diff options
| -rw-r--r-- | drivers/clk/qcom/gcc-sm8150.c | 52 | ||||
| -rw-r--r-- | include/dt-bindings/clock/qcom,gcc-sm8150.h | 4 |
2 files changed, 56 insertions, 0 deletions
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c index 20877214acff..ef98fdc51755 100644 --- a/drivers/clk/qcom/gcc-sm8150.c +++ b/drivers/clk/qcom/gcc-sm8150.c @@ -21,6 +21,7 @@ #include "clk-rcg.h" #include "clk-regmap.h" #include "reset.h" +#include "gdsc.h" enum { P_BI_TCXO, @@ -3171,6 +3172,18 @@ static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = { }, }; +static struct clk_branch gcc_usb3_prim_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0xf058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_branch gcc_usb3_sec_clkref_clk = { .halt_reg = 0x8c028, .halt_check = BRANCH_HALT, @@ -3218,6 +3231,18 @@ static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = { }, }; +static struct clk_branch gcc_usb3_sec_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x10058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + /* * Clock ON depends on external parent 'config noc', so cant poll * delay and also mark as crtitical for video boot @@ -3292,6 +3317,24 @@ static struct clk_branch gcc_video_xo_clk = { }, }; +static struct gdsc usb30_prim_gdsc = { + .gdscr = 0xf004, + .pd = { + .name = "usb30_prim_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc usb30_sec_gdsc = { + .gdscr = 0x10004, + .pd = { + .name = "usb30_sec_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + static struct clk_regmap *gcc_sm8150_clocks[] = { [GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr, [GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr, @@ -3480,10 +3523,12 @@ static struct clk_regmap *gcc_sm8150_clocks[] = { [GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr, [GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr, [GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr, + [GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr, [GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr, [GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr, [GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr, [GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr, + [GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr, [GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr, [GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr, [GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr, @@ -3527,6 +3572,11 @@ static const struct qcom_reset_map gcc_sm8150_resets[] = { [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, }; +static struct gdsc *gcc_sm8150_gdscs[] = { + [USB30_PRIM_GDSC] = &usb30_prim_gdsc, + [USB30_SEC_GDSC] = &usb30_sec_gdsc, +}; + static const struct regmap_config gcc_sm8150_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -3541,6 +3591,8 @@ static const struct qcom_cc_desc gcc_sm8150_desc = { .num_clks = ARRAY_SIZE(gcc_sm8150_clocks), .resets = gcc_sm8150_resets, .num_resets = ARRAY_SIZE(gcc_sm8150_resets), + .gdscs = gcc_sm8150_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs), }; static const struct of_device_id gcc_sm8150_match_table[] = { diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h index 90d60ef94c64..3e1a91876610 100644 --- a/include/dt-bindings/clock/qcom,gcc-sm8150.h +++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h @@ -240,4 +240,8 @@ #define GCC_USB30_SEC_BCR 27 #define GCC_USB_PHY_CFG_AHB2PHY_BCR 28 +/* GCC GDSCRs */ +#define USB30_PRIM_GDSC 4 +#define USB30_SEC_GDSC 5 + #endif |