diff options
Diffstat (limited to 'arch/arm/kernel/head.S')
| -rw-r--r-- | arch/arm/kernel/head.S | 52 |
1 files changed, 36 insertions, 16 deletions
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 3637973a9708..bd755d97e459 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -80,7 +80,7 @@ ENTRY(stext) ARM_BE8(setend be ) @ ensure we are in BE8 mode - THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( badr r9, 1f ) @ Kernel is always entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) @@ -131,13 +131,30 @@ ENTRY(stext) * The following calls CPU specific code in a position independent * manner. See arch/arm/mm/proc-*.S for details. r10 = base of * xxx_proc_info structure selected by __lookup_processor_type - * above. On return, the CPU will be ready for the MMU to be - * turned on, and r0 will hold the CPU control register value. + * above. + * + * The processor init function will be called with: + * r1 - machine type + * r2 - boot data (atags/dt) pointer + * r4 - translation table base (low word) + * r5 - translation table base (high word, if LPAE) + * r8 - translation table base 1 (pfn if LPAE) + * r9 - cpuid + * r13 - virtual address for __enable_mmu -> __turn_mmu_on + * + * On return, the CPU will be ready for the MMU to be turned on, + * r0 will hold the CPU control register value, r1, r2, r4, and + * r9 will be preserved. r5 will also be preserved if LPAE. */ ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled - adr lr, BSYM(1f) @ return (PIC) address + badr lr, 1f @ return (PIC) address +#ifdef CONFIG_ARM_LPAE + mov r5, #0 @ high TTBR0 + mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn +#else mov r8, r4 @ set TTBR1 to swapper_pg_dir +#endif ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 @@ -158,7 +175,7 @@ ENDPROC(stext) * * Returns: * r0, r3, r5-r7 corrupted - * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) + * r4 = physical page table address */ __create_page_tables: pgtbl r4, r8 @ page table address @@ -333,7 +350,6 @@ __create_page_tables: #endif #ifdef CONFIG_ARM_LPAE sub r4, r4, #0x1000 @ point to the PGD table - mov r4, r4, lsr #ARCH_PGD_SHIFT #endif ret lr ENDPROC(__create_page_tables) @@ -346,9 +362,9 @@ __turn_mmu_on_loc: #if defined(CONFIG_SMP) .text -ENTRY(secondary_startup_arm) .arm - THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM. +ENTRY(secondary_startup_arm) + THUMB( badr r9, 1f ) @ Kernel is entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) @@ -381,10 +397,10 @@ ENTRY(secondary_startup) adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after sub lr, r4, r5 @ mmu has been enabled - ldr r4, [r7, lr] @ get secondary_data.pgdir - add r7, r7, #4 - ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir - adr lr, BSYM(__enable_mmu) @ return address + add r3, r7, lr + ldrd r4, [r3, #0] @ get secondary_data.pgdir + ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir + badr lr, __enable_mmu @ return address mov r13, r12 @ __secondary_switched address ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 @ initialise processor @@ -397,7 +413,7 @@ ENDPROC(secondary_startup_arm) * r6 = &secondary_data */ ENTRY(__secondary_switched) - ldr sp, [r7, #4] @ get secondary_data.stack + ldr sp, [r7, #12] @ get secondary_data.stack mov fp, #0 b secondary_start_kernel ENDPROC(__secondary_switched) @@ -416,12 +432,14 @@ __secondary_data: /* * Setup common bits before finally enabling the MMU. Essentially * this is just loading the page table pointer and domain access - * registers. + * registers. All these registers need to be preserved by the + * processor setup function (or set in the case of r0) * * r0 = cp#15 control register * r1 = machine ID * r2 = atags or dtb pointer - * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) + * r4 = TTBR pointer (low word) + * r5 = TTBR pointer (high word if LPAE) * r9 = processor ID * r13 = *virtual* address to jump to upon completion */ @@ -440,7 +458,9 @@ __enable_mmu: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif -#ifndef CONFIG_ARM_LPAE +#ifdef CONFIG_ARM_LPAE + mcrr p15, 0, r4, r5, c2 @ load TTBR0 +#else mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ |