diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
17 files changed, 234 insertions, 148 deletions
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt deleted file mode 100644 index df065aa53a83..000000000000 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ /dev/null @@ -1,133 +0,0 @@ -* Broadcom iProc PCIe controller with the platform bus interface - -Required properties: -- compatible: - "brcm,iproc-pcie" for the first generation of PAXB based controller, -used in SoCs including NSP, Cygnus, NS2, and Pegasus - "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based -controllers, used in Stingray - "brcm,iproc-pcie-paxc" for the first generation of PAXC based -controller, used in NS2 - "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based -controller, used in Stingray - PAXB-based root complex is used for external endpoint devices. PAXC-based -root complex is connected to emulated endpoint devices internal to the ASIC -- reg: base address and length of the PCIe controller I/O register space -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map, standard PCI properties to define the - mapping of the PCIe interface to interrupt numbers -- linux,pci-domain: PCI domain ID. Should be unique for each host controller -- bus-range: PCI bus numbers covered -- #address-cells: set to <3> -- #size-cells: set to <2> -- device_type: set to "pci" -- ranges: ranges for the PCI memory and I/O regions - -Optional properties: -- phys: phandle of the PCIe PHY device -- phy-names: must be "pcie-phy" -- dma-coherent: present if DMA operations are coherent -- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done - by the ASIC after power on reset. In this case, SW is required to configure -the mapping, based on inbound memory regions specified by this property. - -- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done -by the ASIC after power on reset. In this case, SW needs to configure it - -If the brcm,pcie-ob property is present, the following properties become -effective: - -Required: -- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal -address used by the iProc PCIe core (not the PCIe address) - -MSI support (optional): - -For older platforms without MSI integrated in the GIC, iProc PCIe core provides -an event queue based MSI support. The iProc MSI uses host memories to store -MSI posted writes in the event queues - -On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used - -- msi-map: Maps a Requester ID to an MSI controller and associated MSI -sideband data - -- msi-parent: Link to the device node of the MSI controller, used when no MSI -sideband data is passed between the iProc PCIe controller and the MSI -controller - -Refer to the following binding documents for more detailed description on -the use of 'msi-map' and 'msi-parent': - Documentation/devicetree/bindings/pci/pci-msi.txt - Documentation/devicetree/bindings/interrupt-controller/msi.txt - -When the iProc event queue based MSI is used, one needs to define the -following properties in the MSI device node: -- compatible: Must be "brcm,iproc-msi" -- msi-controller: claims itself as an MSI controller -- interrupts: List of interrupt IDs from its parent interrupt device - -Optional properties: -- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that -require the interrupt enable registers to be set explicitly to enable MSI - -Example: - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - - phys = <&phy 0 5>; - phy-names = "pcie-phy"; - - brcm,pcie-ob; - brcm,pcie-ob-axi-offset = <0x00000000>; - - msi-parent = <&msi0>; - - /* iProc event queue based MSI */ - msi0: msi@18012000 { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, - <GIC_SPI 97 IRQ_TYPE_NONE>, - <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>, - }; - }; - - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - - phys = <&phy 1 6>; - phy-names = "pcie-phy"; - }; diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml new file mode 100644 index 000000000000..0972868735fc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PCIe controller with the platform bus interface + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + items: + - enum: + # for the first generation of PAXB based controller, used in SoCs + # including NSP, Cygnus, NS2, and Pegasus + - brcm,iproc-pcie + # for the second generation of PAXB-based controllers, used in + # Stingray + - brcm,iproc-pcie-paxb-v2 + # For the first generation of PAXC based controller, used in NS2 + - brcm,iproc-pcie-paxc + # For the second generation of PAXC based controller, used in Stingray + - brcm,iproc-pcie-paxc-v2 + + reg: + maxItems: 1 + description: > + Base address and length of the PCIe controller I/O register space + + interrupt-map: true + + interrupt-map-mask: true + + "#interrupt-cells": + const: 1 + + ranges: + minItems: 1 + maxItems: 2 + description: > + Ranges for the PCI memory and I/O regions + + phys: + maxItems: 1 + + phy-names: + items: + - const: pcie-phy + + bus-range: true + + dma-coherent: true + + "#address-cells": true + + "#size-cells": true + + device_type: true + + brcm,pcie-ob: + type: boolean + description: > + Some iProc SoCs do not have the outbound address mapping done by the + ASIC after power on reset. In this case, SW needs to configure it + + brcm,pcie-ob-axi-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The offset from the AXI address to the internal address used by the + iProc PCIe core (not the PCIe address) + + msi: + type: object + properties: + compatible: + items: + - const: brcm,iproc-msi + + msi-parent: true + + msi-controller: true + + brcm,pcie-msi-inten: + type: boolean + description: > + Needs to be present for some older iProc platforms that require the + interrupt enable registers to be set explicitly to enable MSI + +dependencies: + brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"] + brcm,pcie-msi-inten: [msi-controller] + +required: + - compatible + - reg + - ranges + +if: + properties: + compatible: + contains: + enum: + - brcm,iproc-pcie +then: + required: + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <1>; + #size-cells = <1>; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-axi-offset = <0x00000000>; + + msi-parent = <&msi0>; + + /* iProc event queue based MSI */ + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, + <GIC_SPI 97 IRQ_TYPE_NONE>, + <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&phy 1 6>; + phy-names = "pcie-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 1fe102743f82..7c24d711b377 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -76,6 +76,7 @@ properties: maxItems: 3 required: + - compatible - reg - ranges - dma-ranges diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml index 651eee88989d..e6ef1012a580 100644 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml @@ -11,7 +11,6 @@ maintainers: allOf: - $ref: "cdns-pcie-ep.yaml#" - - $ref: "pci-ep.yaml#" properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml index 21e8a8849076..baeafda36ebe 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: "cdns-pcie.yaml#" + - $ref: "pci-ep.yaml#" properties: cdns,max-outbound-regions: diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml index cbee87802559..c9f04999c9cf 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -37,6 +37,19 @@ properties: minItems: 3 maxItems: 4 + clocks: true + + clock-names: + items: + - const: pcie_phy_ref + - const: pcie_aux + - const: pcie_apb_phy + - const: pcie_apb_sys + - const: pcie_aclk + + phys: + maxItems: 1 + hisilicon,clken-gpios: description: | Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml index 044fa967bc8b..d60f43fd9c5a 100644 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml @@ -45,6 +45,9 @@ patternProperties: phys: maxItems: 1 + phy-names: + pattern: '^pcie-phy[0-2]$' + required: - "#interrupt-cells" - interrupt-map-mask diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index 742206dbd965..0499b94627ae 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -95,6 +95,10 @@ properties: phys: maxItems: 1 + phy-names: + items: + - const: pcie-phy + '#interrupt-cells': const: 1 diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 7b0776457178..edb4f81253c8 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -46,6 +46,24 @@ properties: msi-parent: description: MSI controller the device is capable of using. + interrupt-controller: + type: object + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml index 2b9d1d6fc661..392f0ab488c2 100644 --- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml @@ -32,6 +32,8 @@ properties: - const: config - const: mgmt + dma-coherent: true + num-lanes: const: 8 @@ -61,10 +63,8 @@ required: - num-lanes - interrupts - interrupt-names - - interrupt-parent - interrupt-map-mask - interrupt-map - - clock-names - clocks - resets - pwren-gpios @@ -104,7 +104,6 @@ examples: <0x0 0x0 0x0 0x2 &plic0 58>, <0x0 0x0 0x0 0x3 &plic0 59>, <0x0 0x0 0x0 0x4 &plic0 60>; - clock-names = "pcie_aux"; clocks = <&prci PRCI_CLK_PCIE_AUX>; resets = <&prci 4>; pwren-gpios = <&gpio 5 0>; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index b5935b1b153f..e59059ab5be0 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -64,16 +64,12 @@ properties: maxItems: 1 deprecated: true - max-functions: - $ref: /schemas/types.yaml#/definitions/uint32 - description: maximum number of functions that can be configured - required: - reg - reg-names - compatible -unevaluatedProperties: false +additionalProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 9ed0dfba7f89..a5345c494744 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -73,7 +73,7 @@ properties: does not specify it, the driver autodetects it. deprecated: true -unevaluatedProperties: false +additionalProperties: true required: - reg diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index 144cbcd60a1c..179ab0858482 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -79,7 +79,7 @@ required: - resets - reset-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml index 78c217d362a7..a6896cb40e83 100644 --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml @@ -66,8 +66,6 @@ examples: reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie0_mode>; - num-ib-windows = <16>; - num-ob-windows = <16>; max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml index 834dc1c1743c..eabe1635e336 100644 --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml @@ -29,6 +29,9 @@ properties: - const: config - const: atu + interrupts: + maxItems: 1 + power-domains: maxItems: 1 @@ -87,7 +90,6 @@ examples: ti,syscon-pcie-id = <&pcie_devid>; ti,syscon-pcie-mode = <&pcie0_mode>; bus-range = <0x0 0xff>; - num-viewport = <16>; max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index cc900202df29..2115d5a3f0e1 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -60,6 +60,8 @@ properties: - const: fck - const: pcie_refclk + dma-coherent: true + vendor-id: const: 0x104c diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index a2bbc0eb7220..32f4641085bc 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -55,7 +55,6 @@ required: - reg-names - "#interrupt-cells" - interrupts - - interrupt-parent - interrupt-map - interrupt-map-mask - bus-range |