diff options
| -rw-r--r-- | arch/arm/boot/dts/ste-href.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ste-hrefprev60.dtsi | 5 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ste-hrefv60plus.dtsi | 25 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 18 |
4 files changed, 45 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 744c1e3a744d..6d8ce154347e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -32,11 +32,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 7f3975b58d16..b0278f4c486c 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -23,6 +23,11 @@ }; soc { + /* Enable UART1 on this board */ + uart@80121000 { + status = "okay"; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index a4bc9e77d640..810cda743b6d 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -43,15 +43,26 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>; + <&touch_hrefv60_mode>, + <&gpios_hrefv60_mode>; sdi0 { - /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { + /* SD card detect GPIO pin, extend default state */ default_hrefv60_cfg1 { pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; ipgpio { @@ -213,6 +224,16 @@ }; }; }; + gpios { + /* Dangling GPIO pins */ + gpios_hrefv60_mode: gpios_hrefv60 { + default_cfg1 { + /* Normally UART1 RXD, now dangling */ + pins = "GPIO4_AH6"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index acf14cebef81..32a5ccb14e7e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -230,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -459,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { |