + */ +&gpio0 { + gpio-line-names = /* GPIO0 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO0 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO0 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO0 D0-D7 */ + "HEADER_12_1v8", "", "", "HEADER_24_1v8", + "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A0-A7 */ + "HEADER_27_3v3", "HEADER_28_3v3", "", "", + "HEADER_29_1v8", "", "HEADER_7_1v8", "", + /* GPIO1 B0-B7 */ + "", "HEADER_31_1v8", "HEADER_33_1v8", "", + "HEADER_11_1v8", "HEADER_13_1v8", "", "", + /* GPIO1 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO1 D0-D7 */ + "", "", "", "", + "", "", "HEADER_5_3v3", "HEADER_3_3v3"; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 B0-B7 */ + "HEADER_16_1v8", "HEADER_18_1v8", "", "", + "", "", "", "HEADER_19_1v8", + /* GPIO3 C0-C7 */ + "HEADER_21_1v8", "HEADER_23_1v8", "", "HEADER_26_1v8", + "HEADER_15_1v8", "HEADER_22_1v8", "", "", + /* GPIO3 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A0-A7 */ + "", "", "HEADER_37_3v3", "HEADER_32_3v3", + "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3", + /* GPIO4 B0-B7 */ + "", "", "", "HEADER_40_3v3", + "HEADER_8_3v3", "HEADER_10_3v3", "", "", + /* GPIO4 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO4 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&usbc0_int>; + pinctrl-names = "default"; + vbus-supply = <&vbus5v0_typec>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + op-sink-microwatt = <1000000>; + }; + }; + + rtc_hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&hym8563_int>; + pinctrl-names = "default"; + wakeup-source; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + assigned-clock-rates = <12288000>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s3>; + clock-names = "mclk"; + clocks = <&cru I2S0_8CH_MCLKOUT>; + DVDD-supply = <&vcc_1v8_s3>; + HPVDD-supply = <&vcc_3v3_s3>; + PVDD-supply = <&vcc_1v8_s3>; + #sound-dai-cells = <0>; + + port { + es8388_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8388_p0_0>; + }; + }; +}; + +&pinctrl { + bluetooth-pins { + bt_reset: bt-reset { + rockchip,pins = + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_dev: bt-wake-dev { + rockchip,pins = + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = + <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + hym8563 { + + hym8563_int: hym8563-int { + rockchip,pins = + <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = + <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + typec5v_pwren: typec5v-pwren { + rockchip,pins = + <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/* HS400 modes seemed to cause io errors. */ +&sdhci { + bus-width = <8>; + no-mmc-hs400; + no-sd; + no-sdio; + non-removable; + max-frequency = <200000000>; + vmmc-supply = <&vcc_3v3_s0>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <100000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + #address-cells = <1>; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <675000>; + regulator-name = "vdd_logic_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_vdenc_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <2000000>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <600000>; + regulator-min-microvolt = <600000>; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Schematics show not in use */ + nldo-reg5 { + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* DMA seems to interfere with bluetooth device normal operation. */ +&uart9 { + pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>; + pinctrl-names = "default"; + /delete-property/ dma-names; + /delete-property/ dmas; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt", + "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>; + pinctrl-names = "default"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 657c019d27fa..1576f9bfd6de 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -229,6 +229,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -238,6 +239,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -247,6 +249,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -256,6 +259,7 @@ cache-line-size = <64>; cache-sets = <512>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -265,6 +269,7 @@ cache-line-size = <64>; cache-sets = <1024>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -274,6 +279,7 @@ cache-line-size = <64>; cache-sets = <1024>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -283,6 +289,7 @@ cache-line-size = <64>; cache-sets = <1024>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -292,6 +299,7 @@ cache-line-size = <64>; cache-sets = <1024>; cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -301,6 +309,7 @@ cache-line-size = <64>; cache-sets = <4096>; cache-level = <3>; + cache-unified; }; }; @@ -1176,6 +1185,21 @@ status = "disabled"; }; + sdio: mmc@fe2d0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x00 0xfe2d0000 0x00 0x4000>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>; + power-domains = <&power RK3588_PD_SDIO>; + status = "disabled"; + }; + sdhci: mmc@fe2e0000 { compatible = "rockchip,rk3588-dwcmshc"; reg = <0x0 0xfe2e0000 0x0 0x10000>; @@ -1187,6 +1211,9 @@ <&cru TMCLK_EMMC>; clock-names = "core", "bus", "axi", "block", "timer"; max-frequency = <200000000>; + pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>, + <&emmc_cmd>, <&emmc_data_strobe>; + pinctrl-names = "default"; resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, <&cru SRST_T_EMMC>; @@ -1300,7 +1327,24 @@ mbi-alias = <0x0 0xfe610000>; mbi-ranges = <424 56>; msi-controller; + ranges; + #address-cells = <2>; #interrupt-cells = <4>; + #size-cells = <2>; + + its0: msi-controller@fe640000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe640000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + + its1: msi-controller@fe660000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe660000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; ppi-partitions { ppi_partition0: interrupt-partition-0 { @@ -1400,6 +1444,14 @@ status = "disabled"; }; + timer0: timer@feae0000 { + compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xfeae0000 0x0 0x20>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; + clock-names = "pclk", "timer"; + }; + wdt: watchdog@feaf0000 { compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; reg = <0x0 0xfeaf0000 0x0 0x100>; @@ -1759,6 +1811,18 @@ status = "disabled"; }; + saradc: adc@fec10000 { + compatible = "rockchip,rk3588-saradc"; + reg = <0x0 0xfec10000 0x0 0x10000>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + i2c6: i2c@fec80000 { compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xfec80000 0x0 0x1000>; @@ -1814,6 +1878,60 @@ status = "disabled"; }; + otp: efuse@fecc0000 { + compatible = "rockchip,rk3588-otp"; + reg = <0x0 0xfecc0000 0x0 0x400>; + clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, + <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; + clock-names = "otp", "apb_pclk", "phy", "arb"; + resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, + <&cru SRST_OTPC_ARB>; + reset-names = "otp", "apb", "arb"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_code: cpu-code@2 { + reg = <0x02 0x2>; + }; + + otp_id: id@7 { + reg = <0x07 0x10>; + }; + + cpub0_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + cpub1_leakage: cpu-leakage@18 { + reg = <0x18 0x1>; + }; + + cpul_leakage: cpu-leakage@19 { + reg = <0x19 0x1>; + }; + + log_leakage: log-leakage@1a { + reg = <0x1a 0x1>; + }; + + gpu_leakage: gpu-leakage@1b { + reg = <0x1b 0x1>; + }; + + otp_cpu_version: cpu-version@1c { + reg = <0x1c 0x1>; + bits = <3 3>; + }; + + npu_leakage: npu-leakage@28 { + reg = <0x28 0x1>; + }; + + codec_leakage: codec-leakage@29 { + reg = <0x29 0x1>; + }; + }; + dmac2: dma-controller@fed10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfed10000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi index 9caabbb8bae3..3e1132204c7d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi @@ -1 +1 @@ -#include <arm/uniphier-pinctrl.dtsi> +#include <arm/socionext/uniphier-pinctrl.dtsi> diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi index e66d999d9f5d..8afbe5ce45f2 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi @@ -1 +1 @@ -#include <arm/uniphier-ref-daughter.dtsi> +#include <arm/socionext/uniphier-ref-daughter.dtsi> diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi index 28c5b4ed1d95..6d0e3226a966 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi @@ -1 +1 @@ -#include <arm/uniphier-support-card.dtsi> +#include <arm/socionext/uniphier-support-card.dtsi> diff --git a/arch/arm64/boot/dts/st/Makefile b/arch/arm64/boot/dts/st/Makefile new file mode 100644 index 000000000000..881fe1296c58 --- /dev/null +++ b/arch/arm64/boot/dts/st/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +dtb-$(CONFIG_ARCH_STM32) += stm32mp257f-ev1.dtb diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi new file mode 100644 index 000000000000..d34a1d5e79c0 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; /* USART2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi new file mode 100644 index 000000000000..5268a4321841 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + clocks { + ck_flexgen_08: ck-flexgen-08 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + ck_flexgen_51: ck-flexgen-51 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + + ck_icn_ls_mcu: ck-icn-ls-mcu { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + + intc: interrupt-controller@4ac00000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x0 0x4ac10000 0x0 0x1000>, + <0x0 0x4ac20000 0x0 0x2000>, + <0x0 0x4ac40000 0x0 0x2000>, + <0x0 0x4ac60000 0x0 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + always-on; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges = <0x0 0x0 0x0 0x80000000>; + + rifsc: rifsc-bus@42080000 { + compatible = "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_08>; + status = "disabled"; + }; + }; + + syscfg: syscon@44230000 { + compatible = "st,stm32mp25-syscfg", "syscon"; + reg = <0x44230000 0x10000>; + }; + + pinctrl: pinctrl@44240000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-pinctrl"; + ranges = <0 0x44240000 0xa0400>; + pins-are-numbered; + + gpioa: gpio@44240000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@44250000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@44260000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@44270000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x30000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@44280000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@44290000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x50000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@442a0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x60000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@442b0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x70000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@442c0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x80000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@442d0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x90000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@442e0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa0000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pinctrl@46200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-z-pinctrl"; + ranges = <0 0x46200000 0x400>; + pins-are-numbered; + + gpioz: gpio@46200000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + + }; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi new file mode 100644 index 000000000000..af48e82efe8a --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include "stm32mp251.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + }; + + arm-pmu { + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi new file mode 100644 index 000000000000..e6fa596211f5 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include "stm32mp253.dtsi" + +/ { +}; diff --git a/arch/arm64/boot/dts/st/stm32mp257.dtsi b/arch/arm64/boot/dts/st/stm32mp257.dtsi new file mode 100644 index 000000000000..5c5000d3d9db --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp257.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include "stm32mp255.dtsi" + +/ { +}; diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts new file mode 100644 index 000000000000..39b4726cc098 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp257.dtsi" +#include "stm32mp25xf.dtsi" +#include "stm32mp25-pinctrl.dtsi" +#include "stm32mp25xxai-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP257F-EV1 Evaluation Board"; + compatible = "st,stm32mp257f-ev1", "st,stm32mp257"; + + aliases { + serial0 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + fw@80000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x80000000 0x0 0x4000000>; + no-map; + }; + }; +}; + +&usart2 { + pinctrl-names = "default", "idle", "sleep"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_idle_pins_a>; + pinctrl-2 = <&usart2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp25xc.dtsi b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi new file mode 100644 index 000000000000..5e83a6926485 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/ { +}; diff --git a/arch/arm64/boot/dts/st/stm32mp25xf.dtsi b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi new file mode 100644 index 000000000000..5e83a6926485 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/ { +}; diff --git a/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi new file mode 100644 index 000000000000..abdbc7aebc7f --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AI>; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@442d0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@442e0000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi new file mode 100644 index 000000000000..2e0d4d349d14 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AK>; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi new file mode 100644 index 000000000000..2406e972554c --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AL>; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index dc12350b9fc8..53d616c3cfed 100644 --- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -64,6 +64,8 @@ l2: cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; idle-states { diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c83c9d772b81..6dd7b6f1d6ab 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -10,7 +10,14 @@ # Boards with AM62x SoC dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb # Boards with AM62Ax SoC @@ -22,12 +29,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb # Boards with AM65x SoC +k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb # Boards with J7200 SoC k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index 4b94f7a86316..5e6feb8cd125 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -73,19 +73,19 @@ }; &main_pmx0 { - vddshv_sdio_pins_default: vddshv-sdio-pins-default { + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ >; }; - main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ >; }; - pmic_irq_pins_default: pmic-irq-pins-default { + pmic_irq_pins_default: pmic-irq-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index b3e4857bbbe4..2488e3a537fe 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -184,6 +184,21 @@ dma-names = "tx", "rx1", "rx2"; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; @@ -192,6 +207,12 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; + }; + main_timer0: timer@2400000 { compatible = "ti,am654-timer"; reg = <0x00 0x2400000 0x00 0x400>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index 076601a41e84..19fc38157d94 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -14,6 +14,12 @@ pinctrl-single,function-mask = <0xffffffff>; }; + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x4100000 0x00 0x1000>; + ti,esm-pins = <0>, <1>, <2>, <85>; + }; + /* * The MCU domain timer interrupts are routed only to the ESM module, * and not currently available for Linux. The MCU domain timers are diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi new file mode 100644 index 000000000000..aa43e7407eee --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phycore-am62x + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-AM62x"; + compatible = "phytec,am62-phycore-som", "ti,am625"; + + aliases { + ethernet0 = &cpsw_port1; + gpio0 = &main_gpio0; + gpio1 = &main_gpio1; + i2c0 = &main_i2c0; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + rtc1 = &wkup_rtc0; + spi0 = &ospi0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9ca00000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0x00c00000>; + no-map; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5v0_som>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; +}; + +&main_pmx0 { + leds_pins_default: leds-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x034, PIN_OUTPUT, 7) /* (H21) OSPI0_CSN2.GPIO0_13 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + main_mdio1_pins_default: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ + >; + }; + + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + status = "okay"; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_5v0_som>; + buck2-supply = <&vcc_5v0_som>; + buck3-supply = <&vcc_5v0_som>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&vdd_1v8>; + ldo3-supply = <&vcc_5v0_som>; + ldo4-supply = <&vcc_5v0_som>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + ti,power-button; + system-power-controller; + + regulators { + vdd_core: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_3v3: buck2 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_ddr4: buck3 { + regulator-name = "VDD_DDR4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + vddshv5_sdio: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + vddr_core: ldo2 { + regulator-name = "VDDR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + vdda_1v8: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_2v5: ldo4 { + regulator-name = "VDD_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x50>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi new file mode 100644 index 000000000000..a358757e26f0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi new file mode 100644 index 000000000000..3abd8d1d6761 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Dahlia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit + */ + +/* Verdin ETHs */ +&cpsw3g { + status = "okay"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + status = "okay"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>, + <&pinctrl_gpio_8>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + status = "okay"; +}; + +/* Verdin I2S_1 */ +&mcasp0 { + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&ospi0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + ti,driver-strength-ohm = <33>; + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + /* FIXME: WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi new file mode 100644 index 000000000000..846caee7dfa4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Development carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/verdin-development-board-kit + */ + +/* Verdin ETHs */ +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>; + status = "okay"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + status = "okay"; + + cpsw3g_phy1: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupt-parent = <&main_gpio0>; + interrupts = <38 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth2_rgmii_int>; + micrel,led-mode = <0>; + }; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin ETH_2_RGMII */ +&cpsw_port2 { + phy-handle = <&cpsw3g_phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>, + <&pinctrl_gpio_8>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* IO Expander */ + gpio_expander_21: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1, connector X50 through RS485 transceiver. */ +&main_uart1 { + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; + +/* Verdin I2S_1 */ +&mcasp0 { + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&ospi0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + ti,driver-strength-ohm = <33>; + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + /* FIXME: WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi new file mode 100644 index 000000000000..68d07695e1db --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM non-WB variant + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + */ + +&sdhci2 { + pinctrl-0 = <&pinctrl_sdhci2>; + bus-width = <4>; + status = "disabled"; +}; + +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi new file mode 100644 index 000000000000..90ddc71bcd30 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM WB variant + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + */ + +/ { + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_en>; + reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>; + }; +}; + +/* On-module Wi-Fi */ +&sdhci2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci2>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + ti,fails-without-test-cd; + ti,driver-strength-ohm = <50>; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +/* On-module Bluetooth */ +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi new file mode 100644 index 000000000000..cb11d6e7f525 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Yavia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/yavia + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_clk_gpio>, + <&pinctrl_qspi1_cs_gpio>, + <&pinctrl_qspi1_io0_gpio>, + <&pinctrl_qspi1_io1_gpio>, + <&pinctrl_qspi1_io2_gpio>, + <&pinctrl_qspi1_io3_gpio>; + + /* SODIMM 52 - LD1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 54 - LD1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 56 - LD1_BLUE */ + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 58 - LD2_RED */ + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 60 - LD2_GREEN */ + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 62 - LD2_BLUE */ + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin ETHs */ +&cpsw3g { + status = "okay"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + status = "okay"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>, + <&pinctrl_gpio_8>, + <&pinctrl_qspi1_cs2_gpio>; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + /* FIXME: WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi new file mode 100644 index 000000000000..57dd061911ab --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -0,0 +1,1401 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + i2c2 = &main_i2c2; + i2c3 = &mcu_i2c0; + i2c4 = &main_i2c3; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + rtc0 = &rtc_i2c; + rtc1 = &wkup_rtc0; + serial0 = &main_uart1; + serial1 = &wkup_uart0; + serial2 = &main_uart0; + serial3 = &mcu_uart0; + serial4 = &main_uart5; + usb0 = &usb0; + usb1 = &usb1; + }; + + verdin_gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_wake1_mico>; + status = "disabled"; + + verdin_key_wakeup: key-wakeup { + debounce-interval = <10>; + /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ + gpios = <&main_gpio0 32 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */ + }; + + opp-table { + /* Add 1.4GHz OPP. Requires VDD_CORE to be at 0.85V */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + }; + }; + + /* Module Power Supply */ + reg_vsodimm: regulator-vsodimm { + compatible = "regulator-fixed"; + regulator-name = "+V_SODIMM"; + }; + + /* Non PMIC On-module Supplies */ + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3"; + vin-supply = <®_vsodimm>; + }; + + reg_1v2_dsi: regulator-1v2-dsi { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "On-module +V1.2_DSI"; + vin-supply = <®_1v8>; + }; + + /* Enabled by +V1.2_DSI */ + reg_1v8_dsi: regulator-1v8-dsi { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8_DSI"; + vin-supply = <®_1v8>; + }; + + /* Enabled by +V2.5_ETH */ + reg_1v0_eth: regulator-1v0-eth { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "On-module +V1.0_ETH"; + vin-supply = <®_1v8>; + }; + + /* Enabled by +V2.5_ETH */ + reg_1v8_eth: regulator-1v8-eth { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8_ETH"; + vin-supply = <®_1v8>; + }; + + /* Verdin SD_1 Power Supply */ + reg_sdhc1_vmmc: regulator-sdhci1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_pwr_en>; + enable-active-high; + /* Verdin SD_1_PWR_EN (SODIMM 76) */ + gpio = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SD"; + startup-delay-us = <2000>; + }; + + reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vsel_sd>; + /* PMIC_VSEL_SD */ + gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; + regulator-name = "LDO1-VSEL-SD (PMIC)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <1800000 0x0>, + <3300000 0x1>; + vin-supply = <®_sd_3v3_1v8>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; +}; + +&main_pmx0 { + /* Verdin PWM_1 */ + pinctrl_epwm0_a: main-epwm0a-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b4, PIN_OUTPUT, 2) /* (A13) SPI0_CS0.EHRPWM0_A */ /* SODIMM 15 */ + >; + }; + + /* Verdin PWM_2 */ + pinctrl_epwm0_b: main-epwm0b-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (C13) SPI0_CS1.EHRPWM0_B */ /* SODIMM 16 */ + >; + }; + + /* Verdin PWM_3_DSI */ + pinctrl_epwm1_a: main-epwm1a-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01bc, PIN_OUTPUT, 2) /* (A14) SPI0_CLK.EHRPWM1_A */ /* SODIMM 19 */ + >; + }; + + /* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_clk_gpio: main-gpio0-0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0000, PIN_INPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */ /* SODIMM 52 */ + >; + }; + + /* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io0_gpio: main-gpio0-3-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ /* SODIMM 56 */ + >; + }; + + /* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io1_gpio: main-gpio0-4-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ /* SODIMM 58 */ + >; + }; + + /* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io2_gpio: main-gpio0-5-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ /* SODIMM 60 */ + >; + }; + + /* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io3_gpio: main-gpio0-6-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ /* SODIMM 62 */ + >; + }; + + /* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */ + >; + }; + + /* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_cs2_gpio: main-gpio0-12-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */ /* SODIMM 64 */ + >; + }; + + /* WiFi_W_WKUP_HOST# */ + pinctrl_wifi_w_wkup_host: main-gpio0-15-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */ /* SODIMM 174 */ + >; + }; + + /* WiFi_BT_WKUP_HOST# */ + pinctrl_bt_wkup_host: main-gpio0-16-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ /* SODIMM 172 */ + >; + }; + + /* PMIC_ETH_RESET# */ + pinctrl_eth_reset: main-gpio0-17-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0044, PIN_INPUT, 7) /* (N24) GPMC0_AD2.GPIO0_17 */ + >; + }; + + /* PMIC_BRIDGE_RESET# */ + pinctrl_bridge_reset: main-gpio0-20-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0050, PIN_INPUT, 7) /* (P22) GPMC0_AD5.GPIO0_20 */ + >; + }; + + /* PMIC_VSEL_SD */ + pinctrl_vsel_sd: main-gpio0-21-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0054, PIN_INPUT, 7) /* (P21) GPMC0_AD6.GPIO0_21 */ + >; + }; + + /* PMIC_EN_WIFI */ + pinctrl_wifi_en: main-gpio0-22-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0058, PIN_INPUT, 7) /* (R23) GPMC0_AD7.GPIO0_22 */ + >; + }; + + /* PMIC_ETH_INT# */ + pinctrl_eth_int: main-gpio0-25-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0064, PIN_INPUT_PULLUP, 7) /* (T25) GPMC0_AD10.GPIO0_25 */ + >; + }; + + /* WiFi_WKUP_BT# */ + pinctrl_wifi_wkup_bt: main-gpio0-26-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0068, PIN_INPUT, 7) /* (R21) GPMC0_AD11.GPIO0_26 */ + >; + }; + + /* WiFi_WKUP_WLAN# */ + pinctrl_wifi_wkup_wlan: main-gpio0-27-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x006c, PIN_INPUT, 7) /* (T22) GPMC0_AD12.GPIO0_27 */ + >; + }; + + /* Verdin SD_1_PWR_EN */ + pinctrl_sd1_pwr_en: main-gpio0-29-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0074, PIN_INPUT, 7) /* (U25) GPMC0_AD14.GPIO0_29 */ /* SODIMM 76 */ + >; + }; + + /* Verdin DSI_1_BKL_EN */ + pinctrl_dsi1_bkl_en: main-gpio0-30-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0078, PIN_INPUT, 7) /* (U24) GPMC0_AD15.GPIO0_30 */ /* SODIMM 21 */ + >; + }; + + /* Verdin CTRL_SLEEP_MOCI# */ + pinctrl_ctrl_sleep_moci: main-gpio0-31-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x007c, PIN_INPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ /* SODIMM 256 */ + >; + }; + + /* Verdin CTRL_WAKE1_MICO# */ + pinctrl_ctrl_wake1_mico: main-gpio0-32-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ /* SODIMM 252 */ + >; + }; + + /* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2 interface) */ + pinctrl_i2s_2_d_out_gpio: main-gpio0-34-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x008c, PIN_INPUT, 7) /* (L25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */ + >; + }; + + /* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2 interface) */ + pinctrl_i2s_2_bclk_gpio: main-gpio0-35-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0090, PIN_INPUT, 7) /* (M24) GPMC0_BE0n_CLE.GPIO0_35 */ /* SODIMM 42 */ + >; + }; + + /* Verdin GPIO_6 */ + pinctrl_gpio_6: main-gpio0-36-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0094, PIN_INPUT, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */ /* SODIMM 218 */ + >; + }; + + /* Verdin ETH_2_RGMII_INT# */ + pinctrl_eth2_rgmii_int: main-gpio0-38-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x009c, PIN_INPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ /* SODIMM 189 */ + >; + }; + + /* Verdin GPIO_5 */ + pinctrl_gpio_5: main-gpio0-40-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ /* SODIMM 216 */ + >; + }; + + /* Verdin GPIO_7 */ + pinctrl_gpio_7: main-gpio0-41-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ /* SODIMM 220 */ + >; + }; + + /* Verdin GPIO_8 */ + pinctrl_gpio_8: main-gpio0-42-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */ /* SODIMM 222 */ + >; + }; + + /* Verdin USB_1_OC# */ + pinctrl_usb1_oc: main-gpio0-71-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0124, PIN_INPUT, 7) /* (A23) MMC2_SDCD.GPIO0_71 */ /* SODIMM 157 */ + >; + }; + + /* Verdin USB_2_OC# */ + pinctrl_usb2_oc: main-gpio0-72-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0128, PIN_INPUT, 7) /* (B23) MMC2_SDWP.GPIO0_72 */ /* SODIMM 187 */ + >; + }; + + /* Verdin PWM_3_DSI as GPIO */ + pinctrl_pwm3_dsi_gpio: main-gpio1-17-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01bc, PIN_INPUT, 7) /* (A14) SPI0_CLK.GPIO1_17 */ /* SODIMM 19 */ + >; + }; + + /* Verdin QSPI_1_DQS as GPIO */ + pinctrl_qspi1_dqs_gpio: main-gpio1-18-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c0, PIN_INPUT, 7) /* (B13) SPI0_D0.GPIO1_18 */ /* SODIMM 66 */ + >; + }; + + /* Verdin USB_1_ID */ + pinctrl_usb0_id: main-gpio1-19-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1.GPIO1_19 */ /* SODIMM 161 */ + >; + }; + + /* Verdin DSI_1_INT# (pulled-up as active-low) */ + pinctrl_dsi1_int: main-gpio1-49-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0244, PIN_INPUT_PULLUP, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ /* SODIMM 17 */ + >; + }; + + /* On-module I2C - PMIC_I2C */ + pinctrl_i2c0: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e0, PIN_INPUT, 0) /* (B16) I2C0_SCL */ /* PMIC_I2C_SCL */ + AM62X_IOPAD(0x01e4, PIN_INPUT, 0) /* (A16) I2C0_SDA */ /* PMIC_I2C_SDA */ + >; + }; + + /* Verdin I2C_1 */ + pinctrl_i2c1: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ /* SODIMM 14 */ + AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ /* SODIMM 12 */ + >; + }; + + /* Verdin I2C_2_DSI */ + pinctrl_i2c2: main-i2c2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ + AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ + >; + }; + + /* Verdin I2C_4_CSI */ + pinctrl_i2c3: main-i2c3-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ + AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ + >; + }; + + /* I2S_1_MCLK */ + pinctrl_i2s1_mclk: main-system-audio-ext-reflock1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ /* SODIMM 38 */ + >; + }; + + /* Verdin I2S_1 */ + pinctrl_mcasp0: main-mcasp0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01a4, PIN_INPUT, 0) /* (B20) MCASP0_ACLKX */ /* SODIMM 30 */ + AM62X_IOPAD(0x01a8, PIN_INPUT, 0) /* (D20) MCASP0_AFSX */ /* SODIMM 32 */ + AM62X_IOPAD(0x01a0, PIN_OUTPUT, 0) /* (E18) MCASP0_AXR0 */ /* SODIMM 34 */ + AM62X_IOPAD(0x019c, PIN_INPUT, 0) /* (B18) MCASP0_AXR1 */ /* SODIMM 36 */ + >; + }; + + /* Verdin I2S_2 */ + pinctrl_mcasp1: main-mcasp1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ /* SODIMM 42 */ + AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ /* SODIMM 44 */ + AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */ /* SODIMM 46 */ + AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */ /* SODIMM 48 */ + >; + }; + + /* Verdin CAN_1 */ + pinctrl_mcan0: main-mcan0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ /* SODIMM 22 */ + AM62X_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ /* SODIMM 20 */ + >; + }; + + /* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ + pinctrl_mdio: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ /* ETH_1_MDC, SODIMM 193 */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ /* ETH_1_MDIO, SODIMM 191 */ + >; + }; + + /* On-module eMMC */ + pinctrl_sdhci0: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + /* Verdin SD_1 */ + pinctrl_sdhci1: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ /* SODIMM 74 */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ /* SODIMM 78 */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ /* SODIMM 80 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ /* SODIMM 82 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ /* SODIMM 70 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ /* SODIMM 72 */ + AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ /* SODIMM 84 */ + >; + }; + + /* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */ + pinctrl_sdhci2: main-mmc2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ /* WiFi_SDIO_CMD */ + AM62X_IOPAD(0x118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ /* WiFi_SDIO_CLK */ + AM62X_IOPAD(0x114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */ /* WiFi_SDIO_DATA0 */ + AM62X_IOPAD(0x110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */ /* WiFi_SDIO_DATA1 */ + AM62X_IOPAD(0x10c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */ /* WiFi_SDIO_DATA2 */ + AM62X_IOPAD(0x108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */ /* WiFi_SDIO_DATA3 */ + AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */ + >; + }; + + /* Verdin QSPI_1 */ + pinctrl_ospi0: main-ospi0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ /* SODIMM 52 */ + AM62X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ /* SODIMM 54 */ + AM62X_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G21) OSPI0_CSn1 */ /* SODIMM 64 */ + AM62X_IOPAD(0x000c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ /* SODIMM 56 */ + AM62X_IOPAD(0x0010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ /* SODIMM 58 */ + AM62X_IOPAD(0x0014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ /* SODIMM 60 */ + AM62X_IOPAD(0x0018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ /* SODIMM 62 */ + >; + }; + + /* Verdin ETH_1 RGMII (On-module PHY) */ + pinctrl_rgmii1: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + /* Verdin ETH_2 RGMII */ + pinctrl_rgmii2: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ /* SODIMM 201 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ /* SODIMM 203 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ /* SODIMM 205 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ /* SODIMM 207 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ /* SODIMM 197 */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ /* SODIMM 199 */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ /* SODIMM 221 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ /* SODIMM 219 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ /* SODIMM 217 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ /* SODIMM 215 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ /* SODIMM 213 */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ /* SODIMM 211 */ + >; + }; + + /* Verdin SPI_1 */ + pinctrl_spi1: main-spi1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */ + AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */ + AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0 */ /* SODIMM 200 */ + AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1 */ /* SODIMM 198 */ + >; + }; + + /* ETH_25MHz_CLK */ + pinctrl_eth_clock: main-system-clkout0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f0, PIN_OUTPUT_PULLUP, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */ + >; + }; + + /* PMIC_EXTINT# */ + pinctrl_pmic_extint: main-system-extint-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */ + >; + }; + + /* Verdin UART_3, used as the Linux console */ + pinctrl_uart0: main-uart0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT_PULLUP, 0) /* (D14) UART0_RXD */ /* SODIMM 147 */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ /* SODIMM 149 */ + >; + }; + + /* Verdin UART_1 */ + pinctrl_uart1: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0194, PIN_INPUT_PULLUP, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ /* SODIMM 135 */ + AM62X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ /* SODIMM 133 */ + AM62X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ /* SODIMM 129 */ + AM62X_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ /* SODIMM 131 */ + >; + }; + + /* Bluetooth on WB SKUs, module-specific UART otherwise */ + pinctrl_uart5: main-uart5-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0008, PIN_INPUT_PULLUP, 5) /* (J24) OSPI0_DQS.UART5_CTSn */ /* WiFi_UART_CTS */ + AM62X_IOPAD(0x0004, PIN_OUTPUT, 5) /* (G25) OSPI0_LBCLKO.UART5_RTSn */ /* WiFi_UART_RTS */ + AM62X_IOPAD(0x0034, PIN_INPUT_PULLUP, 5) /* (H21) OSPI0_CSn2.UART5_RXD */ /* WiFi_UART_RXD */ + AM62X_IOPAD(0x0038, PIN_OUTPUT, 5) /* (E24) OSPI0_CSn3.UART5_TXD */ /* WiFi_UART_TXD */ + >; + }; + + /* Verdin USB_1 */ + pinctrl_usb0: main-usb0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */ + >; + }; + + /* Verdin USB_2 */ + pinctrl_usb1: main-usb1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ /* SODIMM 185 */ + >; + }; + + /* DSS VOUT0 RGB */ + pinctrl_parallel_rgb: main-vout-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */ + AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */ + >; + }; +}; + +&mcu_pmx0 { + /* Verdin PCIE_1_RESET# */ + pinctrl_pcie_1_reset: mcu-gpio0-0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0000, PIN_INPUT, 7) /* (E8) MCU_SPI0_CS0.MCU_GPIO0_0 */ /* SODIMM 244 */ + >; + }; + + /* Verdin GPIO_1 */ + pinctrl_gpio_1: mcu-gpio0-1-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0004, PIN_INPUT, 7) /* (B8) MCU_SPI0_CS1.MCU_GPIO0_1 */ /* SODIMM 206 */ + >; + }; + + /* Verdin GPIO_2 */ + pinctrl_gpio_2: mcu-gpio0-2-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0008, PIN_INPUT, 7) /* (A7) MCU_SPI0_CLK.MCU_GPIO0_2 */ /* SODIMM 208 */ + >; + }; + + /* Verdin GPIO_3 */ + pinctrl_gpio_3: mcu-gpio0-3-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x000c, PIN_INPUT, 7) /* (D9) MCU_SPI0_D0.MCU_GPIO0_3 */ /* SODIMM 210 */ + >; + }; + + /* Verdin GPIO_4 */ + pinctrl_gpio_4: mcu-gpio0-4-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODIMM 212 */ + >; + }; + + /* Verdin I2C_3_HDMI */ + pinctrl_mcu_i2c0: mcu-i2c0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ + >; + }; + + /* Verdin UART_4 - Reserved to Cortex-M4 */ + pinctrl_mcu_uart0: mcu-uart0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0014, PIN_INPUT_PULLUP, 0) /* (B5) MCU_UART0_RXD */ /* SODIMM 151 */ + AM62X_MCU_IOPAD(0x0018, PIN_OUTPUT, 0) /* (A5) MCU_UART0_TXD */ /* SODIMM 153 */ + >; + }; + + /* Verdin CSI_1_MCLK */ + pinctrl_csi1_mclk: wkup-clkout0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ /* SODIMM 91 */ + >; + }; + + /* Verdin UART_2 */ + pinctrl_wkup_uart0: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x002c, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_UART0_CTSn */ /* SODIMM 143 */ + AM62X_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (A4) WKUP_UART0_RTSn */ /* SODIMM 141 */ + AM62X_MCU_IOPAD(0x0024, PIN_INPUT_PULLUP, 0) /* (B4) WKUP_UART0_RXD */ /* SODIMM 137 */ + AM62X_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (C5) WKUP_UART0_TXD */ /* SODIMM 139 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; + status = "disabled"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + phy-handle = <&cpsw3g_phy0>; + phy-mode = "rgmii-rxid"; + status = "disabled"; +}; + +/* Verdin ETH_2_RGMII */ +&cpsw_port2 { + status = "disabled"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + assigned-clocks = <&k3_clks 157 20>; + assigned-clock-parents = <&k3_clks 157 22>; + assigned-clock-rates = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_clock>, <&pinctrl_mdio>; + status = "disabled"; + + cpsw3g_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.a231"; + reg = <0>; + interrupt-parent = <&main_gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_int>, <&pinctrl_eth_reset>; + reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <1000>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epwm0_a>, <&pinctrl_epwm0_b>; + status = "disabled"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epwm1_a>; + status = "disabled"; +}; + +&main_gpio0 { + gpio-line-names = + "SODIMM_52", /* 0 */ + "", + "", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "", + "", + "", + "", /* 10 */ + "SODIMM_54", + "SODIMM_64", + "", + "", + "SODIMM_174", + "SODIMM_172", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_76", + "SODIMM_21", /* 30 */ + "SODIMM_256", + "SODIMM_252", + "", + "SODIMM_46", + "SODIMM_42", + "SODIMM_218", + "", + "SODIMM_189", + "", + "SODIMM_216", /* 40 */ + "SODIMM_220", + "SODIMM_222", + "", + "", + "", + "", + "", + "", + "", + "", /* 50 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 60 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 70 */ + "SODIMM_157", + "SODIMM_187", + "", + "", + "", + "", + "", + "", + "", + "", /* 80 */ + "", + "", + "", + "", + "", + ""; + + verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <31 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + }; +}; + +&main_gpio1 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "SODIMM_15", + "SODIMM_16", + "SODIMM_19", + "SODIMM_66", + "SODIMM_161", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 30 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 40 */ + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_17", + "", /* 50 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 60 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 70 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 80 */ + "", + "", + "", + "", + "", + "", + ""; +}; + +/* On-module I2C - PMIC_I2C */ +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clock-frequency = <400000>; + status = "okay"; + + dsi_bridge: dsi@e { + compatible = "toshiba,tc358778"; + reg = <0xe>; + assigned-clocks = <&k3_clks 157 20>; + assigned-clock-parents = <&k3_clks 157 22>; + assigned-clock-rates = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bridge_reset>; + clocks = <&k3_clks 157 20>; + clock-names = "refclk"; + reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>; + vddc-supply = <®_1v2_dsi>; + vddmipi-supply = <®_1v2_dsi>; + vddio-supply = <®_1v8_dsi>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + rgb_in: endpoint { + data-lines = <18>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_extint>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + + buck1-supply = <®_vsodimm>; + buck2-supply = <®_vsodimm>; + buck3-supply = <®_vsodimm>; + ldo1-supply = <®_3v3>; + ldo2-supply = <®_1v8>; + ldo3-supply = <®_3v3>; + ldo4-supply = <®_3v3>; + system-power-controller; + ti,power-button; + + regulators { + reg_vdd_core: buck1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+VDD_CORE (PMIC BUCK1)"; + }; + + reg_1v8: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8 (PMIC BUCK2)"; /* On-module and SODIMM 214 */ + }; + + reg_vdd_ddr: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+VDD_DDR (PMIC BUCK3)"; + }; + + reg_sd_3v3_1v8: ldo1 { + regulator-allow-bypass; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_1.8_SD (PMIC LDO1)"; + }; + + reg_vddr_core: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+VDDR_CORE (PMIC LDO2)"; + }; + + reg_1v8a: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8A (PMIC LDO3)"; + }; + + reg_eth_2v5: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <2500000>; + regulator-name = "+V2.5_ETH (PMIC LDO4)"; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + }; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Verdin PMIC_I2C (ADC_4 - ADC_3) */ + channel@0 { + reg = <0>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C (ADC_4 - ADC_1) */ + channel@1 { + reg = <1>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C (ADC_3 - ADC_1) */ + channel@2 { + reg = <2>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C (ADC_2 - ADC_1) */ + channel@3 { + reg = <3>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_4 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_3 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_1 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <2>; + }; + }; + + eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "disabled"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&mailbox0_cluster0 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcan0>; + status = "disabled"; +}; + +/* Verdin CAN_2 - Reserved to Cortex-M4 */ + +/* Verdin SPI_1 */ +&main_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + ti,pindir-d0-out-d1-in; + status = "disabled"; +}; + +/* Verdin UART_3, used as the Linux console */ +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; +}; + +/* Verdin I2S_1 */ +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcasp0>; + op-mode = <0>; /* I2S mode */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tdm-slots = <2>; + rx-num-evt = <32>; + tx-num-evt = <32>; + #sound-dai-cells = <0>; + status = "disabled"; +}; + +/* Verdin I2S_2 */ +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcasp1>; + op-mode = <0>; /* I2S mode */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tdm-slots = <2>; + rx-num-evt = <32>; + tx-num-evt = <32>; + #sound-dai-cells = <0>; + status = "disabled"; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_i2c0>; + status = "disabled"; +}; + +&mcu_gpio0 { + gpio-line-names = + "SODIMM_244", + "SODIMM_206", + "SODIMM_208", + "SODIMM_210", + "SODIMM_212", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +/* Verdin UART_4 - Cortex-M4 UART */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_uart0>; + status = "disabled"; +}; + +/* Verdin QSPI_1 */ +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ospi0>; + status = "disabled"; +}; + +/* On-module eMMC */ +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0>; + non-removable; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1>; + disable-wp; + ti,driver-strength-ohm = <50>; + vmmc-supply = <®_sdhc1_vmmc>; + vqmmc-supply = <®_sdhc1_vqmmc>; + status = "disabled"; +}; + +/* Verdin USB_1 */ +&usbss0 { + ti,vbus-divider; + status = "disabled"; +}; + +/* TODO: role swich using ID pin */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>; + status = "disabled"; +}; + +/* Verdin USB_2 */ +&usbss1 { + ti,vbus-divider; + status = "disabled"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + dr_mode = "host"; + status = "disabled"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wkup_uart0>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 7726ebae2539..eae052887186 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -61,4 +61,12 @@ /* Used by DM firmware */ status = "reserved"; }; + + wkup_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index a401f5225243..5e72c445f37a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -81,6 +81,7 @@ <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Wakeup Domain Range */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; @@ -91,14 +92,17 @@ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ }; - cbass_wakeup: bus@2b000000 { + cbass_wakeup: bus@b00000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; - ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; }; }; + + #include "k3-am62-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index cb46c38ce2cc..589bf998bc52 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -216,7 +216,7 @@ }; &main_pmx0 { - gpio0_pins_default: gpio0-pins-default { + gpio0_pins_default: gpio0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */ AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */ @@ -235,47 +235,47 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-pins-default { + vdd_sd_dv_pins_default: vdd-sd-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ >; }; - usr_button_pins_default: usr-button-pins-default { + usr_button_pins_default: usr-button-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */ >; }; - grove_pins_default: grove-pins-default { + grove_pins_default: grove-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; }; - local_i2c_pins_default: local-i2c-pins-default { + local_i2c_pins_default: local-i2c-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ >; }; - i2c2_1v8_pins_default: i2c2-pins-default { + i2c2_1v8_pins_default: i2c2-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ >; }; - mdio0_pins_default: mdio0-pins-default { + mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */ AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ @@ -292,7 +292,7 @@ >; }; - emmc_pins_default: emmc-pins-default { + emmc_pins_default: emmc-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ @@ -307,13 +307,13 @@ >; }; - vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default { + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */ >; }; - sd_pins_default: sd-pins-default { + sd_pins_default: sd-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ @@ -325,7 +325,7 @@ >; }; - wifi_pins_default: wifi-pins-default { + wifi_pins_default: wifi-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ @@ -338,19 +338,19 @@ >; }; - wifi_en_pins_default: wifi-en-pins-default { + wifi_en_pins_default: wifi-en-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ >; }; - wifi_wlirq_pins_default: wifi-wlirq-pins-default { + wifi_wlirq_pins_default: wifi-wlirq-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ >; }; - spe_pins_default: spe-pins-default { + spe_pins_default: spe-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */ AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */ @@ -366,21 +366,21 @@ >; }; - mikrobus_i2c_pins_default: mikrobus-i2c-pins-default { + mikrobus_i2c_pins_default: mikrobus-i2c-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ >; }; - mikrobus_uart_pins_default: mikrobus-uart-pins-default { + mikrobus_uart_pins_default: mikrobus-uart-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */ AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */ >; }; - mikrobus_spi_pins_default: mikrobus-spi-pins-default { + mikrobus_spi_pins_default: mikrobus-spi-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */ AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */ @@ -389,7 +389,7 @@ >; }; - mikrobus_gpio_pins_default: mikrobus-gpio-pins-default { + mikrobus_gpio_pins_default: mikrobus-gpio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */ AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */ @@ -397,27 +397,27 @@ >; }; - console_pins_default: console-pins-default { + console_pins_default: console-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ >; }; - wifi_debug_uart_pins_default: wifi-debug-uart-pins-default { + wifi_debug_uart_pins_default: wifi-debug-uart-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */ AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */ >; }; - pmic_irq_pins_default: pmic-irq-pins-default { + pmic_irq_pins_default: pmic-irq-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */ >; @@ -425,7 +425,7 @@ }; &mcu_pmx0 { - i2c_qwiic_pins_default: i2c-qwiic-pins-default { + i2c_qwiic_pins_default: i2c-qwiic-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ @@ -438,14 +438,14 @@ >; }; - i2c_csi_pins_default: i2c-csi-pins-default { + i2c_csi_pins_default: i2c-csi-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */ AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */ >; }; - wifi_32k_clk: mcu-clk-out-pins-default { + wifi_32k_clk: mcu-clk-out-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts new file mode 100644 index 000000000000..a438baf542c2 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am62x + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-am625.dtsi" +#include "k3-am62-phycore-som.dtsi" + +/ { + compatible = "phytec,am625-phyboard-lyra-rdk", + "phytec,am62-phycore-som", "ti,am625"; + model = "PHYTEC phyBOARD-Lyra AM625"; + + aliases { + serial2 = &main_uart0; + serial3 = &main_uart1; + mmc1 = &sdhci1; + usb0 = &usb0; + usb1 = &usb1; + ethernet1 = &cpsw_port2; + }; + + can_tc1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + + key-home { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + key-menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; + + led-1 { + gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + led-2 { + gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + }; + + vcc_3v3_mmc: regulator-vcc-3v3-mmc { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + gpio_keys_pins_default: gpio-keys-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ + >; + }; + + gpio_exp_int_pins_default: gpio-exp-int-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ + AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ + >; + }; + + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ + AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ + AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ + AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ + >; + }; + + main_usb1_pins_default: main-usb1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + user_leds_pins_default: user-leds-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy3>; +}; + +&cpsw3g_mdio { + cpsw3g_phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + gpio_exp: gpio-expander@21 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio_exp_int_pins_default>; + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupt-parent = <&main_gpio1>; + interrupts = <49 0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN", + "GPIO2_LED2", "GPIO3_LVDS_GPIO", + "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", + "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x51>; + }; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&can_tc1>; + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + /* Main UART1 may be used by TIFS firmware */ + status = "okay"; +}; + +&sdhci1 { + vmmc-supply = <&vcc_3v3_mmc>; + vqmmc-supply = <&vddshv5_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2a1adda9bff6..3f9ef4053aa6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -101,7 +101,7 @@ }; &main_pmx0 { - main_rgmii2_pins_default: main-rgmii2-pins-default { + main_rgmii2_pins_default: main-rgmii2-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ @@ -118,7 +118,7 @@ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ @@ -134,13 +134,13 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ >; }; - main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ >; @@ -161,7 +161,7 @@ "UART1_FET_BUF_EN", "WL_LT_EN", "GPIO_HDMI_RSTn", "CSI_GPIO1", "CSI_GPIO2", "PRU_3V3_EN", - "HDMI_INTn", "TEST_GPIO2", + "HDMI_INTn", "PD_I2C_IRQ", "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", "MCASP1_FET_SEL", "UART1_FET_SEL", "TSINT#", "IO_EXP_TEST_LED"; @@ -183,8 +183,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default - &main_rgmii2_pins_default>; + pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; }; &cpsw_port2 { diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts new file mode 100644 index 000000000000..d38bfef29d71 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin AM62 on Dahlia Board"; + compatible = "toradex,verdin-am62-nonwifi-dahlia", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts new file mode 100644 index 000000000000..31d2a3066d43 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/verdin-development-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin AM62 on Verdin Development Board"; + compatible = "toradex,verdin-am62-nonwifi-dev", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts new file mode 100644 index 000000000000..e80332e1f030 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/yavia + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin AM62 on Yavia Board"; + compatible = "toradex,verdin-am62-nonwifi-yavia", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts new file mode 100644 index 000000000000..3850a706edb7 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Dahlia Board"; + compatible = "toradex,verdin-am62-wifi-dahlia", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts new file mode 100644 index 000000000000..4b657d6d3e0d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/verdin-development-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Verdin Development Board"; + compatible = "toradex,verdin-am62-wifi-dev", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts new file mode 100644 index 000000000000..8a2506068ac4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/yavia + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Yavia Board"; + compatible = "toradex,verdin-am62-wifi-yavia", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 393a1a40b68b..8b315cc61550 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -169,6 +169,21 @@ }; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; @@ -177,6 +192,102 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 36 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 2>; + assigned-clock-parents = <&k3_clks 36 3>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 37 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 2>; + assigned-clock-parents = <&k3_clks 37 3>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 38 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 2>; + assigned-clock-parents = <&k3_clks 38 3>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 39 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 2>; + assigned-clock-parents = <&k3_clks 39 3>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 40 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 2>; + assigned-clock-parents = <&k3_clks 40 3>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 41 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 2>; + assigned-clock-parents = <&k3_clks 41 3>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 42 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 2>; + assigned-clock-parents = <&k3_clks 42 3>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 43 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 2>; + assigned-clock-parents = <&k3_clks 43 3>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -601,6 +712,51 @@ status = "disabled"; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti4: watchdog@e040000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e040000 0x00 0x100>; + clocks = <&k3_clks 205 0>; + power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 205 0>; + assigned-clock-parents = <&k3_clks 205 2>; + }; + epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi index 2bb813e784a2..04599762c2b7 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi @@ -15,6 +15,51 @@ status = "disabled"; }; + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@4800000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4800000 0x00 0x400>; + clocks = <&k3_clks 35 2>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@4810000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4810000 0x00 0x400>; + clocks = <&k3_clks 48 2>; + clock-names = "fck"; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@4820000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4820000 0x00 0x400>; + clocks = <&k3_clks 49 2>; + clock-names = "fck"; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@4830000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4830000 0x00 0x400>; + clocks = <&k3_clks 50 2>; + clock-names = "fck"; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; @@ -87,4 +132,15 @@ clock-names = "gpio"; status = "disabled"; }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + /* Tightly coupled to M4F */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi new file mode 100644 index 000000000000..85ce545633ea --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 81d984414fd4..4e8279fa01e1 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -51,4 +51,23 @@ wakeup-source; status = "disabled"; }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* Used by DM firmware */ + status = "reserved"; + }; + + wkup_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index fe60c9ce21e3..61a210ecd5ff 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -115,6 +115,8 @@ <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ }; }; + + #include "k3-am62a-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index f6a67f072dca..ecc0e13331c4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -17,7 +17,9 @@ model = "Texas Instruments AM62A7 SK"; aliases { + serial0 = &wkup_uart0; serial2 = &main_uart0; + serial3 = &main_uart1; mmc1 = &sdhci1; }; @@ -114,36 +116,63 @@ }; }; +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ + AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ + AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ + AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ + >; + }; +}; + +/* WKUP UART0 is used for DM firmware logs */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; +}; + &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < - AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ + AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ + AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ + AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ @@ -155,26 +184,26 @@ >; }; - usr_led_pins_default: usr-led-pins-default { + usr_led_pins_default: usr-led-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ >; }; - main_usb1_pins_default: main-usb1-pins-default { + main_usb1_pins_default: main-usb1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ >; }; - main_mdio1_pins_default: main-mdio1-pins-default { + main_mdio1_pins_default: main-mdio1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; }; - main_rgmii1_pins_default: main-rgmii1-pins-default { + main_rgmii1_pins_default: main-rgmii1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ @@ -254,6 +283,13 @@ pinctrl-0 = <&main_uart0_pins_default>; }; +/* Main UART1 is used for TIFS firmware logs */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + status = "reserved"; +}; + &usbss1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 976f8303c84f..34c8ffc553ec 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -25,14 +25,12 @@ chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -120,35 +118,44 @@ &main_pmx0 { /* First pad number is ALW package and second is AMC package */ - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */ + AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */ + AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */ + AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */ AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */ AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ >; }; - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ @@ -163,7 +170,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ @@ -175,20 +182,20 @@ >; }; - usr_led_pins_default: usr-led-pins-default { + usr_led_pins_default: usr-led-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */ >; }; - main_mdio1_pins_default: main-mdio1-pins-default { + main_mdio1_pins_default: main-mdio1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */ AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */ >; }; - main_rgmii1_pins_default: main-rgmii1-pins-default { + main_rgmii1_pins_default: main-rgmii1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */ AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */ @@ -205,18 +212,29 @@ >; }; - main_usb1_pins_default: main-usb1-pins-default { + main_usb1_pins_default: main-usb1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */ >; }; - main_mcasp1_pins_default: main-mcasp1-pins-default { + main_mcasp1_pins_default: main-mcasp1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */ + AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */ + AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */ + AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + >; + }; +}; + +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */ - AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ - AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */ - AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */ + AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */ + AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */ + AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */ >; }; }; @@ -224,6 +242,8 @@ &wkup_uart0 { /* WKUP UART0 is used by DM firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &main_uart0 { @@ -235,6 +255,8 @@ &main_uart1 { /* Main UART1 is used by TIFS firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_i2c0 { @@ -242,6 +264,36 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T or M24512-DFMC6TG */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; + + typec_pd0: tps6598x@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + }; }; &main_i2c1 { @@ -321,7 +373,16 @@ }; &usb0 { - dr_mode = "peripheral"; + #address-cells = <1>; + #size-cells = <0>; + usb-role-switch; + + port@0 { + reg = <0>; + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; }; &usb1 { diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 5e8036f32d79..1664d9f0241c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -228,12 +228,161 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 36 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 1>; + assigned-clock-parents = <&k3_clks 36 2>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 37 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 1>; + assigned-clock-parents = <&k3_clks 37 2>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 38 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 1>; + assigned-clock-parents = <&k3_clks 38 2>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 39 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 1>; + assigned-clock-parents = <&k3_clks 39 2>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 40 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 1>; + assigned-clock-parents = <&k3_clks 40 2>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 41 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 1>; + assigned-clock-parents = <&k3_clks 41 2>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 42 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 1>; + assigned-clock-parents = <&k3_clks 42 2>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 43 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 1>; + assigned-clock-parents = <&k3_clks 43 2>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 44 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 44 1>; + assigned-clock-parents = <&k3_clks 44 2>; + power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 45 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 45 1>; + assigned-clock-parents = <&k3_clks 45 2>; + power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 46 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 46 1>; + assigned-clock-parents = <&k3_clks 46 2>; + power-domains = <&k3_pds 46 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 47 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 47 1>; + assigned-clock-parents = <&k3_clks 47 2>; + power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>; + }; + main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 146 0>; clock-names = "fclk"; @@ -245,7 +394,6 @@ reg = <0x00 0x02810000 0x00 0x100>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 152 0>; clock-names = "fclk"; @@ -257,7 +405,6 @@ reg = <0x00 0x02820000 0x00 0x100>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 153 0>; clock-names = "fclk"; @@ -269,7 +416,6 @@ reg = <0x00 0x02830000 0x00 0x100>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 154 0>; clock-names = "fclk"; @@ -281,7 +427,6 @@ reg = <0x00 0x02840000 0x00 0x100>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 155 0>; clock-names = "fclk"; @@ -293,7 +438,6 @@ reg = <0x00 0x02850000 0x00 0x100>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 156 0>; clock-names = "fclk"; @@ -305,7 +449,6 @@ reg = <0x00 0x02860000 0x00 0x100>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 158 0>; clock-names = "fclk"; @@ -676,6 +819,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster3: mailbox@29030000 { @@ -686,6 +830,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster4: mailbox@29040000 { @@ -696,6 +841,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster5: mailbox@29050000 { @@ -706,6 +852,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster6: mailbox@29060000 { @@ -715,6 +862,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster7: mailbox@29070000 { @@ -724,6 +872,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; main_r5fss0: r5fss@78000000 { @@ -1392,4 +1541,12 @@ clock-names = "fck"; status = "disabled"; }; + + main_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 38ddf0b3b8a0..686d49790721 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -6,11 +6,55 @@ */ &cbass_mcu { + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@4800000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4800000 0x00 0x400>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@4810000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4810000 0x00 0x400>; + clocks = <&k3_clks 48 1>; + clock-names = "fck"; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@4820000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4820000 0x00 0x400>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@4830000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4830000 0x00 0x400>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 149 0>; clock-names = "fclk"; @@ -21,7 +65,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 160 0>; clock-names = "fclk"; @@ -109,4 +152,10 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; + + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x4100000 0x00 0x1000>; + ti,esm-pins = <0>, <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index 8dfb6301b17d..5606d775153d 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -66,7 +66,7 @@ }; &main_pmx0 { - cpsw_mdio_pins_default: cpsw-mdio-pins-default { + cpsw_mdio_pins_default: cpsw-mdio-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ @@ -74,7 +74,7 @@ >; }; - cpsw_rgmii1_pins_default: cpsw-rgmii1-pins-default { + cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ @@ -92,26 +92,26 @@ >; }; - eeprom_wp_pins_default: eeprom-wp-pins-default { + eeprom_wp_pins_default: eeprom-wp-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */ >; }; - leds_pins_default: leds-pins-default { + leds_pins_default: leds-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ @@ -160,30 +160,6 @@ status = "disabled"; }; -&mailbox0_cluster2 { - status = "disabled"; -}; - -&mailbox0_cluster3 { - status = "disabled"; -}; - -&mailbox0_cluster4 { - status = "disabled"; -}; - -&mailbox0_cluster5 { - status = "disabled"; -}; - -&mailbox0_cluster6 { - status = "disabled"; -}; - -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_i2c0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi new file mode 100644 index 000000000000..036db56ba797 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&main_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&main_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 60fe95b48312..8e9c2bc70f4d 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -19,22 +19,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &mcu_uart0; - serial1 = &mcu_uart1; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - chosen { }; firmware { @@ -70,6 +54,7 @@ <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */ @@ -106,6 +91,8 @@ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ }; }; + + #include "k3-am64-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 39feea78a084..15c282c93467 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -17,15 +17,26 @@ model = "Texas Instruments AM642 EVM"; chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + stdout-path = &main_uart0; + }; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart1; + serial2 = &main_uart0; + serial3 = &main_uart3; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -94,7 +105,7 @@ }; }; - evm_12v0: fixedregulator-evm12v0 { + evm_12v0: regulator-0 { /* main DC jack */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; @@ -104,7 +115,7 @@ regulator-boot-on; }; - vsys_5v0: fixedregulator-vsys5v0 { + vsys_5v0: regulator-1 { /* output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_5v0"; @@ -115,7 +126,7 @@ regulator-boot-on; }; - vsys_3v3: fixedregulator-vsys3v3 { + vsys_3v3: regulator-2 { /* output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_3v3"; @@ -126,7 +137,7 @@ regulator-boot-on; }; - vdd_mmc1: fixed-regulator-sd { + vdd_mmc1: regulator-3 { /* TPS2051BD */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; @@ -138,7 +149,7 @@ gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; }; - vddb: fixedregulator-vddb { + vddb: regulator-4 { compatible = "regulator-fixed"; regulator-name = "vddb_3v3_display"; regulator-min-microvolt = <3300000>; @@ -148,6 +159,20 @@ regulator-boot-on; }; + vtt_supply: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + pinctrl-names = "default"; + pinctrl-0 = <&ddr_vtt_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + vin-supply = <&vsys_3v3>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; @@ -201,7 +226,7 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ @@ -215,7 +240,16 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -224,7 +258,7 @@ >; }; - main_spi0_pins_default: main-spi0-pins-default { + main_spi0_pins_default: main-spi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ @@ -233,21 +267,28 @@ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ >; }; - mdio1_pins_default: mdio1-pins-default { + mdio1_pins_default: mdio1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ @@ -264,7 +305,7 @@ >; }; - rgmii2_pins_default: rgmii2-pins-default { + rgmii2_pins_default: rgmii2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -281,13 +322,13 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ @@ -303,36 +344,58 @@ >; }; - main_ecap0_pins_default: main-ecap0-pins-default { + main_ecap0_pins_default: main-ecap0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ >; }; - main_mcan1_pins_default: main-mcan1-pins-default { + main_mcan1_pins_default: main-mcan1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ >; }; + + ddr_vtt_pins_default: ddr-vtt-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ + >; + }; }; &main_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; /* main_uart1 is reserved for firmware usage */ &main_uart1 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* AT24CM01 */ + compatible = "atmel,24c1024"; + reg = <0x50>; + }; }; &main_i2c1 { @@ -425,8 +488,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default - &rgmii2_pins_default>; + pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { @@ -471,10 +533,53 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; &mailbox0_cluster2 { + status = "okay"; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -486,11 +591,9 @@ }; }; -&mailbox0_cluster3 { - status = "disabled"; -}; - &mailbox0_cluster4 { + status = "okay"; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -502,41 +605,35 @@ }; }; -&mailbox0_cluster5 { - status = "disabled"; -}; - &mailbox0_cluster6 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; }; }; -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index 8d3114d14a8b..9c418abd29d8 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -15,6 +15,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> #include <dt-bindings/mux/ti-serdes.h> #include <dt-bindings/phy/phy.h> #include "k3-am642.dtsi" @@ -75,7 +76,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default &user_leds_pins_default>; + pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; led-1 { color = <LED_COLOR_ID_RED>; @@ -104,47 +105,47 @@ }; &main_pmx0 { - can_tc1_pins_default: can-tc1-pins-default { + can_tc1_pins_default: can-tc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */ >; }; - can_tc2_pins_default: can-tc2-pins-default { + can_tc2_pins_default: can-tc2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */ >; }; - gpio_keys_pins_default: gpio-keys-pins-default { + gpio_keys_pins_default: gpio-keys-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */ AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ >; }; - main_mcan1_pins_default: main-mcan1-pins-default { + main_mcan1_pins_default: main-mcan1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ @@ -157,14 +158,14 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ >; }; - main_uart1_pins_default: main-uart1-pins-default { + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ AM64X_IOPAD(0x024C, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ @@ -173,25 +174,25 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - pcie_usb_sel_pins_default: pcie-usb-sel-pins-default { + pcie_usb_sel_pins_default: pcie-usb-sel-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ >; }; - pcie0_pins_default: pcie0-pins-default { + pcie0_pins_default: pcie0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ >; }; - user_leds_pins_default: user-leds-pins-default { + user_leds_pins_default: user-leds-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */ AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */ @@ -210,6 +211,26 @@ pagesize = <16>; reg = <0x51>; }; + + led-controller@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-3 { + label = "red:user"; + type = <PCA9532_TYPE_LED>; + }; + + led-4 { + label = "green:user"; + type = <PCA9532_TYPE_LED>; + }; + + led-5 { + label = "blue:user"; + type = <PCA9532_TYPE_LED>; + }; + }; }; &main_mcan0 { @@ -230,6 +251,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; &main_uart1 { @@ -237,6 +259,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; uart-has-rtscts; + current-speed = <115200>; }; &sdhci1 { diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 2e2d40da360a..cbce43dbe3f9 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -17,15 +17,25 @@ model = "Texas Instruments AM642 SK"; chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + stdout-path = &main_uart0; + }; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart1; + serial2 = &main_uart0; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -94,7 +104,7 @@ }; }; - vusb_main: fixed-regulator-vusb-main5v0 { + vusb_main: regulator-0 { /* USB MAIN INPUT 5V DC */ compatible = "regulator-fixed"; regulator-name = "vusb_main5v0"; @@ -104,7 +114,7 @@ regulator-boot-on; }; - vcc_3v3_sys: fixedregulator-vcc-3v3-sys { + vcc_3v3_sys: regulator-1 { /* output of LP8733xx */ compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; @@ -115,7 +125,7 @@ regulator-boot-on; }; - vdd_mmc1: fixed-regulator-sd { + vdd_mmc1: regulator-2 { /* TPS2051BD */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; @@ -127,7 +137,7 @@ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; - com8_ls_en: regulator-1 { + com8_ls_en: regulator-3 { compatible = "regulator-fixed"; regulator-name = "com8_ls_en"; regulator-min-microvolt = <3300000>; @@ -139,7 +149,7 @@ gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; }; - wlan_en: regulator-2 { + wlan_en: regulator-4 { /* output of SN74AVC4T245RSVR */ compatible = "regulator-fixed"; regulator-name = "wlan_en"; @@ -222,20 +232,21 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < - AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */ + AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */ - AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */ - AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */ - AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */ - AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */ - AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */ - AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */ + AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -244,27 +255,43 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ >; }; - mdio1_pins_default: mdio1-pins-default { + mdio1_pins_default: mdio1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */ AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */ @@ -281,7 +308,7 @@ >; }; - rgmii2_pins_default: rgmii2-pins-default { + rgmii2_pins_default: rgmii2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -298,7 +325,7 @@ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ @@ -314,24 +341,24 @@ >; }; - main_ecap0_pins_default: main-ecap0-pins-default { + main_ecap0_pins_default: main-ecap0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; - main_wlan_en_pins_default: main-wlan-en-pins-default { + main_wlan_en_pins_default: main-wlan-en-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ >; }; - main_com8_ls_en_pins_default: main-com8-ls-en-pins-default { + main_com8_ls_en_pins_default: main-com8-ls-en-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ >; }; - main_wlan_pins_default: main-wlan-pins-default { + main_wlan_pins_default: main-wlan-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ >; @@ -342,11 +369,26 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; &main_uart1 { /* main_uart1 is reserved for firmware usage */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + compatible = "atmel,24c512"; + reg = <0x51>; + }; }; &main_i2c1 { @@ -439,8 +481,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default - &rgmii2_pins_default>; + pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { @@ -490,10 +531,53 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; &mailbox0_cluster2 { + status = "okay"; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -505,11 +589,9 @@ }; }; -&mailbox0_cluster3 { - status = "disabled"; -}; - &mailbox0_cluster4 { + status = "okay"; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -521,41 +603,35 @@ }; }; -&mailbox0_cluster5 { - status = "disabled"; -}; - &mailbox0_cluster6 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; }; }; -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 96ac2b476b11..e26bd988e522 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -21,7 +21,6 @@ chosen { stdout-path = "serial3:115200n8"; - bootargs = "earlycon=ns16550a,mmio32,0x02810000"; }; reserved-memory { @@ -105,7 +104,7 @@ }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) @@ -114,7 +113,7 @@ >; }; - mcu_i2c0_pins_default: mcu-i2c0-pins-default { + mcu_i2c0_pins_default: mcu-i2c0-default-pins { pinctrl-single,pins = < /* (AD8) MCU_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) @@ -123,21 +122,21 @@ >; }; - arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-pins-default { + arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins { pinctrl-single,pins = < /* (R2) WKUP_GPIO0_21 */ AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7) >; }; - push_button_pins_default: push-button-pins-default { + push_button_pins_default: push-button-default-pins { pinctrl-single,pins = < /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) >; }; - arduino_uart_pins_default: arduino-uart-pins-default { + arduino_uart_pins_default: arduino-uart-default-pins { pinctrl-single,pins = < /* (P4) MCU_UART0_RXD */ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) @@ -146,7 +145,7 @@ >; }; - arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-pins-default { + arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { pinctrl-single,pins = < /* (P1) WKUP_GPIO0_31 */ AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) @@ -155,7 +154,7 @@ >; }; - arduino_io_oe_pins_default: arduino-io-oe-pins-default { + arduino_io_oe_pins_default: arduino-io-oe-default-pins { pinctrl-single,pins = < /* (N4) WKUP_GPIO0_34 */ AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7) @@ -170,7 +169,7 @@ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) @@ -185,7 +184,7 @@ >; }; - db9_com_mode_pins_default: db9-com-mode-pins-default { + db9_com_mode_pins_default: db9-com-mode-default-pins { pinctrl-single,pins = < /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */ AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7) @@ -198,7 +197,7 @@ >; }; - leds_pins_default: leds-pins-default { + leds_pins_default: leds-default-pins { pinctrl-single,pins = < /* (T2) WKUP_GPIO0_17, used as user led1 red */ AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7) @@ -211,7 +210,7 @@ >; }; - mcu_spi0_pins_default: mcu-spi0-pins-default { + mcu_spi0_pins_default: mcu-spi0-default-pins { pinctrl-single,pins = < /* (Y1) MCU_SPI0_CLK */ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) @@ -224,7 +223,7 @@ >; }; - minipcie_pins_default: minipcie-pins-default { + minipcie_pins_default: minipcie-default-pins { pinctrl-single,pins = < /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */ AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7) @@ -233,7 +232,7 @@ }; &main_pmx0 { - main_uart1_pins_default: main-uart1-pins-default { + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */ @@ -242,14 +241,14 @@ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */ AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -262,19 +261,19 @@ >; }; - usb0_pins_default: usb0-pins-default { + usb0_pins_default: usb0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; }; - arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-pins-default { + arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ @@ -285,7 +284,7 @@ >; }; - dss_vout1_pins_default: dss-vout1-pins-default { + dss_vout1_pins_default: dss-vout1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ @@ -318,13 +317,13 @@ >; }; - dp_pins_default: dp-pins-default { + dp_pins_default: dp-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ @@ -333,21 +332,21 @@ }; &main_pmx1 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - ecap0_pins_default: ecap0-pins-default { + ecap0_pins_default: ecap0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ >; @@ -385,13 +384,12 @@ &wkup_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &arduino_io_d2_to_d3_pins_default - &arduino_i2c_aio_switch_pins_default - &arduino_io_oe_pins_default - &push_button_pins_default - &db9_com_mode_pins_default - >; + pinctrl-0 = + <&arduino_io_d2_to_d3_pins_default>, + <&arduino_i2c_aio_switch_pins_default>, + <&arduino_io_oe_pins_default>, + <&push_button_pins_default>, + <&db9_com_mode_pins_default>; gpio-line-names = /* 0..9 */ "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", @@ -483,7 +481,7 @@ pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; - rtc: rtc8564@51 { + rtc: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -712,11 +710,11 @@ &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 1adba2f2c153..3f8ff2589842 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -469,7 +469,6 @@ ti,otap-del-sel-ddr52 = <0x4>; ti,otap-del-sel-hs200 = <0x7>; ti,clkbuf-sel = <0x7>; - ti,otap-del-sel = <0x2>; ti,trm-icp = <0x8>; dma-coherent; }; @@ -481,21 +480,6 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - pcie0_mode: pcie-mode@4060 { - compatible = "syscon"; - reg = <0x00004060 0x4>; - }; - - pcie1_mode: pcie-mode@4070 { - compatible = "syscon"; - reg = <0x00004070 0x4>; - }; - - pcie_devid: pcie-devid@210 { - compatible = "syscon"; - reg = <0x00000210 0x4>; - }; - serdes0_clk: clock@4080 { compatible = "syscon"; reg = <0x00004080 0x4>; @@ -883,8 +867,8 @@ #size-cells = <2>; ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>, <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&pcie_devid>; - ti,syscon-pcie-mode = <&pcie0_mode>; + ti,syscon-pcie-id = <&scm_conf 0x210>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; bus-range = <0x0 0xff>; num-viewport = <16>; max-link-speed = <2>; @@ -900,7 +884,7 @@ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&pcie0_mode>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; num-ib-windows = <16>; num-ob-windows = <16>; max-link-speed = <2>; @@ -918,8 +902,8 @@ #size-cells = <2>; ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>, <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&pcie_devid>; - ti,syscon-pcie-mode = <&pcie1_mode>; + ti,syscon-pcie-id = <&scm_conf 0x210>; + ti,syscon-pcie-mode = <&scm_conf 0x4070>; bus-range = <0x0 0xff>; num-viewport = <16>; max-link-speed = <2>; @@ -935,7 +919,7 @@ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&pcie1_mode>; + ti,syscon-pcie-mode = <&scm_conf 0x4070>; num-ib-windows = <16>; num-ob-windows = <16>; max-link-speed = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 5dfa31840e9c..b7a4b5a89aaf 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -227,7 +227,22 @@ }; }; - m_can0: mcan@40528000 { + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + + m_can0: can@40528000 { compatible = "bosch,m_can"; reg = <0x0 0x40528000 0x0 0x400>, <0x0 0x40500000 0x0 0x4400>; @@ -243,7 +258,7 @@ status = "disabled"; }; - m_can1: mcan@40568000 { + m_can1: can@40568000 { compatible = "bosch,m_can"; reg = <0x0 0x40568000 0x0 0x400>, <0x0 0x40540000 0x0 0x4400>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 3093ef6b9b23..4d7b6155a76b 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -19,23 +19,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - i2c0 = &wkup_i2c0; - i2c1 = &mcu_i2c0; - i2c2 = &main_i2c0; - i2c3 = &main_i2c1; - i2c4 = &main_i2c2; - i2c5 = &main_i2c3; - ethernet0 = &cpsw_port1; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - chosen { }; firmware { diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi index cd43fd11a5c2..5ab434c02ab6 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi @@ -35,7 +35,7 @@ }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso new file mode 100644 index 000000000000..3be92c39ecba --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM. + * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT + * AM654 LCD EVM: https://www.ti.com/tool/TMDSLCD1EVM + * + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + display0 { + compatible = "rocktech,rk101ii01d-ct"; + backlight = <&lcd_bl>; + enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; + port { + lcd_in0: endpoint { + remote-endpoint = <&oldi_out0>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = + <0 32 64 96 128 160 192 224 255>; + default-brightness-level = <8>; + }; +}; + +&dss { + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + oldi_out0: endpoint { + remote-endpoint = <&lcd_in0>; + }; + }; +}; + +&main_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@14 { + compatible = "goodix,gt928"; + reg = <0x14>; + + interrupt-parent = <&pca9554>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + + reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>; + irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 592ab2b54cb3..973a89b04a22 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -13,9 +13,22 @@ compatible = "ti,am654-evm", "ti,am654"; model = "Texas Instruments AM654 Base Board"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &main_i2c0; + i2c3 = &main_i2c1; + i2c4 = &main_i2c2; + ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { @@ -86,7 +99,7 @@ }; }; - evm_12v0: fixedregulator-evm12v0 { + evm_12v0: regulator-0 { /* main supply */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; @@ -96,7 +109,7 @@ regulator-boot-on; }; - vcc3v3_io: fixedregulator-vcc3v3io { + vcc3v3_io: regulator-1 { /* Output of TPS54334 */ compatible = "regulator-fixed"; regulator-name = "vcc3v3_io"; @@ -107,7 +120,7 @@ vin-supply = <&evm_12v0>; }; - vdd_mmc1_sd: fixedregulator-sd { + vdd_mmc1_sd: regulator-2 { compatible = "regulator-fixed"; regulator-name = "vdd_mmc1_sd"; regulator-min-microvolt = <3300000>; @@ -117,24 +130,53 @@ vin-supply = <&vcc3v3_io>; gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; }; + + vtt_supply: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + pinctrl-names = "default"; + pinctrl-0 = <&ddr_vtt_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_io>; + gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; + }; }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */ + AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */ + AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + >; + }; + + ddr_vtt_pins_default: ddr-vtt-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; - push_button_pins_default: push-button-pins-default { + push_button_pins_default: push-button-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ @@ -156,7 +198,16 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ @@ -173,16 +224,23 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; + + mcu_i2c0_pins_default: mcu-i2c0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */ + >; + }; }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ @@ -191,14 +249,14 @@ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ >; }; - main_spi0_pins_default: main-spi0-pins-default { + main_spi0_pins_default: main-spi0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ @@ -207,7 +265,7 @@ >; }; - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ @@ -224,7 +282,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -237,7 +295,7 @@ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; @@ -245,21 +303,21 @@ }; &main_pmx1 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - ecap0_pins_default: ecap0-pins-default { + ecap0_pins_default: ecap0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ >; @@ -269,11 +327,14 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { @@ -289,6 +350,25 @@ pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; + eeprom@50 { + /* AT24CM01 */ + compatible = "atmel,24c1024"; + reg = <0x50>; + }; + + vdd_mpu: regulator@60 { + compatible = "ti,tps62363"; + reg = <0x60>; + regulator-name = "VDD_MPU"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-always-on; + regulator-boot-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-vout-discharge; + }; + pca9554: gpio@39 { compatible = "nxp,pca9554"; reg = <0x39>; @@ -305,7 +385,9 @@ &mcu_i2c0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; }; &main_i2c0 { @@ -438,13 +520,13 @@ &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; &ospi0 { @@ -462,6 +544,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "ospi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "ospi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi index 4cc329b271ac..888567b921f0 100644 --- a/arch/arm64/boot/dts/ti/k3-am654.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -113,6 +113,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; thermal_zones: thermal-zones { diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi index 0f67e1ec0fb8..be55494b1f3f 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -22,7 +22,7 @@ }; &main_pmx0 { - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index 9400e35882a6..cbe44634914f 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -27,7 +27,7 @@ }; &main_pmx0 { - main_m2_enable_pins_default: main-m2-enable-pins-default { + main_m2_enable_pins_default: main-m2-enable-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ >; @@ -39,7 +39,7 @@ >; }; - main_pmx0_m2_config_pins_default: main-pmx0-m2-config-pins-default { + main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7) /* (AE13) GPIO1_18 */ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */ @@ -56,7 +56,7 @@ }; &main_pmx1 { - main_pmx1_m2_config_pins_default: main-pmx1-m2-config-pins-default { + main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7) /* (B22) GPIO1_88 */ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ @@ -66,20 +66,18 @@ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_pcie_mux_control - &arduino_io_d4_to_d9_pins_default - >; + pinctrl-0 = + <&main_m2_pcie_mux_control>, + <&arduino_io_d4_to_d9_pins_default>; }; &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_enable_pins_default - &main_pmx0_m2_config_pins_default - &main_pmx1_m2_config_pins_default - &cp2102n_reset_pin_default - >; + pinctrl-0 = + <&main_m2_enable_pins_default>, + <&main_pmx0_m2_config_pins_default>, + <&main_pmx1_m2_config_pins_default>, + <&cp2102n_reset_pin_default>; }; /* diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 27a43a8ecffd..d5889ba3fa46 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -22,6 +22,8 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; mmc1 = &main_sdhci1; can0 = &mcu_mcan0; @@ -122,21 +124,21 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0e0, PIN_INPUT, 0) /* (AH25) I2C0_SCL */ J721S2_IOPAD(0x0e4, PIN_INPUT, 0) /* (AE24) I2C0_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ @@ -148,80 +150,156 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0c4, PIN_INPUT, 7) /* (AB26) ECAP0_IN_APWM_OUT.GPIO0_49 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */ >; }; - main_mcan6_pins_default: main-mcan6-pins-default { + main_mcan6_pins_default: main-mcan6-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x098, PIN_INPUT, 0) /* (V25) MCASP0_AXR10.MCAN6_RX */ J721S2_IOPAD(0x094, PIN_INPUT, 0) /* (AA25) MCASP0_AXR9.MCAN6_TX */ >; }; - main_mcan7_pins_default: main-mcan7-pins-default { + main_mcan7_pins_default: main-mcan7-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0a0, PIN_INPUT, 0) /* (AB25) MCASP0_AXR12.MCAN7_RX */ J721S2_IOPAD(0x09c, PIN_INPUT, 0) /* (T24) MCASP0_AXR11.MCAN7_TX */ >; }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */ + J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */ + >; + }; + + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0a8, PIN_INPUT, 7) /* (U24) MCASP0_AXR14.GPIO0_42 */ + J721S2_IOPAD(0x090, PIN_INPUT, 7) /* (W24) MCASP0_AXR8.GPIO0_36 */ + J721S2_IOPAD(0x0bc, PIN_INPUT, 7) /* (V28) MCASP1_AFSX.GPIO0_47 */ + J721S2_IOPAD(0x06c, PIN_INPUT, 7) /* (V26) MCAN1_TX.GPIO0_27 */ + J721S2_IOPAD(0x004, PIN_INPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */ + J721S2_IOPAD(0x008, PIN_INPUT, 7) /* (AC24) MCAN12_RX.GPIO0_2 */ + J721S2_IOPAD(0x0b8, PIN_INPUT, 7) /* (AA24) MCASP1_ACLKX.GPIO0_46 */ + J721S2_IOPAD(0x00c, PIN_INPUT, 7) /* (AE28) MCAN13_TX.GPIO0_3 */ + J721S2_IOPAD(0x034, PIN_INPUT, 7) /* (AD24) PMIC_WAKE0.GPIO0_13 */ + J721S2_IOPAD(0x0a4, PIN_INPUT, 7) /* (T23) MCASP0_AXR13.GPIO0_41 */ + J721S2_IOPAD(0x0c0, PIN_INPUT, 7) /* (T28) MCASP1_AXR0.GPIO0_48 */ + J721S2_IOPAD(0x0b4, PIN_INPUT, 7) /* (U25) MCASP1_AXR4.GPIO0_45 */ + J721S2_IOPAD(0x0cc, PIN_INPUT, 7) /* (AE27) SPI0_CS0.GPIO0_51 */ + J721S2_IOPAD(0x08c, PIN_INPUT, 7) /* (T25) MCASP0_AXR7.GPIO0_35 */ + >; + }; }; -&wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ - J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ - J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ - J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ - J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ - J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ - J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ - J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ - J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ - J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ - J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ - J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + J721S2_WKUP_IOPAD(0x02C, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00C, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; }; - mcu_mdio_pins_default: mcu-mdio-pins-default { + mcu_mdio_pins_default: mcu-mdio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ - J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; }; - mcu_mcan0_pins_default: mcu-mcan0-pins-default { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0bc, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ - J721S2_WKUP_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ >; }; - mcu_mcan1_pins_default: mcu-mcan1-pins-default { + mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ - J721S2_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/ + J721S2_WKUP_IOPAD(0x06C, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/ >; }; - mcu_i2c1_pins_default: mcu-i2c1-pins-default { + mcu_i2c0_pins_default: mcu-i2c0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ - J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + J721S2_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (G24) MCU_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (J25) MCU_I2C0_SDA */ + >; + }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x078, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J721S2_WKUP_IOPAD(0x07c, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */ + J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */ + J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) MCU_SPI1_D1.WKUP_GPIO0_2 */ + J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) MCU_SPI1_CLK.WKUP_GPIO0_0 */ + J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (D25) MCU_SPI1_CS2.WKUP_GPIO0_15*/ + J721S2_WKUP_IOPAD(0x0B8, PIN_INPUT, 7) /* (G27) WKUP_GPIO0_56 */ + J721S2_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (J26) WKUP_GPIO0_57 */ + J721S2_WKUP_IOPAD(0x11C, PIN_INPUT, 7) /* (J27) WKUP_GPIO0_67 */ + J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */ >; }; }; +&wkup_pmx3 { + mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */ + >; + }; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&rpi_header_gpio0_pins_default>; +}; + &main_gpio2 { status = "disabled"; }; @@ -235,7 +313,8 @@ }; &wkup_gpio0 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_rpi_header_gpio0_pins0_default>, <&mcu_rpi_header_gpio0_pins1_default>; }; &wkup_gpio1 { @@ -244,6 +323,14 @@ &wkup_uart0 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart8 { @@ -271,6 +358,20 @@ }; }; +&main_i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; + clock-frequency = <400000>; +}; + +&mcu_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; +}; + &main_sdhci0 { /* Unused */ status = "disabled"; @@ -287,7 +388,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi index e92431250729..6c9139f73201 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -27,3 +27,25 @@ }; }; }; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */ + >; + }; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index bc49ba534790..d282c2c633c1 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -21,9 +21,14 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; + mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; - i2c0 = &main_i2c0; + i2c0 = &wkup_i2c0; + i2c3 = &main_i2c0; + ethernet0 = &mcu_cpsw_port1; }; memory@80000000 { @@ -105,21 +110,21 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ @@ -132,11 +137,147 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */ >; }; + + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0BC, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */ + J784S4_IOPAD(0x06C, PIN_INPUT, 7) /* (AJ37) MCASP4_AFSX.GPIO0_27 */ + J784S4_IOPAD(0x0B4, PIN_INPUT, 7) /* (AL34) MCASP1_AXR4.GPIO0_45 */ + J784S4_IOPAD(0x0C0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */ + J784S4_IOPAD(0x00C, PIN_INPUT, 7) /* (AF33) MCAN13_TX.GPIO0_3 */ + J784S4_IOPAD(0x0B8, PIN_INPUT, 7) /* (AC34) MCASP1_ACLKX.GPIO0_46 */ + J784S4_IOPAD(0x090, PIN_INPUT, 7) /* (AC35) MCASP0_AXR8.GPIO0_36 */ + J784S4_IOPAD(0x0A8, PIN_INPUT, 7) /* (AF34) MCASP0_AXR14.GPIO0_42 */ + J784S4_IOPAD(0x0A4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */ + J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */ + J784S4_IOPAD(0x0CC, PIN_INPUT, 7) /* (AM37) SPI0_CS0.GPIO0_51 */ + J784S4_IOPAD(0x08C, PIN_INPUT, 7) /* (AE35) MCASP0_AXR7.GPIO0_35 */ + J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ + J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ + >; + }; +}; + +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ + J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_i2c0_pins_default: mcu-i2c0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; + + mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (N34) WKUP_GPIO0_66 */ + J784S4_WKUP_IOPAD(0x05c, PIN_INPUT, 7) /* (J34) WKUP_GPIO0_1 */ + J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */ + J784S4_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (H38) WKUP_GPIO0_0 */ + J784S4_WKUP_IOPAD(0x0b8, PIN_INPUT, 7) /* (M37) WKUP_GPIO0_56 */ + J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */ + J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (K37) WKUP_GPIO0_15 */ + J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */ + J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */ + >; + }; +}; + +&wkup_pmx3 { + mcu_rpi_hdr2_gpio0_pins_default: mcu-rpi-hdr2-gpio0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0, PIN_INPUT, 7) /* (M33) WKUP_GPIO0_49 */ + >; + }; +}; + +&wkup_uart0 { + /* Firmware usage */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; +}; + +&wkup_gpio0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_rpi_hdr1_gpio0_pins_default>, <&mcu_rpi_hdr2_gpio0_pins_default>; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; +}; + +&mcu_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; }; &main_uart8 { @@ -165,6 +306,14 @@ }; }; +&main_sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &main_sdhci1 { /* SD card */ status = "okay"; @@ -177,4 +326,27 @@ &main_gpio0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rpi_header_gpio0_pins_default>; +}; + +&mcu_cpsw { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; +}; + +&davinci_mdio { + mcu_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mcu_cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&mcu_phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 0d39d6b8cc0c..3cf288128c3f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -15,9 +15,18 @@ compatible = "ti,j7200-evm", "ti,j7200"; model = "Texas Instruments J7200 EVM"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial5 = &main_uart3; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; evm_12v0: fixedregulator-evm12v0 { @@ -80,48 +89,88 @@ }; }; +&wkup_pmx0 { + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ + J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ + >; + }; +}; + &wkup_pmx2 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ - J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ - J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ - J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ - J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ - J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ - J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ - J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ - J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ - J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ - J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ + J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + wkup_gpio_pins_default: wkup-gpio-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ - J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ + J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio1-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; }; &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < - J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ - J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ + J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ + J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ + J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0xb8, PIN_INPUT, 0) /* (T18) UART1_RXD */ + J721E_IOPAD(0xbc, PIN_INPUT, 0) /* (T20) UART1_TXD */ + >; + }; + + main_uart3_pins_default: main-uart3-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x60, PIN_INPUT, 11) /* (T15) MCAN8_TX.UART3_CTSn */ + J721E_IOPAD(0x30, PIN_INPUT, 11) /* (Y18) MCAN2_TX.UART3_RXD */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */ J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */ @@ -134,7 +183,7 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; @@ -142,7 +191,7 @@ }; &main_pmx1 { - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; @@ -152,22 +201,30 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; + clock-frequency = <96000000>; }; &main_uart0 { status = "okay"; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; }; &main_uart1 { status = "okay"; /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_uart2 { @@ -175,6 +232,13 @@ status = "reserved"; }; +&main_uart3 { + /* Shared with MCAN Interface */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart3_pins_default>; +}; + &main_gpio2 { status = "disabled"; }; @@ -187,13 +251,18 @@ status = "disabled"; }; +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_gpio_pins_default>; +}; + &wkup_gpio1 { status = "disabled"; }; &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso index 31b932eebc0a..34a0747cbe69 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso +++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso @@ -92,7 +92,7 @@ }; &main_pmx0 { - mdio0_pins_default: mdio0-pins-default { + mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */ J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */ diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index ef352e32f19d..ac62bbc1660d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -392,6 +392,24 @@ }; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x0 0x104200 0x0 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x000001ff>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x0 0x104280 0x0 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -971,6 +989,246 @@ assigned-clock-parents = <&k3_clks 253 5>; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 49 1>; + assigned-clock-parents = <&k3_clks 49 2>; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 50 1>, <&k3_clks 313 0>; + assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 313 1>; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 51 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 51 1>; + assigned-clock-parents = <&k3_clks 51 2>; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 52 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 52 1>, <&k3_clks 314 0>; + assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 314 1>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 53 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 53 1>; + assigned-clock-parents = <&k3_clks 53 2>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 54 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 54 1>, <&k3_clks 315 0>; + assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 315 1>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 55 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 55 1>; + assigned-clock-parents = <&k3_clks 55 2>; + power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 57 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 57 1>, <&k3_clks 316 0>; + assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 316 1>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 58 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 58 1>; + assigned-clock-parents = <&k3_clks 58 2>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 59 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 59 1>, <&k3_clks 317 0>; + assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 317 1>; + power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 60 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 60 1>; + assigned-clock-parents = <&k3_clks 60 2>; + power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 62 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 62 1>, <&k3_clks 318 0>; + assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 318 1>; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 63 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 63 1>; + assigned-clock-parents = <&k3_clks 63 2>; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 64 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 64 1>, <&k3_clks 319 0>; + assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 319 1>; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 65 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 65 1>; + assigned-clock-parents = <&k3_clks 65 2>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 66 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 66 1>, <&k3_clks 320 0>; + assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 320 1>; + power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 67 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 67 1>; + assigned-clock-parents = <&k3_clks 67 2>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 68 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 68 1>, <&k3_clks 321 0>; + assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 321 1>; + power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 69 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 69 1>; + assigned-clock-parents = <&k3_clks 69 2>; + power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 70 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 70 1>, <&k3_clks 322 0>; + assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 322 1>; + power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_r5fss0: r5fss@5c00000 { compatible = "ti,j7200-r5fss"; ti,cluster-mode = <1>; @@ -1010,4 +1268,10 @@ ti,loczrama = <1>; }; }; + + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <656>, <657>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 331b4e482e41..c5e4c41effd1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -34,6 +34,136 @@ }; }; + mcu_timer0: timer@40400000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 1>; + assigned-clock-parents = <&k3_clks 35 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer1: timer@40410000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 71 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 71 1>, <&k3_clks 308 0>; + assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 308 1>; + power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer2: timer@40420000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 72 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 72 1>; + assigned-clock-parents = <&k3_clks 72 2>; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer3: timer@40430000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 73 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 73 1>, <&k3_clks 309 0>; + assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 309 1>; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer4: timer@40440000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 74 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 74 1>; + assigned-clock-parents = <&k3_clks 74 2>; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer5: timer@40450000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 75 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 75 1>, <&k3_clks 310 0>; + assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 310 1>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer6: timer@40460000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 76 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 76 1>; + assigned-clock-parents = <&k3_clks 76 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer7: timer@40470000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 77 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 77 1>, <&k3_clks 311 0>; + assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 311 1>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer8: timer@40480000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 78 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 78 1>; + assigned-clock-parents = <&k3_clks 78 2>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer9: timer@40490000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 79 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 79 1>, <&k3_clks 312 0>; + assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 312 1>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + mcu_conf: syscon@40f00000 { compatible = "syscon", "simple-mfd"; reg = <0x00 0x40f00000 0x00 0x20000>; @@ -53,6 +183,26 @@ reg = <0x00 0x43000014 0x00 0x4>; }; + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x0 0x40f04200 0x0 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000F>; + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x0 0x40f04280 0x0 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000F>; + status = "reserved"; + }; + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -62,7 +212,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - wkup_pmx1: pinctrl@0x4301c038 { + wkup_pmx1: pinctrl@4301c038 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c038 0x00 0x8>; @@ -71,7 +221,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - wkup_pmx2: pinctrl@0x4301c068 { + wkup_pmx2: pinctrl@4301c068 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c068 0x00 0xec>; @@ -80,7 +230,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - wkup_pmx3: pinctrl@0x4301c174 { + wkup_pmx3: pinctrl@4301c174 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c174 0x00 0x20>; @@ -209,6 +359,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -459,4 +624,12 @@ status = "disabled"; /* Used by OP-TEE */ }; }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0x42040000 0x00 0x350>, + <0x00 0x42050000 0x00 0x350>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index fa44ed4c17d5..b37f4f88ece4 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -83,7 +83,7 @@ }; &wkup_pmx0 { - mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { + mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ @@ -101,7 +101,7 @@ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ @@ -118,8 +118,17 @@ }; }; +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */ + J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */ + >; + }; +}; + &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ @@ -140,6 +149,37 @@ flash@0,0 { compatible = "cypress,hyperflash", "cfi-flash"; reg = <0x00 0x00 0x4000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "hbmc.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "hbmc.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "hbmc.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "hbmc.env"; + reg = <0x700000 0x40000>; + }; + + partition@800000 { + label = "hbmc.rootfs"; + reg = <0x800000 0x3800000>; + }; + }; }; }; @@ -174,25 +214,25 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; @@ -214,6 +254,18 @@ }; }; +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; @@ -229,5 +281,46 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi new file mode 100644 index 000000000000..e7e3a643a6f0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + mcu_thermal: mcu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup_crit: wkup-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main_thermal: main-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + c7x_crit: c7x-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index bbe380c72a7e..ef73e6d7e858 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -18,23 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - }; - chosen { }; cpus { @@ -95,6 +78,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; firmware { @@ -128,6 +112,7 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ @@ -170,6 +155,8 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */ }; }; + + #include "k3-j7200-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index 37c24b077b6a..66aac145e753 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -20,6 +20,7 @@ model = "BeagleBoard.org BeagleBone AI-64"; aliases { + serial0 = &wkup_uart0; serial2 = &main_uart0; mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; @@ -304,7 +305,7 @@ }; &main_pmx0 { - led_pins_default: led-pins-default { + led_pins_default: led-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */ J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */ @@ -314,7 +315,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -327,64 +328,64 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; }; - sd_pwr_en_pins_default: sd-pwr-en-pins-default { + sd_pwr_en_pins_default: sd-pwr-en-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */ >; }; - dp0_3v3_en_pins_default:dp0-3v3-en-pins-default { + dp0_3v3_en_pins_default:dp0-3v3-en-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */ >; }; - dp0_pins_default: dp0-pins-default { + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */ J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */ @@ -393,14 +394,14 @@ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_i2c4_pins_default: main-i2c4-pins-default { + main_i2c4_pins_default: main-i2c4-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */ J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */ @@ -409,14 +410,14 @@ >; }; - main_i2c5_pins_default: main-i2c5-pins-default { + main_i2c5_pins_default: main-i2c5-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ >; }; - main_i2c6_pins_default: main-i2c6-pins-default { + main_i2c6_pins_default: main-i2c6-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ @@ -425,21 +426,21 @@ >; }; - csi0_gpio_pins_default: csi0-gpio-pins-default { + csi0_gpio_pins_default: csi0-gpio-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */ J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */ >; }; - csi1_gpio_pins_default: csi1-gpio-pins-default { + csi1_gpio_pins_default: csi1-gpio-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */ J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */ >; }; - pcie1_rst_pins_default: pcie1-rst-pins-default { + pcie1_rst_pins_default: pcie1-rst-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */ >; @@ -447,13 +448,13 @@ }; &wkup_pmx0 { - eeprom_wp_pins_default: eeprom-wp-pins-default { + eeprom_wp_pins_default: eeprom-wp-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */ >; }; - mcu_adc0_pins_default: mcu-adc0-pins-default { + mcu_adc0_pins_default: mcu-adc0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */ J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */ @@ -465,13 +466,13 @@ >; }; - mcu_adc1_pins_default: mcu-adc1-pins-default { + mcu_adc1_pins_default: mcu-adc1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */ >; }; - mikro_bus_pins_default: mikro-bus-pins-default { + mikro_bus_pins_default: mikro-bus-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */ J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */ @@ -494,7 +495,7 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ @@ -511,27 +512,34 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ >; }; - sw_pwr_pins_default: sw-pwr-pins-default { + sw_pwr_pins_default: sw-pwr-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */ >; }; - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; - mcu_usbss1_pins_default: mcu-usbss1-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_usbss1_pins_default: mcu-usbss1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */ >; @@ -541,6 +549,8 @@ &wkup_uart0 { /* Wakeup UART is used by TIFS firmware. */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &main_uart0 { @@ -593,7 +603,7 @@ &main_i2c1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default &csi1_gpio_pins_default>; + pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; }; @@ -623,7 +633,7 @@ &main_i2c5 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&main_i2c5_pins_default &csi0_gpio_pins_default>; + pinctrl-0 = <&main_i2c5_pins_default>; clock-frequency = <400000>; }; @@ -639,12 +649,14 @@ &wkup_i2c0 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default &eeprom_wp_pins_default>; + pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&eeprom_wp_pins_default>; }; }; @@ -680,7 +692,8 @@ &wkup_gpio0 { pinctrl-names = "default"; - pinctrl-0 = <&mcu_adc0_pins_default &mcu_adc1_pins_default &mikro_bus_pins_default>; + pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>, + <&mikro_bus_pins_default>; }; &wkup_gpio1 { @@ -688,6 +701,11 @@ status = "disabled"; }; +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>; +}; + &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ }; @@ -759,7 +777,7 @@ &usbss1 { pinctrl-names = "default"; - pinctrl-0 = <&main_usbss1_pins_default &mcu_usbss1_pins_default>; + pinctrl-0 = <&main_usbss1_pins_default>, <&mcu_usbss1_pins_default>; ti,vbus-divider; }; @@ -872,12 +890,8 @@ }; }; -&pcie0_rc { - /* Unused */ - status = "disabled"; -}; - &pcie1_rc { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pcie1_rst_pins_default>; phys = <&serdes1_pcie_link>; @@ -887,55 +901,12 @@ reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>; }; -&pcie2_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie0_ep { - status = "disabled"; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - -&pcie1_ep { - status = "disabled"; - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; -}; - -&pcie2_ep { - /* Unused */ - status = "disabled"; -}; - -&pcie3_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie3_ep { - /* Unused */ - status = "disabled"; -}; - -&icssg0_mdio { - /* Unused */ - status = "disabled"; -}; - -&icssg1_mdio { - /* Unused */ - status = "disabled"; -}; - &ufs_wrapper { status = "disabled"; }; &mailbox0_cluster0 { + status = "okay"; interrupts = <436>; mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { @@ -950,6 +921,7 @@ }; &mailbox0_cluster1 { + status = "okay"; interrupts = <432>; mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { @@ -964,6 +936,7 @@ }; &mailbox0_cluster2 { + status = "okay"; interrupts = <428>; mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { @@ -978,6 +951,7 @@ }; &mailbox0_cluster3 { + status = "okay"; interrupts = <424>; mbox_c66_0: mbox-c66-0 { @@ -992,6 +966,7 @@ }; &mailbox0_cluster4 { + status = "okay"; interrupts = <420>; mbox_c71_0: mbox-c71-0 { @@ -1001,55 +976,55 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { - mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { - mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 7db0603125aa..c1cbbae76182 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ + * + * Product Link: https://www.ti.com/tool/J721EXCPXEVM */ /dts-v1/; @@ -15,16 +17,27 @@ compatible = "ti,j721e-evm", "ti,j721e"; model = "Texas Instruments J721e EVM"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial6 = &main_uart4; + ethernet0 = &cpsw_port1; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; gpio_keys: gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; - pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; + pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>; sw10: switch-10 { label = "GPIO Key USER1"; @@ -173,13 +186,43 @@ }; &main_pmx0 { - sw10_button_pins_default: sw10-button-pins-default { + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */ + J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */ + J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ + J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ + J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ + >; + }; + + main_uart2_pins_default: main-uart2-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */ + J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */ + >; + }; + + main_uart4_pins_default: main-uart4-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */ + J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */ + >; + }; + + sw10_button_pins_default: sw10-button-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -193,66 +236,66 @@ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; }; - dp0_pins_default: dp0-pins-default { + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ >; }; - main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_i2c6_pins_default: main-i2c6-pins-default { + main_i2c6_pins_default: main-i2c6-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ >; }; - mcasp10_pins_default: mcasp10-pins-default { + mcasp10_pins_default: mcasp10-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ @@ -266,27 +309,27 @@ >; }; - audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default { + audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ >; }; - main_mcan2_pins_default: main-mcan2-pins-default { + main_mcan2_pins_default: main-mcan2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */ J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */ >; }; - main_mcan2_gpio_pins_default: main-mcan2-gpio-pins-default { + main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ >; @@ -294,13 +337,29 @@ }; &wkup_pmx0 { - sw11_button_pins_default: sw11-button-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + sw11_button_pins_default: sw11-button-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ >; }; - mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ @@ -313,7 +372,7 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ @@ -330,70 +389,84 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */ >; }; - mcu_mcan0_pins_default: mcu-mcan0-pins-default { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ >; }; - mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default { + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */ J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */ >; }; - mcu_mcan1_pins_default: mcu-mcan1-pins-default { + mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */ J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */ >; }; - mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default { + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */ >; }; + + wkup_gpio_pins_default: wkup-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */ + >; + }; }; &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; &main_uart1 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_uart2 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins_default>; }; &main_uart4 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart4_pins_default>; }; &main_gpio2 { @@ -420,6 +493,11 @@ status = "disabled"; }; +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_gpio_pins_default>; +}; + &wkup_gpio1 { status = "disabled"; }; @@ -513,6 +591,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "qspi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "qspi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "qspi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "qspi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "qspi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "qspi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "qspi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; }; }; @@ -646,7 +770,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -820,6 +944,7 @@ }; &pcie0_rc { + status = "okay"; reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; phys = <&serdes0_pcie_link>; phy-names = "pcie-phy"; @@ -827,6 +952,7 @@ }; &pcie1_rc { + status = "okay"; reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; phys = <&serdes1_pcie_link>; phy-names = "pcie-phy"; @@ -834,49 +960,13 @@ }; &pcie2_rc { + status = "okay"; reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>; phys = <&serdes2_pcie_link>; phy-names = "pcie-phy"; num-lanes = <2>; }; -&pcie0_ep { - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; - status = "disabled"; -}; - -&pcie1_ep { - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; -}; - -&pcie2_ep { - phys = <&serdes2_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; -}; - -&pcie3_rc { - status = "disabled"; -}; - -&pcie3_ep { - status = "disabled"; -}; - -&icssg0_mdio { - status = "disabled"; -}; - -&icssg1_mdio { - status = "disabled"; -}; - &mcu_mcan0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso index 6ff7b6ad33ed..6f0adf591b98 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso @@ -94,7 +94,7 @@ }; &main_pmx0 { - mdio0_pins_default: mdio0-pins-default { + mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */ J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 10c8a5fb4ee2..2ded1ee1a854 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -548,6 +548,24 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x00 0x104200 0x00 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000007>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x00 0x104280 0x00 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + serdes_wiz0: wiz@5000000 { compatible = "ti,j721e-wiz-16g"; #address-cells = <1>; @@ -814,26 +832,7 @@ ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>, <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie0_ep: pcie-ep@2900000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02900000 0x00 0x1000>, - <0x00 0x02907000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 239 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; pcie1_rc: pcie@2910000 { @@ -862,26 +861,7 @@ ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>, <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie1_ep: pcie-ep@2910000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02910000 0x00 0x1000>, - <0x00 0x02917000 0x00 0x400>, - <0x00 0x0d800000 0x00 0x00800000>, - <0x00 0x18000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 240 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; pcie2_rc: pcie@2920000 { @@ -910,26 +890,7 @@ ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>, <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie2_ep: pcie-ep@2920000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02920000 0x00 0x1000>, - <0x00 0x02927000 0x00 0x400>, - <0x00 0x0e000000 0x00 0x00800000>, - <0x44 0x00000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 241 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; pcie3_rc: pcie@2930000 { @@ -958,28 +919,7 @@ ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>, <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie3_ep: pcie-ep@2930000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02930000 0x00 0x1000>, - <0x00 0x02937000 0x00 0x400>, - <0x00 0x0e800000 0x00 0x00800000>, - <0x44 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 242 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; - #address-cells = <2>; - #size-cells = <2>; + status = "disabled"; }; serdes_wiz4: wiz@5050000 { @@ -1023,6 +963,246 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 49 1>; + assigned-clock-parents = <&k3_clks 49 2>; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 50 1>, <&k3_clks 327 0>; + assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 327 1>; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 51 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 51 1>; + assigned-clock-parents = <&k3_clks 51 2>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 52 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 52 1>, <&k3_clks 328 0>; + assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 328 1>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 53 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 53 1>; + assigned-clock-parents = <&k3_clks 53 2>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 54 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 54 1>, <&k3_clks 329 0>; + assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 329 1>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 55 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 55 1>; + assigned-clock-parents = <&k3_clks 55 2>; + power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 57 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 57 1>, <&k3_clks 330 0>; + assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 330 1>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 58 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 58 1>; + assigned-clock-parents = <&k3_clks 58 2>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 59 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 59 1>, <&k3_clks 331 0>; + assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 331 1>; + power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 60 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 60 1>; + assigned-clock-parents = <&k3_clks 60 2>; + power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 62 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 62 1>, <&k3_clks 332 0>; + assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 332 1>; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 63 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 63 1>; + assigned-clock-parents = <&k3_clks 63 2>; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 64 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 64 1>, <&k3_clks 333 0>; + assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 333 1>; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 65 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 65 1>; + assigned-clock-parents = <&k3_clks 65 2>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 66 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 66 1>, <&k3_clks 334 0>; + assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 334 1>; + power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 67 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 67 1>; + assigned-clock-parents = <&k3_clks 67 2>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 68 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 68 1>, <&k3_clks 335 0>; + assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 335 1>; + power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 69 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 69 1>; + assigned-clock-parents = <&k3_clks 69 2>; + power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 70 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 70 1>, <&k3_clks 336 0>; + assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 336 1>; + power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -1287,8 +1467,8 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-ddr-1_8v; - ti,otap-del-sel-legacy = <0xf>; - ti,otap-del-sel-mmc-hs = <0xf>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x5>; ti,otap-del-sel-hs200 = <0x6>; ti,otap-del-sel-hs400 = <0x0>; @@ -1309,11 +1489,12 @@ assigned-clocks = <&k3_clks 92 0>; assigned-clock-parents = <&k3_clks 92 1>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; ti,otap-del-sel-ddr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; ti,itap-del-sel-legacy = <0x0>; ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; @@ -1335,11 +1516,12 @@ assigned-clocks = <&k3_clks 93 0>; assigned-clock-parents = <&k3_clks 93 1>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; ti,otap-del-sel-ddr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; ti,itap-del-sel-legacy = <0x0>; ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; @@ -2091,6 +2273,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; @@ -2232,6 +2415,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; @@ -2532,4 +2716,10 @@ clocks = <&k3_clks 273 1>; status = "disabled"; }; + + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 24e8125db8c4..ea5b9e104491 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -62,6 +62,28 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04200 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04280 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; @@ -70,6 +92,145 @@ #size-cells = <1>; }; + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 1>; + assigned-clock-parents = <&k3_clks 35 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 71 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 71 1>, <&k3_clks 322 0>; + assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 322 1>; + power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 72 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 72 1>; + assigned-clock-parents = <&k3_clks 72 2>; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 73 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 73 1>, <&k3_clks 323 0>; + assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 323 1>; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer4: timer@40440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 74 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 74 1>; + assigned-clock-parents = <&k3_clks 74 2>; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer5: timer@40450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 75 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 75 1>, <&k3_clks 324 0>; + assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 324 1>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer6: timer@40460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 76 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 76 1>; + assigned-clock-parents = <&k3_clks 76 2>; + power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer7: timer@40470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 77 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 77 1>, <&k3_clks 325 0>; + assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 325 1>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer8: timer@40480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 78 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 78 1>; + assigned-clock-parents = <&k3_clks 78 2>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer9: timer@40490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 79 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 79 1>, <&k3_clks 326 0>; + assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 326 1>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x100>; @@ -181,6 +342,27 @@ #size-cells = <2>; ranges; + hbmc_mux: mux-controller@47000004 { + compatible = "reg-mux"; + reg = <0x00 0x47000004 0x00 0x2>; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* HBMC select */ + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x00 0x47034000 0x00 0x100>, + <0x05 0x00000000 0x01 0x0000000>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 0>; + assigned-clocks = <&k3_clks 102 5>; + assigned-clock-rates = <333333333>; + #address-cells = <2>; + #size-cells = <1>; + mux-controls = <&hbmc_mux 0>; + status = "disabled"; + }; + ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47040000 0x0 0x100>, @@ -296,6 +478,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -458,4 +655,13 @@ clocks = <&k3_clks 276 0>; status = "disabled"; }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x00 0x42040000 0x00 0x350>, + <0x00 0x42050000 0x00 0x350>, + <0x00 0x43000300 0x00 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index f650a7fd66b4..0ee4f38ec8f0 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -16,9 +16,17 @@ compatible = "ti,j721e-sk", "ti,j721e"; model = "Texas Instruments J721E SK"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + ethernet0 = &cpsw_port1; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { @@ -281,7 +289,7 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -294,7 +302,7 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ @@ -303,53 +311,60 @@ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ + J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; }; - dp0_pins_default: dp0-pins-default { + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ >; }; - dp_pwr_en_pins_default: dp-pwr-en-pins-default { + dp_pwr_en_pins_default: dp-pwr-en-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ >; }; - dss_vout0_pins_default: dss-vout0-pins-default { + dss_vout0_pins_default: dss-vout0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ @@ -382,33 +397,33 @@ >; }; - hdmi_hpd_pins_default: hdmi-hpd-pins-default { + hdmi_hpd_pins_default: hdmi-hpd-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ >; }; - hdmi_pdn_pins_default: hdmi-pdn-pins-default { + hdmi_pdn_pins_default: hdmi-pdn-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ >; }; /* Reset for M.2 E Key slot on PCIe0 */ - ekey_reset_pins_default: ekey-reset-pns-pins-default { + ekey_reset_pins_default: ekey-reset-pns-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ >; }; - main_i2c5_pins_default: main-i2c5-pins-default { + main_i2c5_pins_default: main-i2c5-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ >; }; - rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default { + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */ J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */ @@ -436,7 +451,7 @@ >; }; - rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default { + rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ >; @@ -444,7 +459,7 @@ }; &wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ @@ -461,14 +476,14 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ @@ -484,19 +499,35 @@ >; }; - vdd_mmc1_en_pins_default: vdd-mmc1-en-pins-default { + vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ >; }; - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ @@ -504,7 +535,7 @@ }; /* Reset for M.2 M Key slot on PCIe1 */ - mkey_reset_pins_default: mkey-reset-pns-pins-default { + mkey_reset_pins_default: mkey-reset-pns-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ >; @@ -514,11 +545,27 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { @@ -531,7 +578,8 @@ &main_uart1 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_sdhci0 { @@ -569,6 +617,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@7c0000 { + label = "ospi.env.backup"; + reg = <0x7c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; @@ -781,7 +875,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -872,6 +966,7 @@ }; &pcie0_rc { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ekey_reset_pins_default>; reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; @@ -882,6 +977,7 @@ }; &pcie1_rc { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mkey_reset_pins_default>; reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; @@ -891,48 +987,6 @@ num-lanes = <2>; }; -&pcie2_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie0_ep { - status = "disabled"; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - -&pcie1_ep { - status = "disabled"; - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; -}; - -&pcie2_ep { - /* Unused */ - status = "disabled"; -}; - -&pcie3_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie3_ep { - /* Unused */ - status = "disabled"; -}; - -&icssg0_mdio { - status = "disabled"; -}; - -&icssg1_mdio { - status = "disabled"; -}; - &ufs_wrapper { status = "disabled"; }; @@ -1008,55 +1062,55 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { - mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { - mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index e289d5b44356..38ae13cc3aa3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/ + * + * Product Link: https://www.ti.com/tool/J721EXSOMXEVM */ /dts-v1/; @@ -143,14 +145,14 @@ }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ @@ -165,6 +167,51 @@ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ >; }; + + mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CK */ + J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CKn */ + J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CSn0 */ + J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* MCU_HYPERBUS0_CSn1 */ + J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_RESETn */ + J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* MCU_HYPERBUS0_RWDS */ + J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ0 */ + J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ1 */ + J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ2 */ + J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ3 */ + J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ4 */ + J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ5 */ + J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ6 */ + J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ7 */ + >; + }; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; }; &ospi0 { @@ -182,6 +229,104 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "ospi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "ospi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; + }; +}; + +&hbmc { + /* OSPI and HBMC are muxed inside FSS, Bootloader will enable + * appropriate node based on board detection + */ + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; + ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */ + <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */ + + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x00 0x00 0x4000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "hbmc.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "hbmc.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "hbmc.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "hbmc.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "hbmc.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "hbmc.rootfs"; + reg = <0x800000 0x3800000>; + }; + }; }; }; @@ -256,55 +401,55 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { - mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { - mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file mode 100644 index 000000000000..c2523279001b --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + wkup_thermal: wkup-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup_crit: wkup-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + c7x_thermal: c7x-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + c7x_crit: c7x-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + gpu_crit: gpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + r5f_thermal: r5f-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + r5f_crit: r5f-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index b912143b6a11..a200810df54a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -18,25 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - ethernet0 = &cpsw_port1; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - mmc2 = &main_sdhci2; - }; - chosen { }; cpus { @@ -97,6 +78,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; firmware { @@ -131,6 +113,7 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ @@ -184,6 +167,8 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ }; }; + + #include "k3-j721e-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index b4b9edfe2d12..04d4739d7245 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -9,6 +9,9 @@ #include "k3-j721s2-som-p0.dtsi" #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/ti-serdes.h> / { compatible = "ti,j721s2-evm", "ti,j721s2"; @@ -16,7 +19,6 @@ chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000"; }; aliases { @@ -110,7 +112,7 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */ J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */ @@ -119,14 +121,14 @@ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x064, PIN_INPUT_PULLUP, 13) /* (W28) MCAN0_TX.I2C3_SCL */ J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ @@ -139,88 +141,126 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */ >; }; + + main_usbss0_pins_default: main-usbss0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */ + >; + }; }; -&wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ - J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ - J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ - J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ - J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ - J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ - J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ - J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ - J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ - J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ - J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ - J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; }; - mcu_mdio_pins_default: mcu-mdio-pins-default { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ - J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ >; }; - mcu_mcan0_pins_default: mcu-mcan0-pins-default { + mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0bc, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ - J721S2_WKUP_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /*(C23) WKUP_GPIO0_4.MCU_MCAN1_TX */ >; }; - mcu_mcan1_pins_default: mcu-mcan1-pins-default { + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ - J721S2_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX */ + J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */ + J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */ >; }; - mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default { + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0c0, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */ - J721S2_WKUP_IOPAD(0x0a8, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */ + J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ >; }; - mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default { + mcu_adc0_pins_default: mcu-adc0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ + J721S2_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */ + J721S2_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */ + J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */ + J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */ + J721S2_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */ + J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */ + J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */ + J721S2_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */ >; }; - mcu_adc0_pins_default: mcu-adc0-pins-default { + mcu_adc1_pins_default: mcu-adc1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */ - J721S2_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */ - J721S2_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */ - J721S2_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */ - J721S2_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */ - J721S2_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */ - J721S2_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */ - J721S2_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */ + J721S2_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */ + J721S2_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */ + J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */ + J721S2_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */ + J721S2_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */ + J721S2_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */ + J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */ + J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */ >; }; - mcu_adc1_pins_default: mcu-adc1-pins-default { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */ - J721S2_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */ - J721S2_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */ - J721S2_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */ - J721S2_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */ - J721S2_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */ - J721S2_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */ - J721S2_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */ + J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */ + J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */ >; }; }; @@ -243,11 +283,14 @@ &wkup_uart0 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart8 { @@ -305,7 +348,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -322,6 +365,70 @@ phy-handle = <&phy0>; }; +&serdes_ln_ctrl { + idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>, + <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + status = "okay"; + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>; + }; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 1 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; + ti,usb2-only; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&ospi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + }; +}; + +&pcie1_rc { + status = "okay"; + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + &mcu_mcan0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 2dd7865f7654..ed79ab3a3271 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -5,6 +5,17 @@ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy-ti.h> + +/ { + serdes_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -26,6 +37,29 @@ }; }; + scm_conf: syscon@104000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00104000 0x00 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00104000 0x18000>; + + usb_serdes_mux: mux-controller@0 { + compatible = "mmio-mux"; + reg = <0x0 0x4>; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; + + serdes_ln_ctrl: mux-controller@80 { + compatible = "mmio-mux"; + reg = <0x80 0x10>; + #mux-control-cells = <1>; + mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ + <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -72,6 +106,24 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x00 0x104200 0x00 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000007>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x00 0x104280 0x00 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + main_crypto: crypto@4e00000 { compatible = "ti,j721e-sa2ul"; reg = <0x00 0x04e00000 0x00 0x1200>; @@ -91,6 +143,246 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 63 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 63 1>; + assigned-clock-parents = <&k3_clks 63 2>; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 64 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 64 1>; + assigned-clock-parents = <&k3_clks 64 2>; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 65 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 65 1>; + assigned-clock-parents = <&k3_clks 65 2>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 66 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 66 1>; + assigned-clock-parents = <&k3_clks 66 2>; + power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 67 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 67 1>; + assigned-clock-parents = <&k3_clks 67 2>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 68 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 68 1>; + assigned-clock-parents = <&k3_clks 68 2>; + power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 69 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 69 1>; + assigned-clock-parents = <&k3_clks 69 2>; + power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 70 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 70 1>; + assigned-clock-parents = <&k3_clks 70 2>; + power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 71 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 71 1>; + assigned-clock-parents = <&k3_clks 71 2>; + power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 72 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 72 1>; + assigned-clock-parents = <&k3_clks 72 2>; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 73 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 73 1>; + assigned-clock-parents = <&k3_clks 73 2>; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 74 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 74 1>; + assigned-clock-parents = <&k3_clks 74 2>; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 75 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 75 1>; + assigned-clock-parents = <&k3_clks 75 2>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 76 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 76 1>; + assigned-clock-parents = <&k3_clks 76 2>; + power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 77 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 77 1>; + assigned-clock-parents = <&k3_clks 77 2>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 78 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 78 1>; + assigned-clock-parents = <&k3_clks 78 2>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 79 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 79 1>; + assigned-clock-parents = <&k3_clks 79 2>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 80 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 80 1>; + assigned-clock-parents = <&k3_clks 80 2>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 81 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 81 1>; + assigned-clock-parents = <&k3_clks 81 2>; + power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 82 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 82 1>; + assigned-clock-parents = <&k3_clks 82 2>; + power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x200>; @@ -738,6 +1030,8 @@ reg-names = "cpts"; clocks = <&k3_clks 226 5>; clock-names = "cpts"; + assigned-clocks = <&k3_clks 226 5>; /* NAVSS0_CPTS_0_RCLK */ + assigned-clock-parents = <&k3_clks 226 7>; /* MAIN_0_HSDIVOUT6_CLK */ interrupts-extended = <&main_navss_intr 391>; interrupt-names = "cpts"; ti,cpts-periodic-outputs = <6>; @@ -745,6 +1039,117 @@ }; }; + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x04104000 0x00 0x100>; + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 360 17>; + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + + status = "disabled"; /* Needs pinmux */ + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x06000000 0x00 0x10000>, + <0x00 0x06010000 0x00 0x10000>, + <0x00 0x06020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + serdes_wiz0: wiz@5060000 { + compatible = "ti,j721s2-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x5060000 0x0 0x5060000 0x10000>; + + assigned-clocks = <&k3_clks 365 3>; + assigned-clock-parents = <&k3_clks 365 7>; + + serdes0: serdes@5060000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05060000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 365 3>, + <&k3_clks 365 3>, + <&k3_clks 365 3>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + status = "disabled"; /* Needs lane config */ + }; + }; + + pcie1_rc: pcie@2910000 { + compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x800000>, + <0x00 0x18000000 0x00 0x1000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&scm_conf 0x074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 41>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb013>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */ + <0 0 0 2 &pcie1_intc 0>, /* INT B */ + <0 0 0 3 &pcie1_intc 0>, /* INT C */ + <0 0 0 4 &pcie1_intc 0>; /* INT D */ + + status = "disabled"; /* Needs gpio and serdes info */ + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index a353705a7463..e7dd947a1814 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -39,6 +39,21 @@ reg = <0x00 0x43000014 0x00 0x4>; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; @@ -50,12 +65,61 @@ wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x4301c000 0x00 0x178>; + reg = <0x00 0x4301c000 0x00 0x034>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; + wkup_pmx1: pinctrl@4301c038 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c038 0x00 0x02C>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx2: pinctrl@4301c068 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c068 0x00 0x120>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx3: pinctrl@4301c190 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c190 0x00 0x004>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04200 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04280 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; reg = <0x00 0x42200000 0x00 0x400>; @@ -83,6 +147,146 @@ }; + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 1>; + assigned-clock-parents = <&k3_clks 35 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 83 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 83 1>; + assigned-clock-parents = <&k3_clks 83 2>; + power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 84 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 84 1>; + assigned-clock-parents = <&k3_clks 84 2>; + power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 85 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 85 1>; + assigned-clock-parents = <&k3_clks 85 2>; + power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer4: timer@40440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 86 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 86 1>; + assigned-clock-parents = <&k3_clks 86 2>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer5: timer@40450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 87 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 87 1>; + assigned-clock-parents = <&k3_clks 87 2>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer6: timer@40460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 88 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 88 1>; + assigned-clock-parents = <&k3_clks 88 2>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer7: timer@40470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 89 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 89 1>; + assigned-clock-parents = <&k3_clks 89 2>; + power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer8: timer@40480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 90 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 90 1>; + assigned-clock-parents = <&k3_clks 90 2>; + power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer9: timer@40490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 91 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 91 1>; + assigned-clock-parents = <&k3_clks 91 2>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x200>; @@ -280,6 +484,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x2a480000 0x00 0x80000>, + <0x00 0x2a380000 0x00 0x80000>, + <0x00 0x2a400000 0x00 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -333,6 +552,8 @@ reg = <0x0 0x3d000 0x0 0x400>; clocks = <&k3_clks 29 3>; clock-names = "cpts"; + assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */ + assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cpts"; ti,cpts-ext-ts-inputs = <4>; @@ -379,4 +600,56 @@ compatible = "ti,am3359-adc"; }; }; + + fss: bus@47000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47040000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 109 5>; + assigned-clocks = <&k3_clks 109 5>; + assigned-clock-parents = <&k3_clks 109 7>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* Needs pinmux */ + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47050000 0x00 0x100>, + <0x07 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 110 5>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* Needs pinmux */ + }; + }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0x42040000 0x0 0x350>, + <0x00 0x42050000 0x0 0x350>; + power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 6930efff8a5a..d57dd43da0ef 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -39,15 +39,46 @@ }; }; +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */ + J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */ + J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */ + >; + }; +}; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */ + >; + }; +}; + &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ >; }; - main_mcan16_pins_default: main-mcan16-pins-default { + main_mcan16_pins_default: main-mcan16-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ @@ -55,6 +86,19 @@ }; }; +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + &main_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -79,3 +123,22 @@ pinctrl-names = "default"; phys = <&transceiver0>; }; + +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi new file mode 100644 index 000000000000..f7b1a15b8fa0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +wkup0_thermal: wkup0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup0_crit: wkup0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +wkup1_thermal: wkup1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + wkup1_crit: wkup1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main3_thermal: main3-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 5>; + + trips { + main3_crit: main3-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main4_thermal: main4-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 6>; + + trips { + main4_crit: main4-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 376924726f1f..1f636acd4eee 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721S2 SoC Family * - * TRM (SPRUJ28 – NOVEMBER 2021) : http://www.ti.com/lit/pdf/spruj28 + * TRM (SPRUJ28 NOVEMBER 2021): https://www.ti.com/lit/pdf/spruj28 * * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ * @@ -81,6 +81,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; firmware { @@ -163,6 +164,10 @@ }; }; + + thermal_zones: thermal-zones { + #include "k3-j721s2-thermal.dtsi" + }; }; /* Now include peripherals from each bus segment */ diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index f33815953e77..430b8a2c5df5 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -20,10 +20,13 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; - i2c0 = &main_i2c0; + i2c0 = &wkup_i2c0; + i2c3 = &main_i2c0; }; memory@80000000 { @@ -42,6 +45,150 @@ reg = <0x00 0x9e800000 0x00 0x01800000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core0_memory_region: r5f-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core1_memory_region: r5f-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a9000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a9100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9100000 0x00 0xf00000>; + no-map; + }; + + c71_2_dma_memory_region: c71-dma-memory@aa000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa000000 0x00 0x100000>; + no-map; + }; + + c71_2_memory_region: c71-memory@aa100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa100000 0x00 0xf00000>; + no-map; + }; + + c71_3_dma_memory_region: c71-dma-memory@ab000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab000000 0x00 0x100000>; + no-map; + }; + + c71_3_memory_region: c71-memory@ab100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab100000 0x00 0xf00000>; + no-map; + }; }; evm_12v0: regulator-evm12v0 { @@ -105,7 +252,7 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */ J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */ @@ -114,14 +261,14 @@ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ @@ -134,45 +281,280 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ >; }; }; +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ + J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; + + mcu_adc0_pins_default: mcu-adc0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */ + J784S4_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */ + J784S4_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */ + J784S4_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */ + J784S4_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */ + J784S4_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */ + J784S4_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */ + J784S4_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */ + >; + }; + + mcu_adc1_pins_default: mcu-adc1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */ + J784S4_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */ + J784S4_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */ + J784S4_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */ + J784S4_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */ + J784S4_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */ + J784S4_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */ + J784S4_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */ + >; + }; +}; + &wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ - J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ - J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ - J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ - J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ - J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ - J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ - J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ - J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ - J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ - J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ - J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ + J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ + J784S4_WKUP_IOPAD(0x03c, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_CSn3.MCU_OSPI0_ECC_FAIL */ + J784S4_WKUP_IOPAD(0x038, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_CSn2.MCU_OSPI0_RESET_OUT0 */ >; }; - mcu_mdio_pins_default: mcu-mdio-pins-default { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ - J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + J784S4_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */ + J784S4_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */ + J784S4_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */ + J784S4_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */ + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */ + J784S4_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */ + J784S4_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */ >; }; }; +&wkup_uart0 { + /* Firmware usage */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; +}; + &main_uart8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart8_pins_default>; }; +&fss { + status = "okay"; +}; + +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + +&ospi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "qspi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "qspi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "qspi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "qspi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "qspi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "qspi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + + }; +}; + &main_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -253,3 +635,195 @@ phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; }; + +&mailbox0_cluster0 { + status = "okay"; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + interrupts = <428>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + status = "okay"; + interrupts = <424>; + + mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + interrupts = <420>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "okay"; + interrupts = <416>; + + mbox_c71_2: mbox-c71-2 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_3: mbox-c71-3 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mcu_r5fss0_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&main_r5fss2_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>; + memory-region = <&main_r5fss2_core0_dma_memory_region>, + <&main_r5fss2_core0_memory_region>; +}; + +&main_r5fss2_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>; + memory-region = <&main_r5fss2_core1_dma_memory_region>, + <&main_r5fss2_core1_memory_region>; +}; + +&c71_0 { + status = "okay"; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; + +&c71_1 { + status = "okay"; + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; +}; + +&c71_2 { + status = "okay"; + mboxes = <&mailbox0_cluster5 &mbox_c71_2>; + memory-region = <&c71_2_dma_memory_region>, + <&c71_2_memory_region>; +}; + +&c71_3 { + status = "okay"; + mboxes = <&mailbox0_cluster5 &mbox_c71_3>; + memory-region = <&c71_3_dma_memory_region>, + <&c71_3_memory_region>; +}; + +&tscadc0 { + pinctrl-0 = <&mcu_adc0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + pinctrl-0 = <&mcu_adc1_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index e9169eb358c1..2ea0adae6832 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -72,6 +72,24 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x00 0x104200 0x00 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000007>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x00 0x104280 0x00 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + main_crypto: crypto@4e00000 { compatible = "ti,j721e-sa2ul"; reg = <0x00 0x4e00000 0x00 0x1200>; @@ -91,6 +109,246 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 97 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 97 2>; + assigned-clock-parents = <&k3_clks 97 3>; + power-domains = <&k3_pds 97 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 98 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 98 2>; + assigned-clock-parents = <&k3_clks 98 3>; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 99 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 99 2>; + assigned-clock-parents = <&k3_clks 99 3>; + power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 100 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 100 2>; + assigned-clock-parents = <&k3_clks 100 3>; + power-domains = <&k3_pds 100 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 101 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 101 2>; + assigned-clock-parents = <&k3_clks 101 3>; + power-domains = <&k3_pds 101 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 102 2>; + assigned-clock-parents = <&k3_clks 102 3>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 103 2>; + assigned-clock-parents = <&k3_clks 103 3>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 104 2>; + assigned-clock-parents = <&k3_clks 104 3>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 105 2>; + assigned-clock-parents = <&k3_clks 105 3>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 106 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 106 2>; + assigned-clock-parents = <&k3_clks 106 3>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 107 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 107 2>; + assigned-clock-parents = <&k3_clks 107 3>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 108 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 108 2>; + assigned-clock-parents = <&k3_clks 108 3>; + power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 109 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 109 2>; + assigned-clock-parents = <&k3_clks 109 3>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 110 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 110 2>; + assigned-clock-parents = <&k3_clks 110 3>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 111 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 111 2>; + assigned-clock-parents = <&k3_clks 111 3>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 112 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 112 2>; + assigned-clock-parents = <&k3_clks 112 3>; + power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 113 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 113 2>; + assigned-clock-parents = <&k3_clks 113 3>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 114 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 114 2>; + assigned-clock-parents = <&k3_clks 114 3>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 115 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 115 2>; + assigned-clock-parents = <&k3_clks 115 3>; + power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 116 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 116 2>; + assigned-clock-parents = <&k3_clks 116 3>; + power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x200>; @@ -378,7 +636,6 @@ mmc-hs200-1_8v; mmc-hs400-1_8v; dma-coherent; - no-1-8-v; status = "disabled"; }; @@ -1112,4 +1369,172 @@ clocks = <&k3_clks 383 1>; status = "disabled"; }; + + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5c00000 0x00010000>, + <0x5c10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <339>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 339 1>; + firmware-name = "j784s4-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5d00000 0x00010000>, + <0x5d10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <340>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 340 1>; + firmware-name = "j784s4-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss1: r5fss@5e00000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5e00000 0x00 0x5e00000 0x20000>, + <0x5f00000 0x00 0x5f00000 0x20000>; + power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@5e00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5e00000 0x00010000>, + <0x5e10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <341>; + ti,sci-proc-ids = <0x08 0xff>; + resets = <&k3_reset 341 1>; + firmware-name = "j784s4-main-r5f1_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss1_core1: r5f@5f00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5f00000 0x00010000>, + <0x5f10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <342>; + ti,sci-proc-ids = <0x09 0xff>; + resets = <&k3_reset 342 1>; + firmware-name = "j784s4-main-r5f1_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss2: r5fss@5900000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5900000 0x00 0x5900000 0x20000>, + <0x5a00000 0x00 0x5a00000 0x20000>; + power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss2_core0: r5f@5900000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5900000 0x00010000>, + <0x5910000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <343>; + ti,sci-proc-ids = <0x0a 0xff>; + resets = <&k3_reset 343 1>; + firmware-name = "j784s4-main-r5f2_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss2_core1: r5f@5a00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5a00000 0x00010000>, + <0x5a10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <344>; + ti,sci-proc-ids = <0x0b 0xff>; + resets = <&k3_reset 344 1>; + firmware-name = "j784s4-main-r5f2_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + c71_0: dsp@64800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x64800000 0x00 0x00080000>, + <0x00 0x64e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <30>; + ti,sci-proc-ids = <0x30 0xff>; + resets = <&k3_reset 30 1>; + firmware-name = "j784s4-c71_0-fw"; + }; + + c71_1: dsp@65800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x65800000 0x00 0x00080000>, + <0x00 0x65e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <33>; + ti,sci-proc-ids = <0x31 0xff>; + resets = <&k3_reset 33 1>; + firmware-name = "j784s4-c71_1-fw"; + }; + + c71_2: dsp@66800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x66800000 0x00 0x00080000>, + <0x00 0x66e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <37>; + ti,sci-proc-ids = <0x32 0xff>; + resets = <&k3_reset 37 1>; + firmware-name = "j784s4-c71_2-fw"; + }; + + c71_3: dsp@67800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x67800000 0x00 0x00080000>, + <0x00 0x67e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <40>; + ti,sci-proc-ids = <0x33 0xff>; + resets = <&k3_reset 40 1>; + firmware-name = "j784s4-c71_3-fw"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index f04fcb614cbe..657fb1d72512 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -39,6 +39,21 @@ reg = <0x00 0x43000014 0x00 0x4>; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; @@ -50,7 +65,34 @@ wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x4301c000 0x00 0x178>; + reg = <0x00 0x4301c000 0x00 0x034>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx1: pinctrl@4301c038 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c038 0x00 0x02c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx2: pinctrl@4301c068 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c068 0x00 0x120>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx3: pinctrl@4301c190 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c190 0x00 0x004>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; @@ -68,6 +110,28 @@ ti,interrupt-ranges = <16 928 16>; }; + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04200 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04280 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + mcu_conf: syscon@40f00000 { compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; reg = <0x00 0x40f00000 0x00 0x20000>; @@ -82,6 +146,146 @@ }; }; + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 2>; + assigned-clock-parents = <&k3_clks 35 3>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 117 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 117 2>; + assigned-clock-parents = <&k3_clks 117 3>; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 118 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 118 2>; + assigned-clock-parents = <&k3_clks 118 3>; + power-domains = <&k3_pds 118 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 119 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 119 2>; + assigned-clock-parents = <&k3_clks 119 3>; + power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer4: timer@40440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 120 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 120 2>; + assigned-clock-parents = <&k3_clks 120 3>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer5: timer@40450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 121 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 121 2>; + assigned-clock-parents = <&k3_clks 121 3>; + power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer6: timer@40460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 122 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 122 2>; + assigned-clock-parents = <&k3_clks 122 3>; + power-domains = <&k3_pds 122 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer7: timer@40470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 123 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 123 2>; + assigned-clock-parents = <&k3_clks 123 3>; + power-domains = <&k3_pds 123 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer8: timer@40480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 124 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 124 2>; + assigned-clock-parents = <&k3_clks 124 3>; + power-domains = <&k3_pds 124 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer9: timer@40490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 125 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 125 2>; + assigned-clock-parents = <&k3_clks 125 3>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x200>; @@ -280,6 +484,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x2a480000 0x00 0x80000>, + <0x00 0x2a380000 0x00 0x80000>, + <0x00 0x2a400000 0x00 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -342,4 +561,133 @@ ti,cpts-periodic-outputs = <2>; }; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,j721s2-r5f"; + reg = <0x41000000 0x00010000>, + <0x41010000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <346>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 346 1>; + firmware-name = "j784s4-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,j721s2-r5f"; + reg = <0x41400000 0x00010000>, + <0x41410000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <347>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 347 1>; + firmware-name = "j784s4-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0x42040000 0x00 0x350>, + <0x00 0x42050000 0x00 0x350>; + power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + #thermal-sensor-cells = <1>; + }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40210000 0x00 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + fss: bus@47000000 { + compatible = "simple-bus"; + reg = <0x00 0x47000000 0x00 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47040000 0x00 0x100>, + <0x05 0x0000000 0x01 0x0000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 161 7>; + assigned-clocks = <&k3_clks 161 7>; + assigned-clock-parents = <&k3_clks 161 9>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47050000 0x00 0x100>, + <0x07 0x0000000 0x01 0x0000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 162 7>; + power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi new file mode 100644 index 000000000000..f7b1a15b8fa0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +wkup0_thermal: wkup0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup0_crit: wkup0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +wkup1_thermal: wkup1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + wkup1_crit: wkup1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main3_thermal: main3-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 5>; + + trips { + main3_crit: main3-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main4_thermal: main4-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 6>; + + trips { + main4_crit: main4-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi index 2e03d84da7d2..8b5974d92e33 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J784S4 SoC Family * - * TRM (SPRUJ43 JULY 2022) : http://www.ti.com/lit/zip/spruj52 + * TRM (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52 * * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ * @@ -281,6 +281,10 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ }; }; + + thermal_zones: thermal-zones { + #include "k3-j784s4-thermal.dtsi" + }; }; /* Now include peripherals from each bus segment */ diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 4e159540d031..5e40c0b4fa0a 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -2,7 +2,6 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb -dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb @@ -17,16 +16,17 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu1275-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb -sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo -sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo -smk-k26-revA-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo -smk-k26-revA-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo +zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo +zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo -dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revA.dtb -dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revB.dtb -dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revA.dtb -dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revB.dtb +zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo +zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo +zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo +zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts index 88aa06fa78a8..4c1bd69e7553 100644 --- a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts +++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2018, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index 3e9979ab60bb..f04716841a0c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -2,38 +2,44 @@ /* * Clock specification for Xilinx ZynqMP * - * (C) Copyright 2017 - 2021, Xilinx, Inc. + * (C) Copyright 2017 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include <dt-bindings/clock/xlnx-zynqmp-clk.h> / { pss_ref_clk: pss_ref_clk { + bootph-all; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <33333333>; }; video_clk: video_clk { + bootph-all; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; pss_alt_ref_clk: pss_alt_ref_clk { + bootph-all; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; gt_crx_ref_clk: gt_crx_ref_clk { + bootph-all; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <108000000>; }; aux_ref_clk: aux_ref_clk { + bootph-all; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -42,6 +48,7 @@ &zynqmp_firmware { zynqmp_clk: clock-controller { + bootph-all; #clock-cells = <1>; compatible = "xlnx,zynqmp-clk"; clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, @@ -95,6 +102,10 @@ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; +&gpu { + clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>; +}; + &lpd_dma_chan1 { clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; @@ -181,10 +192,12 @@ &sdhci0 { clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>; + assigned-clocks = <&zynqmp_clk SDIO0_REF>; }; &sdhci1 { clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>; + assigned-clocks = <&zynqmp_clk SDIO1_REF>; }; &spi0 { @@ -241,10 +254,14 @@ &zynqmp_dpdma { clocks = <&zynqmp_clk DPDMA_REF>; + assigned-clocks = <&zynqmp_clk DPDMA_REF>; /* apll */ }; &zynqmp_dpsub { clocks = <&zynqmp_clk TOPSW_LSBUS>, <&zynqmp_clk DP_AUDIO_REF>, <&zynqmp_clk DP_VIDEO_REF>; + assigned-clocks = <&zynqmp_clk DP_STC_REF>, + <&zynqmp_clk DP_AUDIO_REF>, + <&zynqmp_clk DP_VIDEO_REF>; /* rpll, rpll, vpll */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso index b610e65e0cdf..603839c82599 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso @@ -2,14 +2,15 @@ /* * dts file for KV260 revA Carrier Card * - * (C) Copyright 2020 - 2021, Xilinx, Inc. + * (C) Copyright 2020 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * * SD level shifter: - * "A" – A01 board un-modified (NXP) - * "Y" – A01 board modified with legacy interposer (Nexperia) - * "Z" – A01 board modified with Diode interposer + * "A" - A01 board un-modified (NXP) + * "Y" - A01 board modified with legacy interposer (Nexperia) + * "Z" - A01 board modified with Diode interposer * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include <dt-bindings/gpio/gpio.h> @@ -95,13 +96,15 @@ }; &zynqmp_dpsub { - status = "disabled"; + status = "okay"; phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; }; &zynqmp_dpdma { status = "okay"; + assigned-clock-rates = <600000000>; }; &usb0 { @@ -132,6 +135,8 @@ no-1-8-v; disable-wp; xlnx,mio-bank = <1>; + assigned-clock-rates = <187498123>; + bus-width = <4>; }; &gem3 { /* required by spec */ @@ -144,16 +149,18 @@ mdio: mdio { #address-cells = <1>; #size-cells = <0>; - reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; phy0: ethernet-phy@1 { #phy-cells = <1>; reg = <1>; + compatible = "ethernet-phy-id2000.a231"; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; }; }; }; @@ -259,19 +266,22 @@ pinctrl_usb0_default: usb0-default { conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; mux { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index a52dafbfd59e..a91d09e7da4b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -2,9 +2,10 @@ /* * dts file for KV260 revA Carrier Card * - * (C) Copyright 2020 - 2021, Xilinx, Inc. + * (C) Copyright 2020 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include <dt-bindings/gpio/gpio.h> @@ -76,13 +77,15 @@ }; &zynqmp_dpsub { - status = "disabled"; + status = "okay"; phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; }; &zynqmp_dpdma { status = "okay"; + assigned-clock-rates = <600000000>; }; &usb0 { @@ -115,6 +118,8 @@ clk-phase-sd-hs = <126>, <60>; clk-phase-uhs-sdr25 = <120>, <60>; clk-phase-uhs-ddr50 = <126>, <48>; + assigned-clock-rates = <187498123>; + bus-width = <4>; }; &gem3 { /* required by spec */ @@ -127,16 +132,18 @@ mdio: mdio { #address-cells = <1>; #size-cells = <0>; - reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; phy0: ethernet-phy@1 { #phy-cells = <1>; reg = <1>; + compatible = "ethernet-phy-id2000.a231"; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; }; }; }; @@ -242,19 +249,22 @@ pinctrl_usb0_default: usb0-default { conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; mux { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts index 20e83ca47b5d..dfd1a18f5a10 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2020 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -14,6 +14,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> / { model = "ZynqMP SM-K26 Rev1/B/A"; @@ -55,6 +56,9 @@ key-fwuen { label = "fwuen"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + autorepeat; }; }; @@ -72,109 +76,158 @@ default-state = "on"; }; }; + + ams { + compatible = "iio-hwmon"; + io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, + <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, + <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>, + <&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>, + <&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>, + <&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>, + <&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>, + <&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>, + <&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>, + <&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>; + }; +}; + +&modepin_gpio { + label = "modepin"; }; &uart1 { /* MIO36/MIO37 */ status = "okay"; }; +&pinctrl0 { + status = "okay"; + pinctrl_sdhci0_default: sdhci0-default { + conf { + groups = "sdio0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + }; +}; + &qspi { /* MIO 0-5 - U143 */ status = "okay"; - flash@0 { /* MT25QU512A */ + spi_flash: flash@0 { /* MT25QU512A */ compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ #address-cells = <1>; #size-cells = <1>; reg = <0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <40000000>; /* 40MHz */ - partition@0 { - label = "Image Selector"; - reg = <0x0 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@80000 { - label = "Image Selector Golden"; - reg = <0x80000 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@100000 { - label = "Persistent Register"; - reg = <0x100000 0x20000>; /* 128KB */ - }; - partition@120000 { - label = "Persistent Register Backup"; - reg = <0x120000 0x20000>; /* 128KB */ - }; - partition@140000 { - label = "Open_1"; - reg = <0x140000 0xC0000>; /* 768KB */ - }; - partition@200000 { - label = "Image A (FSBL, PMU, ATF, U-Boot)"; - reg = <0x200000 0xD00000>; /* 13MB */ - }; - partition@f00000 { - label = "ImgSel Image A Catch"; - reg = <0xF00000 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@f80000 { - label = "Image B (FSBL, PMU, ATF, U-Boot)"; - reg = <0xF80000 0xD00000>; /* 13MB */ - }; - partition@1c80000 { - label = "ImgSel Image B Catch"; - reg = <0x1C80000 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@1d00000 { - label = "Open_2"; - reg = <0x1D00000 0x100000>; /* 1MB */ - }; - partition@1e00000 { - label = "Recovery Image"; - reg = <0x1E00000 0x200000>; /* 2MB */ - read-only; - lock; - }; - partition@2000000 { - label = "Recovery Image Backup"; - reg = <0x2000000 0x200000>; /* 2MB */ - read-only; - lock; - }; - partition@2200000 { - label = "U-Boot storage variables"; - reg = <0x2200000 0x20000>; /* 128KB */ - }; - partition@2220000 { - label = "U-Boot storage variables backup"; - reg = <0x2220000 0x20000>; /* 128KB */ - }; - partition@2240000 { - label = "SHA256"; - reg = <0x2240000 0x10000>; /* 256B but 64KB sector */ - read-only; - lock; - }; - partition@2250000 { - label = "User"; - reg = <0x2250000 0x1db0000>; /* 29.5 MB */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Image Selector"; + reg = <0x0 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@80000 { + label = "Image Selector Golden"; + reg = <0x80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@100000 { + label = "Persistent Register"; + reg = <0x100000 0x20000>; /* 128KB */ + }; + partition@120000 { + label = "Persistent Register Backup"; + reg = <0x120000 0x20000>; /* 128KB */ + }; + partition@140000 { + label = "Open_1"; + reg = <0x140000 0xC0000>; /* 768KB */ + }; + partition@200000 { + label = "Image A (FSBL, PMU, ATF, U-Boot)"; + reg = <0x200000 0xD00000>; /* 13MB */ + }; + partition@f00000 { + label = "ImgSel Image A Catch"; + reg = <0xF00000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@f80000 { + label = "Image B (FSBL, PMU, ATF, U-Boot)"; + reg = <0xF80000 0xD00000>; /* 13MB */ + }; + partition@1c80000 { + label = "ImgSel Image B Catch"; + reg = <0x1C80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@1d00000 { + label = "Open_2"; + reg = <0x1D00000 0x100000>; /* 1MB */ + }; + partition@1e00000 { + label = "Recovery Image"; + reg = <0x1E00000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2000000 { + label = "Recovery Image Backup"; + reg = <0x2000000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2200000 { + label = "U-Boot storage variables"; + reg = <0x2200000 0x20000>; /* 128KB */ + }; + partition@2220000 { + label = "U-Boot storage variables backup"; + reg = <0x2220000 0x20000>; /* 128KB */ + }; + partition@2240000 { + label = "SHA256"; + reg = <0x2240000 0x40000>; /* 256B but 256KB sector */ + read-only; + lock; + }; + partition@2280000 { + label = "Secure OS Storage"; + reg = <0x2280000 0x20000>; /* 128KB */ + }; + partition@22A0000 { + label = "User"; + reg = <0x22A0000 0x1d60000>; /* 29.375 MB */ + }; }; }; }; &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; non-removable; disable-wp; bus-width = <8>; xlnx,mio-bank = <0>; + assigned-clock-rates = <187498123>; }; &spi1 { /* MIO6, 9-11 */ @@ -190,17 +243,20 @@ &i2c1 { status = "okay"; + bootph-all; clock-frequency = <400000>; scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; eeprom: eeprom@50 { /* u46 - also at address 0x58 */ + bootph-all; compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ reg = <0x50>; /* WP pin EE_WP_EN connected to slg7x644092@68 */ }; eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */ + bootph-all; compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ reg = <0x51>; }; @@ -287,3 +343,114 @@ "", "", "", "", "", /* 165 - 169 */ "", "", "", ""; /* 170 - 173 */ }; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&lpd_dma_chan1 { + status = "okay"; +}; + +&lpd_dma_chan2 { + status = "okay"; +}; + +&lpd_dma_chan3 { + status = "okay"; +}; + +&lpd_dma_chan4 { + status = "okay"; +}; + +&lpd_dma_chan5 { + status = "okay"; +}; + +&lpd_dma_chan6 { + status = "okay"; +}; + +&lpd_dma_chan7 { + status = "okay"; +}; + +&lpd_dma_chan8 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&lpd_watchdog { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; + +&cpu_opp_table { + opp00 { + opp-hz = /bits/ 64 <1333333333>; + }; + opp01 { + opp-hz = /bits/ 64 <666666666>; + }; + opp02 { + opp-hz = /bits/ 64 <444444444>; + }; + opp03 { + opp-hz = /bits/ 64 <333333333>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts index c70966c1f344..85b0d1677240 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2020 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include "zynqmp-sm-k26-revA.dts" diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts index f1598527e5ec..04079d1704f1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2017 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -44,7 +44,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts index 04efa1683eaa..3dec57cf18be 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -4,8 +4,8 @@ * * (C) Copyright 2015 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> - * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + * Michal Simek <michal.simek@amd.com> + * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com> */ /dts-v1/; @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index b05be2552826..d9d1de5f313c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2021, Xilinx, Inc. + * (C) Copyright 2015 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -108,6 +109,9 @@ pinctrl-0 = <&pinctrl_gpio_default>; }; +&gpu { + status = "okay"; +}; &i2c1 { status = "okay"; @@ -184,19 +188,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -348,7 +355,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 938b76bd0527..6503f4985f8d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2021, Xilinx, Inc. + * (C) Copyright 2015 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -281,19 +282,22 @@ conf { groups = "usb1_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO64", "MIO65", "MIO67"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", "MIO75"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -485,8 +489,6 @@ &dwc3_1 { status = "okay"; dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; }; &uart0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 381cc682cef9..38b0a312171b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2016 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 05a2b79738af..6636e76545a5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2015 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -152,6 +152,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -169,7 +173,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index ae2d03d98322..b1e933b8a2cd 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -4,8 +4,8 @@ * * (C) Copyright 2015 - 2021, Xilinx, Inc. * - * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> - * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 6948fd40554b..44d1f351bb75 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2021, Xilinx, Inc. + * (C) Copyright 2016 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> * Nathalie Chan King Choy */ @@ -58,6 +59,15 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, + <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, + <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>, + <&xilinx_ams 9>, <&xilinx_ams 10>, + <&xilinx_ams 11>, <&xilinx_ams 12>; + }; + leds { compatible = "gpio-leds"; led-ds2 { @@ -161,6 +171,10 @@ "", "", "", ""; }; +&gpu { + status = "okay"; +}; + &i2c1 { status = "okay"; pinctrl-names = "default", "gpio"; @@ -419,19 +433,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -443,19 +460,22 @@ conf { groups = "usb1_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO64", "MIO65", "MIO67"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", "MIO75"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; }; @@ -541,6 +561,7 @@ pinctrl-0 = <&pinctrl_usb0_default>; phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; + /delete-property/ reset-gpios; }; &dwc3_0 { @@ -556,6 +577,7 @@ pinctrl-0 = <&pinctrl_usb1_default>; phy-names = "usb3-phy"; phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; + reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>; }; &dwc3_1 { @@ -568,6 +590,14 @@ status = "okay"; }; +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + &zynqmp_dpdma { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts index 6647e97edba3..c8f71a1aec89 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2016 - 2018, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include "zynqmp-zcu102-revB.dts" diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts index b6798394fcf4..705369766a55 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts @@ -4,7 +4,7 @@ * * (C) Copyright 2016 - 2020, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include "zynqmp-zcu102-rev1.0.dts" diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 5fd6b70a154a..8767f147cbe3 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2021, Xilinx, Inc. + * (C) Copyright 2015 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -200,13 +201,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@21 { - reg = <21>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; - /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@21 { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <21>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; @@ -216,6 +223,10 @@ pinctrl-0 = <&pinctrl_gpio_default>; }; +&gpu { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; @@ -772,19 +783,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -943,7 +957,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; @@ -1013,6 +1027,18 @@ status = "okay"; }; +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; + &zynqmp_dpdma { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index f7d718ff116b..3c28130909bc 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevB * - * (C) Copyright 2016 - 2021, Xilinx, Inc. + * (C) Copyright 2016 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ #include "zynqmp-zcu102-revA.dts" @@ -16,16 +17,20 @@ &gem3 { phy-handle = <&phyc>; - phyc: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; - /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ + mdio: mdio { + phyc: ethernet-phy@c { + #phy-cells = <0x1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; + /* Cleanup from RevA */ + /delete-node/ ethernet-phy@21; }; - /* Cleanup from RevA */ - /delete-node/ ethernet-phy@21; }; /* Fix collision with u61 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index bd8f20f3223d..e185709c0d84 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2021, Xilinx, Inc. + * (C) Copyright 2017 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -109,12 +110,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; @@ -122,6 +130,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -398,20 +410,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; - drive-strength = <12>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; }; @@ -430,7 +444,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; @@ -497,6 +511,18 @@ status = "okay"; }; +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; + &zynqmp_dpdma { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts index 96feaad30166..7fceebd1815c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2021, Xilinx, Inc. + * (C) Copyright 2017 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -114,12 +115,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; @@ -127,6 +135,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -410,20 +422,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; - drive-strength = <12>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; }; @@ -442,7 +456,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; @@ -509,6 +523,18 @@ status = "okay"; }; +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; + &zynqmp_dpdma { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 24a252317150..27b2416cb6d8 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016 - 2021, Xilinx, Inc. + * (C) Copyright 2016 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -212,12 +213,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + reg = <0xc>; + compatible = "ethernet-phy-id2000.a231"; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; @@ -227,6 +235,10 @@ pinctrl-0 = <&pinctrl_gpio_default>; }; +&gpu { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; @@ -782,19 +794,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -949,7 +964,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index d685d8fbc36a..6224365826d8 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2021, Xilinx, Inc. + * (C) Copyright 2017 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -172,12 +173,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>; + }; }; }; @@ -187,6 +195,10 @@ pinctrl-0 = <&pinctrl_gpio_default>; }; +&gpu { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; @@ -648,19 +660,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -779,7 +794,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts index e971ba8c1418..c406017b0348 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts @@ -4,8 +4,8 @@ * * (C) Copyright 2017 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> - * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + * Michal Simek <michal.simek@amd.com> + * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com> */ /dts-v1/; @@ -14,8 +14,8 @@ #include "zynqmp-clk-ccf.dtsi" / { - model = "ZynqMP ZC1275 RevA"; - compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + model = "ZynqMP ZCU1275 RevA"; + compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", "xlnx,zynqmp"; aliases { serial0 = &uart0; @@ -47,7 +47,7 @@ flash@0 { compatible = "m25p80", "jedec,spi-nor"; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 153db59dc4b3..02cfcc716936 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -4,7 +4,7 @@ * * (C) Copyright 2014 - 2021, Xilinx, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -118,6 +118,7 @@ }; zynqmp_ipi: zynqmp_ipi { + bootph-all; compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; interrupts = <0 35 4>; @@ -126,7 +127,8 @@ #size-cells = <2>; ranges; - ipi_mailbox_pmu1: mailbox@ff990400 { + ipi_mailbox_pmu1: mailbox@ff9905c0 { + bootph-all; reg = <0x0 0xff9905c0 0x0 0x20>, <0x0 0xff9905e0 0x0 0x20>, <0x0 0xff990e80 0x0 0x20>, @@ -143,6 +145,7 @@ dcc: dcc { compatible = "arm,dcc"; status = "disabled"; + bootph-all; }; pmu { @@ -152,6 +155,10 @@ <0 144 4>, <0 145 4>, <0 146 4>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; }; psci { @@ -164,8 +171,10 @@ compatible = "xlnx,zynqmp-firmware"; #power-domain-cells = <1>; method = "smc"; + bootph-all; zynqmp_power: zynqmp-power { + bootph-all; compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; interrupts = <0 35 4>; @@ -245,6 +254,7 @@ amba: axi { compatible = "simple-bus"; + bootph-all; #address-cells = <2>; #size-cells = <2>; ranges; @@ -400,7 +410,6 @@ gic: interrupt-controller@f9010000 { compatible = "arm,gic-400"; - #address-cells = <0>; #interrupt-cells = <3>; reg = <0x0 0xf9010000 0x0 0x10000>, <0x0 0xf9020000 0x0 0x20000>, @@ -411,6 +420,18 @@ interrupts = <1 9 0xf04>; }; + gpu: gpu@fd4b0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-mali", "arm,mali-400"; + reg = <0x0 0xfd4b0000 0x0 0x10000>; + interrupt-parent = <&gic>; + interrupts = <0 132 4>, <0 132 4>, <0 132 4>, + <0 132 4>, <0 132 4>, <0 132 4>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1"; + clock-names = "bus", "core"; + power-domains = <&zynqmp_firmware PD_GPU>; + }; + /* LPDDMA default allows only secured access. inorder to enable * These dma channels, Users should ensure that these dma * Channels are allowed for non secure access. @@ -602,7 +623,6 @@ gpio: gpio@ff0a0000 { compatible = "xlnx,zynqmp-gpio-1.0"; status = "disabled"; - #address-cells = <0>; #gpio-cells = <0x2>; gpio-controller; interrupt-parent = <&gic>; @@ -674,6 +694,7 @@ }; qspi: spi@ff0f0000 { + bootph-all; compatible = "xlnx,zynqmp-qspi-1.0"; status = "disabled"; clock-names = "ref_clk", "pclk"; @@ -720,6 +741,7 @@ }; sdhci0: mmc@ff160000 { + bootph-all; compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; @@ -730,9 +752,11 @@ #clock-cells = <1>; clock-output-names = "clk_out_sd0", "clk_in_sd0"; power-domains = <&zynqmp_firmware PD_SD_0>; + resets = <&zynqmp_reset ZYNQMP_RESET_SDIO0>; }; sdhci1: mmc@ff170000 { + bootph-all; compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; @@ -743,6 +767,7 @@ #clock-cells = <1>; clock-output-names = "clk_out_sd1", "clk_in_sd1"; power-domains = <&zynqmp_firmware PD_SD_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_SDIO1>; }; smmu: iommu@fd800000 { @@ -824,6 +849,7 @@ }; uart0: serial@ff000000 { + bootph-all; compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; @@ -834,6 +860,7 @@ }; uart1: serial@ff010000 { + bootph-all; compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; @@ -928,13 +955,13 @@ #io-channel-cells = <1>; ranges = <0 0 0xffa50800 0x800>; - ams_ps: ams_ps@0 { + ams_ps: ams-ps@0 { compatible = "xlnx,zynqmp-ams-ps"; status = "disabled"; reg = <0x0 0x400>; }; - ams_pl: ams_pl@400 { + ams_pl: ams-pl@400 { compatible = "xlnx,zynqmp-ams-pl"; status = "disabled"; reg = <0x400 0x400>; @@ -955,6 +982,7 @@ }; zynqmp_dpsub: display@fd4a0000 { + bootph-all; compatible = "xlnx,zynqmp-dpsub-1.7"; status = "disabled"; reg = <0x0 0xfd4a0000 0x0 0x1000>, |