diff options
| -rw-r--r-- | drivers/mfd/stm32-timers.c | 201 | ||||
| -rw-r--r-- | include/linux/mfd/stm32-timers.h | 46 |
2 files changed, 245 insertions, 2 deletions
diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c index 1d347e5dfa79..efcd4b980c94 100644 --- a/drivers/mfd/stm32-timers.c +++ b/drivers/mfd/stm32-timers.c @@ -4,16 +4,156 @@ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> */ +#include <linux/bitfield.h> #include <linux/mfd/stm32-timers.h> #include <linux/module.h> #include <linux/of_platform.h> #include <linux/reset.h> +#define STM32_TIMERS_MAX_REGISTERS 0x3fc + +/* DIER register DMA enable bits */ +static const u32 stm32_timers_dier_dmaen[STM32_TIMERS_MAX_DMAS] = { + TIM_DIER_CC1DE, + TIM_DIER_CC2DE, + TIM_DIER_CC3DE, + TIM_DIER_CC4DE, + TIM_DIER_UIE, + TIM_DIER_TDE, + TIM_DIER_COMDE +}; + +static void stm32_timers_dma_done(void *p) +{ + struct stm32_timers_dma *dma = p; + struct dma_tx_state state; + enum dma_status status; + + status = dmaengine_tx_status(dma->chan, dma->chan->cookie, &state); + if (status == DMA_COMPLETE) + complete(&dma->completion); +} + +/** + * stm32_timers_dma_burst_read - Read from timers registers using DMA. + * + * Read from STM32 timers registers using DMA on a single event. + * @dev: reference to stm32_timers MFD device + * @buf: DMA'able destination buffer + * @id: stm32_timers_dmas event identifier (ch[1..4], up, trig or com) + * @reg: registers start offset for DMA to read from (like CCRx for capture) + * @num_reg: number of registers to read upon each DMA request, starting @reg. + * @bursts: number of bursts to read (e.g. like two for pwm period capture) + * @tmo_ms: timeout (milliseconds) + */ +int stm32_timers_dma_burst_read(struct device *dev, u32 *buf, + enum stm32_timers_dmas id, u32 reg, + unsigned int num_reg, unsigned int bursts, + unsigned long tmo_ms) +{ + struct stm32_timers *ddata = dev_get_drvdata(dev); + unsigned long timeout = msecs_to_jiffies(tmo_ms); + struct regmap *regmap = ddata->regmap; + struct stm32_timers_dma *dma = &ddata->dma; + size_t len = num_reg * bursts * sizeof(u32); + struct dma_async_tx_descriptor *desc; + struct dma_slave_config config; + dma_cookie_t cookie; + dma_addr_t dma_buf; + u32 dbl, dba; + long err; + int ret; + + /* Sanity check */ + if (id < STM32_TIMERS_DMA_CH1 || id >= STM32_TIMERS_MAX_DMAS) + return -EINVAL; + + if (!num_reg || !bursts || reg > STM32_TIMERS_MAX_REGISTERS || + (reg + num_reg * sizeof(u32)) > STM32_TIMERS_MAX_REGISTERS) + return -EINVAL; + + if (!dma->chans[id]) + return -ENODEV; + mutex_lock(&dma->lock); + + /* Select DMA channel in use */ + dma->chan = dma->chans[id]; + dma_buf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, dma_buf)) { + ret = -ENOMEM; + goto unlock; + } + + /* Prepare DMA read from timer registers, using DMA burst mode */ + memset(&config, 0, sizeof(config)); + config.src_addr = (dma_addr_t)dma->phys_base + TIM_DMAR; + config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + ret = dmaengine_slave_config(dma->chan, &config); + if (ret) + goto unmap; + + desc = dmaengine_prep_slave_single(dma->chan, dma_buf, len, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!desc) { + ret = -EBUSY; + goto unmap; + } + + desc->callback = stm32_timers_dma_done; + desc->callback_param = dma; + cookie = dmaengine_submit(desc); + ret = dma_submit_error(cookie); + if (ret) + goto dma_term; + + reinit_completion(&dma->completion); + dma_async_issue_pending(dma->chan); + + /* Setup and enable timer DMA burst mode */ + dbl = FIELD_PREP(TIM_DCR_DBL, bursts - 1); + dba = FIELD_PREP(TIM_DCR_DBA, reg >> 2); + ret = regmap_write(regmap, TIM_DCR, dbl | dba); + if (ret) + goto dma_term; + + /* Clear pending flags before enabling DMA request */ + ret = regmap_write(regmap, TIM_SR, 0); + if (ret) + goto dcr_clr; + + ret = regmap_update_bits(regmap, TIM_DIER, stm32_timers_dier_dmaen[id], + stm32_timers_dier_dmaen[id]); + if (ret) + goto dcr_clr; + + err = wait_for_completion_interruptible_timeout(&dma->completion, + timeout); + if (err == 0) + ret = -ETIMEDOUT; + else if (err < 0) + ret = err; + + regmap_update_bits(regmap, TIM_DIER, stm32_timers_dier_dmaen[id], 0); + regmap_write(regmap, TIM_SR, 0); +dcr_clr: + regmap_write(regmap, TIM_DCR, 0); +dma_term: + dmaengine_terminate_all(dma->chan); +unmap: + dma_unmap_single(dev, dma_buf, len, DMA_FROM_DEVICE); +unlock: + dma->chan = NULL; + mutex_unlock(&dma->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stm32_timers_dma_burst_read); + static const struct regmap_config stm32_timers_regmap_cfg = { .reg_bits = 32, .val_bits = 32, .reg_stride = sizeof(u32), - .max_register = 0x3fc, + .max_register = STM32_TIMERS_MAX_REGISTERS, }; static void stm32_timers_get_arr_size(struct stm32_timers *ddata) @@ -27,12 +167,45 @@ static void stm32_timers_get_arr_size(struct stm32_timers *ddata) regmap_write(ddata->regmap, TIM_ARR, 0x0); } +static void stm32_timers_dma_probe(struct device *dev, + struct stm32_timers *ddata) +{ + int i; + char name[4]; + + init_completion(&ddata->dma.completion); + mutex_init(&ddata->dma.lock); + + /* Optional DMA support: get valid DMA channel(s) or NULL */ + for (i = STM32_TIMERS_DMA_CH1; i <= STM32_TIMERS_DMA_CH4; i++) { + snprintf(name, ARRAY_SIZE(name), "ch%1d", i + 1); + ddata->dma.chans[i] = dma_request_slave_channel(dev, name); + } + ddata->dma.chans[STM32_TIMERS_DMA_UP] = + dma_request_slave_channel(dev, "up"); + ddata->dma.chans[STM32_TIMERS_DMA_TRIG] = + dma_request_slave_channel(dev, "trig"); + ddata->dma.chans[STM32_TIMERS_DMA_COM] = + dma_request_slave_channel(dev, "com"); +} + +static void stm32_timers_dma_remove(struct device *dev, + struct stm32_timers *ddata) +{ + int i; + + for (i = STM32_TIMERS_DMA_CH1; i < STM32_TIMERS_MAX_DMAS; i++) + if (ddata->dma.chans[i]) + dma_release_channel(ddata->dma.chans[i]); +} + static int stm32_timers_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct stm32_timers *ddata; struct resource *res; void __iomem *mmio; + int ret; ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); if (!ddata) @@ -43,6 +216,9 @@ static int stm32_timers_probe(struct platform_device *pdev) if (IS_ERR(mmio)) return PTR_ERR(mmio); + /* Timer physical addr for DMA */ + ddata->dma.phys_base = res->start; + ddata->regmap = devm_regmap_init_mmio_clk(dev, "int", mmio, &stm32_timers_regmap_cfg); if (IS_ERR(ddata->regmap)) @@ -54,9 +230,29 @@ static int stm32_timers_probe(struct platform_device *pdev) stm32_timers_get_arr_size(ddata); + stm32_timers_dma_probe(dev, ddata); + platform_set_drvdata(pdev, ddata); - return devm_of_platform_populate(&pdev->dev); + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); + if (ret) + stm32_timers_dma_remove(dev, ddata); + + return ret; +} + +static int stm32_timers_remove(struct platform_device *pdev) +{ + struct stm32_timers *ddata = platform_get_drvdata(pdev); + + /* + * Don't use devm_ here: enfore of_platform_depopulate() happens before + * DMA are released, to avoid race on DMA. + */ + of_platform_depopulate(&pdev->dev); + stm32_timers_dma_remove(&pdev->dev, ddata); + + return 0; } static const struct of_device_id stm32_timers_of_match[] = { @@ -67,6 +263,7 @@ MODULE_DEVICE_TABLE(of, stm32_timers_of_match); static struct platform_driver stm32_timers_driver = { .probe = stm32_timers_probe, + .remove = stm32_timers_remove, .driver = { .name = "stm32-timers", .of_match_table = stm32_timers_of_match, diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h index 2aadab6f34a1..9596d5c58859 100644 --- a/include/linux/mfd/stm32-timers.h +++ b/include/linux/mfd/stm32-timers.h @@ -8,6 +8,8 @@ #define _LINUX_STM32_GPTIMER_H_ #include <linux/clk.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/regmap.h> #define TIM_CR1 0x00 /* Control Register 1 */ @@ -27,6 +29,8 @@ #define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ #define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ #define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ +#define TIM_DCR 0x48 /* DMA control register */ +#define TIM_DMAR 0x4C /* DMA register for transfer */ #define TIM_CR1_CEN BIT(0) /* Counter Enable */ #define TIM_CR1_DIR BIT(4) /* Counter Direction */ @@ -36,6 +40,13 @@ #define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ #define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ #define TIM_DIER_UIE BIT(0) /* Update interrupt */ +#define TIM_DIER_UDE BIT(8) /* Update DMA request Enable */ +#define TIM_DIER_CC1DE BIT(9) /* CC1 DMA request Enable */ +#define TIM_DIER_CC2DE BIT(10) /* CC2 DMA request Enable */ +#define TIM_DIER_CC3DE BIT(11) /* CC3 DMA request Enable */ +#define TIM_DIER_CC4DE BIT(12) /* CC4 DMA request Enable */ +#define TIM_DIER_COMDE BIT(13) /* COM DMA request Enable */ +#define TIM_DIER_TDE BIT(14) /* Trigger DMA request Enable */ #define TIM_SR_UIF BIT(0) /* Update interrupt flag */ #define TIM_EGR_UG BIT(0) /* Update Generation */ #define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ @@ -56,6 +67,8 @@ #define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23)) #define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */ #define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */ +#define TIM_DCR_DBA GENMASK(4, 0) /* DMA base addr */ +#define TIM_DCR_DBL GENMASK(12, 8) /* DMA burst len */ #define MAX_TIM_PSC 0xFFFF #define TIM_CR2_MMS_SHIFT 4 @@ -65,9 +78,42 @@ #define TIM_BDTR_BKF_SHIFT 16 #define TIM_BDTR_BK2F_SHIFT 20 +enum stm32_timers_dmas { + STM32_TIMERS_DMA_CH1, + STM32_TIMERS_DMA_CH2, + STM32_TIMERS_DMA_CH3, + STM32_TIMERS_DMA_CH4, + STM32_TIMERS_DMA_UP, + STM32_TIMERS_DMA_TRIG, + STM32_TIMERS_DMA_COM, + STM32_TIMERS_MAX_DMAS, +}; + +/** + * struct stm32_timers_dma - STM32 timer DMA handling. + * @completion: end of DMA transfer completion + * @phys_base: control registers physical base address + * @lock: protect DMA access + * @chan: DMA channel in use + * @chans: DMA channels available for this timer instance + */ +struct stm32_timers_dma { + struct completion completion; + phys_addr_t phys_base; + struct mutex lock; + struct dma_chan *chan; + struct dma_chan *chans[STM32_TIMERS_MAX_DMAS]; +}; + struct stm32_timers { struct clk *clk; struct regmap *regmap; u32 max_arr; + struct stm32_timers_dma dma; /* Only to be used by the parent */ }; + +int stm32_timers_dma_burst_read(struct device *dev, u32 *buf, + enum stm32_timers_dmas id, u32 reg, + unsigned int num_reg, unsigned int bursts, + unsigned long tmo_ms); #endif |