diff options
Diffstat (limited to 'arch/arm/boot/dts/ti/omap/am57-pruss.dtsi')
-rw-r--r-- | arch/arm/boot/dts/ti/omap/am57-pruss.dtsi | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi new file mode 100644 index 000000000000..46c5383f0eee --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * + * Common PRUSS data for TI AM57xx platforms + */ + +&ocp { + pruss1_tm: target-module@4b226000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b226000 0x4>, + <0x4b226004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b200000 0x80000>; + + pruss1: pruss@0 { + compatible = "ti,am5728-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss1_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */ + <&dpll_gmac_h13x2_ck>; /* icss_clk */ + }; + }; + }; + + pruss1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss1_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru1_0: pru@34000 { + compatible = "ti,am5728-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am5728-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru1_1-fw"; + }; + + pruss1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&dpll_gmac_h13x2_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + reg = <0x32400 0x90>; + }; + }; + }; + + pruss2_tm: target-module@4b2a6000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b2a6000 0x4>, + <0x4b2a6004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b280000 0x80000>; + + pruss2: pruss@0 { + compatible = "ti,am5728-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss2_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss2_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss2_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */ + <&dpll_gmac_h13x2_ck>; /* icss_clk */ + }; + }; + }; + + pruss2_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss2_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru2_0: pru@34000 { + compatible = "ti,am5728-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru2_0-fw"; + }; + + pru2_1: pru@38000 { + compatible = "ti,am5728-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru2_1-fw"; + }; + + pruss2_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&dpll_gmac_h13x2_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + reg = <0x32400 0x90>; + }; + }; + }; +}; |