Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits)
  [ARM] 5171/1: ep93xx: fix compilation of modules using clocks
  [ARM] 5133/2: at91sam9g20 defconfig file
  [ARM] 5130/4: Support for the at91sam9g20
  [ARM] 5160/1: IOP3XX: gpio/gpiolib support
  [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.
  [ARM] 5084/1: zylonite: Register AC97 device
  [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
  [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers
  [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting
  [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state
  [ARM] 5144/1: pxaficp_ir: cleanup includes
  [ARM] pxa: remove pxa_set_cken()
  [ARM] pxa: allow clk aliases
  [ARM] Feroceon: don't disable BPU on boot
  [ARM] Orion: LED support for HP mv2120
  [ARM] Orion: add RD88F5181L-FXO support
  [ARM] Orion: add RD88F5181L-GE support
  [ARM] Orion: add Netgear WNR854T support
  [ARM] s3c2410_defconfig: update for current build
  [ARM] Acer n30: Minor style and indentation fixes.
  ...

9 files changed, 2130 insertions, 1965 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9bc42763623c..18ca9075e131 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -448,22 +448,27 @@ config SERIAL_CLPS711X_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_S3C2410
-	tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
-	depends on ARM && ARCH_S3C2410
-	select SERIAL_CORE
+config SERIAL_SAMSUNG
+	tristate "Samsung SoC serial support"
+	depends on ARM && PLAT_S3C24XX
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
-	  Currently this driver supports the UARTS on the S3C2410, S3C2440,
-	  S3C2442, S3C2412 and S3C2413 CPUs.
+config SERIAL_SAMSUNG_DEBUG
+	bool "Samsung SoC serial debug"
+	depends on SERIAL_SAMSUNG
+	help
+	  Add support for debugging the serial driver. Since this is
+	  generally being used as a console, we use our own output
+	  routines that go via the low-level debug printascii()
+	  function.
 
-config SERIAL_S3C2410_CONSOLE
-	bool "Support for console on S3C2410 serial port"
-	depends on SERIAL_S3C2410=y
+config SERIAL_SAMSUNG_CONSOLE
+	bool "Support for console on Samsung SoC serial port"
+	depends on SERIAL_SAMSUNG=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Allow selection of the S3C24XX on-board serial ports for use as
@@ -476,6 +481,37 @@ config SERIAL_S3C2410_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
+config SERIAL_S3C2400
+	tristate "Samsung S3C2410 Serial port support"
+	depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
+	default y if CPU_S3C2400
+	help
+	  Serial port support for the Samsung S3C2400 SoC
+
+config SERIAL_S3C2410
+	tristate "Samsung S3C2410 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C2410
+	default y if CPU_S3C2410
+	help
+	  Serial port support for the Samsung S3C2410 SoC
+
+config SERIAL_S3C2412
+	tristate "Samsung S3C2412/S3C2413 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C2412
+	default y if CPU_S3C2412
+	help
+	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
+
+config SERIAL_S3C2440
+	tristate "Samsung S3C2440/S3C2442 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+	default y if CPU_S3C2440
+	default y if CPU_S3C2442
+	help
+	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
+
+
+
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
@@ -753,7 +789,7 @@ config BFIN_UART3_CTSRTS
 
 config SERIAL_IMX
 	bool "IMX serial port support"
-	depends on ARM && ARCH_IMX
+	depends on ARM && (ARCH_IMX || ARCH_MXC)
 	select SERIAL_CORE
 	help
 	  If you have a machine based on a Motorola IMX CPU you
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0d9c09b1e836..7d85c1fbe7e0 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,7 +28,11 @@ obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
+obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
+obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
+obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
+obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
 obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
 obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5a375bf0ebf4..64acb39a51ba 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -40,6 +40,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -61,6 +62,11 @@
 #define UBIR  0xa4 /* BRM Incremental Register */
 #define UBMR  0xa8 /* BRM Modulator Register */
 #define UBRC  0xac /* Baud Rate Count Register */
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define ONEMS 0xb0 /* One Millisecond register */
+#define UTS   0xb4 /* UART Test Register */
+#endif
+#ifdef CONFIG_ARCH_IMX
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -70,6 +76,7 @@
 #define BMPR3 0xc8 /* BRM Modulator Register 3 */
 #define BMPR4 0xcc /* BRM Modulator Register 4 */
 #define UTS   0xd0 /* UART Test Register */
+#endif
 
 /* UART Control Register Bit Fields.*/
 #define  URXD_CHARRDY    (1<<15)
@@ -89,7 +96,12 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
+#ifdef CONFIG_ARCH_IMX
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
+#endif
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define  UCR1_UARTCLKEN  (0)	 /* not present on mx2/mx3 */
+#endif
 #define  UCR1_DOZE       (1<<1)	 /* Doze */
 #define  UCR1_UARTEN     (1<<0)	 /* UART enabled */
 #define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
@@ -163,8 +175,19 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
+#ifdef CONFIG_ARCH_IMX
 #define SERIAL_IMX_MAJOR	204
 #define MINOR_START		41
+#define DEV_NAME		"ttySMX"
+#define MAX_INTERNAL_IRQ	IMX_IRQS
+#endif
+
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define SERIAL_IMX_MAJOR        207
+#define MINOR_START	        16
+#define DEV_NAME		"ttymxc"
+#define MAX_INTERNAL_IRQ	MXC_MAX_INT_LINES
+#endif
 
 /*
  * This determines how often we check the modem status signals
@@ -176,12 +199,15 @@
 
 #define DRIVER_NAME "IMX-uart"
 
+#define UART_NR 8
+
 struct imx_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
 	int			txirq,rxirq,rtsirq;
 	int			have_rtscts:1;
+	struct clk		*clk;
 };
 
 /*
@@ -405,6 +431,26 @@ out:
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_int(int irq, void *dev_id)
+{
+	struct imx_port *sport = dev_id;
+	unsigned int sts;
+
+	sts = readl(sport->port.membase + USR1);
+
+	if (sts & USR1_RRDY)
+		imx_rxint(irq, dev_id);
+
+	if (sts & USR1_TRDY &&
+			readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
+		imx_txint(irq, dev_id);
+
+	if (sts & USR1_RTSS)
+		imx_rtsint(irq, dev_id);
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Return TIOCSER_TEMT when transmitter is not busy.
  */
@@ -477,7 +523,8 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	 * RFDIV is set such way to satisfy requested uartclk value
 	 */
 	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
+	ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+			/ sport->port.uartclk;
 
 	if(!ufcr_rfdiv)
 		ufcr_rfdiv = 1;
@@ -509,21 +556,34 @@ static int imx_startup(struct uart_port *port)
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
 	/*
-	 * Allocate the IRQ
+	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
+	 * chips only have one interrupt.
 	 */
-	retval = request_irq(sport->rxirq, imx_rxint, 0,
-			     DRIVER_NAME, sport);
-	if (retval) goto error_out1;
-
-	retval = request_irq(sport->txirq, imx_txint, 0,
-			     DRIVER_NAME, sport);
-	if (retval) goto error_out2;
-
-	retval = request_irq(sport->rtsirq, imx_rtsint,
-			     (sport->rtsirq < IMX_IRQS) ? 0 :
+	if (sport->txirq > 0) {
+		retval = request_irq(sport->rxirq, imx_rxint, 0,
+				DRIVER_NAME, sport);
+		if (retval)
+			goto error_out1;
+
+		retval = request_irq(sport->txirq, imx_txint, 0,
+				DRIVER_NAME, sport);
+		if (retval)
+			goto error_out2;
+
+		retval = request_irq(sport->rtsirq, imx_rtsint,
+			     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
 			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			     DRIVER_NAME, sport);
-	if (retval) goto error_out3;
+				DRIVER_NAME, sport);
+		if (retval)
+			goto error_out3;
+	} else {
+		retval = request_irq(sport->port.irq, imx_int, 0,
+				DRIVER_NAME, sport);
+		if (retval) {
+			free_irq(sport->port.irq, sport);
+			goto error_out1;
+		}
+	}
 
 	/*
 	 * Finally, clear and enable interrupts
@@ -548,9 +608,11 @@ static int imx_startup(struct uart_port *port)
 	return 0;
 
 error_out3:
-	free_irq(sport->txirq, sport);
+	if (sport->txirq)
+		free_irq(sport->txirq, sport);
 error_out2:
-	free_irq(sport->rxirq, sport);
+	if (sport->rxirq)
+		free_irq(sport->rxirq, sport);
 error_out1:
 	return retval;
 }
@@ -568,9 +630,12 @@ static void imx_shutdown(struct uart_port *port)
 	/*
 	 * Free the interrupts
 	 */
-	free_irq(sport->rtsirq, sport);
-	free_irq(sport->txirq, sport);
-	free_irq(sport->rxirq, sport);
+	if (sport->txirq > 0) {
+		free_irq(sport->rtsirq, sport);
+		free_irq(sport->txirq, sport);
+		free_irq(sport->rxirq, sport);
+	} else
+		free_irq(sport->port.irq, sport);
 
 	/*
 	 * Disable all interrupts, port and break condition.
@@ -589,6 +654,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+	unsigned int div, num, denom, ufcr;
 
 	/*
 	 * If we don't support modem control lines, don't allow
@@ -634,7 +700,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
 	quot = uart_get_divisor(port, baud);
 
 	spin_lock_irqsave(&sport->port.lock, flags);
@@ -684,14 +750,41 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			sport->port.membase + UCR2);
 	old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-	/* set the baud rate. We assume uartclk = 16 MHz
-	 *
-	 * baud * 16   UBIR - 1
-	 * --------- = --------
-	 *  uartclk    UBMR - 1
-	 */
-	writel((baud / 100) - 1, sport->port.membase + UBIR);
-	writel(10000 - 1, sport->port.membase + UBMR);
+	div = sport->port.uartclk / (baud * 16);
+	if (div > 7)
+		div = 7;
+	if (!div)
+		div = 1;
+
+	num = baud;
+	denom = port->uartclk / div / 16;
+
+	/* shift num and denom right until they fit into 16 bits */
+	while (num > 0x10000 || denom > 0x10000) {
+		num >>= 1;
+		denom >>= 1;
+	}
+	if (num > 0)
+		num -= 1;
+	if (denom > 0)
+		denom -= 1;
+
+	writel(num, sport->port.membase + UBIR);
+	writel(denom, sport->port.membase + UBMR);
+
+	if (div == 7)
+		div = 6; /* 6 in RFDIV means divide by 7 */
+	else
+		div = 6 - div;
+
+	ufcr = readl(sport->port.membase + UFCR);
+	ufcr = (ufcr & (~UFCR_RFDIV)) |
+	    (div << 7);
+	writel(ufcr, sport->port.membase + UFCR);
+
+#ifdef ONEMS
+	writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
+#endif
 
 	writel(old_ucr1, sport->port.membase + UCR1);
 
@@ -801,65 +894,7 @@ static struct uart_ops imx_pops = {
 	.verify_port	= imx_verify_port,
 };
 
-static struct imx_port imx_ports[] = {
-	{
-	.txirq  = UART1_MINT_TX,
-	.rxirq  = UART1_MINT_RX,
-	.rtsirq = UART1_MINT_RTS,
-	.port	= {
-		.type		= PORT_IMX,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)IMX_UART1_BASE,
-		.mapbase	= 0x00206000,
-		.irq		= UART1_MINT_RX,
-		.uartclk	= 16000000,
-		.fifosize	= 32,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.ops		= &imx_pops,
-		.line		= 0,
-	},
-	}, {
-	.txirq  = UART2_MINT_TX,
-	.rxirq  = UART2_MINT_RX,
-	.rtsirq = UART2_MINT_RTS,
-	.port	= {
-		.type		= PORT_IMX,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)IMX_UART2_BASE,
-		.mapbase	= 0x00207000,
-		.irq		= UART2_MINT_RX,
-		.uartclk	= 16000000,
-		.fifosize	= 32,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.ops		= &imx_pops,
-		.line		= 1,
-	},
-	}
-};
-
-/*
- * Setup the IMX serial ports.
- * Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
- * Which serial port this ends up being depends on the machine you're
- * running this kernel on.  I'm not convinced that this is a good idea,
- * but that's the way it traditionally works.
- *
- */
-static void __init imx_init_ports(void)
-{
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-	first = 0;
-
-	for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
-		init_timer(&imx_ports[i].timer);
-		imx_ports[i].timer.function = imx_timeout;
-		imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
-	}
-}
+static struct imx_port *imx_ports[UART_NR];
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
 static void imx_console_putchar(struct uart_port *port, int ch)
@@ -878,7 +913,7 @@ static void imx_console_putchar(struct uart_port *port, int ch)
 static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
-	struct imx_port *sport = &imx_ports[co->index];
+	struct imx_port *sport = imx_ports[co->index];
 	unsigned int old_ucr1, old_ucr2;
 
 	/*
@@ -944,7 +979,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
 		else
 			ucfr_rfdiv = 6 - ucfr_rfdiv;
 
-		uartclk = imx_get_perclk1();
+		uartclk = clk_get_rate(sport->clk);
 		uartclk /= ucfr_rfdiv;
 
 		{	/*
@@ -984,7 +1019,7 @@ imx_console_setup(struct console *co, char *options)
 	 */
 	if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
 		co->index = 0;
-	sport = &imx_ports[co->index];
+	sport = imx_ports[co->index];
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -998,7 +1033,7 @@ imx_console_setup(struct console *co, char *options)
 
 static struct uart_driver imx_reg;
 static struct console imx_console = {
-	.name		= "ttySMX",
+	.name		= DEV_NAME,
 	.write		= imx_console_write,
 	.device		= uart_console_device,
 	.setup		= imx_console_setup,
@@ -1007,14 +1042,6 @@ static struct console imx_console = {
 	.data		= &imx_reg,
 };
 
-static int __init imx_rs_console_init(void)
-{
-	imx_init_ports();
-	register_console(&imx_console);
-	return 0;
-}
-console_initcall(imx_rs_console_init);
-
 #define IMX_CONSOLE	&imx_console
 #else
 #define IMX_CONSOLE	NULL
@@ -1023,7 +1050,7 @@ console_initcall(imx_rs_console_init);
 static struct uart_driver imx_reg = {
 	.owner          = THIS_MODULE,
 	.driver_name    = DRIVER_NAME,
-	.dev_name       = "ttySMX",
+	.dev_name       = DEV_NAME,
 	.major          = SERIAL_IMX_MAJOR,
 	.minor          = MINOR_START,
 	.nr             = ARRAY_SIZE(imx_ports),
@@ -1050,29 +1077,98 @@ static int serial_imx_resume(struct platform_device *dev)
         return 0;
 }
 
-static int serial_imx_probe(struct platform_device *dev)
+static int serial_imx_probe(struct platform_device *pdev)
 {
+	struct imx_port *sport;
 	struct imxuart_platform_data *pdata;
+	void __iomem *base;
+	int ret = 0;
+	struct resource *res;
+
+	sport = kzalloc(sizeof(*sport), GFP_KERNEL);
+	if (!sport)
+		return -ENOMEM;
 
-	imx_ports[dev->id].port.dev = &dev->dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto free;
+	}
+
+	base = ioremap(res->start, PAGE_SIZE);
+	if (!base) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	sport->port.dev = &pdev->dev;
+	sport->port.mapbase = res->start;
+	sport->port.membase = base;
+	sport->port.type = PORT_IMX,
+	sport->port.iotype = UPIO_MEM;
+	sport->port.irq = platform_get_irq(pdev, 0);
+	sport->rxirq = platform_get_irq(pdev, 0);
+	sport->txirq = platform_get_irq(pdev, 1);
+	sport->rtsirq = platform_get_irq(pdev, 2);
+	sport->port.fifosize = 32;
+	sport->port.ops = &imx_pops;
+	sport->port.flags = UPF_BOOT_AUTOCONF;
+	sport->port.line = pdev->id;
+	init_timer(&sport->timer);
+	sport->timer.function = imx_timeout;
+	sport->timer.data     = (unsigned long)sport;
+
+	sport->clk = clk_get(&pdev->dev, "uart_clk");
+	if (IS_ERR(sport->clk)) {
+		ret = PTR_ERR(sport->clk);
+		goto unmap;
+	}
+	clk_enable(sport->clk);
 
-	pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+	sport->port.uartclk = clk_get_rate(sport->clk);
+
+	imx_ports[pdev->id] = sport;
+
+	pdata = pdev->dev.platform_data;
 	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
-		imx_ports[dev->id].have_rtscts = 1;
+		sport->have_rtscts = 1;
+
+	if (pdata->init)
+		pdata->init(pdev);
+
+	uart_add_one_port(&imx_reg, &sport->port);
+	platform_set_drvdata(pdev, &sport->port);
 
-	uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
-	platform_set_drvdata(dev, &imx_ports[dev->id]);
 	return 0;
+unmap:
+	iounmap(sport->port.membase);
+free:
+	kfree(sport);
+
+	return ret;
 }
 
-static int serial_imx_remove(struct platform_device *dev)
+static int serial_imx_remove(struct platform_device *pdev)
 {
-	struct imx_port *sport = platform_get_drvdata(dev);
+	struct imxuart_platform_data *pdata;
+	struct imx_port *sport = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(dev, NULL);
+	pdata = pdev->dev.platform_data;
 
-	if (sport)
+	platform_set_drvdata(pdev, NULL);
+
+	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
+		clk_put(sport->clk);
+	}
+
+	clk_disable(sport->clk);
+
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+	iounmap(sport->port.membase);
+	kfree(sport);
 
 	return 0;
 }
@@ -1095,8 +1191,6 @@ static int __init imx_serial_init(void)
 
 	printk(KERN_INFO "Serial: IMX driver\n");
 
-	imx_init_ports();
-
 	ret = uart_register_driver(&imx_reg);
 	if (ret)
 		return ret;
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
new file mode 100644
index 000000000000..a1102053e553
--- /dev/null
+++ b/drivers/serial/s3c2400.c
@@ -0,0 +1,106 @@
+/* linux/drivers/serial/s3c240.c
+ *
+ * Driver for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/irq.h>
+
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c2400_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	clk->divisor = 1;
+	clk->name = "pclk";
+
+	return 0;
+}
+
+static int s3c2400_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	return 0;
+}
+
+static int s3c2400_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	wr_regl(port, S3C2410_UCON,  cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c2400_uart_inf = {
+	.name		= "Samsung S3C2400 UART",
+	.type		= PORT_S3C2400,
+	.fifosize	= 16,
+	.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c2400_serial_getsource,
+	.set_clksrc	= s3c2400_serial_setsource,
+	.reset_port	= s3c2400_serial_resetport,
+};
+
+static int s3c2400_serial_probe(struct platform_device *dev)
+{
+	return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
+}
+
+static struct platform_driver s3c2400_serial_drv = {
+	.probe		= s3c2400_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c2400-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+
+static inline int s3c2400_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+}
+
+static inline void s3c2400_serial_exit(void)
+{
+	platform_driver_unregister(&s3c2400_serial_drv);
+}
+
+module_init(s3c2400_serial_init);
+module_exit(s3c2400_serial_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver");
+MODULE_ALIAS("platform:s3c2400-uart");
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 2b6a013639e6..c5f03f41686f 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1,1270 +1,30 @@
-/*
- * linux/drivers/serial/s3c2410.c
+/* linux/drivers/serial/s3c2410.c
  *
- * Driver for onboard UARTs on the Samsung S3C24XX
+ * Driver for Samsung S3C2410 SoC onboard UARTs.
  *
- * Based on drivers/char/serial.c and drivers/char/21285.c
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
  *
- * Ben Dooks, (c) 2003-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * Changelog:
- *
- * 22-Jul-2004  BJD  Finished off device rewrite
- *
- * 21-Jul-2004  BJD  Thanks to <herbet@13thfloor.at> for pointing out
- *                   problems with baud rate and loss of IR settings. Update
- *                   to add configuration via platform_device structure
- *
- * 28-Sep-2004  BJD  Re-write for the following items
- *		     - S3C2410 and S3C2440 serial support
- *		     - Power Management support
- *		     - Fix console via IrDA devices
- *		     - SysReq (Herbert Pötzl)
- *		     - Break character handling (Herbert Pötzl)
- *		     - spin-lock initialisation (Dimitry Andric)
- *		     - added clock control
- *		     - updated init code to use platform_device info
- *
- * 06-Mar-2005  BJD  Add s3c2440 fclk clock source
- *
- * 09-Mar-2005  BJD  Add s3c2400 support
- *
- * 10-Mar-2005  LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
-*/
-
-/* Note on 2440 fclk clock source handling
- *
- * Whilst it is possible to use the fclk as clock source, the method
- * of properly switching too/from this is currently un-implemented, so
- * whichever way is configured at startup is the one that will be used.
-*/
-
-/* Hote on 2410 error handling
- *
- * The s3c2410 manual has a love/hate affair with the contents of the
- * UERSTAT register in the UART blocks, and keeps marking some of the
- * error bits as reserved. Having checked with the s3c2410x01,
- * it copes with BREAKs properly, so I am happy to ignore the RESERVED
- * feature from the latter versions of the manual.
- *
- * If it becomes aparrent that latter versions of the 2410 remove these
- * bits, then action will have to be taken to differentiate the versions
- * and change the policy on BREAK
- *
- * BJD, 04-Nov-2004
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
 */
 
-
-#if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
-#include <linux/sysrq.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
-
 #include <asm/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 
-/* structures */
-
-struct s3c24xx_uart_info {
-	char			*name;
-	unsigned int		type;
-	unsigned int		fifosize;
-	unsigned long		rx_fifomask;
-	unsigned long		rx_fifoshift;
-	unsigned long		rx_fifofull;
-	unsigned long		tx_fifomask;
-	unsigned long		tx_fifoshift;
-	unsigned long		tx_fifofull;
-
-	/* clock source control */
-
-	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-	int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
-	/* uart controls */
-	int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
-};
-
-struct s3c24xx_uart_port {
-	unsigned char			rx_claimed;
-	unsigned char			tx_claimed;
-
-	struct s3c24xx_uart_info	*info;
-	struct s3c24xx_uart_clksrc	*clksrc;
-	struct clk			*clk;
-	struct clk			*baudclk;
-	struct uart_port		port;
-};
-
-
-/* configuration defines */
-
-#if 0
-#if 1
-/* send debug to the low-level output routines */
-
-extern void printascii(const char *);
-
-static void
-s3c24xx_serial_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-#define dbg(x...) s3c24xx_serial_dbg(x)
-
-#else
-#define dbg(x...) printk(KERN_DEBUG "s3c24xx: ");
-#endif
-#else /* no debug */
-#define dbg(x...) do {} while(0)
-#endif
-
-/* UART name and device definitions */
-
-#define S3C24XX_SERIAL_NAME	"ttySAC"
-#define S3C24XX_SERIAL_MAJOR	204
-#define S3C24XX_SERIAL_MINOR	64
-
-
-/* conversion functions */
-
-#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
-
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
-/* register access controls */
-
-#define portaddr(port, reg) ((port)->membase + (reg))
-
-#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
-#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
-
-#define wr_regb(port, reg, val) \
-  do { __raw_writeb(val, portaddr(port, reg)); } while(0)
-
-#define wr_regl(port, reg, val) \
-  do { __raw_writel(val, portaddr(port, reg)); } while(0)
-
-/* macros to change one thing to another */
-
-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
-
-/* flag to ignore all characters comming in */
-#define RXSTAT_DUMMY_READ (0x10000000)
-
-static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
-{
-	return container_of(port, struct s3c24xx_uart_port, port);
-}
-
-/* translate a port to the device name */
-
-static inline const char *s3c24xx_serial_portname(struct uart_port *port)
-{
-	return to_platform_device(port->dev)->name;
-}
-
-static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
-{
-	return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
-}
-
-static void s3c24xx_serial_rx_enable(struct uart_port *port)
-{
-	unsigned long flags;
-	unsigned int ucon, ufcon;
-	int count = 10000;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	while (--count && !s3c24xx_serial_txempty_nofifo(port))
-		udelay(100);
-
-	ufcon = rd_regl(port, S3C2410_UFCON);
-	ufcon |= S3C2410_UFCON_RESETRX;
-	wr_regl(port, S3C2410_UFCON, ufcon);
-
-	ucon = rd_regl(port, S3C2410_UCON);
-	ucon |= S3C2410_UCON_RXIRQMODE;
-	wr_regl(port, S3C2410_UCON, ucon);
-
-	rx_enabled(port) = 1;
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void s3c24xx_serial_rx_disable(struct uart_port *port)
-{
-	unsigned long flags;
-	unsigned int ucon;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	ucon = rd_regl(port, S3C2410_UCON);
-	ucon &= ~S3C2410_UCON_RXIRQMODE;
-	wr_regl(port, S3C2410_UCON, ucon);
-
-	rx_enabled(port) = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void s3c24xx_serial_stop_tx(struct uart_port *port)
-{
-	if (tx_enabled(port)) {
-		disable_irq(TX_IRQ(port));
-		tx_enabled(port) = 0;
-		if (port->flags & UPF_CONS_FLOW)
-			s3c24xx_serial_rx_enable(port);
-	}
-}
-
-static void s3c24xx_serial_start_tx(struct uart_port *port)
-{
-	if (!tx_enabled(port)) {
-		if (port->flags & UPF_CONS_FLOW)
-			s3c24xx_serial_rx_disable(port);
-
-		enable_irq(TX_IRQ(port));
-		tx_enabled(port) = 1;
-	}
-}
-
-
-static void s3c24xx_serial_stop_rx(struct uart_port *port)
-{
-	if (rx_enabled(port)) {
-		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-		disable_irq(RX_IRQ(port));
-		rx_enabled(port) = 0;
-	}
-}
-
-static void s3c24xx_serial_enable_ms(struct uart_port *port)
-{
-}
-
-static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
-{
-	return to_ourport(port)->info;
-}
-
-static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
-{
-	if (port->dev == NULL)
-		return NULL;
-
-	return (struct s3c2410_uartcfg *)port->dev->platform_data;
-}
-
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
-				     unsigned long ufstat)
-{
-	struct s3c24xx_uart_info *info = ourport->info;
-
-	if (ufstat & info->rx_fifofull)
-		return info->fifosize;
-
-	return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
-}
-
-
-/* ? - where has parity gone?? */
-#define S3C2410_UERSTAT_PARITY (0x1000)
-
-static irqreturn_t
-s3c24xx_serial_rx_chars(int irq, void *dev_id)
-{
-	struct s3c24xx_uart_port *ourport = dev_id;
-	struct uart_port *port = &ourport->port;
-	struct tty_struct *tty = port->info->tty;
-	unsigned int ufcon, ch, flag, ufstat, uerstat;
-	int max_count = 64;
-
-	while (max_count-- > 0) {
-		ufcon = rd_regl(port, S3C2410_UFCON);
-		ufstat = rd_regl(port, S3C2410_UFSTAT);
-
-		if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
-			break;
-
-		uerstat = rd_regl(port, S3C2410_UERSTAT);
-		ch = rd_regb(port, S3C2410_URXH);
-
-		if (port->flags & UPF_CONS_FLOW) {
-			int txe = s3c24xx_serial_txempty_nofifo(port);
-
-			if (rx_enabled(port)) {
-				if (!txe) {
-					rx_enabled(port) = 0;
-					continue;
-				}
-			} else {
-				if (txe) {
-					ufcon |= S3C2410_UFCON_RESETRX;
-					wr_regl(port, S3C2410_UFCON, ufcon);
-					rx_enabled(port) = 1;
-					goto out;
-				}
-				continue;
-			}
-		}
-
-		/* insert the character into the buffer */
-
-		flag = TTY_NORMAL;
-		port->icount.rx++;
-
-		if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
-			dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
-			    ch, uerstat);
-
-			/* check for break */
-			if (uerstat & S3C2410_UERSTAT_BREAK) {
-				dbg("break!\n");
-				port->icount.brk++;
-				if (uart_handle_break(port))
-				    goto ignore_char;
-			}
-
-			if (uerstat & S3C2410_UERSTAT_FRAME)
-				port->icount.frame++;
-			if (uerstat & S3C2410_UERSTAT_OVERRUN)
-				port->icount.overrun++;
-
-			uerstat &= port->read_status_mask;
-
-			if (uerstat & S3C2410_UERSTAT_BREAK)
-				flag = TTY_BREAK;
-			else if (uerstat & S3C2410_UERSTAT_PARITY)
-				flag = TTY_PARITY;
-			else if (uerstat & ( S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_OVERRUN))
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char(port, ch))
-			goto ignore_char;
-
-		uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
-
-	ignore_char:
-		continue;
-	}
-	tty_flip_buffer_push(tty);
-
- out:
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
-{
-	struct s3c24xx_uart_port *ourport = id;
-	struct uart_port *port = &ourport->port;
-	struct circ_buf *xmit = &port->info->xmit;
-	int count = 256;
-
-	if (port->x_char) {
-		wr_regb(port, S3C2410_UTXH, port->x_char);
-		port->icount.tx++;
-		port->x_char = 0;
-		goto out;
-	}
-
-	/* if there isnt anything more to transmit, or the uart is now
-	 * stopped, disable the uart and exit
-	*/
-
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		s3c24xx_serial_stop_tx(port);
-		goto out;
-	}
-
-	/* try and drain the buffer... */
-
-	while (!uart_circ_empty(xmit) && count-- > 0) {
-		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
-			break;
-
-		wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-	}
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-
-	if (uart_circ_empty(xmit))
-		s3c24xx_serial_stop_tx(port);
-
- out:
-	return IRQ_HANDLED;
-}
-
-static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-	unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
-	unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
-
-	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		if ((ufstat & info->tx_fifomask) != 0 ||
-		    (ufstat & info->tx_fifofull))
-			return 0;
-
-		return 1;
-	}
-
-	return s3c24xx_serial_txempty_nofifo(port);
-}
-
-/* no modem control lines */
-static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
-{
-	unsigned int umstat = rd_regb(port,S3C2410_UMSTAT);
-
-	if (umstat & S3C2410_UMSTAT_CTS)
-		return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
-	else
-		return TIOCM_CAR | TIOCM_DSR;
-}
-
-static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	/* todo - possibly remove AFC and do manual CTS */
-}
-
-static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
-{
-	unsigned long flags;
-	unsigned int ucon;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	ucon = rd_regl(port, S3C2410_UCON);
-
-	if (break_state)
-		ucon |= S3C2410_UCON_SBREAK;
-	else
-		ucon &= ~S3C2410_UCON_SBREAK;
-
-	wr_regl(port, S3C2410_UCON, ucon);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void s3c24xx_serial_shutdown(struct uart_port *port)
-{
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-
-	if (ourport->tx_claimed) {
-		free_irq(TX_IRQ(port), ourport);
-		tx_enabled(port) = 0;
-		ourport->tx_claimed = 0;
-	}
-
-	if (ourport->rx_claimed) {
-		free_irq(RX_IRQ(port), ourport);
-		ourport->rx_claimed = 0;
-		rx_enabled(port) = 0;
-	}
-}
-
-
-static int s3c24xx_serial_startup(struct uart_port *port)
-{
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	int ret;
-
-	dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
-	    port->mapbase, port->membase);
-
-	rx_enabled(port) = 1;
-
-	ret = request_irq(RX_IRQ(port),
-			  s3c24xx_serial_rx_chars, 0,
-			  s3c24xx_serial_portname(port), ourport);
-
-	if (ret != 0) {
-		printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
-		return ret;
-	}
-
-	ourport->rx_claimed = 1;
-
-	dbg("requesting tx irq...\n");
-
-	tx_enabled(port) = 1;
-
-	ret = request_irq(TX_IRQ(port),
-			  s3c24xx_serial_tx_chars, 0,
-			  s3c24xx_serial_portname(port), ourport);
-
-	if (ret) {
-		printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
-		goto err;
-	}
-
-	ourport->tx_claimed = 1;
-
-	dbg("s3c24xx_serial_startup ok\n");
-
-	/* the port reset code should have done the correct
-	 * register setup for the port controls */
-
-	return ret;
-
- err:
-	s3c24xx_serial_shutdown(port);
-	return ret;
-}
-
-/* power power management control */
-
-static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
-			      unsigned int old)
-{
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-
-	switch (level) {
-	case 3:
-		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
-			clk_disable(ourport->baudclk);
-
-		clk_disable(ourport->clk);
-		break;
-
-	case 0:
-		clk_enable(ourport->clk);
-
-		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
-			clk_enable(ourport->baudclk);
-
-		break;
-	default:
-		printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
-	}
-}
-
-/* baud rate calculation
- *
- * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
- * of different sources, including the peripheral clock ("pclk") and an
- * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
- * with a programmable extra divisor.
- *
- * The following code goes through the clock sources, and calculates the
- * baud clocks (and the resultant actual baud rates) and then tries to
- * pick the closest one and select that.
- *
-*/
-
-
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
-	.name		= "pclk",
-	.min_baud	= 0,
-	.max_baud	= 0,
-	.divisor	= 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
-	return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
-	return (info->set_clksrc)(port, c);
-}
-
-struct baud_calc {
-	struct s3c24xx_uart_clksrc	*clksrc;
-	unsigned int			 calc;
-	unsigned int			 quot;
-	struct clk			*src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
-				   struct uart_port *port,
-				   struct s3c24xx_uart_clksrc *clksrc,
-				   unsigned int baud)
-{
-	unsigned long rate;
-
-	calc->src = clk_get(port->dev, clksrc->name);
-	if (calc->src == NULL || IS_ERR(calc->src))
-		return 0;
-
-	rate = clk_get_rate(calc->src);
-	rate /= clksrc->divisor;
-
-	calc->clksrc = clksrc;
-	calc->quot = (rate + (8 * baud)) / (16 * baud);
-	calc->calc = (rate / (calc->quot * 16));
-
-	calc->quot--;
-	return 1;
-}
-
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
-					  struct s3c24xx_uart_clksrc **clksrc,
-					  struct clk **clk,
-					  unsigned int baud)
-{
-	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
-	struct s3c24xx_uart_clksrc *clkp;
-	struct baud_calc res[MAX_CLKS];
-	struct baud_calc *resptr, *best, *sptr;
-	int i;
-
-	clkp = cfg->clocks;
-	best = NULL;
-
-	if (cfg->clocks_size < 2) {
-		if (cfg->clocks_size == 0)
-			clkp = &tmp_clksrc;
-
-		/* check to see if we're sourcing fclk, and if so we're
-		 * going to have to update the clock source
-		 */
-
-		if (strcmp(clkp->name, "fclk") == 0) {
-			struct s3c24xx_uart_clksrc src;
-
-			s3c24xx_serial_getsource(port, &src);
-
-			/* check that the port already using fclk, and if
-			 * not, then re-select fclk
-			 */
-
-			if (strcmp(src.name, clkp->name) == 0) {
-				s3c24xx_serial_setsource(port, clkp);
-				s3c24xx_serial_getsource(port, &src);
-			}
-
-			clkp->divisor = src.divisor;
-		}
-
-		s3c24xx_serial_calcbaud(res, port, clkp, baud);
-		best = res;
-		resptr = best + 1;
-	} else {
-		resptr = res;
-
-		for (i = 0; i < cfg->clocks_size; i++, clkp++) {
-			if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
-				resptr++;
-		}
-	}
-
-	/* ok, we now need to select the best clock we found */
-
-	if (!best) {
-		unsigned int deviation = (1<<30)|((1<<30)-1);
-		int calc_deviation;
-
-		for (sptr = res; sptr < resptr; sptr++) {
-			printk(KERN_DEBUG
-			       "found clk %p (%s) quot %d, calc %d\n",
-			       sptr->clksrc, sptr->clksrc->name,
-			       sptr->quot, sptr->calc);
-
-			calc_deviation = baud - sptr->calc;
-			if (calc_deviation < 0)
-				calc_deviation = -calc_deviation;
-
-			if (calc_deviation < deviation) {
-				best = sptr;
-				deviation = calc_deviation;
-			}
-		}
-
-		printk(KERN_DEBUG "best %p (deviation %d)\n", best, deviation);
-	}
-
-	printk(KERN_DEBUG "selected clock %p (%s) quot %d, calc %d\n",
-	       best->clksrc, best->clksrc->name, best->quot, best->calc);
-
-	/* store results to pass back */
-
-	*clksrc = best->clksrc;
-	*clk    = best->src;
-
-	return best->quot;
-}
-
-static void s3c24xx_serial_set_termios(struct uart_port *port,
-				       struct ktermios *termios,
-				       struct ktermios *old)
-{
-	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	struct s3c24xx_uart_clksrc *clksrc = NULL;
-	struct clk *clk = NULL;
-	unsigned long flags;
-	unsigned int baud, quot;
-	unsigned int ulcon;
-	unsigned int umcon;
-
-	/*
-	 * We don't support modem control lines.
-	 */
-	termios->c_cflag &= ~(HUPCL | CMSPAR);
-	termios->c_cflag |= CLOCAL;
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-
-	baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
-	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
-		quot = port->custom_divisor;
-	else
-		quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
-
-	/* check to see if we need  to change clock source */
-
-	if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
-		s3c24xx_serial_setsource(port, clksrc);
-
-		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
-			clk_disable(ourport->baudclk);
-			ourport->baudclk  = NULL;
-		}
-
-		clk_enable(clk);
-
-		ourport->clksrc = clksrc;
-		ourport->baudclk = clk;
-	}
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		dbg("config: 5bits/char\n");
-		ulcon = S3C2410_LCON_CS5;
-		break;
-	case CS6:
-		dbg("config: 6bits/char\n");
-		ulcon = S3C2410_LCON_CS6;
-		break;
-	case CS7:
-		dbg("config: 7bits/char\n");
-		ulcon = S3C2410_LCON_CS7;
-		break;
-	case CS8:
-	default:
-		dbg("config: 8bits/char\n");
-		ulcon = S3C2410_LCON_CS8;
-		break;
-	}
-
-	/* preserve original lcon IR settings */
-	ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
-
-	if (termios->c_cflag & CSTOPB)
-		ulcon |= S3C2410_LCON_STOPB;
-
-	umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
-
-	if (termios->c_cflag & PARENB) {
-		if (termios->c_cflag & PARODD)
-			ulcon |= S3C2410_LCON_PODD;
-		else
-			ulcon |= S3C2410_LCON_PEVEN;
-	} else {
-		ulcon |= S3C2410_LCON_PNONE;
-	}
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
-
-	wr_regl(port, S3C2410_ULCON, ulcon);
-	wr_regl(port, S3C2410_UBRDIV, quot);
-	wr_regl(port, S3C2410_UMCON, umcon);
-
-	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
-	    rd_regl(port, S3C2410_ULCON),
-	    rd_regl(port, S3C2410_UCON),
-	    rd_regl(port, S3C2410_UFCON));
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	/*
-	 * Which character status flags are we interested in?
-	 */
-	port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
-
-	/*
-	 * Which character status flags should we ignore?
-	 */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
-	if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
-
-	/*
-	 * Ignore all characters if CREAD is not set.
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= RXSTAT_DUMMY_READ;
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *s3c24xx_serial_type(struct uart_port *port)
-{
-	switch (port->type) {
-	case PORT_S3C2410:
-		return "S3C2410";
-	case PORT_S3C2440:
-		return "S3C2440";
-	case PORT_S3C2412:
-		return "S3C2412";
-	default:
-		return NULL;
-	}
-}
-
-#define MAP_SIZE (0x100)
-
-static void s3c24xx_serial_release_port(struct uart_port *port)
-{
-	release_mem_region(port->mapbase, MAP_SIZE);
-}
-
-static int s3c24xx_serial_request_port(struct uart_port *port)
-{
-	const char *name = s3c24xx_serial_portname(port);
-	return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
-}
-
-static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
-	if (flags & UART_CONFIG_TYPE &&
-	    s3c24xx_serial_request_port(port) == 0)
-		port->type = info->type;
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int
-s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
-	if (ser->type != PORT_UNKNOWN && ser->type != info->type)
-		return -EINVAL;
-
-	return 0;
-}
-
-
-#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
-
-static struct console s3c24xx_serial_console;
-
-#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
-#else
-#define S3C24XX_SERIAL_CONSOLE NULL
-#endif
-
-static struct uart_ops s3c24xx_serial_ops = {
-	.pm		= s3c24xx_serial_pm,
-	.tx_empty	= s3c24xx_serial_tx_empty,
-	.get_mctrl	= s3c24xx_serial_get_mctrl,
-	.set_mctrl	= s3c24xx_serial_set_mctrl,
-	.stop_tx	= s3c24xx_serial_stop_tx,
-	.start_tx	= s3c24xx_serial_start_tx,
-	.stop_rx	= s3c24xx_serial_stop_rx,
-	.enable_ms	= s3c24xx_serial_enable_ms,
-	.break_ctl	= s3c24xx_serial_break_ctl,
-	.startup	= s3c24xx_serial_startup,
-	.shutdown	= s3c24xx_serial_shutdown,
-	.set_termios	= s3c24xx_serial_set_termios,
-	.type		= s3c24xx_serial_type,
-	.release_port	= s3c24xx_serial_release_port,
-	.request_port	= s3c24xx_serial_request_port,
-	.config_port	= s3c24xx_serial_config_port,
-	.verify_port	= s3c24xx_serial_verify_port,
-};
-
-
-static struct uart_driver s3c24xx_uart_drv = {
-	.owner		= THIS_MODULE,
-	.dev_name	= "s3c2410_serial",
-	.nr		= 3,
-	.cons		= S3C24XX_SERIAL_CONSOLE,
-	.driver_name	= S3C24XX_SERIAL_NAME,
-	.major		= S3C24XX_SERIAL_MAJOR,
-	.minor		= S3C24XX_SERIAL_MINOR,
-};
-
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
-	[0] = {
-		.port = {
-			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_S3CUART_RX0,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		}
-	},
-	[1] = {
-		.port = {
-			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_S3CUART_RX1,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		}
-	},
-#if NR_PORTS > 2
-
-	[2] = {
-		.port = {
-			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_S3CUART_RX2,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		}
-	}
-#endif
-};
-
-/* s3c24xx_serial_resetport
- *
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
-*/
-
-static inline int s3c24xx_serial_resetport(struct uart_port * port,
-					   struct s3c2410_uartcfg *cfg)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
-	return (info->reset_port)(port, cfg);
-}
-
-/* s3c24xx_serial_init_port
- *
- * initialise a single serial port from the platform device given
- */
-
-static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
-				    struct s3c24xx_uart_info *info,
-				    struct platform_device *platdev)
-{
-	struct uart_port *port = &ourport->port;
-	struct s3c2410_uartcfg *cfg;
-	struct resource *res;
-	int ret;
-
-	dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
-
-	if (platdev == NULL)
-		return -ENODEV;
-
-	cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
-	if (port->mapbase != 0)
-		return 0;
-
-	if (cfg->hwport > 3)
-		return -EINVAL;
-
-	/* setup info for port */
-	port->dev	= &platdev->dev;
-	ourport->info	= info;
-
-	/* copy the info in from provided structure */
-	ourport->port.fifosize = info->fifosize;
-
-	dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
-	port->uartclk = 1;
-
-	if (cfg->uart_flags & UPF_CONS_FLOW) {
-		dbg("s3c24xx_serial_init_port: enabling flow control\n");
-		port->flags |= UPF_CONS_FLOW;
-	}
-
-	/* sort our the physical and virtual addresses for each UART */
-
-	res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		printk(KERN_ERR "failed to find memory resource for uart\n");
-		return -EINVAL;
-	}
-
-	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
-
-	port->mapbase	= res->start;
-	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
-	ret = platform_get_irq(platdev, 0);
-	if (ret < 0)
-		port->irq = 0;
-	else
-		port->irq = ret;
-
-	ourport->clk	= clk_get(&platdev->dev, "uart");
-
-	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
-	    port->mapbase, port->membase, port->irq, port->uartclk);
-
-	/* reset the fifos (and setup the uart) */
-	s3c24xx_serial_resetport(port, cfg);
-	return 0;
-}
-
-/* Device driver serial port probe */
-
-static int probe_index = 0;
-
-static int s3c24xx_serial_probe(struct platform_device *dev,
-				struct s3c24xx_uart_info *info)
-{
-	struct s3c24xx_uart_port *ourport;
-	int ret;
-
-	dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
-
-	ourport = &s3c24xx_serial_ports[probe_index];
-	probe_index++;
-
-	dbg("%s: initialising port %p...\n", __func__, ourport);
-
-	ret = s3c24xx_serial_init_port(ourport, info, dev);
-	if (ret < 0)
-		goto probe_err;
-
-	dbg("%s: adding port\n", __func__);
-	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
-	platform_set_drvdata(dev, &ourport->port);
-
-	return 0;
-
- probe_err:
-	return ret;
-}
-
-static int s3c24xx_serial_remove(struct platform_device *dev)
-{
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
-
-	if (port)
-		uart_remove_one_port(&s3c24xx_uart_drv, port);
-
-	return 0;
-}
-
-/* UART power management code */
-
-#ifdef CONFIG_PM
-
-static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
-
-	if (port)
-		uart_suspend_port(&s3c24xx_uart_drv, port);
-
-	return 0;
-}
-
-static int s3c24xx_serial_resume(struct platform_device *dev)
-{
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-
-	if (port) {
-		clk_enable(ourport->clk);
-		s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
-		clk_disable(ourport->clk);
-
-		uart_resume_port(&s3c24xx_uart_drv, port);
-	}
-
-	return 0;
-}
-
-#else
-#define s3c24xx_serial_suspend NULL
-#define s3c24xx_serial_resume  NULL
-#endif
-
-static int s3c24xx_serial_init(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info)
-{
-	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-	return platform_driver_register(drv);
-}
-
-
-/* now comes the code to initialise either the s3c2410 or s3c2440 serial
- * port information
-*/
-
-/* cpu specific variations on the serial port support */
-
-#ifdef CONFIG_CPU_S3C2400
-
-static int s3c2400_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	clk->divisor = 1;
-	clk->name = "pclk";
-
-	return 0;
-}
-
-static int s3c2400_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	return 0;
-}
-
-static int s3c2400_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	wr_regl(port, S3C2410_UCON,  cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2400_uart_inf = {
-	.name		= "Samsung S3C2400 UART",
-	.type		= PORT_S3C2400,
-	.fifosize	= 16,
-	.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2400_serial_getsource,
-	.set_clksrc	= s3c2400_serial_setsource,
-	.reset_port	= s3c2400_serial_resetport,
-};
-
-static int s3c2400_serial_probe(struct platform_device *dev)
-{
-	return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
-}
-
-static struct platform_driver s3c2400_serial_drv = {
-	.probe		= s3c2400_serial_probe,
-	.remove		= s3c24xx_serial_remove,
-	.suspend	= s3c24xx_serial_suspend,
-	.resume		= s3c24xx_serial_resume,
-	.driver		= {
-		.name	= "s3c2400-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static inline int s3c2400_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
-}
-
-static inline void s3c2400_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2400_serial_drv);
-}
-
-#define s3c2400_uart_inf_at &s3c2400_uart_inf
-#else
-
-static inline int s3c2400_serial_init(void)
-{
-	return 0;
-}
-
-static inline void s3c2400_serial_exit(void)
-{
-}
-
-#define s3c2400_uart_inf_at NULL
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* S3C2410 support */
-
-#ifdef CONFIG_CPU_S3C2410
+#include "samsung.h"
 
 static int s3c2410_serial_setsource(struct uart_port *port,
 				    struct s3c24xx_uart_clksrc *clk)
@@ -1323,8 +83,6 @@ static struct s3c24xx_uart_info s3c2410_uart_inf = {
 	.reset_port	= s3c2410_serial_resetport,
 };
 
-/* device management */
-
 static int s3c2410_serial_probe(struct platform_device *dev)
 {
 	return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
@@ -1333,612 +91,28 @@ static int s3c2410_serial_probe(struct platform_device *dev)
 static struct platform_driver s3c2410_serial_drv = {
 	.probe		= s3c2410_serial_probe,
 	.remove		= s3c24xx_serial_remove,
-	.suspend	= s3c24xx_serial_suspend,
-	.resume		= s3c24xx_serial_resume,
 	.driver		= {
 		.name	= "s3c2410-uart",
 		.owner	= THIS_MODULE,
 	},
 };
 
-static inline int s3c2410_serial_init(void)
+s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+
+static int __init s3c2410_serial_init(void)
 {
 	return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
 }
 
-static inline void s3c2410_serial_exit(void)
+static void __exit s3c2410_serial_exit(void)
 {
 	platform_driver_unregister(&s3c2410_serial_drv);
 }
 
-#define s3c2410_uart_inf_at &s3c2410_uart_inf
-#else
-
-static inline int s3c2410_serial_init(void)
-{
-	return 0;
-}
-
-static inline void s3c2410_serial_exit(void)
-{
-}
-
-#define s3c2410_uart_inf_at NULL
-
-#endif /* CONFIG_CPU_S3C2410 */
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-static int s3c2440_serial_setsource(struct uart_port *port,
-				     struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	// todo - proper fclk<>nonfclk switch //
-
-	ucon &= ~S3C2440_UCON_CLKMASK;
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2440_UCON_UCLK;
-	else if (strcmp(clk->name, "pclk") == 0)
-		ucon |= S3C2440_UCON_PCLK;
-	else if (strcmp(clk->name, "fclk") == 0)
-		ucon |= S3C2440_UCON_FCLK;
-	else {
-		printk(KERN_ERR "unknown clock source %s\n", clk->name);
-		return -EINVAL;
-	}
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-
-static int s3c2440_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-	unsigned long ucon0, ucon1, ucon2;
-
-	switch (ucon & S3C2440_UCON_CLKMASK) {
-	case S3C2440_UCON_UCLK:
-		clk->divisor = 1;
-		clk->name = "uclk";
-		break;
-
-	case S3C2440_UCON_PCLK:
-	case S3C2440_UCON_PCLK2:
-		clk->divisor = 1;
-		clk->name = "pclk";
-		break;
-
-	case S3C2440_UCON_FCLK:
-		/* the fun of calculating the uart divisors on
-		 * the s3c2440 */
-
-		ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-		ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-		ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-		printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
-
-		ucon0 &= S3C2440_UCON0_DIVMASK;
-		ucon1 &= S3C2440_UCON1_DIVMASK;
-		ucon2 &= S3C2440_UCON2_DIVMASK;
-
-		if (ucon0 != 0) {
-			clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
-			clk->divisor += 6;
-		} else if (ucon1 != 0) {
-			clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
-			clk->divisor += 21;
-		} else if (ucon2 != 0) {
-			clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
-			clk->divisor += 36;
-		} else {
-			/* manual calims 44, seems to be 9 */
-			clk->divisor = 9;
-		}
-
-		clk->name = "fclk";
-		break;
-	}
-
-	return 0;
-}
-
-static int s3c2440_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	/* ensure we don't change the clock settings... */
-
-	ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
-
-	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2440_uart_inf = {
-	.name		= "Samsung S3C2440 UART",
-	.type		= PORT_S3C2440,
-	.fifosize	= 64,
-	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2440_serial_getsource,
-	.set_clksrc	= s3c2440_serial_setsource,
-	.reset_port	= s3c2440_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2440_serial_probe(struct platform_device *dev)
-{
-	dbg("s3c2440_serial_probe: dev=%p\n", dev);
-	return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
-}
-
-static struct platform_driver s3c2440_serial_drv = {
-	.probe		= s3c2440_serial_probe,
-	.remove		= s3c24xx_serial_remove,
-	.suspend	= s3c24xx_serial_suspend,
-	.resume		= s3c24xx_serial_resume,
-	.driver		= {
-		.name	= "s3c2440-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-
-static inline int s3c2440_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
-}
-
-static inline void s3c2440_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2440_serial_drv);
-}
-
-#define s3c2440_uart_inf_at &s3c2440_uart_inf
-#else
-
-static inline int s3c2440_serial_init(void)
-{
-	return 0;
-}
-
-static inline void s3c2440_serial_exit(void)
-{
-}
-
-#define s3c2440_uart_inf_at NULL
-#endif /* CONFIG_CPU_S3C2440 */
-
-#if defined(CONFIG_CPU_S3C2412)
-
-static int s3c2412_serial_setsource(struct uart_port *port,
-				     struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	ucon &= ~S3C2412_UCON_CLKMASK;
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2440_UCON_UCLK;
-	else if (strcmp(clk->name, "pclk") == 0)
-		ucon |= S3C2440_UCON_PCLK;
-	else if (strcmp(clk->name, "usysclk") == 0)
-		ucon |= S3C2412_UCON_USYSCLK;
-	else {
-		printk(KERN_ERR "unknown clock source %s\n", clk->name);
-		return -EINVAL;
-	}
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-
-static int s3c2412_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	switch (ucon & S3C2412_UCON_CLKMASK) {
-	case S3C2412_UCON_UCLK:
-		clk->divisor = 1;
-		clk->name = "uclk";
-		break;
-
-	case S3C2412_UCON_PCLK:
-	case S3C2412_UCON_PCLK2:
-		clk->divisor = 1;
-		clk->name = "pclk";
-		break;
-
-	case S3C2412_UCON_USYSCLK:
-		clk->divisor = 1;
-		clk->name = "usysclk";
-		break;
-	}
-
-	return 0;
-}
-
-static int s3c2412_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	dbg("%s: port=%p (%08lx), cfg=%p\n",
-	    __func__, port, port->mapbase, cfg);
-
-	/* ensure we don't change the clock settings... */
-
-	ucon &= S3C2412_UCON_CLKMASK;
-
-	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2412_uart_inf = {
-	.name		= "Samsung S3C2412 UART",
-	.type		= PORT_S3C2412,
-	.fifosize	= 64,
-	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2412_serial_getsource,
-	.set_clksrc	= s3c2412_serial_setsource,
-	.reset_port	= s3c2412_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2412_serial_probe(struct platform_device *dev)
-{
-	dbg("s3c2440_serial_probe: dev=%p\n", dev);
-	return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
-}
-
-static struct platform_driver s3c2412_serial_drv = {
-	.probe		= s3c2412_serial_probe,
-	.remove		= s3c24xx_serial_remove,
-	.suspend	= s3c24xx_serial_suspend,
-	.resume		= s3c24xx_serial_resume,
-	.driver		= {
-		.name	= "s3c2412-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-
-static inline int s3c2412_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
-}
-
-static inline void s3c2412_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2412_serial_drv);
-}
-
-#define s3c2412_uart_inf_at &s3c2412_uart_inf
-#else
-
-static inline int s3c2412_serial_init(void)
-{
-	return 0;
-}
-
-static inline void s3c2412_serial_exit(void)
-{
-}
-
-#define s3c2412_uart_inf_at NULL
-#endif /* CONFIG_CPU_S3C2440 */
-
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
-	int ret;
-
-	ret = uart_register_driver(&s3c24xx_uart_drv);
-	if (ret < 0) {
-		printk(KERN_ERR "failed to register UART driver\n");
-		return -1;
-	}
-
-	s3c2400_serial_init();
-	s3c2410_serial_init();
-	s3c2412_serial_init();
-	s3c2440_serial_init();
-
-	return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
-	s3c2400_serial_exit();
-	s3c2410_serial_exit();
-	s3c2412_serial_exit();
-	s3c2440_serial_exit();
-
-	uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
-/* Console code */
-
-#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
-
-static struct uart_port *cons_uart;
-
-static int
-s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-	unsigned long ufstat, utrstat;
-
-	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		/* fifo mode - check ammount of data in fifo registers... */
-
-		ufstat = rd_regl(port, S3C2410_UFSTAT);
-		return (ufstat & info->tx_fifofull) ? 0 : 1;
-	}
-
-	/* in non-fifo mode, we go and use the tx buffer empty */
-
-	utrstat = rd_regl(port, S3C2410_UTRSTAT);
-	return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
-}
-
-static void
-s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
-{
-	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
-	while (!s3c24xx_serial_console_txrdy(port, ufcon))
-		barrier();
-	wr_regb(cons_uart, S3C2410_UTXH, ch);
-}
-
-static void
-s3c24xx_serial_console_write(struct console *co, const char *s,
-			     unsigned int count)
-{
-	uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
-}
-
-static void __init
-s3c24xx_serial_get_options(struct uart_port *port, int *baud,
-			   int *parity, int *bits)
-{
-	struct s3c24xx_uart_clksrc clksrc;
-	struct clk *clk;
-	unsigned int ulcon;
-	unsigned int ucon;
-	unsigned int ubrdiv;
-	unsigned long rate;
-
-	ulcon  = rd_regl(port, S3C2410_ULCON);
-	ucon   = rd_regl(port, S3C2410_UCON);
-	ubrdiv = rd_regl(port, S3C2410_UBRDIV);
-
-	dbg("s3c24xx_serial_get_options: port=%p\n"
-	    "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
-	    port, ulcon, ucon, ubrdiv);
-
-	if ((ucon & 0xf) != 0) {
-		/* consider the serial port configured if the tx/rx mode set */
-
-		switch (ulcon & S3C2410_LCON_CSMASK) {
-		case S3C2410_LCON_CS5:
-			*bits = 5;
-			break;
-		case S3C2410_LCON_CS6:
-			*bits = 6;
-			break;
-		case S3C2410_LCON_CS7:
-			*bits = 7;
-			break;
-		default:
-		case S3C2410_LCON_CS8:
-			*bits = 8;
-			break;
-		}
-
-		switch (ulcon & S3C2410_LCON_PMASK) {
-		case S3C2410_LCON_PEVEN:
-			*parity = 'e';
-			break;
-
-		case S3C2410_LCON_PODD:
-			*parity = 'o';
-			break;
-
-		case S3C2410_LCON_PNONE:
-		default:
-			*parity = 'n';
-		}
-
-		/* now calculate the baud rate */
-
-		s3c24xx_serial_getsource(port, &clksrc);
-
-		clk = clk_get(port->dev, clksrc.name);
-		if (!IS_ERR(clk) && clk != NULL)
-			rate = clk_get_rate(clk) / clksrc.divisor;
-		else
-			rate = 1;
-
-
-		*baud = rate / ( 16 * (ubrdiv + 1));
-		dbg("calculated baud %d\n", *baud);
-	}
-
-}
-
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
-{
-	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
-	struct platform_device **platdev_ptr;
-	int i;
-
-	dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
-	platdev_ptr = s3c24xx_uart_devs;
-
-	for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
-	}
-
-	return 0;
-}
-
-static int __init
-s3c24xx_serial_console_setup(struct console *co, char *options)
-{
-	struct uart_port *port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
-	    co, co->index, options);
-
-	/* is this a valid port */
-
-	if (co->index == -1 || co->index >= NR_PORTS)
-		co->index = 0;
-
-	port = &s3c24xx_serial_ports[co->index].port;
-
-	/* is the port configured? */
-
-	if (port->mapbase == 0x0) {
-		co->index = 0;
-		port = &s3c24xx_serial_ports[co->index].port;
-	}
-
-	cons_uart = port;
-
-	dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		s3c24xx_serial_get_options(port, &baud, &parity, &bits);
-
-	dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
-
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
-static struct console s3c24xx_serial_console =
-{
-	.name		= S3C24XX_SERIAL_NAME,
-	.device		= uart_console_device,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.write		= s3c24xx_serial_console_write,
-	.setup		= s3c24xx_serial_console_setup
-};
-
-static int s3c24xx_serial_initconsole(void)
-{
-	struct s3c24xx_uart_info *info;
-	struct platform_device *dev = s3c24xx_uart_devs[0];
-
-	dbg("s3c24xx_serial_initconsole\n");
-
-	/* select driver based on the cpu */
-
-	if (dev == NULL) {
-		printk(KERN_ERR "s3c24xx: no devices for console init\n");
-		return 0;
-	}
-
-	if (strcmp(dev->name, "s3c2400-uart") == 0) {
-		info = s3c2400_uart_inf_at;
-	} else if (strcmp(dev->name, "s3c2410-uart") == 0) {
-		info = s3c2410_uart_inf_at;
-	} else if (strcmp(dev->name, "s3c2440-uart") == 0) {
-		info = s3c2440_uart_inf_at;
-	} else if (strcmp(dev->name, "s3c2412-uart") == 0) {
-		info = s3c2412_uart_inf_at;
-	} else {
-		printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
-		return 0;
-	}
-
-	if (info == NULL) {
-		printk(KERN_ERR "s3c24xx: no driver for console\n");
-		return 0;
-	}
-
-	s3c24xx_serial_console.data = &s3c24xx_uart_drv;
-	s3c24xx_serial_init_ports(info);
-
-	register_console(&s3c24xx_serial_console);
-	return 0;
-}
-
-console_initcall(s3c24xx_serial_initconsole);
-
-#endif /* CONFIG_SERIAL_S3C2410_CONSOLE */
+module_init(s3c2410_serial_init);
+module_exit(s3c2410_serial_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver");
-MODULE_ALIAS("platform:s3c2400-uart");
+MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver");
 MODULE_ALIAS("platform:s3c2410-uart");
-MODULE_ALIAS("platform:s3c2412-uart");
-MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
new file mode 100644
index 000000000000..ce0c220e3e92
--- /dev/null
+++ b/drivers/serial/s3c2412.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c2412.c
+ *
+ * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c2412_serial_setsource(struct uart_port *port,
+				     struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	ucon &= ~S3C2412_UCON_CLKMASK;
+
+	if (strcmp(clk->name, "uclk") == 0)
+		ucon |= S3C2440_UCON_UCLK;
+	else if (strcmp(clk->name, "pclk") == 0)
+		ucon |= S3C2440_UCON_PCLK;
+	else if (strcmp(clk->name, "usysclk") == 0)
+		ucon |= S3C2412_UCON_USYSCLK;
+	else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s3c2412_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	switch (ucon & S3C2412_UCON_CLKMASK) {
+	case S3C2412_UCON_UCLK:
+		clk->divisor = 1;
+		clk->name = "uclk";
+		break;
+
+	case S3C2412_UCON_PCLK:
+	case S3C2412_UCON_PCLK2:
+		clk->divisor = 1;
+		clk->name = "pclk";
+		break;
+
+	case S3C2412_UCON_USYSCLK:
+		clk->divisor = 1;
+		clk->name = "usysclk";
+		break;
+	}
+
+	return 0;
+}
+
+static int s3c2412_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	dbg("%s: port=%p (%08lx), cfg=%p\n",
+	    __func__, port, port->mapbase, cfg);
+
+	/* ensure we don't change the clock settings... */
+
+	ucon &= S3C2412_UCON_CLKMASK;
+
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c2412_uart_inf = {
+	.name		= "Samsung S3C2412 UART",
+	.type		= PORT_S3C2412,
+	.fifosize	= 64,
+	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c2412_serial_getsource,
+	.set_clksrc	= s3c2412_serial_setsource,
+	.reset_port	= s3c2412_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2412_serial_probe(struct platform_device *dev)
+{
+	dbg("s3c2440_serial_probe: dev=%p\n", dev);
+	return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
+}
+
+static struct platform_driver s3c2412_serial_drv = {
+	.probe		= s3c2412_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c2412-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+
+static inline int s3c2412_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+}
+
+static inline void s3c2412_serial_exit(void)
+{
+	platform_driver_unregister(&s3c2412_serial_drv);
+}
+
+module_init(s3c2412_serial_init);
+module_exit(s3c2412_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c2412-uart");
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
new file mode 100644
index 000000000000..38f954bd39c6
--- /dev/null
+++ b/drivers/serial/s3c2440.c
@@ -0,0 +1,181 @@
+/* linux/drivers/serial/s3c2440.c
+ *
+ * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+
+static int s3c2440_serial_setsource(struct uart_port *port,
+				     struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	/* todo - proper fclk<>nonfclk switch. */
+
+	ucon &= ~S3C2440_UCON_CLKMASK;
+
+	if (strcmp(clk->name, "uclk") == 0)
+		ucon |= S3C2440_UCON_UCLK;
+	else if (strcmp(clk->name, "pclk") == 0)
+		ucon |= S3C2440_UCON_PCLK;
+	else if (strcmp(clk->name, "fclk") == 0)
+		ucon |= S3C2440_UCON_FCLK;
+	else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s3c2440_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+	unsigned long ucon0, ucon1, ucon2;
+
+	switch (ucon & S3C2440_UCON_CLKMASK) {
+	case S3C2440_UCON_UCLK:
+		clk->divisor = 1;
+		clk->name = "uclk";
+		break;
+
+	case S3C2440_UCON_PCLK:
+	case S3C2440_UCON_PCLK2:
+		clk->divisor = 1;
+		clk->name = "pclk";
+		break;
+
+	case S3C2440_UCON_FCLK:
+		/* the fun of calculating the uart divisors on
+		 * the s3c2440 */
+
+		ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+		ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+		ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+		printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
+
+		ucon0 &= S3C2440_UCON0_DIVMASK;
+		ucon1 &= S3C2440_UCON1_DIVMASK;
+		ucon2 &= S3C2440_UCON2_DIVMASK;
+
+		if (ucon0 != 0) {
+			clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
+			clk->divisor += 6;
+		} else if (ucon1 != 0) {
+			clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
+			clk->divisor += 21;
+		} else if (ucon2 != 0) {
+			clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
+			clk->divisor += 36;
+		} else {
+			/* manual calims 44, seems to be 9 */
+			clk->divisor = 9;
+		}
+
+		clk->name = "fclk";
+		break;
+	}
+
+	return 0;
+}
+
+static int s3c2440_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	/* ensure we don't change the clock settings... */
+
+	ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
+
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c2440_uart_inf = {
+	.name		= "Samsung S3C2440 UART",
+	.type		= PORT_S3C2440,
+	.fifosize	= 64,
+	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c2440_serial_getsource,
+	.set_clksrc	= s3c2440_serial_setsource,
+	.reset_port	= s3c2440_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2440_serial_probe(struct platform_device *dev)
+{
+	dbg("s3c2440_serial_probe: dev=%p\n", dev);
+	return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+}
+
+static struct platform_driver s3c2440_serial_drv = {
+	.probe		= s3c2440_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c2440-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+
+static int __init s3c2440_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+}
+
+static void __exit s3c2440_serial_exit(void)
+{
+	platform_driver_unregister(&s3c2440_serial_drv);
+}
+
+module_init(s3c2440_serial_init);
+module_exit(s3c2440_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPLi v2");
+MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
new file mode 100644
index 000000000000..4a3ecaa629e6
--- /dev/null
+++ b/drivers/serial/samsung.c
@@ -0,0 +1,1317 @@
+/* linux/drivers/serial/samsuing.c
+ *
+ * Driver core for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Hote on 2410 error handling
+ *
+ * The s3c2410 manual has a love/hate affair with the contents of the
+ * UERSTAT register in the UART blocks, and keeps marking some of the
+ * error bits as reserved. Having checked with the s3c2410x01,
+ * it copes with BREAKs properly, so I am happy to ignore the RESERVED
+ * feature from the latter versions of the manual.
+ *
+ * If it becomes aparrent that latter versions of the 2410 remove these
+ * bits, then action will have to be taken to differentiate the versions
+ * and change the policy on BREAK
+ *
+ * BJD, 04-Nov-2004
+*/
+
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/irq.h>
+
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+/* UART name and device definitions */
+
+#define S3C24XX_SERIAL_NAME	"ttySAC"
+#define S3C24XX_SERIAL_MAJOR	204
+#define S3C24XX_SERIAL_MINOR	64
+
+/* we can support 3 uarts, but not always use them */
+
+#ifdef CONFIG_CPU_S3C2400
+#define NR_PORTS (2)
+#else
+#define NR_PORTS (3)
+#endif
+
+/* port irq numbers */
+
+#define TX_IRQ(port) ((port)->irq + 1)
+#define RX_IRQ(port) ((port)->irq)
+
+/* macros to change one thing to another */
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+/* flag to ignore all characters comming in */
+#define RXSTAT_DUMMY_READ (0x10000000)
+
+static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
+{
+	return container_of(port, struct s3c24xx_uart_port, port);
+}
+
+/* translate a port to the device name */
+
+static inline const char *s3c24xx_serial_portname(struct uart_port *port)
+{
+	return to_platform_device(port->dev)->name;
+}
+
+static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
+{
+	return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
+}
+
+static void s3c24xx_serial_rx_enable(struct uart_port *port)
+{
+	unsigned long flags;
+	unsigned int ucon, ufcon;
+	int count = 10000;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	while (--count && !s3c24xx_serial_txempty_nofifo(port))
+		udelay(100);
+
+	ufcon = rd_regl(port, S3C2410_UFCON);
+	ufcon |= S3C2410_UFCON_RESETRX;
+	wr_regl(port, S3C2410_UFCON, ufcon);
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon |= S3C2410_UCON_RXIRQMODE;
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	rx_enabled(port) = 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_rx_disable(struct uart_port *port)
+{
+	unsigned long flags;
+	unsigned int ucon;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~S3C2410_UCON_RXIRQMODE;
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	rx_enabled(port) = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_stop_tx(struct uart_port *port)
+{
+	if (tx_enabled(port)) {
+		disable_irq(TX_IRQ(port));
+		tx_enabled(port) = 0;
+		if (port->flags & UPF_CONS_FLOW)
+			s3c24xx_serial_rx_enable(port);
+	}
+}
+
+static void s3c24xx_serial_start_tx(struct uart_port *port)
+{
+	if (!tx_enabled(port)) {
+		if (port->flags & UPF_CONS_FLOW)
+			s3c24xx_serial_rx_disable(port);
+
+		enable_irq(TX_IRQ(port));
+		tx_enabled(port) = 1;
+	}
+}
+
+
+static void s3c24xx_serial_stop_rx(struct uart_port *port)
+{
+	if (rx_enabled(port)) {
+		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
+		disable_irq(RX_IRQ(port));
+		rx_enabled(port) = 0;
+	}
+}
+
+static void s3c24xx_serial_enable_ms(struct uart_port *port)
+{
+}
+
+static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
+{
+	return to_ourport(port)->info;
+}
+
+static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
+{
+	if (port->dev == NULL)
+		return NULL;
+
+	return (struct s3c2410_uartcfg *)port->dev->platform_data;
+}
+
+static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
+				     unsigned long ufstat)
+{
+	struct s3c24xx_uart_info *info = ourport->info;
+
+	if (ufstat & info->rx_fifofull)
+		return info->fifosize;
+
+	return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
+}
+
+
+/* ? - where has parity gone?? */
+#define S3C2410_UERSTAT_PARITY (0x1000)
+
+static irqreturn_t
+s3c24xx_serial_rx_chars(int irq, void *dev_id)
+{
+	struct s3c24xx_uart_port *ourport = dev_id;
+	struct uart_port *port = &ourport->port;
+	struct tty_struct *tty = port->info->tty;
+	unsigned int ufcon, ch, flag, ufstat, uerstat;
+	int max_count = 64;
+
+	while (max_count-- > 0) {
+		ufcon = rd_regl(port, S3C2410_UFCON);
+		ufstat = rd_regl(port, S3C2410_UFSTAT);
+
+		if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
+			break;
+
+		uerstat = rd_regl(port, S3C2410_UERSTAT);
+		ch = rd_regb(port, S3C2410_URXH);
+
+		if (port->flags & UPF_CONS_FLOW) {
+			int txe = s3c24xx_serial_txempty_nofifo(port);
+
+			if (rx_enabled(port)) {
+				if (!txe) {
+					rx_enabled(port) = 0;
+					continue;
+				}
+			} else {
+				if (txe) {
+					ufcon |= S3C2410_UFCON_RESETRX;
+					wr_regl(port, S3C2410_UFCON, ufcon);
+					rx_enabled(port) = 1;
+					goto out;
+				}
+				continue;
+			}
+		}
+
+		/* insert the character into the buffer */
+
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
+			dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
+			    ch, uerstat);
+
+			/* check for break */
+			if (uerstat & S3C2410_UERSTAT_BREAK) {
+				dbg("break!\n");
+				port->icount.brk++;
+				if (uart_handle_break(port))
+				    goto ignore_char;
+			}
+
+			if (uerstat & S3C2410_UERSTAT_FRAME)
+				port->icount.frame++;
+			if (uerstat & S3C2410_UERSTAT_OVERRUN)
+				port->icount.overrun++;
+
+			uerstat &= port->read_status_mask;
+
+			if (uerstat & S3C2410_UERSTAT_BREAK)
+				flag = TTY_BREAK;
+			else if (uerstat & S3C2410_UERSTAT_PARITY)
+				flag = TTY_PARITY;
+			else if (uerstat & (S3C2410_UERSTAT_FRAME |
+					    S3C2410_UERSTAT_OVERRUN))
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			goto ignore_char;
+
+		uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
+				 ch, flag);
+
+ ignore_char:
+		continue;
+	}
+	tty_flip_buffer_push(tty);
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
+{
+	struct s3c24xx_uart_port *ourport = id;
+	struct uart_port *port = &ourport->port;
+	struct circ_buf *xmit = &port->info->xmit;
+	int count = 256;
+
+	if (port->x_char) {
+		wr_regb(port, S3C2410_UTXH, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		goto out;
+	}
+
+	/* if there isnt anything more to transmit, or the uart is now
+	 * stopped, disable the uart and exit
+	*/
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		s3c24xx_serial_stop_tx(port);
+		goto out;
+	}
+
+	/* try and drain the buffer... */
+
+	while (!uart_circ_empty(xmit) && count-- > 0) {
+		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
+			break;
+
+		wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		s3c24xx_serial_stop_tx(port);
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
+	unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
+
+	if (ufcon & S3C2410_UFCON_FIFOMODE) {
+		if ((ufstat & info->tx_fifomask) != 0 ||
+		    (ufstat & info->tx_fifofull))
+			return 0;
+
+		return 1;
+	}
+
+	return s3c24xx_serial_txempty_nofifo(port);
+}
+
+/* no modem control lines */
+static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
+{
+	unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
+
+	if (umstat & S3C2410_UMSTAT_CTS)
+		return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+	else
+		return TIOCM_CAR | TIOCM_DSR;
+}
+
+static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* todo - possibly remove AFC and do manual CTS */
+}
+
+static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long flags;
+	unsigned int ucon;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ucon = rd_regl(port, S3C2410_UCON);
+
+	if (break_state)
+		ucon |= S3C2410_UCON_SBREAK;
+	else
+		ucon &= ~S3C2410_UCON_SBREAK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_shutdown(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	if (ourport->tx_claimed) {
+		free_irq(TX_IRQ(port), ourport);
+		tx_enabled(port) = 0;
+		ourport->tx_claimed = 0;
+	}
+
+	if (ourport->rx_claimed) {
+		free_irq(RX_IRQ(port), ourport);
+		ourport->rx_claimed = 0;
+		rx_enabled(port) = 0;
+	}
+}
+
+
+static int s3c24xx_serial_startup(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	int ret;
+
+	dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
+	    port->mapbase, port->membase);
+
+	rx_enabled(port) = 1;
+
+	ret = request_irq(RX_IRQ(port),
+			  s3c24xx_serial_rx_chars, 0,
+			  s3c24xx_serial_portname(port), ourport);
+
+	if (ret != 0) {
+		printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+		return ret;
+	}
+
+	ourport->rx_claimed = 1;
+
+	dbg("requesting tx irq...\n");
+
+	tx_enabled(port) = 1;
+
+	ret = request_irq(TX_IRQ(port),
+			  s3c24xx_serial_tx_chars, 0,
+			  s3c24xx_serial_portname(port), ourport);
+
+	if (ret) {
+		printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+		goto err;
+	}
+
+	ourport->tx_claimed = 1;
+
+	dbg("s3c24xx_serial_startup ok\n");
+
+	/* the port reset code should have done the correct
+	 * register setup for the port controls */
+
+	return ret;
+
+ err:
+	s3c24xx_serial_shutdown(port);
+	return ret;
+}
+
+/* power power management control */
+
+static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
+			      unsigned int old)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	switch (level) {
+	case 3:
+		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+			clk_disable(ourport->baudclk);
+
+		clk_disable(ourport->clk);
+		break;
+
+	case 0:
+		clk_enable(ourport->clk);
+
+		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+			clk_enable(ourport->baudclk);
+
+		break;
+	default:
+		printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
+	}
+}
+
+/* baud rate calculation
+ *
+ * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
+ * of different sources, including the peripheral clock ("pclk") and an
+ * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
+ * with a programmable extra divisor.
+ *
+ * The following code goes through the clock sources, and calculates the
+ * baud clocks (and the resultant actual baud rates) and then tries to
+ * pick the closest one and select that.
+ *
+*/
+
+
+#define MAX_CLKS (8)
+
+static struct s3c24xx_uart_clksrc tmp_clksrc = {
+	.name		= "pclk",
+	.min_baud	= 0,
+	.max_baud	= 0,
+	.divisor	= 1,
+};
+
+static inline int
+s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	return (info->get_clksrc)(port, c);
+}
+
+static inline int
+s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	return (info->set_clksrc)(port, c);
+}
+
+struct baud_calc {
+	struct s3c24xx_uart_clksrc	*clksrc;
+	unsigned int			 calc;
+	unsigned int			 quot;
+	struct clk			*src;
+};
+
+static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
+				   struct uart_port *port,
+				   struct s3c24xx_uart_clksrc *clksrc,
+				   unsigned int baud)
+{
+	unsigned long rate;
+
+	calc->src = clk_get(port->dev, clksrc->name);
+	if (calc->src == NULL || IS_ERR(calc->src))
+		return 0;
+
+	rate = clk_get_rate(calc->src);
+	rate /= clksrc->divisor;
+
+	calc->clksrc = clksrc;
+	calc->quot = (rate + (8 * baud)) / (16 * baud);
+	calc->calc = (rate / (calc->quot * 16));
+
+	calc->quot--;
+	return 1;
+}
+
+static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
+					  struct s3c24xx_uart_clksrc **clksrc,
+					  struct clk **clk,
+					  unsigned int baud)
+{
+	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+	struct s3c24xx_uart_clksrc *clkp;
+	struct baud_calc res[MAX_CLKS];
+	struct baud_calc *resptr, *best, *sptr;
+	int i;
+
+	clkp = cfg->clocks;
+	best = NULL;
+
+	if (cfg->clocks_size < 2) {
+		if (cfg->clocks_size == 0)
+			clkp = &tmp_clksrc;
+
+		/* check to see if we're sourcing fclk, and if so we're
+		 * going to have to update the clock source
+		 */
+
+		if (strcmp(clkp->name, "fclk") == 0) {
+			struct s3c24xx_uart_clksrc src;
+
+			s3c24xx_serial_getsource(port, &src);
+
+			/* check that the port already using fclk, and if
+			 * not, then re-select fclk
+			 */
+
+			if (strcmp(src.name, clkp->name) == 0) {
+				s3c24xx_serial_setsource(port, clkp);
+				s3c24xx_serial_getsource(port, &src);
+			}
+
+			clkp->divisor = src.divisor;
+		}
+
+		s3c24xx_serial_calcbaud(res, port, clkp, baud);
+		best = res;
+		resptr = best + 1;
+	} else {
+		resptr = res;
+
+		for (i = 0; i < cfg->clocks_size; i++, clkp++) {
+			if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
+				resptr++;
+		}
+	}
+
+	/* ok, we now need to select the best clock we found */
+
+	if (!best) {
+		unsigned int deviation = (1<<30)|((1<<30)-1);
+		int calc_deviation;
+
+		for (sptr = res; sptr < resptr; sptr++) {
+			calc_deviation = baud - sptr->calc;
+			if (calc_deviation < 0)
+				calc_deviation = -calc_deviation;
+
+			if (calc_deviation < deviation) {
+				best = sptr;
+				deviation = calc_deviation;
+			}
+		}
+	}
+
+	/* store results to pass back */
+
+	*clksrc = best->clksrc;
+	*clk    = best->src;
+
+	return best->quot;
+}
+
+static void s3c24xx_serial_set_termios(struct uart_port *port,
+				       struct ktermios *termios,
+				       struct ktermios *old)
+{
+	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	struct s3c24xx_uart_clksrc *clksrc = NULL;
+	struct clk *clk = NULL;
+	unsigned long flags;
+	unsigned int baud, quot;
+	unsigned int ulcon;
+	unsigned int umcon;
+
+	/*
+	 * We don't support modem control lines.
+	 */
+	termios->c_cflag &= ~(HUPCL | CMSPAR);
+	termios->c_cflag |= CLOCAL;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+
+	baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
+
+	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+		quot = port->custom_divisor;
+	else
+		quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+
+	/* check to see if we need  to change clock source */
+
+	if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+		s3c24xx_serial_setsource(port, clksrc);
+
+		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+			clk_disable(ourport->baudclk);
+			ourport->baudclk  = NULL;
+		}
+
+		clk_enable(clk);
+
+		ourport->clksrc = clksrc;
+		ourport->baudclk = clk;
+	}
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		dbg("config: 5bits/char\n");
+		ulcon = S3C2410_LCON_CS5;
+		break;
+	case CS6:
+		dbg("config: 6bits/char\n");
+		ulcon = S3C2410_LCON_CS6;
+		break;
+	case CS7:
+		dbg("config: 7bits/char\n");
+		ulcon = S3C2410_LCON_CS7;
+		break;
+	case CS8:
+	default:
+		dbg("config: 8bits/char\n");
+		ulcon = S3C2410_LCON_CS8;
+		break;
+	}
+
+	/* preserve original lcon IR settings */
+	ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
+
+	if (termios->c_cflag & CSTOPB)
+		ulcon |= S3C2410_LCON_STOPB;
+
+	umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
+
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & PARODD)
+			ulcon |= S3C2410_LCON_PODD;
+		else
+			ulcon |= S3C2410_LCON_PEVEN;
+	} else {
+		ulcon |= S3C2410_LCON_PNONE;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+
+	wr_regl(port, S3C2410_ULCON, ulcon);
+	wr_regl(port, S3C2410_UBRDIV, quot);
+	wr_regl(port, S3C2410_UMCON, umcon);
+
+	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+	    rd_regl(port, S3C2410_ULCON),
+	    rd_regl(port, S3C2410_UCON),
+	    rd_regl(port, S3C2410_UFCON));
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	/*
+	 * Which character status flags are we interested in?
+	 */
+	port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
+
+	/*
+	 * Which character status flags should we ignore?
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
+	if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= RXSTAT_DUMMY_READ;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *s3c24xx_serial_type(struct uart_port *port)
+{
+	switch (port->type) {
+	case PORT_S3C2410:
+		return "S3C2410";
+	case PORT_S3C2440:
+		return "S3C2440";
+	case PORT_S3C2412:
+		return "S3C2412";
+	default:
+		return NULL;
+	}
+}
+
+#define MAP_SIZE (0x100)
+
+static void s3c24xx_serial_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, MAP_SIZE);
+}
+
+static int s3c24xx_serial_request_port(struct uart_port *port)
+{
+	const char *name = s3c24xx_serial_portname(port);
+	return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
+}
+
+static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	if (flags & UART_CONFIG_TYPE &&
+	    s3c24xx_serial_request_port(port) == 0)
+		port->type = info->type;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int
+s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	if (ser->type != PORT_UNKNOWN && ser->type != info->type)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+static struct console s3c24xx_serial_console;
+
+#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
+#else
+#define S3C24XX_SERIAL_CONSOLE NULL
+#endif
+
+static struct uart_ops s3c24xx_serial_ops = {
+	.pm		= s3c24xx_serial_pm,
+	.tx_empty	= s3c24xx_serial_tx_empty,
+	.get_mctrl	= s3c24xx_serial_get_mctrl,
+	.set_mctrl	= s3c24xx_serial_set_mctrl,
+	.stop_tx	= s3c24xx_serial_stop_tx,
+	.start_tx	= s3c24xx_serial_start_tx,
+	.stop_rx	= s3c24xx_serial_stop_rx,
+	.enable_ms	= s3c24xx_serial_enable_ms,
+	.break_ctl	= s3c24xx_serial_break_ctl,
+	.startup	= s3c24xx_serial_startup,
+	.shutdown	= s3c24xx_serial_shutdown,
+	.set_termios	= s3c24xx_serial_set_termios,
+	.type		= s3c24xx_serial_type,
+	.release_port	= s3c24xx_serial_release_port,
+	.request_port	= s3c24xx_serial_request_port,
+	.config_port	= s3c24xx_serial_config_port,
+	.verify_port	= s3c24xx_serial_verify_port,
+};
+
+
+static struct uart_driver s3c24xx_uart_drv = {
+	.owner		= THIS_MODULE,
+	.dev_name	= "s3c2410_serial",
+	.nr		= 3,
+	.cons		= S3C24XX_SERIAL_CONSOLE,
+	.driver_name	= S3C24XX_SERIAL_NAME,
+	.major		= S3C24XX_SERIAL_MAJOR,
+	.minor		= S3C24XX_SERIAL_MINOR,
+};
+
+static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+	[0] = {
+		.port = {
+			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
+			.iotype		= UPIO_MEM,
+			.irq		= IRQ_S3CUART_RX0,
+			.uartclk	= 0,
+			.fifosize	= 16,
+			.ops		= &s3c24xx_serial_ops,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 0,
+		}
+	},
+	[1] = {
+		.port = {
+			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
+			.iotype		= UPIO_MEM,
+			.irq		= IRQ_S3CUART_RX1,
+			.uartclk	= 0,
+			.fifosize	= 16,
+			.ops		= &s3c24xx_serial_ops,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 1,
+		}
+	},
+#if NR_PORTS > 2
+
+	[2] = {
+		.port = {
+			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
+			.iotype		= UPIO_MEM,
+			.irq		= IRQ_S3CUART_RX2,
+			.uartclk	= 0,
+			.fifosize	= 16,
+			.ops		= &s3c24xx_serial_ops,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 2,
+		}
+	}
+#endif
+};
+
+/* s3c24xx_serial_resetport
+ *
+ * wrapper to call the specific reset for this port (reset the fifos
+ * and the settings)
+*/
+
+static inline int s3c24xx_serial_resetport(struct uart_port *port,
+					   struct s3c2410_uartcfg *cfg)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	return (info->reset_port)(port, cfg);
+}
+
+/* s3c24xx_serial_init_port
+ *
+ * initialise a single serial port from the platform device given
+ */
+
+static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
+				    struct s3c24xx_uart_info *info,
+				    struct platform_device *platdev)
+{
+	struct uart_port *port = &ourport->port;
+	struct s3c2410_uartcfg *cfg;
+	struct resource *res;
+	int ret;
+
+	dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
+
+	if (platdev == NULL)
+		return -ENODEV;
+
+	cfg = s3c24xx_dev_to_cfg(&platdev->dev);
+
+	if (port->mapbase != 0)
+		return 0;
+
+	if (cfg->hwport > 3)
+		return -EINVAL;
+
+	/* setup info for port */
+	port->dev	= &platdev->dev;
+	ourport->info	= info;
+
+	/* copy the info in from provided structure */
+	ourport->port.fifosize = info->fifosize;
+
+	dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
+
+	port->uartclk = 1;
+
+	if (cfg->uart_flags & UPF_CONS_FLOW) {
+		dbg("s3c24xx_serial_init_port: enabling flow control\n");
+		port->flags |= UPF_CONS_FLOW;
+	}
+
+	/* sort our the physical and virtual addresses for each UART */
+
+	res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		printk(KERN_ERR "failed to find memory resource for uart\n");
+		return -EINVAL;
+	}
+
+	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
+
+	port->mapbase	= res->start;
+	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+	ret = platform_get_irq(platdev, 0);
+	if (ret < 0)
+		port->irq = 0;
+	else
+		port->irq = ret;
+
+	ourport->clk	= clk_get(&platdev->dev, "uart");
+
+	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
+	    port->mapbase, port->membase, port->irq, port->uartclk);
+
+	/* reset the fifos (and setup the uart) */
+	s3c24xx_serial_resetport(port, cfg);
+	return 0;
+}
+
+static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+}
+
+static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
+
+/* Device driver serial port probe */
+
+static int probe_index;
+
+int s3c24xx_serial_probe(struct platform_device *dev,
+			 struct s3c24xx_uart_info *info)
+{
+	struct s3c24xx_uart_port *ourport;
+	int ret;
+
+	dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+
+	ourport = &s3c24xx_serial_ports[probe_index];
+	probe_index++;
+
+	dbg("%s: initialising port %p...\n", __func__, ourport);
+
+	ret = s3c24xx_serial_init_port(ourport, info, dev);
+	if (ret < 0)
+		goto probe_err;
+
+	dbg("%s: adding port\n", __func__);
+	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
+	platform_set_drvdata(dev, &ourport->port);
+
+	ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+	if (ret < 0)
+		printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+
+	return 0;
+
+ probe_err:
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
+
+int s3c24xx_serial_remove(struct platform_device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+
+	if (port) {
+		device_remove_file(&dev->dev, &dev_attr_clock_source);
+		uart_remove_one_port(&s3c24xx_uart_drv, port);
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
+
+/* UART power management code */
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+
+	if (port)
+		uart_suspend_port(&s3c24xx_uart_drv, port);
+
+	return 0;
+}
+
+static int s3c24xx_serial_resume(struct platform_device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	if (port) {
+		clk_enable(ourport->clk);
+		s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
+		clk_disable(ourport->clk);
+
+		uart_resume_port(&s3c24xx_uart_drv, port);
+	}
+
+	return 0;
+}
+#endif
+
+int s3c24xx_serial_init(struct platform_driver *drv,
+			struct s3c24xx_uart_info *info)
+{
+	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
+
+#ifdef CONFIG_PM
+	drv->suspend = s3c24xx_serial_suspend;
+	drv->resume = s3c24xx_serial_resume;
+#endif
+
+	return platform_driver_register(drv);
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&s3c24xx_uart_drv);
+	if (ret < 0) {
+		printk(KERN_ERR "failed to register UART driver\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void __exit s3c24xx_serial_modexit(void)
+{
+	uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
+
+/* Console code */
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+static struct uart_port *cons_uart;
+
+static int
+s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+{
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ufstat, utrstat;
+
+	if (ufcon & S3C2410_UFCON_FIFOMODE) {
+		/* fifo mode - check ammount of data in fifo registers... */
+
+		ufstat = rd_regl(port, S3C2410_UFSTAT);
+		return (ufstat & info->tx_fifofull) ? 0 : 1;
+	}
+
+	/* in non-fifo mode, we go and use the tx buffer empty */
+
+	utrstat = rd_regl(port, S3C2410_UTRSTAT);
+	return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
+}
+
+static void
+s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
+{
+	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+	while (!s3c24xx_serial_console_txrdy(port, ufcon))
+		barrier();
+	wr_regb(cons_uart, S3C2410_UTXH, ch);
+}
+
+static void
+s3c24xx_serial_console_write(struct console *co, const char *s,
+			     unsigned int count)
+{
+	uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
+}
+
+static void __init
+s3c24xx_serial_get_options(struct uart_port *port, int *baud,
+			   int *parity, int *bits)
+{
+	struct s3c24xx_uart_clksrc clksrc;
+	struct clk *clk;
+	unsigned int ulcon;
+	unsigned int ucon;
+	unsigned int ubrdiv;
+	unsigned long rate;
+
+	ulcon  = rd_regl(port, S3C2410_ULCON);
+	ucon   = rd_regl(port, S3C2410_UCON);
+	ubrdiv = rd_regl(port, S3C2410_UBRDIV);
+
+	dbg("s3c24xx_serial_get_options: port=%p\n"
+	    "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
+	    port, ulcon, ucon, ubrdiv);
+
+	if ((ucon & 0xf) != 0) {
+		/* consider the serial port configured if the tx/rx mode set */
+
+		switch (ulcon & S3C2410_LCON_CSMASK) {
+		case S3C2410_LCON_CS5:
+			*bits = 5;
+			break;
+		case S3C2410_LCON_CS6:
+			*bits = 6;
+			break;
+		case S3C2410_LCON_CS7:
+			*bits = 7;
+			break;
+		default:
+		case S3C2410_LCON_CS8:
+			*bits = 8;
+			break;
+		}
+
+		switch (ulcon & S3C2410_LCON_PMASK) {
+		case S3C2410_LCON_PEVEN:
+			*parity = 'e';
+			break;
+
+		case S3C2410_LCON_PODD:
+			*parity = 'o';
+			break;
+
+		case S3C2410_LCON_PNONE:
+		default:
+			*parity = 'n';
+		}
+
+		/* now calculate the baud rate */
+
+		s3c24xx_serial_getsource(port, &clksrc);
+
+		clk = clk_get(port->dev, clksrc.name);
+		if (!IS_ERR(clk) && clk != NULL)
+			rate = clk_get_rate(clk) / clksrc.divisor;
+		else
+			rate = 1;
+
+
+		*baud = rate / (16 * (ubrdiv + 1));
+		dbg("calculated baud %d\n", *baud);
+	}
+
+}
+
+/* s3c24xx_serial_init_ports
+ *
+ * initialise the serial ports from the machine provided initialisation
+ * data.
+*/
+
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+{
+	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
+	struct platform_device **platdev_ptr;
+	int i;
+
+	dbg("s3c24xx_serial_init_ports: initialising ports...\n");
+
+	platdev_ptr = s3c24xx_uart_devs;
+
+	for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+	}
+
+	return 0;
+}
+
+static int __init
+s3c24xx_serial_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
+	    co, co->index, options);
+
+	/* is this a valid port */
+
+	if (co->index == -1 || co->index >= NR_PORTS)
+		co->index = 0;
+
+	port = &s3c24xx_serial_ports[co->index].port;
+
+	/* is the port configured? */
+
+	if (port->mapbase == 0x0) {
+		co->index = 0;
+		port = &s3c24xx_serial_ports[co->index].port;
+	}
+
+	cons_uart = port;
+
+	dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		s3c24xx_serial_get_options(port, &baud, &parity, &bits);
+
+	dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+/* s3c24xx_serial_initconsole
+ *
+ * initialise the console from one of the uart drivers
+*/
+
+static struct console s3c24xx_serial_console = {
+	.name		= S3C24XX_SERIAL_NAME,
+	.device		= uart_console_device,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.write		= s3c24xx_serial_console_write,
+	.setup		= s3c24xx_serial_console_setup
+};
+
+int s3c24xx_serial_initconsole(struct platform_driver *drv,
+			       struct s3c24xx_uart_info *info)
+
+{
+	struct platform_device *dev = s3c24xx_uart_devs[0];
+
+	dbg("s3c24xx_serial_initconsole\n");
+
+	/* select driver based on the cpu */
+
+	if (dev == NULL) {
+		printk(KERN_ERR "s3c24xx: no devices for console init\n");
+		return 0;
+	}
+
+	if (strcmp(dev->name, drv->driver.name) != 0)
+		return 0;
+
+	s3c24xx_serial_console.data = &s3c24xx_uart_drv;
+	s3c24xx_serial_init_ports(info);
+
+	register_console(&s3c24xx_serial_console);
+	return 0;
+}
+
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+
+MODULE_DESCRIPTION("Samsung SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
new file mode 100644
index 000000000000..5c92ebbe7d9e
--- /dev/null
+++ b/drivers/serial/samsung.h
@@ -0,0 +1,102 @@
+/* linux/drivers/serial/samsung.h
+ *
+ * Driver for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c24xx_uart_info {
+	char			*name;
+	unsigned int		type;
+	unsigned int		fifosize;
+	unsigned long		rx_fifomask;
+	unsigned long		rx_fifoshift;
+	unsigned long		rx_fifofull;
+	unsigned long		tx_fifomask;
+	unsigned long		tx_fifoshift;
+	unsigned long		tx_fifofull;
+
+	/* clock source control */
+
+	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+	int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+
+	/* uart controls */
+	int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
+};
+
+struct s3c24xx_uart_port {
+	unsigned char			rx_claimed;
+	unsigned char			tx_claimed;
+
+	struct s3c24xx_uart_info	*info;
+	struct s3c24xx_uart_clksrc	*clksrc;
+	struct clk			*clk;
+	struct clk			*baudclk;
+	struct uart_port		port;
+};
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
+#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+
+#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
+#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
+
+#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
+#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
+
+extern int s3c24xx_serial_probe(struct platform_device *dev,
+				struct s3c24xx_uart_info *uart);
+
+extern int s3c24xx_serial_remove(struct platform_device *dev);
+
+extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
+				      struct s3c24xx_uart_info *uart);
+
+extern int s3c24xx_serial_init(struct platform_driver *drv,
+			       struct s3c24xx_uart_info *info);
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+#define s3c24xx_console_init(__drv, __inf)			\
+static int __init s3c_serial_console_init(void)			\
+{								\
+	return s3c24xx_serial_initconsole(__drv, __inf);	\
+}								\
+								\
+console_initcall(s3c_serial_console_init)
+
+#else
+#define s3c24xx_console_init(drv, inf) extern void no_console(void)
+#endif
+
+#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
+
+extern void printascii(const char *);
+
+static void dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsprintf(buff, fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+#else
+#define dbg(x...) do { } while (0)
+#endif