summaryrefslogtreecommitdiff
path: root/include/media/v4l2-subdev.h
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@osg.samsung.com>2015-08-22 06:12:35 -0300
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>2015-08-22 06:39:57 -0300
commitb84aeb03a886beef39f80e30b76d30a833dd8161 (patch)
tree19eda421ac993a88d016ec9c9a31388943126402 /include/media/v4l2-subdev.h
parent91963aae9a65286eea30ca810027ddc09b26e779 (diff)
[media] v4l2-subdev: reorder the v4l2_subdev_video_ops comments
The comments for struct v4l2_subdev_video_ops are out of the order as the parameter would appear at struct. This is not a problem for DocBook, but humans find harder to mentally reorder ;) So, put them at the right order. That makes easier to check what's missing, and to put the comments in the right place. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'include/media/v4l2-subdev.h')
-rw-r--r--include/media/v4l2-subdev.h18
1 files changed, 10 insertions, 8 deletions
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index d9315e5e8957..884a8d7c1368 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -309,6 +309,15 @@ struct v4l2_mbus_frame_desc {
/**
* struct v4l2_subdev_video_ops - Callbacks used when v4l device was opened
* in video mode.
+ *
+ * @s_routing: see s_routing in audio_ops, except this version is for video
+ * devices.
+ *
+ * @s_crystal_freq: sets the frequency of the crystal used to generate the
+ * clocks in Hz. An extra flags field allows device specific configuration
+ * regarding clock frequency dividers, etc. If not used, then set flags
+ * to 0. If the frequency is not supported, then -EINVAL is returned.
+ *
* @s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
* video input devices.
*
@@ -321,22 +330,15 @@ struct v4l2_mbus_frame_desc {
* @g_tvnorms_output: get v4l2_std_id with all standards supported by the video
* OUTPUT device. This is ignored by video capture devices.
*
- * @s_crystal_freq: sets the frequency of the crystal used to generate the
- * clocks in Hz. An extra flags field allows device specific configuration
- * regarding clock frequency dividers, etc. If not used, then set flags
- * to 0. If the frequency is not supported, then -EINVAL is returned.
- *
* @g_input_status: get input status. Same as the status field in the v4l2_input
* struct.
*
- * @s_routing: see s_routing in audio_ops, except this version is for video
- * devices.
- *
* @s_dv_timings(): Set custom dv timings in the sub device. This is used
* when sub device is capable of setting detailed timing information
* in the hardware to generate/detect the video signal.
*
* @g_dv_timings(): Get custom dv timings in the sub device.
+ *
* @g_mbus_config: get supported mediabus configurations
*
* @s_mbus_config: set a certain mediabus configuration. This operation is added