USB: empeg: reimplement using generic framework

Kill custom read and write implementations (static 16*4k write-urb pool
shared among all ports in system).

Also remove old changelog entries in header (code is now gone, and
these entries can still be retrieved through git).

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 13 insertions, 388 deletions

diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 5f740a1eacab..504b5585ea45 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -13,44 +13,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * (07/16/2001) gb
- *	remove unused code in empeg_close() (thanks to Oliver Neukum for
- *	pointing this out) and rewrote empeg_set_termios().
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * (04/08/2001) gb
- *      Identify version on module load.
- *
- * (01/22/2001) gb
- *	Added write_room() and chars_in_buffer() support.
- *
- * (12/21/2000) gb
- *	Moved termio stuff inside the port->active check.
- *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
- *
- * (12/03/2000) gb
- *	Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
- *	This notifies the tty driver that the termios have changed.
- *
- * (11/13/2000) gb
- *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
- *	empeg_open() (It only needs to be set once - Doh!)
- *
- * (11/11/2000) gb
- *	Updated to work with id_table structure.
- *
- * (11/04/2000) gb
- *	Forked this from visor.c, and hacked it up to work with an
- *	Empeg ltd. empeg-car player.  Constructive criticism welcomed.
- *	I would like to say, 'Thank You' to Greg Kroah-Hartman for the
- *	use of his code, and for his guidance, advice and patience. :)
- *	A 'Thank You' is in order for John Ripley of Empeg ltd for his
- *	advice, and patience too.
- *
  */
 
 #include <linux/kernel.h>
@@ -71,7 +33,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.2"
+#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
 #define DRIVER_DESC "USB Empeg Mark I/II Driver"
 
@@ -79,19 +41,8 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void empeg_close(struct usb_serial_port *port);
-static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
-						const unsigned char *buf,
-						int count);
-static int  empeg_write_room(struct tty_struct *tty);
-static int  empeg_chars_in_buffer(struct tty_struct *tty);
-static void empeg_throttle(struct tty_struct *tty);
-static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
 static void empeg_init_termios(struct tty_struct *tty);
-static void empeg_write_bulk_callback(struct urb *urb);
-static void empeg_read_bulk_callback(struct urb *urb);
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
@@ -105,7 +56,7 @@ static struct usb_driver empeg_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver empeg_device = {
@@ -114,291 +65,16 @@ static struct usb_serial_driver empeg_device = {
 		.name =		"empeg",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&empeg_driver,
+	.usb_driver =		&empeg_driver,
 	.num_ports =		1,
-	.open =			empeg_open,
-	.close =		empeg_close,
-	.throttle =		empeg_throttle,
-	.unthrottle =		empeg_unthrottle,
+	.bulk_out_size =	256,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		empeg_startup,
 	.init_termios =		empeg_init_termios,
-	.write =		empeg_write,
-	.write_room =		empeg_write_room,
-	.chars_in_buffer =	empeg_chars_in_buffer,
-	.write_bulk_callback =	empeg_write_bulk_callback,
-	.read_bulk_callback =	empeg_read_bulk_callback,
 };
 
-#define NUM_URBS			16
-#define URB_TRANSFER_BUFFER_SIZE	4096
-
-static struct urb	*write_urb_pool[NUM_URBS];
-static spinlock_t	write_urb_pool_lock;
-static int		bytes_in;
-static int		bytes_out;
-
-/******************************************************************************
- * Empeg specific driver functions
- ******************************************************************************/
-static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	int result = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	bytes_in = 0;
-	bytes_out = 0;
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		serial->dev,
-		usb_rcvbulkpipe(serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		empeg_read_bulk_callback,
-		port);
-
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-
-	return result;
-}
-
-
-static void empeg_close(struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
-	/* Uncomment the following line if you want to see some statistics in your syslog */
-	/* dev_info (&port->dev, "Bytes In = %d  Bytes Out = %d\n", bytes_in, bytes_out); */
-}
-
-
-static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	const unsigned char *current_position = buf;
-	unsigned long flags;
-	int status;
-	int i;
-	int bytes_sent = 0;
-	int transfer_size;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		/* try to find a free urb in our list of them */
-		urb = NULL;
-
-		spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-		for (i = 0; i < NUM_URBS; ++i) {
-			if (write_urb_pool[i]->status != -EINPROGRESS) {
-				urb = write_urb_pool[i];
-				break;
-			}
-		}
-
-		spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-
-		if (urb == NULL) {
-			dbg("%s - no more free urbs", __func__);
-			goto exit;
-		}
-
-		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
-			if (urb->transfer_buffer == NULL) {
-				dev_err(&port->dev,
-					"%s no more kernel memory...\n",
-								__func__);
-				goto exit;
-			}
-		}
-
-		transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-		memcpy(urb->transfer_buffer, current_position, transfer_size);
-
-		usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
-
-		/* build up our urb */
-		usb_fill_bulk_urb(
-			urb,
-			serial->dev,
-			usb_sndbulkpipe(serial->dev,
-					port->bulk_out_endpointAddress),
-			urb->transfer_buffer,
-			transfer_size,
-			empeg_write_bulk_callback,
-			port);
-
-		/* send it down the pipe */
-		status = usb_submit_urb(urb, GFP_ATOMIC);
-		if (status) {
-			dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status);
-			bytes_sent = status;
-			break;
-		}
-
-		current_position += transfer_size;
-		bytes_sent += transfer_size;
-		count -= transfer_size;
-		bytes_out += transfer_size;
-
-	}
-exit:
-	return bytes_sent;
-}
-
-
-static int empeg_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int room = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-	/* tally up the number of bytes available */
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-	}
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-	dbg("%s - returns %d", __func__, room);
-	return room;
-
-}
-
-
-static int empeg_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int chars = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-	/* tally up the number of bytes waiting */
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-}
-
-
-static void empeg_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_port_softint(port);
-}
-
-
-static void empeg_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-	tty = tty_port_tty_get(&port->port);
-
-	if (urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-		bytes_in += urb->actual_length;
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		port->serial->dev,
-		usb_rcvbulkpipe(port->serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		empeg_read_bulk_callback,
-		port);
-
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
-	if (result)
-		dev_err(&urb->dev->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-
-	return;
-
-}
-
-
-static void empeg_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s - port %d", __func__, port->number);
-	usb_kill_urb(port->read_urb);
-}
-
-
-static void empeg_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int result;
-	dbg("%s - port %d", __func__, port->number);
-
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-}
-
-
-static int  empeg_startup(struct usb_serial *serial)
+static int empeg_startup(struct usb_serial *serial)
 {
 	int r;
 
@@ -414,10 +90,8 @@ static int  empeg_startup(struct usb_serial *serial)
 
 	/* continue on with initialization */
 	return r;
-
 }
 
-
 static void empeg_init_termios(struct tty_struct *tty)
 {
 	struct ktermios *termios = tty->termios;
@@ -462,77 +136,28 @@ static void empeg_init_termios(struct tty_struct *tty)
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
-
 static int __init empeg_init(void)
 {
-	struct urb *urb;
-	int i, retval;
-
-	/* create our write urb pool and transfer buffers */
-	spin_lock_init(&write_urb_pool_lock);
-	for (i = 0; i < NUM_URBS; ++i) {
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		write_urb_pool[i] = urb;
-		if (urb == NULL) {
-			printk(KERN_ERR "empeg: No more urbs???\n");
-			continue;
-		}
-
-		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
-								GFP_KERNEL);
-		if (!urb->transfer_buffer) {
-			printk(KERN_ERR "empeg: %s - out of memory for urb "
-			       "buffers.", __func__);
-			continue;
-		}
-	}
+	int retval;
 
 	retval = usb_serial_register(&empeg_device);
 	if (retval)
-		goto failed_usb_serial_register;
+		return retval;
 	retval = usb_register(&empeg_driver);
-	if (retval)
-		goto failed_usb_register;
-
+	if (retval) {
+		usb_serial_deregister(&empeg_device);
+		return retval;
+	}
 	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 	       DRIVER_DESC "\n");
 
 	return 0;
-failed_usb_register:
-	usb_serial_deregister(&empeg_device);
-failed_usb_serial_register:
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]) {
-			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb(write_urb_pool[i]);
-		}
-	}
-	return retval;
 }
 
-
 static void __exit empeg_exit(void)
 {
-	int i;
-	unsigned long flags;
-
 	usb_deregister(&empeg_driver);
 	usb_serial_deregister(&empeg_device);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]) {
-			/* FIXME - uncomment the following usb_kill_urb call
-			 * when the host controllers get fixed to set urb->dev
-			 * = NULL after the urb is finished.  Otherwise this
-			 * call oopses. */
-			/* usb_kill_urb(write_urb_pool[i]); */
-			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb(write_urb_pool[i]);
-		}
-	}
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 }