summaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
authorSreekanth Reddy <sreekanth.reddy@broadcom.com>2021-11-17 16:20:58 +0530
committerMartin K. Petersen <martin.petersen@oracle.com>2021-11-18 22:38:59 -0500
commit91202a01a2fb2b78da3d03811b6d3d973ae426aa (patch)
treeae646dea27aaff44922dfb0be1f9e585040dffe5 /drivers/scsi
parent0ee4ba13e09c9d9c1cb6abb59da8295d9952328b (diff)
scsi: mpt3sas: Fix system going into read-only mode
While determining the SAS address of a drive, the driver checks whether the handle number is less than the HBA phy count or not. If the handle number is less than the HBA phy count then driver assumes that this handle belongs to HBA and hence it assigns the HBA SAS address. During IOC firmware downgrade operation, if the number of HBA phys is reduced and the OS drive's device handle drops below the phy count while determining the drive's SAS address, the driver ends up using the HBA's SAS address. This leads to a mismatch of drive's SAS address and hence the driver unregisters the OS drive and the system goes into read-only mode. Update the IOC's num_phys to the HBA phy count provided by actual loaded firmware. Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.h4
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c57
2 files changed, 60 insertions, 1 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index db6a759de1e9..a0af986633d2 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -142,6 +142,8 @@
#define MPT_MAX_CALLBACKS 32
+#define MPT_MAX_HBA_NUM_PHYS 32
+
#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
/* reserved for issuing internally framed scsi io cmds */
#define INTERNAL_SCSIIO_CMDS_COUNT 3
@@ -798,6 +800,7 @@ struct _sas_phy {
* @enclosure_handle: handle for this a member of an enclosure
* @device_info: bitwise defining capabilities of this sas_host/expander
* @responding: used in _scsih_expander_device_mark_responding
+ * @nr_phys_allocated: Allocated memory for this many count phys
* @phy: a list of phys that make up this sas_host/expander
* @sas_port_list: list of ports attached to this sas_host/expander
* @port: hba port entry containing node's port number info
@@ -813,6 +816,7 @@ struct _sas_node {
u16 enclosure_handle;
u64 enclosure_logical_id;
u8 responding;
+ u8 nr_phys_allocated;
struct hba_port *port;
struct _sas_phy *phy;
struct list_head sas_port_list;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index bb0036b41825..00792767c620 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -6406,11 +6406,26 @@ _scsih_sas_port_refresh(struct MPT3SAS_ADAPTER *ioc)
int i, j, count = 0, lcount = 0;
int ret;
u64 sas_addr;
+ u8 num_phys;
drsprintk(ioc, ioc_info(ioc,
"updating ports for sas_host(0x%016llx)\n",
(unsigned long long)ioc->sas_hba.sas_address));
+ mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+ if (!num_phys) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ if (num_phys > ioc->sas_hba.nr_phys_allocated) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return;
+ }
+ ioc->sas_hba.num_phys = num_phys;
+
port_table = kcalloc(ioc->sas_hba.num_phys,
sizeof(struct hba_port), GFP_KERNEL);
if (!port_table)
@@ -6611,6 +6626,30 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
ioc->sas_hba.phy[i].hba_vphy = 1;
}
+ /*
+ * Add new HBA phys to STL if these new phys got added as part
+ * of HBA Firmware upgrade/downgrade operation.
+ */
+ if (!ioc->sas_hba.phy[i].phy) {
+ if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply,
+ &phy_pg0, i))) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ continue;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ continue;
+ }
+ ioc->sas_hba.phy[i].phy_id = i;
+ mpt3sas_transport_add_host_phy(ioc,
+ &ioc->sas_hba.phy[i], phy_pg0,
+ ioc->sas_hba.parent_dev);
+ continue;
+ }
ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
AttachedDevHandle);
@@ -6622,6 +6661,19 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
attached_handle, i, link_rate,
ioc->sas_hba.phy[i].port);
}
+ /*
+ * Clear the phy details if this phy got disabled as part of
+ * HBA Firmware upgrade/downgrade operation.
+ */
+ for (i = ioc->sas_hba.num_phys;
+ i < ioc->sas_hba.nr_phys_allocated; i++) {
+ if (ioc->sas_hba.phy[i].phy &&
+ ioc->sas_hba.phy[i].phy->negotiated_linkrate >=
+ SAS_LINK_RATE_1_5_GBPS)
+ mpt3sas_transport_update_links(ioc,
+ ioc->sas_hba.sas_address, 0, i,
+ MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED, NULL);
+ }
out:
kfree(sas_iounit_pg0);
}
@@ -6654,7 +6706,10 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
__FILE__, __LINE__, __func__);
return;
}
- ioc->sas_hba.phy = kcalloc(num_phys,
+
+ ioc->sas_hba.nr_phys_allocated = max_t(u8,
+ MPT_MAX_HBA_NUM_PHYS, num_phys);
+ ioc->sas_hba.phy = kcalloc(ioc->sas_hba.nr_phys_allocated,
sizeof(struct _sas_phy), GFP_KERNEL);
if (!ioc->sas_hba.phy) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",