diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 648 |
1 files changed, 648 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi new file mode 100644 index 000000000000..3be38a3c4bb1 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + backlight = <&backlight>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-supply = <&sw2_reg>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + switch@10 { + compatible = "qca,qca8334"; + reg = <10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + eth2: port@2 { + reg = <2>; + label = "eth2"; + phy-handle = <&phy_port2>; + }; + + eth1: port@3 { + reg = <3>; + label = "eth1"; + phy-handle = <&phy_port3>; + }; + }; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c2>; + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + led@0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,col-offset = <4>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "disabled"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; |