Merge tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few small fixes.

  Mostly driver specific but there's one in the core which fixes a
  deadlock when adding devices on spi-mux that's triggered because
  spi-mux is a SPI device which is itself a SPI controller and so can
  instantiate devices when registered.

  We were using a global lock to protect against reusing chip selects
  but they're a per controller thing so moving the lock per controller
  resolves that"

* tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi-mux: Fix false-positive lockdep splats
  spi: Fix deadlock when adding SPI controllers on SPI buses
  spi: bcm-qspi: clear MSPI spifie interrupt during probe
  spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround
  spi: mediatek: skip delays if they are 0
  spi: atmel: Fix PDC transfer setup bug
  spi: spidev: Add SPI ID table
  spi: Use 'flash' node name instead of 'spi-flash' in example

8 files changed, 123 insertions, 100 deletions

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 788dcdf25f00..f872cf196c2f 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1301,7 +1301,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 	 * DMA map early, for performance (empties dcache ASAP) and
 	 * better fault reporting.
 	 */
-	if ((!master->cur_msg_mapped)
+	if ((!master->cur_msg->is_dma_mapped)
 		&& as->use_pdc) {
 		if (atmel_spi_dma_map_xfer(as, xfer) < 0)
 			return -ENOMEM;
@@ -1381,7 +1381,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 		}
 	}
 
-	if (!master->cur_msg_mapped
+	if (!master->cur_msg->is_dma_mapped
 		&& as->use_pdc)
 		atmel_spi_dma_unmap_xfer(master, xfer);
 
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index a78e56f566dd..3043677ba222 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
 
 static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
 {
+	u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
+
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
 	if (has_bspi(qspi))
 		bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
 
+	/* clear interrupt */
+	bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1);
 }
 
 static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
@@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	if (!qspi->dev_ids)
 		return -ENOMEM;
 
+	/*
+	 * Some SoCs integrate spi controller (e.g., its interrupt bits)
+	 * in specific ways
+	 */
+	if (soc_intc) {
+		qspi->soc_intc = soc_intc;
+		soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
+	} else {
+		qspi->soc_intc = NULL;
+	}
+
+	if (qspi->clk) {
+		ret = clk_prepare_enable(qspi->clk);
+		if (ret) {
+			dev_err(dev, "failed to prepare clock\n");
+			goto qspi_probe_err;
+		}
+		qspi->base_clk = clk_get_rate(qspi->clk);
+	} else {
+		qspi->base_clk = MSPI_BASE_FREQ;
+	}
+
+	if (data->has_mspi_rev) {
+		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+		/* some older revs do not have a MSPI_REV register */
+		if ((rev & 0xff) == 0xff)
+			rev = 0;
+	}
+
+	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+	qspi->mspi_min_rev = rev & 0xf;
+	qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
+
+	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
+
+	/*
+	 * On SW resets it is possible to have the mask still enabled
+	 * Need to disable the mask and clear the status while we init
+	 */
+	bcm_qspi_hw_uninit(qspi);
+
 	for (val = 0; val < num_irqs; val++) {
 		irq = -1;
 		name = qspi_irq_tab[val].irq_name;
@@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 		goto qspi_probe_err;
 	}
 
-	/*
-	 * Some SoCs integrate spi controller (e.g., its interrupt bits)
-	 * in specific ways
-	 */
-	if (soc_intc) {
-		qspi->soc_intc = soc_intc;
-		soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
-	} else {
-		qspi->soc_intc = NULL;
-	}
-
-	ret = clk_prepare_enable(qspi->clk);
-	if (ret) {
-		dev_err(dev, "failed to prepare clock\n");
-		goto qspi_probe_err;
-	}
-
-	qspi->base_clk = clk_get_rate(qspi->clk);
-
-	if (data->has_mspi_rev) {
-		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
-		/* some older revs do not have a MSPI_REV register */
-		if ((rev & 0xff) == 0xff)
-			rev = 0;
-	}
-
-	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
-	qspi->mspi_min_rev = rev & 0xf;
-	qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
-
-	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
-
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
 	init_completion(&qspi->bspi_done);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 386e8c84be0a..a15de10ee286 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -233,36 +233,44 @@ static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
 		return delay;
 	inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
 
-	setup    = setup ? setup : 1;
-	hold     = hold ? hold : 1;
-	inactive = inactive ? inactive : 1;
-
-	reg_val = readl(mdata->base + SPI_CFG0_REG);
-	if (mdata->dev_comp->enhance_timing) {
-		hold = min_t(u32, hold, 0x10000);
-		setup = min_t(u32, setup, 0x10000);
-		reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
-		reg_val |= (((hold - 1) & 0xffff)
-			   << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
-		reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
-		reg_val |= (((setup - 1) & 0xffff)
-			   << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
-	} else {
-		hold = min_t(u32, hold, 0x100);
-		setup = min_t(u32, setup, 0x100);
-		reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
-		reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
-		reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
-		reg_val |= (((setup - 1) & 0xff)
-			    << SPI_CFG0_CS_SETUP_OFFSET);
+	if (hold || setup) {
+		reg_val = readl(mdata->base + SPI_CFG0_REG);
+		if (mdata->dev_comp->enhance_timing) {
+			if (hold) {
+				hold = min_t(u32, hold, 0x10000);
+				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+				reg_val |= (((hold - 1) & 0xffff)
+					<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x10000);
+				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+				reg_val |= (((setup - 1) & 0xffff)
+					<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+			}
+		} else {
+			if (hold) {
+				hold = min_t(u32, hold, 0x100);
+				reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+				reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x100);
+				reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+				reg_val |= (((setup - 1) & 0xff)
+					<< SPI_CFG0_CS_SETUP_OFFSET);
+			}
+		}
+		writel(reg_val, mdata->base + SPI_CFG0_REG);
 	}
-	writel(reg_val, mdata->base + SPI_CFG0_REG);
 
-	inactive = min_t(u32, inactive, 0x100);
-	reg_val = readl(mdata->base + SPI_CFG1_REG);
-	reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
-	reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
-	writel(reg_val, mdata->base + SPI_CFG1_REG);
+	if (inactive) {
+		inactive = min_t(u32, inactive, 0x100);
+		reg_val = readl(mdata->base + SPI_CFG1_REG);
+		reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+		reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+		writel(reg_val, mdata->base + SPI_CFG1_REG);
+	}
 
 	return 0;
 }
diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c
index 9708b7827ff7..f5d32ec4634e 100644
--- a/drivers/spi/spi-mux.c
+++ b/drivers/spi/spi-mux.c
@@ -137,6 +137,13 @@ static int spi_mux_probe(struct spi_device *spi)
 	priv = spi_controller_get_devdata(ctlr);
 	priv->spi = spi;
 
+	/*
+	 * Increase lockdep class as these lock are taken while the parent bus
+	 * already holds their instance's lock.
+	 */
+	lockdep_set_subclass(&ctlr->io_mutex, 1);
+	lockdep_set_subclass(&ctlr->add_lock, 1);
+
 	priv->mux = devm_mux_control_get(&spi->dev, NULL);
 	if (IS_ERR(priv->mux)) {
 		ret = dev_err_probe(&spi->dev, PTR_ERR(priv->mux),
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index a66fa97046ee..2b0301fc971c 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -33,6 +33,7 @@
 
 #include <linux/acpi.h>
 #include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
@@ -315,6 +316,7 @@
 #define NXP_FSPI_MIN_IOMAP	SZ_4M
 
 #define DCFG_RCWSR1		0x100
+#define SYS_PLL_RAT		GENMASK(6, 2)
 
 /* Access flash memory using IP bus only */
 #define FSPI_QUIRK_USE_IP_ONLY	BIT(0)
@@ -926,9 +928,8 @@ static void erratum_err050568(struct nxp_fspi *f)
 		{ .family = "QorIQ LS1028A" },
 		{ /* sentinel */ }
 	};
-	struct device_node *np;
 	struct regmap *map;
-	u32 val = 0, sysclk = 0;
+	u32 val, sys_pll_ratio;
 	int ret;
 
 	/* Check for LS1028A family */
@@ -937,7 +938,6 @@ static void erratum_err050568(struct nxp_fspi *f)
 		return;
 	}
 
-	/* Compute system clock frequency multiplier ratio */
 	map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg");
 	if (IS_ERR(map)) {
 		dev_err(f->dev, "No syscon regmap\n");
@@ -948,23 +948,11 @@ static void erratum_err050568(struct nxp_fspi *f)
 	if (ret < 0)
 		goto err;
 
-	/* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier ratio */
-	val = (val >> 2) & 0x1F;
-	WARN(val == 0, "Strapping is zero: Cannot determine ratio");
+	sys_pll_ratio = FIELD_GET(SYS_PLL_RAT, val);
+	dev_dbg(f->dev, "val: 0x%08x, sys_pll_ratio: %d\n", val, sys_pll_ratio);
 
-	/* Compute system clock frequency */
-	np = of_find_node_by_name(NULL, "clock-sysclk");
-	if (!np)
-		goto err;
-
-	if (of_property_read_u32(np, "clock-frequency", &sysclk))
-		goto err;
-
-	sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */
-	dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk);
-
-	/* Use IP bus only if PLL is 300MHz */
-	if (sysclk == 300)
+	/* Use IP bus only if platform clock is 300MHz */
+	if (sys_pll_ratio == 3)
 		f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY;
 
 	return;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 8ce840c7ecc8..713292b0c71e 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1182,8 +1182,7 @@ static int tegra_slink_resume(struct device *dev)
 }
 #endif
 
-#ifdef CONFIG_PM
-static int tegra_slink_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1208,7 +1207,6 @@ static int tegra_slink_runtime_resume(struct device *dev)
 	}
 	return 0;
 }
-#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops slink_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_slink_runtime_suspend,
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index aea037c65985..926b68aa45d3 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -478,12 +478,6 @@ static LIST_HEAD(spi_controller_list);
  */
 static DEFINE_MUTEX(board_lock);
 
-/*
- * Prevents addition of devices with same chip select and
- * addition of devices below an unregistering controller.
- */
-static DEFINE_MUTEX(spi_add_lock);
-
 /**
  * spi_alloc_device - Allocate a new SPI device
  * @ctlr: Controller to which device is connected
@@ -636,9 +630,9 @@ int spi_add_device(struct spi_device *spi)
 	 * chipselect **BEFORE** we call setup(), else we'll trash
 	 * its configuration.  Lock against concurrent add() calls.
 	 */
-	mutex_lock(&spi_add_lock);
+	mutex_lock(&ctlr->add_lock);
 	status = __spi_add_device(spi);
-	mutex_unlock(&spi_add_lock);
+	mutex_unlock(&ctlr->add_lock);
 	return status;
 }
 EXPORT_SYMBOL_GPL(spi_add_device);
@@ -658,7 +652,7 @@ static int spi_add_device_locked(struct spi_device *spi)
 	/* Set the bus ID string */
 	spi_dev_set_name(spi);
 
-	WARN_ON(!mutex_is_locked(&spi_add_lock));
+	WARN_ON(!mutex_is_locked(&ctlr->add_lock));
 	return __spi_add_device(spi);
 }
 
@@ -2553,6 +2547,12 @@ struct spi_controller *__spi_alloc_controller(struct device *dev,
 		return NULL;
 
 	device_initialize(&ctlr->dev);
+	INIT_LIST_HEAD(&ctlr->queue);
+	spin_lock_init(&ctlr->queue_lock);
+	spin_lock_init(&ctlr->bus_lock_spinlock);
+	mutex_init(&ctlr->bus_lock_mutex);
+	mutex_init(&ctlr->io_mutex);
+	mutex_init(&ctlr->add_lock);
 	ctlr->bus_num = -1;
 	ctlr->num_chipselect = 1;
 	ctlr->slave = slave;
@@ -2825,11 +2825,6 @@ int spi_register_controller(struct spi_controller *ctlr)
 			return id;
 		ctlr->bus_num = id;
 	}
-	INIT_LIST_HEAD(&ctlr->queue);
-	spin_lock_init(&ctlr->queue_lock);
-	spin_lock_init(&ctlr->bus_lock_spinlock);
-	mutex_init(&ctlr->bus_lock_mutex);
-	mutex_init(&ctlr->io_mutex);
 	ctlr->bus_lock_flag = 0;
 	init_completion(&ctlr->xfer_completion);
 	if (!ctlr->max_dma_len)
@@ -2966,7 +2961,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 
 	/* Prevent addition of new devices, unregister existing ones */
 	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
-		mutex_lock(&spi_add_lock);
+		mutex_lock(&ctlr->add_lock);
 
 	device_for_each_child(&ctlr->dev, NULL, __unregister);
 
@@ -2997,7 +2992,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	mutex_unlock(&board_lock);
 
 	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
-		mutex_unlock(&spi_add_lock);
+		mutex_unlock(&ctlr->add_lock);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_controller);
 
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 6dc29ce3b4bf..1bd73e322b7b 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -673,6 +673,19 @@ static const struct file_operations spidev_fops = {
 
 static struct class *spidev_class;
 
+static const struct spi_device_id spidev_spi_ids[] = {
+	{ .name = "dh2228fv" },
+	{ .name = "ltc2488" },
+	{ .name = "sx1301" },
+	{ .name = "bk4" },
+	{ .name = "dhcom-board" },
+	{ .name = "m53cpld" },
+	{ .name = "spi-petra" },
+	{ .name = "spi-authenta" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
+
 #ifdef CONFIG_OF
 static const struct of_device_id spidev_dt_ids[] = {
 	{ .compatible = "rohm,dh2228fv" },
@@ -818,6 +831,7 @@ static struct spi_driver spidev_spi_driver = {
 	},
 	.probe =	spidev_probe,
 	.remove =	spidev_remove,
+	.id_table =	spidev_spi_ids,
 
 	/* NOTE:  suspend/resume methods are not necessary here.
 	 * We don't do anything except pass the requests to/from