ethtool: Allow network drivers to dump arbitrary EEPROM data

Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.

get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.

Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 171 insertions, 0 deletions

diff --git a/net/ethtool/eeprom.c b/net/ethtool/eeprom.c
new file mode 100644
index 000000000000..8536dd905da5
--- /dev/null
+++ b/net/ethtool/eeprom.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/ethtool.h>
+#include "netlink.h"
+#include "common.h"
+
+struct eeprom_req_info {
+	struct ethnl_req_info	base;
+	u32			offset;
+	u32			length;
+	u8			page;
+	u8			bank;
+	u8			i2c_address;
+};
+
+struct eeprom_reply_data {
+	struct ethnl_reply_data base;
+	u32			length;
+	u8			*data;
+};
+
+#define MODULE_EEPROM_REQINFO(__req_base) \
+	container_of(__req_base, struct eeprom_req_info, base)
+
+#define MODULE_EEPROM_REPDATA(__reply_base) \
+	container_of(__reply_base, struct eeprom_reply_data, base)
+
+static int eeprom_prepare_data(const struct ethnl_req_info *req_base,
+			       struct ethnl_reply_data *reply_base,
+			       struct genl_info *info)
+{
+	struct eeprom_reply_data *reply = MODULE_EEPROM_REPDATA(reply_base);
+	struct eeprom_req_info *request = MODULE_EEPROM_REQINFO(req_base);
+	struct ethtool_module_eeprom page_data = {0};
+	struct net_device *dev = reply_base->dev;
+	int ret;
+
+	if (!dev->ethtool_ops->get_module_eeprom_by_page)
+		return -EOPNOTSUPP;
+
+	page_data.offset = request->offset;
+	page_data.length = request->length;
+	page_data.i2c_address = request->i2c_address;
+	page_data.page = request->page;
+	page_data.bank = request->bank;
+	page_data.data = kmalloc(page_data.length, GFP_KERNEL);
+	if (!page_data.data)
+		return -ENOMEM;
+
+	ret = ethnl_ops_begin(dev);
+	if (ret)
+		goto err_free;
+
+	ret = dev->ethtool_ops->get_module_eeprom_by_page(dev, &page_data,
+							  info->extack);
+	if (ret < 0)
+		goto err_ops;
+
+	reply->length = ret;
+	reply->data = page_data.data;
+
+	ethnl_ops_complete(dev);
+	return 0;
+
+err_ops:
+	ethnl_ops_complete(dev);
+err_free:
+	kfree(page_data.data);
+	return ret;
+}
+
+static int eeprom_parse_request(struct ethnl_req_info *req_info, struct nlattr **tb,
+				struct netlink_ext_ack *extack)
+{
+	struct eeprom_req_info *request = MODULE_EEPROM_REQINFO(req_info);
+
+	if (!tb[ETHTOOL_A_MODULE_EEPROM_OFFSET] ||
+	    !tb[ETHTOOL_A_MODULE_EEPROM_LENGTH] ||
+	    !tb[ETHTOOL_A_MODULE_EEPROM_PAGE] ||
+	    !tb[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS])
+		return -EINVAL;
+
+	request->i2c_address = nla_get_u8(tb[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS]);
+	request->offset = nla_get_u32(tb[ETHTOOL_A_MODULE_EEPROM_OFFSET]);
+	request->length = nla_get_u32(tb[ETHTOOL_A_MODULE_EEPROM_LENGTH]);
+
+	if (!request->length)
+		return -EINVAL;
+
+	/* The following set of conditions limit the API to only dump 1/2
+	 * EEPROM page without crossing low page boundary located at offset 128.
+	 * This means user may only request dumps of length limited to 128 from
+	 * either low 128 bytes or high 128 bytes.
+	 * For pages higher than 0 only high 128 bytes are accessible.
+	 */
+	request->page = nla_get_u8(tb[ETHTOOL_A_MODULE_EEPROM_PAGE]);
+	if (request->page && request->offset < ETH_MODULE_EEPROM_PAGE_LEN) {
+		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_PAGE],
+				    "reading from lower half page is allowed for page 0 only");
+		return -EINVAL;
+	}
+
+	if (request->offset < ETH_MODULE_EEPROM_PAGE_LEN &&
+	    request->offset + request->length > ETH_MODULE_EEPROM_PAGE_LEN) {
+		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_LENGTH],
+				    "reading cross half page boundary is illegal");
+		return -EINVAL;
+	} else if (request->offset >= ETH_MODULE_EEPROM_PAGE_LEN * 2) {
+		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_OFFSET],
+				    "offset is out of bounds");
+		return -EINVAL;
+	} else if (request->offset + request->length > ETH_MODULE_EEPROM_PAGE_LEN * 2) {
+		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_LENGTH],
+				    "reading cross page boundary is illegal");
+		return -EINVAL;
+	}
+
+	if (tb[ETHTOOL_A_MODULE_EEPROM_BANK])
+		request->bank = nla_get_u8(tb[ETHTOOL_A_MODULE_EEPROM_BANK]);
+
+	return 0;
+}
+
+static int eeprom_reply_size(const struct ethnl_req_info *req_base,
+			     const struct ethnl_reply_data *reply_base)
+{
+	const struct eeprom_req_info *request = MODULE_EEPROM_REQINFO(req_base);
+
+	return nla_total_size(sizeof(u8) * request->length); /* _EEPROM_DATA */
+}
+
+static int eeprom_fill_reply(struct sk_buff *skb,
+			     const struct ethnl_req_info *req_base,
+			     const struct ethnl_reply_data *reply_base)
+{
+	struct eeprom_reply_data *reply = MODULE_EEPROM_REPDATA(reply_base);
+
+	return nla_put(skb, ETHTOOL_A_MODULE_EEPROM_DATA, reply->length, reply->data);
+}
+
+static void eeprom_cleanup_data(struct ethnl_reply_data *reply_base)
+{
+	struct eeprom_reply_data *reply = MODULE_EEPROM_REPDATA(reply_base);
+
+	kfree(reply->data);
+}
+
+const struct ethnl_request_ops ethnl_module_eeprom_request_ops = {
+	.request_cmd		= ETHTOOL_MSG_MODULE_EEPROM_GET,
+	.reply_cmd		= ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY,
+	.hdr_attr		= ETHTOOL_A_MODULE_EEPROM_HEADER,
+	.req_info_size		= sizeof(struct eeprom_req_info),
+	.reply_data_size	= sizeof(struct eeprom_reply_data),
+
+	.parse_request		= eeprom_parse_request,
+	.prepare_data		= eeprom_prepare_data,
+	.reply_size		= eeprom_reply_size,
+	.fill_reply		= eeprom_fill_reply,
+	.cleanup_data		= eeprom_cleanup_data,
+};
+
+const struct nla_policy ethnl_module_eeprom_get_policy[] = {
+	[ETHTOOL_A_MODULE_EEPROM_HEADER]	= NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_MODULE_EEPROM_OFFSET]	= { .type = NLA_U32 },
+	[ETHTOOL_A_MODULE_EEPROM_LENGTH]	= { .type = NLA_U32 },
+	[ETHTOOL_A_MODULE_EEPROM_PAGE]		= { .type = NLA_U8 },
+	[ETHTOOL_A_MODULE_EEPROM_BANK]		= { .type = NLA_U8 },
+	[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS]	=
+		NLA_POLICY_RANGE(NLA_U8, 0, ETH_MODULE_MAX_I2C_ADDRESS),
+};
+