diff options
| author | Alexander Stein <alexander.stein@systec-electronic.com> | 2011-10-05 09:59:58 +0200 |
|---|---|---|
| committer | Florian Tobias Schandinat <FlorianSchandinat@gmx.de> | 2011-11-11 16:50:55 +0000 |
| commit | acfdc2e1bdb4b148e7546fe8948d8f75bd2f9377 (patch) | |
| tree | 558967596ab0d60d147b8c301b507c0fb4f0279d /drivers/video | |
| parent | 5d910426a6e80194a50e33351c91abcad266c809 (diff) | |
atmel_lcdfb: Use proper blanking on negative contrast polarity
If used with negative polarity the PWM unit cannot be disabled. This would
result in a full contrast screen.
Instead let the PWM unit enabled using 0x0 as compare value which darkens
the display.
In result no power saving is possible if inverted contrast polarity
is used.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/atmel_lcdfb.c | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 7e66263b18c1..8bfee6aecc8b 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -99,8 +99,11 @@ static int atmel_bl_update_status(struct backlight_device *bl) brightness = 0; lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness); - lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, + if (contrast_ctr & ATMEL_LCDC_POL_POSITIVE) + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, brightness ? contrast_ctr : 0); + else + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); bl->props.fb_blank = bl->props.power = sinfo->bl_power = power; |