diff options
| -rw-r--r-- | drivers/memory/mvebu-devbus.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index b59a17fb7c3e..e66de7f3c33c 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -30,19 +30,19 @@ #include <linux/platform_device.h> /* Register definitions */ -#define DEV_WIDTH_BIT 30 -#define BADR_SKEW_BIT 28 -#define RD_HOLD_BIT 23 -#define ACC_NEXT_BIT 17 -#define RD_SETUP_BIT 12 -#define ACC_FIRST_BIT 6 +#define ARMADA_DEV_WIDTH_BIT 30 +#define ARMADA_BADR_SKEW_BIT 28 +#define ARMADA_RD_HOLD_BIT 23 +#define ARMADA_ACC_NEXT_BIT 17 +#define ARMADA_RD_SETUP_BIT 12 +#define ARMADA_ACC_FIRST_BIT 6 -#define SYNC_ENABLE_BIT 24 -#define WR_HIGH_BIT 16 -#define WR_LOW_BIT 8 +#define ARMADA_SYNC_ENABLE_BIT 24 +#define ARMADA_WR_HIGH_BIT 16 +#define ARMADA_WR_LOW_BIT 8 -#define READ_PARAM_OFFSET 0x0 -#define WRITE_PARAM_OFFSET 0x4 +#define ARMADA_READ_PARAM_OFFSET 0x0 +#define ARMADA_WRITE_PARAM_OFFSET 0x4 struct devbus_read_params { u32 bus_width; @@ -178,31 +178,31 @@ static int devbus_set_timing_params(struct devbus *devbus, return err; /* Set read timings */ - value = r.bus_width << DEV_WIDTH_BIT | - r.badr_skew << BADR_SKEW_BIT | - r.rd_hold << RD_HOLD_BIT | - r.acc_next << ACC_NEXT_BIT | - r.rd_setup << RD_SETUP_BIT | - r.acc_first << ACC_FIRST_BIT | + value = r.bus_width << ARMADA_DEV_WIDTH_BIT | + r.badr_skew << ARMADA_BADR_SKEW_BIT | + r.rd_hold << ARMADA_RD_HOLD_BIT | + r.acc_next << ARMADA_ACC_NEXT_BIT | + r.rd_setup << ARMADA_RD_SETUP_BIT | + r.acc_first << ARMADA_ACC_FIRST_BIT | r.turn_off; dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n", - devbus->base + READ_PARAM_OFFSET, + devbus->base + ARMADA_READ_PARAM_OFFSET, value); - writel(value, devbus->base + READ_PARAM_OFFSET); + writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET); /* Set write timings */ - value = w.sync_enable << SYNC_ENABLE_BIT | - w.wr_low << WR_LOW_BIT | - w.wr_high << WR_HIGH_BIT | + value = w.sync_enable << ARMADA_SYNC_ENABLE_BIT | + w.wr_low << ARMADA_WR_LOW_BIT | + w.wr_high << ARMADA_WR_HIGH_BIT | w.ale_wr; dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n", - devbus->base + WRITE_PARAM_OFFSET, + devbus->base + ARMADA_WRITE_PARAM_OFFSET, value); - writel(value, devbus->base + WRITE_PARAM_OFFSET); + writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET); return 0; } |